DNOS-DCBX-MIB: View SNMP OID List / Download MIB

VENDOR: DELL INC.


 Home MIB: DNOS-DCBX-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, DELL-REF-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 fastPathDCBX 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58
The MIB definitions Data Center Bridging Exchange Protocol.
       agentDcbxGroup 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1
           agentDcbxTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1 no-access
A table providing configuration of DCBX per interface.
               agentDcbxEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1.1 no-access
DCBX configuration for a port.
                   agentDcbxIntfIndex 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1.1.1 interfaceindex no-access
This is a unique index for an entry in the agentDcbxTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable.
                   agentDcbxAutoCfgPortRole 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1.1.2 dcbxportrole read-write
Ports operating in the manual role do not have their configuration affected by peer devices or by internal propagation of configuration. These ports will advertise their configuration to their peer if DCBX is enabled on that port. Auto-up: Advertises a configuration, but is also willing to accept a configuration from the link-partner and propagate it internally to the auto-downstream ports as well as receive configuration propagated internally by other auto-upstream ports. Auto-down: Advertises a configuration but is not willing to accept one from the link partner. However, the port will accept a configuration propagated internally by the configuration source. Configuration Source:In this role, the port has been manually selected to be the configuration source. Configuration received over this port is propagated to the other auto-configuration ports.
                   agentDcbxVersion 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1.1.3 dcbxversion read-write
CIN is Cisco Intel Nuova DCBX (version 1.0). CEE is converged enhanced ethernet DCBX (version 1.06). IEEE is 802-1 az version. The default value is auto. DCBX supports the legacy implementations v1.0 (CIN) and v1.06 (CEE) in addition to standard IEEE version 2.4 DCBX. 1.DCBX starts in standard IEEE mode by sending an IEEE standard version 2.4 DCBX frame. If the peer responds, then IEEE standard version 2.4 DCBX is used,Starts means after a link up, a DCBX timeout (or multiple peer condition) or when commanded by the network operator. If DCBX receives a DCBX frame with an OUI indicating a legacy version, it immediately switches into legacy mode for the detected version and does not wait for the 3x LLDP fast timeout. 2.If no IEEE DCBX response is received within 3 times the LLDP fast transmit timeout period, DCBX immediately transmits a version 1.06 DCBX frame with the appropriate version number. If DCBX receives a DCBX frame with an OUI indicating IEEE standard support, it immediately switches into IEEE standard mode and does not wait for the timer. If DCBX receives a DCBX frame with an OUI indicating legacy mode and a version number indicating version 1.0 support, it immediately switches into legacy 1.0 mode and does not wait for the timer. 3.If no version 1.06 response is received within 3 times the DCBX fast transmit timeout period, DCBX falls back to version 1.0 and immediately transmits a version 1.0 frame. If no response is received within 3 times the DCBX fast transmit period, DCBX waits the standard LLDP timeout period, and then begins again with step 1. If DCBX receives a DCBX frame with an OUI indicating IEEE standard mode, it immediately switches into IEEE standard mode.
                   agentDcbxSupportedTLVs 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1.1.4 bits read-only
Bitmap that includes the supported set of DCBX LLDP TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network management. Having the bit 'pfc(0)' set indicates that the LLDP transmit PFC TLV as part of DCBX TLVs. Having the bit 'etcConfig(1)' set indicates that the LLDP transmit ETS configuration TLV as part of DCBX TLVs. Having the bit 'etsRecom(2)' set indicates that transmit ETS Recomdenation TLV as part of DCBX TLVs. Having the bit 'applicationPriority(3)' set indicates that the LLDP transmit applicationPriority TLV as part of DCBX TLVs. Bits: 'etsRecom': 2, 'etsConfig': 1, 'pfc': 0, 'applicationPriority': 3.
                   agentDcbxConfigTLVsTxEnable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.1.1.5 bits read-write
Bitmap that includes the DCBX defined set of LLDP TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network management. Having the bit 'pfc(0)' set indicates that the LLDP transmit PFC TLV as part of DCBX TLVs. Having the bit 'etcConfig(1)' set indicates that the LLDP transmit ETS configuration TLV as part of DCBX TLVs. Having the bit 'etsRecom(2)' set indicates that transmit ETS Recomdenation TLV as part of DCBX TLVs. Having the bit 'applicationPriority(3)' set indicates that the LLDP transmit applicationPriority TLV as part of DCBX TLVs. Bits: 'etsRecom': 2, 'etsConfig': 1, 'pfc': 0, 'applicationPriority': 3.
           agentDcbxStatusTable 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2 no-access
.
               agentDcbxStatusEntry 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1 no-access
.
                   agentDcbxOperVersion 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.2 dcbxversion read-only
Specifies the DCBX mode in which the interface is currently operating.
                   agentDcbxPeerMACaddress 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.3 macaddress read-only
MAC Address of the DCBX peer.
                   agentDcbxCfgSource 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.4 integer read-only
Indicates if this port is the source of configuration information for auto-* ports. Enumeration: 'false': 0, 'true': 1.
                   agentDcbxMultiplePeerCount 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.5 unsigned32 read-only
Indicates number of times multiple peers were detected. A duplicate peer is when more than one DCBX peer is detected on a port.
                   agentDcbxPeerRemovedCount 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.6 unsigned32 read-only
.
                   agentDcbxPeerOperVersionNum 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.7 unsigned32 read-only
Specifies the operational version of the peer DCBX device. Valid only when peer device is a CEE/CIN DCBX device.
                   agentDcbxPeerMaxVersion 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.8 unsigned32 read-only
Specifies the max version of the peer DCBX device. Valid only when peer device is CEE/CIN DCBX device.
                   agentDcbxSeqNum 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.9 unsigned32 read-only
Specifies the current sequence number that is sent in DCBX control TLVs in CEE/CIN Mode.
                   agentDcbxAckNum 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.10 unsigned32 read-only
Specifies the current ACK number that is to be sent to peer in DCBX control TLVs in CEE/CIN Mode.
                   agentDcbxPeerRcvdAckNum 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.11 unsigned32 read-only
Specifies the current ACK number that is sent by peer in DCBX control TLV in CEE/CIN Mode.
                   agentDcbxTxCount 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.12 unsigned32 read-only
The number of DCBX frames transmitted per interface.
                   agentDcbxRxCount 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.13 unsigned32 read-only
The number of DCBX frames received per interface.
                   agentDcbxErrorFramesCount 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.14 unsigned32 read-only
The number of DCBX frames discarded due to errors in the frame.
                   agentDcbxUnknownTLVsCount 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.2.1.15 unsigned32 read-only
The number of DCBX (PFC, ETS, Application Priority or other) TLVs not recognized.
           agentDcbxGroupGlobalConfGroup 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.3
               agentDcbxGlobalConfVersion 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.58.1.3.1 dcbxversion read-write
CIN is Cisco Intel Nuova DCBX (version 1.0). CEE is converged enhanced ethernet DCBX (version 1.06). IEEE is 802-1 az version. The default value is auto. DCBX supports the legacy implementations v1.0 (CIN) and v1.06 (CEE) in addition to standard IEEE version 2.4 DCBX. 1.DCBX starts in standard IEEE mode by sending an IEEE standard version 2.4 DCBX frame. If the peer responds, then IEEE standard version 2.4 DCBX is used,Starts means after a link up, a DCBX timeout (or multiple peer condition) or when commanded by the network operator. If DCBX receives a DCBX frame with an OUI indicating a legacy version, it immediately switches into legacy mode for the detected version and does not wait for the 3x LLDP fast timeout. 2.If no IEEE DCBX response is received within 3 times the LLDP fast transmit timeout period, DCBX immediately transmits a version 1.06 DCBX frame with the appropriate version number. If DCBX receives a DCBX frame with an OUI indicating IEEE standard support, it immediately switches into IEEE standard mode and does not wait for the timer. If DCBX receives a DCBX frame with an OUI indicating legacy mode and a version number indicating version 1.0 support, it immediately switches into legacy 1.0 mode and does not wait for the timer. 3.If no version 1.06 response is received within 3 times the DCBX fast transmit timeout period, DCBX falls back to version 1.0 and immediately transmits a version 1.0 frame. If no response is received within 3 times the DCBX fast transmit period, DCBX waits the standard LLDP timeout period, and then begins again with step 1. If DCBX receives a DCBX frame with an OUI indicating IEEE standard mode, it immediately switches into IEEE standard mode.