EDB-snmp: View SNMP OID List / Download MIB

VENDOR: FIBRONICS


 Home MIB: EDB-snmp
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 private 1.3.6.1.4
     enterprises 1.3.6.1.4.1
         fibronics 1.3.6.1.4.1.22
               trap 1.3.6.1.4.1.22.3
                   traprun 1.3.6.1.4.1.22.3.1
                       rTrapAddrTbl 1.3.6.1.4.1.22.3.1.1 no-access
Table of managers to which traps must be sent. Up to 10 entries in table
                           rTrapAddrEntry 1.3.6.1.4.1.22.3.1.1.1 no-access
                               rTrapAddrAddr 1.3.6.1.4.1.22.3.1.1.1.1 ipaddress read-write
IP address of entity requesting event notification
                               rTrapAddrComm 1.3.6.1.4.1.22.3.1.1.1.2 octet string read-write
Community name the receiving entity will expect. When reading the instance of this object the value has no meaning.
                               rTrapAddrVer 1.3.6.1.4.1.22.3.1.1.1.3 integer read-write
Version number supported by destination node
                               rTrapAddrType 1.3.6.1.4.1.22.3.1.1.1.4 octet string read-write
Type of event that should be reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - Enterprise Traps other than fmDiagGenericTrap
                               rTrapAddrState 1.3.6.1.4.1.22.3.1.1.1.5 integer read-write
Determines status of this entry Enumeration: 'active': 1, 'inactive': 2.
                               rTrapAddrFlag 1.3.6.1.4.1.22.3.1.1.1.6 integer read-write
If the entry is fixed, it can not be deleted because of aging Enumeration: 'fixed': 0, 'removable': 1.
                               rTrapAddrAge 1.3.6.1.4.1.22.3.1.1.1.7 integer read-only
Aging time of the entry (in sec)
                       rTrapLearning 1.3.6.1.4.1.22.3.1.2 integer read-only
Learn the addresses of the managers automatically. Enumeration: 'enable': 1, 'disable': 0.
                       rTrapAging 1.3.6.1.4.1.22.3.1.3 integer read-only
Time in sec. until we erase a trap entry
                   traperm 1.3.6.1.4.1.22.3.2
                       pTrapAddrTbl 1.3.6.1.4.1.22.3.2.1 no-access
Table of managers to which traps must be sent. Up to 10 entries in table
                           pTrapAddrEntry 1.3.6.1.4.1.22.3.2.1.1 no-access
                               pTrapAddrAddr 1.3.6.1.4.1.22.3.2.1.1.1 ipaddress read-write
IP address of entity requesting event notification
                               pTrapAddrComm 1.3.6.1.4.1.22.3.2.1.1.2 octet string read-write
Community name the receiving entity will expect. When reading the instance of this object the value has no meaning.
                               pTrapAddrVer 1.3.6.1.4.1.22.3.2.1.1.3 integer read-write
Version number supported by destination node
                               pTrapAddrType 1.3.6.1.4.1.22.3.2.1.1.4 octet string read-write
Type of event that should be reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - all Enterprise Traps other than fmDiagGenericTrap
                               pTrapAddrState 1.3.6.1.4.1.22.3.2.1.1.5 integer read-write
Determines status of this entry Enumeration: 'active': 1, 'inactive': 2.
                       pTrapLearning 1.3.6.1.4.1.22.3.2.2 integer read-write
Learn the addresses of the managers automatically. Enumeration: 'enable': 1, 'disable': 0.
                       pTrapAging 1.3.6.1.4.1.22.3.2.3 integer read-write
Time in sec. until we erase a trap entry
                   trapvar 1.3.6.1.4.1.22.3.3
               fm800 1.3.6.1.4.1.22.51
                     fmsystem 1.3.6.1.4.1.22.51.1
                         fmsystemrun 1.3.6.1.4.1.22.51.1.1
                             fmSystemPSAdmin 1.3.6.1.4.1.22.51.1.1.1 integer read-write
Changes power supply to primary or secondary. When reading the instance of this object the value has no meaning. Enumeration: 'primary-power': 1, 'secondary-power': 2.
                             fmSystemPSOper 1.3.6.1.4.1.22.51.1.1.2 integer read-only
Which power supply active Enumeration: 'primary-power': 1, 'secondary-power': 2.
                             fmSystemPSCfg 1.3.6.1.4.1.22.51.1.1.3 integer read-write
Configuration of power supply Enumeration: 'primary-power': 1, 'primary-and-secondary-power': 3, 'secondary-power': 2.
                             fmSystemReset 1.3.6.1.4.1.22.51.1.1.4 integer read-write
Resetting the CARD. When reading the instance of this object the value has no meaning. cold reset is performed with selftest , while warm start is performed without selftest Enumeration: 'meaning-less-value': 127, 'cold-reset': 0, 'power-up': 2, 'warm-reset': 1.
                             fmSystemSelfTestLevel 1.3.6.1.4.1.22.51.1.1.5 integer read-write
Type of self test to be executed upon cold-reset Enumeration: 'none': 0, 'full': 2, 'partial': 1, 'extended': 3.
                             fmSystemVersion 1.3.6.1.4.1.22.51.1.1.6 octet string read-only
Version of the station. The version includes station type, hardware version and software version. The string can include CR and LF
                             fmSystemIpAddr 1.3.6.1.4.1.22.51.1.1.7 ipaddress read-only
IP address of the agent
                             fmSystemIPNetMask 1.3.6.1.4.1.22.51.1.1.8 ipaddress read-only
IP Network Mask
                             fmSystemIPDefGway 1.3.6.1.4.1.22.51.1.1.9 ipaddress read-only
Default Gateway Address
                             fmSystemFileServer 1.3.6.1.4.1.22.51.1.1.10 ipaddress read-write
IP address to which a TFTP for boot is sent.
                             fmSystemBootFile 1.3.6.1.4.1.22.51.1.1.11 octet string read-only
Path and file name that is sent as a TFTP request
                             fmSystemBootMode 1.3.6.1.4.1.22.51.1.1.12 integer read-only
Method for booting Enumeration: 'internal-memory': 1, 'bootp': 2.
                             fmSystemDownLoad 1.3.6.1.4.1.22.51.1.1.13 integer read-write
Downloading the EDB. When reading the instance of this object the value has no meaning. Enumeration: 'download': 1, 'meaning-less-value': 127.
                             fmSystemSlipIpAddr 1.3.6.1.4.1.22.51.1.1.14 ipaddress read-only
SLIP IP address. This is object is available only when slip interface exist
                             fmSystemSlipIPNetMask 1.3.6.1.4.1.22.51.1.1.15 ipaddress read-only
SLIP IP Network Mask This is object is available only when slip interface exist
                             fmSystemSlipBaudRate 1.3.6.1.4.1.22.51.1.1.16 integer read-only
SLIP Baud rate This is object is available only when slip interface exist Enumeration: 'baud1200': 0, 'baud19200': 4, 'baud2400': 1, 'baud4800': 2, 'baud9600': 3, 'baud38400': 5.
                             fmSystemSlipParity 1.3.6.1.4.1.22.51.1.1.17 integer read-only
SLIP Parity This is object is available only when slip interface exist Enumeration: 'even': 2, 'none': 0, 'odd': 1.
                             fmSystemSlipStopBits 1.3.6.1.4.1.22.51.1.1.18 integer read-only
SLIP Stop Bits This is object is available only when slip interface exist Enumeration: 'two': 1, 'one': 0.
                         fmsystemperm 1.3.6.1.4.1.22.51.1.2
                             pfmSystemIpAddr 1.3.6.1.4.1.22.51.1.2.7 ipaddress read-write
IP address of the agent
                             pfmSystemIPNetMask 1.3.6.1.4.1.22.51.1.2.8 ipaddress read-write
IP Network Mask
                             pfmSystemIPDefGway 1.3.6.1.4.1.22.51.1.2.9 ipaddress read-write
Default Gateway Address
                             pfmSystemFileServer 1.3.6.1.4.1.22.51.1.2.10 ipaddress read-write
IP address to which a TFTP for boot is sent.
                             pfmSystemBootFile 1.3.6.1.4.1.22.51.1.2.11 octet string read-write
Path and file name that is sent as a TFTP request
                             pfmSystemBootMode 1.3.6.1.4.1.22.51.1.2.12 integer read-write
Method for booting Enumeration: 'internal-memory': 1, 'bootp': 2.
                             pfmSystemReadCommunity 1.3.6.1.4.1.22.51.1.2.13 octet string read-write
Community string for reading When reading the instance of this object the value has no meaning.
                             pfmSystemWriteCommunity 1.3.6.1.4.1.22.51.1.2.14 octet string read-write
Community string for writing When reading the instance of this object the value has no meaning.
                             pfmSystemSlipIpAddr 1.3.6.1.4.1.22.51.1.2.15 ipaddress read-write
SLIP IP address This is object is available only when slip interface exist
                             pfmSystemSlipIPNetMask 1.3.6.1.4.1.22.51.1.2.16 ipaddress read-write
SLIP IP Network Mask This is object is available only when slip interface exist
                             pfmSystemSlipBaudRate 1.3.6.1.4.1.22.51.1.2.17 integer read-write
SLIP Baud rate This is object is available only when slip interface exist Enumeration: 'baud1200': 0, 'baud19200': 4, 'baud2400': 1, 'baud4800': 2, 'baud9600': 3, 'baud38400': 5.
                             pfmSystemSlipParity 1.3.6.1.4.1.22.51.1.2.18 integer read-write
SLIP Parity This is object is available only when slip interface exist Enumeration: 'even': 2, 'none': 0, 'odd': 1.
                             pfmSystemSlipStopBits 1.3.6.1.4.1.22.51.1.2.19 integer read-write
SLIP Stop Bits This is object is available only when slip interface exist Enumeration: 'two': 1, 'one': 0.
                     fmslot 1.3.6.1.4.1.22.51.2
                         fmSlotMasterClear 1.3.6.1.4.1.22.51.2.1 integer read-write
Upon writing, performs a master clear command on all the slots. When reading the instance of this object the value has no meaning.
                         fmSlotTable 1.3.6.1.4.1.22.51.2.2 no-access
                             fmSlotEntry 1.3.6.1.4.1.22.51.2.2.1 no-access
                                 fmSlotIndex 1.3.6.1.4.1.22.51.2.2.1.1 integer read-only
Slot Number
                                 fmSlotID 1.3.6.1.4.1.22.51.2.2.1.2 integer read-write
ID of the card in the slot Enumeration: 'cc892-427': 65580, 'cc892-46B': 65553, 'cc892-422': 65590, 'cc892-832': 65537, 'cc892-420': 65589, 'general-smartcard': 131072, 'cc892-260': 65576, 'cc832-12-ID': 65542, 'cc832-10': 2, 'cc832-12': 3, 'cc892-401': 65592, 'lc303-129': 131075, 'cc832-32': 6, 'cc832-31': 5, 'cc892-240': 65594, 'cc892-321': 65552, 'cc892-308': 65563, 'lc312': 65578, 'lc312-129': 131077, 'cc892-303': 65562, 'cc892-301': 65560, 'unconfig': 0, 'cc892-202': 65545, 'cc892-201': 65544, 'cc832-41-ID': 65557, 'cc892-432': 65588, 'empty': 1, 'cc832-10-ID': 65541, 'sw892-11X': 65584, 'cc832-44-ID': 65559, 'cc892-241': 65595, 'cc832-42': 8, 'cc832-41': 7, 'cc832-44': 9, 'lc322': 65540, 'lc308-129': 131073, 'lc308': 65567, 'cc832-46A': 10, 'cc832-20': 4, 'lc303': 65566, 'cc892-211': 65550, 'cc892-212': 65551, 'cc892-214': 65548, 'cc832-20-ID': 65543, 'cc892-233': 65568, 'cc892-421': 65591, 'cc832-42-ID': 65558.
                                 fmSlotDescr 1.3.6.1.4.1.22.51.2.2.1.3 octet string read-only
Ascii string. Description of the card
                                 fmSlotInfo 1.3.6.1.4.1.22.51.2.2.1.4 octet string read-write
User general info for the slot. Can be the use of that slot, its location etc...
                                 fmSlotStatus 1.3.6.1.4.1.22.51.2.2.1.5 octet string read-only
8 bytes. 60 status bits of the card. For more information about the meaning of the status, read the specific user manual of each card. The channel leds are encoded into 2 bytes.
                                 fmSlotPrevStatus 1.3.6.1.4.1.22.51.2.2.1.6 octet string read-only
8 bytes. Previous 60 status bits of the card. This object id is used mainly for traps (see Card Trap)
                                 fmSlotRLBSet 1.3.6.1.4.1.22.51.2.2.1.7 integer read-write
Argument: 1 - 4. Perform a RLB set operation on the channel passed as argument. When reading the instance of this object the value has no meaning.
                                 fmSlotRLBClear 1.3.6.1.4.1.22.51.2.2.1.8 integer read-write
Argument: 1 - 4. Perform a RLB clear operation on the channel passed as argument. When reading the instance of this object the value has no meaning.
                                 fmSlotExpCode 1.3.6.1.4.1.22.51.2.2.1.9 integer read-write
Perform an expanded command on the slot. For expanded codes, see specific card user manual. When reading the instance of this object the value has no meaning. Extended command codes for NDS cards ------------------------------------ 1. CC892.303 (Ethernet) Code (Dec/Hex) Command ----------------------------------- 02/02 Detach Port 13 03/03 Attach Port 13 04/04 Detach Port 01 05/05 Attach Port 01 06/06 Detach Port 02 07/07 Attach Port 02 08/08 Detach Port 03 09/09 Attach Port 03 10/0A Detach Port 04 11/0B Attach Port 04 12/0C Detach Port 05 13/0D Attach Port 05 14/0E Detach Port 06 15/0F Attach Port 06 16/10 Detach Port 07 17/11 Attach Port 07 18/12 Detach Port 08 19/13 Attach Port 08 20/14 Detach Port 09 21/15 Attach Port 09 22/16 Detach Port 10 23/17 Attach Port 10 24/18 Detach Port 11 25/19 Attach Port 11 26/1A Detach Port 12 27/1B Attach Port 12 28/1C Detach All Ports 29/1D Attach All Ports 30/1E Reset Card 31/1F Link Select ====================================================== 2. CC892.308 (Ethernet) Code (Dec/Hex) Command ----------------------------------- 02/02 Detach Port 01 03/03 Attach Port 01 04/04 Detach Port 02 05/05 Attach Port 02 06/06 Detach Port 03 07/07 Attach Port 03 08/08 Detach Port 04 09/09 Attach Port 04 10/0A Detach Port 05 11/0B Attach Port 05 12/0C Detach Port 06 13/0D Attach Port 06 14/0E Detach Port 07 15/0F Attach Port 07 16/10 Detach Port 08 17/11 Attach Port 08 ... 28/1C Detach All Ports 29/1D Attach All Ports 30/1E Reset Card 31/1F Link Select ================================================ 3. CC892.322 (Token-ring) Module 323 ---------- Code (Dec/Hex) Command ----------------------------------- 02/02 Detach Port 01 03/03 Attach Port 01 04/04 Detach Port 02 05/05 Attach Port 02 06/06 Detach Port 03 07/07 Attach Port 03 08/08 Detach Port 04 09/09 Attach Port 04 10/0A Detach Port 05 11/0B Attach Port 05 12/0C Detach Port 06 13/0D Attach Port 06 18/12 Detach Port 07 19/13 Attach Port 07 20/14 Detach Port 08 21/15 Attach Port 08 22/16 Detach Port 19 23/17 Attach Port 19 24/18 Detach Port 10 25/19 Attach Port 10 26/1A Detach Port 11 27/1B Attach Port 11 28/1C Detach Port 12 29/1D Attach Port 12 30/1E Reset Card 34/22 Detach Port 13 35/23 Attach Port 13 36/24 Detach Port 14 37/25 Attach Port 14 38/26 Detach Port 15 39/27 Attach Port 15 40/28 Detach Port 16 41/29 Attach Port 16 42/2A Detach Port 17 43/2B Attach Port 17 44/2C Detach Port 18 45/2D Attach Port 18 50/32 Detach Port 19 51/33 Attach Port 19 52/34 Detach Port 20 53/35 Attach Port 20 54/36 Detach Port 21 55/37 Attach Port 21 56/38 Detach Port 22 57/39 Attach Port 22 58/3A Detach Port 23 59/3B Attach Port 23 60/3C Detach Port 24 61/3D Attach Port 24 77/4D Detach All Ports 79/4F Attach All Ports ======================================================== Module 325 ---------- 30/1E Reset Card 80/50 Detach Local Port 1 (channel 1) 81/51 Attach Local Port 1 (channel 1) 82/52 Detach Local Port 2 (channel 1) 83/53 Attach Local Port 2 (channel 1) 88/58 Detach Local Port 1 (channel 3) 89/59 Attach Local Port 1 (channel 3) 90/5A Detach Local Port 2 (channel 3) 91/5B Attach Local Port 2 (channel 3) 77/4D Detach All Ports 79/4F Attach All Ports 4. CC892.427 (Voice) Code (Dec/Hex) Command ----------------------------------- 04/04 Loopback OFF on Port 1 05/05 Loopback ON on Port 1 06/06 Loopback OFF on Port 2 07/07 Loopback ON on Port 2 08/08 Loopback OFF on Port 3 09/09 Loopback ON on Port 3 10/0A Loopback OFF on Port 4 11/0B Loopback ON on Port 4 12/0C Loopback OFF on Port 5 13/0D Loopback ON on Port 5 14/0E Loopback OFF on Port 6 15/0F Loopback ON on Port 6 16/10 Loopback OFF on Port 7 17/11 Loopback ON on Port 7 18/12 Loopback OFF on Port 8 19/13 Loopback ON on Port 8 20/14 Loopback OFF on Port 9 21/15 Loopback ON on Port 9 22/16 Loopback OFF on Port 10 23/17 Loopback ON on Port 10 24/18 Loopback OFF on Port 11 25/19 Loopback ON on Port 11 26/1A Loopback OFF on Port 12 27/1B Loopback ON on Port 12 28/1C Loopback OFF on Port 13 29/1D Loopback ON on Port 13 30/1E Loopback OFF on Port 14 31/1F Loopback ON on Port 14 32/20 Loopback OFF on Port 15 33/21 Loopback ON on Port 15 34/22 Loopback OFF on Port 16 35/23 Loopback ON on Port 16 37/25 Loopback ALL on Ports 1-8 39/27 Loopback ALL on Ports 9-16 40/28 Alternate Mode on Channel Module #1 41/29 Normal Mode on Channel Module #1 42/2A Alternate Mode on Channel Module #2 43/2B Normal Mode on Channel Module #2 45/2D Configuration Load Module #1 47/2F Configuration Load Module #2 ======================================================
                                 fmSlotTrapMask 1.3.6.1.4.1.22.51.2.2.1.10 integer read-write
When the value is 1, no more traps from that slot are sent, until next reset. (temporary mask) Enumeration: 'mask': 1, 'no-mask': 0.
                                 pfmSlotTrapMask 1.3.6.1.4.1.22.51.2.2.1.11 integer read-write
When the value is 1, no more traps for that slot will be sent, starting after next reset (permanent mask) Enumeration: 'mask': 1, 'no-mask': 0.
                                 fmSlotIpAddr 1.3.6.1.4.1.22.51.2.2.1.12 ipaddress read-only
IP address of a channel card. This is object is available only for channel cards which have their own IP addresses (e.g., LC303/129)
                     fmlu 1.3.6.1.4.1.22.51.3
                         fmLUID 1.3.6.1.4.1.22.51.3.1 integer read-write
Logic unit ID Enumeration: 'none': 1, 'lu104': 6, 'lu107': 9, 'lu106': 8, 'lu105': 7, 'unconfig': 0, 'lu103': 5, 'lu102': 4, 'lu101': 3, 'lu100': 2, 'lu108': 10.
                         fmLUDescr 1.3.6.1.4.1.22.51.3.2 octet string read-only
Ascii string. Description of the logic unit
                         fmLUStatus 1.3.6.1.4.1.22.51.3.3 octet string read-only
One byte of LU status
                         fmLULinkSelect 1.3.6.1.4.1.22.51.3.4 integer read-write
Setup LU link. Enumeration: 'sec-link': 1, 'main-link': 0.
                         fmLULoopBackSet 1.3.6.1.4.1.22.51.3.5 integer read-write
Upon writing, performs LLB command. When reading the instance of this object the value has no meaning.
                         fmLULoopBackClr 1.3.6.1.4.1.22.51.3.6 integer read-write
Upon writing, clear LLB command. When reading the instance of this object the value has no meaning.
                         fmLUTrapMask 1.3.6.1.4.1.22.51.3.7 integer read-write
When the value is 1, no more traps from the LU are sent, until next reset. (temporary mask) Enumeration: 'mask': 1, 'no-mask': 0.
                         pfmLUTrapMask 1.3.6.1.4.1.22.51.3.8 integer read-write
When the value is 1, no more traps for the LU will be sent, starting after next reset (permanent mask) Enumeration: 'mask': 1, 'no-mask': 0.
                     fmdiag 1.3.6.1.4.1.22.51.5
                         fmDiagConfig 1.3.6.1.4.1.22.51.5.1 octet string read-only
Version of the station. The version includes station type, hardware version and software version. The string can include CR and LF
                         fmDiagTrapInfo 1.3.6.1.4.1.22.51.5.2 displaystring read-only
Used for generic traps. The first word is the trap code. The rest of the string is the extra information. Contains CR and LF char.
                         fmDiagFaultTable 1.3.6.1.4.1.22.51.5.3 no-access
Table of fault reports from the agent
                             fmDiagFaultEntry 1.3.6.1.4.1.22.51.5.3.1 no-access
                                 fmDiagFaultIndex 1.3.6.1.4.1.22.51.5.3.1.1 integer read-only
The fault index in the fault table
                                 fmDiagFaultReport 1.3.6.1.4.1.22.51.5.3.1.2 displaystring read-only
Get the faults detected by the agent
                         fmDiagDebug 1.3.6.1.4.1.22.51.5.4 integer read-write
This object is for factory use only. Users must not write into this variable or improper operation can occur. Enumeration: 'normal-mode': 0, 'debug-mode': 1.
                       fmPowerSupplyFail 1.3.6.1.4.1.22.510.1
This trap message is generated as soon as one of the power supply has failed
                       fmPrimaryPowerSupplyOK 1.3.6.1.4.1.22.510.2
This trap is issued when primary power supply return to work
                       fmSecondPowerSupplyOK 1.3.6.1.4.1.22.510.3
This trap is issued when second power supply return to work
                       fmPowerSupplyChangeConfig 1.3.6.1.4.1.22.510.4
Issued when a change in the configuration of the power supply is done
                       fmLUOutOfSync 1.3.6.1.4.1.22.510.7
Issued when the Logic unit goes out of synchronization
                       fmLUReturnToSync 1.3.6.1.4.1.22.510.8
Issues as soon as the logic unit returns to synchronization
                       fmLUPassToMain 1.3.6.1.4.1.22.510.9
Issues as soon as the logic unit pass to main link
                       fmLUPassToSecond 1.3.6.1.4.1.22.510.10
Issues as soon as the logic unit pass to second link
                       fmLUPrimaryLinkFail 1.3.6.1.4.1.22.510.11
When primary link of the logic unit fails this trap is issued
                       fmLUPrimaryLinkOK 1.3.6.1.4.1.22.510.12
When primary link of the logic unit fails this trap is issued
                       fmLUSecondLinkFail 1.3.6.1.4.1.22.510.13
When second link of the logic unit fails this trap is issued
                       fmLUSecondLinkOK 1.3.6.1.4.1.22.510.14
When second link of the logic unit fails this trap is issued
                       fmLULLBOn 1.3.6.1.4.1.22.510.15
When the logic unit enters LLB mode
                       fmLULLBOff 1.3.6.1.4.1.22.510.16
When the logic unit exits LLB mode
                       fmLUChangeConfig 1.3.6.1.4.1.22.510.20
Issues when a change in the LU configuration is done
                       fmSlotTrap 1.3.6.1.4.1.22.510.25
Generated when a significant status has changed in a slot. By xoring the 2 statuses, the NMS can identify the cause of the trap.
                       fmSlotChangeConfig 1.3.6.1.4.1.22.510.26
Issued when the system detects changes in its slots configuration
                       fmDiagGenericTrap 1.3.6.1.4.1.22.510.30
Generic Trap information