EATON-EPDU-MIB: View SNMP OID List / Download MIB

VENDOR: EATON CORPORATION


 Home MIB: EATON-EPDU-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, EATON-OIDS, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 eatonEpdu 1.3.6.1.4.1.534.6.6.7
The MIB module for Eaton ePDUs (Enclosure Power Distribution Units).
     notifications 1.3.6.1.4.1.534.6.6.7.0
         notifyUserLogin 1.3.6.1.4.1.534.6.6.7.0.1
Sent whenever a user logs in.
         notifyUserLogout 1.3.6.1.4.1.534.6.6.7.0.2
Sent whenever a user logs out.
         notifyFailedLogin 1.3.6.1.4.1.534.6.6.7.0.3
Sent when someone attempts to log in and fails. On some models, may be sent after three failed login attempts.
         notifyBootUp 1.3.6.1.4.1.534.6.6.7.0.4
Sent whenever an ePDU finishes booting up (hard or soft reboot).
         notifyInputVoltageThStatus 1.3.6.1.4.1.534.6.6.7.0.11
Sent whenever an input voltage threshold status changes.
         notifyInputCurrentThStatus 1.3.6.1.4.1.534.6.6.7.0.12
Sent whenever an input current threshold status changes.
         notifyInputFrequencyStatus 1.3.6.1.4.1.534.6.6.7.0.13
Sent whenever the input frequency status changes.
         notifyGroupVoltageThStatus 1.3.6.1.4.1.534.6.6.7.0.21
Sent whenever a group voltage threshold status changes.
         notifyGroupCurrentThStatus 1.3.6.1.4.1.534.6.6.7.0.22
Sent whenever a group current threshold status changes.
         notifyGroupBreakerStatus 1.3.6.1.4.1.534.6.6.7.0.23
Sent whenever a group status changes to indicate whether the circuit breaker is on or off.
         notifyOutletVoltageThStatus 1.3.6.1.4.1.534.6.6.7.0.31
Sent whenever an outlet voltage threshold status changes.
         notifyOutletCurrentThStatus 1.3.6.1.4.1.534.6.6.7.0.32
Sent whenever an outlet current threshold status changes.
         notifyOutletControlStatus 1.3.6.1.4.1.534.6.6.7.0.33
Sent whenever an outlet state On / Off changes.
         notifyTemperatureThStatus 1.3.6.1.4.1.534.6.6.7.0.41
Sent whenever a temperature threshold status changes.
         notifyHumidityThStatus 1.3.6.1.4.1.534.6.6.7.0.42
Sent whenever a humidity threshold status changes.
         notifyContactState 1.3.6.1.4.1.534.6.6.7.0.43
Sent whenever a contact sensor state changes.
         notifyProbeStatus 1.3.6.1.4.1.534.6.6.7.0.44
Sent whenever the environment probe status changes.
         notifyCommunicationStatus 1.3.6.1.4.1.534.6.6.7.0.51
Sent whenever the PDU communication status changes.
         notifyInternalStatus 1.3.6.1.4.1.534.6.6.7.0.52
Sent whenever the PDU internal status changes.
         notifyTest 1.3.6.1.4.1.534.6.6.7.0.53
Sent whenever the trap test feature is used by the communication card.
         notifyStrappingStatus 1.3.6.1.4.1.534.6.6.7.0.54
Sent whenever the strapping communication status changes.
     units 1.3.6.1.4.1.534.6.6.7.1
         unitsPresent 1.3.6.1.4.1.534.6.6.7.1.1 displaystring read-only
Each unit is identified by a Strapping Index. This object returns a comma-delimited list of the Strapping Indexes of all units present in the strapping group. For example, if units 0, 1, 5, and 7 are present, this value will be '0,1,5,7'. For units that do not support strapping, a Strapping Index of '0' is assumed.
         unitTable 1.3.6.1.4.1.534.6.6.7.1.2 no-access
A list of units. In most cases this list will only contain one entry. However, some units have a 'strapping' feature which allow units to be daisy-chained together such that all of them can be accessed through the SNMP interface of the master. If strapping is enabled, the strapping indexes of the units that can be accessed will be listed in the unitsPresent object.
             unitEntry 1.3.6.1.4.1.534.6.6.7.1.2.1 no-access
An entry for a PDU.
                 strappingIndex 1.3.6.1.4.1.534.6.6.7.1.2.1.1 integer32 no-access
For units that support 'strapping' functionality, this will be a unique value for each unit. If units do not support 'strapping', this will always be '0'.
                 productName 1.3.6.1.4.1.534.6.6.7.1.2.1.2 octet string read-only
Name of the product.
                 partNumber 1.3.6.1.4.1.534.6.6.7.1.2.1.3 octet string read-only
Part number of the unit.
                 serialNumber 1.3.6.1.4.1.534.6.6.7.1.2.1.4 octet string read-only
Serial number of the unit.
                 firmwareVersion 1.3.6.1.4.1.534.6.6.7.1.2.1.5 octet string read-only
Firmware version.
                 unitName 1.3.6.1.4.1.534.6.6.7.1.2.1.6 octet string read-write
Descriptive name for the unit.
                 lcdControl 1.3.6.1.4.1.534.6.6.7.1.2.1.7 integer read-write
Control the local LCD. Enumeration: 'lcdScreenOff': 1, 'notApplicable': 0, 'lcdKeyLock': 2, 'lcdScreenOffAndKeyLock': 3.
                 clockValue 1.3.6.1.4.1.534.6.6.7.1.2.1.8 dateandtime read-write
Clock value. This could be from either a real-time clock (in which case it is likely writeable) or from a time server via NTP (probably read-only).
                 temperatureScale 1.3.6.1.4.1.534.6.6.7.1.2.1.9 integer read-write
Scale used to return temperature objects. Enumeration: 'fahrenheit': 1, 'celsius': 0.
                 unitType 1.3.6.1.4.1.534.6.6.7.1.2.1.10 integer read-only
Technical capabilities of the PDU. Functionality is as follows: Monitored (MI) - input and usually section/group monitoring. Advanced Monitored (AM) - input, section/group, and outlet monitoring. Switched (SW) - input and section/group monitoring, outlet switching. Managed (MA) - input, section/group, and outlet monitoring plug outlet switching. Enumeration: 'unknown': 0, 'managed': 3, 'monitored': 4, 'advancedMonitored': 2, 'switched': 1.
                 inputCount 1.3.6.1.4.1.534.6.6.7.1.2.1.20 integer32 read-only
Number of inputs on this ePDU.
                 groupCount 1.3.6.1.4.1.534.6.6.7.1.2.1.21 integer32 read-only
Number of groups on this ePDU. Groups include breakers, outlet sections, and user-defined groups.
                 outletCount 1.3.6.1.4.1.534.6.6.7.1.2.1.22 integer32 read-only
Number of outlets on this ePDU.
                 temperatureCount 1.3.6.1.4.1.534.6.6.7.1.2.1.23 integer32 read-only
Max number of temperature measurements on this ePDU.
                 humidityCount 1.3.6.1.4.1.534.6.6.7.1.2.1.24 integer32 read-only
Max number of humidity measurements on this ePDU.
                 contactCount 1.3.6.1.4.1.534.6.6.7.1.2.1.25 integer32 read-only
Max number of contact sensors on this ePDU.
                 communicationStatus 1.3.6.1.4.1.534.6.6.7.1.2.1.30 integer read-only
Status of the internal communication with the PDU. Enumeration: 'good': 0, 'communicationLost': 1.
                 internalStatus 1.3.6.1.4.1.534.6.6.7.1.2.1.31 integer read-only
Status of the internal failure inside the PDU. Enumeration: 'internalFailure': 1, 'good': 0.
                 strappingStatus 1.3.6.1.4.1.534.6.6.7.1.2.1.32 integer read-only
Status of the external communication with a strapping unit. Enumeration: 'good': 0, 'communicationLost': 1.
                 userName 1.3.6.1.4.1.534.6.6.7.1.2.1.40 octet string no-access
Username used to log into the PDU.
                 commInterface 1.3.6.1.4.1.534.6.6.7.1.2.1.41 integer no-access
Communications interface used to log into the PDU. Enumeration: 'xml': 5, 'web': 3, 'usb': 1, 'ftp': 4, 'telnet': 2, 'serial': 0.
         unitControlTable 1.3.6.1.4.1.534.6.6.7.1.3 no-access
A list of units that have controllable outlets.
             unitControlEntry 1.3.6.1.4.1.534.6.6.7.1.3.1 no-access
An entry for a PDU which has controllable outlets.
                 unitControlOffCmd 1.3.6.1.4.1.534.6.6.7.1.3.1.2 integer32 read-write
Unit-level outlet control command. Once the command is issued, outlets will turn Off. 0-n : Time in seconds until the outlet Sequence Off command is issued -1 : Cancel a pending unit-level Off command When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command. Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control commands. These will respond with an error if a command value of > 0 is written to this object.
                 unitControlOnCmd 1.3.6.1.4.1.534.6.6.7.1.3.1.3 integer32 read-write
Unit-level outlet control command. Once the command is issued, outlets will turn On according to their outletControlSequenceDelay value. 0-n : Time in seconds until the outlet Sequence On command is issued -1 : Cancel a pending unit-level On command When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command. Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control commands. These will respond with an error if a command value of > 0 is written to this object.
     inputs 1.3.6.1.4.1.534.6.6.7.3
         inputTable 1.3.6.1.4.1.534.6.6.7.3.1 no-access
List of inputs to the PDU.
             inputEntry 1.3.6.1.4.1.534.6.6.7.3.1.1 no-access
An entry for a particular input.
                 inputIndex 1.3.6.1.4.1.534.6.6.7.3.1.1.1 integer32 no-access
A unique value for each input. Its value ranges from 1 to inputCount.
                 inputType 1.3.6.1.4.1.534.6.6.7.3.1.1.2 integer read-only
Type of input - single phase, split phase, three phase delta, or three phase wye. Enumeration: 'singlePhase': 1, 'threePhaseWye': 4, 'threePhaseDelta': 3, 'splitPhase': 2.
                 inputFrequency 1.3.6.1.4.1.534.6.6.7.3.1.1.3 integer32 read-only
Units are 0.1 Hz; divide by ten to get Hz.
                 inputFrequencyStatus 1.3.6.1.4.1.534.6.6.7.3.1.1.4 integer read-only
Status of the measured input frequency relative to the nominal frequency and the admitted tolerance. Enumeration: 'good': 0, 'outOfRange': 1.
                 inputVoltageCount 1.3.6.1.4.1.534.6.6.7.3.1.1.5 integer32 read-only
Number of input voltage measurements on this ePDU.
                 inputCurrentCount 1.3.6.1.4.1.534.6.6.7.3.1.1.6 integer32 read-only
Number of input current measurements on this ePDU.
                 inputPowerCount 1.3.6.1.4.1.534.6.6.7.3.1.1.7 integer32 read-only
Number of rows in the inputPowerTable.
                 inputPlugType 1.3.6.1.4.1.534.6.6.7.3.1.1.8 integer read-only
Identifies which plug is on the input. Enumeration: 'nemaL1430': 202, 'nemaL2230': 326, 'nemaL1530': 322, 'nema515': 120, 'iecC14Inlet': 101, 'iecC20Plug': 107, 'nemaL520': 123, 'iec516P6': 301, 'nemaL2130': 323, 'nemaL615': 125, 'nemaL630': 129, 'iecC14Plug': 106, 'bladeUps400V': 351, 'other2Phase': 200, 'iec563P6': 306, 'schuko': 151, 'nema615': 124, 'iec532P6': 304, 'iecC20Inlet': 102, 'nemaL2220': 325, 'nema520': 122, 'nemaL530': 126, 'nemaL1520': 320, 'french': 150, 'nemaL1420': 201, 'nemaL620': 128, 'iec360P6': 105, 'iec560P9': 303, 'nemaL515': 121, 'bladeUps208V': 350, 'nemaL2120': 321, 'other1Phase': 100, 'cs8265': 130, 'other3Phase': 300, 'iec316P6': 103, 'nema620': 127, 'iec332P6': 104, 'uk': 152, 'iec460P9': 302, 'cs8365': 324.
         inputVoltageTable 1.3.6.1.4.1.534.6.6.7.3.2 no-access
A list of input voltage measurements. The number of entries is given by inputVoltageCount.
             inputVoltageEntry 1.3.6.1.4.1.534.6.6.7.3.2.1 no-access
An entry for a particular input voltage measurement.
                 inputVoltageIndex 1.3.6.1.4.1.534.6.6.7.3.2.1.1 integer32 no-access
A unique value for each input voltage measurement. Its value ranges from 1 to inputVoltageCount.
                 inputVoltageMeasType 1.3.6.1.4.1.534.6.6.7.3.2.1.2 integer read-only
Value indicates what input voltage is being measured in this table row - single phase voltage, phase 1 to neutral, phase 2 to neutral, phase 3 to neutral, phase 1 to phase 2, phase 2 to phase 3, or phase 3 to phase 1. Enumeration: 'phase2to3': 6, 'phase1to2': 5, 'phase3to1': 7, 'phase1toN': 2, 'phase3toN': 4, 'singlePhase': 1, 'phase2toN': 3.
                 inputVoltage 1.3.6.1.4.1.534.6.6.7.3.2.1.3 integer32 read-only
An input voltage measurement value. Units are millivolts.
                 inputVoltageThStatus 1.3.6.1.4.1.534.6.6.7.3.2.1.4 integer read-only
Status of the measured input voltage relative to the configured thresholds. Enumeration: 'lowWarning': 1, 'highWarning': 3, 'good': 0, 'highCritical': 4, 'lowCritical': 2.
                 inputVoltageThLowerWarning 1.3.6.1.4.1.534.6.6.7.3.2.1.5 integer32 read-write
Lower warning threshold. Units are millivolts. A negative value indicates that this object is not available.
                 inputVoltageThLowerCritical 1.3.6.1.4.1.534.6.6.7.3.2.1.6 integer32 read-write
Lower critical threshold. Units are millivolts. A negative value indicates that this object is not available.
                 inputVoltageThUpperWarning 1.3.6.1.4.1.534.6.6.7.3.2.1.7 integer32 read-write
Upper warning threshold. Units are millivolts. A negative value indicates that this object is not available.
                 inputVoltageThUpperCritical 1.3.6.1.4.1.534.6.6.7.3.2.1.8 integer32 read-write
Upper critical threshold. Units are millivolts. A negative value indicates that this object is not available.
         inputCurrentTable 1.3.6.1.4.1.534.6.6.7.3.3 no-access
A list of input current measurements. The number of entries is given by inputCurrentCount.
             inputCurrentEntry 1.3.6.1.4.1.534.6.6.7.3.3.1 no-access
An entry for a particular input current measurement.
                 inputCurrentIndex 1.3.6.1.4.1.534.6.6.7.3.3.1.1 integer32 no-access
A unique value for each input current measurement. Its value ranges from 1 to inputCurrentCount.
                 inputCurrentMeasType 1.3.6.1.4.1.534.6.6.7.3.3.1.2 integer read-only
Which input wire is being measured in this table row - single phase, neutral, phase 1, phase 2, or phase 3. Enumeration: 'phase1': 3, 'phase3': 5, 'singlePhase': 1, 'phase2': 4, 'neutral': 2.
                 inputCurrentCapacity 1.3.6.1.4.1.534.6.6.7.3.3.1.3 integer32 read-only
Rated current capacity of the input. A negative value indicates that the hardware current capacity is unknown. Units are milliamps.
                 inputCurrent 1.3.6.1.4.1.534.6.6.7.3.3.1.4 integer32 read-only
An input current measurement value. Units are milliamps.
                 inputCurrentThStatus 1.3.6.1.4.1.534.6.6.7.3.3.1.5 integer read-only
Status of the measured input current relative to the configured thresholds. Enumeration: 'lowWarning': 1, 'highWarning': 3, 'good': 0, 'highCritical': 4, 'lowCritical': 2.
                 inputCurrentThLowerWarning 1.3.6.1.4.1.534.6.6.7.3.3.1.6 integer32 read-write
Lower warning threshold. Units are milliamps. A negative value indicates that this object is not available.
                 inputCurrentThLowerCritical 1.3.6.1.4.1.534.6.6.7.3.3.1.7 integer32 read-write
Lower critical threshold. Units are milliamps. A negative value indicates that this object is not available.
                 inputCurrentThUpperWarning 1.3.6.1.4.1.534.6.6.7.3.3.1.8 integer32 read-write
Upper warning threshold. Units are milliamps. A negative value indicates that this object is not available.
                 inputCurrentThUpperCritical 1.3.6.1.4.1.534.6.6.7.3.3.1.9 integer32 read-write
Upper critical threshold. Units are milliamps. A negative value indicates that this object is not available.
                 inputCurrentCrestFactor 1.3.6.1.4.1.534.6.6.7.3.3.1.10 integer32 read-only
Current crest factor. Units are in milli, for example a crest factor of 1.414 will be returned as 1414. A negative value indicates that this object is not available.
                 inputCurrentPercentLoad 1.3.6.1.4.1.534.6.6.7.3.3.1.11 integer32 read-only
Current percent load, based on the rated current capacity. Units are percentage, for example 80% will be returned as 80. A negative value indicates that this object is not available.
         inputPowerTable 1.3.6.1.4.1.534.6.6.7.3.4 no-access
A list of input power measurements. The number of entries is given by inputPowerCount.
             inputPowerEntry 1.3.6.1.4.1.534.6.6.7.3.4.1 no-access
An entry for an input power measurement.
                 inputPowerIndex 1.3.6.1.4.1.534.6.6.7.3.4.1.1 integer32 no-access
A unique value for each input power measurement. Its value ranges from 1 to inputPowerCount.
                 inputPowerMeasType 1.3.6.1.4.1.534.6.6.7.3.4.1.2 integer read-only
Value indicates what is being measured in this table row. Enumeration: 'phase1': 1, 'unknown': 0, 'phase3': 3, 'phase2': 2, 'total': 4.
                 inputVA 1.3.6.1.4.1.534.6.6.7.3.4.1.3 integer32 read-only
An input VA value. Units are VA. A negative value indicates that this object is not available.
                 inputWatts 1.3.6.1.4.1.534.6.6.7.3.4.1.4 integer32 read-only
An input Watts value. Units are Watts. A negative value indicates that this object is not available.
                 inputWh 1.3.6.1.4.1.534.6.6.7.3.4.1.5 unsigned32 read-write
Units are Watt-hours. This object is writable so that it can be reset to 0. When it is written to, the inputWhTimer will be reset updated as well.
                 inputWhTimer 1.3.6.1.4.1.534.6.6.7.3.4.1.6 unixtimestamp read-only
Timestamp of when input Watt-hours (inputWh) was last reset.
                 inputPowerFactor 1.3.6.1.4.1.534.6.6.7.3.4.1.7 integer32 read-only
An input PF value. Units are in thousandths, for example a power factor of 0.958 would be returned as 958, and 0.92 would be returned as 920. A negative value indicates that this object is not available.
                 inputVAR 1.3.6.1.4.1.534.6.6.7.3.4.1.8 integer32 read-only
An input VAR value. Units are VAR. A negative value indicates that this object is not available.
         inputTotalPowerTable 1.3.6.1.4.1.534.6.6.7.3.5 no-access
A list of total input power measurements.
             inputTotalPowerEntry 1.3.6.1.4.1.534.6.6.7.3.5.1 no-access
An entry for a total input power measurement.
                 inputTotalVA 1.3.6.1.4.1.534.6.6.7.3.5.1.3 integer32 read-only
An input VA value. Units are VA. A negative value indicates that this object is not available.
                 inputTotalWatts 1.3.6.1.4.1.534.6.6.7.3.5.1.4 integer32 read-only
An input Watts value. Units are Watts. A negative value indicates that this object is not available.
                 inputTotalWh 1.3.6.1.4.1.534.6.6.7.3.5.1.5 unsigned32 read-write
Units are Watt-hours. This object is writable so that it can be reset to 0. When it is written to, the inputWhTimer will be reset updated as well.
                 inputTotalWhTimer 1.3.6.1.4.1.534.6.6.7.3.5.1.6 unixtimestamp read-only
Timestamp of when input Watt-hours (inputWh) was last reset.
                 inputTotalPowerFactor 1.3.6.1.4.1.534.6.6.7.3.5.1.7 integer32 read-only
An input PF value. Units are in thousandths, for example a power factor of 0.958 would be returned as 958, and 0.92 would be returned as 920. A negative value indicates that this object is not available.
                 inputTotalVAR 1.3.6.1.4.1.534.6.6.7.3.5.1.8 integer32 read-only
An input VAR value. Units are VAR. A negative value indicates that this object is not available.
     groups 1.3.6.1.4.1.534.6.6.7.5
         groupTable 1.3.6.1.4.1.534.6.6.7.5.1 no-access
A list of groups. The number of entries is given by groupCount.
             groupEntry 1.3.6.1.4.1.534.6.6.7.5.1.1 no-access
An entry for a particular group.
                 groupIndex 1.3.6.1.4.1.534.6.6.7.5.1.1.1 integer32 no-access
A unique value for each group. Its value ranges from 1 to groupCount.
                 groupID 1.3.6.1.4.1.534.6.6.7.5.1.1.2 displaystring read-only
Alphanumeric designator for the group. This value may be written on the face of the unit.
                 groupName 1.3.6.1.4.1.534.6.6.7.5.1.1.3 octet string read-write
A descriptive name for the group.
                 groupType 1.3.6.1.4.1.534.6.6.7.5.1.1.4 integer read-only
The type of the group. Enumeration: 'outletSection': 4, 'userDefined': 5, 'unknown': 0, 'breaker1pole': 1, 'breaker2pole': 2, 'breaker3pole': 3.
                 groupBreakerStatus 1.3.6.1.4.1.534.6.6.7.5.1.1.5 integer read-only
Only applicable to breaker-groups. Indicates whether a breaker is turned off or on. Enumeration: 'notApplicable': 0, 'breakerOn': 1, 'breakerOff': 2.
                 groupChildCount 1.3.6.1.4.1.534.6.6.7.5.1.1.6 integer32 read-only
Number of children for this group.
         groupChildTable 1.3.6.1.4.1.534.6.6.7.5.2 no-access
A list of children for this group. For example, this table will link to all of the outlets that are contained in a particular group.
             groupChildEntry 1.3.6.1.4.1.534.6.6.7.5.2.1 no-access
An entry for a particular child.
                 groupChildIndex 1.3.6.1.4.1.534.6.6.7.5.2.1.1 integer32 no-access
A unique value for each child. Its value ranges from 1 to groupChildCount.
                 groupChildType 1.3.6.1.4.1.534.6.6.7.5.2.1.2 integer read-only
The type of the child. Enumeration: 'unknown': 0, 'section': 2, 'outlet': 4, 'custom': 3.
                 groupChildOID 1.3.6.1.4.1.534.6.6.7.5.2.1.3 object identifier read-only
Object ID of a child object.
         groupVoltageTable 1.3.6.1.4.1.534.6.6.7.5.3 no-access
A list of group voltage measurements. There can be only one voltage measurement for each group.
             groupVoltageEntry 1.3.6.1.4.1.534.6.6.7.5.3.1 no-access
An entry for a group voltage measurement.
                 groupVoltageMeasType 1.3.6.1.4.1.534.6.6.7.5.3.1.2 integer read-only
Value indicates what voltage is being measured in this table row. Enumeration: 'phase2to3': 6, 'unknown': 0, 'phase1to2': 5, 'phase3to1': 7, 'phase1toN': 2, 'phase3toN': 4, 'singlePhase': 1, 'phase2toN': 3.
                 groupVoltage 1.3.6.1.4.1.534.6.6.7.5.3.1.3 integer32 read-only
Units are millivolts.
                 groupVoltageThStatus 1.3.6.1.4.1.534.6.6.7.5.3.1.4 integer read-only
Status of the measured group voltage relative to the configured thresholds. Enumeration: 'lowWarning': 1, 'highWarning': 3, 'good': 0, 'highCritical': 4, 'lowCritical': 2.
                 groupVoltageThLowerWarning 1.3.6.1.4.1.534.6.6.7.5.3.1.5 integer32 read-write
Lower warning threshold. Units are millivolts. A negative value indicates that this object is not available.
                 groupVoltageThLowerCritical 1.3.6.1.4.1.534.6.6.7.5.3.1.6 integer32 read-write
Lower critical threshold. Units are millivolts. A negative value indicates that this object is not available.
                 groupVoltageThUpperWarning 1.3.6.1.4.1.534.6.6.7.5.3.1.7 integer32 read-write
Upper warning threshold. Units are millivolts. A negative value indicates that this object is not available.
                 groupVoltageThUpperCritical 1.3.6.1.4.1.534.6.6.7.5.3.1.8 integer32 read-write
Upper critical threshold. Units are millivolts. A negative value indicates that this object is not available.
         groupCurrentTable 1.3.6.1.4.1.534.6.6.7.5.4 no-access
A list of group current measurements. There can be only one current measurement for each group.
             groupCurrentEntry 1.3.6.1.4.1.534.6.6.7.5.4.1 no-access
An entry for a group current measurement.
                 groupCurrentCapacity 1.3.6.1.4.1.534.6.6.7.5.4.1.2 integer32 read-only
Rated current capacity of the group. Units are milliamps. A negative value indicates that the hardware current capacity is unknown (it will always be unknown for custom groups).
                 groupCurrent 1.3.6.1.4.1.534.6.6.7.5.4.1.3 integer32 read-only
A group current measurement value. Units are milliamps.
                 groupCurrentThStatus 1.3.6.1.4.1.534.6.6.7.5.4.1.4 integer read-only
Status of the measured group current relative to the configured thresholds. Enumeration: 'lowWarning': 1, 'highWarning': 3, 'good': 0, 'highCritical': 4, 'lowCritical': 2.
                 groupCurrentThLowerWarning 1.3.6.1.4.1.534.6.6.7.5.4.1.5 integer32 read-write
Lower warning threshold. Units are milliamps. A negative value indicates that this object is not available.
                 groupCurrentThLowerCritical 1.3.6.1.4.1.534.6.6.7.5.4.1.6 integer32 read-write
Lower critical threshold. Units are milliamps. A negative value indicates that this object is not available.
                 groupCurrentThUpperWarning 1.3.6.1.4.1.534.6.6.7.5.4.1.7 integer32 read-write
Upper warning threshold. Units are milliamps. A negative value indicates that this object is not available.
                 groupCurrentThUpperCritical 1.3.6.1.4.1.534.6.6.7.5.4.1.8 integer32 read-write
Upper critical threshold. Units are milliamps. A negative value indicates that this object is not available.
                 groupCurrentCrestFactor 1.3.6.1.4.1.534.6.6.7.5.4.1.9 integer32 read-only
Current crest factor. Units are in milli, for example a crest factor of 1.414 will be returned as 1414. A negative value indicates that this object is not available.
                 groupCurrentPercentLoad 1.3.6.1.4.1.534.6.6.7.5.4.1.10 integer32 read-only
Current percent load, based on the rated current capacity. Units are percentage, for example 80% will be returned as 80. A negative value indicates that this object is not available.
         groupPowerTable 1.3.6.1.4.1.534.6.6.7.5.5 no-access
A list of group power measurements. There can be only one power measurement for each group.
             groupPowerEntry 1.3.6.1.4.1.534.6.6.7.5.5.1 no-access
An entry for a group power measurement.
                 groupVA 1.3.6.1.4.1.534.6.6.7.5.5.1.2 integer32 read-only
A group VA value. Units are VA. A negative value indicates that this object is not available.
                 groupWatts 1.3.6.1.4.1.534.6.6.7.5.5.1.3 integer32 read-only
A group Watts value. Units are Watts. A negative value indicates that this object is not available.
                 groupWh 1.3.6.1.4.1.534.6.6.7.5.5.1.4 unsigned32 read-write
Units are Watt-hours. This object is writable so that it can be reset to 0. When it is written to, the inputWhTotalTimer will be reset to 0 as well.
                 groupWhTimer 1.3.6.1.4.1.534.6.6.7.5.5.1.5 unixtimestamp read-only
Timestamp of when group Watt-hours (groupWh) was last reset.
                 groupPowerFactor 1.3.6.1.4.1.534.6.6.7.5.5.1.6 integer32 read-only
A group PF value. Units are in thousandths, for example a power factor of 0.958 would be returned as 958, and 0.92 would be returned as 920. A negative value indicates that this object is not available.
                 groupVAR 1.3.6.1.4.1.534.6.6.7.5.5.1.7 integer32 read-only
A group VAR value. Units are VAR. A negative value indicates that this object is not available.
         groupControlTable 1.3.6.1.4.1.534.6.6.7.5.6 no-access
A list of controllable groups.
             groupControlEntry 1.3.6.1.4.1.534.6.6.7.5.6.1 no-access
An entry for a controllable group.
                 groupControlStatus 1.3.6.1.4.1.534.6.6.7.5.6.1.2 integer read-only
Current state of a controlled group. A value of 'mixed' means that that the outlets within the group have differing states. Enumeration: 'mixed': 3, 'on': 1, 'off': 0, 'rebooting': 2.
                 groupControlOffCmd 1.3.6.1.4.1.534.6.6.7.5.6.1.3 integer32 read-write
Group-level outlet control command. Once the command is issued, the outlets in the group will turn Off immediately. 0-n : Time in seconds until the group command is issued -1 : Cancel a pending group-level Off command When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command. Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control commands. These will respond with an error if a command value of > 0 is written to this object.
                 groupControl0nCmd 1.3.6.1.4.1.534.6.6.7.5.6.1.4 integer32 read-write
Group-level outlet control command. Once the command is issued, the outlets in the group will turn On immediately. 0-n : Time in seconds until the group command is issued -1 : Cancel a pending group-level On command When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command. Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control commands. These will respond with an error if a command value of > 0 is written to this object.
                 groupControlRebootCmd 1.3.6.1.4.1.534.6.6.7.5.6.1.5 integer32 read-write
Group-level outlet control command. For outlets that are On prior to the Reboot command, they will switch Off immediately when the command is issued, remain Off for outletControlRebootOffTime seconds, and then turn back On. For outlets that are Off prior to the Reboot command, they will turn On after a delay of outletControlRebootOffTime seconds from when the command is issued. 0-n : Time in seconds until the Reboot command is issued -1 : Cancel a pending group-level Reboot command When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command. Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control commands. These will respond with an error if a command value of > 0 is written to this object.
     outlets 1.3.6.1.4.1.534.6.6.7.6
         outletTable 1.3.6.1.4.1.534.6.6.7.6.1 no-access
A list of outlets. The number of entries is given by outletCount.
             outletEntry 1.3.6.1.4.1.534.6.6.7.6.1.1 no-access
An entry for a particular outlet.
                 outletIndex 1.3.6.1.4.1.534.6.6.7.6.1.1.1 integer32 no-access
A unique value for each outlet. its value ranges from 1 to outletCount.
                 outletID 1.3.6.1.4.1.534.6.6.7.6.1.1.2 displaystring read-only
Alphanumeric designator for the outlet.
                 outletName 1.3.6.1.4.1.534.6.6.7.6.1.1.3 octet string read-write
A descriptive name for the outlet.
                 outletParentCount 1.3.6.1.4.1.534.6.6.7.6.1.1.4 integer32 read-only
Number of parents for this outlet.
                 outletType 1.3.6.1.4.1.534.6.6.7.6.1.1.5 integer read-only
The physical type of outlet. Enumeration: 'nemaL715': 29, 'iecC19': 2, 'nemaL520': 23, 'nema520': 22, 'unknown': 0, 'nema515': 20, 'rf203p277': 30, 'french': 11, 'nema620': 26, 'nemaL620': 27, 'schuko': 12, 'iecC13': 1, 'uk': 10, 'nemaL530': 24, 'nema615': 25, 'nema51520': 21, 'nemaL630': 28.
         outletParentTable 1.3.6.1.4.1.534.6.6.7.6.2 no-access
A list of parents for this outlet. For example, this table will link to all of the groups that have this outlet as a child.
             outletParentEntry 1.3.6.1.4.1.534.6.6.7.6.2.1 no-access
An entry for a particular parent.
                 outletParentIndex 1.3.6.1.4.1.534.6.6.7.6.2.1.1 integer32 no-access
A unique value for each parent. Its value ranges from 1 to outletParentCount.
                 outletParentType 1.3.6.1.4.1.534.6.6.7.6.2.1.2 integer read-only
The type of the parent. Enumeration: 'unknown': 0, 'section': 2, 'breaker': 1, 'custom': 3.
                 outletParentOID 1.3.6.1.4.1.534.6.6.7.6.2.1.3 object identifier read-only
Object ID of a parent object.
         outletVoltageTable 1.3.6.1.4.1.534.6.6.7.6.3 no-access
A list of outlet voltage measurements.
             outletVoltageEntry 1.3.6.1.4.1.534.6.6.7.6.3.1 no-access
An entry for an outlet voltage measurement.
                 outletVoltage 1.3.6.1.4.1.534.6.6.7.6.3.1.2 integer32 read-only
Units are millivolts.
                 outletVoltageThStatus 1.3.6.1.4.1.534.6.6.7.6.3.1.3 integer read-only
Status of the measured outlet voltage relative to the configured thresholds. Enumeration: 'lowWarning': 1, 'highWarning': 3, 'good': 0, 'highCritical': 4, 'lowCritical': 2.
                 outletVoltageThLowerWarning 1.3.6.1.4.1.534.6.6.7.6.3.1.4 integer32 read-write
Lower warning threshold. Units are millivolts. A negative value indicates that this object is not available.
                 outletVoltageThLowerCritical 1.3.6.1.4.1.534.6.6.7.6.3.1.5 integer32 read-write
Lower critical threshold. Units are millivolts. A negative value indicates that this object is not available.
                 outletVoltageThUpperWarning 1.3.6.1.4.1.534.6.6.7.6.3.1.6 integer32 read-write
Upper warning threshold. Units are millivolts. A negative value indicates that this object is not available.
                 outletVoltageThUpperCritical 1.3.6.1.4.1.534.6.6.7.6.3.1.7 integer32 read-write
Upper critical threshold. Units are millivolts. A negative value indicates that this object is not available.
         outletCurrentTable 1.3.6.1.4.1.534.6.6.7.6.4 no-access
A list of outlet current measurements.
             outletCurrentEntry 1.3.6.1.4.1.534.6.6.7.6.4.1 no-access
An entry for an outlet current measurement.
                 outletCurrentCapacity 1.3.6.1.4.1.534.6.6.7.6.4.1.2 integer32 read-only
Rated current capacity of the outlet. Units are milliamps. A negative value indicates that the hardware current capacity is unknown.
                 outletCurrent 1.3.6.1.4.1.534.6.6.7.6.4.1.3 integer32 read-only
An outlet current measurement value. Units are milliamps.
                 outletCurrentThStatus 1.3.6.1.4.1.534.6.6.7.6.4.1.4 integer read-only
Status of the measured outlet current relative to the configured thresholds. Enumeration: 'lowWarning': 1, 'highWarning': 3, 'good': 0, 'highCritical': 4, 'lowCritical': 2.
                 outletCurrentThLowerWarning 1.3.6.1.4.1.534.6.6.7.6.4.1.5 integer32 read-write
Lower warning threshold. Units are milliamps. A negative value indicates that this object is not available.
                 outletCurrentThLowerCritical 1.3.6.1.4.1.534.6.6.7.6.4.1.6 integer32 read-write
Lower critical threshold. Units are milliamps. A negative value indicates that this object is not available.
                 outletCurrentThUpperWarning 1.3.6.1.4.1.534.6.6.7.6.4.1.7 integer32 read-write
Upper warning threshold. Units are milliamps. A negative value indicates that this object is not available.
                 outletCurrentThUpperCritical 1.3.6.1.4.1.534.6.6.7.6.4.1.8 integer32 read-write
Upper critical threshold. Units are milliamps. A negative value indicates that this object is not available.
                 outletCurrentCrestFactor 1.3.6.1.4.1.534.6.6.7.6.4.1.9 integer32 read-only
Current crest factor. Units are in milli, for example a crest factor of 1.414 will be returned as 1414. A negative value indicates that this object is not available.
                 outletCurrentPercentLoad 1.3.6.1.4.1.534.6.6.7.6.4.1.10 integer32 read-only
Current percent load, based on the rated current capacity. Units are percentage, for example 80% will be returned as 80. A negative value indicates that this object is not available.
         outletPowerTable 1.3.6.1.4.1.534.6.6.7.6.5 no-access
A list of outlet power measurements.
             outletPowerEntry 1.3.6.1.4.1.534.6.6.7.6.5.1 no-access
An entry for an outlet power measurement.
                 outletVA 1.3.6.1.4.1.534.6.6.7.6.5.1.2 integer32 read-only
An outlet VA value. Units are VA. A negative value indicates that this object is not available.
                 outletWatts 1.3.6.1.4.1.534.6.6.7.6.5.1.3 integer32 read-only
An outlet Watts value. Units are Watts. A negative value indicates that this object is not available.
                 outletWh 1.3.6.1.4.1.534.6.6.7.6.5.1.4 unsigned32 read-write
Units are Watt-hours. This object is writable so that it can be reset to 0. When it is written to, the inputWhTotalTimer will be reset to 0 as well.
                 outletWhTimer 1.3.6.1.4.1.534.6.6.7.6.5.1.5 unixtimestamp read-only
Timestamp of when outlet Watt-hours (outletWh) was last reset.
                 outletPowerFactor 1.3.6.1.4.1.534.6.6.7.6.5.1.6 integer32 read-only
An outlet PF value. Units are in thousandths, for example a power factor of 0.958 would be returned as 958, and 0.92 would be returned as 920. A negative value indicates that this object is not available.
                 outletVAR 1.3.6.1.4.1.534.6.6.7.6.5.1.7 integer32 read-only
An outlet VAR value. Units are VAR. A negative value indicates that this object is not available.
         outletControlTable 1.3.6.1.4.1.534.6.6.7.6.6 no-access
A list of controllable outlets.
             outletControlEntry 1.3.6.1.4.1.534.6.6.7.6.6.1 no-access
An entry for a controllable outlet.
                 outletControlStatus 1.3.6.1.4.1.534.6.6.7.6.6.1.2 integer read-only
Current state of a controlled outlet. Enumeration: 'on': 1, 'pendingOff': 2, 'pendingOn': 3, 'off': 0.
                 outletControlOffCmd 1.3.6.1.4.1.534.6.6.7.6.6.1.3 integer32 read-write
Outlet control command. Once the command is issued, the outlet will turn Off immediately. 0-n : Time in seconds until the outlet command is issued -1 : Cancel a pending outlet Off command When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command. Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control commands. These will respond with an error if a command value of > 0 is written to this object.
                 outletControlOnCmd 1.3.6.1.4.1.534.6.6.7.6.6.1.4 integer32 read-write
Outlet control command. Once the command is issued, the outlet will turn On immediately. 0-n : Time in seconds until the outlet command is issued -1 : Cancel a pending outlet On command When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command. Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control commands. These will respond with an error if a command value of > 0 is written to this object.
                 outletControlRebootCmd 1.3.6.1.4.1.534.6.6.7.6.6.1.5 integer32 read-write
Outlet control command. For outlets that are On prior to this Reboot command, they will switch Off immediately when the command is issued, remain Off for outletControlRebootOffTime seconds, and then turn back On. For outlets that are Off prior to the Reboot command, they will turn On after a delay of outletControlRebootOffTime seconds from when the command is issued. 0-n : Time in seconds until the Reboot command is issued -1 : Cancel a pending outlet Reboot command When read, returns -1 if no command is pending, or the current downcount in seconds of a pending command. Certain ePDUs (mainly those with part numbers beginning with IPV or IPC) do not support delayed control commands. These will respond with an error if a command value of > 0 is written to this object.
                 outletControlPowerOnState 1.3.6.1.4.1.534.6.6.7.6.6.1.6 integer read-write
Determines the outlet state when power is applied to the unit. 0 : not restart at device startup 1 : should sequence back ON in line with outletControlSequenceTime 2 : should take the state the outlet had when power was lost. If the state was ON, should sequence back ON in line with outletControlSequenceTime. Enumeration: 'on': 1, 'off': 0, 'lastState': 2.
                 outletControlSequenceDelay 1.3.6.1.4.1.534.6.6.7.6.6.1.7 integer32 read-write
Time delay in seconds from when a Global Sequence On command is issued to when the command is executed on this outlet. This delay is also used as a power-on delay. Set to -1 to exclude this outlet from Global Sequence On commands.
                 outletControlRebootOffTime 1.3.6.1.4.1.534.6.6.7.6.6.1.8 integer32 read-write
Time delay in seconds that the outlet should remain in the Off state when executing a Reboot command.
                 outletControlSwitchable 1.3.6.1.4.1.534.6.6.7.6.6.1.9 integer read-write
Determines the outlet capability to be controlled On/Off from the communication channels. 1 : control On/Off enabled 2 : control On/Off disabled. Enumeration: 'notSwitchable': 2, 'switchable': 1.
                 outletControlShutoffDelay 1.3.6.1.4.1.534.6.6.7.6.6.1.10 integer32 read-write
Time delay in seconds that could be taken in account before shutting of the outlet. An application which need to shutoff properly an outlet will read this parameter first then write it to the command outletControlOffCmd.
     environmental 1.3.6.1.4.1.534.6.6.7.7
         temperatureTable 1.3.6.1.4.1.534.6.6.7.7.1 no-access
A list of temperature probe measurements. The number of entries is given by temperatureCount.
             temperatureEntry 1.3.6.1.4.1.534.6.6.7.7.1.1 no-access
An entry for a temperature measurement.
                 temperatureIndex 1.3.6.1.4.1.534.6.6.7.7.1.1.1 integer32 no-access
A unique value for each temperature probe measurement. Its value ranges from 1 to temperatureCount.
                 temperatureName 1.3.6.1.4.1.534.6.6.7.7.1.1.2 octet string read-write
A descriptive name for the temperature probe.
                 temperatureProbeStatus 1.3.6.1.4.1.534.6.6.7.7.1.1.3 integer read-only
Indicates whether a probe is connected or not. Enumeration: 'bad': -1, 'connected': 1, 'disconnected': 0.
                 temperatureValue 1.3.6.1.4.1.534.6.6.7.7.1.1.4 integer32 read-only
Units are in tenths of a degree according to the scale specified by temperatureScale (either Fahrenheit or Celsius). Divide by ten to get degrees.
                 temperatureThStatus 1.3.6.1.4.1.534.6.6.7.7.1.1.5 integer read-only
Status of the measured temperature relative to the configured thresholds. Enumeration: 'lowWarning': 1, 'highWarning': 3, 'good': 0, 'highCritical': 4, 'lowCritical': 2.
                 temperatureThLowerWarning 1.3.6.1.4.1.534.6.6.7.7.1.1.6 integer32 read-write
Lower warning threshold. Units are tenths of a degree. A negative value indicates that this object is not available.
                 temperatureThLowerCritical 1.3.6.1.4.1.534.6.6.7.7.1.1.7 integer32 read-write
Lower critical threshold. Units are tenths of a degree. A negative value indicates that this object is not available.
                 temperatureThUpperWarning 1.3.6.1.4.1.534.6.6.7.7.1.1.8 integer32 read-write
Upper warning threshold. Units are tenths of a degree. A negative value indicates that this object is not available.
                 temperatureThUpperCritical 1.3.6.1.4.1.534.6.6.7.7.1.1.9 integer32 read-write
Upper critical threshold. Units are tenths of a degree. A negative value indicates that this object is not available.
         humidityTable 1.3.6.1.4.1.534.6.6.7.7.2 no-access
A list of humidity probe measurements. The number of entries is given by humidityCount.
             humidityEntry 1.3.6.1.4.1.534.6.6.7.7.2.1 no-access
An entry for a humidity measurement.
                 humidityIndex 1.3.6.1.4.1.534.6.6.7.7.2.1.1 integer32 no-access
A unique value for each humidity probe measurement. Its value ranges from 1 to humidityCount.
                 humidityName 1.3.6.1.4.1.534.6.6.7.7.2.1.2 octet string read-write
A descriptive name for the humidity probe.
                 humidityProbeStatus 1.3.6.1.4.1.534.6.6.7.7.2.1.3 integer read-only
Indicates whether a probe is connected or not. Enumeration: 'bad': -1, 'connected': 1, 'disconnected': 0.
                 humidityValue 1.3.6.1.4.1.534.6.6.7.7.2.1.4 integer32 read-only
Units are tenths of a percent relative humidity. Divide the value by 10 to get %RH.
                 humidityThStatus 1.3.6.1.4.1.534.6.6.7.7.2.1.5 integer read-only
Status of the measured humidity relative to the configured thresholds. Enumeration: 'lowWarning': 1, 'highWarning': 3, 'good': 0, 'highCritical': 4, 'lowCritical': 2.
                 humidityThLowerWarning 1.3.6.1.4.1.534.6.6.7.7.2.1.6 integer32 read-write
Lower warning threshold. Units are 0.1 %RH. A negative value indicates that this object is not available.
                 humidityThLowerCritical 1.3.6.1.4.1.534.6.6.7.7.2.1.7 integer32 read-write
Lower critical threshold. Units are 0.1 %RH. A negative value indicates that this object is not available.
                 humidityThUpperWarning 1.3.6.1.4.1.534.6.6.7.7.2.1.8 integer32 read-write
Upper warning threshold. Units are 0.1 %RH. A negative value indicates that this object is not available.
                 humidityThUpperCritical 1.3.6.1.4.1.534.6.6.7.7.2.1.9 integer32 read-write
Upper critical threshold. Units are 0.1 %RH. A negative value indicates that this object is not available.
         contactTable 1.3.6.1.4.1.534.6.6.7.7.3 no-access
A list of contact sensors. The number of entries is given by contactCount.
             contactEntry 1.3.6.1.4.1.534.6.6.7.7.3.1 no-access
An entry for a contact sensor
                 contactIndex 1.3.6.1.4.1.534.6.6.7.7.3.1.1 integer32 no-access
A unique value for each contact sensor. Its value ranges from 1 to contactCount.
                 contactName 1.3.6.1.4.1.534.6.6.7.7.3.1.2 octet string read-write
A descriptive name for the contact sensor.
                 contactProbeStatus 1.3.6.1.4.1.534.6.6.7.7.3.1.3 integer read-only
Indicates whether a probe is connected or not. Will not be returned if the contact sensor is internal to the ePDU, in that case only contactState should be read. Enumeration: 'bad': -1, 'connected': 1, 'disconnected': 0.
                 contactState 1.3.6.1.4.1.534.6.6.7.7.3.1.4 integer read-only
The state of the contact sensor. Enumeration: 'contactClosed': 1, 'contactOpen': 0, 'contactBad': -1.
     conformance 1.3.6.1.4.1.534.6.6.7.25
           eatonEpduCompliances 1.3.6.1.4.1.534.6.6.7.25.1
The requirements for conforming to the ePDU MIB.
           objectGroups 1.3.6.1.4.1.534.6.6.7.25.5
               epduRequiredGroup 1.3.6.1.4.1.534.6.6.7.25.5.1
Minimal objects are required to conform to this MIB.
               epduOptionalGroup 1.3.6.1.4.1.534.6.6.7.25.5.2
Most objects in this MIB are optional.
               epduNotifyGroup 1.3.6.1.4.1.534.6.6.7.25.5.3
These notifications will be supported depending on the features of the ePDU. Check the web interface for options to turn these notifications on/off. If an option is not listed, then the ePDU likely does not support that notification.