DS3-3COM-MIB: View SNMP OID List / Download MIB

VENDOR: UTSTARCOM INCORPORATED


 Home MIB: DS3-3COM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usr 1.3.6.1.4.1.429
         nas 1.3.6.1.4.1.429.1
             ds3 1.3.6.1.4.1.429.1.44
                   ds3Cfg 1.3.6.1.4.1.429.1.44.1
                       ds3CfgTable 1.3.6.1.4.1.429.1.44.1.1 no-access
The DS3 Configuration Table.
                           ds3CfgEntry 1.3.6.1.4.1.429.1.44.1.1.1 no-access
An entry in the DS3 Configuration Table.
                               ds3CfgIndex 1.3.6.1.4.1.429.1.44.1.1.1.1 integer read-write
A unique value at the DS3 level in the chassis.
                               ds3CfgXmitLineBuildOut 1.3.6.1.4.1.429.1.44.1.1.1.2 integer read-write
This object is used to configure the amount of attenuation that is to be applied to the DS3 transmit signal in order to control cross-talk, etc. The settings are for distances of 0-225 feet or 226 to 450 feet. Default=225(1) Enumeration: 'twoHundredTwentyFive': 1, 'fourHundredFifty': 2.
                               ds3CfgMonitorPortSource 1.3.6.1.4.1.429.1.44.1.1.1.3 integer read-write
This object is for designation of monitor port DS1 source. Default=spanLine1(1). Enumeration: 'spanLine22': 22, 'spanLine23': 23, 'spanLine20': 20, 'spanLine21': 21, 'spanLine26': 26, 'spanLine27': 27, 'spanLine24': 24, 'spanLine25': 25, 'spanLine28': 28, 'spanLine19': 19, 'spanLine18': 18, 'spanLine13': 13, 'spanLine12': 12, 'spanLine11': 11, 'spanLine10': 10, 'spanLine17': 17, 'spanLine16': 16, 'spanLine15': 15, 'spanLine14': 14, 'spanBITS': 29, 'spanLine3': 3, 'spanLine2': 2, 'spanLine1': 1, 'spanLine7': 7, 'spanLine6': 6, 'spanLine5': 5, 'spanLine4': 4, 'spanLine9': 9, 'spanLine8': 8.
                   ds3Current 1.3.6.1.4.1.429.1.44.2
                       ds3CurrentTable 1.3.6.1.4.1.429.1.44.2.1 no-access
This table contains various statistics being collected for the current 15 minute interval.
                           ds3CurrentEntry 1.3.6.1.4.1.429.1.44.2.1.1 no-access
An entry in the DS3 current table.
                               ds3CurrentIndex 1.3.6.1.4.1.429.1.44.2.1.1.1 integer read-only
The index value which uniquely identifies the DS3 interface to which this entry is applicable.
                               ds3CurrentFCPs 1.3.6.1.4.1.429.1.44.2.1.1.2 gauge read-only
This object indicates near end path failure count. The count of LOF or AIS events.
                               ds3CurrentFCCPs 1.3.6.1.4.1.429.1.44.2.1.1.3 gauge read-only
This object indicates far end path failure count. The count of Remote Alarm Indication (RAI) events.
                               ds3CurrentSESLs 1.3.6.1.4.1.429.1.44.2.1.1.4 gauge read-only
The object is the counter associated with the number of Severely Errored Seconds on the line.
                               ds3CurrentUASCPs 1.3.6.1.4.1.429.1.44.2.1.1.5 gauge read-only
This object is the counter associated with the number of Unavailable Seconds for the C-bit parity application.
                   ds3Interval 1.3.6.1.4.1.429.1.44.3
                       ds3IntervalTable 1.3.6.1.4.1.429.1.44.3.1 no-access
The DS3 Interval Table contains various statistics collected by each DS3 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified by ds3IntervalNumber) and for one specific interface (identified by ds3IntervalIndex).
                           ds3IntervalEntry 1.3.6.1.4.1.429.1.44.3.1.1 no-access
An entry in the DS3 Interval Table.
                               ds3IntervalIndex 1.3.6.1.4.1.429.1.44.3.1.1.1 integer read-only
The index value which uniquely identifies the DS3 interface to which this entry is applicable.
                               ds3IntervalNumber 1.3.6.1.4.1.429.1.44.3.1.1.2 integer read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completes 23 hours and 45 minutes prior to interval 1.
                               ds3IntervalSESLs 1.3.6.1.4.1.429.1.44.3.1.1.3 gauge read-only
This object is the counter associated with the number of Severely Errored Seconds on the line in the previous 15 minute interval.
                               ds3IntervalCVCPs 1.3.6.1.4.1.429.1.44.3.1.1.4 gauge read-only
This object is the counter associated with the number of near-end path code violations for the C-bit parity application in the previous 15 minute interval.
                               ds3IntervalUASCPs 1.3.6.1.4.1.429.1.44.3.1.1.5 gauge read-only
This object is the counter associated with the number of Unavailable Seconds for the C-bit parity application in the previous 15 minute interval.
                   ds3Total 1.3.6.1.4.1.429.1.44.4
                       ds3TotalTable 1.3.6.1.4.1.429.1.44.4.1 no-access
The DS3 Total Table contains the cumulative sum of the various statics for the 24 hour period preceding the current interval.
                           ds3TotalEntry 1.3.6.1.4.1.429.1.44.4.1.1 no-access
An entry in the DS3 Total Table.
                               ds3TotalIndex 1.3.6.1.4.1.429.1.44.4.1.1.1 integer read-only
The index value which uniquely identifies the DS3 interface to which this entry is applicable.
                               ds3TotalSESLs 1.3.6.1.4.1.429.1.44.4.1.1.2 gauge read-only
This object is the counter associated with the number of Severely Errored Seconds on the line in the previous 24 hour interval. Invalid 15 intervals count as 0.
                               ds3TotalCVCPs 1.3.6.1.4.1.429.1.44.4.1.1.3 gauge read-only
This object is the counter associated with the number of near-end path code violations for the C-bit parity application in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
                               ds3TotalUASCPs 1.3.6.1.4.1.429.1.44.4.1.1.4 gauge read-only
This object is the counter associated with the number of Unavailable Seconds for the C-bit parity application in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
                   ds3TrapEnable 1.3.6.1.4.1.429.1.44.5
                       ds3TrapEnableTable 1.3.6.1.4.1.429.1.44.5.1 no-access
The DS3 Trap eanble table contains the line status change trap enable
                           ds3TrapEnableEntry 1.3.6.1.4.1.429.1.44.5.1.1 no-access
An entry in Ds3 Trap Enable Table
                               ds3TrapEnableIndex 1.3.6.1.4.1.429.1.44.5.1.1.1 integer read-only
An unique value which identifies the DS3.
                               ds3LineStatusChangeTE 1.3.6.1.4.1.429.1.44.5.1.1.2 integer read-write
DS3 Line status change trap enable flag Enumeration: 'enableTrap': 1, 'enableAll': 4, 'enableLog': 3, 'disableAll': 2.
                   ds3TrapObj 1.3.6.1.4.1.429.1.44.6
                       ds3TrapObjTable 1.3.6.1.4.1.429.1.44.6.1 no-access
DS3 Trap obj table is a pace holder for status string
                           ds3TrapObjEntry 1.3.6.1.4.1.429.1.44.6.1.1 no-access
An entry in DS3 Trap Obj table
                               ds3TrapObjIndex 1.3.6.1.4.1.429.1.44.6.1.1.1 integer read-only
An unique value for the index
                               ds3StatusObjString 1.3.6.1.4.1.429.1.44.6.1.1.2 displaystring no-access
For line status string it is a place holder