Dell-TRUNK-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: Dell-TRUNK-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlDot3adAgg 1.3.6.1.4.1.89.65
The private MIB module definition for trunk support in Dell devices.
       rlDot3adAggMibVersion 1.3.6.1.4.1.89.65.1 integer read-only
MIB's version, the current version is 1.
       rlDot3adAggBalanceTable 1.3.6.1.4.1.89.65.2 no-access
An entry of this table specifies a balancing criterion used for the corresponding dot3adAggIndex.
           rlDot3adAggBalanceEntry 1.3.6.1.4.1.89.65.2.1 no-access
A list of information for each dot3adAggIndex.
               rlDot3adAggBalanceForwardType 1.3.6.1.4.1.89.65.2.1.1 integer read-only
A Forwarding type: Bridging or Routing. Enumeration: 'bridging': 1, 'routing': 2.
               rlDot3adAggBalanceLayer 1.3.6.1.4.1.89.65.2.1.2 integer read-write
A Network Layer Number, may have the following values: 2, 3 or 4. The default value is: Bridging: 2 Routing: 3.
               rlDot3adAggBalanceUsedAddresses 1.3.6.1.4.1.89.65.2.1.3 integer read-write
Specifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it). Enumeration: 'vlanId': 4, 'srcAddr': 2, 'ethType': 5, 'notApplied': 0, 'dstAddr': 1, 'dstAndSrcAddr': 3.
               rlDot3adAggBalanceBroadcastType 1.3.6.1.4.1.89.65.2.1.4 integer read-write
Specifies a balancing criterion used for L2 broadcast and unknown frames: common: a link allocated for broadcast and unknown frames is used for unicast frames too dedicated: a link allocated for broadcast and unknown frames is not used for unicast frames Enumeration: 'dedicated': 1, 'common': 0.
       rlDot3adAggNumOfTrunks 1.3.6.1.4.1.89.65.3 integer read-only
The number of trunks supported by the device.
       rlDot3adAggMaxPortsInTrunks 1.3.6.1.4.1.89.65.4 integer read-only
The maximun number of ports in a trunk.
       rlDot3adAggTrunkCreationSupport 1.3.6.1.4.1.89.65.5 integer read-write
Specifies if there is support to rldot3adAggCreationTable, and the type of the support: supportedTrunkOrLacp - ports that are members in some trunk are belongs to it by manual configuration or by lacp, but not togther. notSupported - there is not support to rldot3adAggCreationTable. Enumeration: 'supportsTrunkOrLacp': 1, 'notSupported': 0.
       rlDot3adAggCreationTable 1.3.6.1.4.1.89.65.6 no-access
An entry of this table is for creation of an aggregator for the corresponding dot3adAggIndex, when the value of the rlDot3adAggCreationSupport is diffrent from notSupported.
           rlDot3adAggCreationEntry 1.3.6.1.4.1.89.65.6.1 no-access
An information for each dot3adAggIndex.
               rlDot3adAggCreationTrunk 1.3.6.1.4.1.89.65.6.1.1 truthvalue read-write
The aggregator can aggregate ports in manual configuration.
               rlDot3adAggCreationLacp 1.3.6.1.4.1.89.65.6.1.2 truthvalue read-write
The aggregator can aggregate ports by lacp.
       rlDot3adAggLoadBalancingPerTrunk 1.3.6.1.4.1.89.65.7 truthvalue read-only
Specifies if load balancing is defined per trunk or per device.
       rlDot3adAggPortLacpTable 1.3.6.1.4.1.89.65.8 no-access
An entry of this table specifies lacp protocol state and statistics for the corresponding dot3adAggPortIndex.
           rlDot3adAggPortLacpEntry 1.3.6.1.4.1.89.65.8.1 no-access
A list of information for each dot3adAggPortIndex.
               rlDot3adAggPortLacpPdusRx 1.3.6.1.4.1.89.65.8.1.1 counter32 read-only
The number of valid LACPDUs received on this Aggregation Port. This value is read-only.
               rlDot3adAggPortLacpPDUsTx 1.3.6.1.4.1.89.65.8.1.2 counter32 read-only
The number of LACPDUs transmitted on this Aggregation Port. This value is read-only.
               rlDot3adAggPortLacpRxState 1.3.6.1.4.1.89.65.8.1.3 integer read-only
This attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine is in the EXPIRED state, 'defaulted' if the Receive state machine is in the DEFAULTED state, 'initialize' if the Receive state machine is in the INITIALIZE state, 'portDisabled' if the Receive state machine is in the PORT_DISABLED state, or 'lacpDisabled' if the Receive state machine is in the LACP_DISABLED state. This value is read-only. Enumeration: 'lacpDisabled': 6, 'portDisabled': 5, 'current': 1, 'defaulted': 3, 'initialize': 4, 'expired': 2.
               rlDot3adAggPortLacpMuxState 1.3.6.1.4.1.89.65.8.1.4 integer read-only
This attribute holds the value 'detached' if the Mux state machine for the Aggregation Port is in the DETACHED state, 'waiting' if the Mux state machine is in the WAITING state, 'attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, 'collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, 'distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and 'collecting_ distributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only. Enumeration: 'collecting': 4, 'collectingDistributing': 6, 'attached': 3, 'distributing': 5, 'waiting': 2, 'detached': 1.
               rlDot3adAggPortLacpPeriodicState 1.3.6.1.4.1.89.65.8.1.5 integer read-only
This attribute holds the value 'noPeriodic' if the Periodic state machine for the Aggregation Port is in the NO_PERIODIC state, 'fastPeriodic' if the Mux state machine is in the FAST_PERIODIC state, 'slowPeriodic' if the Mux state machine for the Aggregation Port is in the SLOW_PERIODIC state, or 'periodicTx' if the Periodic state machine for the Aggregation Port is in the PERIODIC_TX state. This value is read-only. Enumeration: 'slowPeriodic': 3, 'noPeriodic': 1, 'fastPeriodic': 2, 'periodicTx': 4.
               rlDot3adAggPortLacpSelected 1.3.6.1.4.1.89.65.8.1.6 integer read-only
This attribute holds the value 'unselected' if the Selected variable for the Aggregation Port is set to UNSELECTED, 'selected' if the Selected variable for the Aggregation Port is set to SELECTED, or 'waiting' if the Selected variable for the Aggregation Port is set to WAITING. This value is read-only. Enumeration: 'waiting': 3, 'selected': 2, 'unselected': 1.
               rlDot3adAggPortLacpReady 1.3.6.1.4.1.89.65.8.1.7 truthvalue read-only
A read-only Boolean value indicating whether the Aggregation Port is in the WAITING state in the Mux state machine and its wait_while_timer has expired ('TRUE'). otherwise, its valus is 'FALSE'.
               rlDot3adAggPortLacpPortMoved 1.3.6.1.4.1.89.65.8.1.8 truthvalue read-only
A read-only Boolean value indicating whether the Partner_Oper_System or Partner_Oper_Port_Number in use by the Aggregation Port has been changed in an incoming LACPDU ('TRUE'). otherwise, its valus is 'FALSE'.
               rlDot3adAggPortLacpNNT 1.3.6.1.4.1.89.65.8.1.9 truthvalue read-only
A read-only Boolean value indicating whether there is a new protocol information that should be transmitted on the link, or that the Partner needs to be reminded of the old information. otherwise, its valus is 'FALSE'.
               rlDot3adAggPortLacpPeriodicTxTimer 1.3.6.1.4.1.89.65.8.1.10 integer read-only
The amount of time in seconds remaining before the Periodeic Tx timer will expire. This value is read-only.
               rlDot3adAggPortLacpCurrentWhileTimer 1.3.6.1.4.1.89.65.8.1.11 integer read-only
The amount of time in seconds remaining before the Current While timer will expire. This value is read-only.
               rlDot3adAggPortLacpWaitWhileTimer 1.3.6.1.4.1.89.65.8.1.12 integer read-only
The amount of time in seconds remaining before the Wait While timer will expire. This value is read-only.
       rlDot3adAggLacpMembershipRestrictionsSupport 1.3.6.1.4.1.89.65.9 truthvalue read-write
Specifies if there is support to rlDot3adAggLacpMembershipRestrictionsTable.
       rlDot3adAggLacpMembershipRestrictionsTable 1.3.6.1.4.1.89.65.10 no-access
An entry of this table specifies membership restrictions for ports that lacp is enbaled on them, and try to attach to the corresponding dot3adAggIndex.
             rlDot3adAggLacpMembershipRestrictionsEntry 1.3.6.1.4.1.89.65.10.1 no-access
A list of information for each dot3adAggIndex.
                 rlDot3adAggLacpMembershipRestrictionsPartnerAdminKey 1.3.6.1.4.1.89.65.10.1.1 unsigned32 read-write
This variable specifies the administrative key of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set.
                 rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode 1.3.6.1.4.1.89.65.10.1.2 unsigned32 read-write
This variable specifies the required speed of the LACP aggregator in bits per second. A value of 10 is returned for 10G. A value of 0 is returned if the value of the variable hasn't been set.
                 rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId 1.3.6.1.4.1.89.65.10.1.3 physaddress read-write
This variable specifies the administrative MAC Address of the remote LACP aggregator. A null mac address is returned if the value of the variable hasn't been set.
                 rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority 1.3.6.1.4.1.89.65.10.1.4 unsigned32 read-write
This variable specifies the administrative System Priority of the remote LACP aggregator. A value of 0 is returned if the value of the variable hasn't been set.
                 rlDot3adAggLacpMembershipRestrictionsIndividualAggregator 1.3.6.1.4.1.89.65.10.1.5 truthvalue read-write
This variable specifies if the lacp aggregator represents an Aggregate ('FALSE') or an Individual link ('TRUE').