DLINKSW-L2FDB-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DLINKSW-L2FDB-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dlinkSwL2FdbMIB 1.3.6.1.4.1.171.14.3
This MIB module defines objects for L2FDB.
     dL2FdbMIBNotifications 1.3.6.1.4.1.171.14.3.0
         dL2FdbMacNotification 1.3.6.1.4.1.171.14.3.0.1
This trap indicates a MAC address is added to or removed from the address table.
     dL2FdbMIBObjects 1.3.6.1.4.1.171.14.3.1
         dL2FdbGblCtrl 1.3.6.1.4.1.171.14.3.1.1
             dL2FdbClearCtrl 1.3.6.1.4.1.171.14.3.1.1.1
                 dL2FdbClearMacAddrByMacAddr 1.3.6.1.4.1.171.14.3.1.1.1.1 macaddress read-write
This object specifies a MAC address which will be cleared. When read, a value of '000000000000'H is returned.
                 dL2FdbClearMacAddrByIf 1.3.6.1.4.1.171.14.3.1.1.1.2 interfaceindexorzero read-write
This object indicates the ifIndex of the physical port/port-channel/vlan interface on which the dynamic MAC address(es) will be cleared. When read, a value of 0 is returned.
                 dL2FdbClearAllMacAddr 1.3.6.1.4.1.171.14.3.1.1.1.3 integer read-write
This object clears all of the dynamic FDB entries, when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned. Enumeration: 'clear': 1, 'noOp': 2.
             dL2FdbAgingTime 1.3.6.1.4.1.171.14.3.1.1.2 unsigned32 read-write
Specify the aging time in seconds. The valid range is 5 to 1000000 seconds. The special valie of 0 indicates the ging out function is disabled.
             dL2FdbMacChangeEnabled 1.3.6.1.4.1.171.14.3.1.1.3 truthvalue read-write
This object indicates the status of MAC address notification feature on the Switch.
             dL2FdbMacChangeNotifInterval 1.3.6.1.4.1.171.14.3.1.1.4 unsigned32 read-write
Specifies the interval between two consecutive MAC address change notifications.
             dL2FdbMacChangeNotifyEnabled 1.3.6.1.4.1.171.14.3.1.1.5 truthvalue read-write
Indicates whether cmnMacChangedNotification notifications will or will not be sent when there are MAC addresses learnt or removed from the forwarding table.
             dL2FdbMacChangeHistorySize 1.3.6.1.4.1.171.14.3.1.1.6 unsigned32 read-write
Specifies the maximum number of the entries in the MAC history notification table.
             dL2FdbDestHitEnabled 1.3.6.1.4.1.171.14.3.1.1.7 truthvalue read-write
This object indicates the state whether the destination MAC address will trigger update function.
         dL2FdbStaticUnicastTable 1.3.6.1.4.1.171.14.3.1.2 no-access
This table contains a list of configuration for static unicast MAC addresses.
             dL2FdbStaticUnicastEntry 1.3.6.1.4.1.171.14.3.1.2.1 no-access
A table entry represents configuration for a static unicast MAC address information.
                 dL2FdbStaticUnicastVlanID 1.3.6.1.4.1.171.14.3.1.2.1.1 vlanid no-access
The VLAN ID of the entry.
                 dL2FdbStaticUnicastMacAddr 1.3.6.1.4.1.171.14.3.1.2.1.2 macaddress no-access
The MAC address of the entry.
                 dL2FdbStaticUnicastType 1.3.6.1.4.1.171.14.3.1.2.1.3 integer read-only
This object indicates the status of this entry. self(1) - This entry is currently in use by the device's MAC address. permanent(2) - This entry is currently in use and will remain so until after the next reset of the device. permanentDrop(3) - This entry will filter the packet with the specified MAC address as the source MAC or as the destination MAC. The entry is currently in use and will remain so after the next reboot of the device. The value of this object MUST be retained across reinitializations of the management system. Enumeration: 'self': 1, 'permanent': 2, 'permanentDrop': 3.
                 dL2FdbStaticUnicastPortNum 1.3.6.1.4.1.171.14.3.1.2.1.4 integer32 read-only
The port number of the static unicast address. The value of 0 indicates the CPU port. The value of -1 indicates mac filter entry with permanentDrop type.
                 dL2FdbStaticUnicastRowStatus 1.3.6.1.4.1.171.14.3.1.2.1.5 rowstatus read-only
This object indicates the RowStatus of this entry.
         dL2FdbIfCtrlTable 1.3.6.1.4.1.171.14.3.1.3 no-access
This table contains a list of interface-specific configuration for L2 FDB.
             dL2FdbIfCtrlEntry 1.3.6.1.4.1.171.14.3.1.3.1 no-access
An entry represents interface L2 FDB configuration.
                 dL2FdbIfCtrlNotifyEnable 1.3.6.1.4.1.171.14.3.1.3.1.1 bits read-write
This object indicates whether a specified notification is enabled or not. If a bit corresponding to a notification is set to 1, then the specified notification can be generated. added(0) - the MAC change notification when a MAC address is added on the interface. removed(1) - the MAC change notification when a MAC address is removed from the interface. Bits: 'removed': 1, 'added': 0.
                 dL2FdbIfMacLearningEnabled 1.3.6.1.4.1.171.14.3.1.3.1.2 truthvalue read-write
This object indicates whether the MAC-address learning is enabled or not on the physical interface.
         dL2FdbMulticastFilterModeTable 1.3.6.1.4.1.171.14.3.1.4 no-access
This table contains a list of multicast filter mode configuration of interfaces. Only applicable interfaces will present on this table.
             dL2FdbMulticastFilterModeEntry 1.3.6.1.4.1.171.14.3.1.4.1 no-access
An entry represents multicast filter mode on an interface.
                 dL2FdbMcastFilterModeIfIndex 1.3.6.1.4.1.171.14.3.1.4.1.1 interfaceindex no-access
This object indicates the ifIndex of the interface. If support vlan-based filtering mode: The valid interfaces are VLANs. If support port-based filtering mode: The valid interfaces are physical port.
                 dL2FdbMcastFilterMode 1.3.6.1.4.1.171.14.3.1.4.1.2 integer read-write
This object indicates the handling method for multicast packets on the corresponding interface. Enumeration: 'forwardUnregistered': 2, 'forwardAll': 1, 'filterUnregistered': 3.
         dL2FdbMacChangeHistoryTable 1.3.6.1.4.1.171.14.3.1.5 no-access
This table contains a list of MAC address change history.
             dL2FdbMacChangeHistoryEntry 1.3.6.1.4.1.171.14.3.1.5.1 no-access
An entry represents a MAC address change.
                 dL2FdbMacChangeHistoryIndex 1.3.6.1.4.1.171.14.3.1.5.1.1 unsigned32 no-access
This object is history index.
                 dL2FdbMacChangeHistoryOp 1.3.6.1.4.1.171.14.3.1.5.1.2 integer read-only
mac notify change operation 1 - learned a new MAC address 2 - deleted an old MAC address Enumeration: 'removed': 2, 'added': 1.
                 dL2FdbMacChangeHistoryVlanID 1.3.6.1.4.1.171.14.3.1.5.1.3 vlanid read-only
The VLAN ID of the entry.
                 dL2FdbMacChangeHistoryMacAddr 1.3.6.1.4.1.171.14.3.1.5.1.4 macaddress read-only
The MAC address of the entry.
                 dL2FdbMacChangeHistoryPortNum 1.3.6.1.4.1.171.14.3.1.5.1.5 integer32 read-only
The port number of the unicast address.
         dL2FdbNotifyInfo 1.3.6.1.4.1.171.14.3.1.6
             dL2FdbMacChangeNotifyInfo 1.3.6.1.4.1.171.14.3.1.6.1 octet string no-access
This object indicates the information for the device MAC address changes. And the detailed information include: Operation Code + MAC address + Box ID (or slot ID) + Port Number + Zero... Operation Code: 1, 2 1 means learned a new MAC address 2 means deleted an old MAC address. Box ID: The switch box ID, for standalone device, it always 1. Port Number: The hysical port/port-channellearned or deleted for the box,if port-channel, the box id is invalid Zero: Used to separate each message(Operate Code + MAC address + Box ID + Port Number).
     dL2FdbMIBConformance 1.3.6.1.4.1.171.14.3.2
         dL2FdbCompliances 1.3.6.1.4.1.171.14.3.2.1
             dL2FdbCompliance 1.3.6.1.4.1.171.14.3.2.1.1
The compliance statement for entities which implement the DLINKSW-L2FDB-MIB.
         dL2FdbGroups 1.3.6.1.4.1.171.14.3.2.2
             dL2FdbGlobalGroup 1.3.6.1.4.1.171.14.3.2.2.1
A collection of objects providing the gloal configuration for L2FDB
             dL2FdbMacAddrTableGroup 1.3.6.1.4.1.171.14.3.2.2.2
A collection of objects providing the information of MAC-Address-Table for L2FDB
             dL2FdbInterfaceGroup 1.3.6.1.4.1.171.14.3.2.2.3
A collection of objects providing the information of Interface Table for L2FDB
             dL2FdbMacChangeNotifyCfgGroup 1.3.6.1.4.1.171.14.3.2.2.4
A collection of objects about the information for L2FDB notification.
             dL2FdbMcastFilterModeCfgGroup 1.3.6.1.4.1.171.14.3.2.2.5
A collection of objects about the configuration for multicast filter mode.
             dL2FdbMacChangeNotifyGroup 1.3.6.1.4.1.171.14.3.2.2.6
The notifications information used for the change of MAC address table.
             dL2FdbMacChgNotificationGroup 1.3.6.1.4.1.171.14.3.2.2.7
The collection of notifications used for monitoring the change of MAC address table.