Dell-SSL: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: Dell-SSL
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Dell-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlSsl 1.3.6.1.4.1.89.100
The private MIB module definition for SSL.
         rlSslCertificateGenerationTable 1.3.6.1.4.1.89.100.1 no-access
This table is used for : 1. generating keys and self signed certificate - saved in flash and RAM (not in configuration file) 2. generating certificate requests - saved in RAM, can be read by rlSslCertificateExportTable 3. generating self signed certificate - saved in flash and RAM (not in configuraion file) By setting rlSslCertificateGenerationAction to the appropriate value this action takes place. The other fields of this table are used for each of this actions
             rlSslCertificateGenerationEntry 1.3.6.1.4.1.89.100.1.1 no-access
The row definition for this table.
                 rlSslCertificateGenerationIndex 1.3.6.1.4.1.89.100.1.1.1 integer read-write
This index is always set to 1 no matter for which certificate or certificate request the action refers to.
                 rlSslCertificateGenerationId 1.3.6.1.4.1.89.100.1.1.2 integer read-write
The device can hold a number of keys/certificates/certificate requests. These certificates are always numbered from 1 to N (maximum number of certificates in device). This field decides to which keys/certificates/certificate requests the action refers.
                 rlSslCertificateGenerationCountryName 1.3.6.1.4.1.89.100.1.1.3 displaystring read-write
Value of country name field that will appear when a new certificate request or self signed certificate is generated.
                 rlSslCertificateGenerationStateOrProvinceName 1.3.6.1.4.1.89.100.1.1.4 displaystring read-write
Value of state or province name field that will appear when a new certificate or self signed certificate is generated.
                 rlSslCertificateGenerationLocalityName 1.3.6.1.4.1.89.100.1.1.5 displaystring read-write
Value of locality field that will appear when a new certificate or self signed certificate is generated.
                 rlSslCertificateGenerationOrganizationName 1.3.6.1.4.1.89.100.1.1.6 displaystring read-write
Value of organization field that will appear when a new certificate or self signed certificate is generated.
                 rlSslCertificateGenerationOrganizationUnitName 1.3.6.1.4.1.89.100.1.1.7 displaystring read-write
Value of organization field that will appear when a new certificate or self signed certificate is generated.
                 rlSslCertificateGenerationCommonName 1.3.6.1.4.1.89.100.1.1.8 displaystring read-write
Value of common name field that will appear when a new certificate or self signed certificate is generated.
                 rlSslCertificateGenerationValidDays 1.3.6.1.4.1.89.100.1.1.9 integer read-write
When generating self signed certificate this field sets the valid fields. 'Valid from' is current GMT and 'valid to' current GMT + the value of this field.
                 rlSslCertificateGenerationRsaKeyLength 1.3.6.1.4.1.89.100.1.1.10 integer read-write
Setting the RSA key size that will be created when a new key is generated - generateRsaKeyAndSelfSignedCertificate
                 rlSslCertificateGenerationPassphrase 1.3.6.1.4.1.89.100.1.1.11 displaystring read-write
When a RSA key is generated (generateRsaKeyAndSelfSignedCertificate) this passphrase is saved in flash and when the time comes and the certificate and the key are exported in PKCS12 format this passphrase is used to encrypt it. If the passphrase is empty the key and certificate can not be exported. There is no method of obtaining this passphrase once a key was generated.
                 rlSslCertificateGenerationAction 1.3.6.1.4.1.89.100.1.1.12 integer read-write
Setting to a regenerateCertificate causes a new certificate to be generated and to be used for all new sessions. Enumeration: 'generateSelfSignedCertificate': 2, 'generateRsaKeyAndSelfSignedCertificate': 1, 'generateCertificateRequest': 4, 'generatePkcs12': 3.
         rlSslCertificateExportTable 1.3.6.1.4.1.89.100.2 no-access
This table is used for viewing saved data from RAM and flash.
             rlSslCertificateExportEntry 1.3.6.1.4.1.89.100.2.1 no-access
The row definition for this table.
                 rlSslCertificateExportId 1.3.6.1.4.1.89.100.2.1.1 integer read-only
Identifies the index of this certficate / certificate request the table holds.
                 rlSslCertificateExportType 1.3.6.1.4.1.89.100.2.1.2 integer read-only
Identifies the type of data the current entry shows. Enumeration: 'certificateOpenSslFormat': 3, 'certificatePemFormat': 2, 'certificateRequestPemFormat': 1, 'certificateAndKeyPkcs12': 4.
                 rlSslCertificateExportFragmentId 1.3.6.1.4.1.89.100.2.1.3 integer read-only
Identifies the index of this fragment in the certificate request.
                 rlSslCertificateExportFragmentText 1.3.6.1.4.1.89.100.2.1.4 octet string read-only
A part of the readable text entry for the certificate request.
         rlSslCertificateSave 1.3.6.1.4.1.89.100.3 integer read-write
Saves data from rlSslCertificateImportTable to RAM and CDB. When an external certificate should be copied to the device first we copy it to rlSslCertificateImportTable and then this scalar is set to the certificate id that we want to save - 1. All entries in rlSslCertificateImportTable that have this id and their format is equal to the current value of rlSslCertificateSaveFormat are concatenated. 2. If the imported certificate format is .. - section 1 result is validated against the key with the same index. If validation fails for any reason - the certificate is not saved and the setting this scalar fails.] This scalar is for certificate 1 only... for certificate 2 use rlSslCertificateSave2
         rlSslCertificateSaveFormat 1.3.6.1.4.1.89.100.4 integer read-write
. Enumeration: 'x509': 1, 'pkcs12': 2.
         rlSslImportedPKCS12CertificatePassphrase 1.3.6.1.4.1.89.100.5 displaystring read-write
.
         rlSslCertificateImportTable 1.3.6.1.4.1.89.100.6 no-access
This table is used for copying an external certificate to the device - see rlSslCertificateSave
             rlSslCertificateImportEntry 1.3.6.1.4.1.89.100.6.1 no-access
The row definition for this table.
                 rlSslCertificateImportId 1.3.6.1.4.1.89.100.6.1.1 integer read-write
The certificate ID.
                 rlSslCertificateImportFormat 1.3.6.1.4.1.89.100.6.1.2 integer read-write
. Enumeration: 'x509': 1, 'pkcs12': 2.
                 rlSslCertificateImportFragmentId 1.3.6.1.4.1.89.100.6.1.3 integer read-write
Identifies the index of this fragment in the certificate.
                 rlSslCertificateImportFragmentText 1.3.6.1.4.1.89.100.6.1.4 octet string read-write
A part of the readable text entry for the certificate.
                 rlSslCertificateImportFragmentStatus 1.3.6.1.4.1.89.100.6.1.5 rowstatus read-write
         rlSslSSLv2Enable 1.3.6.1.4.1.89.100.7 integer read-write
if enabled then SSLv2 will be supported , if disabled SSLv2 won't be supported. only SSLV3 and TSL1. Note: disabling SSLv2 is more secure. Enumeration: 'disabled': 2, 'enabled': 1.
         rlSslImportExportSelfKeyTable 1.3.6.1.4.1.89.100.8 no-access
This table can be used for 2 purposes: 1) Importing public/private key pair to serve as the device key when acting as SSL server. This is done by setting entries to this table, according to the specified format. When the last entry (footer) is set, the whole key pair is checked and if valid, stored in CDB. 2) Exporting the device SSL server public/private key. This can be done by performing GetNext operations on this table.
             rlSslImportExportSelfKeyEntry 1.3.6.1.4.1.89.100.8.1 no-access
The row definition for this table.
                 rlSslImportExportSelfKeyFormat 1.3.6.1.4.1.89.100.8.1.1 integer no-access
Specifies the format of public/key pair. The following formats are supported for import/export: 1) uuencoded_format - in this format both private and public key are in uu-encoded format, and are seperated from one another by header and footer. An example of the concateneation of all fragments in this format is: -----BEGIN RSA PRIVATE KEY----- tDaNkZZoCxXfkLLsLDlZ6T9H8U4Gz637eRV7BYBpapkidAxY1UG0/qgfKLPkbId4wzht6ArV9bE4fMtX wSMOxL3q31pOmUdVhjbWYcgZQBDy1DjFSbuIEdP85c96B9bBE2nPv90mSvb/6j8R2NItT/KJeiYMtLtI N3m6/zESKJGIrX0jP1RFDjVZSS5chSAFgB0egsLZEyOQn7jAqpX/x/easD2J6F/OjPXlJ9Hff2tMb3NU QYyBoWH2J9IxhWB6Vo66R9Y04JGR18uL/rV2sMCtpg5ppkVTEpNTp9qE1yXocR2NmzUfNFap+GJ4IHj8 CzkVfmJM/kEWaJsYgHbAgLyRg4QVyelfobv1B71aQ+u1z9KGu/QajkWdR04OQfsGOL1CvU2LGYDcRjfH jv+jl/UkDRRjoD9kt2WvouT+OL6esvKl0OJBqWbGNXg9TWv/VLtJIwgUno+MLaJuOM4Fh44+wpnqUXwQ TFtBFc8pzt5BoOwbv9gXpicTkq4/+GhwXWXxSVFebKhnHAvKSLT+Ba7K7ZeR8EIIxbXdDNFOiS45R2KI jxxXLXK44u6KGl5MygCKXUOFlJ+Zhgrq6ZH17z/RVJQ2CWqb5Ekn9GY3kH9QZ3mb4MDPfriWi2lHGXHY JmJd4SLQhpBdnOS5tu84QmyU3dNbAdzghDsR+dEY/6g7Cn0kcVkeHNZ0H+mCZik5f6XBD8eplkk43bdR FrkwTeAjwurGcKwdiKkR4DlfSq3DKssVBucTqUpqsKqPXLwTIL44rWKhEPXgGPB2XDG0VLvIRKkAgEGI LNTwOm091Ro= -----END RSA PRIVATE KEY----- -----BEGIN RSA PUBLIC KEY----- MIGHAoGBAOeIC9gRg3YaEGGMp3C00qNwLINAEDZV/J4BWM5WnWwCWZyHXDs2XiEmFu0ZONAD4gcT2f2f NNfCBPye39VVuOkKQuSV0MLLX5800LZ4y1BNcPzPZHpnGaCzl7iAjhfj9MolzAh5VRjeiYt0t1um4dm+ q9A4BtfpJqDYxCW9uxd/AgEj -----END RSA PUBLIC KEY----- Enumeration: 'uuencoded-format': 1.
                 rlSslImportExportSelfKeyIndex 1.3.6.1.4.1.89.100.8.1.2 integer no-access
Identifies the SSL server key index (there can be more than one key).
                 rlSslImportExportSelfKeyFragmentId 1.3.6.1.4.1.89.100.8.1.3 integer no-access
Identifies the index of this fragment in the key pair input/output.
                 rlSslImportExportSelfKeyAlgorithm 1.3.6.1.4.1.89.100.8.1.4 rlsslpublickeyalgorithm read-write
Identifies the type of key pair.
                 rlSslImportExportSelfKeyFragmentText 1.3.6.1.4.1.89.100.8.1.5 octet string read-write
A part of the readable text entry for the key pair input/output.
         rlSslCertificateSave2 1.3.6.1.4.1.89.100.9 integer read-write
Saves data from rlSslCertificateImportTable to RAM and CDB. When an external certificate should be copied to the device first we copy it to rlSslCertificateImportTable and then this scalar is set to the certificate id that we want to save - 1. All entries in rlSslCertificateImportTable that have this id and their format is equal to the current value of rlSslCertificateSaveFormat are concatenated. 2. If the imported certificate format is .. - section 1 result is validated against the key with the same index. If validation fails for any reason - the certificate is not saved and the setting this scalar fails.] This scalar is for certificate 2 only... for certificate 1 use rlSslCertificateSave
         rlSslisCertificate1Default 1.3.6.1.4.1.89.100.10 truthvalue read-write
if set to true then this is the default key , will be configured when auto generation is done , will set to try , all other cases will be set to false.
         rlSslisCertificate2Default 1.3.6.1.4.1.89.100.11 truthvalue read-write
if set to true then this is the default key , will be configured when auto generation is done , will set to try , all other cases will be set to false.