ELTEX-BRIDGE-ERPS-MIB: View SNMP OID List / Download MIB

VENDOR: ELTEX ENTERPRISE


 Home MIB: ELTEX-BRIDGE-ERPS-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 eltexErpsMIB 1.3.6.1.4.1.35265.35.1.1
The MIB module for managing Ethernet Ring Protection Switching.
     eltexErpsCtrl 1.3.6.1.4.1.35265.35.1.1.1
         eltexErpsAdminState 1.3.6.1.4.1.35265.35.1.1.1.1 eltexerpsenabledstate read-write
This object indicates the ERPS state of the bridge.
         eltexErpsLogState 1.3.6.1.4.1.35265.35.1.1.1.2 eltexerpsenabledstate read-write
This object indicates the ERPS log state of the bridge.
         eltexErpsTrapState 1.3.6.1.4.1.35265.35.1.1.1.3 eltexerpsenabledstate read-write
This object indicates the ERPS trap state of the bridge.
         eltexErpsPendingAction 1.3.6.1.4.1.35265.35.1.1.1.5 integer read-write
The action to be done with the pending configuration. copyPendingActive - to copy the pending erps configuration to the active one. copyActivePending - to copy the active erps configuration to the pending one. Enumeration: 'copyPendingActive': 1, 'copyActivePending': 2.
         eltexErpsPendingActionVlan 1.3.6.1.4.1.35265.35.1.1.1.6 integer read-write
Variable is associated with eltexErpsPendingAction and determines vlan_tag number in config for action copying/revert on pending config
         eltexErpsGetConfigId 1.3.6.1.4.1.35265.35.1.1.1.7 integer read-write
Set config id fot snmp get. Enumeration: 'active': 1, 'pending': 2.
     eltexErpsInfo 1.3.6.1.4.1.35265.35.1.1.2
     eltexErpsMgmt 1.3.6.1.4.1.35265.35.1.1.3
         eltexErpsMgmtRAPSVlanTable 1.3.6.1.4.1.35265.35.1.1.3.1 no-access
This table contains ERPS ring configuration information.
             eltexErpsMgmtRAPSVlanEntry 1.3.6.1.4.1.35265.35.1.1.3.1.1 no-access
A list of ERPS ring configuration information.
                 eltexErpsMgmtRAPSVlanId 1.3.6.1.4.1.35265.35.1.1.3.1.1.1 integer read-only
The RAPS VLAN is an index of configuration.
                 eltexErpsMgmtRAPSWestPort 1.3.6.1.4.1.35265.35.1.1.3.1.1.2 integer read-write
This is one of the Ethernet ring ports. The value 0 indicates the west port is a virtual channel.
                 eltexErpsMgmtRAPSWestPortState 1.3.6.1.4.1.35265.35.1.1.3.1.1.3 eltexerpsmgmtrapsportstate read-only
This is the west port state. It may change sometimes. When the west port is configured on a virtual channel, the west port state is always fowarding.
                 eltexErpsMgmtRAPSEastPort 1.3.6.1.4.1.35265.35.1.1.3.1.1.4 integer read-write
This is the other Ethernet ring port. The value 0 indicates the west port is a virtual channel.
                 eltexErpsMgmtRAPSEastPortState 1.3.6.1.4.1.35265.35.1.1.3.1.1.5 eltexerpsmgmtrapsportstate read-only
This is the east port state. It may change sometimes. When the east port is configured on a virtual channel, the east port state is always fowarding.
                 eltexErpsMgmtRAPSRPLPort 1.3.6.1.4.1.35265.35.1.1.3.1.1.6 eltexerpsmgmtrapsportid read-write
When the port Enable state is enabled, the RPL port's current port role is defined by the application of the ERPS.
                 eltexErpsMgmtRAPSRPLOwnerAdminState 1.3.6.1.4.1.35265.35.1.1.3.1.1.7 eltexerpsenabledstate read-write
The administrative value of the RPL owner state. The RPL owner is an Ethernet Ring Node adjacent to the RPL that is responsible for blocking its end of the RPL under normal conditions.
                 eltexErpsMgmtRAPSRingMEL 1.3.6.1.4.1.35265.35.1.1.3.1.1.8 integer read-write
The ring MEL is the maintenance entity group (MEG) level providing a communication channel for ring automatic protection switching (RAPS) information.
                 eltexErpsMgmtRAPSHoldOffTime 1.3.6.1.4.1.35265.35.1.1.3.1.1.9 integer read-write
In order to coordinate timing of protection switches at multiple layers.
                 eltexErpsMgmtRAPSGuardTime 1.3.6.1.4.1.35265.35.1.1.3.1.1.10 integer read-write
This is used to prevent ring nodes from receiving outdated RAPS messages.
                 eltexErpsMgmtRAPSWTRTime 1.3.6.1.4.1.35265.35.1.1.3.1.1.11 integer read-write
In the revertive mode of operation, to prevent frequent operation of the protection switch due to an intermittent defect, a failed working transport entity must become stable in a fault-free state.
                 eltexErpsMgmtRAPSRingState 1.3.6.1.4.1.35265.35.1.1.3.1.1.12 integer read-only
This indicates the state of the ring: begin, init, idle, or protection. Enumeration: 'forced-switch': 5, 'manual-switch': 4, 'idle': 2, 'init': 1, 'protection': 3, 'pending': 6.
                 eltexErpsMgmtRAPSRingAdminState 1.3.6.1.4.1.35265.35.1.1.3.1.1.13 eltexerpsenabledstate read-write
This indicates the administrative state of the ring.
                 eltexErpsMgmtRAPSRPLOwnerOperStatus 1.3.6.1.4.1.35265.35.1.1.3.1.1.14 integer read-only
The current operational value of the RPL owner state. The value 'active' is used to indicate that the RPL owner administrative state is enabled and the device is operated as the active RPL owner. The value 'inactive' is used to indicate that the RPL owner administrative state is enabled, but the device is operated as the inactive RPL owner. The value 'disabled' is used to indicate that the RPL owner administrative state of the device is disabled. Enumeration: 'active': 1, 'disabled': 3, 'inactive': 2.
                 eltexErpsMgmtRAPSProtectionVlanRangeList1to1024 1.3.6.1.4.1.35265.35.1.1.3.1.1.15 octet string read-write
This object indicates the VLAN range (1-1024) that belongs to the protection VLANs.
                 eltexErpsMgmtRAPSProtectionVlanRangeList1025to2048 1.3.6.1.4.1.35265.35.1.1.3.1.1.16 octet string read-write
This object indicates the VLAN range (1025-2048) that belongs to the protection VLANs.
                 eltexErpsMgmtRAPSProtectionVlanRangeList2049to3072 1.3.6.1.4.1.35265.35.1.1.3.1.1.17 octet string read-write
This object indicates the VLAN range (2049-3072) that belongs to the protection VLANs.
                 eltexErpsMgmtRAPSProtectionVlanRangeList3073to4094 1.3.6.1.4.1.35265.35.1.1.3.1.1.18 octet string read-write
This object indicates the VLAN range (3073-4094) that belongs to the protection VLANs.
                 eltexErpsMgmtRAPSRevertive 1.3.6.1.4.1.35265.35.1.1.3.1.1.19 truthvalue read-write
This indicates the revertive mode.
                 eltexErpsMgmtRAPSProtocolVersion 1.3.6.1.4.1.35265.35.1.1.3.1.1.20 integer read-write
This object indicates the ERPS protocol compatibility with other versions of ITU-T G.8032.
                 eltexErpsMgmtRAPSPortForcedSwitch 1.3.6.1.4.1.35265.35.1.1.3.1.1.21 eltexerpsmgmtrapsportid read-write
Forced switch port.
                 eltexErpsMgmtRAPSPortManualSwitch 1.3.6.1.4.1.35265.35.1.1.3.1.1.22 eltexerpsmgmtrapsportid read-write
Manual switch port.
                 eltexErpsMgmtRAPSRowStatus 1.3.6.1.4.1.35265.35.1.1.3.1.1.23 rowstatus read-only
This object indicates the RowStatus of this entry.
         eltexErpsMgmtSubRingCtrlTable 1.3.6.1.4.1.35265.35.1.1.3.2 no-access
This table contains ERPS sub-ring configuration information.
             eltexErpsMgmtSubRingCtrlEntry 1.3.6.1.4.1.35265.35.1.1.3.2.1 no-access
A list of ERPS sub-ring configuration information.
                 eltexErpsMgmtSubRingCtrlRAPSVlanId 1.3.6.1.4.1.35265.35.1.1.3.2.1.1 integer no-access
The RAPS VLAN is an index of configuration.
                 eltexErpsMgmtSubRingCtrlSubRingRAPSVlanId 1.3.6.1.4.1.35265.35.1.1.3.2.1.2 integer no-access
This indicates the ring control VLAN-ID of the sub-ring which connects to another ring.
                 eltexErpsMgmtSubRingCtrlTCPropagationState 1.3.6.1.4.1.35265.35.1.1.3.2.1.3 eltexerpsenabledstate read-write
This indicates the state of sub-ring topology change propagation.
                 eltexErpsMgmtSubRingCtrlRowStatus 1.3.6.1.4.1.35265.35.1.1.3.2.1.4 rowstatus read-only
This object indicates the RowStatus of this entry.
     eltexErpsNotify 1.3.6.1.4.1.35265.35.1.1.4
         eltexErpsNotifyPrefix 1.3.6.1.4.1.35265.35.1.1.4.0
             eltexErpsSFDetectedTrap 1.3.6.1.4.1.35265.35.1.1.4.0.1
When the signal fail occurs, a trap will be generated.
             eltexErpsSFClearedTrap 1.3.6.1.4.1.35265.35.1.1.4.0.2
When the signal fail clears, a trap will be generated.
             eltexErpsRPLOwnerConflictTrap 1.3.6.1.4.1.35265.35.1.1.4.0.3
When a conflict occurs, a trap will be generated.
         eltexErpsNotificationBindings 1.3.6.1.4.1.35265.35.1.1.4.2
             eltexErpsNodeId 1.3.6.1.4.1.35265.35.1.1.4.2.1 macaddress no-access
This used trap object means the node MAC.