Dell-AAA: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: Dell-AAA
Download as:   
SNMPv2-CONF, Dell-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlAAA 1.3.6.1.4.1.89.79
The private MIB module definition for Authentication, Authorization and Accounting in Dell devices.
       rlAAAMibVersion 1.3.6.1.4.1.89.79.1 integer read-only
MIB's version, the current version is 3. The difference in rlAAACreationDateSystemPasswordLevel15 and rlAAALocalUserEntry.
       rlAAARetries 1.3.6.1.4.1.89.79.2 integer read-write
Determines the number of retries for each method (Radius, local passwords, local users table and tacacs).
       rlAAARadiusEnabled 1.3.6.1.4.1.89.79.3 truthvalue read-write
Specifies whether AAA will use Radius. When to use Radius exactly depends on its position in the methods list.
       rlAAATacacsEnabled 1.3.6.1.4.1.89.79.4 truthvalue read-write
Specifies whether AAA will use Tacacs. When to use Tacacs exactly depends on its position in the methods list.
       rlAAALocalUserEnabled 1.3.6.1.4.1.89.79.5 truthvalue read-write
Specifies whether AAA will use the local users table. When to use the table exactly depends on its position in the methods list.
       rlAAASystemPasswordEnabled 1.3.6.1.4.1.89.79.6 truthvalue read-write
Specifies whether AAA will use the system password. When to use the passwords exactly depends on its position in the methods list.
       rlAAALinePasswordEnabled 1.3.6.1.4.1.89.79.7 truthvalue read-write
Specifies whether AAA will use the line password. When to use the passwords exactly depends on its position in the methods list.
       rlAAAAlwaysSuccessEnabled 1.3.6.1.4.1.89.79.8 truthvalue read-write
Specifies whether AAA will use the always success method. When to use that method exactly depends on its position in the methods list.
       rlAAARadiusSupported 1.3.6.1.4.1.89.79.9 truthvalue read-only
This mib show whether Radius is supported in AAA. If the value is false Radius will not be used as an authentication and accounting method. If the value is true Radius will be used by AAA for authentication and accounting if the the AAA was configured to do so (by setting the appropriate mibs).
       rlAAATacacsSupported 1.3.6.1.4.1.89.79.10 truthvalue read-only
This mib show whether Tacacs+ is supported in AAA. If the value is false Tacacs+ will not be used as an authentication and accounting method. If the value is true Tacacs+ will be used by AAA for authentication and accounting if the the AAA was configured to do so (by setting the appropriate mibs).
       rlAAALocalUserSupported 1.3.6.1.4.1.89.79.11 truthvalue read-only
This mib show whether the local users db is supported in AAA.If the value is false the local users db will not be used as an authentication and accounting method. If the value is true the local users db will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs).
       rlAAASystemPasswordSupported 1.3.6.1.4.1.89.79.12 truthvalue read-only
This mib show whether system password is supported in AAA. If the value is false system password will not be used as an authentication and accounting method. If the value is true the system password will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs).
       rlAAALinePasswordSupported 1.3.6.1.4.1.89.79.13 truthvalue read-only
This mib show whether line password is supported in AAA. If the value is false line password will not be used as an authentication and accounting method. If the value is true the line password will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs).
       rlAAALineAlwaysSuccessSupported 1.3.6.1.4.1.89.79.14 truthvalue read-only
This mib show whether line always success method is supported in AAA.If the value is false always success method will not be used as an authentication and accounting method. If the value is true the always success method will be used by AAA for authentication and accounting method if the the AAA was configured to do so (by setting the appropriate mibs).
       rlAAAMethodListTable 1.3.6.1.4.1.89.79.15 no-access
The table specifies all methods list per method name.
             rlAAAMethodListEntry 1.3.6.1.4.1.89.79.15.1 no-access
The row definition for this table.
                 rlAAAMethodListName 1.3.6.1.4.1.89.79.15.1.1 displaystring read-write
Line Method List Name
                 rlAAAMethodType1 1.3.6.1.4.1.89.79.15.1.2 rlaaamethodtype read-write
first method type that will be used in the method linked list.
                 rlAAAMethodType2 1.3.6.1.4.1.89.79.15.1.3 rlaaamethodtype read-write
second method type that will be used in the method linked list.
                 rlAAAMethodType3 1.3.6.1.4.1.89.79.15.1.4 rlaaamethodtype read-write
3th method type that will be used in the method linked list.
                 rlAAAMethodType4 1.3.6.1.4.1.89.79.15.1.5 rlaaamethodtype read-write
4th method type that will be used in the method linked list.
                 rlAAAMethodType5 1.3.6.1.4.1.89.79.15.1.6 rlaaamethodtype read-write
5th method type that will be used in the method linked list.
                 rlAAAMethodType6 1.3.6.1.4.1.89.79.15.1.7 rlaaamethodtype read-write
6th method type that will be used in the method linked list.
                 rlAAAMethodType7 1.3.6.1.4.1.89.79.15.1.8 rlaaamethodtype read-write
7th method type that will be used in the method linked list.
                 rlAAAMethodListStatus 1.3.6.1.4.1.89.79.15.1.9 rowstatus read-write
method list status can be destroy or createAndGo
                 rlAAAAuthorizeEnable 1.3.6.1.4.1.89.79.15.1.10 integer read-write
flag that indicates whether authorizatoin is enabled
       rlAAALineTable 1.3.6.1.4.1.89.79.16 no-access
The table specifies all lines, their passwords and their authorizations level .the table ordered lexicography by the line name. when a new line is being authenticate the search in line table is from the first entry in table till it find the first entry that fit application input line parameters .
             rlAAALineEntry 1.3.6.1.4.1.89.79.16.1 no-access
The row definition for this table.
                 rlAAALinePortType 1.3.6.1.4.1.89.79.16.1.1 rlaaalineporttype read-write
the physical port type .
                 rlAAAIfIndex 1.3.6.1.4.1.89.79.16.1.2 unsigned32 read-write
Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0.
                 rlAAAServiceType 1.3.6.1.4.1.89.79.16.1.3 rlaaaservicetype read-write
the service type
                 rlAAALineMethodListNameLevel1 1.3.6.1.4.1.89.79.16.1.4 displaystring read-write
Method list Name for level 1 .That name points to the method list table .It is the key in method list table .in that way we can reach the methods list to be used for that line
                 rlAAALineMethodListNameLevel2 1.3.6.1.4.1.89.79.16.1.5 displaystring read-write
Method list Name for level 2 that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for that line
                 rlAAALineMethodListNameLevel3 1.3.6.1.4.1.89.79.16.1.6 displaystring read-write
Method list Name for level 3 that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for this line
                 rlAAALineMethodListNameLevel4 1.3.6.1.4.1.89.79.16.1.7 displaystring read-write
Method list Name for level 4-that name points to the method list table it is the key in method list table .by that way we can reach the methods list to be used for this line
                 rlAAALineMethodListNameLevel5 1.3.6.1.4.1.89.79.16.1.8 displaystring read-write
Method list Name for level 5 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
                 rlAAALineMethodListNameLevel6 1.3.6.1.4.1.89.79.16.1.9 displaystring read-write
Method list Name for level 6 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
                 rlAAALineMethodListNameLevel7 1.3.6.1.4.1.89.79.16.1.10 displaystring read-write
Method list Name for level 7 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
                 rlAAALineMethodListNameLevel8 1.3.6.1.4.1.89.79.16.1.11 displaystring read-write
Method list Name for level 8 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
                 rlAAALineMethodListNameLevel9 1.3.6.1.4.1.89.79.16.1.12 displaystring read-write
Method list Name for level 9 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
                 rlAAALineMethodListNameLevel10 1.3.6.1.4.1.89.79.16.1.13 displaystring read-write
Method list Name for level 10 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
                 rlAAALineMethodListNameLevel11 1.3.6.1.4.1.89.79.16.1.14 displaystring read-write
Method list Name for level 11 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
                 rlAAALineMethodListNameLevel12 1.3.6.1.4.1.89.79.16.1.15 displaystring read-write
Method list Name for level 12 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
                 rlAAALineMethodListNameLevel13 1.3.6.1.4.1.89.79.16.1.16 displaystring read-write
Method list Name for level 13 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
                 rlAAALineMethodListNameLevel14 1.3.6.1.4.1.89.79.16.1.17 displaystring read-write
Method list Name for level 14 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
                 rlAAALineMethodListNameLevel15 1.3.6.1.4.1.89.79.16.1.18 displaystring read-write
Method list Name for level 15 that name points to the method list table it is the key in method list table .in that way we can reach the methods list to be used for that line
                 rlAAALinePassword 1.3.6.1.4.1.89.79.16.1.19 displaystring read-write
Line Password. Zero length password is considered as no password. Password with zero length means that in case this password is the method to be used a method fail is returned and no other method is being used. allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
                 rlAAALineStatus 1.3.6.1.4.1.89.79.16.1.20 rowstatus read-write
Line status can be destroy or createAndGo
                 rlAAALineLockedState 1.3.6.1.4.1.89.79.16.1.21 integer read-only
Line locked status Enumeration: 'usable': 1, 'locked': 0.
                 rlAAALineConsFailedLogins 1.3.6.1.4.1.89.79.16.1.22 counter32 read-only
Number of last consecutive failed logins
                 rlAAALinePasswordValidTime 1.3.6.1.4.1.89.79.16.1.23 unsigned32 read-write
The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password.
                 rlAAALinePasswordExpieryDate 1.3.6.1.4.1.89.79.16.1.24 displaystring read-only
If Line password aging is active, the date on which The current password will expire. Otherwise zero size string
       rlAAALocalUserTable 1.3.6.1.4.1.89.79.17 no-access
The table specifies all usernames, their passwords and their authorizations.
             rlAAALocalUserEntry 1.3.6.1.4.1.89.79.17.1 no-access
The row definition for this table.
                 rlAAALocalUserName 1.3.6.1.4.1.89.79.17.1.1 displaystring read-write
Local User Name
                 rlAAALocalUserPassword 1.3.6.1.4.1.89.79.17.1.2 displaystring read-write
Local User Password .The password can be null allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
                 rlAAALocalUserPrivilage 1.3.6.1.4.1.89.79.17.1.3 integer read-write
Local User Privilage
                 rlAAALocalHostStatus 1.3.6.1.4.1.89.79.17.1.4 rowstatus read-write
Local User status
                 rlAAALocalLockedState 1.3.6.1.4.1.89.79.17.1.5 integer read-only
Local User locked status Enumeration: 'usable': 1, 'locked': 0.
                 rlAAALocalConsFailedLogins 1.3.6.1.4.1.89.79.17.1.6 counter32 read-only
Number of last consecutive failed logins
                 rlAAALocalPasswordValidTime 1.3.6.1.4.1.89.79.17.1.7 unsigned32 read-write
The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password.
                 rlAAALocalPasswordExpieryDate 1.3.6.1.4.1.89.79.17.1.8 displaystring read-only
If User password aging is active, the date on which The current password will expire. Otherwise zero size string
                 rlAAALocalPasswordCreationDate 1.3.6.1.4.1.89.79.17.1.9 displaystring read-only
The date on which the current password was created. Otherwise zero size string
       rlAAASystemPasswordlevel1 1.3.6.1.4.1.89.79.18 displaystring read-write
system Password for level 1. allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel2 1.3.6.1.4.1.89.79.19 displaystring read-write
system Password for level 2 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel3 1.3.6.1.4.1.89.79.20 displaystring read-write
system Password for level 3 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel4 1.3.6.1.4.1.89.79.21 displaystring read-write
system Password for level 4 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel5 1.3.6.1.4.1.89.79.22 displaystring read-write
system Password for level 5 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel6 1.3.6.1.4.1.89.79.23 displaystring read-write
system Password for level 6 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel7 1.3.6.1.4.1.89.79.24 displaystring read-write
system Password for level 7 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel8 1.3.6.1.4.1.89.79.25 displaystring read-write
system Password for level 8 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel9 1.3.6.1.4.1.89.79.26 displaystring read-write
system Password for level 9 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel10 1.3.6.1.4.1.89.79.27 displaystring read-write
system Password for level 10 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel11 1.3.6.1.4.1.89.79.28 displaystring read-write
system Password for level 11 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel12 1.3.6.1.4.1.89.79.29 displaystring read-write
system Password for level 12 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel13 1.3.6.1.4.1.89.79.30 displaystring read-write
system Password for level 13 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel14 1.3.6.1.4.1.89.79.31 displaystring read-write
system Password for level 14 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not not part of it
       rlAAASystemPasswordlevel15 1.3.6.1.4.1.89.79.32 displaystring read-write
system Password for level 15 allowed formats: a. Display string starting with '$' for clear text b. Encrypted password: starts with # sign followed by 32 octets representing Hex Decimal value(in the 0-9 a-f A-F range) the $ and # as first octet are a directive to indicate what is the type of password and are not part of it
       rlAAAUserTable 1.3.6.1.4.1.89.79.33 no-access
The table holds all current users that have been authenticated.
             rlAAAUserEntry 1.3.6.1.4.1.89.79.33.1 no-access
The row definition for this table.
                 rlAAAUserIndex 1.3.6.1.4.1.89.79.33.1.1 unsigned32 no-access
User Index
                 rlAAAUserServiceType 1.3.6.1.4.1.89.79.33.1.2 rlaaaservicetype read-only
The service that the user uses. Service dont care is console terminal.
                 rlAAAUserRemoteIpAddress 1.3.6.1.4.1.89.79.33.1.3 ipaddress read-only
User remote IP address.
                 rlAAAUserName 1.3.6.1.4.1.89.79.33.1.4 displaystring read-only
User Name
                 rlAAAUserLevel 1.3.6.1.4.1.89.79.33.1.5 unsigned32 read-only
User level
                 rlAAAUserIfIndex 1.3.6.1.4.1.89.79.33.1.6 unsigned32 read-only
User if index.
                 rlAAAUserLoginDate 1.3.6.1.4.1.89.79.33.1.7 dateandtime read-only
Date of use creation.
                 rlAAAUserLoginDurationMS 1.3.6.1.4.1.89.79.33.1.8 unsigned32 read-only
Time in MS since user login.
       rlAAATest 1.3.6.1.4.1.89.79.34
             rlAAATestPassword 1.3.6.1.4.1.89.79.34.1 integer read-write
This variable enables the user supplying the correct code to use the AAA test feature.
             rlAAATestUserTable 1.3.6.1.4.1.89.79.34.2 no-access
This table enables a user to perform a simulation of authentiction.
                 rlAAATestUserEntry 1.3.6.1.4.1.89.79.34.2.1 no-access
The row definition for this table.
                     rlAAATestUserIndex 1.3.6.1.4.1.89.79.34.2.1.1 unsigned32 read-write
User entry index (the number is used just to identify the user).
                     rlAAATestPortType 1.3.6.1.4.1.89.79.34.2.1.2 rlaaalineporttype read-write
the physical port type .
                     rlAAATestIfIndex 1.3.6.1.4.1.89.79.34.2.1.3 integer read-write
line ifIndex can configue to be zero witch means Don't-care value
                     rlAAATestServiceType 1.3.6.1.4.1.89.79.34.2.1.4 rlaaaservicetype read-write
the service type
                     rlAAATestUserAuthenticationStatus 1.3.6.1.4.1.89.79.34.2.1.5 integer read-only
Shows the ststus of the operation and what is expected from the 'user'. Enumeration: 'needUsername': 2, 'success': 3, 'usedNewMethod': 8, 'deleted': 6, 'failure': 4, 'waiting': 7, 'aborted': 5, 'needPassword': 1.
                     rlAAATestUserAuthenticationAction 1.3.6.1.4.1.89.79.34.2.1.6 integer read-write
By setting this field the process moves from one state to another. On creation the value must be begin. When the value of rlAAATestUserAuthenticationStatus is needPassword the value can be set to receivePassword or abort. When the value of rlAAATestUserAuthenticationStatus is needUsername the value can be set to receiveUsername or abort. When the value of rlAAATestUserAuthenticationStatus is success or failure the value can be set to delete or abort. When the value of rlAAATestUserAuthenticationStatus is aborted the value can be set to delete. When the value of rlAAATestUserAuthenticationStatus is deleted the value can not be set to any value. When the value of rlAAATestUserAuthenticationStatus is waiting the value can be set or abort. Enumeration: 'begin': 1, 'continue': 6, 'receivePassword': 2, 'abort': 4, 'receiveUsername': 3, 'delete': 5.
                     rlAAATestUserInput 1.3.6.1.4.1.89.79.34.2.1.7 displaystring read-write
If the acion was set to receivePassword than this field should hold the value of the password. If the action was set to receiveUsername than this field should hold the value of the username.
                     rlAAATestUserStatus 1.3.6.1.4.1.89.79.34.2.1.8 rowstatus read-write
Entry status. The entry can not be deleted. It will be deleted if unchanged more than 2 minutes.
       rlTacacs 1.3.6.1.4.1.89.79.40
             rlTacacsMibVersion 1.3.6.1.4.1.89.79.40.1 integer read-only
MIB's version, the current version is 1.
             rlTacacsGlobalDefaultTimeout 1.3.6.1.4.1.89.79.40.2 integer read-write
The maximum time (in seconds) to wait for TACACS+ server to reply. This MIB is used if the value of the field rlTacacsServerTimeout is 0.
             rlTacacsGlobalDefaultKey 1.3.6.1.4.1.89.79.40.3 displaystring read-write
Secret key to be shared with TACACS+ server. This MIB is used if the value of the field rlTacacsServerUseGlobalDefaultKey is false.
             rlTacacsGlobalDefaultSourceIpInterface 1.3.6.1.4.1.89.79.40.6 ipaddress read-write
IP address of the interface to use with TACACS+ server. A value of 0.0.0.0 for this object disables source address specification. This MIB is used if the value of the field rlTacacsServerSource is 255.255.255.255.
             rlTacacsServerTable 1.3.6.1.4.1.89.79.40.7 no-access
The (conceptual) table listing the TACACS+ servers with which the cliient shares a secret.
                 rlTacacsServerEntry 1.3.6.1.4.1.89.79.40.7.1 no-access
An entry (conceptual row) representing a TACACS+ server with which the client shares a secret.
                     rlTacacsServerAddress 1.3.6.1.4.1.89.79.40.7.1.1 ipaddress read-write
The IP address of the TACACS+ server referred to in this table entry.
                     rlTacacsServerPortNumber 1.3.6.1.4.1.89.79.40.7.1.2 integer read-write
The TCP port the client establishes connections with this server.
                     rlTacacsServerConnectionType 1.3.6.1.4.1.89.79.40.7.1.3 rltacacsconnectiontype read-write
Specifies TCP connection type between device and TACACS+ server. Either a single open connection between device and server (rlTacacsSingleConnection), or open/close connection per communication session (rlTacacsPerSessionConnection).
                     rlTacacsServerConnectionStatus 1.3.6.1.4.1.89.79.40.7.1.4 rltacacsconnectionstatus read-only
Specifies status TCP connection type between device and TACACS+ server.
                     rlTacacsServerTimeout 1.3.6.1.4.1.89.79.40.7.1.5 integer read-write
The maximum time (in seconds) to wait for this TACACS+ server to reply. Value of 0 means that rlTacacsGlobalDefaultTimeout value is used.
                     rlTacacsServerUseGlobalDefaultKey 1.3.6.1.4.1.89.79.40.7.1.6 truthvalue read-write
If this field is set to true the value in field rlTacacsServerKey is ignored and instead the value in the MIB rlTacacsGlobalDefaultKey is used. Otherwise the value in rlTacacsServerKey is used.
                     rlTacacsServerKey 1.3.6.1.4.1.89.79.40.7.1.7 displaystring read-write
Secret key to be shared with this TACACS+ server.
                     rlTacacsServerSourceIpInterface 1.3.6.1.4.1.89.79.40.7.1.8 ipaddress read-write
IP address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. Value of 255.255.255.255 means that rlTacacsGlobalDefaultSourceIpInterface will be used.
                     rlTacacsServerPriority 1.3.6.1.4.1.89.79.40.7.1.9 integer read-write
Determines the order in which the TACACS+ servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table).
                     rlTacacsServerRowStatus 1.3.6.1.4.1.89.79.40.7.1.10 rowstatus read-write
             rlTacacsGlobalDefaultSourceIPv6Interface 1.3.6.1.4.1.89.79.40.8 inetaddressipv6 read-write
IP address of the interface to use with TACACS+ server. A NULL for this object disables source address specification. This MIB is used if the value of the field rlTacacsServerInetSourceInterface is 255.255.255.255.
             rlTacacsServerInetTable 1.3.6.1.4.1.89.79.40.9 no-access
The (conceptual) table listing the TACACS+ servers with which the cliient shares a secret.
                 rlTacacsServerInetEntry 1.3.6.1.4.1.89.79.40.9.1 no-access
An entry (conceptual row) representing a TACACS+ server with which the client shares a secret.
                     rlTacacsServerInetAddressType 1.3.6.1.4.1.89.79.40.9.1.1 inetaddresstype read-write
The Inet address type of TACACS+ server reffered to in this table entry .IPv6Z type is not supported.
                     rlTacacsServerInetAddress 1.3.6.1.4.1.89.79.40.9.1.2 inetaddress read-write
The Inet Address address of the TACACS+ server referred to in this table entry.
                     rlTacacsServerInetPortNumber 1.3.6.1.4.1.89.79.40.9.1.3 integer read-write
The TCP port the client establishes connections with this server.
                     rlTacacsServerInetConnectionType 1.3.6.1.4.1.89.79.40.9.1.4 rltacacsconnectiontype read-write
Specifies TCP connection type between device and TACACS+ server. Either a single open connection between device and server (rlTacacsSingleConnection), or open/close connection per communication session (rlTacacsPerSessionConnection).
                     rlTacacsServerInetConnectionStatus 1.3.6.1.4.1.89.79.40.9.1.5 rltacacsconnectionstatus read-only
Specifies status TCP connection type between device and TACACS+ server.
                     rlTacacsServerInetTimeout 1.3.6.1.4.1.89.79.40.9.1.6 integer read-write
The maximum time (in seconds) to wait for this TACACS+ server to reply. Value of 0 means that rlTacacsGlobalDefaultTimeout value is used.
                     rlTacacsServerInetUseGlobalDefaultKey 1.3.6.1.4.1.89.79.40.9.1.7 truthvalue read-write
If this field is set to true the value in field rlTacacsServerKey is ignored and instead the value in the MIB rlTacacsGlobalDefaultKey is used. Otherwise the value in rlTacacsServerKey is used.
                     rlTacacsServerInetKey 1.3.6.1.4.1.89.79.40.9.1.8 displaystring read-write
Secret key to be shared with this TACACS+ server.
                     rlTacacsServerInetSourceInterfaceType 1.3.6.1.4.1.89.79.40.9.1.9 inetaddresstype read-write
The Inet address type of the interface to use with this server.
                     rlTacacsServerInetSourceInterface 1.3.6.1.4.1.89.79.40.9.1.10 inetaddress read-write
Inet address of the interface to use with this server. A value of NULL for this object disables source address specification for this server. A value of 255.255.255.255 maens that the global default rlTacacsGlobalDefaultSourceIpInterface or rlTacacsGlobalDefaultSourceIPv6Interface values are used.
                     rlTacacsServerInetPriority 1.3.6.1.4.1.89.79.40.9.1.11 integer read-write
Determines the order in which the TACACS+ servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table).
                     rlTacacsServerInetRowStatus 1.3.6.1.4.1.89.79.40.9.1.12 rowstatus read-write
       rlAAAAuditingEnable 1.3.6.1.4.1.89.79.41 truthvalue read-write
Controls whether SysLog messages should be issued on login events
       rlAAAMinPasswordLength 1.3.6.1.4.1.89.79.42 integer read-write
The minimum length of password for local user authentication defined in field rlAAALocalUserPassword in rlAAALocalUserTable. The value applies only to new or updated user passwords. In actual implementation the range may be reduced to (0 | N-64), where N is a platform dependent (for TIC compatibility N=8)
       rlAAAPasswordHistSize 1.3.6.1.4.1.89.79.43 unsigned32 read-write
The number of most recent password, previously defined for Local User Table, Line Table, System Password Table for specific entity. This list used for password reusing prevention. Value of 0 means none. Changing the value does not cause the loss of history. History Max size is product specific.
       rlAAAPasswordHistHoldTime 1.3.6.1.4.1.89.79.44 unsigned32 read-write
The time in day, which an old password may be used in password history check. Changing the value does not cause the loss of history.
       rlAAASuccLoginWriteToFile 1.3.6.1.4.1.89.79.45 truthvalue read-write
Controls whether successful logins are written to login file
       rlAAALocalLoginHistTable 1.3.6.1.4.1.89.79.46 no-access
The table holds successful login history for all users. This table is read-only.
             rlAAALocalLoginHistEntry 1.3.6.1.4.1.89.79.46.1 no-access
The row definition for this table.
                 rlAAALocalLoginHistName 1.3.6.1.4.1.89.79.46.1.1 displaystring read-only
User Name
                 rlAAALocalLoginHistIndex 1.3.6.1.4.1.89.79.46.1.2 unsigned32 no-access
Index in History for specific user. Lower number means more recent login.
                 rlAAALocalLoginHistServiceType 1.3.6.1.4.1.89.79.46.1.3 rlaaaservicetype read-only
The service that the user uses. Service don't care is console terminal.
                 rlAAALocalLoginHistRemoteIpAddress 1.3.6.1.4.1.89.79.46.1.4 ipaddress read-only
User remote IP address.
                 rlAAALocalLoginHistLocalIpAddress 1.3.6.1.4.1.89.79.46.1.5 ipaddress read-only
local Ip Address on login.
                 rlAAALocalLoginDateTime 1.3.6.1.4.1.89.79.46.1.6 displaystring read-only
Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
                 rlAAALocalLoginMrid 1.3.6.1.4.1.89.79.46.1.7 unsigned32 read-only
Mrid - indicates to which instance the connection was established
       rlAAALinePassLoginHistTable 1.3.6.1.4.1.89.79.47 no-access
The table holds successful login history for Line passwords. This table is read-only.
             rlAAALinePassLoginHistEntry 1.3.6.1.4.1.89.79.47.1 no-access
The row definition for this table.
                 rlAAALinePassLoginHistPortType 1.3.6.1.4.1.89.79.47.1.1 rlaaalineporttype read-write
the physical port type.
                 rlAAALinePassLoginHistIfIndex 1.3.6.1.4.1.89.79.47.1.2 unsigned32 read-write
Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0.
                 rlAAALinePassLoginHistServiceType 1.3.6.1.4.1.89.79.47.1.3 rlaaaservicetype read-write
the service type
                 rlAAALinePassLoginHistIndex 1.3.6.1.4.1.89.79.47.1.4 unsigned32 no-access
Index in History for specific user. Lower number means more recent login.
                 rlAAALinePassLoginHistActServiceType 1.3.6.1.4.1.89.79.47.1.5 rlaaaservicetype read-only
The service that the user uses. Service don't care is console terminal.
                 rlAAALinePassLoginHistRemoteIpAddress 1.3.6.1.4.1.89.79.47.1.6 ipaddress read-only
User remote IP address.
                 rlAAALinePassLoginHistLocalIpAddress 1.3.6.1.4.1.89.79.47.1.7 ipaddress read-only
local Ip Address on login.
                 rlAAALinePassLoginDateTime 1.3.6.1.4.1.89.79.47.1.8 displaystring read-only
Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
                 rlAAALinePassLoginMrid 1.3.6.1.4.1.89.79.47.1.9 unsigned32 read-only
Mrid - indicates to which instance the connection was established
       rlAAASystemLoginHistTable 1.3.6.1.4.1.89.79.48 no-access
The table holds successful login history for system passwords. This table is read-only.
             rlAAASystemLoginHistEntry 1.3.6.1.4.1.89.79.48.1 no-access
The row definition for this table.
                 rlAAASystemLoginHistLevel 1.3.6.1.4.1.89.79.48.1.1 integer read-only
User Name
                 rlAAASystemLoginHistIndex 1.3.6.1.4.1.89.79.48.1.2 unsigned32 no-access
Index in History for specific user. Lower number means more recent login.
                 rlAAASystemLoginHistServiceType 1.3.6.1.4.1.89.79.48.1.3 rlaaaservicetype read-only
The service that the user uses. Service don't care is console terminal.
                 rlAAASystemLoginHistRemoteIpAddress 1.3.6.1.4.1.89.79.48.1.4 ipaddress read-only
User remote IP address.
                 rlAAASystemLoginHistLocalIpAddress 1.3.6.1.4.1.89.79.48.1.5 ipaddress read-only
local Ip Address on login.
                 rlAAASystemLoginDateTime 1.3.6.1.4.1.89.79.48.1.6 displaystring read-only
Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
                 rlAAASystemLoginMrid 1.3.6.1.4.1.89.79.48.1.7 unsigned32 read-only
Mrid - indicates to which instance the connection was established
       rlAAASysPassStatTable 1.3.6.1.4.1.89.79.49 no-access
The table specifies all system password and their security properties: is password locked due to wrong password, when and how it was locked or last unsuccessful login information, expiry date of the password.
             rlAAASysPassStatEntry 1.3.6.1.4.1.89.79.49.1 no-access
The row definition for this table.
                 rlAAASysPassStatLevel 1.3.6.1.4.1.89.79.49.1.1 integer read-only
System password level
                 rlAAASysPassStatLockedState 1.3.6.1.4.1.89.79.49.1.2 integer read-only
System password locked status Enumeration: 'usable': 1, 'locked': 0.
                 rlAAASysPassStatConsFailedLogins 1.3.6.1.4.1.89.79.49.1.3 counter32 read-only
Number of last consecutive failed logins
                 rlAAASysPassStatPasswordValidTime 1.3.6.1.4.1.89.79.49.1.4 unsigned32 read-write
The period of time in days, during which the password, is considered valid for login. Value of 0 means never expired. The actual range is product specific. After this time the system may allow limited number of logins to change the password.
                 rlAAASysPassStatPasswordExpieryDate 1.3.6.1.4.1.89.79.49.1.5 displaystring read-only
If System password aging is active, the date, on which the current password will expire. Otherwise zero size string
       rlAAAMaxNumLogAttmpts 1.3.6.1.4.1.89.79.50 integer read-write
The number of consecutive unsuccessful login attempts before user is locked. Value of 0 means no limit. The actual range is product specific. TIC requirement is 3.
       rlAAAUnlockUserName 1.3.6.1.4.1.89.79.51 displaystring read-write
An action MIB variable setting with value of Local User Name will unlock this user. The value of this variable is not saved to non volatile storage. Read of this variable always returns zero length display string.
       rlAAAUnlockSystemPassword 1.3.6.1.4.1.89.79.52 integer read-write
An action MIB variable setting with value of Level will unlock the system password for this level. The value of this variable is not saved to non volatile storage. Read of this variable always returns zero. Zero (0) does no action.
       rlAAALockedLineTable 1.3.6.1.4.1.89.79.53 no-access
The table specifies lines statuses. Users cannot access the product from remote based on a password of the locked line. This table enables to unlock lines.
             rlAAALockedLineEntry 1.3.6.1.4.1.89.79.53.1 no-access
The row definition for this table.
                 rlAAALockedLinePortType 1.3.6.1.4.1.89.79.53.1.1 rlaaalineporttype read-write
the physical port type .
                 rlAAALockedLineIfIndex 1.3.6.1.4.1.89.79.53.1.2 unsigned32 read-write
Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0.
                 rlAAALockedLineServiceType 1.3.6.1.4.1.89.79.53.1.3 rlaaaservicetype read-write
the service type
                 rlAAALockedLineStatus 1.3.6.1.4.1.89.79.53.1.4 integer read-write
The entry exists only if a line exist. Setting this field to value usable results in resetting the password failure counter, and unlock a locked user. Enumeration: 'usable': 1, 'locked': 0.
       rlAAASystemPasswordVerificationAndSettingTable 1.3.6.1.4.1.89.79.54 no-access
The table specifies per every system level, old and new passwords. Serves for verification the old password and setting a new password.
             rlAAASystemPasswordVerificationAndSettingEntry 1.3.6.1.4.1.89.79.54.1 no-access
The row of system password verification and setting table.
                 rlAAASystemPasswordSettingPrivilegeLevel 1.3.6.1.4.1.89.79.54.1.1 integer no-access
System password Privelege Level to be set.
                 rlAAASystemPasswordVerificationOldPassword 1.3.6.1.4.1.89.79.54.1.2 displaystring read-write
Old system password to be verified.
                 rlAAASystemPasswordSettingNewPassword 1.3.6.1.4.1.89.79.54.1.3 displaystring read-write
New system password to be set.
                 rlAAASystemPasswordConfirmNewPassword 1.3.6.1.4.1.89.79.54.1.4 displaystring read-write
New system password to be confirmed.
       rlAAAAccountingMngMethod 1.3.6.1.4.1.89.79.55 rlaaaaccountingmethod read-write
Method, used for accounting of management sessions, none denotes Accounting is disabled.
       rlAAAAccountingDot1xMethod 1.3.6.1.4.1.89.79.56 rlaaaaccountingmethod read-write
Method, used for accounting of 802.1x sessions, none denotes Accounting is disabled.
       rlAAAUserInetTable 1.3.6.1.4.1.89.79.57 no-access
The table holds all current users that have been authenticated. it coexist with rlAAAUserTable to support IPv4 and IPv6
             rlAAAUserInetEntry 1.3.6.1.4.1.89.79.57.1 no-access
The row definition for this table.
                 rlAAAUserInetIndex 1.3.6.1.4.1.89.79.57.1.1 unsigned32 no-access
User Index
                 rlAAAUserInetServiceType 1.3.6.1.4.1.89.79.57.1.2 rlaaaservicetype read-only
The service that the user uses. Service dont care is console terminal.
                 rlAAAUserInetRemoteIpAddressType 1.3.6.1.4.1.89.79.57.1.3 inetaddresstype read-only
User remote INET address Type.
                 rlAAAUserInetRemoteIpAddress 1.3.6.1.4.1.89.79.57.1.4 inetaddress read-only
User remote INET address.
                 rlAAAUserInetName 1.3.6.1.4.1.89.79.57.1.5 displaystring read-only
User Name
                 rlAAAUserInetLevel 1.3.6.1.4.1.89.79.57.1.6 unsigned32 read-only
User level
                 rlAAAUserInetIfIndex 1.3.6.1.4.1.89.79.57.1.7 unsigned32 read-only
User if index.
                 rlAAAUserInetLoginDate 1.3.6.1.4.1.89.79.57.1.8 dateandtime read-only
Date of use creation.
                 rlAAAUserInetLoginDurationMS 1.3.6.1.4.1.89.79.57.1.9 unsigned32 read-only
Time in MS since user login.
       rlAAALocalLoginHistInetTable 1.3.6.1.4.1.89.79.58 no-access
The table holds successful login history for all users. This table is read-only. it coexist with rlAAALocalLoginHistTable to support IPv4 and IPv6
             rlAAALocalLoginHistInetEntry 1.3.6.1.4.1.89.79.58.1 no-access
The row definition for this table.
                 rlAAALocalLoginHistInetName 1.3.6.1.4.1.89.79.58.1.1 displaystring read-only
User Name
                 rlAAALocalLoginHistInetIndex 1.3.6.1.4.1.89.79.58.1.2 unsigned32 no-access
Index in History for specific user. Lower number means more recent login.
                 rlAAALocalLoginHistInetServiceType 1.3.6.1.4.1.89.79.58.1.3 rlaaaservicetype read-only
The service that the user uses. Service don't care is console terminal.
                 rlAAALocalLoginHistInetRemoteIpAddressType 1.3.6.1.4.1.89.79.58.1.4 inetaddresstype read-only
User remote IP address Type.
                 rlAAALocalLoginHistInetRemoteIpAddress 1.3.6.1.4.1.89.79.58.1.5 inetaddress read-only
User remote IP address.
                 rlAAALocalLoginHistInetLocalIpAddressType 1.3.6.1.4.1.89.79.58.1.6 inetaddresstype read-only
local Ip Address Type on login.
                 rlAAALocalLoginHistInetLocalIpAddress 1.3.6.1.4.1.89.79.58.1.7 inetaddress read-only
local Ip Address on login.
                 rlAAALocalLoginHistInetDateTime 1.3.6.1.4.1.89.79.58.1.8 displaystring read-only
Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
                 rlAAALocalLoginHistInetMrid 1.3.6.1.4.1.89.79.58.1.9 unsigned32 read-only
Mrid - indicates to which instance the connection was established
       rlAAALinePassLoginHistInetTable 1.3.6.1.4.1.89.79.59 no-access
The table holds successful login history for Line passwords. This table is read-only. it coexist with rlAAALinePassLoginHistTable to support IPv4 and IPv6
             rlAAALinePassLoginHistInetEntry 1.3.6.1.4.1.89.79.59.1 no-access
The row definition for this table.
                 rlAAALinePassLoginHistInetPortType 1.3.6.1.4.1.89.79.59.1.1 rlaaalineporttype read-write
the physical port type.
                 rlAAALinePassLoginHistInetIfIndex 1.3.6.1.4.1.89.79.59.1.2 unsigned32 read-write
Identifies the ifindex for which this entry can be used. If index 0 means don't care (can be used for all if indices). For port type console the value could be only 0.
                 rlAAALinePassLoginHistInetServiceType 1.3.6.1.4.1.89.79.59.1.3 rlaaaservicetype read-write
the service type
                 rlAAALinePassLoginHistInetIndex 1.3.6.1.4.1.89.79.59.1.4 unsigned32 no-access
Index in HistInetory for specific user. Lower number means more recent login.
                 rlAAALinePassLoginHistInetActServiceType 1.3.6.1.4.1.89.79.59.1.5 rlaaaservicetype read-only
The service that the user uses. Service don't care is console terminal.
                 rlAAALinePassLoginHistInetRemoteInetAddressType 1.3.6.1.4.1.89.79.59.1.6 inetaddresstype read-only
User remote IP address Type.
                 rlAAALinePassLoginHistInetRemoteInetAddress 1.3.6.1.4.1.89.79.59.1.7 inetaddress read-only
User remote IP address.
                 rlAAALinePassLoginHistInetLocalInetAddressType 1.3.6.1.4.1.89.79.59.1.8 inetaddresstype read-only
local Ip Address Type on login.
                 rlAAALinePassLoginHistInetLocalInetAddress 1.3.6.1.4.1.89.79.59.1.9 inetaddress read-only
local Ip Address on login.
                 rlAAALinePassLoginHistInetDateTime 1.3.6.1.4.1.89.79.59.1.10 displaystring read-only
Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
                 rlAAALinePassLoginHistInetMrid 1.3.6.1.4.1.89.79.59.1.11 unsigned32 read-only
Mrid - indicates to which instance the connection was established
       rlAAASystemLoginHistInetTable 1.3.6.1.4.1.89.79.60 no-access
The table holds successful login history for system passwords. This table is read-only. it coexist with rlAAASystemLoginHistTable to support IPv4 and IPv6
             rlAAASystemLoginHistInetEntry 1.3.6.1.4.1.89.79.60.1 no-access
The row definition for this table.
                 rlAAASystemLoginHistInetLevel 1.3.6.1.4.1.89.79.60.1.1 integer read-only
User Name
                 rlAAASystemLoginHistInetIndex 1.3.6.1.4.1.89.79.60.1.2 unsigned32 no-access
Index in History for specific user. Lower number means more recent login.
                 rlAAASystemLoginHistInetServiceType 1.3.6.1.4.1.89.79.60.1.3 rlaaaservicetype read-only
The service that the user uses. Service don't care is console terminal.
                 rlAAASystemLoginHistInetRemoteInetAddressType 1.3.6.1.4.1.89.79.60.1.4 inetaddresstype read-only
User remote IP address Type.
                 rlAAASystemLoginHistInetRemoteInetAddress 1.3.6.1.4.1.89.79.60.1.5 inetaddress read-only
User remote IP address.
                 rlAAASystemLoginHistInetLocalInetAddressType 1.3.6.1.4.1.89.79.60.1.6 inetaddresstype read-only
local Ip Address Type on login.
                 rlAAASystemLoginHistInetLocalInetAddress 1.3.6.1.4.1.89.79.60.1.7 inetaddress read-only
local Ip Address on login.
                 rlAAASystemLoginHistInetDateTime 1.3.6.1.4.1.89.79.60.1.8 displaystring read-only
Date and time in the SysLog Format: DD-MMM-YYYY HH:MM:SS
                 rlAAASystemLoginHistInetMrid 1.3.6.1.4.1.89.79.60.1.9 unsigned32 read-only
Mrid - indicates to which instance the connection was established
       rlAAAPasswordComplexityEnabled 1.3.6.1.4.1.89.79.61 truthvalue read-write
Specifies whether password complexity rules must be applied.
       rlAAAPasswordComplexityMinCharClasses 1.3.6.1.4.1.89.79.62 integer read-write
Indicates minimal number of character classes from which the password should contain characters if password complexity enabled. charater classes are : lower case, upper case, digits, special characters.
       rlAAAPasswordComplexityNotOldPasswordEnabled 1.3.6.1.4.1.89.79.63 truthvalue read-write
Specifies whether new password can be as same as old password if password complexity enabled.
       rlAAAPasswordComplexityCharRepeat 1.3.6.1.4.1.89.79.64 integer read-write
Indicates that no character in new password can't be repeated more than 3 times if password complexity enabled.
       rlAAAPasswordComplexityNotUserNameEnabled 1.3.6.1.4.1.89.79.65 truthvalue read-write
Specifies whether new password can be as same as user name if password complexity enabled.
       rlAAAPasswordComplexityNotManufacturerEnabled 1.3.6.1.4.1.89.79.66 truthvalue read-write
Specifies whether new password can be as same as manufacturer name if password complexity enabled.
       rlAAAPasswordGlobalAgingTime 1.3.6.1.4.1.89.79.67 integer read-write
Determines whether password aging should be applied. Tic doesn't have to be enabled. If == 0 then aging is disabled. Note: Actual aging will not be enabled if system doesn't have real time clock until, clock is set either by user or SNTP.
       rlAAALocalUserPasswordVerificationAndSettingTable 1.3.6.1.4.1.89.79.68 no-access
The table specifies per every local user, old and new passwords. Serves for verification the old password and setting a new password.
             rlAAALocalUserPasswordVerificationAndSettingEntry 1.3.6.1.4.1.89.79.68.1 no-access
The row of local user password verification and setting table.
                 rlAAALocalUserNameString 1.3.6.1.4.1.89.79.68.1.1 displaystring read-write
Local user name.
                 rlAAALocalUserVerificationOldPassword 1.3.6.1.4.1.89.79.68.1.2 displaystring read-write
Local user old password to be verified.
                 rlAAALocalUserSettingNewPassword 1.3.6.1.4.1.89.79.68.1.3 displaystring read-write
Local user new password to be set.
                 rlAAALocalUserConfirmNewPassword 1.3.6.1.4.1.89.79.68.1.4 displaystring read-write
Local user new password for confirmation.
       rlAAACreationDateSystemPasswordLevel15 1.3.6.1.4.1.89.79.69 displaystring read-only
The date on which the system Password for level 15 was created. Otherwise zero size string
       rlAAAPasswordRecoveryDisable 1.3.6.1.4.1.89.79.70 truthvalue read-write
if this MIB is set to TRUE then when user will use 'password Recovery' to the device , the configuration will automatically be erased.
       rlRadiusMibVersion 1.3.6.1.4.1.89.80.1 integer read-only
MIB's version, the current version is 2. 1 - original version. 2 - field rlRadiusServerUsage was added to rlRadiusServerEntry
       rlRadiusGlobalDefaultTimeout 1.3.6.1.4.1.89.80.2 integer read-write
The maximum time (in seconds) to wait for this RADIUS server to reply. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultTimeout is false.
       rlRadiusGlobalDefaultRetries 1.3.6.1.4.1.89.80.3 integer read-write
The number of times to try contacting this RADIUS server. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultRetries is false.
       rlRadiusGlobalDefaultDeadtime 1.3.6.1.4.1.89.80.4 integer read-write
Number of minutes that any RADIUS server is ignored after it has failed. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultDeadtime is false.
       rlRadiusGlobalDefaultKey 1.3.6.1.4.1.89.80.5 displaystring read-write
Secret key to be shared with this RADIUS server. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultKey is false.
       rlRadiusGlobalDefaultSource 1.3.6.1.4.1.89.80.6 ipaddress read-write
IPv4 address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. This MIB is used if the value of the field rlRadiusServerUseGlobalDefaultSource is false.
       rlRadiusServerTable 1.3.6.1.4.1.89.80.7 no-access
The (conceptual) table listing the RADIUS servers with which the cliient shares a secret.
           rlRadiusServerEntry 1.3.6.1.4.1.89.80.7.1 no-access
An entry (conceptual row) representing a RADIUS server with which the client shares a secret.
               rlRadiusServerAddress 1.3.6.1.4.1.89.80.7.1.1 ipaddress read-write
The IP address of the RADIUS server referred to in this table entry.
               rlRadiusServerAuthPortNumber 1.3.6.1.4.1.89.80.7.1.2 integer read-write
The UDP port the client is using to send authentication requests to this server.
               rlRadiusServerAcctPortNumber 1.3.6.1.4.1.89.80.7.1.3 integer read-write
The UDP port the client is using to send accounting requests to this server.
               rlRadiusServerTimeout 1.3.6.1.4.1.89.80.7.1.4 integer read-write
The maximum time (in seconds) to wait for this RADIUS server to reply. Value of 0 means that rlRadiusGlobalDefaultTimeout.
               rlRadiusServerRetries 1.3.6.1.4.1.89.80.7.1.5 integer read-write
The number of times to try contacting this RADIUS server. Value of 0 means that rlRadiusGlobalDefaultRetries.
               rlRadiusServerDeadtime 1.3.6.1.4.1.89.80.7.1.6 integer read-write
Number of minutes that any RADIUS server is ignored after it has failed. Value of 2001 means that rlRadiusGlobalDefaultDeadtime will be used.
               rlRadiusServerUseGlobalDefaultKey 1.3.6.1.4.1.89.80.7.1.7 truthvalue read-write
If this field is set to true the value in field rlRadiusServerKey is ignored and instead the value in the MIB rlRadiusGlobalDefaultKey is used. Otherwise the value in rlRadiusServerKey is used.
               rlRadiusServerKey 1.3.6.1.4.1.89.80.7.1.8 displaystring read-write
Secret key to be shared with this RADIUS server.
               rlRadiusServerSource 1.3.6.1.4.1.89.80.7.1.9 ipaddress read-write
IP address of the interface to use with this server. A value of 0.0.0.0 for this object disables source address specification. Default value of 255.255.255.255 means that rlRadiusGlobalDefaultSource will be used.
               rlRadiusServerPriority 1.3.6.1.4.1.89.80.7.1.10 integer read-write
Determines the order in which the servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table).
               rlRadiusServerStatus 1.3.6.1.4.1.89.80.7.1.11 rowstatus read-write
               rlRadiusServerUsage 1.3.6.1.4.1.89.80.7.1.12 integer read-write
Determines actions for which the radius server will be used. Enumeration: 'all': 3, 'portAuthentication': 2, 'wirelessAuthentication': 4, 'userAuthentication': 1.
       rlRadiusServerInetTable 1.3.6.1.4.1.89.80.8 no-access
The (conceptual) table listing the RADIUS servers with which the cliient shares a secret.
           rlRadiusServerInetEntry 1.3.6.1.4.1.89.80.8.1 no-access
An entry (conceptual row) representing a RADIUS server with which the client shares a secret.
               rlRadiusServerInetAddressType 1.3.6.1.4.1.89.80.8.1.1 inetaddresstype read-write
The Inet address type of RADIUS server reffered to in this table entry .IPv6Z type is not supported.
               rlRadiusServerInetAddress 1.3.6.1.4.1.89.80.8.1.2 inetaddress read-write
The Inet address of the RADIUS server referred to in this table entry.Only one instance of specified address can be added at the same time.
               rlRadiusServerInetAuthPortNumber 1.3.6.1.4.1.89.80.8.1.3 integer read-write
The UDP port the client is using to send authentication requests to this server.The zero value can be used only if rlRadiusServerInetAcctPortNumber value is not zero.
               rlRadiusServerInetAcctPortNumber 1.3.6.1.4.1.89.80.8.1.4 integer read-write
The UDP port the client is using to send accounting requests to this server.The zero value can be used only if rlRadiusServerInetAuthPortNumber value is not zero.
               rlRadiusServerInetTimeout 1.3.6.1.4.1.89.80.8.1.5 integer read-write
The maximum time (in seconds) to wait for this RADIUS server to reply. Value of 0 means that rlRadiusGlobalDefaultTimeout.
               rlRadiusServerInetRetries 1.3.6.1.4.1.89.80.8.1.6 integer read-write
The number of times to try contacting this RADIUS server. Value of 0 means that rlRadiusGlobalDefaultRetries.
               rlRadiusServerInetDeadtime 1.3.6.1.4.1.89.80.8.1.7 integer read-write
Number of minutes that any RADIUS server is ignored after it has failed. Value of 2001 means that rlRadiusGlobalDefaultDeadtime will be used.
               rlRadiusServerInetUseGlobalDefaultKey 1.3.6.1.4.1.89.80.8.1.8 truthvalue read-write
If this field is set to true the value in field rlRadiusServerKey is ignored and instead the value in the MIB rlRadiusGlobalDefaultKey is used. Otherwise the value in rlRadiusServerKey is used.
               rlRadiusServerInetKey 1.3.6.1.4.1.89.80.8.1.9 displaystring read-write
Secret key to be shared with this RADIUS server.
               rlRadiusServerInetSourceType 1.3.6.1.4.1.89.80.8.1.10 inetaddresstype read-write
The rlRadiusServerInetSource address type. IPv6Z type not supported
               rlRadiusServerInetSource 1.3.6.1.4.1.89.80.8.1.11 inetaddress read-write
Inet address of the interface to use with this server. To provide backward compatibility the value of 0.0.0.0 for this object will be used to disables source address specification. Default value of 255.255.255.255 means that rlRadiusGlobalDefaultSource will be used for Ipv4 servers and rlRadiusIPv6GlobalDefaultSource will be used for Ipv6 servers.IPv6Z type not supported. Only valid IP address will be used. Application will set default value.
               rlRadiusServerInetPriority 1.3.6.1.4.1.89.80.8.1.12 integer read-write
Determines the order in which the servers will be used, when 0 is the highest priority. If more than one server share the same priority - they will be used in lexicgoraphic order (the order of entries in this table).
               rlRadiusServerInetStatus 1.3.6.1.4.1.89.80.8.1.13 rowstatus read-write
               rlRadiusServerInetUsage 1.3.6.1.4.1.89.80.8.1.14 integer read-write
Determines actions for which the radius server will be used. WirelessAuthentication will be used if wireless is supported. Enumeration: 'all': 3, 'portAuthentication': 2, 'wirelessAuthentication': 4, 'userAuthentication': 1.
               rlRadiusServerInetLastResponseTime 1.3.6.1.4.1.89.80.8.1.15 timestamp read-only
The value of sysUpTime at the time this server has response. If there is no request to the server, this object contains a zero value.
       rlRadiusGlobalIPv6DefaultSource 1.3.6.1.4.1.89.80.9 inetaddressipv6 read-write
IPv6 address of the interface to use with this server. A NULL value for this object disables source address specification.
       rlAAAEapMethodListTable 1.3.6.1.4.1.89.97.1 no-access
The table specifies all methods list per method name.
           rlAAAEapMethodListEntry 1.3.6.1.4.1.89.97.1.1 no-access
The row definition for this table.
               rlAAAEapMethodListName 1.3.6.1.4.1.89.97.1.1.1 displaystring read-write
Line Method List Name
               rlAAAEapMethodType1 1.3.6.1.4.1.89.97.1.1.2 rlaaaeapmethodtype read-write
first method type that will be used in the method linked list.
               rlAAAEapMethodType2 1.3.6.1.4.1.89.97.1.1.3 rlaaaeapmethodtype read-write
second method type that will be used in the method linked list.
               rlAAAEapMethodType3 1.3.6.1.4.1.89.97.1.1.4 rlaaaeapmethodtype read-write
3th method type that will be used in the method linked list.
               rlAAAEapMethodType4 1.3.6.1.4.1.89.97.1.1.5 rlaaaeapmethodtype read-write
4th method type that will be used in the method linked list.
               rlAAAEapMethodType5 1.3.6.1.4.1.89.97.1.1.6 rlaaaeapmethodtype read-write
5th method type that will be used in the method linked list.
               rlAAAEapMethodListStatus 1.3.6.1.4.1.89.97.1.1.7 rowstatus read-write
method list status can be destroy or createAndGo
       rlAAAEapCurrentMethodList 1.3.6.1.4.1.89.97.2 displaystring read-write
Specifies the method list that will be used for authentication.