DPI-LANA-MIB: View SNMP OID List / Download MIB

VENDOR: DIGITAL PRODUCTS


 Home MIB: DPI-LANA-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dpi 1.3.6.1.4.1.901
         dpiProducts 1.3.6.1.4.1.901.1
             dpiLANA 1.3.6.1.4.1.901.1.2
                 lanaInterface 1.3.6.1.4.1.901.1.2.2
                     lanaRs232PortSpeed 1.3.6.1.4.1.901.1.2.2.1 integer read-write
The port's speed. Enumeration: 'b9600': 3, 'b1200': 0, 'b2400': 1, 'b38400': 5, 'b19200': 4, 'b4800': 2.
                     lanaRs232AsyncPortBits 1.3.6.1.4.1.901.1.2.2.2 integer read-write
The number of data bits for the serial port. Enumeration: 'eight': 8, 'seven': 7, 'six': 6, 'five': 5.
                     lanaRs232AsyncPortStopBits 1.3.6.1.4.1.901.1.2.2.3 integer read-write
The number of stop bits for the serial port. Enumeration: 'two': 2, 'one-and-half': 3, 'one': 1.
                     lanaRs232AsyncPortParity 1.3.6.1.4.1.901.1.2.2.4 integer read-write
The parity setting of the serial line. Enumeration: 'even': 3, 'none': 1, 'odd': 2.
                     lanaSubnetMask 1.3.6.1.4.1.901.1.2.2.5 ipaddress read-write
The subnet mask for the LANA unit.
                     lanaDefGatewayIpAddr 1.3.6.1.4.1.901.1.2.2.6 ipaddress read-write
The default gateway IP address for the LANA unit.
                     lanaForwBroadcast 1.3.6.1.4.1.901.1.2.2.7 integer read-write
Indicates whether the SNMP LAN Adapter forwards broadcast datagrams to the SNMP-managed device. The factory default value is disabled (2). Enumeration: 'disabled': 2, 'enabled': 1.
                 lanaMgmt 1.3.6.1.4.1.901.1.2.3
                     lanaReset 1.3.6.1.4.1.901.1.2.3.1 integer read-write
Request for LANA unit to reset. Enumeration: 'one': 1.
                     lanaFactoryDefault 1.3.6.1.4.1.901.1.2.3.2 integer read-write
Request factory default configuration on next unit reset. Enumeration: 'one': 1.
                     lanaUpdateUnit 1.3.6.1.4.1.901.1.2.3.3 integer read-write
Request for LANA unit to initiate TFTP software upgrade using the string `host:filename' where host is in dotted decimal format. Enumeration: 'one': 1.
                     lanaSWMajorVer 1.3.6.1.4.1.901.1.2.3.4 integer read-only
LANA's major software release version number.
                     lanaSWMinorVer 1.3.6.1.4.1.901.1.2.3.5 integer read-only
LANA's minor software release version number.
                     lanaSWRevision 1.3.6.1.4.1.901.1.2.3.6 integer read-only
LANA's software release revision number.
                 lanaNest 1.3.6.1.4.1.901.1.2.4
                     lanaIPAddrTableTotal 1.3.6.1.4.1.901.1.2.4.1 integer read-only
Get the number of entries in LANA's nest ip table.
                     lanaIPAddrTable 1.3.6.1.4.1.901.1.2.4.2 no-access
A list of entries containing IP address information for LANA managed by this system.
                         lanaIPAddrEntry 1.3.6.1.4.1.901.1.2.4.2.1 no-access
An entry containing IP address information for a particular LANA table slot.
                             lanaIPAddrIndex 1.3.6.1.4.1.901.1.2.4.2.1.1 integer read-only
A unique value for each LANA IP address.
                             lanaIPAddr 1.3.6.1.4.1.901.1.2.4.2.1.2 ipaddress read-write
This variable is one of up to 60 IP addresses that LANA will proxy ARP for. The address should be on the same subnet as the attached CSU/DSU in order for ARP to function properly. Reading an IP address with the value 0.0.0.0 represents a cleared/ uninitialized table entry. Setting the IP address to 0.0.0.0 clears the indexed entry.
                     lanaIPAddrTableClear 1.3.6.1.4.1.901.1.2.4.3 integer read-write
Reset all the IP addresses in LANA's address table to 0.0.0.0.