EDGELINK-MIB: View SNMP OID List / Download MIB

VENDOR: TELCO SYSTEMS NAC


 Home MIB: EDGELINK-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 telco 1.3.6.1.4.1.564
         edgeLink 1.3.6.1.4.1.564.101
                 elM13v1 1.3.6.1.4.1.564.101.1
                     elDS1CM 1.3.6.1.4.1.564.101.1.1
                         elDS1CMTable 1.3.6.1.4.1.564.101.1.1.1 no-access
DS1 Configuration Management table.
                             elDS1CMEntry 1.3.6.1.4.1.564.101.1.1.1.1 no-access
DS1 Configuration Management table entry.
                                 elDS1CMChannelNumber 1.3.6.1.4.1.564.101.1.1.1.1.1 integer read-only
Table index, the DS1 channel number.
                                 elDS1CMLineCode 1.3.6.1.4.1.564.101.1.1.1.1.2 integer read-write
Select DS1 line code for the channel number selected by this tables index. Enumeration: 'ds1LineCodeB8ZS': 1, 'ds1LineCodeAMI': 0.
                                 elDS1CMLineBuildout 1.3.6.1.4.1.564.101.1.1.1.1.3 integer read-write
Select line build-out for the DS1 line selected by this tables index:, 0 to 133 ft, or 133 to 266 ft, 266 to 399 ft, 399 to 533 ft, or 533 to 655 ft. Enumeration: 'ds1LineBuildout399to533ft': 3, 'ds1LineBuildout133to266ft': 1, 'ds1LineBuildout0to133ft': 0, 'ds1LineBuildout533to655ft': 4, 'ds1LineBuildout266to399ft': 2.
                                 elDS1CMLoopbackMode 1.3.6.1.4.1.564.101.1.1.1.1.4 integer read-write
Set the DS1 loopback mode to Line, terminal, remote, or none. In M13 Mode, issuing a DS1 Remote Terminal Lpbk will cause any previous Remote DS1 Terminal Lpbk(s) to be Dropped. Enumeration: 'ds1LpbkNone': 1, 'ds1LpbkFacility': 3, 'ds1LpbkRemoteTerminal': 4, 'ds1LpbkTerminal': 2.
                                 elDS1CMServiceMode 1.3.6.1.4.1.564.101.1.1.1.1.5 integer read-write
Set the DS1 service mode for the channel indicated to in-service or out-of-service. Certain service effecting operations can not be initiated unless the DS1 channel is placed out-of-service. Enumeration: 'ds1SetOutOfService': 0, 'ds1SetInService': 1.
                                 elDS1CMInterfaceEquipped 1.3.6.1.4.1.564.101.1.1.1.1.6 integer read-write
DS1 Interfaces may be 'equipped' or 'unequipped'. No PM or FM operations will occur on an unequipped interface. Access is allowed to MIB variables which correspond to unequipped interfaces, although PM and FM values will be zeros. When the DS1 interface is Disaled an AIS will be sent on the channel. Enumeration: 'ds1Equipped': 0, 'ds1Disable': 3, 'ds1Unequipped': 1.
                                 elDS1CMChannelName 1.3.6.1.4.1.564.101.1.1.1.1.7 displaystring read-write
A ChannelName can be assigned for each DS1 channel. The Channel name cannot be more than 10 characters.
                                 elDS1CMInputStatus 1.3.6.1.4.1.564.101.1.1.1.1.8 integer read-only
Reports the input State of the DS1 channel indexed by Channel Number. Enumeration: 'ds1NoInputpresent': 1, 'ds1InputPresent': 0.
                                 elDS1CMMaskState 1.3.6.1.4.1.564.101.1.1.1.1.9 integer read-only
Get the state of the DS1 Channel identified by the index. The Mask state identifies the Autosense State of the DS1 Channel. Enumeration: 'ds1InputInit': 1, 'ds1DisabledState': 8, 'ds1AlarmedState': 7, 'ds1UnEquipped': 5, 'ds1StatusReported': 6, 'ds1WaitingForInput': 2, 'ds1TimerRunning': 3, 'ds1MonitorActivated': 4.
                                 elDS1CMInterfaceRescan 1.3.6.1.4.1.564.101.1.1.1.1.10 integer read-write
Rescan the DS1 Channel identified by the index. Enumeration: 'ds1AllChannelsAutoSenseDisable': 2, 'ds1ChannelRescan': 3, 'ds1AllChannelsAutoSenseEnable': 1.
                         elALLDS1CMLineCode 1.3.6.1.4.1.564.101.1.1.2 integer read-write
Set DS1 line code for all DS1 channels. A value Inderminate(3) will be returned if All the DS1 Channels are not set to either ds1LineCodeAMI or ds1LineCodeB8ZS. Enumeration: 'indeterminate': 2, 'ds1LineCodeB8ZS': 1, 'ds1LineCodeAMI': 0.
                         elALLDS1CMLineBuildout 1.3.6.1.4.1.564.101.1.1.3 integer read-write
Select line build-out for All the DS1 lines to 0 to 133 ft, or 133 to 266 ft, 266 to 399 ft, 399 to 533 ft, or 533 to 655 ft. Enumeration: 'ds1LineBuildout399to533ft': 3, 'ds1LineBuildout133to266ft': 1, 'indeterminate': 5, 'ds1LineBuildout533to655ft': 4, 'ds1LineBuildout266to399ft': 2, 'ds1LineBuildout0to133ft': 0.
                         elALLDS1CMLoopbackMode 1.3.6.1.4.1.564.101.1.1.4 integer read-write
Set the DS1 loopback mode to Line, Terminal, Remote, or None for All the DS1 Channels. In M13 Mode, issuing a DS1 Remote Terminal Lpbk will cause any previous Remote DS1 Terminal Lpbk(s) to be dropped. Enumeration: 'ds1LpbkNone': 1, 'ds1LpbkFacility': 3, 'indeterminate': 5, 'ds1LpbkRemoteTerminal': 4, 'ds1LpbkTerminal': 2.
                         elALLDS1CMServiceMode 1.3.6.1.4.1.564.101.1.1.5 integer read-write
Set the DS1 service mode for All DS1 channels to in-service or out-of-service. Certain service effecting operations can not be initiated unless All the DS1 channels will be placed out-of-service. Enumeration: 'ds1SetOutOfService': 0, 'indeterminate': 2, 'ds1SetInService': 1.
                         elALLDS1CMInterfaceEquipped 1.3.6.1.4.1.564.101.1.1.6 integer read-write
Set All the DS1 Channels to 'equipped' or 'unequipped' state. No PM or FM operations will occur on an unequipped DS1 interface. Access is allowed to MIB variables which correspond to unequipped interfaces, although PM and FM values will be zeros. Enumeration: 'ds1Equipped': 0, 'ds1Unequipped': 1, 'indeterminate': 2.
                     elCM 1.3.6.1.4.1.564.101.1.2
                         elCMSystemStatus 1.3.6.1.4.1.564.101.1.2.1 displaystring read-only
This DisplayString gives the summary information about the Current EdgeLink100 System Status. The Description includes ... 1) chasisType --- UnProtected(1) / Protected(0) 2) Active Module --- Card-A(1) / Card-B (2) 3) Fault LED Status --- ON(1 -7) / OFF(0) 4) Abnormal LED Status --- ON(1) / OFF(0). Fault LED Status is a combined value of the three bits each representing CRITICAL, MAJOR and MINOR Alarms. The three LEDS are inside the EL100 Case on the Cards. 0 => No Alarms. 1 => Critical Alarm (001) 2 => Major Alarm (010) 3 => Critical and Major Alarms (011) 4 => Minor Alarm (100) 5 => Minor and Critical Alarms (101) 6 => Minor and Major Alarms (110) 7 => Major Minor and Critical Alarms (111).
                         elCMDS3ParityMode 1.3.6.1.4.1.564.101.1.2.2 integer read-write
Select C-bit or P-bit parity mode for DS3 interface. This Object can't be set when ServiceMode is IN-Service Enumeration: 'ds3pBitParityMode': 2, 'ds3cBitParityMode': 4.
                         elCMDS3LineBuildout 1.3.6.1.4.1.564.101.1.2.3 integer read-write
Select line build-out for DS3 Line, 0 to 100 ft, 100 to 200 ft, or 200-450.This MIB Object can't be set when ServiceMode is IN-Service Enumeration: 'ds3LineBuildout200to450ft': 2, 'ds3LineBuildout0to100ft': 0, 'ds3LineBuildout100to200ft': 1.
                         elCMDS3TxTiming 1.3.6.1.4.1.564.101.1.2.4 integer read-write
Select mode for DS3 transmit timing. This MIB Object can't be set when ServiceMode is IN-Service Enumeration: 'ds3TxTimingLocal': 2, 'ds3TxTimingLooped': 1.
                         elCMProtectionMode 1.3.6.1.4.1.564.101.1.2.5 integer read-write
In unprotected mode, switching is prohibited. While in protected mode, a standing minor alarm will occur if the off-line card is unavailable or not in operation. The system can be set to unprotected mode to turnoff this alarm. If the off-line card becomes operational while in unprotected mode, the mode is automatically switched to protected mode. The user will not be allowed to set the system to protectedMode. Enumeration: 'protModeUnprotected': 1, 'protModeProtected': 0.
                         elCMCardSelect 1.3.6.1.4.1.564.101.1.2.6 integer read-write
Read or select choice of on-line card. This operation will force a switch to occur if the off-line card is selected. Enumeration: 'cardAOnline': 0, 'cardBOnline': 1.
                         elCMClearTooManySwitches 1.3.6.1.4.1.564.101.1.2.7 integer read-write
Clear switching-disabled state which occurs as a result of too many switches between the cards in a protected system in a 10 minute interval. ClearTooManySwitchesLock command is used to remove the standing Alarm. On a read, the value indeterminate will be returned if the SNMP variable was never set to clearTooManySwitchesLock(2), otherwise clearTooManySwitchesLock(2) will be returned. Enumeration: 'clearTooManySwitchesLock': 2, 'indeterminate': 1.
                         elCMDS3LoopbackMode 1.3.6.1.4.1.564.101.1.2.8 integer read-write
Set the DS3 loopback mode to line, terminal, remote, or none. The System can't be set to ds3LpbkRemoteFacility when it is in M13 Mode. The Terminal LoopBack is feasible only when the elCMDS3TxTiming Object is set to ds3TxTimingLocal. Enumeration: 'ds3LpbkNone': 1, 'ds3LpbkRemoteFacility': 4, 'ds3LpbkTerminal': 2, 'ds3LpbkFacility': 3.
                         elCMDS3ServiceMode 1.3.6.1.4.1.564.101.1.2.9 integer read-write
Set the DS3 service mode to in-service or out-of-service. Certain service effecting operations can not be initiated unless the DS3 channel is placed out-of-service. Enumeration: 'ds3SetInService': 1, 'ds3SetOutOfService': 0.
                         elCMCurTimeDate 1.3.6.1.4.1.564.101.1.2.10 displaystring read-write
Read or set the system real time clock. The string is in the form MM/DD/YYYY HH:MM:SS.
                         elCMBerThreshold 1.3.6.1.4.1.564.101.1.2.11 integer read-write
Set the BER Threshold value for the system to 10-6, 10-7, 10-8 or 10-9. BerThershold can't changed when the ServiceMode is IN-Service. Enumeration: 'ds3BerThreshold10-9': 4, 'ds3BerThreshold10-8': 3, 'ds3BerThreshold10-7': 2, 'ds3BerThreshold10-6': 1.
                         elCMSystemInfo 1.3.6.1.4.1.564.101.1.2.12 displaystring read-only
Gets information about the MPU type, board revision, card revision level, software revision, CLEI code, MAC address, and Date of manufacture.
                         elCMPPPPortBaudRate 1.3.6.1.4.1.564.101.1.2.13 integer read-only
Specifies the baud rate on the craft/PPP port when that port is running PPP (i.e. when carrier detect is asserted). Enumeration: 'baud1200': 2, 'baud28800': 8, 'baud14400': 6, 'baud300': 1, 'baud19200': 7, 'baud115200': 11, 'baud2400': 3, 'baud4800': 4, 'baud9600': 5, 'baud38400': 9, 'baud57600': 10.
                     elCMIfc 1.3.6.1.4.1.564.101.1.3
                         elCMRemoteCBitIPAddress 1.3.6.1.4.1.564.101.1.3.1 ipaddress read-write
This is the IP address of the partner EdgeLink's C-bit channel interface. This is used for partner-to-partner communications. Must be on same subnet as elCMLocalCBitIPAddress. This IP must be the same as elCMLocalCBitIPAddress on the partner device.
                         elCMLocalCBitIPAddress 1.3.6.1.4.1.564.101.1.3.2 ipaddress read-write
This is the IP address of my C-bit channel interface and is used for partner-to-partner communications. Must be on same subnet as elCMRemoteCBitIPAddress. This IP must be the same as elCMRemoteCBitIPAddress on the partner device.
                         elCMCBitIPSubnetMask 1.3.6.1.4.1.564.101.1.3.3 ipaddress read-write
Specifies the subnet address mask for the C-Bit IP channel.
                         elCMRemotePPPIPAddress 1.3.6.1.4.1.564.101.1.3.4 ipaddress read-write
This is the IP Address for the Remote Client during PPP session.
                         elCMIfcTable 1.3.6.1.4.1.564.101.1.3.5 no-access
Ethernet/PPP Interfaces table.
                             elCMIfcEntry 1.3.6.1.4.1.564.101.1.3.5.1 no-access
Ethernet/PPP Interfaces table entry.
                                 elCMIfcInterfaceNumber 1.3.6.1.4.1.564.101.1.3.5.1.1 integer read-only
Table index. The table has one row for each external IP interface, Ethernet and PPP. Enumeration: 'ifEthernet': 1, 'ifPPP': 2.
                                 elCMIfcMyIPAddr 1.3.6.1.4.1.564.101.1.3.5.1.2 ipaddress read-write
The IP address for this interface.
                                 elCMIfcMyIPSubnetAddrMask 1.3.6.1.4.1.564.101.1.3.5.1.3 ipaddress read-write
Subnet address mask for this IP address.
                                 elCMIfcMyDefaultGatewayAddr 1.3.6.1.4.1.564.101.1.3.5.1.4 ipaddress read-write
Default gateway address for this interface. If 0, it will be ignored.
                                 elCMIfcTrapSendAddr1 1.3.6.1.4.1.564.101.1.3.5.1.5 ipaddress read-write
Address 1 of 4 to send traps to. If 0, will be ignored.
                                 elCMIfcTrapSendAddr2 1.3.6.1.4.1.564.101.1.3.5.1.6 ipaddress read-write
Address 2 of 4 to send traps to. If 0, will be ignored.
                                 elCMIfcTrapSendAddr3 1.3.6.1.4.1.564.101.1.3.5.1.7 ipaddress read-write
Address 3 of 4 to send traps to. If 0, will be ignored.
                                 elCMIfcTrapSendAddr4 1.3.6.1.4.1.564.101.1.3.5.1.8 ipaddress read-write
Address 4 of 4 to send traps to. If 0, will be ignored.
                     elPM 1.3.6.1.4.1.564.101.1.4
                         elPMDS3TotalSwitches 1.3.6.1.4.1.564.101.1.4.1 integer read-only
Number of switches which have occurred since startup, or since last time PM metrics were cleared.
                         elPMClearAllPMMetrics 1.3.6.1.4.1.564.101.1.4.2 integer read-write
Clears all Performance Management related metrics and statistics. On a read, the value indeterminate(1) will be returned if this variable was never set to clearAllPMMetrics(2), otherwise clearAllPMMetrics(2) will be returned. Enumeration: 'indeterminate': 1, 'clearAllPMMetrics': 2.
                     elDS1PM 1.3.6.1.4.1.564.101.1.5
                         elDS1PMTimeElapsed 1.3.6.1.4.1.564.101.1.5.1 integer read-only
The number of elapsed seconds in the current interval of DS1 PM data.
                         elDS1PMValidIntervals 1.3.6.1.4.1.564.101.1.5.2 integer read-only
The number of intervals which have elapsed and for which PM data can read, up to and including 96.
                     elDS1PMCur 1.3.6.1.4.1.564.101.1.6
                         elDS1PMCurTable 1.3.6.1.4.1.564.101.1.6.1 no-access
DS1 current PM metrics table.
                             elDS1PMCurEntry 1.3.6.1.4.1.564.101.1.6.1.1 no-access
DS1 current PM metrics table entry.
                                 elDS1PMCurChannelNumber 1.3.6.1.4.1.564.101.1.6.1.1.1 integer read-only
Table index. Rows are indexed by DS1 channel.
                                 elDS1PMCurLineCodeViolations 1.3.6.1.4.1.564.101.1.6.1.1.2 integer read-only
Number of line code violations in the current 15 minute interval.
                                 elDS1PMCurErroredSeconds 1.3.6.1.4.1.564.101.1.6.1.1.3 integer read-only
Number of errored seconds in the current interval.
                     elDS1PMIvl 1.3.6.1.4.1.564.101.1.7
                         elDS1PMIvlTable 1.3.6.1.4.1.564.101.1.7.1 no-access
DS1 Interval PM metrics table.
                             elDS1PMIvlEntry 1.3.6.1.4.1.564.101.1.7.1.1 no-access
DS1 Interval PM metrics table entry.
                                 elDS1PMIvlChannelNumber 1.3.6.1.4.1.564.101.1.7.1.1.1 integer read-only
Primary table index, a DS1 channel number.
                                 elDS1PMIvlIntervalNumber 1.3.6.1.4.1.564.101.1.7.1.1.2 integer read-only
Secondary table index, the interval number.
                                 elDS1PMIvlLineCodeViolations 1.3.6.1.4.1.564.101.1.7.1.1.3 integer read-only
Number of line code violations for the channel specified by elDS1PMIvlChannelNumber and in the interval indicated by elDS1PMIvlIntervalNumber.
                                 elDS1PMIvlErroredSeconds 1.3.6.1.4.1.564.101.1.7.1.1.4 integer read-only
Number of errored seconds for the channel specified by elDS1PMIvlChannelNumber and in the interval indicated by elDS1PMIvlIntervalNumber.
                     elDS1PMTot 1.3.6.1.4.1.564.101.1.8
                         elDS1PMTotTable 1.3.6.1.4.1.564.101.1.8.1 no-access
DS1 Total PM metrics table.
                             elDS1PMTotEntry 1.3.6.1.4.1.564.101.1.8.1.1 no-access
DS1 Total PM metrics table entry.
                                 elDS1PMTotChannelNumber 1.3.6.1.4.1.564.101.1.8.1.1.1 integer read-only
Table index, DS1 channel number.
                                 elDS1PMTotLineCodeViolations 1.3.6.1.4.1.564.101.1.8.1.1.2 integer read-only
Total number of line code violations for the channel specified by elDS1PMIvlChannelNumber.
                                 elDS1PMTotErroredSeconds 1.3.6.1.4.1.564.101.1.8.1.1.3 integer read-only
Total number of errored seconds for the channel specified by elDS1PMIvlChannelNumber.
                     elFM 1.3.6.1.4.1.564.101.1.9
                         elFMFillAlarmLogTable 1.3.6.1.4.1.564.101.1.9.1 integer read-write
Take a snapshot of the alarm log. Must be done before reading the log into the alarm log table, elFMAlmLogTable. On a read, the value indeterminate(1) will be returned if the SNMP variable was never set to fillAlarmLogTable(2), otherwise fillAlarmLogTable(2) will be returned. Enumeration: 'fillAlarmLogTable': 2, 'indeterminate': 1.
                         elFMClearAlarmLog 1.3.6.1.4.1.564.101.1.9.2 integer read-write
Clears the system's alarm log. On a read, the value indeterminate(1) will be returned if the SNMP variable was never set to clearAlarmLog(2) otherwise clearAlarmLog(2) will be returned. Enumeration: 'indeterminate': 1, 'clearAlarmLog': 2.
                         elFMDS1AutoSenseMode 1.3.6.1.4.1.564.101.1.9.3 integer read-write
The AutoSense Mode will be enabled or Disabled on all the 28 Ds1 channels. The Rescan command will scan all the equipped DS1 Inputs and update their state. Enumeration: 'disableDs1AutoSense': 2, 'rescanAllDs1Inputs': 3, 'enableDs1AutoSense': 1.
                         elFMDS1InputAlarmMode 1.3.6.1.4.1.564.101.1.9.4 integer read-write
This command changes the severity of the DS1 LOS as either Major alarm or status depending on the selection. Enumeration: 'alarmOnDs1InputLos': 1, 'statusOnDs1InputLos': 0.
                     elFMAlmLog 1.3.6.1.4.1.564.101.1.10
                           elFMAlmLogTable 1.3.6.1.4.1.564.101.1.10.1 no-access
Alarm log table. This table holds a snapshot of the alarm log, and is filled by elFMFillAlarmLogTable.
                               elFMAlmLogEntry 1.3.6.1.4.1.564.101.1.10.1.1 no-access
Alarm log table entry.
                                   elFMAlmLogEntryNumber 1.3.6.1.4.1.564.101.1.10.1.1.1 integer read-only
Table index, between 1 and 100.
                                   elFMAlmLogTableAlarmNumber 1.3.6.1.4.1.564.101.1.10.1.1.2 integer read-only
Alarm number.
                                   elFMAlmLogTableDescription 1.3.6.1.4.1.564.101.1.10.1.1.3 displaystring read-only
Alarm description.
                                   elFMAlmLogTableStatus 1.3.6.1.4.1.564.101.1.10.1.1.4 integer read-only
Alarm status. Enumeration: 'clear': 0, 'set': 1.
                                   elFMAlmLogTableTimestamp 1.3.6.1.4.1.564.101.1.10.1.1.5 displaystring read-only
Alarm time stamp in the form mm/dd/yy hh:mm:ss.
                                   elFMAlmLogTableChannel 1.3.6.1.4.1.564.101.1.10.1.1.6 integer read-only
Channel associated with the alarm, if any.
                     elFMCurAlm 1.3.6.1.4.1.564.101.1.11
                           elFMCurAlmTable 1.3.6.1.4.1.564.101.1.11.1 no-access
Current alarms table.
                               elFMCurAlmEntry 1.3.6.1.4.1.564.101.1.11.1.1 no-access
Current alarms table entry.
                                   elFMCurAlmTableAlarmNumber 1.3.6.1.4.1.564.101.1.11.1.1.1 integer read-only
Primary table index, an alarm number.
                                   elFMCurAlmTableChannel 1.3.6.1.4.1.564.101.1.11.1.1.2 integer read-only
Secondary table index. Channel associated with the alarm, can be 0 if channel number is irrelevant to the alarm.
                                   elFMCurAlmTableDescription 1.3.6.1.4.1.564.101.1.11.1.1.3 displaystring read-only
Alarm description.
                     elFMTrapFields 1.3.6.1.4.1.564.101.1.12
                           elFMTrapAlarmNumber 1.3.6.1.4.1.564.101.1.12.1 integer read-only
Alarm number associated with the last sent trap.
                           elFMTrapAlarmText 1.3.6.1.4.1.564.101.1.12.2 displaystring read-only
Alarm text associated with the last sent trap.
                           elFMTrapTimeStamp 1.3.6.1.4.1.564.101.1.12.3 displaystring read-only
Time stamp associated with the last sent trap.
                           elFMTrapAlarmStatus 1.3.6.1.4.1.564.101.1.12.4 integer read-only
Alarm status associated with the last sent trap.
                           elFMTrapChannelNumber 1.3.6.1.4.1.564.101.1.12.5 integer read-only
Channel number associated with the last sent trap, if any.
                       edgeLinkEvent 1.3.6.1.4.1.564.101.10.1
This trap is sent when an alarm event is set or cleard.