DLINKSW-CPU-PROTECT-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DLINKSW-CPU-PROTECT-MIB
Download as:   
DLINK-ID-REC-MIB, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dlinkSwCpuProtectMIB 1.3.6.1.4.1.171.14.19
The MIB module for managing CPU protection.
       dCpuProtectMIBNotifications 1.3.6.1.4.1.171.14.19.0
       dCpuProtectMIBObjects 1.3.6.1.4.1.171.14.19.1
           dCpuProtectMIBObjectsCtrl 1.3.6.1.4.1.171.14.19.1.2
               dCpuProtectProtoRateLimitTable 1.3.6.1.4.1.171.14.19.1.2.1 no-access
The object configure the rate-limit of traffic destined to CPU based on protocol type.
                   dCpuProtectProtoRateLimitEntry 1.3.6.1.4.1.171.14.19.1.2.1.1 no-access
The object configures rate-limit control based on a specific protocol type.
                       dCpuProtectProtoRLType 1.3.6.1.4.1.171.14.19.1.2.1.1.1 cpuprotectprotocoltype no-access
This object indicates the protocol type.
                       dCpuProtectProtoRLRate 1.3.6.1.4.1.171.14.19.1.2.1.1.2 maxrate read-only
This object indicates the rate-limit of the specific protocol type. The value of -1 has the special meaning of identifying that there is no rate-limit of the specific protocol type.
                       dCpuProtectProtoRLClearCounter 1.3.6.1.4.1.171.14.19.1.2.1.1.3 integer read-only
This object is used to reset the counter of the specific protocol type when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned. Enumeration: 'clear': 1, 'noOp': 2.
               dCpuProtectSubIntfRLTable 1.3.6.1.4.1.171.14.19.1.2.2 no-access
This table consists of the rate-limit information of the sub-interface.
                   dCpuProtectSubIntfRLEntry 1.3.6.1.4.1.171.14.19.1.2.2.1 no-access
The object configure rate-limit control based on a specific sub-interface.
                       dCpuProtectSubIntfRLType 1.3.6.1.4.1.171.14.19.1.2.2.1.1 integer no-access
This object indicates the type of sub-interface. Enumeration: 'route': 3, 'manage': 1, 'protocol': 2.
                       dCpuProtectSubIntfRLRate 1.3.6.1.4.1.171.14.19.1.2.2.1.2 maxrate read-only
This object indicates the rate-limit of the specific sub-interface. The value of -1 has the special meaning of identifying that there is no rate-limit of the specific sub-interface.
                       dCpuProtectSubIntfRLClearCounter 1.3.6.1.4.1.171.14.19.1.2.2.1.3 integer read-only
This object is used to reset the counter of the specific sub-interface when set to 'clear'. No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned. Enumeration: 'clear': 1, 'noOp': 2.
           dCpuProtectMIBObjectsCounters 1.3.6.1.4.1.171.14.19.1.3
               dCpuProtectProtoRLCntTable 1.3.6.1.4.1.171.14.19.1.3.1 no-access
This table consists of the traffic statistics by protocol type.
                   dCpuProtectProtoRLCntEntry 1.3.6.1.4.1.171.14.19.1.3.1.1 no-access
The per unit/slot traffic statistics about a protocol type. Objects in this table are read-only and appear automatically whenever the value of dCpuProtectProtoRLRate of a row in the dCpuProtectProtoRateLimitTable is not -1 (no-limit).
                       dCpuProtectProtoRLCntType 1.3.6.1.4.1.171.14.19.1.3.1.1.1 cpuprotectprotocoltype no-access
This object indicates the Protocol type.
                       dCpuProtectProtoRLCntUnitID 1.3.6.1.4.1.171.14.19.1.3.1.1.2 unitid no-access
This object indicates the unit/slot ID (for a chassis device) or unit number (for stacking device). For a standalone device, 0 is used for UnitID.
                       dCpuProtectProtoRLCntTotalCnt 1.3.6.1.4.1.171.14.19.1.3.1.1.3 counter64 read-only
This object indicates the counter which counts the packets received by CPU (per unit/slot) for the protocol type.
                       dCpuProtectProtoRLCntDropCnt 1.3.6.1.4.1.171.14.19.1.3.1.1.4 counter64 read-only
This object indicates the counter which counts the dropped packets due to exceeding the configured rate-limit.
               dCpuProtectSubIntfRLCounterTable 1.3.6.1.4.1.171.14.19.1.3.2 no-access
This table consists of the traffic statistics by sub-interface.
                   dCpuProtectSubIntfRLCounterEntry 1.3.6.1.4.1.171.14.19.1.3.2.1 no-access
The per unit traffic statistics about a sub-interface. Objects in this table are read-only and appear automatically whenever the value of dCpuProtectSubIntfRLRate of a row in the dCpuProtectSubIntfRLTable is not -1 (no-limit).
                       dCpuProtectSubIntfRLCntType 1.3.6.1.4.1.171.14.19.1.3.2.1.1 integer no-access
This object indicates the type of sub-interface. Enumeration: 'route': 3, 'manage': 1, 'protocol': 2.
                       dCpuProtectSubIntfRLCntUnitID 1.3.6.1.4.1.171.14.19.1.3.2.1.2 unitid no-access
This object indicates the slot (for a chassis device) or unit number (for stacking device). For a standalone device, 0 is used for UnitID.
                       dCpuProtectSubIntfRLCntTotalCnt 1.3.6.1.4.1.171.14.19.1.3.2.1.3 counter64 read-only
This object indicates the counter which counts the packets received by CPU (per unit/slot) for the subinterface.
                       dCpuProtectSubIntfRLCntDropCnt 1.3.6.1.4.1.171.14.19.1.3.2.1.4 counter64 read-only
This object indicates the counter which counts the dropped packets due to exceeding the configured rate-limit.
       dCpuProtectMIBConformance 1.3.6.1.4.1.171.14.19.2
           dCpuProtectMIBCompliances 1.3.6.1.4.1.171.14.19.2.1
               dCpuProtectMIBCompliance 1.3.6.1.4.1.171.14.19.2.1.1
The compliance statement for entities which implement the DLINKSW-CPU-PROTECT-MIB.
           dCpuProtectMIBGroups 1.3.6.1.4.1.171.14.19.2.2
               dCpuProtectProtoGroup 1.3.6.1.4.1.171.14.19.2.2.1
A collection of objects providing the configuration or statistics about the rate-limit of traffic destined to CPU by protocol type.
               dCpuProtectSubIntfGroup 1.3.6.1.4.1.171.14.19.2.2.2
A collection of objects providing the configuration or statistics about the rate-limit of traffic destined to CPU by sub-interface type.