DLINKSW-CABLE-DIAG-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DLINKSW-CABLE-DIAG-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dlinkSwCableDiagMIB 1.3.6.1.4.1.171.14.58
The MIB module for determining the status of the cables attached to the device.
       dCableDiagNotifications 1.3.6.1.4.1.171.14.58.0
       dCableDiagObjects 1.3.6.1.4.1.171.14.58.1
           dCableDiagIfTable 1.3.6.1.4.1.171.14.58.1.1 no-access
A table contains a list of information about test on the device's interfaces. Note that entries will exist in this table when the corresponding interface is capable to run test.
               dCableDiagIfEntry 1.3.6.1.4.1.171.14.58.1.1.1 no-access
An entry in the dCableDiagIfTable, contains the testing controls on an interface.
                   dCableDiagIfAction 1.3.6.1.4.1.171.14.58.1.1.1.1 integer read-write
This object control the action to be executed on the interface. noOp(1) - No action is taken if this object is set to 'noOp'. When read, the value 'noOp' is returned. test(2) - Start the test on the interface. clear(3) - Clear all the test results on the interface. The value of the following objects of the entry will become 'other'. -- dCableDiagResultPair1Status -- dCableDiagResultPair2Status -- dCableDiagResultPair3Status -- dCableDiagResultPair4Status The value of the following objects of the entry will become -1 (unavailable) -- dCableDiagResultPair1Length -- dCableDiagResultPair2Length -- dCableDiagResultPair3Length -- dCableDiagResultPair4Length The value of dCableDiagResultStatus of the entry will become 'notRun'. Enumeration: 'test': 2, 'clear': 3, 'noOp': 1.
           dCableDiagResultTable 1.3.6.1.4.1.171.14.58.1.2 no-access
A table contains a list of interface's cable situation. Note that entries will exist in this table when the corresponding interface is a copper Ethernet port.
               dCableDiagResultEntry 1.3.6.1.4.1.171.14.58.1.2.1 no-access
An entry in dCableDiagResultTable contains cable situation of an interface.
                   dCableDiagResultPair1Status 1.3.6.1.4.1.171.14.58.1.2.1.1 dlinkcablediagstatus read-only
This object indicates the status of pair 1 of the cable.
                   dCableDiagResultPair2Status 1.3.6.1.4.1.171.14.58.1.2.1.2 dlinkcablediagstatus read-only
This object indicates the status of pair 2 of the cable.
                   dCableDiagResultPair3Status 1.3.6.1.4.1.171.14.58.1.2.1.3 dlinkcablediagstatus read-only
This object indicates the status of pair 3 of the cable.
                   dCableDiagResultPair4Status 1.3.6.1.4.1.171.14.58.1.2.1.4 dlinkcablediagstatus read-only
This object indicates the status of pair 4 of the cable.
                   dCableDiagResultPair1Length 1.3.6.1.4.1.171.14.58.1.2.1.5 integer32 read-only
This object indicates the approximate length or length to the failure of pair 1 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
                   dCableDiagResultPair2Length 1.3.6.1.4.1.171.14.58.1.2.1.6 integer32 read-only
This object indicates the approximate length or length to the failure of pair 2 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
                   dCableDiagResultPair3Length 1.3.6.1.4.1.171.14.58.1.2.1.7 integer32 read-only
This object indicates the approximate length or length to the failure of pair 3 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
                   dCableDiagResultPair4Length 1.3.6.1.4.1.171.14.58.1.2.1.8 integer32 read-only
This object indicates the approximate length or length to the failure of pair 4 of the cable. This value is in meter units. The special value of -1 indicates the length is unavailable.
                   dCableDiagResultStatus 1.3.6.1.4.1.171.14.58.1.2.1.9 integer read-only
Indicates the status of cable diagnostics on the interface. notRun(0) - the cable diagnostics has never been run for this interface or the previous result is cleared. processing(1) - the cable diagnostics is currently running on the interface. lastTestOk(2) - the last cable diagnostics was performed successfully on the interface. lastTestFailed(3) - the last cable diagnostics failed on the interface. Enumeration: 'lastTestOk': 2, 'processing': 1, 'notRun': 0, 'lastTestFailed': 3.
       dCableDiagConformance 1.3.6.1.4.1.171.14.58.2
           dCableDiagCompliances 1.3.6.1.4.1.171.14.58.2.1
               dCableDiagCompliance 1.3.6.1.4.1.171.14.58.2.1.1
The compliance statement for entities which implement the DLINKSW-CABLE-DIAG-MIB.
               dCableDiagGroups 1.3.6.1.4.1.171.14.58.2.1.2
                   dCableDiagBasicGroup 1.3.6.1.4.1.171.14.58.2.1.2.1
This group contains the collection of objects related to configuration and information of fundamental cable diagnostics feature.