DGS-3620-28SC-DC-L2MGMT-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DGS-3620-28SC-DC-L2MGMT-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swL2MgmtMIB 1.3.6.1.4.1.171.11.118.9.2
The Structure of Layer 2 Network Management Information.
     swL2DevMgmt 1.3.6.1.4.1.171.11.118.9.2.1
         swL2DevInfo 1.3.6.1.4.1.171.11.118.9.2.1.1
             swDevInfoTotalNumOfPort 1.3.6.1.4.1.171.11.118.9.2.1.1.1 integer read-only
The number of ports within this switch. This value is the sum of the ports within this switch.
             swDevInfoNumOfPortInUse 1.3.6.1.4.1.171.11.118.9.2.1.1.2 integer read-only
The number of ports in this switch connected to the segment or the end stations.
         swL2DevCtrl 1.3.6.1.4.1.171.11.118.9.2.1.2
             swL2DevCtrlSnmpTrapState 1.3.6.1.4.1.171.11.118.9.2.1.2.5 integer read-write
This object controls the SNMP trap status. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlCleanAllStatisticCounter 1.3.6.1.4.1.171.11.118.9.2.1.2.6 integer read-write
When the object is set to active, all statistical counters will be cleared. If set to normal, no action will occur. Enumeration: 'active': 2, 'normal': 1.
             swL2DevCtrlVlanIdOfFDBTbl 1.3.6.1.4.1.171.11.118.9.2.1.2.7 vlanid read-write
Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is the DEFAULT_VLAN_ID of the system.
             swL2MACNotifyState 1.3.6.1.4.1.171.11.118.9.2.1.2.8 integer read-write
This object can enable or disable MAC Notification. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2MACNotifyHistorySize 1.3.6.1.4.1.171.11.118.9.2.1.2.9 integer read-write
This object indicates the history size of MAC addresses in the MAC Address table. The default value is 1.
             swL2MACNotifyInterval 1.3.6.1.4.1.171.11.118.9.2.1.2.10 integer read-write
This object indicates the time interval, in seconds, that will trigger MAC notification messages.
             swL2DevCtrlAsymVlanState 1.3.6.1.4.1.171.11.118.9.2.1.2.13 integer read-write
This object enables or disables asymmetric VLANs during the runtime of the system. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlTelnet 1.3.6.1.4.1.171.11.118.9.2.1.2.14
                   swL2DevCtrlTelnetState 1.3.6.1.4.1.171.11.118.9.2.1.2.14.1 integer read-write
This object controls the Telnet status. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2DevCtrlTelnetTcpPort 1.3.6.1.4.1.171.11.118.9.2.1.2.14.2 integer read-write
This object designates TCP ports. When Telnet is disabled, this object is not accessible.
             swL2DevCtrlManagementVlanId 1.3.6.1.4.1.171.11.118.9.2.1.2.16 vlanid read-write
This object controls which previously created VLANs are included in the System IP Interface.
             swL2DevCtrlWeb 1.3.6.1.4.1.171.11.118.9.2.1.2.17
                   swL2DevCtrlWebState 1.3.6.1.4.1.171.11.118.9.2.1.2.17.1 integer read-write
This object controls the Web status. Enumeration: 'disabled': 2, 'enabled': 1.
                   swL2DevCtrlWebTcpPort 1.3.6.1.4.1.171.11.118.9.2.1.2.17.2 integer read-write
This object designates TCP ports. When Web is disabled, this object is not accessible.
             swL2DevCtrlLLDPState 1.3.6.1.4.1.171.11.118.9.2.1.2.18 integer read-write
Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For receiving LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlLLDPForwardMessageState 1.3.6.1.4.1.171.11.118.9.2.1.2.19 integer read-write
When lldp is disabled and lldp forward_message's are enabled, the LLDP Data Unit packets received by the switch will be forwarded. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlIpAutoconfig 1.3.6.1.4.1.171.11.118.9.2.1.2.20 integer read-write
This object controls the IP auto configuration state. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlCFM 1.3.6.1.4.1.171.11.118.9.2.1.2.21
                   swL2DevCtrlCFMState 1.3.6.1.4.1.171.11.118.9.2.1.2.21.1 integer read-write
This object indicates the CFM global state. Enumeration: 'disabled': 2, 'enabled': 1.
                   swL2DevCtrlCFMPortTable 1.3.6.1.4.1.171.11.118.9.2.1.2.21.2 no-access
A table containing the CFM state of specified ports.
                       swL2DevCtrlCFMPortEntry 1.3.6.1.4.1.171.11.118.9.2.1.2.21.2.1 no-access
The entry of the CFM state on specified ports.
                           swL2DevCtrlCFMPortIndex 1.3.6.1.4.1.171.11.118.9.2.1.2.21.2.1.1 integer no-access
This object indicates the port number.
                           swL2DevCtrlCFMPortState 1.3.6.1.4.1.171.11.118.9.2.1.2.21.2.1.2 integer read-write
This object indicates the CFM state by port. Enumeration: 'disabled': 2, 'enabled': 1.
                   swL2DevCtrlCFMMaTable 1.3.6.1.4.1.171.11.118.9.2.1.2.21.3 no-access
A table containing the CFM mode of specified MAs.
                       swL2DevCtrlCFMMaEntry 1.3.6.1.4.1.171.11.118.9.2.1.2.21.3.1 no-access
The entry of the CFM mode on specified MAs.
                           swL2DevCtrlCFMMaMode 1.3.6.1.4.1.171.11.118.9.2.1.2.21.3.1.1 integer read-write
This object indicates the CFM mode by MA. Enumeration: 'hardware': 2, 'software': 1.
                   swL2DevCtrlCFMMepTable 1.3.6.1.4.1.171.11.118.9.2.1.2.21.4 no-access
A table containing the CFM mode of specified MEPs.
                       swL2DevCtrlCFMMepEntry 1.3.6.1.4.1.171.11.118.9.2.1.2.21.4.1 no-access
The entry of the CFM mode on specified MEPs.
                           swL2DevCtrlCFMMepMode 1.3.6.1.4.1.171.11.118.9.2.1.2.21.4.1.1 integer read-only
This object indicates the CFM mode by MEP. Enumeration: 'hardware': 2, 'software': 1.
             swL2DevCtrlVLANTrunkState 1.3.6.1.4.1.171.11.118.9.2.1.2.22 integer read-write
This indicates the global state of the VLAN trunking feature of the device. Enumeration: 'disabled': 2, 'enabled': 1.
         swL2DevAlarm 1.3.6.1.4.1.171.11.118.9.2.1.3
             swL2DevAlarmNewRoot 1.3.6.1.4.1.171.11.118.9.2.1.3.1 integer read-write
When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevAlarmTopologyChange 1.3.6.1.4.1.171.11.118.9.2.1.3.2 integer read-write
This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled (3), the Topology Change trap is sent by the device when any of its configured ports transition from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device does not send the trap if this object value is disabled or in another state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.118.9.2.1.3.3 integer read-write
This object determines whether or not to send a trap message when the link changes. If the object is enabled (3), the Link Change trap is sent by the device when any of its port links change. The device does not send the trap if this object value is disabled or in another state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2VLANMgmt 1.3.6.1.4.1.171.11.118.9.2.2
         swL2VlanStaticTable 1.3.6.1.4.1.171.11.118.9.2.2.1 no-access
A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
             swL2VlanStaticEntry 1.3.6.1.4.1.171.11.118.9.2.2.1.1 no-access
Static information for a VLAN configured into this device by (local or network) management.
                 swL2VlanIndex 1.3.6.1.4.1.171.11.118.9.2.2.1.1.1 vlanid no-access
The VLAN-ID or other identifier referring to this VLAN.
                 swL2VLANAdvertisement 1.3.6.1.4.1.171.11.118.9.2.2.1.1.2 integer read-write
This object indicates if the advertisement is active or not. Enumeration: 'disabled': 2, 'enabled': 1.
         swL2PVIDAutoAssignmentState 1.3.6.1.4.1.171.11.118.9.2.2.2 integer read-write
This object controls the PVID auto assignment state. If 'Auto-assign PVID' is disabled, the PVID can only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change the PVID. If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. Using the VLAN list command, PVID is updated as the last item of the VLAN list. When a user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned 'default VLAN'. Enumeration: 'disabled': 2, 'enabled': 1.
         swL2VlanPortInfoTable 1.3.6.1.4.1.171.11.118.9.2.2.3 no-access
A table containing the VLAN and port role information of each port.
             swL2VlanPortInfoEntry 1.3.6.1.4.1.171.11.118.9.2.2.3.1 no-access
The table entry of VLAN port information.
                 swL2VlanPortInfoPortIndex 1.3.6.1.4.1.171.11.118.9.2.2.3.1.1 integer read-only
The port index.
                 swL2VlanPortInfoVid 1.3.6.1.4.1.171.11.118.9.2.2.3.1.2 vlanid read-only
The VLAN ID assigned to a special port
                 swL2VlanPortInfoPortRole 1.3.6.1.4.1.171.11.118.9.2.2.3.1.3 integer read-only
The port role of a special port. When the role is 'other', it means this port does not belong to the VLAN. Enumeration: 'untagged': 2, 'tagged': 3, 'other': 1, 'dynamic': 4, 'forbidden': 5.
         swL2NniGvrpBpduAddress 1.3.6.1.4.1.171.11.118.9.2.2.6 integer read-write
Specifies the GVRP's BPDU MAC address of the NNI port with Q-in-Q status. Enumeration: 'dot1d': 1, 'dot1ad': 2.
     swL2PortMgmt 1.3.6.1.4.1.171.11.118.9.2.3
         swL2PortInfoTable 1.3.6.1.4.1.171.11.118.9.2.3.1 no-access
A table that contains information about every port.
             swL2PortInfoEntry 1.3.6.1.4.1.171.11.118.9.2.3.1.1 no-access
A list of information for each port of the device.
                 swL2PortInfoPortIndex 1.3.6.1.4.1.171.11.118.9.2.3.1.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortInfoMediumType 1.3.6.1.4.1.171.11.118.9.2.3.1.1.2 integer read-only
Indicates the medium type of the port number. Enumeration: 'copper': 1, 'fiber': 2.
                 swL2PortInfoUnitID 1.3.6.1.4.1.171.11.118.9.2.3.1.1.3 integer read-only
Indicates the ID of the unit in the system.
                 swL2PortInfoType 1.3.6.1.4.1.171.11.118.9.2.3.1.1.4 integer read-only
This object indicates the connector type of this port. Enumeration: 'portType-100Base-X': 3, 'portType-10GBase-R': 6, 'portType-none': 0, 'portType-100Base-T': 2, 'portType-user-last': 10, 'portType-SIO': 8, 'portType-1000Base-T': 4, 'portType-1000Base-X': 5, 'portType-module-empty': 9, 'portType-10GBase-CX4': 7.
                 swL2PortInfoLinkStatus 1.3.6.1.4.1.171.11.118.9.2.3.1.1.5 integer read-only
This object indicates the port link status. Enumeration: 'link-fail': 3, 'other': 1, 'link-pass': 2.
                 swL2PortInfoNwayStatus 1.3.6.1.4.1.171.11.118.9.2.3.1.1.6 integer read-only
This object indicates the port speed and duplex mode. Enumeration: 'half-10Mbps-backp': 3, 'half-100Mbps-backp': 7, 'full-100Mbps-none': 6, 'half-10Gigabps-none': 16, 'err-disabled': 18, 'full-100Mbps-8023x': 5, 'half-1Gigabps-backp': 11, 'full-1Gigabps-none': 10, 'full-10Mbps-8023x': 1, 'full-10Gigabps-8023x': 13, 'half-100Mbps-none': 8, 'full-10Gigabps-none': 14, 'half-10Mbps-none': 4, 'half-1Gigabps-none': 12, 'full-10Mbps-none': 2, 'link-down': 0, 'half-10Gigabps-8023x': 15, 'full-1Gigabps-8023x': 9, 'empty': 17.
                 swL2PortInfoErrorDisabled 1.3.6.1.4.1.171.11.118.9.2.3.1.1.8 integer read-only
This object indicates the blocking type of this port. Enumeration: 'none': 0, 'storm': 1, 'unknow': 6, 'ctp-lbd': 3, 'ddm': 4, 'stp-lbd': 2, 'bpdu-protection': 5.
         swL2PortCtrlTable 1.3.6.1.4.1.171.11.118.9.2.3.2 no-access
A table that contains control information about every port.
             swL2PortCtrlEntry 1.3.6.1.4.1.171.11.118.9.2.3.2.1 no-access
A list of control information for each port on the device.
                 swL2PortCtrlPortIndex 1.3.6.1.4.1.171.11.118.9.2.3.2.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortCtrlMediumType 1.3.6.1.4.1.171.11.118.9.2.3.2.1.2 integer read-only
Indicates the medium type of the port number. Enumeration: 'copper': 1, 'fiber': 2.
                 swL2PortCtrlUnitIndex 1.3.6.1.4.1.171.11.118.9.2.3.2.1.3 integer read-only
Indicates the ID of the unit in the device
                 swL2PortCtrlAdminState 1.3.6.1.4.1.171.11.118.9.2.3.2.1.4 integer read-write
This object decides if the port is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlNwayState 1.3.6.1.4.1.171.11.118.9.2.3.2.1.5 integer read-write
Chose the port speed, duplex mode, and N-Way function mode. Enumeration: 'nway-disabled-10Mbps-Full': 4, 'nway-disabled-1Gigabps-Full-master': 9, 'nway-enabled': 2, 'nway-disabled-1Gigabps-Full': 8, 'nway-disabled-1Gigabps-Full-slave': 10, 'other': 1, 'nway-disabled-100Mbps-Full': 6, 'nway-disabled-1Gigabps-Half': 7, 'nway-disabled-10Mbps-Half': 3, 'nway-disabled-100Mbps-Half': 5.
                 swL2PortCtrlFlowCtrlState 1.3.6.1.4.1.171.11.118.9.2.3.2.1.6 integer read-write
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, the IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlLearningState 1.3.6.1.4.1.171.11.118.9.2.3.2.1.7 integer read-write
This object decides if the port is locked or not. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlMACNotifyState 1.3.6.1.4.1.171.11.118.9.2.3.2.1.8 integer read-write
This object sets each port's MAC notification state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlMDIXState 1.3.6.1.4.1.171.11.118.9.2.3.2.1.10 integer read-write
This object configures the MDIX setting of the port. Enumeration: 'auto': 1, 'cross': 3, 'normal': 2.
         swL2PortCtrlJumboFrame 1.3.6.1.4.1.171.11.118.9.2.3.3 integer read-write
This object configures the switch's jumbo frame settings. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swL2PortCtrlJumboFrameMaxSize 1.3.6.1.4.1.171.11.118.9.2.3.4 integer read-only
This object describes how many bytes the max jumbo frame is.
         swL2PortCounterCtrlTable 1.3.6.1.4.1.171.11.118.9.2.3.6 no-access
A table that is used to clear counter information about every port.
             swL2PortCounterCtrlEntry 1.3.6.1.4.1.171.11.118.9.2.3.6.1 no-access
A list of entries used to clear the counter information for each port of the device.
                 swL2PortCounterCtrlPortIndex 1.3.6.1.4.1.171.11.118.9.2.3.6.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortCounterClearCtrl 1.3.6.1.4.1.171.11.118.9.2.3.6.1.2 integer read-write
This object indicates whether to clear the counters for each port of the device or not. Enumeration: 'start': 2, 'other': 1.
         swL2PortJumboFrameCtrlTable 1.3.6.1.4.1.171.11.118.9.2.3.10 no-access
A table that contains information for each port's jumbo frame information.
               swL2PortJumboFrameCtrlEntry 1.3.6.1.4.1.171.11.118.9.2.3.10.1 no-access
A list of information for each port's jumbo frame of the device.
                   swL2PortJumboFrameCtrlPortIndex 1.3.6.1.4.1.171.11.118.9.2.3.10.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                   swL2PortJumboFrameCtrlPortState 1.3.6.1.4.1.171.11.118.9.2.3.10.1.2 integer read-write
This object indicates if the port's jumbo frame is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2TrunkMgmt 1.3.6.1.4.1.171.11.118.9.2.9
         swL2TrunkMaxSupportedEntries 1.3.6.1.4.1.171.11.118.9.2.9.1 integer read-only
Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable).
         swL2TrunkCurrentNumEntries 1.3.6.1.4.1.171.11.118.9.2.9.2 integer read-only
Current active number of entries in the trunk configuration table.
         swL2TrunkCtrlTable 1.3.6.1.4.1.171.11.118.9.2.9.3 no-access
This table specifies information about the logical port trunk groups.
             swL2TrunkCtrlEntry 1.3.6.1.4.1.171.11.118.9.2.9.3.1 no-access
A list of information about each logical port trunk group.
                 swL2TrunkIndex 1.3.6.1.4.1.171.11.118.9.2.9.3.1.1 integer read-only
The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module.
                 swL2TrunkMasterPort 1.3.6.1.4.1.171.11.118.9.2.9.3.1.3 integer read-only
This object indicates the master port number of the port trunk entry. When using Port Trunking, you cannot configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
                 swL2TrunkMember 1.3.6.1.4.1.171.11.118.9.2.9.3.1.4 portlist read-only
Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for one trunk group.
                 swL2TrunkFloodingPort 1.3.6.1.4.1.171.11.118.9.2.9.3.1.5 integer read-only
The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port.
                 swL2TrunkType 1.3.6.1.4.1.171.11.118.9.2.9.3.1.6 integer read-only
This object indicates the type of trunk group. static: is a static trunk group lacp: is a LACP trunk group. Enumeration: 'lacp': 3, 'other': 1, 'static': 2.
                 swL2TrunkState 1.3.6.1.4.1.171.11.118.9.2.9.3.1.7 rowstatus read-only
This object indicates the status of this entry.
         swL2TrunkAlgorithm 1.3.6.1.4.1.171.11.118.9.2.9.4 integer read-write
This object configures part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. Enumeration: 'ip-source': 5, 'mac-destination': 3, 'mac-source': 2, 'l4-source-dest-port': 10, 'mac-source-dest': 4, 'ip-source-dest': 7, 'ip-destination': 6, 'other': 1, 'l4-source-port': 8, 'l4-destination-port': 9.
         swL2TrunkLACPPortTable 1.3.6.1.4.1.171.11.118.9.2.9.5 no-access
This table specifies which ports are grouped together (this can be up to 8 ports) into a single logical link.
             swL2TrunkLACPPortEntry 1.3.6.1.4.1.171.11.118.9.2.9.5.1 no-access
A list of information specifying which ports are grouped together (this can be up to 8 ports) into a single logical link.
                 swL2TrunkLACPPortIndex 1.3.6.1.4.1.171.11.118.9.2.9.5.1.1 integer read-only
The index of logical port LACP.
                 swL2TrunkLACPPortState 1.3.6.1.4.1.171.11.118.9.2.9.5.1.2 integer read-write
The state of a logical port LACP. Enumeration: 'active': 1, 'passive': 2.
         swL2TrunkVLANTable 1.3.6.1.4.1.171.11.118.9.2.9.6 no-access
This table is used to manage the VLAN trunking feature of the device.
             swL2TrunkVLANEntry 1.3.6.1.4.1.171.11.118.9.2.9.6.1 no-access
This object is used to configure the VLAN trunking settings for each port.
                 swL2TrunkVLANPort 1.3.6.1.4.1.171.11.118.9.2.9.6.1.1 integer read-only
This object indicates the port being configured.
                 swL2TrunkVLANState 1.3.6.1.4.1.171.11.118.9.2.9.6.1.2 integer read-write
The state of the logical port VLAN trunk. Enumeration: 'disabled': 2, 'enabled': 1.
     swL2MirrorMgmt 1.3.6.1.4.1.171.11.118.9.2.10
           swL2MirrorLogicTargetPort 1.3.6.1.4.1.171.11.118.9.2.10.1 integer read-write
This object indicates which switch port will sniff another port. A trunk port member cannot be configured as a target snooping port. The port number is the sequential (logical) number, which is also applied to the bridge MIB, etc.
           swL2MirrorPortSourceIngress 1.3.6.1.4.1.171.11.118.9.2.10.2 portlist read-write
This represents the port where ingress packets will be sniffed.
           swL2MirrorPortSourceEgress 1.3.6.1.4.1.171.11.118.9.2.10.3 portlist read-write
This represents the port where egress packets will be sniffed.
           swL2MirrorPortState 1.3.6.1.4.1.171.11.118.9.2.10.4 integer read-write
This object indicates the port mirroring state. other (1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled (2) - After writing this value to the object, the corresponding entry will be removed from the table. enabled (3) - This entry resides in the table. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2MirrorGroupTable 1.3.6.1.4.1.171.11.118.9.2.10.5 no-access
This table specifies information about the Mirror group configuration.
               swL2MirrorGroupEntry 1.3.6.1.4.1.171.11.118.9.2.10.5.1 no-access
A list of information about each Mirror group configuration.
                   swL2MirrorGroupID 1.3.6.1.4.1.171.11.118.9.2.10.5.1.1 integer no-access
This object indicates the mirror group. The range of this object is (1..n), the value of n depends on detail project.
                   swL2MirrorGroupRowStatus 1.3.6.1.4.1.171.11.118.9.2.10.5.1.2 rowstatus read-only
This object manages this mirror group entry.
                   swL2MirrorGroupState 1.3.6.1.4.1.171.11.118.9.2.10.5.1.3 integer read-only
This object indicates the mirror group state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2MirrorGroupLogicTargetPort 1.3.6.1.4.1.171.11.118.9.2.10.5.1.4 integer read-only
This object indicates the mirror group target port.
                   swL2MirrorGroupPortSourceIngress 1.3.6.1.4.1.171.11.118.9.2.10.5.1.5 portlist read-only
This object indicates the mirror group ingress source ports.
                   swL2MirrorGroupPortSourceEngress 1.3.6.1.4.1.171.11.118.9.2.10.5.1.6 portlist read-only
This object indicates the mirror group engress source ports.
     swL2TrafficSegMgmt 1.3.6.1.4.1.171.11.118.9.2.14
           swL2TrafficSegTable 1.3.6.1.4.1.171.11.118.9.2.14.1 no-access
This table specifies that the port can just forward traffic to the specific port list.
               swL2TrafficSegEntry 1.3.6.1.4.1.171.11.118.9.2.14.1.1 no-access
A list of information which specifies the port with its traffic forwarding list.
                   swL2TrafficSegPort 1.3.6.1.4.1.171.11.118.9.2.14.1.1.1 integer read-only
The port number of the logical port.
                   swL2TrafficSegForwardPorts 1.3.6.1.4.1.171.11.118.9.2.14.1.1.2 portlist read-write
The port list where a specific port can forward traffic.
     swL2MulticastFilterMode 1.3.6.1.4.1.171.11.118.9.2.17
           swL2MulticastFilterModeVlanTable 1.3.6.1.4.1.171.11.118.9.2.17.1 no-access
A table that contains information about the VLAN multicast filter mode.
               swL2MulticastFilterModeVlanEntry 1.3.6.1.4.1.171.11.118.9.2.17.1.1 no-access
A list of multicast filter mode information for each VLAN.
                   swL2MulticastFilterVid 1.3.6.1.4.1.171.11.118.9.2.17.1.1.1 integer read-only
Indicates the VID for each VLAN.
                   swL2MulticastFilterVlanMode 1.3.6.1.4.1.171.11.118.9.2.17.1.1.2 integer read-write
Specifies the multicast filter mode for each VLAN. Enumeration: 'forward-unregistered-groups': 2, 'forward-all-groups': 1, 'filter-unregistered-groups': 3.
     swL2MgmtMIBTraps 1.3.6.1.4.1.171.11.118.9.2.100
             swL2Notify 1.3.6.1.4.1.171.11.118.9.2.100.1
                 swL2NotifyMgmt 1.3.6.1.4.1.171.11.118.9.2.100.1.1
                     swL2macNotificationSeverity 1.3.6.1.4.1.171.11.118.9.2.100.1.1.1 agentnotifylevel read-write
Indicates the level of macNotification detection.
                     swL2PortSecurityViolationSeverity 1.3.6.1.4.1.171.11.118.9.2.100.1.1.2 agentnotifylevel read-write
Indicates the level of PortSecurityViolation detection.
                 swL2NotifyPrefix 1.3.6.1.4.1.171.11.118.9.2.100.1.2
                     swL2NotifFirmware 1.3.6.1.4.1.171.11.118.9.2.100.1.2.0
                         swL2macNotification 1.3.6.1.4.1.171.11.118.9.2.100.1.2.0.1
This trap indicates the MAC address variations in the address table .
                         swL2PortSecurityViolationTrap 1.3.6.1.4.1.171.11.118.9.2.100.1.2.0.2
When the port_security trap is enabled, new MAC addresses that violate the pre-defined port security configuration will trigger trap messages to be sent out.
                     swl2NotificationBidings 1.3.6.1.4.1.171.11.118.9.2.100.1.2.1
                         swL2macNotifyInfo 1.3.6.1.4.1.171.11.118.9.2.100.1.2.1.1 octet string read-only
This object indicates information about the last time the system rebooted.
                         swL2PortSecurityViolationMac 1.3.6.1.4.1.171.11.118.9.2.100.1.2.1.2 macaddress no-access
This object indicates the MAC address that violated the port security configuration.