DL5400-MIB: View SNMP OID List / Download MIB

VENDOR: DIGITAL LINK


 Home MIB: DL5400-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 digital_link 1.3.6.1.4.1.300
         dl5400 1.3.6.1.4.1.300.110
                 configuration 1.3.6.1.4.1.300.110.1
                     unitLevelConfig 1.3.6.1.4.1.300.110.1.1
                         unitSerialNum 1.3.6.1.4.1.300.110.1.1.1 displaystring read-only
An ID that uniquely and globally identifies the unit. A Serial Number must consist of printable ASCII characters 0x20..0x7E.
                         unitName 1.3.6.1.4.1.300.110.1.1.2 displaystring read-write
A descriptive name that identifies the DL5400 unit. Use of this parameter is optional, but recommended to aid management.
                         unitHwRev 1.3.6.1.4.1.300.110.1.1.3 displaystring read-only
The DL5400 hardware revision.
                         unitSwRev 1.3.6.1.4.1.300.110.1.1.4 displaystring read-only
The DL5400 software revision.
                         unitMibRev 1.3.6.1.4.1.300.110.1.1.5 displaystring read-only
The DL5400 MIB revision.
                         unitFrontPnl 1.3.6.1.4.1.300.110.1.1.6 integer read-write
This feature enables (ON) or disables (OFF) the users ability to make changes in the configuration or run tests from the front panel display and buttons. Enumeration: 'disabled': 1, 'enabled': 2.
                         unitDateYear 1.3.6.1.4.1.300.110.1.1.7 todyear read-write
The DL5400's date: Year.
                         unitDateMonth 1.3.6.1.4.1.300.110.1.1.8 todmonth read-write
The DL5400's date: Month.
                         unitDateDay 1.3.6.1.4.1.300.110.1.1.9 todday read-write
The DL5400's date: Day.
                         unitTimeHour 1.3.6.1.4.1.300.110.1.1.10 todhour read-write
The DL5400's time: Hour.
                         unitTimeMinute 1.3.6.1.4.1.300.110.1.1.11 todminute read-write
The DL5400's time: Minute.
                         unitTimeSecond 1.3.6.1.4.1.300.110.1.1.12 todsecond read-write
The DL5400's time: Second.
                         unitTimezone 1.3.6.1.4.1.300.110.1.1.13 integer read-write
This object is used to indicate the timezone associated with the time of day that exists on DL5400 System. The enumerated values are defined as hours west of Greenwhich, for example, g01Timezone represents the time zone which is 1 hour west of Greenwhich. Enumeration: 'g13Timezone': 14, 'hstTimezone': 11, 'g22Timezone': 23, 'g18Timezone': 19, 'g01Timezone': 2, 'g14Timezone': 15, 'g20Timezone': 21, 'astTimezone': 10, 'g17Timezone': 18, 'g11Timezone': 12, 'g23Timezone': 24, 'cstTimezone': 7, 'g21Timezone': 22, 'mstTimezone': 8, 'g03Timezone': 4, 'g12Timezone': 13, 'pstTimezone': 9, 'estTimezone': 6, 'g15Timezone': 16, 'g04Timezone': 5, 'g19Timezone': 20, 'g02Timezone': 3, 'gmtTimezone': 1, 'g16Timezone': 17.
                         unitLedStatus 1.3.6.1.4.1.300.110.1.1.14 integer read-only
The defined values have the following description Off - The unit is not equipped or is provision in an out of Service state Green - No alarms, status or test conditions exists for the unit Blink Amber - Test conditions are present in the unit Solid Amber - A minor alarm condition persists in the unit or on some interface of the unit, or the unit is powering up. Red - An Alarm condition persists in the unit or on some interface of the unit Blink-Green - reserved Blink-Red - reserved Enumeration: 'solid-Amber': 5, 'blink-Red': 7, 'off': 1, 'blink-Green': 3, 'green': 2, 'red': 6, 'blink-Amber': 4.
                         unitTimeStamp 1.3.6.1.4.1.300.110.1.1.15 displaystring read-only
Time Stamp on the unit of format MM/DD/YYYY HH:MM:SS This will be sent as a varbind along with all the traps to NMS manager
                         unitModelType 1.3.6.1.4.1.300.110.1.1.16 integer read-only
The unit model type Enumeration: 'ml-pppNxDs1Enet': 1.
                         unitRouteMode 1.3.6.1.4.1.300.110.1.1.17 integer read-write
Unit Route Mode Enumeration: 'fastForward': 2, 'staticIp': 1.
                     unitTelnetConfig 1.3.6.1.4.1.300.110.1.2
                         unitTelnetIdleTimeout 1.3.6.1.4.1.300.110.1.2.1 integer read-write
This object is used to indicate number of minutes of inactivity required before setting the telnet access point to auto-logoff.
                     unitDteEnetCfg 1.3.6.1.4.1.300.110.1.3
                         dteEnetTable 1.3.6.1.4.1.300.110.1.3.1 no-access
Table of all Dte Ethernet ports in the system
                             dteEnetEntry 1.3.6.1.4.1.300.110.1.3.1.1 no-access
An entry in the dteEnetTable
                                 dteEnetIndex 1.3.6.1.4.1.300.110.1.3.1.1.1 integer read-only
The dteEnet port index Enumeration: 'dte1': 1.
                                 dteEnetIpAddress 1.3.6.1.4.1.300.110.1.3.1.1.2 ipaddress read-write
IP address assigned to the DTE port of the DL5400.
                                 dteEnetSubnetMask 1.3.6.1.4.1.300.110.1.3.1.1.3 ipaddress read-write
IP Subnet mask assigned to the DTE port of the DL5400.
                                 dteEnetMacAddress 1.3.6.1.4.1.300.110.1.3.1.1.4 octet string read-only
Ethernet MAC address of this dte port
                                 dteEnetProtocol 1.3.6.1.4.1.300.110.1.3.1.1.5 integer read-write
Ethernet protocol used by the DL5400. dix is also called Ethernet-II. Enumeration: 'ethernet': 1, 'ieee8023': 2.
                                 dteEnetOper 1.3.6.1.4.1.300.110.1.3.1.1.6 integer read-write
Ethernet operation used by the DL5400. Enumeration: 'hundredMb': 3, 'tenMb': 2, 'autodetect': 1.
                                 dteEnetMode 1.3.6.1.4.1.300.110.1.3.1.1.7 integer read-write
Ethernet mode used by the DL5400. Enumeration: 'autodetect': 1, 'fullduplex': 3, 'halfduplex': 2.
                                 dteEnetOperStatus 1.3.6.1.4.1.300.110.1.3.1.1.8 displaystring read-only
Ethernet operation status
                                 dteEnetModeStatus 1.3.6.1.4.1.300.110.1.3.1.1.9 displaystring read-only
Ethernet Mode status
                     comm1SerialConfig 1.3.6.1.4.1.300.110.1.5
                         comm1SerialPortState 1.3.6.1.4.1.300.110.1.5.1 integer read-write
This object is used to enable or disable port. Enumeration: 'disabled': 1, 'enabled': 2.
                         comm1SerialBaudRate 1.3.6.1.4.1.300.110.1.5.2 dl5400commbaudrate read-write
COMM 1 Baud Rate.
                         comm1SerialBitsPerWord 1.3.6.1.4.1.300.110.1.5.3 dl5400commnumdatabits read-write
COMM 1 Bits Per Word.
                         comm1SerialStopBits 1.3.6.1.4.1.300.110.1.5.4 dl5400commstopbits read-write
COMM 1 Stop Bits.
                         comm1SerialParity 1.3.6.1.4.1.300.110.1.5.5 dl5400commparity read-write
COMM 1 Parity.
                         comm1SerialFlowControl 1.3.6.1.4.1.300.110.1.5.6 dl5400commflowcontrol read-write
COMM 1 Flow Control.
                         comm1SerialLogoutOnLos 1.3.6.1.4.1.300.110.1.5.7 integer read-write
This object is used to enable or disable auto-logoff on loss of DSR. Enumeration: 'disabled': 1, 'enabled': 2.
                         comm1SerialIdleTimeout 1.3.6.1.4.1.300.110.1.5.8 integer read-write
This object is used to indicate number of minutes of inactivity required before setting this serial access point to auto-logoff.
                     comm2SerialConfig 1.3.6.1.4.1.300.110.1.6
                         comm2SerialPortState 1.3.6.1.4.1.300.110.1.6.1 integer read-write
This object is used to enable or disable port. Enumeration: 'disabled': 1, 'enabled': 2.
                         comm2SerialBaudRate 1.3.6.1.4.1.300.110.1.6.2 dl5400commbaudrate read-write
COMM 2 Baud Rate.
                         comm2SerialBitsPerWord 1.3.6.1.4.1.300.110.1.6.3 dl5400commnumdatabits read-write
COMM 2 Bits Per Word.
                         comm2SerialStopBits 1.3.6.1.4.1.300.110.1.6.4 dl5400commstopbits read-write
COMM 2 Stop Bits.
                         comm2SerialParity 1.3.6.1.4.1.300.110.1.6.5 dl5400commparity read-write
COMM 2 Parity.
                         comm2SerialFlowControl 1.3.6.1.4.1.300.110.1.6.6 dl5400commflowcontrol read-write
COMM 2 Flow Control. HwFlowControl option is not applicable for multidrop serial port when in MultiDrop mode
                         comm2SerialLogoutOnLos 1.3.6.1.4.1.300.110.1.6.7 integer read-write
This object is used to enable or disable auto-logoff on loss of DSR. Enumeration: 'disabled': 1, 'enabled': 2.
                         comm2SerialIdleTimeout 1.3.6.1.4.1.300.110.1.6.8 integer read-write
This object is used to indicate number of minutes of inactivity required before setting this serial access point to auto-logoff.
                         comm2InMDmode 1.3.6.1.4.1.300.110.1.6.9 integer read-write
This object indicates if this serial port is in multidrop mode or not. Enumeration: 'disabled': 1, 'enabled': 2.
                         comm2InMDId 1.3.6.1.4.1.300.110.1.6.10 displaystring read-write
Identifies the multidrop session
                     netConfig 1.3.6.1.4.1.300.110.1.7
                         netPriTxClk 1.3.6.1.4.1.300.110.1.7.1 dl5400txclksrc read-write
The primary transmit clock source for DL5400.
                         netPriLoopPort 1.3.6.1.4.1.300.110.1.7.2 integer read-write
The primary loop port clock source for DL5400.
                         netSecTxClk 1.3.6.1.4.1.300.110.1.7.3 dl5400txclksrc read-write
The secondary transmit clock source for DL5400.
                         netSecLoopPort 1.3.6.1.4.1.300.110.1.7.4 integer read-write
The secondary loop port clock source for DL5400.
                         netExtClkFrequency 1.3.6.1.4.1.300.110.1.7.5 integer read-write
The defined parameters are the external clock frequencies. The user must provision what frequency is to be used Enumeration: 'freq1544kHZ': 2, 'freq8kHZ': 1.
                         netPriStatus 1.3.6.1.4.1.300.110.1.7.6 displaystring read-only
Primary clock operation status
                         netSecStatus 1.3.6.1.4.1.300.110.1.7.7 displaystring read-only
Secondary clock operation status
                         netActiveStatus 1.3.6.1.4.1.300.110.1.7.8 displaystring read-only
Active clock operation status
                         netSuppressYeldet 1.3.6.1.4.1.300.110.1.7.9 integer read-write
This enables or disables the suppression of Yellow Alarm (RAI) detection. Applicable in SF Framing Enumeration: 'allowYelDet': 2, 'suppressYelDet': 1.
                         netLineType 1.3.6.1.4.1.300.110.1.7.10 integer read-only
Tells if this is a T1 or E1 device Enumeration: 'e1': 2, 't1': 1.
                         netPortTable 1.3.6.1.4.1.300.110.1.7.11 no-access
Table of all network port in the system.
                               netPortEntry 1.3.6.1.4.1.300.110.1.7.11.1 no-access
An entry in the Net Port Table
                                   netPortIndex 1.3.6.1.4.1.300.110.1.7.11.1.1 integer read-only
The network port index.
                                   netAdmin 1.3.6.1.4.1.300.110.1.7.11.1.2 integer read-write
Tells the Net DS1 Admin state Enumeration: 'is': 1, 'oos-mt': 3, 'oos': 2.
                                   netFramingFormat 1.3.6.1.4.1.300.110.1.7.11.1.3 integer read-write
This variable describes the Framing Format option for the network port. Enumeration: 'esf': 2, 'd4': 3.
                                   netLineCode 1.3.6.1.4.1.300.110.1.7.11.1.4 integer read-write
This variable describes the Line Code option for the network port. Enumeration: 'ami': 5, 'b8zs': 2.
                                   netLBO 1.3.6.1.4.1.300.110.1.7.11.1.5 integer read-write
This selects the line build out value in dBs and applies to CSU/DSU mode only. Enumeration: 'ft266To399': 5, 'ft399To533': 6, 'ft0To133': 3, 'lbo-7p5dB': 9, 'lbo-15dB': 10, 'ft533To655': 7, 'lbo-22p5dB': 11, 'ft133To266': 4, 'lbo-0dB': 8.
                                   netEGL 1.3.6.1.4.1.300.110.1.7.11.1.6 integer read-write
This selects the equalizer gain limit in dBs and applies to CSU mode only. Enumeration: 'egl-36dB': 1, 'egl-30dB': 2.
                                   netFDL 1.3.6.1.4.1.300.110.1.7.11.1.7 integer read-write
'other' indicates that a protocol other than one following is used. 'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI. 'dsx1Att-54016' refers to ESF FDL exchanges. 'dsx1Fdl-none' indicates that the device does not use the FDL. Enumeration: 'ansi': 2, 'none': 1, 'att': 3, 'both': 4.
                                   netSetCode 1.3.6.1.4.1.300.110.1.7.11.1.8 integer read-write
enabled or disabled setCode feature. Enumeration: 'yes': 2, 'no': 1.
                                   netClock 1.3.6.1.4.1.300.110.1.7.11.1.9 integer read-write
This selects the source of Transmit clock. Enumeration: 'sysTiming': 3, 'loopTiming': 1.
                                   netFrameStatus 1.3.6.1.4.1.300.110.1.7.11.1.10 displaystring read-only
Framing Operational State.
                                   netFrameUpTime 1.3.6.1.4.1.300.110.1.7.11.1.11 timeticks read-only
Tells the Framing UpTime.
                     unitSnmpConfig 1.3.6.1.4.1.300.110.1.8
                         unitSnmpTrapAddrTable 1.3.6.1.4.1.300.110.1.8.1 no-access
A list of IP addresses of the management stations along with information on how to direct a trap to that addresss
                             unitSnmpTrapAddrEntry 1.3.6.1.4.1.300.110.1.8.1.1 no-access
An entry in the Snmp trap address table
                                 unitSnmpTrapHostAddr 1.3.6.1.4.1.300.110.1.8.1.1.1 ipaddress read-only
Specifies the IP address of the management station to which this unit sends traps.
                                 unitSnmpTrapDirection 1.3.6.1.4.1.300.110.1.8.1.1.2 integer read-only
Specifies the way the trap is to be sent to the host Enumeration: 'disabled': 1, 'outBand': 3, 'inBand': 2.
                         unitSnmpTrapDevState 1.3.6.1.4.1.300.110.1.8.2 integer read-write
Specifies whether to forward or block SNMP traps on device. Enumeration: 'forward': 1, 'block': 2.
                         unitSnmpTrapCommunity 1.3.6.1.4.1.300.110.1.8.3 displaystring read-write
Specifies the Community Name of the management station to which this unit sends traps.
                     unitPPPConfig 1.3.6.1.4.1.300.110.1.9
                         pppPortTable 1.3.6.1.4.1.300.110.1.9.1 no-access
Table of all network ports in the system.
                             pppPortEntry 1.3.6.1.4.1.300.110.1.9.1.1 no-access
An entry in the PPP Port table
                                 pppPortIndex 1.3.6.1.4.1.300.110.1.9.1.1.1 integer read-only
Port number of the Net port. Enumeration: 'net8': 8, 'net7': 7, 'net6': 6, 'net5': 5, 'net4': 4, 'net3': 3, 'net2': 2, 'net1': 1.
                                 pppPortInitialMRU 1.3.6.1.4.1.300.110.1.9.1.1.2 integer read-write
The initial Maximum Receive Unit (MRU) that the local PPP entity will advertise to the remote entity. If the value of this variable is 0 then the local PPP entity will not advertise any MRU to the remote entity and the default MRU will be assumed. Changing this object will have effect when the link is next restarted.
                                 pppPortMagicNumber 1.3.6.1.4.1.300.110.1.9.1.1.3 integer read-write
If true(2) then the local node will attempt to perform Magic Number negotiation with the remote node. If false(1) then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote node, per the PPP specification. Changing this object will have effect when the link is next restarted. Enumeration: 'true': 2, 'false': 1.
                                 pppPortFcsSize 1.3.6.1.4.1.300.110.1.9.1.1.4 integer read-write
The size of the FCS, in bits, the local node will attempt to negotiate for use with the remote node. Regardless of the value of this object, the local node will comply with any FCS size negotiations initiated by the remote node, per the PPP specification. Changing this object will have effect when the link is next restarted. Enumeration: 'size16bits': 1, 'size32bits': 2.
                                 pppPortRestore 1.3.6.1.4.1.300.110.1.9.1.1.5 integer read-write
PPP port restore mode, auto or manual. Enumeration: 'auto': 1, 'manual': 2.
                         unitMLPPPConfig 1.3.6.1.4.1.300.110.1.9.2
                             mlPPPIpAddress 1.3.6.1.4.1.300.110.1.9.2.1 ipaddress read-write
IP Address assigned to the ML-PPP port of DL5400.
                             mlPPPSubnetMask 1.3.6.1.4.1.300.110.1.9.2.2 ipaddress read-write
IP Subnet mask assigned to the ML-PPP link of DL5400.
                             mlPPPNumberedInterface 1.3.6.1.4.1.300.110.1.9.2.3 integer read-write
Numbered Interface enabled or disabled. Enumeration: 'disabled': 1, 'enabled': 2.
                             mlPPPMRRU 1.3.6.1.4.1.300.110.1.9.2.4 integer read-write
Maximum Received Reconstructed Unit of ML-PPP.
                             mlPPPBundleStatus 1.3.6.1.4.1.300.110.1.9.2.5 displaystring read-only
Tells the current bundle status
                             mlPPPBundleUpTime 1.3.6.1.4.1.300.110.1.9.2.6 timeticks read-only
The time (in hundredths of a second) since the bundle is up.
                             mlPPPIPCPState 1.3.6.1.4.1.300.110.1.9.2.7 displaystring read-only
The current state of IPCP.
                         mlPPPPortTable 1.3.6.1.4.1.300.110.1.9.3 no-access
Table of all mlppp port in the system.
                             mlPPPPortEntry 1.3.6.1.4.1.300.110.1.9.3.1 no-access
An entry in the mlppp Port Table
                                 mlPPPPortIndex 1.3.6.1.4.1.300.110.1.9.3.1.1 integer read-only
The network port index.
                                 mlPPPAdmin 1.3.6.1.4.1.300.110.1.9.3.1.2 integer read-write
Tells the MLPPP Admin State. Enumeration: 'is': 1, 'oos-mt': 3, 'oos': 2.
                                 mlPPPStatus 1.3.6.1.4.1.300.110.1.9.3.1.3 displaystring read-only
Tells the MLPPP Operational State.
                                 mlPPPUpTime 1.3.6.1.4.1.300.110.1.9.3.1.4 timeticks read-only
The time (in hundredths of a second) since the MLPPP is up.
                                 mlPPPLCPState 1.3.6.1.4.1.300.110.1.9.3.1.5 displaystring read-only
Tells the LCP Operational State.
                     unitRouterConfig 1.3.6.1.4.1.300.110.1.10
                           unitStaticRoutingTable 1.3.6.1.4.1.300.110.1.10.1 no-access
Table of all static routing entries in the system.
                               staticRoutingEntry 1.3.6.1.4.1.300.110.1.10.1.1 no-access
An entry in the static routing table.
                                   routeDestination 1.3.6.1.4.1.300.110.1.10.1.1.1 ipaddress read-write
Destination of the static route.
                                   routeNetworkMask 1.3.6.1.4.1.300.110.1.10.1.1.2 ipaddress read-write
Network Mask
                                   routeNextHopAddress 1.3.6.1.4.1.300.110.1.10.1.1.3 ipaddress read-write
Address of the next hop router. The next hop router must be on the same local network as DL5400
                                   routeMetric 1.3.6.1.4.1.300.110.1.10.1.1.4 integer read-write
Number of hops between DL5400 and the destination.
                                   routeDirection 1.3.6.1.4.1.300.110.1.10.1.1.5 integer read-write
Direction of the Route, Network(NUM) or WAN. Enumeration: 'wan': 1, 'num': 2.
                                   routeStatus 1.3.6.1.4.1.300.110.1.10.1.1.6 dl5400validation read-write
Writing invalid has the effect of deleting this interface.
                     unitArpConfig 1.3.6.1.4.1.300.110.1.11
                           unitClearArpTable 1.3.6.1.4.1.300.110.1.11.1 integer read-write
Clear all arp entries in the system. Enumeration: 'true': 1.
                           unitArpTable 1.3.6.1.4.1.300.110.1.11.2 no-access
Table of all arp entries in the system.
                               unitArpEntry 1.3.6.1.4.1.300.110.1.11.2.1 no-access
An entry in the arp table.
                                   arpEntryNum 1.3.6.1.4.1.300.110.1.11.2.1.1 integer read-only
Entry Number in the arp table.
                                   arpIPAddress 1.3.6.1.4.1.300.110.1.11.2.1.2 ipaddress read-only
Entry IpAddress in the arp table.
                                   arpMACAddress 1.3.6.1.4.1.300.110.1.11.2.1.3 octet string read-only
Entry MAC address in the arp table.
                                   arpPortNum 1.3.6.1.4.1.300.110.1.11.2.1.4 integer read-only
Entry Port Number in the arp table.
                 alarms 1.3.6.1.4.1.300.110.2
                     unitAlarmConfig 1.3.6.1.4.1.300.110.2.1
                         unitAlarmStatusTable 1.3.6.1.4.1.300.110.2.1.1 no-access
The Unit Level alarms and status table.
                             unitAlarmStatusEntry 1.3.6.1.4.1.300.110.2.1.1.1 no-access
An Entry in the unit Alarms Table.
                                 unitAlarmIndex 1.3.6.1.4.1.300.110.2.1.1.1.1 integer read-only
An index value that uniquely identifies a Unit Level alarm entry.
                                 unitAlarmSeverity 1.3.6.1.4.1.300.110.2.1.1.1.2 integer read-only
This parameter indicates the severity of the alarm, or may indicate that the data is status only. Enumeration: 'status': 1, 'major': 3, 'minor': 2.
                                 unitAlarmType 1.3.6.1.4.1.300.110.2.1.1.1.3 dl5400event read-only
This parameter is the code for the alarm or status type. This code is used to index into an array of text strings to present a message to the human operator.
                                 unitAlarmOriginCardNum 1.3.6.1.4.1.300.110.2.1.1.1.4 dl5400cardid read-only
The card type of the device originating the event.
                                 unitAlarmOriginPortNum 1.3.6.1.4.1.300.110.2.1.1.1.5 dl5400portid read-only
The port number of the device originating the event.
                 events 1.3.6.1.4.1.300.110.3
                     unitEventTable 1.3.6.1.4.1.300.110.3.1 no-access
The Unit Level event history table.
                         unitEventEntry 1.3.6.1.4.1.300.110.3.1.1 no-access
An entry in the Unit Level event history table.
                             unitEventIndex 1.3.6.1.4.1.300.110.3.1.1.1 integer read-only
An index that uniquely identifies a Unit Level event entry.
                             unitEventSeverity 1.3.6.1.4.1.300.110.3.1.1.2 integer read-only
This parameter indicates whether an entry is status-only or the severity of an alarm entry. Enumeration: 'status': 1, 'information': 5, 'major': 3, 'clear': 4, 'minor': 2.
                             unitEventHour 1.3.6.1.4.1.300.110.3.1.1.3 todhour read-only
The hour that the event occurred.
                             unitEventMinute 1.3.6.1.4.1.300.110.3.1.1.4 todminute read-only
The minute that the event occurred.
                             unitEventSecond 1.3.6.1.4.1.300.110.3.1.1.5 todsecond read-only
The second that the event occurred.
                             unitEventMonth 1.3.6.1.4.1.300.110.3.1.1.6 todmonth read-only
The month that the event occurred.
                             unitEventDay 1.3.6.1.4.1.300.110.3.1.1.7 todday read-only
The day that the event occurred.
                             unitEventYear 1.3.6.1.4.1.300.110.3.1.1.8 todyear read-only
The year that the event occurred.
                             unitEventOriginCardNum 1.3.6.1.4.1.300.110.3.1.1.9 dl5400cardid read-only
The card type of the device originating the event.
                             unitEventOriginPortNum 1.3.6.1.4.1.300.110.3.1.1.10 dl5400portid read-only
The port number of the device originating the event.
                             unitEventType 1.3.6.1.4.1.300.110.3.1.1.11 dl5400event read-only
This parameter is the code for the event type. This code is used to index into an array of text strings to present a message to the human operator.
                 statistics 1.3.6.1.4.1.300.110.4
                     arpStats 1.3.6.1.4.1.300.110.4.1
                         arpbadLengthField 1.3.6.1.4.1.300.110.4.1.1 counter read-only
Bad Length Field
                         arpunsupportedHardware 1.3.6.1.4.1.300.110.4.1.2 counter read-only
unsupported Hardware
                         arpunsupportedProtocol 1.3.6.1.4.1.300.110.4.1.3 counter read-only
unsupported Protocol
                         arpinvalidSenderAddr 1.3.6.1.4.1.300.110.4.1.4 counter read-only
total number of packets with invalid sender protocol address
                         arpinvalidTargetAddr 1.3.6.1.4.1.300.110.4.1.5 counter read-only
total number of packets with invalid target protocol address
                         arpbadAddress 1.3.6.1.4.1.300.110.4.1.6 counter read-only
bad address
                         arppktsReceived 1.3.6.1.4.1.300.110.4.1.7 counter read-only
total number of packets recieved
                         arpshortPktsReceived 1.3.6.1.4.1.300.110.4.1.8 counter read-only
total number of short packets recieved
                         arppktsFromMeReceived 1.3.6.1.4.1.300.110.4.1.9 counter read-only
total number of packets from me received
                         arpsrcBcstReceived 1.3.6.1.4.1.300.110.4.1.10 counter read-only
total number of source broadcasts received
                         arprepliedSent 1.3.6.1.4.1.300.110.4.1.11 counter read-only
total number of replies sent
                         arpincomingRequests 1.3.6.1.4.1.300.110.4.1.12 counter read-only
total number of incoming requests
                         arprequestSent 1.3.6.1.4.1.300.110.4.1.13 counter read-only
total number of requests sent
                         arpnoMACAddr 1.3.6.1.4.1.300.110.4.1.14 counter read-only
No MAC address
                     hdlcStatsTable 1.3.6.1.4.1.300.110.4.2 no-access
The hdlc statistics table.
                         hdlcStatsEntry 1.3.6.1.4.1.300.110.4.2.1 no-access
An entry in the Hdlc statistics table.
                             hdlcPortIndex 1.3.6.1.4.1.300.110.4.2.1.1 integer read-only
Port Index
                             hdlcLinkStatusBadFCSc 1.3.6.1.4.1.300.110.4.2.1.2 counter read-only
Bad FCS
                             hdlcFramesAborted 1.3.6.1.4.1.300.110.4.2.1.3 counter read-only
Frame aborted
                             hdlcFramesNotAligned 1.3.6.1.4.1.300.110.4.2.1.4 counter read-only
Frame not aligned
                             hdlcOctetsRcv 1.3.6.1.4.1.300.110.4.2.1.5 counter read-only
Octets Received
                             hdlcPctsRcv 1.3.6.1.4.1.300.110.4.2.1.6 counter read-only
Packets Received
                             hdlcOctetsTrsmt 1.3.6.1.4.1.300.110.4.2.1.7 counter read-only
Octets Transmitted
                             hdlcPctsTrsmt 1.3.6.1.4.1.300.110.4.2.1.8 counter read-only
Packets Transmitted
                     miscStats 1.3.6.1.4.1.300.110.4.3
                         miscprotocolPctsDumped 1.3.6.1.4.1.300.110.4.3.1 counter read-only
Rx packets with IF error on data Ethernet interface
                         miscnonroutablePcts 1.3.6.1.4.1.300.110.4.3.2 counter read-only
Rx packets non routable on data Ehternet interface
                     clrStats 1.3.6.1.4.1.300.110.4.4
                         clearAllStats 1.3.6.1.4.1.300.110.4.4.1 integer read-write
clear all statistics Enumeration: 'true': 1.
                         clearCur15Min 1.3.6.1.4.1.300.110.4.4.2 integer read-write
clear current 15 minutes statistics Enumeration: 'true': 1.
                         clearCur24Hr 1.3.6.1.4.1.300.110.4.4.3 integer read-write
clear current 24 hours statistics Enumeration: 'true': 1.
                         clearOld15Min 1.3.6.1.4.1.300.110.4.4.4 integer read-write
clear old 15 minutes statistics Enumeration: 'true': 1.
                         clearOld24Hr 1.3.6.1.4.1.300.110.4.4.5 integer read-write
clear old 24 hours statistics Enumeration: 'true': 1.
                 maintenance 1.3.6.1.4.1.300.110.5
                     maintModTable 1.3.6.1.4.1.300.110.5.1 no-access
Table of all Module Status in the system
                         maintModEntry 1.3.6.1.4.1.300.110.5.1.1 no-access
An entry in the maintModTable
                             maintModIndex 1.3.6.1.4.1.300.110.5.1.1.1 integer read-only
The module index Enumeration: 'pp': 1, 'mpm': 4, 'enet': 3, 'ds1': 2.
                             maintModStatus 1.3.6.1.4.1.300.110.5.1.1.2 displaystring read-only
Module actual status
                             maintOperstatus 1.3.6.1.4.1.300.110.5.1.1.3 displaystring read-only
Module Operational status
                   dl5400ModulesAppear 1.3.6.1.4.1.300.1100.1
There is a module appeared in the device.
                   dl5400ModulesDisappear 1.3.6.1.4.1.300.1100.2
There is a module disappeared in the device.
                   dl5400SelfTestFail 1.3.6.1.4.1.300.1100.11
Self Test failed on the unit.
                   dl5400RamTestFail 1.3.6.1.4.1.300.1100.12
RAM Test failed on the unit.
                   dl5400RomChecksumFail 1.3.6.1.4.1.300.1100.13
ROM Checksum failed on the unit.
                   dl5400FlashChecksumFail 1.3.6.1.4.1.300.1100.14
Flash Checksum failed on the unit.
                   dl5400TimeNotSet 1.3.6.1.4.1.300.1100.15
The Unit's time is not set.
                   dl5400UnitRestart 1.3.6.1.4.1.300.1100.16
The Unit is resetting.
                   dl5400LampTestStart 1.3.6.1.4.1.300.1100.17
Lamp Test started.
                   dl5400LampTestEnd 1.3.6.1.4.1.300.1100.18
Lamp Test terminated.
                   dl5400mgmtPOSTFail 1.3.6.1.4.1.300.1100.19
Management POST failed.
                   dl5400mgmtPOSTok 1.3.6.1.4.1.300.1100.20
Management Port OK.
                   dl5400FrontTemperatureHigh 1.3.6.1.4.1.300.1100.21
The unit's front temperature is high.
                   dl5400FrontTemperatureOK 1.3.6.1.4.1.300.1100.22
The unit's front temperature is OK.
                   dl5400BackTemperatureHigh 1.3.6.1.4.1.300.1100.23
The unit's back temperature is high.
                   dl5400BackTemperatureOK 1.3.6.1.4.1.300.1100.24
The unit's back temperature is OK.
                   dl5400ExternalMajorAlarmStart 1.3.6.1.4.1.300.1100.25
The external major alarm input is active on the unit.
                   dl5400ExternalMajorAlarmEnd 1.3.6.1.4.1.300.1100.26
The external major alarm input is de-activated on the unit.
                   dl5400ExternalMinorAlarmStart 1.3.6.1.4.1.300.1100.27
The external minor alarm input is active on the unit.
                   dl5400ExternalMinorAlarmEnd 1.3.6.1.4.1.300.1100.28
The external minor alarm input is de-activated on the unit.
                   dl5400ExternalStatusAlarmStart 1.3.6.1.4.1.300.1100.29
The external status alarm input is active on the unit.
                   dl5400ExternalStatusAlarmEnd 1.3.6.1.4.1.300.1100.30
The external status alarm input is de-activated on the unit.
                   dl5400PrimaryClockFail 1.3.6.1.4.1.300.1100.31
Unit's primary clock has failed.
                   dl5400PrimaryClockOk 1.3.6.1.4.1.300.1100.32
Unit's primary clock is OK.
                   dl5400SecondaryClockFail 1.3.6.1.4.1.300.1100.33
Unit's Secondary clock has failed.
                   dl5400SecondaryClockOk 1.3.6.1.4.1.300.1100.34
Unit's Secondary clock is OK.
                   dl5400ExternalClockFail 1.3.6.1.4.1.300.1100.35
Unit's external clock has failed.
                   dl5400ExternalClockOk 1.3.6.1.4.1.300.1100.36
Unit's external clock is OK.
                   dl5400Fan1FailAlarm 1.3.6.1.4.1.300.1100.37
A fan 1 failed on the unit.
                   dl5400Fan1Ok 1.3.6.1.4.1.300.1100.38
A fan is ok on the unit.
                   dl5400Fan2FailAlarm 1.3.6.1.4.1.300.1100.39
A fan 2 failed on the unit.
                   dl5400Fan2Ok 1.3.6.1.4.1.300.1100.40
A fan 2 is ok on the unit.
                   dl5400PSFanFailed 1.3.6.1.4.1.300.1100.41
Power Supply Fan Failed on the unit.
                   dl5400PSFanOK 1.3.6.1.4.1.300.1100.42
Power Supply Fan OK on the unit.
                   dl5400PktProcessorPostFail 1.3.6.1.4.1.300.1100.43
Packet Processor POST Failed.
                   dl5400PktProcessorPostOk 1.3.6.1.4.1.300.1100.44
Packet Processor POST OK.
                   dl5400PacketProcessorMissing 1.3.6.1.4.1.300.1100.45
Packet Processor Missing.
                   dl5400PacketProcessorOk 1.3.6.1.4.1.300.1100.46
Packet Processor OK.
                   dl5400VoltageExceeds 1.3.6.1.4.1.300.1100.47
Voltage has exceeded allowed operating voltage range
                   dl5400VoltageOk 1.3.6.1.4.1.300.1100.48
Voltage is within allowed limits
                   dl5400ModuleProcessorFail 1.3.6.1.4.1.300.1100.49
Module Processor Failed
                   dl5400ModuleProcessorOk 1.3.6.1.4.1.300.1100.50
Module Processor OK.
                   dl5400ModulesCfgMismatch 1.3.6.1.4.1.300.1100.51
There is configuration mismatch between equipped modules.
                   dl5400ModulesCfgMatch 1.3.6.1.4.1.300.1100.52
There is no configuration mismatch between equipped modules.
                   dl5400UsePriClkAlarm 1.3.6.1.4.1.300.1100.53
Using primary clock source on the unit.
                   dl5400UseSecClkAlarm 1.3.6.1.4.1.300.1100.54
Using secondary clock source on the unit. Primary clock source failed on the unit.
                   dl5400UseIntClkAlarm 1.3.6.1.4.1.300.1100.55
Using internal clock source on the unit. Primary and secondary clock sources failed on the unit.
                   dl5400UseRxClk1Alarm 1.3.6.1.4.1.300.1100.56
Receive multiplexer synced to net 1.
                   dl5400UseRxClk2Alarm 1.3.6.1.4.1.300.1100.57
Receive multiplexer synced to net 2.
                   dl5400UseRxClk3Alarm 1.3.6.1.4.1.300.1100.58
Receive multiplexer synced to net 3.
                   dl5400UseRxClk4Alarm 1.3.6.1.4.1.300.1100.59
Receive multiplexer synced to net 4.
                   dl5400UseRxClk5Alarm 1.3.6.1.4.1.300.1100.60
Receive multiplexer synced to net 5.
                   dl5400UseRxClk6Alarm 1.3.6.1.4.1.300.1100.61
Receive multiplexer synced to net 6.
                   dl5400UseRxClk7Alarm 1.3.6.1.4.1.300.1100.62
Receive multiplexer synced to net 7.
                   dl5400UseRxClk8Alarm 1.3.6.1.4.1.300.1100.63
Receive multiplexer synced to net 8.
                   dl5400MLpppPOSTFail 1.3.6.1.4.1.300.1100.64
ML-PPP POST failed.
                   dl5400MLpppPOSTok 1.3.6.1.4.1.300.1100.65
ML-PPP Port OK.
                   dl5400MLpppModuleMissing 1.3.6.1.4.1.300.1100.66
ML-PPP Module is Missing
                   dl5400MLpppModuleOK 1.3.6.1.4.1.300.1100.67
ML-PPP Module is OK
                   dl5400MLpppInsufficientLinks 1.3.6.1.4.1.300.1100.68
ML-PPP Insufficient links reported.
                   dl5400MLpppInsufficientLinksOk 1.3.6.1.4.1.300.1100.69
Insufficient ML-PPP links alarm remitted.
                   dl5400ModulesFail 1.3.6.1.4.1.300.1100.70
There is a module failed in the device.
                   dl5400ModulesUp 1.3.6.1.4.1.300.1100.71
There is a module up in the device.
                   dl5400LossOfSignalStart 1.3.6.1.4.1.300.1100.100
Loss of Signal occured on the specified Network port.
                   dl5400LossOfSignalEnd 1.3.6.1.4.1.300.1100.101
Loss of Signal ended on the specified Network port.
                   dl5400LossOfFrameStart 1.3.6.1.4.1.300.1100.102
Loss of Frame ended on the specified Network port.
                   dl5400LossOfFrameEnd 1.3.6.1.4.1.300.1100.103
Loss of Frame ended on the specified Network port.
                   dl5400AisStart 1.3.6.1.4.1.300.1100.104
AIS Alarm started on the specified Network port.
                   dl5400AisEnd 1.3.6.1.4.1.300.1100.105
AIS Alarm started on the specified Network port.
                   dl5400RaiStart 1.3.6.1.4.1.300.1100.106
RAI Alarm(Yellow) received on the specified Network port.
                   dl5400RaiEnd 1.3.6.1.4.1.300.1100.107
RAI Alarm(Yellow) Ended on the specified Network port.
                   dl5400netLineRemoteLoopbackStart 1.3.6.1.4.1.300.1100.158
Network Line/Remote Loopback on specified Network port .
                   dl5400netLineRemoteLoopbackEnd 1.3.6.1.4.1.300.1100.159
Network Line/Remote Loopback ended on specified Network port .
                   dl5400pppEchoTimeout 1.3.6.1.4.1.300.1100.164
PPP Echo Timeout.
                   dl5400pppEchoTimeoutRemit 1.3.6.1.4.1.300.1100.165
PPP Echo Timeout Alarm Remitted.
                   dl5400pppLineLoopbackStart 1.3.6.1.4.1.300.1100.166
PPP Line Loopback Start.
                   dl5400pppLineLoopbackEnd 1.3.6.1.4.1.300.1100.167
PPP Line Loopback End.
                   dl5400pppLinkFallbackStart 1.3.6.1.4.1.300.1100.168
PPP Link FallbackStart.
                   dl5400pppLinkFallbackEnd 1.3.6.1.4.1.300.1100.169
PPP Link Fallback End.
                   dl5400dteLocalLoopbackStart 1.3.6.1.4.1.300.1100.170
Network DTE Local Loopback on specified Network port .
                   dl5400dteLocalLoopbackEnd 1.3.6.1.4.1.300.1100.171
Network DTE Local Loopback ended on specified Network port .
                   dl5400dteRemoteLoopbackStart 1.3.6.1.4.1.300.1100.172
Network DTE Remote Loopback on specified Network port .
                   dl5400dteRemoteLoopbackEnd 1.3.6.1.4.1.300.1100.173
Network DTE Remote Loopback ended on specified Network port .
                   dl5400MLpppLinkDown 1.3.6.1.4.1.300.1100.174
ML-PPP links down caused by ML-PPP Protocol Layer.
                   dl5400MLpppLinkUp 1.3.6.1.4.1.300.1100.175
ML-PPP links up caused by ML-PPP Protocol Layer.