DT1-MIB: View SNMP OID List / Download MIB

VENDOR: UTSTARCOM INCORPORATED


 Home MIB: DT1-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usr 1.3.6.1.4.1.429
         nas 1.3.6.1.4.1.429.1
             dt1 1.3.6.1.4.1.429.1.3
                 dt1Id 1.3.6.1.4.1.429.1.3.1
                     dt1IdTable 1.3.6.1.4.1.429.1.3.1.1 no-access
A table that contains information that identifies the hardware and software that make up the specified dual T1 card.
                         dt1IdEntry 1.3.6.1.4.1.429.1.3.1.1.1 no-access
There is one entry in this table for every dual T1 card in the chassis.
                             dt1IdIndex 1.3.6.1.4.1.429.1.3.1.1.1.1 integer read-only
An index that uniquely identifies the dual T1 card for which this row in the table pertains. The value of this index matches the value of the index for the corresponding entity in the entity table of the chassis MIB.
                             dt1IdHardwareSerNum 1.3.6.1.4.1.429.1.3.1.1.1.2 displaystring read-only
The dual T1 card's hardware serial number as stored in EEPROM.
                             dt1IdHardwareRev 1.3.6.1.4.1.429.1.3.1.1.1.3 displaystring read-only
The hardware revision of the specified dual T1 card as stored in its EEPROM.
                             dt1IdSoftwareRev 1.3.6.1.4.1.429.1.3.1.1.1.4 displaystring read-only
The revision of the software being executed in the specified dual T1 card.
                 dt1Cfg 1.3.6.1.4.1.429.1.3.2
                     dt1CfgTable 1.3.6.1.4.1.429.1.3.2.1 no-access
The Dual T1 Card Configuration Table contains an entry for each of the manageable Dual T1 Cards in the chassis. It contains objects that reflect the current configuration of parameters that affect the operation of all the entities that reside on the given card.
                         dt1CfgEntry 1.3.6.1.4.1.429.1.3.2.1.1 no-access
There is one Dual T1 Card Configuration table entry per Dual T1 Card in the chassis.
                             dt1CfgIndex 1.3.6.1.4.1.429.1.3.2.1.1.1 integer read-only
A unique value for each Dual T1 Card in the chassis. The value of dt1CfgIndex matches the value of the index for the corresponding Dual T1 Card entity in the entity table of the chassis MIB.
                             dt1CfgSpanATmgSrcPrio 1.3.6.1.4.1.429.1.3.2.1.1.2 integer read-write
Identifies the priority at which the clock recovered from span line A is to be used as this Dual T1 Card's transmit timing source. Enumeration: 'high': 2, 'medium': 4, 'mediumHigh': 3, 'low': 5, 'notAllowed': 1.
                             dt1CfgSpanBTmgSrcPrio 1.3.6.1.4.1.429.1.3.2.1.1.3 integer read-write
Identifies the priority at which the clock recovered from span line B is to be used as this Dual T1 Card's transmit timing source. Enumeration: 'high': 2, 'medium': 4, 'mediumHigh': 3, 'low': 5, 'notAllowed': 1.
                             dt1CfgInternTmgSrcPrio 1.3.6.1.4.1.429.1.3.2.1.1.4 integer read-write
Identifies the priority at which this Dual T1 Card's internal clock is to be used as the transmit timing source. Enumeration: 'high': 2, 'medium': 4, 'mediumHigh': 3, 'low': 5, 'notAllowed': 1.
                             dt1CfgTdmBusTmgSrcPrio 1.3.6.1.4.1.429.1.3.2.1.1.5 integer read-only
Identifies the priority at which the clock currently on the TDM bus is to be used as this Dual T1 Card's transmit timing source. Enumeration: 'high': 2, 'medium': 4, 'mediumHigh': 3, 'low': 5, 'notAllowed': 1.
                             dt1CfgIdleDiscPatt 1.3.6.1.4.1.429.1.3.2.1.1.6 integer read-write
Idle disconnect pattern sent to the modems. Normal values: USA = 1, international = 84. Default = 1. Configure the modems identically. Consult the help screen, user manual or US Robotics before changing.
                             dt1CfgNumT1TypeNacs 1.3.6.1.4.1.429.1.3.2.1.1.7 integer read-write
The number of T1 and/or T1/E1-PRI NACs in the chassis. Default=multiple(3). Enumeration: 'single': 2, 'notSupported': 1, 'multiple': 3.
                             dt1CfgCallEventFilter 1.3.6.1.4.1.429.1.3.2.1.1.8 integer read-write
This objects provides a means to filter the types of call event traps generated. It specifies the class of calls to filter out. Default = filterOutSuccess(4). Enumeration: 'filterOutNone': 2, 'filterOutBoth': 3, 'notSupported': 1, 'filterOutFailure': 5, 'filterOutSuccess': 4.
                             dt1CfgSetDs0OutofService 1.3.6.1.4.1.429.1.3.2.1.1.9 integer read-write
This object determines to put DS0s out of service upon removal Quad Modem NAC when fixed modem routing method is engaged. Default = disable(2). Enumeration: 'enable': 1, 'disable': 2.
                             dt1CfgWirelessMode 1.3.6.1.4.1.429.1.3.2.1.1.10 integer read-write
This object will configure the wireless mode of operations of the T1 at power up. Default = normal(1). Enumeration: 'wireless': 2, 'normal': 1.
                 dt1Stat 1.3.6.1.4.1.429.1.3.3
                     dt1StatTable 1.3.6.1.4.1.429.1.3.3.1 no-access
The Dual T1 Card Status table contains an entry for each of the manageable Dual T1 Cards in the chassis. It contains objects that reflect the current card specific status. Status values dynamically change during calls, and they are read-only.
                         dt1StatEntry 1.3.6.1.4.1.429.1.3.3.1.1 no-access
There is one Dual T1 Card Status entry per Dual T1 Card in the chassis.
                             dt1StatIndex 1.3.6.1.4.1.429.1.3.3.1.1.1 integer read-only
A unique value for each Dual T1 Card in the chassis. The value of dt1StatusIndex matches the value of the index for the corresponding Dual T1 Card's entry in the entity table of the chassis MIB.
                             dt1StatCurrentTmgSrc 1.3.6.1.4.1.429.1.3.3.1.1.2 integer read-only
Based on the availability of the various timing sources and the current settings of the priorities at which they are to be used, the Dual T1 Card will select the current transmit timing source. This object will indicate the current timing source being used for transmit timing. Enumeration: 'spanLineB': 2, 'spanLineA': 1, 'tdmBusClock': 4, 'internalClock': 3.
                             dt1StatSelfTest 1.3.6.1.4.1.429.1.3.3.1.1.3 integer read-only
This object contains the result of the last self test command requested from the command table. It includes both destructive and non destructive results.
                             dt1StatUpTime 1.3.6.1.4.1.429.1.3.3.1.1.4 integer read-only
This object contains the uptime of the NAC
                             dt1StatCallEventCode 1.3.6.1.4.1.429.1.3.3.1.1.5 integer read-only
This object contains the definition of the call event codes sent in the call event trap. Enumeration: 'digitalBlocked': 22, 'modemSetupTimeout': 9, 'igwSetupTimeout': 12, 'noFreeBchannel': 27, 'noFreeIGW': 10, 'analogBlocked': 21, 'blocked': 20, 'notSupported': 1, 'outCallArrival': 30, 'inCallArrival': 29, 'usrSetup': 3, 'noFreeTdmts': 13, 'inOutCallCollision': 28, 'calledPartyReject': 19, 'igwRejectCall': 11, 'outOfService': 23, 'noFreeModem': 6, 'modemsNotAllowed': 7, 'callingPartyReject': 18, 'telcoDisconnect': 4, 'busy': 24, 'congestion': 25, 'inCallConnect': 31, 'modemsRejectCall': 8, 'ieReject': 15, 'chidReject': 16, 'setup': 2, 'progReject': 17, 'outCallConnect': 32, 'usrDisconnect': 5, 'protocolError': 26, 'bcReject': 14.
                             dt1StatCallEventQ931Value 1.3.6.1.4.1.429.1.3.3.1.1.6 integer read-only
This object contains the Q931 Call Reference Value sent in the call event trap.
                 dt1Cmd 1.3.6.1.4.1.429.1.3.4
                     dt1CmdTable 1.3.6.1.4.1.429.1.3.4.1 no-access
The Dual T1 Card Command table contains an entry for each of the manageable Dual T1 Cards in the chassis. It provides a means through which to take specific actions on one or more Dual T1 cards in the NAS chassis. The number of entries in this table is given by the value of dt1IdNumber.
                         dt1CmdEntry 1.3.6.1.4.1.429.1.3.4.1.1 no-access
There is one Dual T1 Card Command entry per Dual T1 Card in the chassis.
                             dt1CmdIndex 1.3.6.1.4.1.429.1.3.4.1.1.1 integer read-only
A unique value for each Dual T1 Card in the chassis. The value of this object matches the value of the index of the corresponding Dual T1 Card's entry in the entity table of the chassis MIB.
                             dt1CmdMgtStationId 1.3.6.1.4.1.429.1.3.4.1.1.2 octet string read-write
This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with dt1CmdReqId and dt1CmdResult to detect interference from other MSs.
                             dt1CmdReqId 1.3.6.1.4.1.429.1.3.4.1.1.3 integer read-only
This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this Dual T1 Card. If the request-id is unknown or undefined, this object contains the value zero.
                             dt1CmdFunction 1.3.6.1.4.1.429.1.3.4.1.1.4 integer read-write
This object contains a value which describes the command which is being invoked. Enumeration: 'nonDisruptSelfTest': 5, 'saveToNVRAM': 2, 'forceTdmBusMastership': 9, 'restoreFromNVRAM': 3, 'resetToHiPrioTimingSrc': 8, 'noCommand': 1, 'softwareReset': 7, 'restoreDefaultUIPassword': 12, 'exitSpanToSpanLoopback': 11, 'enterSpanToSpanLoopback': 10, 'disruptSelfTest': 6, 'restoreFromDefault': 4.
                             dt1CmdForce 1.3.6.1.4.1.429.1.3.4.1.1.5 integer read-write
In some cases, the Dual T1 Card may be in a state such that certain commands could adversely affect connections. In such cases, a command request with this object not present or set to noForce will result in a warning. If the operator elects to ignore such warnings, this object can be set to force in a subsequent issue of the command to cause the command to be carried out regardless of its potentially hazzardous effects. Enumeration: 'noForce': 2, 'force': 1.
                             dt1CmdParam 1.3.6.1.4.1.429.1.3.4.1.1.6 octet string read-write
This object contains parameters that are specific to the particular command being issued. In some cases, there will be no aditional parameters required.
                             dt1CmdResult 1.3.6.1.4.1.429.1.3.4.1.1.7 integer read-only
This object contains the result of the most recently requested command or test, or the value none(1) if no commands have been requested since the last reset. Enumeration: 'none': 1, 'success': 2, 'failed': 7, 'unAbleToRun': 5, 'aborted': 6, 'inProgress': 3, 'notSupported': 4.
                             dt1CmdCode 1.3.6.1.4.1.429.1.3.4.1.1.8 integer read-only
The value of this object upon command completion indicates a further description of what went wrong if the command was unsuccessful. In the case of tests, a bit mapped result of each of the sub-tests performed can be found in the status table. Enumeration: 'pendingSoftwareDownload': 73, 'unsupportedCommand': 20, 'deviceDisabled': 22, 'unrecognizedCommand': 6, 'userInterfaceActive': 58, 'noError': 1, 'unable': 2, 'slotEmpty': 8, 'testFailed': 25, 'noResponse': 12.
                 dt1TrapEnaTable 1.3.6.1.4.1.429.1.3.5 no-access
Table containing objects to enable traps on the Dual T1 Cards in the chassis.
                     dt1TrapEnaEntry 1.3.6.1.4.1.429.1.3.5.1 no-access
There is one entry for each Dual T1 Card in the chassis.
                         dt1TrapEnaIndex 1.3.6.1.4.1.429.1.3.5.1.1 integer read-only
A unique index identifying the Dual T1 Card to which the trap enable objects pertain.
                         dt1TrapEnaTxTmgSrcSwitch 1.3.6.1.4.1.429.1.3.5.1.2 integer read-write
An object which enables the SNMP proxy agent to generate a trap upon detection of the Dual T1 Card switching to an alternate transmit timing source. Default = disableAll(2). Enumeration: 'enableTrap': 1, 'enableAll': 4, 'enableLog': 3, 'disableAll': 2.
                         dt1TrapEnaCallEvent 1.3.6.1.4.1.429.1.3.5.1.3 integer read-write
This object enables the generation of an SNMP trap to track calls entering and exiting the NAC. Default = disableAll(2). Enumeration: 'enableTrap': 1, 'enableAll': 4, 'enableLog': 3, 'disableAll': 2.
                         dt1TrapEnaCallArriveEvent 1.3.6.1.4.1.429.1.3.5.1.4 integer read-write
This object enables the generation of an SNMP trap to track call arrivals the NAC. Default = disableAll(2). Enumeration: 'enableTrap': 1, 'enableAll': 4, 'enableLog': 3, 'disableAll': 2.
                         dt1TrapEnaCallConnEvent 1.3.6.1.4.1.429.1.3.5.1.5 integer read-write
This object enables the generation of an SNMP trap to track call connects. Default = disableAll(2). Enumeration: 'enableTrap': 1, 'enableAll': 4, 'enableLog': 3, 'disableAll': 2.
                         dt1TrapEnaCallTermEvent 1.3.6.1.4.1.429.1.3.5.1.6 integer read-write
This object enables the generation of an SNMP trap to track normal call terminations. Default = disableAll(2). Enumeration: 'enableTrap': 1, 'enableAll': 4, 'enableLog': 3, 'disableAll': 2.
                         dt1TrapEnaCallFailEvent 1.3.6.1.4.1.429.1.3.5.1.7 integer read-write
This object enables the generation of an SNMP trap to track failed call terminations. Default = disableAll(2). Enumeration: 'enableTrap': 1, 'enableAll': 4, 'enableLog': 3, 'disableAll': 2.