DLINKSW-PORT-SECURITY-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DLINKSW-PORT-SECURITY-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, DLINK-ID-REC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dlinkSwPortSecurityMIB 1.3.6.1.4.1.171.14.8
This MIB module defines objects for port security.
     dPortSecNotifications 1.3.6.1.4.1.171.14.8.0
         dPortSecMacAddrViolation 1.3.6.1.4.1.171.14.8.0.1
The address violation notification is generated when port security address violation is detected (dPortSecIfViolationCount increases).
     dPortSecObjects 1.3.6.1.4.1.171.14.8.1
         dPortSecGlobalNotifControl 1.3.6.1.4.1.171.14.8.1.1 truthvalue read-write
Set to 'true' to enable global SNMP Notification for port security feature. Setting the object to 'false' will disable SNMP notifications.
         dPortSecGlobalNotifRate 1.3.6.1.4.1.171.14.8.1.2 unsigned32 read-write
Expressed in the number of notifications can be generated per second. The global control configures the rate-limit of SNMP Notification for port security feature. This object specifies the rate at which SNMP Notification is generated when dPortSecIfViolationCount increases. When the rate is over the configured rate, the SNMP Notification is suppressed but it does not affect dPortSecIfViolationCount. A value of 0 indicates that an SNMP Notification is generated for every security violation.
         dPortSecNotifyInfo 1.3.6.1.4.1.171.14.8.1.3
             dPortSecIfViolationMacAddress 1.3.6.1.4.1.171.14.8.1.3.1 macaddress no-access
This object is also used as a variable in the dPortSecMacAddrViolation notification to contain the value of the MAC address which caused the violation.
         dPortSecGlobalMaximumNum 1.3.6.1.4.1.171.14.8.1.4 integer32 read-write
Indicates the system maximum addresses number (users) allowed. A value of -1 means no-limit. The max entry range is (1..N). The value N means the max number and is determined by the project itself.
         dPortSecVlanTable 1.3.6.1.4.1.171.14.8.1.5 no-access
The table is used to configure and display port security settings and status for a particular VLAN.
             dPortSecVlanEntry 1.3.6.1.4.1.171.14.8.1.5.1 no-access
An entry contains port security information for a particular VLAN.
                 dPortSecVlanID 1.3.6.1.4.1.171.14.8.1.5.1.1 vlanid no-access
This object specifies the VLAN ID for address learning.
                 dPortSecVlanMaximumNum 1.3.6.1.4.1.171.14.8.1.5.1.2 integer32 read-write
Indicates the VLAN maximum addresses number (users) allowed. A value of -1 means no-limit. The range is (1..N). The value N means the upper limit and is determined by the project itself.
                 dPortSecVlanCurrentNum 1.3.6.1.4.1.171.14.8.1.5.1.3 unsigned32 read-only
Indicates the current number of secure MAC addresses on this VLAN.
         dPortSecIfTable 1.3.6.1.4.1.171.14.8.1.6 no-access
The table is used to configure and display port security settings and status for a particular interface.
             dPortSecIfEntry 1.3.6.1.4.1.171.14.8.1.6.1 no-access
Entry containing port security information for a particular interface.
                 dPortSecIfEnable 1.3.6.1.4.1.171.14.8.1.6.1.1 truthvalue read-write
Uses the object to enable or disable port security.
                 dPortSecIfCurrentStatus 1.3.6.1.4.1.171.14.8.1.6.1.2 integer read-only
This object represents the operational status of the port security feature on an interface. notEnabled(1) - This indicates port security is not enabled. forwarding(2) - This indicates port security is operational. errDisabled(3) - This indicates that the port is shutdown due to port security violation when the object dPortSecIfViolationAction is of type 'shutdown'. Enumeration: 'forwarding': 2, 'notEnabled': 1, 'errDisabled': 3.
                 dPortSecIfMaximumNum 1.3.6.1.4.1.171.14.8.1.6.1.3 unsigned32 read-write
This object sets the maximum number of secure MAC addresses (users) allowed.
                 dPortSecIfViolationAction 1.3.6.1.4.1.171.14.8.1.6.1.4 integer read-write
This object sets the action to be taken when a security violation is detected. protect(1) - Drops all the packets from the insecure hosts at the port-security process level but does not increment the security-violation count. restrict(2) - Drops all packets from the insecure hosts at the port-security process level and increments the security-violation count. shutdown(3) - Shuts down the port if there is a security violation. Enumeration: 'restrict': 2, 'protect': 1, 'shutdown': 3.
                 dPortSecIfSecureMode 1.3.6.1.4.1.171.14.8.1.6.1.5 integer read-write
Use the object to set the port security mode. permanent(1) - Under this mode all learned MAC addresses won't be purged unless a user deletes these entries manually. deleteOnTimeout(2) - Under this mode all learned MAC addresses will be purged when an entry ages out or a user deletes these entries manually. Enumeration: 'permanent': 1, 'deleteOnTimeout': 2.
                 dPortSecIfAgingTime 1.3.6.1.4.1.171.14.8.1.6.1.6 integer read-write
Use the object to set aging time for auto-learned dynamic secured address. When 0 is set on the specified interface, it means the port security aging has been disabled.
                 dPortSecIfAgingType 1.3.6.1.4.1.171.14.8.1.6.1.7 integer read-write
Use the object to set aging type for auto-learned dynamic secured address. absolute(1) - Under this aging type, all the secured address on this interface will age out exactly after the time specified. inactivity(2) - Under this aging type, all learned MAC addresses on this interface will age out only if there is no data traffic from the secure source address for the specified time period. Enumeration: 'inactivity': 2, 'absolute': 1.
                 dPortSecIfClearDynamicAddr 1.3.6.1.4.1.171.14.8.1.6.1.8 integer read-write
Setting this object to 'clear' to clear the addresses which will be purged out when an entry is aged out on the corresponding interface. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned. Enumeration: 'clear': 1, 'noOp': 2.
                 dPortSecIfCurrentNum 1.3.6.1.4.1.171.14.8.1.6.1.9 unsigned32 read-only
Indicates the current number of secure MAC addresses on this interface.
                 dPortSecIfViolationCount 1.3.6.1.4.1.171.14.8.1.6.1.10 counter64 read-only
Indicates the number of address violations occurred on a secure interface. The counter will be initialized to zero when the port security feature is enabled on an interface.
         dPortSecAddrTableCurrentNum 1.3.6.1.4.1.171.14.8.1.7 unsigned32 read-only
This object indicates the number of entries present in the dPortSecAddrTable.
         dPortSecAddrTable 1.3.6.1.4.1.171.14.8.1.8 no-access
A list of port security entries containing the secure MAC address information.
             dPortSecAddrEntry 1.3.6.1.4.1.171.14.8.1.8.1 no-access
An entry contains secure MAC address information for a particular interface. A secure MAC address can be added by the user and can be added when the device learns a new secure MAC address.
                 dPortSecAddrIfIndex 1.3.6.1.4.1.171.14.8.1.8.1.1 interfaceindex no-access
The ifIndex value of the interface.
                 dPortSecAddrVlanID 1.3.6.1.4.1.171.14.8.1.8.1.2 vlanidornone no-access
This object specifies the VLAN ID where the user-defined secure MAC address is located. If this object is set to 0 at row creation time, the PVID (default port VLAN ID) will be used for the MAC address.
                 dPortSecAddrMacAddress 1.3.6.1.4.1.171.14.8.1.8.1.3 macaddress no-access
This object indicates the secure MAC address to gain port access rights.
                 dPortSecAddrSecureMode 1.3.6.1.4.1.171.14.8.1.8.1.4 integer read-only
Specifies the secure mode. For manually configured secure MAC addresses, the dPortSecAddrSecureMode is permanent. Enumeration: 'permanent': 1, 'deleteOnTimeout': 2.
                 dPortSecAddrRemainTime 1.3.6.1.4.1.171.14.8.1.8.1.5 integer read-only
Specifies the remaining aging time for the auto-learned dynamic secured address.
                 dPortSecAddrRowStatus 1.3.6.1.4.1.171.14.8.1.8.1.99 rowstatus read-only
The status of this conceptual row. This object is used to create and delete instances of this table. In other words, besides 'permanent' secure MAC address, a 'deleteOnTimeout' address can be cleared by this object.
     dPortSecConformance 1.3.6.1.4.1.171.14.8.2
         dPortSecMIBCompliances 1.3.6.1.4.1.171.14.8.2.1
             dPortSecMIBCompliance 1.3.6.1.4.1.171.14.8.2.1.1
The compliance statement for the Port Security MIB.
         dPortSecMIBGroups 1.3.6.1.4.1.171.14.8.2.2
             dPortSecIfCfgGroup 1.3.6.1.4.1.171.14.8.2.2.1
A collection of objects for configuring port security feature.
             dPortSecIfStatusGroup 1.3.6.1.4.1.171.14.8.2.2.2
A collection of objects providing the counter information for the port security feature.
             dPortSecAddrGroup 1.3.6.1.4.1.171.14.8.2.2.3
A collection of objects providing the address information for the port security feature.
             dPortSecAddrNumCtrlGroup 1.3.6.1.4.1.171.14.8.2.2.4
A collection of objects provides the configuration of the maximum secure MAC address number on system or VLAN specific.
             dPortSecNotifEnableGroup 1.3.6.1.4.1.171.14.8.2.2.5
A collection of object(s) that provides control over port security related notification(s).
             dPortSecNotifGroup 1.3.6.1.4.1.171.14.8.2.2.6
A collection of notifications providing information about address violation.