EICON-DIALER-MIB: View SNMP OID List / Download MIB

VENDOR: EICON


 Home MIB: EICON-DIALER-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 eicon 1.3.6.1.4.1.434
         management 1.3.6.1.4.1.434.2
             mibv2 1.3.6.1.4.1.434.2.2
                 module 1.3.6.1.4.1.434.2.2.4
                     dialer 1.3.6.1.4.1.434.2.2.4.16
                           dialerInfoTable 1.3.6.1.4.1.434.2.2.4.16.1 no-access
General Information Table for dailer.
                               dialerInfoEntry 1.3.6.1.4.1.434.2.2.4.16.1.1 no-access
The set of dialer configuration attributes for one port.
                                   dialerInfoPortRef 1.3.6.1.4.1.434.2.2.4.16.1.1.1 portref read-only
The id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply.
                                   dialerInfoType 1.3.6.1.4.1.434.2.2.4.16.1.1.2 integer read-only
Type of interface connecting the gateway to local or remote host computers. Enumeration: 'none': 7, 'v32bis': 6, 'direct': 1, 'isdn-stat': 5, 'other': 8, 'at-cmd': 4, 'v22bis': 3, 'v25bis': 2.
                                   dialerInfoTimeStart 1.3.6.1.4.1.434.2.2.4.16.1.1.3 timeticks read-only
The time elapsed since the dialer was statrted.
                                   dialerInfoTimeConnect 1.3.6.1.4.1.434.2.2.4.16.1.1.4 timeticks read-only
The time elapsed since the dialer established the current connection.
                                   dialerInfoLineSpeed 1.3.6.1.4.1.434.2.2.4.16.1.1.5 integer read-only
The speed setting of the driver (line speed), or the dialer (modem speed).
                                   dialerInfoDataEncoding 1.3.6.1.4.1.434.2.2.4.16.1.1.6 dataencoding read-only
The type of data encoding used on the connection.
                                   dialerInfoClockType 1.3.6.1.4.1.434.2.2.4.16.1.1.7 clocktype read-only
The type of clocking used by the modem.
                           dialerDirectInfoTable 1.3.6.1.4.1.434.2.2.4.16.2 no-access
General Information Table for Direct dialer.
                               dialerDirectInfoEntry 1.3.6.1.4.1.434.2.2.4.16.2.1 no-access
The set of dialer configuration attributes for one port.
                                   dialerDirectPortRef 1.3.6.1.4.1.434.2.2.4.16.2.1.1 portref read-only
The id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply.
                                   dialerDirectIfType 1.3.6.1.4.1.434.2.2.4.16.2.1.2 integer read-only
Interface type of the Dialer Enumeration: 'rs232': 1, 'x21': 3, 'v35': 2.
                                   dialerDirectMode 1.3.6.1.4.1.434.2.2.4.16.2.1.3 integer read-only
States whether the modem is connected to a Leased or Dial-Up phone line. Enumeration: 'dial': 2, 'leased': 1.
                                   dialerDirectConnDelay 1.3.6.1.4.1.434.2.2.4.16.2.1.4 integer read-only
Max time for connection in seconds.
                                   dialerDirectRtsDelay 1.3.6.1.4.1.434.2.2.4.16.2.1.5 integer read-only
Delay between arrival of DSR and activation of RTS circuit in msec.
                                   dialerDirectState 1.3.6.1.4.1.434.2.2.4.16.2.1.6 integer read-only
State of the Direct dialer: closed(1) - Modem signals on a dial modem were lost. opening(2) - Link is being set up (modem dialing). asnwering(3) - Accepting call from remote. delaying(4) - Waiting for a timer to expire. opened(5) - Physical link is established. Closing(6) - Disconnecting the physical link. ringing (7) - answer-wait (8) - originating (9) - connecting (10) - connect-delay (11) - connected (12) - disconnecting (13) - remote-disc (14) - local-disc (15) - connect-req (16) - incomming-call (17) - outgoing-call (18) - outgoing-delay (19) - Enumeration: 'originating': 9, 'connect-delay': 11, 'outgoing-call': 18, 'delaying': 4, 'opened': 5, 'opening': 2, 'disconnecting': 13, 'answering': 3, 'incomming-call': 17, 'outgoing-delay': 19, 'connecting': 10, 'closed': 1, 'local-disc': 15, 'connected': 12, 'closing': 6, 'answer-wait': 8, 'remote-disc': 14, 'connect-req': 16, 'ringing': 7.
                           dialerDirectRs232InfoTable 1.3.6.1.4.1.434.2.2.4.16.3 no-access
General Information Table for Direct dialer RS232.
                               dialerDirectRs232InfoEntry 1.3.6.1.4.1.434.2.2.4.16.3.1 no-access
The set of dialer configuration attributes for one port.
                                   dialerDirectRs232PortRef 1.3.6.1.4.1.434.2.2.4.16.3.1.1 portref read-only
The id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply.
                                   dialerDirectRs232DbounceDelay 1.3.6.1.4.1.434.2.2.4.16.3.1.2 integer read-only
This applies to Leased line only. It is the amount of time, expressed in msecs, that DSR signal stays on.
                                   dialerDirectRs232DtrSignal 1.3.6.1.4.1.434.2.2.4.16.3.1.3 onoff read-only
The current status of the DTR signal.
                                   dialerDirectRs232DsrSignal 1.3.6.1.4.1.434.2.2.4.16.3.1.4 onoff read-write
The current status of the DSR signal.
                                   dialerDirectRs232RiSignal 1.3.6.1.4.1.434.2.2.4.16.3.1.5 onoff read-only
The current status of the RI signal. This is set to ON when there is an incoming call.
                           dialerDirectX21InfoTable 1.3.6.1.4.1.434.2.2.4.16.4 no-access
General Information Table for Direct dialer X21.
                               dialerDirectX21InfoEntry 1.3.6.1.4.1.434.2.2.4.16.4.1 no-access
The set of dialer configuration attributes for one port.
                                   dialerDirectX21PortRef 1.3.6.1.4.1.434.2.2.4.16.4.1.1 portref read-only
The id of the port, equal to portIndex from the port group. It identifies the port to which the configuration parameters apply.
                                   dialerDirectX21CtrlSignal 1.3.6.1.4.1.434.2.2.4.16.4.1.2 onoff read-only
The control circuit status.
                                   dialerDirectX21IndicSignal 1.3.6.1.4.1.434.2.2.4.16.4.1.3 onoff read-only
The indication circuit status.
                           dialerV25bisInfoTable 1.3.6.1.4.1.434.2.2.4.16.5 no-access
General Information Table for V25Bis dialer.
                               dialerV25bisInfoEntry 1.3.6.1.4.1.434.2.2.4.16.5.1 no-access
The set of dialer configuration attributes for one port.
                                   dialerV25bisPortRef 1.3.6.1.4.1.434.2.2.4.16.5.1.1 portref read-only
The Port Number.
                                   dialerV25bisPrimaryNum 1.3.6.1.4.1.434.2.2.4.16.5.1.2 displaystring read-write
The main telephone number stored in the dialer.
                                   dialerV25bisSecondaryNum 1.3.6.1.4.1.434.2.2.4.16.5.1.3 displaystring read-write
The alternate telephone number stored in the dialer. This number is dialed if the main number is busy of if there is no answer.
                                   dialerV25bisAnsEnable 1.3.6.1.4.1.434.2.2.4.16.5.1.4 falsetrue read-write
States whether or not the dialer answers incoming calls.
                                   dialerV25bisRetryAllowed 1.3.6.1.4.1.434.2.2.4.16.5.1.5 falsetrue read-only
Indicates whether or not the dialer will try to redial a number that is busy or does not answer.
                                   dialerV25bisMaxRetries 1.3.6.1.4.1.434.2.2.4.16.5.1.6 integer read-only
Specifies how many times a number will be redialed if it is busy or otherwise unresponsive.
                                   dialerV25bisRetryDelay 1.3.6.1.4.1.434.2.2.4.16.5.1.7 integer read-only
The amount of time in msecs between redial attempts.
                                   dialerV25bisConnDelay 1.3.6.1.4.1.434.2.2.4.16.5.1.8 integer read-only
Maximum delay for connection establishment (secs).
                                   dialerV25bisOnOffDelay 1.3.6.1.4.1.434.2.2.4.16.5.1.9 integer read-only
The delay allowed in seconds for the DSR to go off before hangup.
                                   dialerV25bisLossDelay 1.3.6.1.4.1.434.2.2.4.16.5.1.10 integer read-only
Amount of delay in msecs before DSR debouncing for OFF.
                                   dialerV25bisMinDsrOnDelay 1.3.6.1.4.1.434.2.2.4.16.5.1.11 integer read-only
Amount of delay in msecs before DSR debouncing for ON.
                                   dialerV25bisRiDtrDelay 1.3.6.1.4.1.434.2.2.4.16.5.1.12 integer read-only
Amount of delay in msec before raising DTR when RING occurs.
                                   dialerV25bisHangupDelay 1.3.6.1.4.1.434.2.2.4.16.5.1.13 integer read-only
Amount of delay in secs before hangup, if DSR goes OFF in connected state.
                                   dialerV25bisDeltaRiDelay 1.3.6.1.4.1.434.2.2.4.16.5.1.14 integer read-only
Delay in msecs before rings are no longer occur.
                                   dialerV25bisCtsOnDelay 1.3.6.1.4.1.434.2.2.4.16.5.1.15 integer read-only
Maximum delay in msecs for sending a message to the modem.
                                   dialerV25bisDtrSignal 1.3.6.1.4.1.434.2.2.4.16.5.1.16 onoff read-only
DTR status.
                                   dialerV25bisDsrSignal 1.3.6.1.4.1.434.2.2.4.16.5.1.17 onoff read-only
DSR status.
                                   dialerV25bisCtsSignal 1.3.6.1.4.1.434.2.2.4.16.5.1.18 onoff read-only
CTS status.
                                   dialerV25bisRiSignal 1.3.6.1.4.1.434.2.2.4.16.5.1.19 onoff read-only
RI status.
                                   dialerV25bisState 1.3.6.1.4.1.434.2.2.4.16.5.1.20 integer read-only
The status of the V.25bis modem: on-hook (1) - Modem not active ready (2) - Connection established dialing (3) - Dialing a number connect (4) - Successful dial attemp data-tran (5) - Data transfer state enabled retrying (6) - Awaiting call attempt ringing (7) - Incoming call present ans-start (8) - Connect request received ans-cplt (9) - Call establised. hanging-up (10) - Dialer disconnecting from DCE ignore-ring (11) - Ringing signal ignored collision (12) - Collision between connection request and incoming call ans-accepting (13) - Accepted incoming call prog-rdy (14) - Dialer ready to communicate with modem program (15) - Modem ready to communicate with dialer prog-ring (16) - Signal detected from DCE prog-not-rdy (17) - Dialer not ready to communicate with modem. Enumeration: 'prog-not-rdy': 17, 'prog-ring': 16, 'ringing': 7, 'collision': 12, 'prog-rdy': 14, 'ans-start': 8, 'ans-cplt': 9, 'retrying': 6, 'program': 15, 'connect': 4, 'ans-accepting': 13, 'ready': 2, 'ignore-ring': 11, 'hanging-up': 10, 'dialing': 3, 'on-hook': 1, 'data-tran': 5.
                           dialerAtCmdInfoTable 1.3.6.1.4.1.434.2.2.4.16.6 no-access
General Information Table for AT-CMD dialer.
                               dialerAtCmdInfoEntry 1.3.6.1.4.1.434.2.2.4.16.6.1 no-access
The set of dialer configuration attributes for one port.
                                   dialerAtCmdPortRef 1.3.6.1.4.1.434.2.2.4.16.6.1.1 portref read-only
The Port Number.
                                   dialerAtCmdPrimaryNum 1.3.6.1.4.1.434.2.2.4.16.6.1.2 displaystring read-write
The main telephone number stored in the dialer.
                                   dialerAtCmdSecondaryNum 1.3.6.1.4.1.434.2.2.4.16.6.1.3 displaystring read-write
The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer.
                                   dialerAtCmdAnsEnable 1.3.6.1.4.1.434.2.2.4.16.6.1.4 falsetrue read-write
States whether or not the dialer answers incoming calls.
                                   dialerAtCmdRetryAllowed 1.3.6.1.4.1.434.2.2.4.16.6.1.5 falsetrue read-only
Indicates whether or not the dialer will try to redial a number that is busy or does not answer.
                                   dialerAtCmdMaxRetries 1.3.6.1.4.1.434.2.2.4.16.6.1.6 integer read-only
Specifies how many times a number will be redialed if it is busy or otherwise unresponsive.
                                   dialerAtCmdRetryDelay 1.3.6.1.4.1.434.2.2.4.16.6.1.7 integer read-only
The amount of time in msecs between redial attempts.
                                   dialerAtCmdConnDelay 1.3.6.1.4.1.434.2.2.4.16.6.1.8 integer read-only
Maximum delay for connection establishment (secs).
                                   dialerAtCmdOnOffDelay 1.3.6.1.4.1.434.2.2.4.16.6.1.9 integer read-only
The delay allowed in seconds for the DSR signal to go off before hangup.
                                   dialerAtCmdLossDelay 1.3.6.1.4.1.434.2.2.4.16.6.1.10 integer read-only
Number of msecs allowed before DSR debouncing for OFF.
                                   dialerAtCmdMinDsrOnDelay 1.3.6.1.4.1.434.2.2.4.16.6.1.11 integer read-only
msecs DSR debouncing for ON before going OFF.
                                   dialerAtCmdRiDtrDelay 1.3.6.1.4.1.434.2.2.4.16.6.1.12 integer read-only
Amount of delay in msec, before raising DTR when RING occurs.
                                   dialerAtCmdHangupDelay 1.3.6.1.4.1.434.2.2.4.16.6.1.13 integer read-only
Amount of delay in secs before hangup, if DSR goes OFF in connected state.
                                   dialerAtCmdDeltaRiDelay 1.3.6.1.4.1.434.2.2.4.16.6.1.14 integer read-only
delay in msecs before rings no longer occur.
                                   dialerAtCmdParity 1.3.6.1.4.1.434.2.2.4.16.6.1.15 integer read-only
The parity. Enumeration: 'even': 3, 'none': 1, 'odd': 2.
                                   dialerAtCmdBitsPerByte 1.3.6.1.4.1.434.2.2.4.16.6.1.16 integer read-only
The number of data bits per byte. Enumeration: 'data7': 1, 'data8': 2.
                                   dialerAtCmdModemSpeed 1.3.6.1.4.1.434.2.2.4.16.6.1.17 integer read-only
Modem Speed.
                                   dialerAtCmdDtrSignal 1.3.6.1.4.1.434.2.2.4.16.6.1.18 onoff read-only
DTR status.
                                   dialerAtCmdDsrSignal 1.3.6.1.4.1.434.2.2.4.16.6.1.19 onoff read-only
DSR status.
                                   dialerAtCmdRiSignal 1.3.6.1.4.1.434.2.2.4.16.6.1.20 onoff read-only
RI status.
                                   dialerAtCmdState 1.3.6.1.4.1.434.2.2.4.16.6.1.21 integer read-only
The status of the AT modem: on-hook (1) - modem not active dialing (2) - dialing a number answering (3) - accepting call from remote ringing (4) - incoming call present retrying (5) - awaiting new call attempt off-hook (6) - Modem active hanging-up (7) - Disconnecting from DCE Enumeration: 'off-hook': 6, 'answering': 3, 'retrying': 5, 'hanging-up': 7, 'dialing': 2, 'on-hook': 1, 'ringing': 4.
                           dialerV22BisDnaInfoTable 1.3.6.1.4.1.434.2.2.4.16.7 no-access
General Information Table for V22BISDNA dialer.
                               dialerV22BisDnaInfoEntry 1.3.6.1.4.1.434.2.2.4.16.7.1 no-access
The set of dialer configuration attributes for one port.
                                   dialerV22BisDnaPortRef 1.3.6.1.4.1.434.2.2.4.16.7.1.1 portref read-only
The Port Number.
                                   dialerV22BisDnaPrimaryNum 1.3.6.1.4.1.434.2.2.4.16.7.1.2 displaystring read-write
The main telephone number stored in the dialer.
                                   dialerV22BisDnaSecondaryNum 1.3.6.1.4.1.434.2.2.4.16.7.1.3 displaystring read-write
The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer.
                                   dialerV22BisDnaAnsEnable 1.3.6.1.4.1.434.2.2.4.16.7.1.4 falsetrue read-write
States whether or not the dialer answers incoming calls.
                                   dialerV22BisDnaRetryAllowed 1.3.6.1.4.1.434.2.2.4.16.7.1.5 falsetrue read-only
Indicates whether or not the dialer will try to redial a number that is busy or does not answer.
                                   dialerV22BisDnaMaxRetries 1.3.6.1.4.1.434.2.2.4.16.7.1.6 integer read-only
Specifies how many times a number will be redialed if it is busy or otherwise unresponsive.
                                   dialerV22BisDnaCallProgress 1.3.6.1.4.1.434.2.2.4.16.7.1.7 falsetrue read-only
Call progress tone detection.
                                   dialerV22BisDnaDecadic 1.3.6.1.4.1.434.2.2.4.16.7.1.8 falsetrue read-only
Indicates whether Decadic dialing is active or not. Decadic dialing does the following: each digit you dial is subtracted from 10, and the result is the number actually dialed.
                                   dialerV22BisDnaMakeBreakRatio 1.3.6.1.4.1.434.2.2.4.16.7.1.9 integer read-only
Ratio for PULSE and DIAL make and break time.
                                   dialerV22BisDnaRetryDelay 1.3.6.1.4.1.434.2.2.4.16.7.1.10 integer read-only
The amount of time in msecs between redial attempts.
                                   dialerV22BisDnaMinDialDelay 1.3.6.1.4.1.434.2.2.4.16.7.1.11 integer read-only
The length of delay (msec) associated with a comma placed in a dialing command.
                                   dialerV22BisDnaWaitDialTone 1.3.6.1.4.1.434.2.2.4.16.7.1.12 integer read-only
The amount of time (msec) the modem waits when it encounters the wait for dial tone modifier in dial string.
                                   dialerV22BisDnaWaitCarrier 1.3.6.1.4.1.434.2.2.4.16.7.1.13 integer read-only
The amount of time (msec) the modem waits for valid carrier after completing a dial.
                                   dialerV22BisDnaHndshkAbortTimer 1.3.6.1.4.1.434.2.2.4.16.7.1.14 integer read-only
The amount of time (sec) allowed before the call is aborted if DSR does not go ON.
                                   dialerV22BisDnaGuardTone 1.3.6.1.4.1.434.2.2.4.16.7.1.15 integer read-only
Indicates a guard tone frequency.
                                   dialerV22BisDnaPulseDelay 1.3.6.1.4.1.434.2.2.4.16.7.1.16 integer read-only
The delay (msec) between digits dialed on a pulse line.
                                   dialerV22BisDnaDTMFDuration 1.3.6.1.4.1.434.2.2.4.16.7.1.17 integer read-only
The tone duration (msec) used in DMTF dialing.
                                   dialerV22BisDnaDTMFDelay 1.3.6.1.4.1.434.2.2.4.16.7.1.18 integer read-only
The delay (msec) between digits dialed when in tone dial mode.
                                   dialerV22BisDnaDTMFLevel 1.3.6.1.4.1.434.2.2.4.16.7.1.19 integer read-only
The tone dialing level attenuation in dB.
                                   dialerV22BisDnaTxLevel 1.3.6.1.4.1.434.2.2.4.16.7.1.20 integer read-only
The attenuation level (Db) on data transmission, once the handshake is completed with the remote modem.
                                   dialerV22BisDnaRxLevel 1.3.6.1.4.1.434.2.2.4.16.7.1.21 falsetrue read-only
Minimum acceptable receiver threshold value. This indicates whether a 3dB attenuation is used on the receive signal at line input.
                                   dialerV22BisDnaRiNbr 1.3.6.1.4.1.434.2.2.4.16.7.1.22 integer read-only
The number of rings required before the modem answers, if it is set to auto-answer mode.
                                   dialerV22BisDnaDeltaRiDelay 1.3.6.1.4.1.434.2.2.4.16.7.1.23 integer read-only
delay in msecs before rings no longer occur.
                                   dialerV22BisDnaRiDtrDelay 1.3.6.1.4.1.434.2.2.4.16.7.1.24 integer read-only
Amount of delay in msec, before raising DTR when RING occurs.
                                   dialerV22BisDnaDsrRtsDelay 1.3.6.1.4.1.434.2.2.4.16.7.1.25 integer read-only
Delay between arrival of DSR and activation of RTS circuit in msec.
                                   dialerV22BisDnaModemSpeed 1.3.6.1.4.1.434.2.2.4.16.7.1.26 integer read-only
Modem Speed.
                                   dialerV22BisDnaDtrSignal 1.3.6.1.4.1.434.2.2.4.16.7.1.27 onoff read-only
DTR status.
                                   dialerV22BisDnaDsrSignal 1.3.6.1.4.1.434.2.2.4.16.7.1.28 onoff read-only
DSR status.
                                   dialerV22BisDnaRiSignal 1.3.6.1.4.1.434.2.2.4.16.7.1.29 onoff read-only
RI status.
                                   dialerV22BisDnaCdSignal 1.3.6.1.4.1.434.2.2.4.16.7.1.30 onoff read-only
Carrier detect status.
                                   dialerV22BisDnaToneInd 1.3.6.1.4.1.434.2.2.4.16.7.1.31 onoff read-only
Tone indication.
                                   dialerV22BisDnaDloInd 1.3.6.1.4.1.434.2.2.4.16.7.1.32 onoff read-only
Dial line occupied indication.
                                   dialerV22BisDnaState 1.3.6.1.4.1.434.2.2.4.16.7.1.33 integer read-only
Status of the V22bis Dna modem: dialing-phone (1) - Dialing a number on the phone attached to the DNA phone plug. dialing-mdm (2) - Dialing a remote modem retrying (3) - Awaiting call attempt ringing (4) - Incoming call present line-busy (5) - Busy signal encountered off-hook (6) - Modem active on-hook (7) - Modem not active answering (8) - Accepting call from remote delaying (9) - Waiting for timer to expire voice-com (10) - the line is already used by a voice connection. handshaking (11) - Synchronizing calls with remote wait-ringback (12) - Awaiting remote response initialising (13) - initializing modem Enumeration: 'wait-ringback': 12, 'delaying': 9, 'ringing': 4, 'line-busy': 5, 'answering': 8, 'retrying': 3, 'voice-com': 10, 'on-hook': 7, 'initialising': 13, 'dialing-phone': 1, 'handshaking': 11, 'dialing-mdm': 2, 'off-hook': 6.
                           dialerV22BisImcInfoTable 1.3.6.1.4.1.434.2.2.4.16.8 no-access
General Information Table for V22BISIMC dialer.
                               dialerV22BisImcInfoEntry 1.3.6.1.4.1.434.2.2.4.16.8.1 no-access
The set of dialer configuration attributes for one port.
                                   dialerV22BisImcPortRef 1.3.6.1.4.1.434.2.2.4.16.8.1.1 portref read-only
The Port Number.
                                   dialerV22BisImcPrimaryNum 1.3.6.1.4.1.434.2.2.4.16.8.1.2 displaystring read-write
The main telephone number stored in the dialer.
                                   dialerV22BisImcSecondaryNum 1.3.6.1.4.1.434.2.2.4.16.8.1.3 displaystring read-write
The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer.
                                   dialerV22BisImcAnsEnable 1.3.6.1.4.1.434.2.2.4.16.8.1.4 falsetrue read-write
States whether or not the dialer answers incoming calls.
                                   dialerV22BisImcRetryAllowed 1.3.6.1.4.1.434.2.2.4.16.8.1.5 falsetrue read-only
Indicates whether or not the dialer will try to redial a number that is busy or does not answer.
                                   dialerV22BisImcMaxRetries 1.3.6.1.4.1.434.2.2.4.16.8.1.6 integer read-only
Specifies how many times a number will be redialed if it is busy or otherwise unresponsive.
                                   dialerV22BisImcCallProgress 1.3.6.1.4.1.434.2.2.4.16.8.1.7 falsetrue read-only
Call progress tone detection.
                                   dialerV22BisImcDecadic 1.3.6.1.4.1.434.2.2.4.16.8.1.8 falsetrue read-only
Indicates whether Decadic dialing is active or not. Decadic dialing does the following: each digit you dial is subtracted from 10, and the result is the number actually dialed.
                                   dialerV22BisImcMakeBreakRatio 1.3.6.1.4.1.434.2.2.4.16.8.1.9 integer read-only
Ratio of PULSE and DIAL make and break time.
                                   dialerV22BisImcRetryDelay 1.3.6.1.4.1.434.2.2.4.16.8.1.10 integer read-only
The amount of time in msecs between redial attempts.
                                   dialerV22BisImcMinDialDelay 1.3.6.1.4.1.434.2.2.4.16.8.1.11 integer read-only
The length of delay (msec) associated with a comma placed in a dialing command.
                                   dialerV22BisImcWaitDialTone 1.3.6.1.4.1.434.2.2.4.16.8.1.12 integer read-only
The amount of time (msec) the modem waits when it encounters the wait for dial tone modifier in dial string.
                                   dialerV22BisImcWaitCarrier 1.3.6.1.4.1.434.2.2.4.16.8.1.13 integer read-only
The amount of time (msec) the modem waits for valid carrier after completing a dial.
                                   dialerV22BisImcHndshkAbortTimer 1.3.6.1.4.1.434.2.2.4.16.8.1.14 integer read-only
The amount of time (sec) allowed before the call is aborted if DSR does not go ON.
                                   dialerV22BisImcGuardTone 1.3.6.1.4.1.434.2.2.4.16.8.1.15 integer read-only
Indicates a guard tone frequency.
                                   dialerV22BisImcPulseDelay 1.3.6.1.4.1.434.2.2.4.16.8.1.16 integer read-only
The delay between (msec) digits dialed on a pulse line.
                                   dialerV22BisImcDTMFDuration 1.3.6.1.4.1.434.2.2.4.16.8.1.17 integer read-only
The tone (msec) duration used in DMTF dialing.
                                   dialerV22BisImcDTMFDelay 1.3.6.1.4.1.434.2.2.4.16.8.1.18 integer read-only
The delay (msec) between digits dialed when in tone dial mode.
                                   dialerV22BisImcDTMFLevel 1.3.6.1.4.1.434.2.2.4.16.8.1.19 integer read-only
The tone dialing level attenuation in dB.
                                   dialerV22BisImcTxLevel 1.3.6.1.4.1.434.2.2.4.16.8.1.20 integer read-only
The attenuation level (Db) on data transmission, once the handshake is completed with the remote modem.
                                   dialerV22BisImcRxLevel 1.3.6.1.4.1.434.2.2.4.16.8.1.21 integer read-only
Minimum acceptable receiver threshold value. This indicates whether a 3dB attenuation is used on the receive signal at line input.
                                   dialerV22BisImcRiNbr 1.3.6.1.4.1.434.2.2.4.16.8.1.22 integer read-only
The numbet of rings required before the modem answers, if it is set to auto-answer mode.
                                   dialerV22BisImcDeltaRiDelay 1.3.6.1.4.1.434.2.2.4.16.8.1.23 integer read-only
delay in msecs before rings no longer occur.
                                   dialerV22BisImcRiDtrDelay 1.3.6.1.4.1.434.2.2.4.16.8.1.24 integer read-only
Amount of delay in msec, before raising DTR when RING occurs.
                                   dialerV22BisImcDsrRtsDelay 1.3.6.1.4.1.434.2.2.4.16.8.1.25 integer read-only
Delay between arrival of DSR and activation of RTS circuit in msec.
                                   dialerV22BisImcModemSpeed 1.3.6.1.4.1.434.2.2.4.16.8.1.26 integer read-only
Modem Speed.
                                   dialerV22BisImcDtrSignal 1.3.6.1.4.1.434.2.2.4.16.8.1.27 onoff read-only
DTR status.
                                   dialerV22BisImcDsrSignal 1.3.6.1.4.1.434.2.2.4.16.8.1.28 onoff read-only
DSR status.
                                   dialerV22BisImcRiSignal 1.3.6.1.4.1.434.2.2.4.16.8.1.29 onoff read-only
RI status.
                                   dialerV22BisImcCdSignal 1.3.6.1.4.1.434.2.2.4.16.8.1.30 onoff read-only
Carrier Detect status.
                                   dialerV22BisImcToneInd 1.3.6.1.4.1.434.2.2.4.16.8.1.31 onoff read-only
Tone indication.
                                   dialerV22BisImcDloInd 1.3.6.1.4.1.434.2.2.4.16.8.1.32 onoff read-only
Dial line occupied indication.
                                   dialerV22BisImcLineType 1.3.6.1.4.1.434.2.2.4.16.8.1.33 integer read-only
States whether the modem is connected to a Leased or Dial-Up phone line. Enumeration: 'dial': 1, 'leased': 2.
                                   dialerV22BisImcLeasedOpertn 1.3.6.1.4.1.434.2.2.4.16.8.1.34 integer read-only
This applies to Leased line type only. This field states whether the dialer will go off-hook in Originate or Answer mode. Enumeration: 'answer': 1, 'originate': 2.
                                   dialerV22BisImcSpeakerLevel 1.3.6.1.4.1.434.2.2.4.16.8.1.35 integer read-only
The volume level of the Eiconcard's speaker. Enumeration: 'high': 2, 'low': 1.
                                   dialerV22BisImcState 1.3.6.1.4.1.434.2.2.4.16.8.1.36 integer read-only
Status of the V22bis Imc modem: dialing-phone (1) - Dialing a number on the phone attached to the DNA phone plug. dialing-mdm (2) - Dialing a remote modem retrying (3) - Awaiting call attempt ringing (4) - Incoming call present line-busy (5) - Busy signal encountered off-hook (6) - Modem active on-hook (7) - Modem not active answering (8) - Accepting call from remote delaying (9) - Waiting for timer to expire voice-com (10) - the line is already used by a voice connection. handshaking (11) - Syncronizing calls with remote wait-ringback (12) - Awaiting remote response initialising (13) - initializing modem Enumeration: 'wait-ringback': 12, 'delaying': 9, 'ringing': 4, 'line-busy': 5, 'answering': 8, 'retrying': 3, 'voice-com': 10, 'on-hook': 7, 'initialising': 13, 'dialing-phone': 1, 'handshaking': 11, 'dialing-mdm': 2, 'off-hook': 6.
                           dialerV32BisInfoTable 1.3.6.1.4.1.434.2.2.4.16.9 no-access
General Information Table for V32Bis dialer.
                               dialerV32BisInfoEntry 1.3.6.1.4.1.434.2.2.4.16.9.1 no-access
The set of dialer configuration attributes for one port.
                                   dialerV32BisPortRef 1.3.6.1.4.1.434.2.2.4.16.9.1.1 portref read-only
The Port Number.
                                   dialerV32BisPrimNum 1.3.6.1.4.1.434.2.2.4.16.9.1.2 displaystring read-write
The main telephone number stored in the dialer.
                                   dialerV32BisSecNum 1.3.6.1.4.1.434.2.2.4.16.9.1.3 displaystring read-write
The alternate telephone number stored in the dialer. This number is dialed if the main number is busy or if there is no answer.
                                   dialerV32BisOverrNum 1.3.6.1.4.1.434.2.2.4.16.9.1.4 displaystring read-only
Override number.
                                   dialerV32BisCurrNum 1.3.6.1.4.1.434.2.2.4.16.9.1.5 displaystring read-only
Current number.
                                   dialerV32BisPrimBitRate 1.3.6.1.4.1.434.2.2.4.16.9.1.6 primbitrate read-only
Default bit rate for primary number.
                                   dialerV32BisSecBitRate 1.3.6.1.4.1.434.2.2.4.16.9.1.7 primbitrate read-only
Default bit rate for secondary number.
                                   dialerV32BisOverrBitRate 1.3.6.1.4.1.434.2.2.4.16.9.1.8 primbitrate read-only
Default bit rate for override number.
                                   dialerV32BisCurrBitRate 1.3.6.1.4.1.434.2.2.4.16.9.1.9 primbitrate read-only
Default bit rate for current number.
                                   dialerV32BisPrimConfig 1.3.6.1.4.1.434.2.2.4.16.9.1.10 primcfg read-only
Dial modem primary configuration
                                   dialerV32BisSecConfig 1.3.6.1.4.1.434.2.2.4.16.9.1.11 primcfg read-only
Dial modem secondary configuration
                                   dialerV32BisOverrConfig 1.3.6.1.4.1.434.2.2.4.16.9.1.12 primcfg read-only
Dial modem override configuration
                                   dialerV32BisCurrConfig 1.3.6.1.4.1.434.2.2.4.16.9.1.13 primcfg read-only
Dial modem current configuration
                                   dialerV32BisCurrRetry 1.3.6.1.4.1.434.2.2.4.16.9.1.14 integer read-only
Current number of retries.
                                   dialerV32BisRingCount 1.3.6.1.4.1.434.2.2.4.16.9.1.15 integer read-only
Incoming ring counter.
                                   dialerV32BisAnsEnable 1.3.6.1.4.1.434.2.2.4.16.9.1.16 falsetrue read-write
States whether or not the dialer answers incoming calls.
                                   dialerV32BisDialMethod 1.3.6.1.4.1.434.2.2.4.16.9.1.17 integer read-only
The method used for dialing. Enumeration: 'dtmf': 1, 'pulse': 2.
                                   dialerV32BisRetry 1.3.6.1.4.1.434.2.2.4.16.9.1.18 falsetrue read-only
Indicates whether or not the dialer will try to redial a number that is busy or does not answer.
                                   dialerV32BisCallFailure 1.3.6.1.4.1.434.2.2.4.16.9.1.19 integer read-only
Reason for last call failure.
                                   dialerV32BisCarrierDetect 1.3.6.1.4.1.434.2.2.4.16.9.1.20 integer read-only
Delay in msec to wait for verification of carrier detect.
                                   dialerV32BisCarrierWait 1.3.6.1.4.1.434.2.2.4.16.9.1.21 integer read-only
Delay in msec to wait for carrier detect.
                                   dialerV32BisHangupVerify 1.3.6.1.4.1.434.2.2.4.16.9.1.22 integer read-only
Delay in msec to wait to verify for hangup.
                                   dialerV32BisHangupSignal 1.3.6.1.4.1.434.2.2.4.16.9.1.23 disenable read-only
Hangup signal state.
                                   dialerV32BisTxLevel 1.3.6.1.4.1.434.2.2.4.16.9.1.24 integer read-only
The attenuation level (Db) on data transmission, once the handshake is completed with the remote modem.
                                   dialerV32BisRxLevel 1.3.6.1.4.1.434.2.2.4.16.9.1.25 integer read-only
Minimum acceptable receiver threshold value. This indicates whether a 3dB attenuation is used on the receive signal at line input.
                                   dialerV32BisGuardTone 1.3.6.1.4.1.434.2.2.4.16.9.1.26 integer read-only
Indicates a guard tone frequency.
                                   dialerV32BisLeasedLine 1.3.6.1.4.1.434.2.2.4.16.9.1.27 integer read-only
Dial or leased line. Enumeration: 'four-w-ll': 2, 'two-w-ll': 1.
                                   dialerV32BisLeaseMode 1.3.6.1.4.1.434.2.2.4.16.9.1.28 integer read-only
This applies to Leased line type only. This field states whether the dialer will go off-hook in Originate or Answer mode. Enumeration: 'answer': 1, 'originate': 2.
                                   dialerV32BisLLTxLevel 1.3.6.1.4.1.434.2.2.4.16.9.1.29 integer read-only
The attenuation level (Db) on data transmission once the handshake is completed with the remote modem (for leased line).
                                   dialerV32BisLLConfig 1.3.6.1.4.1.434.2.2.4.16.9.1.30 primcfg read-only
Leased line configuration
                                   dialerV32BisLLBitRate 1.3.6.1.4.1.434.2.2.4.16.9.1.31 primbitrate read-only
Leased line bit rate.
                                   dialerV32BisCallingTone 1.3.6.1.4.1.434.2.2.4.16.9.1.32 disenable read-only
Calling tone state.
                                   dialerV32BisAutoMode 1.3.6.1.4.1.434.2.2.4.16.9.1.33 disenable read-only
Auto mode state (fallback/forward).
                                   dialerV32BisRetryAllowed 1.3.6.1.4.1.434.2.2.4.16.9.1.34 disenable read-only
Indicates whether or not the dialer will try to redial a number that is busy or does not answer.
                                   dialerV32BisMaxRetry 1.3.6.1.4.1.434.2.2.4.16.9.1.35 integer read-only
Specifies how many times a number will be redialed if it is busy or otherwise unresponsive.
                                   dialerV32BisDialTone 1.3.6.1.4.1.434.2.2.4.16.9.1.36 disenable read-only
The dial tone state.
                                   dialerV32BisDialToneWait 1.3.6.1.4.1.434.2.2.4.16.9.1.37 integer read-only
The amount of time (msec) the modem waits when it encounters the wait for dial tone modifier in dial string.
                                   dialerV32BisRetryWait 1.3.6.1.4.1.434.2.2.4.16.9.1.38 integer read-only
Retry timer delay.
                                   dialerV32BisHangupWait 1.3.6.1.4.1.434.2.2.4.16.9.1.39 integer read-only
Hangup timer delay.
                                   dialerV32BisDialPauseWait 1.3.6.1.4.1.434.2.2.4.16.9.1.40 integer read-only
maximum delay before dial.
                                   dialerV32BisDeltaRiWait 1.3.6.1.4.1.434.2.2.4.16.9.1.41 integer read-only
Maximum delay (msec) between 2 rings.
                                   dialerV32BisDTMFDuration 1.3.6.1.4.1.434.2.2.4.16.9.1.42 integer read-only
The tone duration (msec) used in DMTF dialing.
                                   dialerV32BisDTMFDelay 1.3.6.1.4.1.434.2.2.4.16.9.1.43 integer read-only
The delay (msec) between digits dialed when in tone dial mode.
                                   dialerV32BisDTMFFreq1Level 1.3.6.1.4.1.434.2.2.4.16.9.1.44 integer read-only
DTMF high frequency power level.
                                   dialerV32BisDTMFFreq2Level 1.3.6.1.4.1.434.2.2.4.16.9.1.45 integer read-only
DTMF low frequency power level.
                                   dialerV32BisPulseMakeTime 1.3.6.1.4.1.434.2.2.4.16.9.1.46 integer read-only
Pulse make time (msec).
                                   dialerV32BisPulseBreakTime 1.3.6.1.4.1.434.2.2.4.16.9.1.47 integer read-only
Pulse break time (msec).
                                   dialerV32BisPulseDelay 1.3.6.1.4.1.434.2.2.4.16.9.1.48 integer read-only
Pulse interdigit delay (msec).
                                   dialerV32BisSpeakerLevel 1.3.6.1.4.1.434.2.2.4.16.9.1.49 integer read-only
The volume level of the Eiconcard's speaker. Enumeration: 'high': 2, 'low': 1.
                                   dialerV32BisRiToAnswer 1.3.6.1.4.1.434.2.2.4.16.9.1.50 integer read-only
Number of rings befor answering.
                                   dialerV32BisAnswerBitRate 1.3.6.1.4.1.434.2.2.4.16.9.1.51 primbitrate read-only
Answer bit rate.
                                   dialerV32BisAnswerConfig 1.3.6.1.4.1.434.2.2.4.16.9.1.52 primcfg read-only
Answer configuration.
                                   dialerV32BisRetrain 1.3.6.1.4.1.434.2.2.4.16.9.1.53 onoff read-only
.
                                   dialerV32BisEqmLevel 1.3.6.1.4.1.434.2.2.4.16.9.1.54 integer read-only
. Enumeration: 'low-quality': 2, 'disable': 1, 'high-quality': 4, 'medium-quality': 3.
                                   dialerV32BisRiOnOffDetect 1.3.6.1.4.1.434.2.2.4.16.9.1.55 onoff read-only
Ring signal status.
                                   dialerV32BisCdDetect 1.3.6.1.4.1.434.2.2.4.16.9.1.56 onoff read-only
Carrier detect status.
                                   dialerV32BisRingbackDetect 1.3.6.1.4.1.434.2.2.4.16.9.1.57 onoff read-only
Ringback signal detect status.
                                   dialerV32BisAnswerDetect 1.3.6.1.4.1.434.2.2.4.16.9.1.58 onoff read-only
Answer tone detect status.
                                   dialerV32BisBusyDetect 1.3.6.1.4.1.434.2.2.4.16.9.1.59 onoff read-only
Busy tone detect status.
                                   dialerV32BisDiscDetect 1.3.6.1.4.1.434.2.2.4.16.9.1.60 onoff read-only
Disconnect detect status.
                                   dialerV32BisCdSignal 1.3.6.1.4.1.434.2.2.4.16.9.1.61 onoff read-only
CD signal status.
                                   dialerV32BisDsrSignal 1.3.6.1.4.1.434.2.2.4.16.9.1.62 onoff read-only
DSR signal status.
                                   dialerV32BisState 1.3.6.1.4.1.434.2.2.4.16.9.1.63 integer read-only
State of the V32bis dialer: m-closed (1) - Dialer not active m-opened (2) - No connection establised m-local-test (3) - Local analog loopback m-ringing (4) - Incoming call present m-dialing (5) - Dialing a number m-answering (6) - Call answer in progress m-originating (7) - Call originate in progress m-retrying (8) - Awaiting call attempt m-connected (9) - connection present m-retraining (10) - performing retrain m-remote-test (11) - Remote digital loopback m-remote-disc (12) - Remote has disconnected m-local-disc (13) - Local has disconnected m-hangup-idle (14) - Idle after hangup m-closing (15) - Awaiting local disconnect m-offhook-idle (16) - Modem goes off hook on command Enumeration: 'm-dialing': 5, 'm-retraining': 10, 'm-ringing': 4, 'm-retrying': 8, 'm-remote-disc': 12, 'm-remote-test': 11, 'm-hangup-idle': 14, 'm-local-disc': 13, 'm-connected': 9, 'm-closing': 15, 'm-closed': 1, 'm-local-test': 3, 'm-answering': 6, 'm-originating': 7, 'm-opened': 2, 'm-offhook-idle': 16.
                           dialerControlTable 1.3.6.1.4.1.434.2.2.4.16.10 no-access
The table for dynamic dialing entries.
                                 dialerControlEntry 1.3.6.1.4.1.434.2.2.4.16.10.1 no-access
The set of attributes for one entry per port.
                                     dialerCtrlPortRef 1.3.6.1.4.1.434.2.2.4.16.10.1.1 portref read-only
The Port number of the dialer.
                                     dialerCtrlAction 1.3.6.1.4.1.434.2.2.4.16.10.1.2 integer read-write
The Action states. exec (1) - This action executes the script file which would be set in dialerCtrlScriptFile. dial (2) - This action dials the number stored in dialerCtrlMainNumber. if dialerCtrlMainNumber is not set then the dialerCtrlPrimary number is dialed by the dialer. ISDN dialer dials the number stored by the card. hangup (3) - This action hangs-up the current connection. store (6) - This action stores the parameters in the card. ISDN dialer only. Enumeration: 'dial': 2, 'start': 4, 'exec': 1, 'hangup': 3, 'idle': 5, 'other': 7, 'store': 6.
                                     dialerCtrlAnsEnable 1.3.6.1.4.1.434.2.2.4.16.10.1.3 falsetrue read-write
States whether or not the dialer answers incoming calls.
                                     dialerCtrlDirectDSROnOff 1.3.6.1.4.1.434.2.2.4.16.10.1.4 onoff read-write
Defines the setting of the Data Rate Select signal. Setting this mib is valid only if the dialer type is Direct and the interface is RS-232.
                                     dialerCtrlNumber 1.3.6.1.4.1.434.2.2.4.16.10.1.5 displaystring read-write
The primary Phone Number
                                     dialerCtrlScriptFile 1.3.6.1.4.1.434.2.2.4.16.10.1.6 displaystring read-write
The Complete path where the Dialer Script file resides.
                                     dialerCtrlActionState 1.3.6.1.4.1.434.2.2.4.16.10.1.7 actionstate read-only
The state of the action operation performed by the Agent as a result of setting the values to the dialerCtrlAction. The Management station will poll that variable after initiating an action. The value done(1) indicates that the action terminated successfully. The value failed(2) indicates that the action terminated with an error. The variable dialerCtrlActionError indicates the error code.
                                     dialerCtrlActionError 1.3.6.1.4.1.434.2.2.4.16.10.1.8 integer read-only
If the value is 0, this means no error. Otherwise, the value indicates the error code returned after the action operation.
                                     dialerCtrlConfig 1.3.6.1.4.1.434.2.2.4.16.10.1.9 primcfg read-write
The config to which the V32 dialer will have to be set. This information is only used when using a V32 dialer.
                                     dialerCtrlBitRate 1.3.6.1.4.1.434.2.2.4.16.10.1.10 primbitrate read-write
The Bit Rate to which the V32 dialer will have to be set. This information is only used when using a V32 dialer.
                                     dialerCtrlType 1.3.6.1.4.1.434.2.2.4.16.10.1.11 isdndntype read-write
The remote directory number type. Used by ISDN dialer only. DEFINED ONLY FOR TESTS.
                                     dialerCtrlPlan 1.3.6.1.4.1.434.2.2.4.16.10.1.12 isdndnplan read-write
The remote directory number plan. Used by ISDN dialer only. DEFINED ONLY FOR TESTS.
                                     dialerCtrlSub 1.3.6.1.4.1.434.2.2.4.16.10.1.13 displaystring read-write
The remote subaddress. When in the connected state, the remote subaddress dialer is displayed. Otherwise, the stored subaddress is displayed. Used by ISDN dialer only. DEFINED ONLY FOR TESTS.
                                     dialerCtrlSubType 1.3.6.1.4.1.434.2.2.4.16.10.1.14 isdnsubtype read-write
The local subaddress type. Used by ISDN dialer only. DEFINED ONLY FOR TESTS.
                                     dialerCtrlTns 1.3.6.1.4.1.434.2.2.4.16.10.1.15 displaystring read-write
The string identifying the selected long distance carrier. In ISDN terms, it is called the Transit Network Selection. This string is usually made of 3 digits and is assigned by Bellcore. Used by ISDN dialer only. DEFINED ONLY FOR TESTS.
                                     dialerCtrlNumberTemp 1.3.6.1.4.1.434.2.2.4.16.10.1.16 displaystring read-only
The temporary Phone Number. DEFINED ONLY FOR ISDN TESTS.
                                     dialerCtrlDialMask 1.3.6.1.4.1.434.2.2.4.16.10.1.17 integer read-only
Read the mask state. DEFINED ONLY FOR TESTS.
                                     dialerCtrlCallSpeed 1.3.6.1.4.1.434.2.2.4.16.10.1.18 integer read-only
Read the mask state. DEFINED ONLY FOR TESTS.
                           dialerIsdnStatusTable 1.3.6.1.4.1.434.2.2.4.16.11 no-access
The table for ISDN dialer Status.
                                 dialerIsdnStatusEntry 1.3.6.1.4.1.434.2.2.4.16.11.1 no-access
The set of attributes for one port.
                                     dialerIsdnStatusPortRef 1.3.6.1.4.1.434.2.2.4.16.11.1.1 portref read-only
The port number for which isdn status is displayed.
                                     dialerIsdnStatusSwitchType 1.3.6.1.4.1.434.2.2.4.16.11.1.2 integer read-only
The current switch type in use for isdn. Enumeration: 'nt': 2, 'tph': 7, 'att': 3, 'vn3': 5, 'illegal': 8, 'ni1': 1, 'net3': 6, 'tr6': 4.
                                     dialerIsdnStatusChType 1.3.6.1.4.1.434.2.2.4.16.11.1.3 integer read-only
The isdn channel type, B channel or D channel. Enumeration: 'unused': 4, 'b-channel': 1, 'illegal': 3, 'd-channel': 2.
                                     dialerIsdnStatusL1State 1.3.6.1.4.1.434.2.2.4.16.11.1.4 integer read-only
The current state of layer 1 subsystem. Enumeration: 'deactivated': 1, 'await-info4': 3, 'activate': 4, 'await-info2': 2, 'illegal': 5.
                                     dialerIsdnStatusState 1.3.6.1.4.1.434.2.2.4.16.11.1.5 integer read-only
The current state of the ISDN dialer. Enumeration: 'isdn-disconnecting': 12, 'isdn-linking-deact': 15, 'isdn-test': 17, 'isdn-linking-ring': 18, 'isdn-closed': 7, 'isdn-deact-opened': 2, 'isdn-wait-act-opened': 4, 'isdn-closing': 13, 'isdn-loopback': 14, 'isdn-deact-closed': 1, 'isdn-ringing': 11, 'isdn-wait-act-closed': 3, 'isdn-connected': 10, 'isdn-release-opened': 6, 'isdn-release-closed': 5, 'isdn-connecting': 9, 'isdn-illegal': 19, 'isdn-linking-act': 16, 'isdn-opened': 8.
                           dialerIsdnNI1BChTable 1.3.6.1.4.1.434.2.2.4.16.12 no-access
The table for the ISDN NI1 BChannel dialer.
                                 dialerIsdnNI1BChEntry 1.3.6.1.4.1.434.2.2.4.16.12.1 no-access
The set of attributes for one port.
                                     dialerIsdnNI1BChPortRef 1.3.6.1.4.1.434.2.2.4.16.12.1.1 portref read-only
The port number which is configured for NI1-BChannel.
                                     dialerIsdnNI1BChSpid 1.3.6.1.4.1.434.2.2.4.16.12.1.2 displaystring read-only
The Terminal's Service Profile IDentification.
                                     dialerIsdnNI1BChSpidStatus 1.3.6.1.4.1.434.2.2.4.16.12.1.3 isdnspidstatus read-only
The current SPID status.
                                     dialerIsdnNI1BChLocalDn 1.3.6.1.4.1.434.2.2.4.16.12.1.4 displaystring read-only
The local directory number type.
                                     dialerIsdnNI1BChLocalSub 1.3.6.1.4.1.434.2.2.4.16.12.1.5 displaystring read-only
The local subaddress.
                                     dialerIsdnNI1BChTnsDigs 1.3.6.1.4.1.434.2.2.4.16.12.1.6 displaystring read-write
The string identifying the selected long distance carrier. In ISDN terms, it is called the Transit Network Selection. This string is usually made of 3 digits and is assigned by Bellcore.
                                     dialerIsdnNI1BChRemoteDn 1.3.6.1.4.1.434.2.2.4.16.12.1.7 displaystring read-write
When in the connected state, the number dialed is displayed. Otherwise, the stored number is displayed.
                                     dialerIsdnNI1BChRemoteSub 1.3.6.1.4.1.434.2.2.4.16.12.1.8 displaystring read-write
When in the connected state, the remote subaddress dialer is displayed. Otherwise, the stored subaddress is displayed.
                                     dialerIsdnNI1BChCallType 1.3.6.1.4.1.434.2.2.4.16.12.1.9 isdncalltype read-only
The current call type.
                                     dialerIsdnNI1BChCallSpeed 1.3.6.1.4.1.434.2.2.4.16.12.1.10 isdncallspeed read-write
The current call speed.
                                     dialerIsdnNI1BChBChannel 1.3.6.1.4.1.434.2.2.4.16.12.1.11 isdnbchannels read-only
The current B channel connected to.
                                     dialerIsdnNI1BChAnsEnable 1.3.6.1.4.1.434.2.2.4.16.12.1.12 isdnansenable read-only
Answer Enable Status.
                                     dialerIsdnNI1BChCcState 1.3.6.1.4.1.434.2.2.4.16.12.1.13 isdnni1bccstate read-only
The state of call control subsystem.
                                     dialerIsdnNI1BChCcNbCause 1.3.6.1.4.1.434.2.2.4.16.12.1.14 integer read-only
The number of causes saved.
                                     dialerIsdnNI1BChCcCause 1.3.6.1.4.1.434.2.2.4.16.12.1.15 octet string read-only
Last causes saved.
                                     dialerIsdnNI1BChL3State 1.3.6.1.4.1.434.2.2.4.16.12.1.16 isdnl3state read-only
The state of layer 3 subsystem.
                                     dialerIsdnNI1BChL2State 1.3.6.1.4.1.434.2.2.4.16.12.1.17 isdnl2state read-only
The state of layer 2 subsystem.
                                     dialerIsdnNI1BChTeiValue 1.3.6.1.4.1.434.2.2.4.16.12.1.18 integer read-only
The value of the terminal is dynamic TEI.
                                     dialerIsdnNI1BChTeiStatus 1.3.6.1.4.1.434.2.2.4.16.12.1.19 isdnteistatus read-only
The status of the terminal's dynamic TEI.
                                     dialerIsdnNI1BChLocalDnType 1.3.6.1.4.1.434.2.2.4.16.12.1.20 isdndntype read-only
The local directory number type.
                                     dialerIsdnNI1BChLocalDnPlan 1.3.6.1.4.1.434.2.2.4.16.12.1.21 isdndnplan read-only
The local directory number plan.
                                     dialerIsdnNI1BChLocalSubType 1.3.6.1.4.1.434.2.2.4.16.12.1.22 isdnsubtype read-only
The local subaddress type.
                                     dialerIsdnNI1BChTnsNetId 1.3.6.1.4.1.434.2.2.4.16.12.1.23 isdntnsnetid read-only
The transit network id.
                                     dialerIsdnNI1BChTnsIdPlan 1.3.6.1.4.1.434.2.2.4.16.12.1.24 isdntnsidplan read-only
The transit network plan.
                                     dialerIsdnNI1BChRemoteDnType 1.3.6.1.4.1.434.2.2.4.16.12.1.25 isdndntype read-write
The remote directory number type.
                                     dialerIsdnNI1BChRemoteDnPlan 1.3.6.1.4.1.434.2.2.4.16.12.1.26 isdndnplan read-write
The remote directory number plan.
                                     dialerIsdnNI1BChRemoteSubType 1.3.6.1.4.1.434.2.2.4.16.12.1.27 isdnsubtype read-write
The local subaddress type.
                                     dialerIsdnNI1BChScrStatus 1.3.6.1.4.1.434.2.2.4.16.12.1.28 isdnscrstatus read-only
The status of call screening.
                                     dialerIsdnNI1BChCallOpt 1.3.6.1.4.1.434.2.2.4.16.12.1.29 isdncallopt read-only
The current call option.
                                     dialerIsdnNI1BChStoDefined 1.3.6.1.4.1.434.2.2.4.16.12.1.30 isdnstodefined read-only
The validity of sto- elements.
                                     dialerIsdnNI1BChStoDnType 1.3.6.1.4.1.434.2.2.4.16.12.1.31 integer read-only
The stored directory number type.
                                     dialerIsdnNI1BChStoDnPlan 1.3.6.1.4.1.434.2.2.4.16.12.1.32 integer read-only
The stored directory number plan.
                                     dialerIsdnNI1BChStoDn 1.3.6.1.4.1.434.2.2.4.16.12.1.33 displaystring read-only
The stored directory number.
                                     dialerIsdnNI1BChStoSubType 1.3.6.1.4.1.434.2.2.4.16.12.1.34 integer read-only
The stored subaddress type.
                                     dialerIsdnNI1BChStoSub 1.3.6.1.4.1.434.2.2.4.16.12.1.35 displaystring read-only
The stored subaddress.
                                     dialerIsdnNI1BChStoTnsNetId 1.3.6.1.4.1.434.2.2.4.16.12.1.36 integer read-only
The stored transit network id.
                                     dialerIsdnNI1BChStoTnsPlan 1.3.6.1.4.1.434.2.2.4.16.12.1.37 integer read-only
The stored transit network plan.
                                     dialerIsdnNI1BChStoDigs 1.3.6.1.4.1.434.2.2.4.16.12.1.38 displaystring read-only
The stored transit network address.
                                     dialerIsdnNI1BChStoBcType 1.3.6.1.4.1.434.2.2.4.16.12.1.39 integer read-only
The stored bearer cap. type.
                                     dialerIsdnNI1BChStoBcOpt 1.3.6.1.4.1.434.2.2.4.16.12.1.40 integer read-only
The stored bearer cap. option.
                           dialerIsdnNI1DChTable 1.3.6.1.4.1.434.2.2.4.16.13 no-access
The table for the ISDN NI1 DChannel dialer.
                                 dialerIsdnNI1DChEntry 1.3.6.1.4.1.434.2.2.4.16.13.1 no-access
The set of attributes for one port.
                                     dialerIsdnNI1DChPortRef 1.3.6.1.4.1.434.2.2.4.16.13.1.1 portref read-only
The port number configured for the NI1 DChannel.
                                     dialerIsdnNI1DChTeiValue 1.3.6.1.4.1.434.2.2.4.16.13.1.2 integer read-only
The static TEI value on the D Channel for data communications.
                                     dialerIsdnNI1DChTeiStatus 1.3.6.1.4.1.434.2.2.4.16.13.1.3 isdnteistatus read-only
The status of TEI - always ASSIGNED.
                                     dialerIsdnNI1DChL2State 1.3.6.1.4.1.434.2.2.4.16.13.1.4 isdnl2state read-only
The current layer 2 state.
                                     dialerIsdnNI1DChP3State 1.3.6.1.4.1.434.2.2.4.16.13.1.5 isdnp3state read-only
The current Packet layer state.
                                     dialerIsdnNI1DChActState 1.3.6.1.4.1.434.2.2.4.16.13.1.6 isdnactstate read-only
The current activation FSM state.
                           dialerIsdnTR6BChTable 1.3.6.1.4.1.434.2.2.4.16.14 no-access
The table for the ISDN TR6 BChannel dialer.
                                 dialerIsdnTR6BChEntry 1.3.6.1.4.1.434.2.2.4.16.14.1 no-access
The set of attributes for one port.
                                     dialerIsdnTR6BChPortRef 1.3.6.1.4.1.434.2.2.4.16.14.1.1 portref read-only
The port number for which the 1TR6 BChannel info is displayed.
                                     dialerIsdnTR6BChLocalDn 1.3.6.1.4.1.434.2.2.4.16.14.1.2 displaystring read-only
The local directory number type.
                                     dialerIsdnTR6BChRemoteDn 1.3.6.1.4.1.434.2.2.4.16.14.1.3 displaystring read-write
When in the connected state, the number dialed is displayed. Otherwise, the stored number is displayed.
                                     dialerIsdnTR6BChCallType 1.3.6.1.4.1.434.2.2.4.16.14.1.4 isdncalltype read-only
The current call type.
                                     dialerIsdnTR6BChCallSpeed 1.3.6.1.4.1.434.2.2.4.16.14.1.5 isdncallspeed read-write
The current call speed.
                                     dialerIsdnTR6BChBChannel 1.3.6.1.4.1.434.2.2.4.16.14.1.6 isdnbchannels read-only
The current B Channel connected to.
                                     dialerIsdnTR6BChAnsEnable 1.3.6.1.4.1.434.2.2.4.16.14.1.7 isdnansenable read-only
Answer enable status.
                                     dialerIsdnTR6BChCcState 1.3.6.1.4.1.434.2.2.4.16.14.1.8 isdntr6bccstate read-only
The state of call control subsystem.
                                     dialerIsdnTR6BChCcNbCause 1.3.6.1.4.1.434.2.2.4.16.14.1.9 integer read-only
The number of causes saved.
                                     dialerIsdnTR6BChCcCause 1.3.6.1.4.1.434.2.2.4.16.14.1.10 octet string read-only
Last causes saved.
                                     dialerIsdnTR6BChL3State 1.3.6.1.4.1.434.2.2.4.16.14.1.11 isdnl3state read-only
The state of layer 3 subsystem.
                                     dialerIsdnTR6BChL2State 1.3.6.1.4.1.434.2.2.4.16.14.1.12 isdnl2state read-only
The state of layer 2 subsystem.
                                     dialerIsdnTR6BChLocalDnType 1.3.6.1.4.1.434.2.2.4.16.14.1.13 isdndntype read-only
The local directory number type.
                                     dialerIsdnTR6BChLocalDnPlan 1.3.6.1.4.1.434.2.2.4.16.14.1.14 isdndnplan read-only
The local directory number plan.
                                     dialerIsdnTR6BChRemoteDnType 1.3.6.1.4.1.434.2.2.4.16.14.1.15 isdndntype read-write
The remote directory number type.
                                     dialerIsdnTR6BChRemoteDnPlan 1.3.6.1.4.1.434.2.2.4.16.14.1.16 isdndnplan read-write
The remote directory number plan.
                                     dialerIsdnTR6BChScrStatus 1.3.6.1.4.1.434.2.2.4.16.14.1.17 isdnscrstatus read-only
The status of call screening.
                                     dialerIsdnTR6BChCallOpt 1.3.6.1.4.1.434.2.2.4.16.14.1.18 isdncallopt read-only
The current call option.
                                     dialerIsdnTR6BChTeiValue 1.3.6.1.4.1.434.2.2.4.16.14.1.19 integer read-only
The static TEI value on the D Channel for data communications.
                                     dialerIsdnTR6BChTeiStatus 1.3.6.1.4.1.434.2.2.4.16.14.1.20 isdnteistatus read-only
The status of TEI - always ASSIGNED.
                                     dialerIsdnTR6BChStoDefined 1.3.6.1.4.1.434.2.2.4.16.14.1.21 isdnstodefined read-only
The validity of sto- elements.
                                     dialerIsdnTR6BChStoDnType 1.3.6.1.4.1.434.2.2.4.16.14.1.22 integer read-only
The stored directory number type.
                                     dialerIsdnTR6BChStoDnPlan 1.3.6.1.4.1.434.2.2.4.16.14.1.23 integer read-only
The stored directory number plan.
                                     dialerIsdnTR6BChStoDn 1.3.6.1.4.1.434.2.2.4.16.14.1.24 displaystring read-only
The stored directory number.
                                     dialerIsdnTR6BChStoBcType 1.3.6.1.4.1.434.2.2.4.16.14.1.25 integer read-only
The stored bearer cap. type.
                                     dialerIsdnTR6BChStoBcOpt 1.3.6.1.4.1.434.2.2.4.16.14.1.26 integer read-only
The stored bearer cap. option.
                           dialerIsdnVN3BChTable 1.3.6.1.4.1.434.2.2.4.16.15 no-access
The table for the ISDN VN3 BChannel dialer.
                                 dialerIsdnVN3BChEntry 1.3.6.1.4.1.434.2.2.4.16.15.1 no-access
The set of attributes for one port.
                                     dialerIsdnVN3BChPortRef 1.3.6.1.4.1.434.2.2.4.16.15.1.1 portref read-only
The port number for which the VN3 BChannel info is displayed.
                                     dialerIsdnVN3BChLocalDnType 1.3.6.1.4.1.434.2.2.4.16.15.1.2 isdndntype read-only
The local directory number type.
                                     dialerIsdnVN3BChLocalDnPlan 1.3.6.1.4.1.434.2.2.4.16.15.1.3 isdndnplan read-only
The local directory number plan.
                                     dialerIsdnVN3BChLocalDn 1.3.6.1.4.1.434.2.2.4.16.15.1.4 displaystring read-only
The local directory number type.
                                     dialerIsdnVN3BChLocalSubType 1.3.6.1.4.1.434.2.2.4.16.15.1.5 isdnsubtype read-only
The local subaddress type.
                                     dialerIsdnVN3BChLocalSub 1.3.6.1.4.1.434.2.2.4.16.15.1.6 displaystring read-only
The local directory number type.
                                     dialerIsdnVN3BChRemoteDnType 1.3.6.1.4.1.434.2.2.4.16.15.1.7 isdndntype read-write
The local directory number type.
                                     dialerIsdnVN3BChRemoteDnPlan 1.3.6.1.4.1.434.2.2.4.16.15.1.8 isdndnplan read-write
The local directory number plan.
                                     dialerIsdnVN3BChRemoteDn 1.3.6.1.4.1.434.2.2.4.16.15.1.9 displaystring read-write
The local directory number type.
                                     dialerIsdnVN3BChRemoteSubType 1.3.6.1.4.1.434.2.2.4.16.15.1.10 isdnsubtype read-write
The local subaddress type.
                                     dialerIsdnVN3BChRemoteSub 1.3.6.1.4.1.434.2.2.4.16.15.1.11 displaystring read-write
The local directory number type.
                                     dialerIsdnVN3BChCallType 1.3.6.1.4.1.434.2.2.4.16.15.1.12 isdncalltype read-only
The current call type.
                                     dialerIsdnVN3BChCallSpeed 1.3.6.1.4.1.434.2.2.4.16.15.1.13 isdncallspeed read-write
The current call speed.
                                     dialerIsdnVN3BChBChannel 1.3.6.1.4.1.434.2.2.4.16.15.1.14 isdnbchannels read-only
The current B Channel connected to.
                                     dialerIsdnVN3BChAnsEnable 1.3.6.1.4.1.434.2.2.4.16.15.1.15 isdnansenable read-only
Answer enable status.
                                     dialerIsdnVN3BChScrStatus 1.3.6.1.4.1.434.2.2.4.16.15.1.16 isdnscrstatus read-only
The status of call screening.
                                     dialerIsdnVN3BChCallOpt 1.3.6.1.4.1.434.2.2.4.16.15.1.17 isdncallopt read-only
The current call option.
                                     dialerIsdnVN3BChCcState 1.3.6.1.4.1.434.2.2.4.16.15.1.18 isdnvn3bccstate read-only
The state of call control subsystem.
                                     dialerIsdnVN3BChCcNbCause 1.3.6.1.4.1.434.2.2.4.16.15.1.19 integer read-only
The number of causes saved.
                                     dialerIsdnVN3BChCcCause 1.3.6.1.4.1.434.2.2.4.16.15.1.20 octet string read-only
Last causes saved.
                                     dialerIsdnVN3BChL3State 1.3.6.1.4.1.434.2.2.4.16.15.1.21 isdnl3state read-only
The state of layer 3 subsystem.
                                     dialerIsdnVN3BChL2State 1.3.6.1.4.1.434.2.2.4.16.15.1.22 isdnl2state read-only
The state of layer 2 subsystem.
                                     dialerIsdnVN3BChTeiValue 1.3.6.1.4.1.434.2.2.4.16.15.1.23 integer read-only
The static TEI value on the D Channel for data communications.
                                     dialerIsdnVN3BChTeiStatus 1.3.6.1.4.1.434.2.2.4.16.15.1.24 isdnteistatus read-only
The status of TEI - always ASSIGNED.
                                     dialerIsdnVN3BChStoDefined 1.3.6.1.4.1.434.2.2.4.16.15.1.25 isdnstodefined read-only
The validity of sto- elements.
                                     dialerIsdnVN3BChStoDnType 1.3.6.1.4.1.434.2.2.4.16.15.1.26 integer read-only
The stored directory number type.
                                     dialerIsdnVN3BChStoDnPlan 1.3.6.1.4.1.434.2.2.4.16.15.1.27 integer read-only
The stored directory number plan.
                                     dialerIsdnVN3BChStoDn 1.3.6.1.4.1.434.2.2.4.16.15.1.28 displaystring read-only
The stored directory number.
                                     dialerIsdnVN3BChStoSubType 1.3.6.1.4.1.434.2.2.4.16.15.1.29 integer read-only
The stored subaddress type.
                                     dialerIsdnVN3BChStoSub 1.3.6.1.4.1.434.2.2.4.16.15.1.30 displaystring read-only
The stored subaddress.
                                     dialerIsdnVN3BChStoBcType 1.3.6.1.4.1.434.2.2.4.16.15.1.31 integer read-only
The stored bearer cap type.
                                     dialerIsdnVN3BChStoBcOpt 1.3.6.1.4.1.434.2.2.4.16.15.1.32 integer read-only
The stored bearer cap option.
                           dialerIsdnVN3DChTable 1.3.6.1.4.1.434.2.2.4.16.16 no-access
The table for the ISDN VN3 DChannel dialer.
                                 dialerIsdnVN3DChEntry 1.3.6.1.4.1.434.2.2.4.16.16.1 no-access
The set of attributes for one port.
                                     dialerIsdnVN3DChPortRef 1.3.6.1.4.1.434.2.2.4.16.16.1.1 portref read-only
The port number for which the VN3 DChannel info is displayed.
                                     dialerIsdnVN3DChTeiValue 1.3.6.1.4.1.434.2.2.4.16.16.1.2 integer read-only
The static TEI value on the D Channel for data communications.
                                     dialerIsdnVN3DChTeiStatus 1.3.6.1.4.1.434.2.2.4.16.16.1.3 isdnteistatus read-only
The status of TEI - always ASSIGNED.
                                     dialerIsdnVN3DChL2State 1.3.6.1.4.1.434.2.2.4.16.16.1.4 isdnl2state read-only
The state of layer 2 subsystem.
                                     dialerIsdnVN3DChP3State 1.3.6.1.4.1.434.2.2.4.16.16.1.5 isdnp3state read-only
The current Packet layer state.
                           dialerIsdnNET3BChTable 1.3.6.1.4.1.434.2.2.4.16.17 no-access
The table for the ISDN NET3 BChannel dialer.
                                 dialerIsdnNET3BChEntry 1.3.6.1.4.1.434.2.2.4.16.17.1 no-access
The set of attributes for one port.
                                     dialerIsdnNET3BChPortRef 1.3.6.1.4.1.434.2.2.4.16.17.1.1 portref read-only
The port number for which the NET3 BChannel info is displayed.
                                     dialerIsdnNET3BChLocalDnType 1.3.6.1.4.1.434.2.2.4.16.17.1.2 isdndntype read-only
The local directory number type.
                                     dialerIsdnNET3BChLocalDnPlan 1.3.6.1.4.1.434.2.2.4.16.17.1.3 isdndnplan read-only
The local directory number plan.
                                     dialerIsdnNET3BChLocalDn 1.3.6.1.4.1.434.2.2.4.16.17.1.4 displaystring read-only
The local directory number type.
                                     dialerIsdnNET3BChLocalSubType 1.3.6.1.4.1.434.2.2.4.16.17.1.5 isdnsubtype read-only
The local subaddress type.
                                     dialerIsdnNET3BChLocalSub 1.3.6.1.4.1.434.2.2.4.16.17.1.6 displaystring read-only
The local directory number type.
                                     dialerIsdnNET3BChRemoteDnType 1.3.6.1.4.1.434.2.2.4.16.17.1.7 isdndntype read-write
The local directory number type.
                                     dialerIsdnNET3BChRemoteDnPlan 1.3.6.1.4.1.434.2.2.4.16.17.1.8 isdndnplan read-write
The local directory number plan.
                                     dialerIsdnNET3BChRemoteDn 1.3.6.1.4.1.434.2.2.4.16.17.1.9 displaystring read-write
The local directory number type.
                                     dialerIsdnNET3BChRemoteSubType 1.3.6.1.4.1.434.2.2.4.16.17.1.10 isdnsubtype read-write
The local subaddress type.
                                     dialerIsdnNET3BChRemoteSub 1.3.6.1.4.1.434.2.2.4.16.17.1.11 displaystring read-write
The local directory number type.
                                     dialerIsdnNET3BChCallType 1.3.6.1.4.1.434.2.2.4.16.17.1.12 isdncalltype read-only
The current call type.
                                     dialerIsdnNET3BChCallSpeed 1.3.6.1.4.1.434.2.2.4.16.17.1.13 isdncallspeed read-write
The current call speed.
                                     dialerIsdnNET3BChBChannel 1.3.6.1.4.1.434.2.2.4.16.17.1.14 isdnbchannels read-only
The current B Channel connected to.
                                     dialerIsdnNET3BChAnsEnable 1.3.6.1.4.1.434.2.2.4.16.17.1.15 isdnansenable read-only
Answer enable status.
                                     dialerIsdnNET3BChTnsNetId 1.3.6.1.4.1.434.2.2.4.16.17.1.16 isdntnsnetid read-only
The transit network id.
                                     dialerIsdnNET3BChTnsIdPlan 1.3.6.1.4.1.434.2.2.4.16.17.1.17 isdntnsidplan read-only
The transit network plan.
                                     dialerIsdnNET3BChTnsDigs 1.3.6.1.4.1.434.2.2.4.16.17.1.18 displaystring read-write
The string identifying the selected long distance carrier. In ISDN terms, it is called the Transit Network Selection. This string is usually made of 3 digits and is assigned by Bellcore.
                                     dialerIsdnNET3BChScrStatus 1.3.6.1.4.1.434.2.2.4.16.17.1.19 isdnscrstatus read-only
The status of call screening.
                                     dialerIsdnNET3BChCallOpt 1.3.6.1.4.1.434.2.2.4.16.17.1.20 isdncallopt read-only
The current call option.
                                     dialerIsdnNET3BChCcState 1.3.6.1.4.1.434.2.2.4.16.17.1.21 isdnnet3bccstate read-only
The state of call control subsystem.
                                     dialerIsdnNET3BChCcNbCause 1.3.6.1.4.1.434.2.2.4.16.17.1.22 integer read-only
The number of causes saved.
                                     dialerIsdnNET3BChCcCause 1.3.6.1.4.1.434.2.2.4.16.17.1.23 octet string read-only
Last causes saved.
                                     dialerIsdnNET3BChL3State 1.3.6.1.4.1.434.2.2.4.16.17.1.24 isdnl3state read-only
The state of layer 3 subsystem.
                                     dialerIsdnNET3BChL2State 1.3.6.1.4.1.434.2.2.4.16.17.1.25 isdnl2state read-only
The state of layer 2 subsystem.
                                     dialerIsdnNET3BChTeiValue 1.3.6.1.4.1.434.2.2.4.16.17.1.26 integer read-only
The static TEI value on the D Channel for data communications.
                                     dialerIsdnNET3BChTeiStatus 1.3.6.1.4.1.434.2.2.4.16.17.1.27 isdnteistatus read-only
The status of TEI - always ASSIGNED.
                                     dialerIsdnNET3BChStoDefined 1.3.6.1.4.1.434.2.2.4.16.17.1.28 isdnstodefined read-only
The validity of sto- elements.
                                     dialerIsdnNET3BChStoDnType 1.3.6.1.4.1.434.2.2.4.16.17.1.29 integer read-only
The stored directory number type.
                                     dialerIsdnNET3BChStoDnPlan 1.3.6.1.4.1.434.2.2.4.16.17.1.30 integer read-only
The stored directory number plan.
                                     dialerIsdnNET3BChStoDn 1.3.6.1.4.1.434.2.2.4.16.17.1.31 displaystring read-only
The stored directory number.
                                     dialerIsdnNET3BChStoSubType 1.3.6.1.4.1.434.2.2.4.16.17.1.32 integer read-only
The stored subaddress type.
                                     dialerIsdnNET3BChStoSub 1.3.6.1.4.1.434.2.2.4.16.17.1.33 displaystring read-only
The stored subaddress.
                                     dialerIsdnNET3BChStoTnsNetId 1.3.6.1.4.1.434.2.2.4.16.17.1.34 integer read-only
The stored transit network id.
                                     dialerIsdnNET3BChStoTnsPlan 1.3.6.1.4.1.434.2.2.4.16.17.1.35 integer read-only
The stored transit network plan.
                                     dialerIsdnNET3BChStoDigs 1.3.6.1.4.1.434.2.2.4.16.17.1.36 displaystring read-only
The stored transit network address.
                                     dialerIsdnNET3BChStoBcType 1.3.6.1.4.1.434.2.2.4.16.17.1.37 integer read-only
The stored bearer cap. type.
                                     dialerIsdnNET3BChStoBcOpt 1.3.6.1.4.1.434.2.2.4.16.17.1.38 integer read-only
The stored bearer cap. option.
                           dialerIsdnTPHBChTable 1.3.6.1.4.1.434.2.2.4.16.18 no-access
The table for the ISDN TPH BChannel dialer.
                                 dialerIsdnTPHBChEntry 1.3.6.1.4.1.434.2.2.4.16.18.1 no-access
The set of attributes for one port.
                                     dialerIsdnTPHBChPortRef 1.3.6.1.4.1.434.2.2.4.16.18.1.1 portref read-only
The port number for which the TPH BChannel info is displayed.
                                     dialerIsdnTPHBChLocalDnType 1.3.6.1.4.1.434.2.2.4.16.18.1.2 isdndntype read-only
The local directory number type.
                                     dialerIsdnTPHBChLocalDnPlan 1.3.6.1.4.1.434.2.2.4.16.18.1.3 isdndnplan read-only
The local directory number plan.
                                     dialerIsdnTPHBChLocalDn 1.3.6.1.4.1.434.2.2.4.16.18.1.4 displaystring read-only
The local directory number type.
                                     dialerIsdnTPHBChLocalSubType 1.3.6.1.4.1.434.2.2.4.16.18.1.5 isdnsubtype read-only
The local subaddress type.
                                     dialerIsdnTPHBChLocalSub 1.3.6.1.4.1.434.2.2.4.16.18.1.6 displaystring read-only
The local directory number type.
                                     dialerIsdnTPHBChRemoteDnType 1.3.6.1.4.1.434.2.2.4.16.18.1.7 isdndntype read-write
The local directory number type.
                                     dialerIsdnTPHBChRemoteDnPlan 1.3.6.1.4.1.434.2.2.4.16.18.1.8 isdndnplan read-write
The local directory number plan.
                                     dialerIsdnTPHBChRemoteDn 1.3.6.1.4.1.434.2.2.4.16.18.1.9 displaystring read-write
The local directory number type.
                                     dialerIsdnTPHBChRemoteSubType 1.3.6.1.4.1.434.2.2.4.16.18.1.10 isdnsubtype read-write
The local subaddress type.
                                     dialerIsdnTPHBChRemoteSub 1.3.6.1.4.1.434.2.2.4.16.18.1.11 displaystring read-write
The local directory number type.
                                     dialerIsdnTPHBChCallType 1.3.6.1.4.1.434.2.2.4.16.18.1.12 isdncalltype read-only
The current call type.
                                     dialerIsdnTPHBChCallSpeed 1.3.6.1.4.1.434.2.2.4.16.18.1.13 isdncallspeed read-write
The current call speed.
                                     dialerIsdnTPHBChBChannel 1.3.6.1.4.1.434.2.2.4.16.18.1.14 isdnbchannels read-only
The current B Channel connected to.
                                     dialerIsdnTPHBChAnsEnable 1.3.6.1.4.1.434.2.2.4.16.18.1.15 isdnansenable read-only
Answer enable status.
                                     dialerIsdnTPHBChScrStatus 1.3.6.1.4.1.434.2.2.4.16.18.1.16 isdnscrstatus read-only
The status of call screening.
                                     dialerIsdnTPHBChCallOpt 1.3.6.1.4.1.434.2.2.4.16.18.1.17 isdncallopt read-only
The current call option.
                                     dialerIsdnTPHBChCcState 1.3.6.1.4.1.434.2.2.4.16.18.1.18 isdntphbccstate read-only
The state of call control subsystem.
                                     dialerIsdnTPHBChCcNbCause 1.3.6.1.4.1.434.2.2.4.16.18.1.19 integer read-only
The number of causes saved.
                                     dialerIsdnTPHBChCcCause 1.3.6.1.4.1.434.2.2.4.16.18.1.20 octet string read-only
Last causes saved.
                                     dialerIsdnTPHBChL3State 1.3.6.1.4.1.434.2.2.4.16.18.1.21 isdnl3state read-only
The state of layer 3 subsystem.
                                     dialerIsdnTPHBChL2State 1.3.6.1.4.1.434.2.2.4.16.18.1.22 isdnl2state read-only
The state of layer 2 subsystem.
                                     dialerIsdnTPHBChTeiValue 1.3.6.1.4.1.434.2.2.4.16.18.1.23 integer read-only
The static TEI value on the D Channel for data communications.
                                     dialerIsdnTPHBChTeiStatus 1.3.6.1.4.1.434.2.2.4.16.18.1.24 isdnteistatus read-only
The status of TEI - always ASSIGNED.
                                     dialerIsdnTPHBChStoDefined 1.3.6.1.4.1.434.2.2.4.16.18.1.25 isdnstodefined read-only
The validity of sto- elements.
                                     dialerIsdnTPHBChStoDnType 1.3.6.1.4.1.434.2.2.4.16.18.1.26 integer read-only
The stored directory number type.
                                     dialerIsdnTPHBChStoDnPlan 1.3.6.1.4.1.434.2.2.4.16.18.1.27 integer read-only
The stored directory number plan.
                                     dialerIsdnTPHBChStoDn 1.3.6.1.4.1.434.2.2.4.16.18.1.28 displaystring read-only
The stored directory number.
                                     dialerIsdnTPHBChStoSubType 1.3.6.1.4.1.434.2.2.4.16.18.1.29 integer read-only
The stored subaddress type.
                                     dialerIsdnTPHBChStoSub 1.3.6.1.4.1.434.2.2.4.16.18.1.30 displaystring read-only
The stored subaddress.
                                     dialerIsdnTPHBChStoBcType 1.3.6.1.4.1.434.2.2.4.16.18.1.31 integer read-only
The stored bearer cap. type.
                                     dialerIsdnTPHBChStoBcOpt 1.3.6.1.4.1.434.2.2.4.16.18.1.32 integer read-only
The stored bearer cap. option.
                           dialerIsdnTPHDChTable 1.3.6.1.4.1.434.2.2.4.16.19 no-access
The table for the ISDN TPH DChannel dialer.
                                 dialerIsdnTPHDChEntry 1.3.6.1.4.1.434.2.2.4.16.19.1 no-access
The set of attributes for one port.
                                     dialerIsdnTPHDChPortRef 1.3.6.1.4.1.434.2.2.4.16.19.1.1 portref read-only
The port number for which the TPH DChannel info is displayed.
                                     dialerIsdnTPHDChTeiValue 1.3.6.1.4.1.434.2.2.4.16.19.1.2 integer read-only
The static TEI value on the D Channel for data communications.
                                     dialerIsdnTPHDChTeiStatus 1.3.6.1.4.1.434.2.2.4.16.19.1.3 isdnteistatus read-only
The status of TEI - always ASSIGNED.
                                     dialerIsdnTPHDChL2State 1.3.6.1.4.1.434.2.2.4.16.19.1.4 isdnl2state read-only
The state of layer 2 subsystem.
                                     dialerIsdnTPHDChP3State 1.3.6.1.4.1.434.2.2.4.16.19.1.5 isdnp3state read-only
The current Packet layer state.