DLINKPRIME-QOS-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DLINKPRIME-QOS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, DLINK-ID-REC-MIB, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dlinkPrimeQosMIB 1.3.6.1.4.1.171.15.13
       dpQosMIBObjects 1.3.6.1.4.1.171.15.13.1
           dpQosScheduling 1.3.6.1.4.1.171.15.13.1.1
               dpQosSchedulingModeTable 1.3.6.1.4.1.171.15.13.1.1.1
This table consists of a list of scheduling mechanism configurations for ports.
                   dpQosSchedulingModeEntry 1.3.6.1.4.1.171.15.13.1.1.1.1
An entry configures the scheduling mode on an interface.
                       dpQosSchedulingMode 1.3.6.1.4.1.171.15.13.1.1.1.1.1
This object indicates the mechanism of QoS scheduling on the interface.
           dpQosBandwidthCtrl 1.3.6.1.4.1.171.15.13.1.2
               dpQosBandwidthCtrlTable 1.3.6.1.4.1.171.15.13.1.2.1
A table consists of a list of configurations for bandwidth control on interfaces.
                   dpQosBandwidthCtrlEntry 1.3.6.1.4.1.171.15.13.1.2.1.1
An entry configures the bandwidth on an interface. An entry will exist for every applicable port.
                       dpQosBandwidthRxRate 1.3.6.1.4.1.171.15.13.1.2.1.1.1
This object indicates Rx Rate of the specified port. The special value of 0 indicates there is no bandwidth limit for ingress packets.
                       dpQosBandwidthTxRate 1.3.6.1.4.1.171.15.13.1.2.1.1.2
This object indicates Tx Rate of the specified port. The special value of 0 indicates there is no bandwidth limit for egress packets. It is based on the dpQosBandwidthTxRateMode field and
           dpQosCosCfg 1.3.6.1.4.1.171.15.13.1.3
               dpQosCosCfgTable 1.3.6.1.4.1.171.15.13.1.3.1
This table consists of a list of CoS configurations for ports.
                   dpQosCosCfgEntry 1.3.6.1.4.1.171.15.13.1.3.1.1
An entry configures the CoS on an interface.
                       dpQosCfgSetCos 1.3.6.1.4.1.171.15.13.1.3.1.1.1
This object indicates the CoS on the interface.
       dpQosMIBConformance 1.3.6.1.4.1.171.15.13.2
           dpQosCompliances 1.3.6.1.4.1.171.15.13.2.1
           dpQosGroups 1.3.6.1.4.1.171.15.13.2.2