EICON-MIB-ROUTER: View SNMP OID List / Download MIB

VENDOR: EICON


 Home MIB: EICON-MIB-ROUTER
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 eicon 1.3.6.1.4.1.434
         management 1.3.6.1.4.1.434.2
             mibv2 1.3.6.1.4.1.434.2.2
                 module 1.3.6.1.4.1.434.2.2.4
                 router 1.3.6.1.4.1.434.2.2.8
                     rtName 1.3.6.1.4.1.434.2.2.8.1 displaystring read-only
The name advertised by the router agent using SAP.
                     rtProductName 1.3.6.1.4.1.434.2.2.8.2 displaystring read-only
The Product name ie. Router for Netware.
                     rtReleaseVersion 1.3.6.1.4.1.434.2.2.8.3 integer read-only
Ex.: Ver. 3 Rel. 2.
                     rtReleaseDate 1.3.6.1.4.1.434.2.2.8.4 integer read-only
Format: 1993/03/25.
                     rtOperState 1.3.6.1.4.1.434.2.2.8.5 operstate read-only
The operational state of the router.
                     rtAdminStateCtr 1.3.6.1.4.1.434.2.2.8.6 adminstate read-write
The administrative state of the router. Management station will change this value to start or stop the router.
                     rtType 1.3.6.1.4.1.434.2.2.8.7 integer read-only
Type of router. Enumeration: 'typeSynOpticsRouter': 5, 'typeNetWareRouter': 1, 'typeMadrasRouter': 6, 'typeUnixRouter': 3, 'typeNTRouter': 4, 'typeOS2Router': 2.
                     rtTimeUp 1.3.6.1.4.1.434.2.2.8.8 timeticks read-only
The time elapsed since the router was started.
                     rtNumberOfPorts 1.3.6.1.4.1.434.2.2.8.9 integer read-only
The number of Eicon ports currently used by the router.
                     rtMaxCircuits 1.3.6.1.4.1.434.2.2.8.10 integer read-only
The maximum number of connections that can be configured for this router.
                     rtAvailableCircuits 1.3.6.1.4.1.434.2.2.8.11 gauge read-only
The number of connections still available for this router.
                     rtAvailableLANMapping 1.3.6.1.4.1.434.2.2.8.12 gauge read-only
The available number of LAN protocol mappings for all connections.
                     rtMaxLANMapping 1.3.6.1.4.1.434.2.2.8.13 integer read-only
The maximum number of LAN protocol mappings for all connections.
                     rtGlobalTxPackets 1.3.6.1.4.1.434.2.2.8.14 counter read-only
The number of packets transmitted by the router on all ports
                     rtGlobalTxBytesLow 1.3.6.1.4.1.434.2.2.8.15 counter read-only
The number of bytes transmitted by the router on all ports - the low 32 bits of the 64 bits counter.
                     rtGlobalTxBytesHigh 1.3.6.1.4.1.434.2.2.8.16 counter read-only
The number of bytes transmitted by the router on all ports - the high 32 bits of the 64 bits counter.
                     rtGlobalRxPackets 1.3.6.1.4.1.434.2.2.8.17 counter read-only
The number of packets received by the router on all ports
                     rtGlobalRxBytesLow 1.3.6.1.4.1.434.2.2.8.18 counter read-only
The number of bytes received by the router on all ports - the low 32 bits of the 64 bits counter.
                     rtGlobalRxBytesHigh 1.3.6.1.4.1.434.2.2.8.19 counter read-only
The number of bytes received by the router on all ports - the high 32 bits of the 64 bits counter.
                     rtGlobalTxDropNoRoute 1.3.6.1.4.1.434.2.2.8.20 counter read-only
The number of transmit packets dropped on all ports because no route was found.
                     rtGlobalTxDropNoResource 1.3.6.1.4.1.434.2.2.8.21 counter read-only
The number of transmit packets dropped on all ports because resources were exhausted.
                     rtGlobalTxDropUnknownProt 1.3.6.1.4.1.434.2.2.8.22 counter read-only
The number of transmit packets dropped because the WAN protocol is not supported.
                     rtGlobalRxDropNoResource 1.3.6.1.4.1.434.2.2.8.23 counter read-only
The number of received packets dropped on all ports because resources were exhausted.
                     rtGlobalRxDropUnknownProt 1.3.6.1.4.1.434.2.2.8.24 counter read-only
The number of received packets dropped because a LAN protocol is not supported.
                     rtGlobalRxError 1.3.6.1.4.1.434.2.2.8.25 counter read-only
The number of errors encountered when receiving from the EiconCard(s).
                     rtGlobalCountersReset 1.3.6.1.4.1.434.2.2.8.26 controlonoff read-write
This variable is used to reset all router global counters.
                     rtTraceCtrl 1.3.6.1.4.1.434.2.2.8.27 controlonoff read-write
This object is used to start or stop the trace with the parameters specified by the following trace objects.
                     rtTraceFileName 1.3.6.1.4.1.434.2.2.8.28 displaystring read-write
The (fully qualified) file name for the file which will hold the trace.
                     rtTraceInterfaceType 1.3.6.1.4.1.434.2.2.8.29 integer read-write
The mask which indicates to the Agent the interface type(s) to be traced. The trace value for the lower layer is (1) and for the upper layer is (2).
                     rtPortTable 1.3.6.1.4.1.434.2.2.8.30 no-access
The router port table.
                           rtPortEntry 1.3.6.1.4.1.434.2.2.8.30.1 no-access
The router information for one port.
                               rtPortIndex 1.3.6.1.4.1.434.2.2.8.30.1.1 integer read-only
Index of this table
                               rtPortNumber 1.3.6.1.4.1.434.2.2.8.30.1.2 integer read-only
EiconCard port number.
                               rtPortProtocol 1.3.6.1.4.1.434.2.2.8.30.1.3 integer read-only
Mask indicating the choice of WAN protocols: x25 (1), fr (2), ppp (4), sna (8), hdlc (16).
                               rtPortTxThroughput 1.3.6.1.4.1.434.2.2.8.30.1.4 gauge read-only
Throughput calculated for the transmision.
                               rtPortRxThroughput 1.3.6.1.4.1.434.2.2.8.30.1.5 gauge read-only
Throughput calculated for the reception.
                               rtPortTxPackets 1.3.6.1.4.1.434.2.2.8.30.1.6 counter read-only
Number of packets transmitted for this port.
                               rtPortTxBytesLow 1.3.6.1.4.1.434.2.2.8.30.1.7 counter read-only
Number of bytes transmitted for this port; the low 32 bits of the 64 bits counter.
                               rtPortTxBytesHigh 1.3.6.1.4.1.434.2.2.8.30.1.8 counter read-only
Number of bytes transmitted for this port; the high 32 bits of the 64 bits counter.
                               rtPortRxPackets 1.3.6.1.4.1.434.2.2.8.30.1.9 counter read-only
Number of packets received for this port.
                               rtPortRxBytesLow 1.3.6.1.4.1.434.2.2.8.30.1.10 counter read-only
Number of bytes received for this port; the low 32 bits of the 64 bits counter.
                               rtPortRxBytesHigh 1.3.6.1.4.1.434.2.2.8.30.1.11 counter read-only
Number of bytes received for this port; the high 32 bits of the 64 bits counter.
                               rtPortTxDropNoResource 1.3.6.1.4.1.434.2.2.8.30.1.12 counter read-only
Number of transmit packets dropped because no resources were available.
                               rtPortRxError 1.3.6.1.4.1.434.2.2.8.30.1.13 counter read-only
Number of packets received with an EiconCard error.
                               rtPortCountersReset 1.3.6.1.4.1.434.2.2.8.30.1.14 controlonoff read-write
This object is used to reset the values of all counters for this port.
                     rtConnFreeIndex 1.3.6.1.4.1.434.2.2.8.31 integer read-only
The index value used by the Management station to create the row in the rtConnTable. This value will be used to identify new instance of rtConnEntryStatus object when the Management station attempts to write its value to createRequest (2). If the Agent accepts this value it will change it to underCreation (3). After that, the Management station has a limited time to create all remaining objects in the rtConnEntry and change rtConnEntryStatus to valid (1) or abandon and change rtConnEntryStatus to invalid (4). The entries with the invalid (4) state can be deleted from the table by the Agent.
                     rtConnTable 1.3.6.1.4.1.434.2.2.8.32 no-access
The table of WAN connections to peer routers.
                           rtConnEntry 1.3.6.1.4.1.434.2.2.8.32.1 no-access
The routing information for one destination.
                               rtConnIndex 1.3.6.1.4.1.434.2.2.8.32.1.1 integer read-only
The index used to identify the connection entry.
                               rtConnName 1.3.6.1.4.1.434.2.2.8.32.1.2 displaystring read-write
The name used to identify the connection entry.
                               rtConnComment 1.3.6.1.4.1.434.2.2.8.32.1.3 displaystring read-write
Optional comment about the connection entry.
                               rtConnEntryStatus 1.3.6.1.4.1.434.2.2.8.32.1.4 entrystatus read-write
The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not.
                               rtConnOperState 1.3.6.1.4.1.434.2.2.8.32.1.5 operstate read-only
The object describing the state of the connection.
                               rtConnAdminStateCtr 1.3.6.1.4.1.434.2.2.8.32.1.6 adminstate read-write
The object used to start and stop the circuit for this connection entry.
                               rtConnAutoStart 1.3.6.1.4.1.434.2.2.8.32.1.7 integer read-write
The object used to indicate if the connnection should be activated every time the router starts. Yes is the default. Enumeration: 'startYes': 1, 'startNo': 2.
                               rtConnType 1.3.6.1.4.1.434.2.2.8.32.1.8 integer read-write
The type of connection. Enumeration: 'typeOut': 2, 'typeIn': 1, 'typeTwoWay': 3.
                               rtConnInactivityTimeout 1.3.6.1.4.1.434.2.2.8.32.1.9 integer read-write
The connection inactivity timeout in seconds.
                               rtConnPortNumber 1.3.6.1.4.1.434.2.2.8.32.1.10 portref read-write
The EiconCard port number for this connection.
                               rtConnCompression 1.3.6.1.4.1.434.2.2.8.32.1.11 integer read-write
The object indicating the type of compression to use, if any. Enumeration: 'comprStac': 2, 'comprNo': 1, 'comprOther': 3.
                               rtConnRetryNum 1.3.6.1.4.1.434.2.2.8.32.1.12 integer read-write
The connection retry count; value (0) indicates no retry, value (100) indicates infinite retry, value (5) is the default.
                               rtConnRetryDelay 1.3.6.1.4.1.434.2.2.8.32.1.13 integer read-write
The connection retry delay in seconds.
                               rtConnPeerRouter 1.3.6.1.4.1.434.2.2.8.32.1.14 integer read-write
The type of the peer router for this connection. Enumeration: 'peerNetWareNLM': 2, 'peerUniversal': 3, 'peerNetWareV2': 1, 'peerCISCO': 4.
                               rtConnLanProtocol 1.3.6.1.4.1.434.2.2.8.32.1.15 integer read-write
The mask used to indicate the type of LAN protocols used for this connection. IPX =1, IP=2, AT=4.
                               rtConnWanProtocol 1.3.6.1.4.1.434.2.2.8.32.1.16 integer read-write
The object indicates which WAN protocol will be used for this connection. Enumeration: 'connHdlc': 6, 'connX25Pvc': 2, 'connPpp': 4, 'connFr': 3, 'connSna': 5, 'connX25Svc': 1.
                               rtConnX25LocalDTE 1.3.6.1.4.1.434.2.2.8.32.1.17 displaystring read-write
The X25 Local DTE Address configured for this connection.
                               rtConnX25RemoteDTE 1.3.6.1.4.1.434.2.2.8.32.1.18 displaystring read-write
The X25 Remote DTE Address configured for this connection.
                               rtConnX25CallingFacilities 1.3.6.1.4.1.434.2.2.8.32.1.19 displaystring read-write
The X25 Calling Facilities configured for this connection.
                               rtConnX25ListeningFacilities 1.3.6.1.4.1.434.2.2.8.32.1.20 displaystring read-write
The X25 Listening Facilities configured for this connection.
                               rtConnX25UserData 1.3.6.1.4.1.434.2.2.8.32.1.21 displaystring read-write
The X25 User Data configured for this connection.
                               rtConnX25Pvc 1.3.6.1.4.1.434.2.2.8.32.1.22 integer read-write
The X25 PVC configured for this connection.
                               rtConnFrDlci 1.3.6.1.4.1.434.2.2.8.32.1.23 integer read-write
The Frame Relay DLCI configured for this connection.
                               rtConnSnaPuName 1.3.6.1.4.1.434.2.2.8.32.1.24 displaystring read-write
Physical Unit Name.
                               rtConnSnaLocalFqName 1.3.6.1.4.1.434.2.2.8.32.1.25 displaystring read-write
Local fully qualified name.
                               rtConnSnaRemoteFqName 1.3.6.1.4.1.434.2.2.8.32.1.26 displaystring read-write
Remote fully qualified name.
                               rtConnSnaModeName 1.3.6.1.4.1.434.2.2.8.32.1.27 displaystring read-write
Mode name.
                               rtConnSnaSendPaceWindow 1.3.6.1.4.1.434.2.2.8.32.1.28 integer read-write
Send Pace Window.
                               rtConnSnaReceivePaceWindow 1.3.6.1.4.1.434.2.2.8.32.1.29 integer read-write
Receive Pace Window.
                               rtConnSnaRuSendLow 1.3.6.1.4.1.434.2.2.8.32.1.30 integer read-write
Request Unit send low.
                               rtConnSnaRuReceiveLow 1.3.6.1.4.1.434.2.2.8.32.1.31 integer read-write
Request Unit receive low.
                               rtConnSnaRuSendHigh 1.3.6.1.4.1.434.2.2.8.32.1.32 integer read-write
Request Unit send high.
                               rtConnSnaRuReceiveHigh 1.3.6.1.4.1.434.2.2.8.32.1.33 integer read-write
Request unit receive high.
                               rtConnUsage 1.3.6.1.4.1.434.2.2.8.32.1.34 integer read-write
The connection can be defined as a primary or a backup connection for a primary. Enumeration: 'uSagePrimary': 1, 'uSageBackup': 2.
                               rtConnFrSegmentation 1.3.6.1.4.1.434.2.2.8.32.1.35 integer read-write
The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this connection. Enumeration: 'yes': 2, 'inProgress': 3, 'no': 1.
                               rtConnFrXid 1.3.6.1.4.1.434.2.2.8.32.1.36 integer read-write
The object used to indicate if the Frame-relay XID (RFC1490) can be used on this connection Enumeration: 'yes': 2, 'inProgress': 3, 'no': 1.
                               rtConnPrimOrBackName 1.3.6.1.4.1.434.2.2.8.32.1.37 displaystring read-write
This parameter applies only if the rtConnFunction field=FuncPrimary. This is the name used to identify primary connection entry.
                               rtConnRipSapUpdateType 1.3.6.1.4.1.434.2.2.8.32.1.38 integer read-write
The update type of RIP / SAP. Enumeration: 'none': 1, 'onchange': 2, 'periodic': 3.
                               rtConnSAPDelay 1.3.6.1.4.1.434.2.2.8.32.1.39 integer read-write
The delay in minutes between the SAP updates on this WAN connection.
                               rtConnRIPDelay 1.3.6.1.4.1.434.2.2.8.32.1.40 integer read-write
The delay in minutes between the RIP updates on this WAN connection.
                     rtIPMapFreeIndex 1.3.6.1.4.1.434.2.2.8.33 integer read-only
The index value used by the Management station to create the row in the rtIPMappingTable. This value will be used to identify new instance of rtIPMapEntryStatus object when the Management station attempts to write its value to createRequest (2). If the Agent accepts this value it will change it to underCreation (3). After that, the Management station has a limited time to create all remaining objects in the rtIPMappingEntry and change rtIPMapEntryStatus to valid (1) or abandon and change rtIPMapEntryStatus to invalid (4). The entries with the invalid (4) state can be deleted from the table by the Agent.
                     rtIPMappingTable 1.3.6.1.4.1.434.2.2.8.34 no-access
The IP mapping table.
                           rtIPMappingEntry 1.3.6.1.4.1.434.2.2.8.34.1 no-access
One mapping information entry.
                               rtIPMapIndex 1.3.6.1.4.1.434.2.2.8.34.1.1 integer read-only
The index used to identify the mapping entry. It is possible to have multiple LAN mapping entries for one connection.
                               rtIPMapConnIndex 1.3.6.1.4.1.434.2.2.8.34.1.2 integer read-write
Indicates the connection which uses this mapping. It is equal to one of the rtConnIndex values from the rtConnTable.
                               rtIPMapEntryStatus 1.3.6.1.4.1.434.2.2.8.34.1.3 entrystatus read-write
The object used to reserve the mapping entry during the row creation. It also indicates if the entry is valid or not.
                               rtIPMapNextHop 1.3.6.1.4.1.434.2.2.8.34.1.4 ipaddress read-write
The address of the next hop. It is indicated if the Management station knows the address and it can not be discovered by the router.
                               rtIPMapBroadcast 1.3.6.1.4.1.434.2.2.8.34.1.5 integer read-write
The object which indicates to the router if it may send broadcasts for this connection. 'Yes' is the default value. Enumeration: 'broadYes': 2, 'broadNo': 1.
                               rtIPMapIPMask 1.3.6.1.4.1.434.2.2.8.34.1.6 ipaddress read-write
The IP address mask to be used for this mapping.
                               rtIPMapVJCompress 1.3.6.1.4.1.434.2.2.8.34.1.7 integer read-write
The object which indicates if the VanJacobsen compression is to be used for this mapping. Enumeration: 'vjNo': 1, 'vjYes': 2.
                     rtCircuitTable 1.3.6.1.4.1.434.2.2.8.35 no-access
The router circuit table.
                           rtCircuitEntry 1.3.6.1.4.1.434.2.2.8.35.1 no-access
The circuit information for one WAN connection. An entry in this table will be created by the Agent when the circuit is opened for a specified connection.
                               rtCircuitConnIndex 1.3.6.1.4.1.434.2.2.8.35.1.1 integer read-only
Indicates the connection which generated this circuit. It is equal to one of the rtConnIndex values from the rtConnTable.
                               rtCircuitStatus 1.3.6.1.4.1.434.2.2.8.35.1.2 integer read-only
Indicates the circuit status. Enumeration: 'hangingup': 4, 'unknown': 10, 'listening': 1, 'notbound': 9, 'calling': 2, 'idle': 7, 'connected': 3, 'hungup': 5, 'aborted': 6, 'portdisconnected': 8.
                               rtCircuitTimeUp 1.3.6.1.4.1.434.2.2.8.35.1.3 timeticks read-only
Time elapsed since this circuit was started.
                               rtCircuitErrCode 1.3.6.1.4.1.434.2.2.8.35.1.4 integer read-only
Last error code returned from the EiconCard.
                               rtCircuitSessionType 1.3.6.1.4.1.434.2.2.8.35.1.5 integer read-only
Type of circuit session.
                               rtCircuitConnLSN 1.3.6.1.4.1.434.2.2.8.35.1.6 integer read-only
Connection Manager LSN used for management.
                               rtCircuitDataLSN 1.3.6.1.4.1.434.2.2.8.35.1.7 integer read-only
Connection Manager LSN used for data.
                               rtCircuitCmSelector 1.3.6.1.4.1.434.2.2.8.35.1.8 integer read-only
Handle returned by Connection Manager for this circuit.
                               rtCircuitCompression 1.3.6.1.4.1.434.2.2.8.35.1.9 integer read-only
Compression on/off, after negotiation.
                               rtCircuitCompAlgorithm 1.3.6.1.4.1.434.2.2.8.35.1.10 integer read-only
Compression type, after negotiation.
                               rtCircuitBeforeComp 1.3.6.1.4.1.434.2.2.8.35.1.11 gauge read-only
Number of bytes sent before compression.
                               rtCircuitAfterComp 1.3.6.1.4.1.434.2.2.8.35.1.12 gauge read-only
Number of bytes sent after compression.
                               rtCircuitTxErr 1.3.6.1.4.1.434.2.2.8.35.1.13 integer read-only
The number of Transmit errors
                               rtCircuitBoundLANProtocol 1.3.6.1.4.1.434.2.2.8.35.1.14 integer read-only
The mask used to indicate the type of LAN protocols used for this connection. Possible values are: IPX=1, IP=2, AT=4.
                               rtCircuitRemoteRouter 1.3.6.1.4.1.434.2.2.8.35.1.15 displaystring read-only
The name of the remote router discovered by the local router.
                               rtCircuitCountersReset 1.3.6.1.4.1.434.2.2.8.35.1.16 controlonoff read-write
The object is used to reset all counters for this circuit.
                               rtCircuitWanProtocol 1.3.6.1.4.1.434.2.2.8.35.1.17 integer read-only
The object indicates which WAN protocol will be used for this connection. Enumeration: 'connHdlc': 6, 'connX25Pvc': 2, 'connPpp': 4, 'connFr': 3, 'connSna': 5, 'connX25Svc': 1.
                               rtCircuitX25LocalDTE 1.3.6.1.4.1.434.2.2.8.35.1.18 displaystring read-only
The X25 Local DTE Address for this circuit
                               rtCircuitX25RemoteDTE 1.3.6.1.4.1.434.2.2.8.35.1.19 displaystring read-only
The X25 Remote DTE Address for this circuit
                               rtCircuitX25CallingFacilities 1.3.6.1.4.1.434.2.2.8.35.1.20 displaystring read-only
The X25 Calling Facilities for this circuit
                               rtCircuitX25ListeningFacilities 1.3.6.1.4.1.434.2.2.8.35.1.21 displaystring read-only
The X25 Listening Facilities for this circuit
                               rtCircuitX25UserData 1.3.6.1.4.1.434.2.2.8.35.1.22 displaystring read-only
The X25 User Data for this circuit
                               rtCircuitX25Cause 1.3.6.1.4.1.434.2.2.8.35.1.23 integer read-only
The Cause of Circuit connection failure
                               rtCircuitX25Diag 1.3.6.1.4.1.434.2.2.8.35.1.24 integer read-only
Diagnostics code of the Circuit connection failure.
                               rtCircuitX25Pvc 1.3.6.1.4.1.434.2.2.8.35.1.25 integer read-only
The X25 PVC for this circuit.
                               rtCircuitFrDlci 1.3.6.1.4.1.434.2.2.8.35.1.26 integer read-only
The Frame Relay DLCI for this circuit.
                               rtCircuitFrSegmentation 1.3.6.1.4.1.434.2.2.8.35.1.27 integer read-only
The object used to indicate if the Frame Relay segmentation (RFC1490) can be used on this circuit. Enumeration: 'yes': 2, 'inProgress': 3, 'no': 1.
                               rtCircuitFrXIDNegot 1.3.6.1.4.1.434.2.2.8.35.1.28 integer read-only
The object used to indicate if the Frame Relay XID (RFC1490) can be used on this circuit. Enumeration: 'yes': 2, 'inProgress': 3, 'no': 1.
                               rtCircuitFrXIDPacketSize 1.3.6.1.4.1.434.2.2.8.35.1.29 integer read-only
The size of the Frame Relay XID packet.
                               rtCircuitFrCongestion 1.3.6.1.4.1.434.2.2.8.35.1.30 integer read-only
The object indicates if Frame Relay can be congested on this circuit. Enumeration: 'noCongestion': 1, 'congested': 2.
                     rtCircuitIPTable 1.3.6.1.4.1.434.2.2.8.36 no-access
The router IP info table.
                           rtCircuitIPEntry 1.3.6.1.4.1.434.2.2.8.36.1 no-access
The circuit information specific to IP.
                               rtCircuitIPConnIndex 1.3.6.1.4.1.434.2.2.8.36.1.1 integer read-only
Indicates the connection which generated this circuit. It is equal to one of the rtConnIndex values from the rtConnTable.
                               rtCircuitIPRemoteAddress 1.3.6.1.4.1.434.2.2.8.36.1.2 ipaddress read-only
Remote router IP address.
                               rtCircuitIPLocalAddress 1.3.6.1.4.1.434.2.2.8.36.1.3 ipaddress read-only
Local router IP address.
                               rtCircuitIPTxPackets 1.3.6.1.4.1.434.2.2.8.36.1.4 counter read-only
Number of transmit packets which carry IP.
                               rtCircuitIPTxBytes 1.3.6.1.4.1.434.2.2.8.36.1.5 counter read-only
Number of transmit bytes which carry IP.
                               rtCircuitIPRxPackets 1.3.6.1.4.1.434.2.2.8.36.1.6 counter read-only
Number of received packets which carry IP.
                               rtCircuitIPRxBytes 1.3.6.1.4.1.434.2.2.8.36.1.7 counter read-only
Number of received bytes which carry IP.
                     rtCircuitIPXTable 1.3.6.1.4.1.434.2.2.8.37 no-access
The router IPX info table.
                           rtCircuitIPXEntry 1.3.6.1.4.1.434.2.2.8.37.1 no-access
The circuit information.
                               rtCircuitIPXConnIndex 1.3.6.1.4.1.434.2.2.8.37.1.1 integer read-only
Indicates the connection which generated this circuit.It is equal to one of the rtConnIndex values from the rtConnTable.
                               rtCircuitIPXRemoteNode 1.3.6.1.4.1.434.2.2.8.37.1.2 octet string read-only
Remote router node address.
                               rtCircuitIPXRemoteNetwork 1.3.6.1.4.1.434.2.2.8.37.1.3 octet string read-only
Remote router network address.
                               rtCircuitIPXLocalNode 1.3.6.1.4.1.434.2.2.8.37.1.4 octet string read-only
Local router node address.
                               rtCircuitIPXLocalNetwork 1.3.6.1.4.1.434.2.2.8.37.1.5 octet string read-only
Local router network address.
                               rtCircuitIPXTxPackets 1.3.6.1.4.1.434.2.2.8.37.1.6 counter read-only
Number of transmit packets which carry IPX.
                               rtCircuitIPXTxBytes 1.3.6.1.4.1.434.2.2.8.37.1.7 counter read-only
Number of transmit bytes which carry IPX.
                               rtCircuitIPXRxPackets 1.3.6.1.4.1.434.2.2.8.37.1.8 counter read-only
Number of received packets which carry IPX.
                               rtCircuitIPXRxBytes 1.3.6.1.4.1.434.2.2.8.37.1.9 counter read-only
Number of received bytes which carry IPX.
                     rtCircuitATTable 1.3.6.1.4.1.434.2.2.8.38 no-access
The router AT info table.
                           rtCircuitATEntry 1.3.6.1.4.1.434.2.2.8.38.1 no-access
The AT circuit information.
                               rtCircuitATConnIndex 1.3.6.1.4.1.434.2.2.8.38.1.1 integer read-only
Indicates the connection which generated this circuit.It is equal to one of the rtConnIndex values from the rtConnTable.
                               rtCircuitATRemoteNet 1.3.6.1.4.1.434.2.2.8.38.1.2 octet string read-only
Remote router network address.
                               rtCircuitATRemoteNode 1.3.6.1.4.1.434.2.2.8.38.1.3 octet string read-only
Remote router node address.
                               rtCircuitATLocalNet 1.3.6.1.4.1.434.2.2.8.38.1.4 octet string read-only
Local router network address.
                               rtCircuitATLocalNode 1.3.6.1.4.1.434.2.2.8.38.1.5 octet string read-only
Local router node address.
                               rtCircuitATTxPackets 1.3.6.1.4.1.434.2.2.8.38.1.6 counter read-only
Number of transmit packets which carry AT.
                               rtCircuitATTxBytes 1.3.6.1.4.1.434.2.2.8.38.1.7 counter read-only
Number of transmit bytes which carry AT.
                               rtCircuitATRxPackets 1.3.6.1.4.1.434.2.2.8.38.1.8 counter read-only
Number of received packets which carry AT.
                               rtCircuitATRxBytes 1.3.6.1.4.1.434.2.2.8.38.1.9 counter read-only
Number of received bytes which carry AT.
                     rtMaxIPFilter 1.3.6.1.4.1.434.2.2.8.39 integer read-only
The maximum number of IP Filters that can be configured for this router.
                     rtAvailableIPFilter 1.3.6.1.4.1.434.2.2.8.40 gauge read-only
The number of IP Filters still available for this router.
                     rtIPFilterDropStatsIn 1.3.6.1.4.1.434.2.2.8.41 counter read-only
Total number of incoming packets dropped.
                     rtIPFilterDropStatsOut 1.3.6.1.4.1.434.2.2.8.42 counter read-only
Total number of outgoing packets dropped.
                     rtIPFilterForwardStatsIn 1.3.6.1.4.1.434.2.2.8.43 counter read-only
Total number of incoming packets forwarded.
                     rtIPFilterForwardStatsOut 1.3.6.1.4.1.434.2.2.8.44 counter read-only
Total number of outgoing packets forwarded.
                     rtIPFilterFreeIndex 1.3.6.1.4.1.434.2.2.8.45 integer read-only
This number indicating to the Manager the next available rtIPFilterIndex for a new Entry in the rtIPFilterTable (0 for none). The Manager will first get this value from the Agent and then use it to attempt to create an entry with that index value for any connection.
                     rtIPFilterTable 1.3.6.1.4.1.434.2.2.8.46 no-access
The IP Filter table.
                           rtIPFilterEntry 1.3.6.1.4.1.434.2.2.8.46.1 no-access
Information on an IP Filter.
                               rtIPFilterConnIndex 1.3.6.1.4.1.434.2.2.8.46.1.1 integer read-only
Same as rtConnIndex.
                               rtIPFilterIndex 1.3.6.1.4.1.434.2.2.8.46.1.2 integer read-only
Index of IP Filter for the connection.
                               rtIPFilterEntryStatus 1.3.6.1.4.1.434.2.2.8.46.1.3 entrystatusv2 read-write
The object used to reserve the connection entry during the row creation. It also indicates if the entry is valid or not.
                               rtIPFilterOperState 1.3.6.1.4.1.434.2.2.8.46.1.4 operstate read-only
The object indicates the state of the IP Filter.
                               rtIPFilterAdminStateCtr 1.3.6.1.4.1.434.2.2.8.46.1.5 adminstate read-write
The object used to start and stop the IP Filter.
                               rtIPFilterPosition 1.3.6.1.4.1.434.2.2.8.46.1.6 integer read-write
This variable indicates the order that the router should apply each filter. This field can be set only when adding a new IP Filter for a connection. The manager should use a valid rtIPFilterIndex to set this variable. The new filter will be inserted after the corresponding filter. To insert the filter at the beginning for the connection, set the variable to 0.
                               rtIPFilterAction 1.3.6.1.4.1.434.2.2.8.46.1.7 integer read-write
Drop (1) or Forward (2) the information. Enumeration: 'forward': 2, 'drop': 1.
                               rtIPFilterDirection 1.3.6.1.4.1.434.2.2.8.46.1.8 integer read-write
Specifies if the filter is applied to outgoing, incoming or both ways packets. Enumeration: 'all': 3, 'out': 2, 'in': 1.
                               rtIPFilterPortType 1.3.6.1.4.1.434.2.2.8.46.1.9 integer read-write
Protocol type. Enumeration: 'udp': 2, 'all': 3, 'tcp': 1.
                               rtIPFilterLowSrcPort 1.3.6.1.4.1.434.2.2.8.46.1.10 integer read-write
Low Source Port.
                               rtIPFilterHighSrcPort 1.3.6.1.4.1.434.2.2.8.46.1.11 integer read-write
High Source Port.
                               rtIPFilterLowDestPort 1.3.6.1.4.1.434.2.2.8.46.1.12 integer read-write
Low Destination Port.
                               rtIPFilterHighDestPort 1.3.6.1.4.1.434.2.2.8.46.1.13 integer read-write
High Destination Port.
                               rtIPFilterIPAddressSrc 1.3.6.1.4.1.434.2.2.8.46.1.14 ipaddress read-write
Source IP Address.
                               rtIPFilterIPMaskSrc 1.3.6.1.4.1.434.2.2.8.46.1.15 ipaddress read-write
Mask of the source IP Address.
                               rtIPFilterIPAddressDest 1.3.6.1.4.1.434.2.2.8.46.1.16 ipaddress read-write
Destination IP Address.
                               rtIPFilterIPMaskDest 1.3.6.1.4.1.434.2.2.8.46.1.17 ipaddress read-write
Mask of the destination IP Address.
                               rtIPFilterStatsIn 1.3.6.1.4.1.434.2.2.8.46.1.18 counter read-only
The number of incoming packets that match the filter.
                               rtIPFilterStatsOut 1.3.6.1.4.1.434.2.2.8.46.1.19 counter read-only
The number of outgoing packets that match the filter.
                     rtActionState 1.3.6.1.4.1.434.2.2.8.47 actionstate read-only
The state of the operation performed on the router by the Agent as a result of setting the values to the 'rtAdminStateCtrl'. The Management station will poll that variable after initiating an action on the router. The value done(1) indicates that the action terminated successfully. The value failed(2) indicates that the action terminated with an error. In this case the variable 'rtActionError' indicates the error code.
                     rtActionError 1.3.6.1.4.1.434.2.2.8.48 integer read-only
The error code after the unsuccessful operation. Enumeration: 'err-General': 99, 'no-error': 0, 'err-SHUTDOWN-FAILURE': 4, 'err-ALREADY-STARTED': 1, 'err-STACK-NOT-BOUND': 3, 'err-NOT-STARTED': 2.