DNMSALARM-MIB: View SNMP OID List / Download MIB

VENDOR: DYNATECH COMMUNICATIONS


 Home MIB: DNMSALARM-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, DYNATECHCOMMUNICATIONS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dnmsAlarm 1.3.6.1.4.1.384.2.1
     dnmsAlarmEnable 1.3.6.1.4.1.384.2.1.1 integer read-write
The on/off switch for the dnms style alarms as SNMP traps. When enabled, any condition that would generate an alarm in the DynaTech proprietary management systems would instead generate a SNMP style trap. Enumeration: 'disabled': 2, 'enabled': 1.
     dnmsAlarmTable 1.3.6.1.4.1.384.2.1.2 no-access
The table of Dynatech proprietary alarms.
         dnmsAlarmEntry 1.3.6.1.4.1.384.2.1.2.1 no-access
An entry for each of the Dynatech proprietary alarms supported by the product.
             dnmsAlarmEntryIndex 1.3.6.1.4.1.384.2.1.2.1.1 integer read-only
Arbitrary number assigned to each alarm. Not all CPX equipment will support all alarms. Enumeration: 'fcs-err': 7, 'x25-lev1-dn': 1, 'tpad-nak-ex': 29, 'x25-lev3-dn': 5, 'fr-nt1time': 25, 'card-linecrd': 18, 'dev-up': 11, 'card-primstr': 16, 'fr-nt2imte': 26, 'x28-inact': 21, 'cdrlost': 8, 'dev-dn': 12, 'x25-lev1-up': 2, 'tpad-slowPoll': 30, 'card-secmem': 15, 'tpad-normPoll': 31, 'x25-lev3-up': 6, 'x25-lev2-dn': 3, 'stalost': 10, 'dllfail': 24, 'x28-portX28': 19, 'dllinit': 22, 'x25-lev2-up': 4, 'x28-portPkt': 20, 'card-primem': 14, 'psufail': 13, 'tpad-CD-up': 33, 'tpad-CD-down': 32, 'fr-invmsg': 28, 'almlost': 9, 'dllok': 23, 'fr-nn4count': 27, 'card-secmstr': 17.
             dnmsAlarmEntryEnable 1.3.6.1.4.1.384.2.1.2.1.2 integer read-write
Each alarm can be enabled/disabled individually. This is expected to matter more as equivalent SNMP style traps are implemented in MIBS for CPX boxes. The overlapping traps (e.g. rfc1215's linkDown and linkUp overlapping the X25 link down and ups) could result in superfluous trap messages. These can be avoided by selectively disabling some of these traps. Enumeration: 'enable': 1, 'disable': 2.
             dnmsAlarmEntryDescr 1.3.6.1.4.1.384.2.1.2.1.3 displaystring read-only
Textual Description of the alarm condition.
       dnmsAlarmTrap 1.3.6.1.4.1.384.2.10.1
An SNMP Trap to encapsulate the Dynatech Communications DN25 style alarms into an SNMP managed environment.