DGS-1210-28XSME-BX: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DGS-1210-28XSME-BX
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 d_link 1.3.6.1.4.1.171
         dlink_products 1.3.6.1.4.1.171.10
               dlink_DGS12XXSeriesProd 1.3.6.1.4.1.171.10.76
                     dgs_1210_28xscme 1.3.6.1.4.1.171.10.76.39
                           dgs_1210_28xscmebx 1.3.6.1.4.1.171.10.76.39.1
DES-1210-52ME add QinQ Miss Drop and Add Inner Tag.
                               companySystem 1.3.6.1.4.1.171.10.76.39.1.1
                                   sysSwitchName 1.3.6.1.4.1.171.10.76.39.1.1.1 displaystring read-write
System name used for identification of the device. The following characters are allowed to input. 0 ~ 9 / a ~ z / A ~ Z Special character: ( ) V + _ = .
                                   sysHardwareVersion 1.3.6.1.4.1.171.10.76.39.1.1.2 displaystring read-only
Version number of the Hardware.
                                   sysFirmwareVersion 1.3.6.1.4.1.171.10.76.39.1.1.3 displaystring read-only
Version number of the Firmware.
                                   sysLoginTimeoutInterval 1.3.6.1.4.1.171.10.76.39.1.1.4 integer32 read-write
This time interval is used to count the time and logout web interface automatically.
                                   sysLocationName 1.3.6.1.4.1.171.10.76.39.1.1.5 displaystring read-write
The location name of this node (e.g., `telephone closet, 3rd floor'). If the location is unknown, the value is the zero-length string.
                                   sysGroupInterval 1.3.6.1.4.1.171.10.76.39.1.1.6 integer32 read-write
Group Interval is used to send D-link Discover packet to D-link SmartConsole Utility frequency. The timer in units of seconds. Set value 0 to disable group Interval.
                                   sysSystemPassword 1.3.6.1.4.1.171.10.76.39.1.1.7 displaystring read-write
This object is used to set System Password, The following characters are allowed to input: semicolon, question mark, space, and double quotation mark.
                                   sysSafeGuardEnable 1.3.6.1.4.1.171.10.76.39.1.1.8 integer read-write
This object is used to set Safeguard Enable\Disable. Enumeration: 'enable': 1, 'disable': 2.
                                   sysRestart 1.3.6.1.4.1.171.10.76.39.1.1.9 truthvalue read-write
This object allows the user to restart the Switch (i.e)the entire switch will operationally go down and start again. Setting a value of 'true' causes the switch to be restarted. When the switch operationally goes down, configuration save operation is initiated based on the configuration save option chosen. When the switch operationally come up, the saved configurations are restored based on the restore option chosen. Once the switch is restarted, the value of this object reverts to 'false'.
                                   sysSave 1.3.6.1.4.1.171.10.76.39.1.1.10 integer read-write
This object is used to save Configuration , value 1 save config_1 , value 2 is not in process , value 3 is save config_1 and value 4 is save config_2. Enumeration: 'config-1': 3, 'false': 2, 'config-2': 4, 'true': 1.
                                   sysPowerSavingEnable 1.3.6.1.4.1.171.10.76.39.1.1.11 integer read-write
The Power Saving mode is capable of reducing power consumption automatically when connected devices are switched off or cable length less than 20meters. By reducing power consumption, less heat is produced, resulting in extended product life and lower operating costs. By default, the Power Saving mode is enabled. Enumeration: 'enable': 1, 'disable': 2.
                                   sysJumboFrameEnable 1.3.6.1.4.1.171.10.76.39.1.1.12 integer read-write
Gigabit Web Smart Switches support jumbo frames (frames larger than the Ethernet frame size of 1522 bytes) of up to 10,000 bytes (tagged). Default jumbo frame is disabled. Enumeration: 'enable': 1, 'disable': 2.
                                   sysPortCtrlTable 1.3.6.1.4.1.171.10.76.39.1.1.13 no-access
A table to control the port specific parameters of the device like speed, duplex mode, etc.
                                         sysPortCtrlEntry 1.3.6.1.4.1.171.10.76.39.1.1.13.1 no-access
An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
                                             sysPortCtrlIndex 1.3.6.1.4.1.171.10.76.39.1.1.13.1.1 integer32 read-only
Interface index of the port for the configuration in this entry applies.
                                             sysPortCtrlMediumType 1.3.6.1.4.1.171.10.76.39.1.1.13.1.2 integer read-only
This object indicates the port type: fiber 1G/100M or copper. Enumeration: 'copper': 1, 'fiber': 2.
                                             sysPortCtrlSpeed 1.3.6.1.4.1.171.10.76.39.1.1.13.1.3 integer read-write
Configures interface speed. Enumeration: 'rate100M-Half': 3, 'auto': 6, 'rate1000M-Full': 1, 'rate10M-Full': 4, 'disable': 7, 'rate10M-Half': 5, 'rate100M-Full': 2.
                                             sysPortCtrlOperStatus 1.3.6.1.4.1.171.10.76.39.1.1.13.1.4 integer read-only
The port's operating speed state. Enumeration: 'rate10M-Full': 5, 'rate100M-Half': 4, 'rate1000M-Full': 2, 'rate10G-Full': 7, 'down': 1, 'rate10M-Half': 6, 'rate100M-Full': 3.
                                             sysPortCtrlMDI 1.3.6.1.4.1.171.10.76.39.1.1.13.1.5 integer read-write
Configures interface auto/mdi/mdix mode. The default setting is Auto. Enumeration: 'auto': 1, 'mdi': 2, 'mdix': 3.
                                             sysPortCtrlFlowControl 1.3.6.1.4.1.171.10.76.39.1.1.13.1.6 integer read-write
Enables / disables flow control for the interface. Enumeration: 'enable': 1, 'disable': 2.
                                             sysPortCtrlFlowControlOper 1.3.6.1.4.1.171.10.76.39.1.1.13.1.7 integer read-only
The link parner negotiate port's operating flow control state. Enumeration: 'disabled': 2, 'enabled': 1.
                                             sysPortCtrlType 1.3.6.1.4.1.171.10.76.39.1.1.13.1.8 integer read-only
The port's media type. Enumeration: 'fiberwith100BaseSFPModule': 3, 'gigabitethernet': 2, 'fiberwith10GBaseSFPModule': 5, 'fiberwith1GBaseSFPModule': 4, 'fastethernet': 1.
                                             sysPortCtrlCapability 1.3.6.1.4.1.171.10.76.39.1.1.13.1.9 bits read-write
The port's capability advertised. Bits: 'rate100-half': 2, 'rate1000-full': 5, 'rate10-full': 1, 'rate100-full': 3, 'rate10-half': 0, 'reserve': 4.
                                   sysPortDescriptionTable 1.3.6.1.4.1.171.10.76.39.1.1.14 no-access
The port description table.
                                         sysPortDescriptionEntry 1.3.6.1.4.1.171.10.76.39.1.1.14.1 no-access
The port description entry.
                                             sysPortDescIndex 1.3.6.1.4.1.171.10.76.39.1.1.14.1.1 integer read-only
This object indicates the port index.
                                             sysPortDescMediumType 1.3.6.1.4.1.171.10.76.39.1.1.14.1.2 integer read-only
This object indicates the port type: fiber 1G/100M or copper. Enumeration: 'copper': 1, 'fiber': 2.
                                             sysPortDescString 1.3.6.1.4.1.171.10.76.39.1.1.14.1.3 displaystring read-write
This object indicates the port description.
                                             sysPortUpLinkTime 1.3.6.1.4.1.171.10.76.39.1.1.14.1.4 displaystring read-only
This object indicates the port link up time.
                                   sysPortErrTable 1.3.6.1.4.1.171.10.76.39.1.1.15 no-access
The port error table.
                                         sysPortErrEntry 1.3.6.1.4.1.171.10.76.39.1.1.15.1 no-access
A list of information for the err port of the device.
                                             sysPortErrPortIndex 1.3.6.1.4.1.171.10.76.39.1.1.15.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                                             sysPortErrPortState 1.3.6.1.4.1.171.10.76.39.1.1.15.1.2 integer read-only
This object decides whether the port state is enabled or disabled. Enumeration: 'disabled': 1, 'enabled': 2.
                                             sysPortErrPortStatus 1.3.6.1.4.1.171.10.76.39.1.1.15.1.3 integer read-only
This object decides whether the PortStatus is err-disabled. Enumeration: 'other': 1, 'err-disabled': 2.
                                             sysPortErrPortReason 1.3.6.1.4.1.171.10.76.39.1.1.15.1.4 integer read-only
This object decides whether the PortStatus is LBD. Enumeration: 'traffic-control': 2, 'lbd': 1, 'bpdu-protection': 4, 'duld': 3.
                                   sysDhcpAutoConfiguration 1.3.6.1.4.1.171.10.76.39.1.1.16 integer read-write
This object indicates auto config is enabled or disabled. Enumeration: 'enable': 1, 'disable': 2.
                                   sysWebState 1.3.6.1.4.1.171.10.76.39.1.1.17 integer read-write
This object is for Enabled(1) or Disabled(2) Web state in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                   sysWebPortNumber 1.3.6.1.4.1.171.10.76.39.1.1.18 integer32 read-write
Web Server Port Number.
                                   sysARPAgingTime 1.3.6.1.4.1.171.10.76.39.1.1.19 integer read-write
This object is for ARP aging time.
                                   sysMACAgingTime 1.3.6.1.4.1.171.10.76.39.1.1.20 integer read-write
This object is for MAC aging time.
                                   baudRateConfiguration 1.3.6.1.4.1.171.10.76.39.1.1.21 integer read-write
To set SerialPort baud-rate configuration. Enumeration: 'baudrate19200': 19200, 'baudrate38400': 38400, 'baudrate115200': 115200, 'baudrate9600': 9600.
                                   autologoutConfiguration 1.3.6.1.4.1.171.10.76.39.1.1.22 integer read-write
To set SerialPort auto-logout-time configuration. Enumeration: 'logouttime10mins': 600, 'logouttime15mins': 900, 'logouttime2mins': 120, 'logouttime5mins': 300, 'logouttimenever': 0.
                                   telnetsettingManagementOnOff 1.3.6.1.4.1.171.10.76.39.1.1.23 integer read-write
Enable/Disable management Telnetsetting mechanism. Enumeration: 'disabled': 2, 'enabled': 1.
                                   telnetUDPPort 1.3.6.1.4.1.171.10.76.39.1.1.24 integer read-write
The value is for setting telnet's UDP Port.
                                   autoRefreshConfiguration 1.3.6.1.4.1.171.10.76.39.1.1.25 integer read-write
To set the WEB panel auto refresh timer. Enumeration: 'refreshtime1min': 3, 'refreshtime5mins': 4, 'refreshtime30secs': 2, 'refreshimenever': 0, 'refreshtime10secs': 1.
                                   floodfdbOnOff 1.3.6.1.4.1.171.10.76.39.1.1.26 integer read-write
To set enable status for flood fdb. Enumeration: 'disabled': 2, 'enabled': 1.
                                   sysContactName 1.3.6.1.4.1.171.10.76.39.1.1.27 displaystring read-write
To set system contact name.
                                   sysDhcpAutoConfigTimeout 1.3.6.1.4.1.171.10.76.39.1.1.28 integer read-write
To set dhcp auto config timeout.
                                   sysCommandLogging 1.3.6.1.4.1.171.10.76.39.1.1.29 integer read-write
To set enable status for CommandLogging. Enumeration: 'enable': 1, 'disable': 2.
                                   sysSerialNumber 1.3.6.1.4.1.171.10.76.39.1.1.30 displaystring read-only
To get the serial number.
                                   sysFirmwareInfomation 1.3.6.1.4.1.171.10.76.39.1.1.31
                                         sysVersion 1.3.6.1.4.1.171.10.76.39.1.1.31.1 displaystring read-only
The version of firmware information.
                                         sysSize 1.3.6.1.4.1.171.10.76.39.1.1.31.2 integer32 read-only
The size of firmware information.
                                         sysUpdateTime 1.3.6.1.4.1.171.10.76.39.1.1.31.3 displaystring read-only
The Update Time of firmware information.
                                         sysFromIP 1.3.6.1.4.1.171.10.76.39.1.1.31.4 ipaddress read-only
The IP address of firmware information.
                                         sysUser 1.3.6.1.4.1.171.10.76.39.1.1.31.5 displaystring read-only
The user of firmware infomation.
                                         sysType 1.3.6.1.4.1.171.10.76.39.1.1.31.6 integer read-only
The type of firmware infomation. Enumeration: 'web': 4, 'console': 1, 'ssh': 3, 'telnet': 2, 'unknown': -1.
                                   sysDdp 1.3.6.1.4.1.171.10.76.39.1.1.32
                                         sysDdpGlobalOnOff 1.3.6.1.4.1.171.10.76.39.1.1.32.1 integer read-write
This object indicates D-Link discover protocol is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                         sysDdpGeneralReportOnOff 1.3.6.1.4.1.171.10.76.39.1.1.32.2 integer read-write
This object indicates D-Link discover protocol report is enabled or disabled. This object only can be modified when D-Link discover protocol state is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                         sysDdpGeneralReportTimer 1.3.6.1.4.1.171.10.76.39.1.1.32.3 integer read-write
This object indicates D-Link discover protocol report time period. This object only can be modified when both D-Link discover protocol state and D-Link discover protocol report state are enabled. Enumeration: 'time30seconds': 30, 'time60seconds': 60, 'time90seconds': 90, 'time120seconds': 120.
                                         sysDdpPortStatusTable 1.3.6.1.4.1.171.10.76.39.1.1.32.4 no-access
A table to control the port status of D-Link discover protocol.
                                             sysDdpPortStatusEntry 1.3.6.1.4.1.171.10.76.39.1.1.32.4.1 no-access
An entry appears in this table for each port D-Link discover protocol status.
                                                 sysDdpPortStatusIndex 1.3.6.1.4.1.171.10.76.39.1.1.32.4.1.1 integer32 read-only
Interface index of the port for the configuration in this entry applies.
                                                 sysDdpPortStatusControl 1.3.6.1.4.1.171.10.76.39.1.1.32.4.1.2 integer read-write
Configures the port status of D-Link discover protocol. Enumeration: 'disabled': 2, 'enabled': 1.
                                   sysSmartFan 1.3.6.1.4.1.171.10.76.39.1.1.33
                                         sysSmartFanStatus 1.3.6.1.4.1.171.10.76.39.1.1.33.1 integer read-only
The Fan status for this device. Enumeration: 'failure': 0, 'normal': 1.
                                   sysDhcpAutoImage 1.3.6.1.4.1.171.10.76.39.1.1.34 integer read-write
This object indicates auto image is enabled or disabled. Enumeration: 'enable': 1, 'disable': 2.
                                   sysBootupConfigID 1.3.6.1.4.1.171.10.76.39.1.1.35 integer read-write
To get/set bootup config ID.
                                   sysBootupImage 1.3.6.1.4.1.171.10.76.39.1.1.36 integer read-write
To get/set bootup Image.
                                   sysPortMediaTypeTable 1.3.6.1.4.1.171.10.76.39.1.1.37 no-access
A table to control the port specific parameters of the device like speed, Vendor name, etc.
                                         sysPortMediaTypeEntry 1.3.6.1.4.1.171.10.76.39.1.1.37.1 no-access
An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
                                             sysPortMediaTypeIndex 1.3.6.1.4.1.171.10.76.39.1.1.37.1.1 integer32 read-only
Interface index of the port for the configuration in this entry applies.
                                             sysPortMediaType 1.3.6.1.4.1.171.10.76.39.1.1.37.1.2 integer read-only
This object indicates the port type: fiber 1G/100M or copper. Enumeration: 'copper': 1, 'fiber': 2.
                                             sysPortType 1.3.6.1.4.1.171.10.76.39.1.1.37.1.3 integer read-only
Configures interface speed. Enumeration: 'rate100M': 1, 'rate1000M': 2.
                                             sysPortMediaTypeVendorName 1.3.6.1.4.1.171.10.76.39.1.1.37.1.4 displaystring read-only
The port's VendorName.
                                             sysPortMediaTypeOui 1.3.6.1.4.1.171.10.76.39.1.1.37.1.5 displaystring read-only
The port's Oui.
                                             sysPortMediaTypePn 1.3.6.1.4.1.171.10.76.39.1.1.37.1.6 displaystring read-only
The port's Pn.
                                             sysPortMediaTypeRev 1.3.6.1.4.1.171.10.76.39.1.1.37.1.7 displaystring read-only
The port's Rev.
                                             sysPortMediaTypeSn 1.3.6.1.4.1.171.10.76.39.1.1.37.1.8 displaystring read-only
The port's Sn.
                                             sysPortMediaTypeDateCode 1.3.6.1.4.1.171.10.76.39.1.1.37.1.9 displaystring read-only
The port's DateCode.
                               companyIpifGroup 1.3.6.1.4.1.171.10.76.39.1.2
                                   ipv4sysIpAddrCfgMode 1.3.6.1.4.1.171.10.76.39.1.2.1 integer read-write
Specifies the means by which the default interface in the device gets the IP address. If 'manual' mode is selected, the default interface takes the 'sysDefaultIpAddr' configured in the system. If 'dynamic' mode is selected, the default interface gets the IP address through dynamic IP address configuration protocols such as RARP client, BootP client, DHCP Client, etc. If the system fails to get the IP address dynamically through all the above protocols, the default interface uses the 'sysDefaultIpAddr' configured in the system. Enumeration: 'dynamic': 2, 'manual': 1.
                                   ipv4sysIpAddr 1.3.6.1.4.1.171.10.76.39.1.2.2 ipaddress read-write
Default IP Address of the system. This IP address, if modified, will take effect only when the configuration is stored & restored.
                                   ipv4sysIpSubnetMask 1.3.6.1.4.1.171.10.76.39.1.2.3 ipaddress read-write
IP subnet mask for the default IP address. This subnet mask, if modified, will take effect only when the configuration is stored & restored.
                                   ipv4sysGateway 1.3.6.1.4.1.171.10.76.39.1.2.4 ipaddress read-write
Gateway
                                   ipv4dhcpOption12Status 1.3.6.1.4.1.171.10.76.39.1.2.5 integer read-write
Status of DHCP Option12 Enumeration: 'enable': 1, 'disable': 2.
                                   ipv4dhcpOption12HostName 1.3.6.1.4.1.171.10.76.39.1.2.6 octet string read-write
Host name in DHCP option 12
                                   ipifSupportV4V6Info 1.3.6.1.4.1.171.10.76.39.1.2.7
                                       sysIpAddrCfgMode 1.3.6.1.4.1.171.10.76.39.1.2.7.1 integer read-write
Specifies the means by which the default interface in the device gets the IP address. If 'manual' mode is selected, the default interface takes the 'sysDefaultIpAddr' configured in the system. If 'dynamic' mode is selected, the default interface gets the IP address through dynamic IP address configuration protocols such as RARP client, BootP client, DHCP Client, etc. If the system fails to get the IP address dynamically through all the above protocols, the default interface uses the 'sysDefaultIpAddr' configured in the system. Enumeration: 'dynamic': 2, 'manual': 1.
                                       sysIpAddr 1.3.6.1.4.1.171.10.76.39.1.2.7.2 ipaddress read-write
Default IP Address of the system. This IP address, if modified, will take effect only when the configuration is stored & restored.
                                       sysIpSubnetMask 1.3.6.1.4.1.171.10.76.39.1.2.7.3 ipaddress read-write
IP subnet mask for the default IP address. This subnet mask, if modified, will take effect only when the configuration is stored & restored.
                                       sysGateway 1.3.6.1.4.1.171.10.76.39.1.2.7.4 ipaddress read-write
Gateway
                                       dhcpOption12Status 1.3.6.1.4.1.171.10.76.39.1.2.7.5 integer read-write
Status of DHCP Option12 Enumeration: 'enable': 1, 'disable': 2.
                                       dhcpOption12HostName 1.3.6.1.4.1.171.10.76.39.1.2.7.6 octet string read-write
Host name in DHCP option 12
                                       ipifName 1.3.6.1.4.1.171.10.76.39.1.2.7.7 octet string read-only
The Description for the interface.
                                       ipifVLANname 1.3.6.1.4.1.171.10.76.39.1.2.7.8 octet string read-only
The vlan name for the interface.
                                       ipifv6GlobalStatus 1.3.6.1.4.1.171.10.76.39.1.2.7.9 integer read-write
The ID of VLAN that you want this interface to be in. It must be a exist vlan id. Enumeration: 'enable': 1, 'disable': 2.
                                       ipifv6DHCPStatus 1.3.6.1.4.1.171.10.76.39.1.2.7.10 integer read-write
The state of DHCPv6 that you want this interface to be in. It must be a exist vlan id. Enumeration: 'enable': 1, 'disable': 2.
                                       ipifv6AutolinkloStatus 1.3.6.1.4.1.171.10.76.39.1.2.7.11 integer read-write
The global state of link local that you want this interface to be in. It must be a exist vlan id. Enumeration: 'enable': 1, 'disable': 2.
                                       ipifv6NSRetransmitTime 1.3.6.1.4.1.171.10.76.39.1.2.7.12 integer read-write
The NS's retransmit time that you want this interface to be in. It must be a exist vlan id (1~3600).
                                       ipifv6DefaultGateway 1.3.6.1.4.1.171.10.76.39.1.2.7.13 ipv6address read-write
The ipv6 default gateway that you want this interface to be in. It must be a exist vlan id.
                                       ipifV6AddressTable 1.3.6.1.4.1.171.10.76.39.1.2.7.14 no-access
A list of interface entries.
                                             ipifV6AddressEntry 1.3.6.1.4.1.171.10.76.39.1.2.7.14.1 no-access
An entry containing management information applicable to a particular interface.
                                                 ipifV6AddressMainIndex 1.3.6.1.4.1.171.10.76.39.1.2.7.14.1.1 interfaceindex read-only
The index of this IPv6 entry.
                                                 ipifV6AddressIpAddr 1.3.6.1.4.1.171.10.76.39.1.2.7.14.1.2 ipv6address read-only
The ip address of this IPv6 entry.
                                                 ipifV6AddressIpPrefix 1.3.6.1.4.1.171.10.76.39.1.2.7.14.1.3 integer read-only
The ip prefix of this IPv6 entry.
                                                 ipifV6AddressIpType 1.3.6.1.4.1.171.10.76.39.1.2.7.14.1.4 integer read-only
The ip type of this IPv6 entry. Enumeration: 'unicast': 1, 'linklocal': 3, 'anycast': 2.
                                                 ipifV6AddressRowStatus 1.3.6.1.4.1.171.10.76.39.1.2.7.14.1.5 rowstatus read-only
The status of an entry in the Multi Interface Table. Only a subset of the rowstatus variables (active, createAndWait, destroy) are available.
                                   ipv4sysIprouteGateway 1.3.6.1.4.1.171.10.76.39.1.2.8 ipaddress read-write
IProute Gateway of the system.
                                   ipv4sysIprouteHops 1.3.6.1.4.1.171.10.76.39.1.2.9 integer read-write
IProute Hops of the system.
                               companyTftpGroup 1.3.6.1.4.1.171.10.76.39.1.3
                                   tftpFwServerIpAddress 1.3.6.1.4.1.171.10.76.39.1.3.1 ipaddress read-write
The TFTP server's IP address is used to upload or download firmware.
                                   tftpFwImageFileName 1.3.6.1.4.1.171.10.76.39.1.3.2 displaystring read-write
Configure firmware filename to download.
                                   tftpFwTftpOperation 1.3.6.1.4.1.171.10.76.39.1.3.3 integer read-write
The tftp operates to perform downloading the firmware image to the unit. This object is used in conjunction with configBootTftpServerIp and configBootImageFileName. Enumeration: 'download': 1, 'none': 0, 'upload': 2.
                                   tftpFwTftpOperationStatus 1.3.6.1.4.1.171.10.76.39.1.3.4 integer read-only
The tftp operation status represent firmware backup or upgrade status. Enumeration: 'fail': 2, 'transmit': 4, 'none': 0, 'progressing': 3, 'success': 1.
                                   tftpCfgServerIpAddress 1.3.6.1.4.1.171.10.76.39.1.3.5 ipaddress read-write
The TFTP server's IP address is used to upload or download configuration file.
                                   tftpConfigFileName 1.3.6.1.4.1.171.10.76.39.1.3.6 displaystring read-write
The configuration filename is used to store or retrieve config from the tftp server.
                                   tftpConfigTftpOperation 1.3.6.1.4.1.171.10.76.39.1.3.7 integer read-write
The tftp operates to perform either downloading the configuration file to the unit or uploading the current configuration file to the tftp server. This object is used in conjunction with configTftpServerIpAddress and configTftpServerFileName. Enumeration: 'download': 1, 'progressing': 3, 'upload': 2.
                                   tftpConfigTftpOperationStatus 1.3.6.1.4.1.171.10.76.39.1.3.8 integer read-only
The tftp operation status represent configuration file backup or restore status. Enumeration: 'fail': 2, 'none': 0, 'progressing': 3, 'success': 1.
                                   tftpFwTargetGroup 1.3.6.1.4.1.171.10.76.39.1.3.9
                                       tftpFwTargetServerIpAddress 1.3.6.1.4.1.171.10.76.39.1.3.9.1 ipv6address read-write
The TFTP server's IP address is used to upload or download firmware.
                                       tftpFwTargetServerIpType 1.3.6.1.4.1.171.10.76.39.1.3.9.2 integer read-write
Type of IP interface. Enumeration: 'iPv4': 1, 'iPv6': 2.
                                       tftpFwTargetInterfaceName 1.3.6.1.4.1.171.10.76.39.1.3.9.3 octet string read-write
Specifies the interface name when the tftpFwTargetServerIpAddress is linklocal address.
                                       tftpFwTargetImageFileName 1.3.6.1.4.1.171.10.76.39.1.3.9.4 displaystring read-write
Configure firmware filename to download.
                                       tftpFwTargetTftpOperation 1.3.6.1.4.1.171.10.76.39.1.3.9.5 integer read-write
The tftp operates to perform downloading the firmware image to the unit. This object is used in conjunction with configBootTftpServerIp and configBootImageFileName. Enumeration: 'download': 1, 'none': 0, 'upload': 2.
                                       tftpFwTargetTftpOperationStatus 1.3.6.1.4.1.171.10.76.39.1.3.9.6 integer read-only
The tftp operation status represent firmware backup or upgrade status. Enumeration: 'fail': 2, 'transmit': 4, 'none': 0, 'progressing': 3, 'success': 1.
                                   tftpCfgTargetGroup 1.3.6.1.4.1.171.10.76.39.1.3.10
                                         tftpCfgTargetServerIpAddress 1.3.6.1.4.1.171.10.76.39.1.3.10.1 ipv6address read-write
The TFTP server's IP address is used to upload or download configuration file.
                                         tftpCfgTargetServerIpType 1.3.6.1.4.1.171.10.76.39.1.3.10.2 integer read-write
Type of IP interface. Enumeration: 'iPv4': 1, 'iPv6': 2.
                                         tftpCfgTargetInterfaceName 1.3.6.1.4.1.171.10.76.39.1.3.10.3 octet string read-write
Specifies the interface name when the tftpCfgTargetServerIpAddress is linklocal address.
                                         tftpCfgTargetImageFileName 1.3.6.1.4.1.171.10.76.39.1.3.10.4 displaystring read-write
The configuration filename is used to store or retrieve config from the tftp server.
                                         tftpCfgTargetTftpOperation 1.3.6.1.4.1.171.10.76.39.1.3.10.5 integer read-write
The tftp operates to perform either downloading the configuration file to the unit or uploading the current configuration file to the tftp server. This object is used in conjunction with configTftpServerIpAddress and configTftpServerFileName. Enumeration: 'download': 1, 'progressing': 3, 'upload': 2.
                                         tftpCfgTargetTftpOperationStatus 1.3.6.1.4.1.171.10.76.39.1.3.10.6 integer read-only
The tftp operation status represent configuration file backup or restore status. Enumeration: 'fail': 2, 'none': 0, 'progressing': 3, 'success': 1.
                                         tftpCfgTargetConfigID 1.3.6.1.4.1.171.10.76.39.1.3.10.7 integer read-write
The tftp operates to perform either downloading the configuration file to the unit or uploading the current configuration file to the tftp server. This object is used in conjunction with configTftpServerIpAddress and configTftpServerFileName. Enumeration: 'config1': 1, 'config2': 2.
                               companyMiscGroup 1.3.6.1.4.1.171.10.76.39.1.4
                                   miscReset 1.3.6.1.4.1.171.10.76.39.1.4.2 integer read-write
Physically resets the unit - use with care. A (1) resets the unit, a (2) does nothing. Enumeration: 'reset': 1, 'noop': 2.
                                   miscStatisticsReset 1.3.6.1.4.1.171.10.76.39.1.4.3 integer read-write
Resets the units statistics. A (1) resets the statistics count, a (2) does nothing. Enumeration: 'reset': 1, 'noop': 2.
                               companySNMPV3 1.3.6.1.4.1.171.10.76.39.1.5
                                   snmpGlobalState 1.3.6.1.4.1.171.10.76.39.1.5.1 integer read-write
This object is for enabling or disabling SNMP Community function. Enumeration: 'disabled': 2, 'enabled': 1.
                                   snmpV3User 1.3.6.1.4.1.171.10.76.39.1.5.2
                                       snmpV3UserTable 1.3.6.1.4.1.171.10.76.39.1.5.2.1 no-access
                                           snmpV3UserEntry 1.3.6.1.4.1.171.10.76.39.1.5.2.1.1 no-access
                                               snmpV3UserName 1.3.6.1.4.1.171.10.76.39.1.5.2.1.1.1 snmpadminstring read-only
A human readable string representing the name of the user. This is the (User-based Security) Model dependent security ID.
                                               snmpV3UserVersion 1.3.6.1.4.1.171.10.76.39.1.5.2.1.1.2 integer read-only
A human readable string representing the name of the user. This is the (User-based Security) Model dependent security ID. Enumeration: 'v2c': 2, 'v1': 1, 'v3': 3.
                                               snmpV3UserGroupName 1.3.6.1.4.1.171.10.76.39.1.5.2.1.1.3 snmpadminstring read-only
The name of the group to which this entry (e.g., the combination of securityModel and securityName) belongs. This groupName is used as index into the vacmAccessTable to select an access control policy. However, a value in this table does not imply that an instance with the value exists in table vacmAccesTable.
                                               snmpV3UserAuthProtocol 1.3.6.1.4.1.171.10.76.39.1.5.2.1.1.4 integer read-only
An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be authenticated, and if so, the type of authentication protocol which is used. An instance of this object is created concurrently with the creation of any other object instance for the same user (i.e., as part of the processing of the set operation which creates the first object instance in the same conceptual row). If an initial set operation (i.e. at row creation time) tries to set a value for an unknown or unsupported protocol, then a 'wrongValue' error must be returned. The value will be overwritten/set when a set operation is performed on the corresponding instance of UserCloneFrom. Once instantiated, the value of such an instance of this object can only be changed via a set operation to the value of the NoAuthProtocol. If a set operation tries to change the value of an existing instance of this object to any value other than NoAuthProtocol, then an 'inconsistentValue' error must be returned. If a set operation tries to set the value to the NoAuthProtocol while the UserPrivProtocol value in the same row is not equal to NoPrivProtocol, then an 'inconsistentValue' error must be returned. That means that an SNMP command generator application must first ensure that the UserPrivProtocol is set to the NoPrivProtocol value before it can set the UserAuthProtocol value to NoAuthProtocol. Enumeration: 'sha': 3, 'none': 1, 'md5': 2.
                                               snmpV3UserAuthProtocolPassword 1.3.6.1.4.1.171.10.76.39.1.5.2.1.1.5 snmpadminstring read-only
                                               snmpV3UserPrivProtocol 1.3.6.1.4.1.171.10.76.39.1.5.2.1.1.6 integer read-only
An indication of whether messages sent on behalf of this user to/from the SNMP engine identified by usmUserEngineID, can be protected from disclosure, and if so, the type of privacy protocol which is used. An instance of this object is created concurrently with the creation of any other object instance for the same user (i.e., as part of the processing of the set operation which creates the first object instance in the same conceptual row). If an initial set operation (i.e. at row creation time) tries to set a value for an unknown or unsupported protocol, then a 'wrongValue' error must be returned. The value will be overwritten/set when a set operation is performed on the corresponding instance of usmUserCloneFrom. Once instantiated, the value of such an instance of this object can only be changed via a set operation to the value of the NoPrivProtocol. If a set operation tries to change the value of an existing instance of this object to any value other than NoPrivProtocol, then an 'inconsistentValue' error must be returned. Note that if any privacy protocol is used, then you must also use an authentication protocol. In other words, if usmUserPrivProtocol is set to anything else than NoPrivProtocol, then the corresponding instance of usmUserAuthProtocol cannot have a value of usmNoAuthProtocol. If it does, then an 'inconsistentValue' error must be returned. Enumeration: 'none': 1, 'des': 2.
                                               snmpV3UserPrivProtocolPassword 1.3.6.1.4.1.171.10.76.39.1.5.2.1.1.7 snmpadminstring read-only
                                               snmpV3UserStatus 1.3.6.1.4.1.171.10.76.39.1.5.2.1.1.8 rowstatus read-only
The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the usmUserStatus column is 'notReady'. In particular, a newly created row for a user who employs authentication, cannot be made active until the corresponding usmUserCloneFrom and usmUserAuthKeyChange have been set. Further, a newly created row for a user who also employs privacy, cannot be made active until the usmUserPrivKeyChange has been set. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this conceptual row can be modified, except for usmUserOwnAuthKeyChange and usmUserOwnPrivKeyChange. For these 2 objects, the value of usmUserStatus MUST be active.
                                   snmpV3Group 1.3.6.1.4.1.171.10.76.39.1.5.3
                                       snmpV3GroupTable 1.3.6.1.4.1.171.10.76.39.1.5.3.1 no-access
                                           snmpV3GroupEntry 1.3.6.1.4.1.171.10.76.39.1.5.3.1.1 no-access
                                               snmpV3GroupName 1.3.6.1.4.1.171.10.76.39.1.5.3.1.1.1 snmpadminstring read-only
The name of the group to which this entry (e.g., the combination of securityModel and securityName) belongs. This groupName is used as index into the vacmAccessTable to select an access control policy. However, a value in this table does not imply that an instance with the value exists in table vacmAccesTable.
                                               snmpV3GroupSecurityModel 1.3.6.1.4.1.171.10.76.39.1.5.3.1.1.2 integer read-only
In order to gain the access rights allowed by this conceptual row, this securityModel must be in use. Enumeration: 'v2c': 2, 'v1': 1, 'v3': 3.
                                               snmpV3GroupSecurityLevel 1.3.6.1.4.1.171.10.76.39.1.5.3.1.1.3 snmpsecuritylevel read-only
The minimum level of security required in order to gain the access rights allowed by this conceptual row. A securityLevel of noAuthNoPriv is less than authNoPriv which in turn is less than authPriv. If multiple entries are equally indexed except for this vacmAccessSecurityLevel index, then the entry which has the highest value for vacmAccessSecurityLevel is selected.
                                               snmpV3GroupReadViewName 1.3.6.1.4.1.171.10.76.39.1.5.3.1.1.4 snmpadminstring read-only
The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes read access. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of this object; if the value is the empty string or if there is no active MIB view having this value of vacmViewTreeFamilyViewName, then no access is granted.
                                               snmpV3GroupWriteViewName 1.3.6.1.4.1.171.10.76.39.1.5.3.1.1.5 snmpadminstring read-only
The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes write access. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of this object; if the value is the empty string or if there is no active MIB view having this value of vacmViewTreeFamilyViewName, then no access is granted.
                                               snmpV3GroupNotifyViewName 1.3.6.1.4.1.171.10.76.39.1.5.3.1.1.6 snmpadminstring read-only
The value of an instance of this object identifies the MIB view of the SNMP context to which this conceptual row authorizes access for notifications. The identified MIB view is that one for which the vacmViewTreeFamilyViewName has the same value as the instance of this object; if the value is the empty string or if there is no active MIB view having this value of vacmViewTreeFamilyViewName, then no access is granted.
                                               snmpV3GroupStatus 1.3.6.1.4.1.171.10.76.39.1.5.3.1.1.7 rowstatus read-only
The status of this conceptual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this conceptual row can be modified.
                                   snmpV3ViewTree 1.3.6.1.4.1.171.10.76.39.1.5.4
                                       snmpV3ViewTreeTable 1.3.6.1.4.1.171.10.76.39.1.5.4.1 no-access
                                           snmpV3ViewTreeEntry 1.3.6.1.4.1.171.10.76.39.1.5.4.1.1 no-access
                                               snmpV3viewTreeName 1.3.6.1.4.1.171.10.76.39.1.5.4.1.1.1 snmpadminstring read-only
The human readable name for a family of view subtrees.
                                               snmpV3viewTreeSubtree 1.3.6.1.4.1.171.10.76.39.1.5.4.1.1.2 object identifier read-only
The MIB subtree which when combined with the corresponding instance of vacmViewTreeFamilyMask defines a family of view subtrees.
                                               snmpV3viewTreeMask 1.3.6.1.4.1.171.10.76.39.1.5.4.1.1.3 octet string read-only
The bit mask which, in combination with the corresponding instance of vacmViewTreeFamilySubtree, defines a family of view subtrees. Each bit of this bit mask corresponds to a sub-identifier of vacmViewTreeFamilySubtree, with the most significant bit of the i-th octet of this octet string value (extended if necessary, see below) corresponding to the (8*i - 7)-th sub-identifier, and the least significant bit of the i-th octet of this octet string corresponding to the (8*i)-th sub-identifier, where i is in the range 1 through 16. Each bit of this bit mask specifies whether or not the corresponding sub-identifiers must match when determining if an OBJECT IDENTIFIER is in this family of view subtrees; a '1' indicates that an exact match must occur; a '0' indicates 'wild card', i.e., any sub-identifier value matches. Thus, the OBJECT IDENTIFIER X of an object instance is contained in a family of view subtrees if, for each sub-identifier of the value of vacmViewTreeFamilySubtree, either: the i-th bit of vacmViewTreeFamilyMask is 0, or the i-th sub-identifier of X is equal to the i-th sub-identifier of the value of vacmViewTreeFamilySubtree. If the value of this bit mask is M bits long and there are more than M sub-identifiers in the corresponding instance of vacmViewTreeFamilySubtree, then the bit mask is extended with 1's to be the required length. Note that when the value of this object is the zero-length string, this extension rule results in a mask of all-1's being used (i.e., no 'wild card'), and the family of view subtrees is the one view subtree uniquely identified by the corresponding instance of vacmViewTreeFamilySubtree. Note that masks of length greater than zero length do not need to be supported. In this case this object is made read-only.
                                               snmpV3viewTreeType 1.3.6.1.4.1.171.10.76.39.1.5.4.1.1.4 integer read-only
Indicates whether the corresponding instances of vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask define a family of view subtrees which is included in or excluded from the MIB view. Enumeration: 'included': 1, 'excluded': 2.
                                               snmpV3viewTreeStatus 1.3.6.1.4.1.171.10.76.39.1.5.4.1.1.5 rowstatus read-only
The status of this conceptual row. The RowStatus TC [RFC2579] requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified: The value of this object has no effect on whether other objects in this conceptual row can be modified.
                                   snmpV3Community 1.3.6.1.4.1.171.10.76.39.1.5.5
                                       snmpV3CommunityTable 1.3.6.1.4.1.171.10.76.39.1.5.5.1 no-access
                                           snmpV3CommunityEntry 1.3.6.1.4.1.171.10.76.39.1.5.5.1.1 no-access
                                               snmpV3CommunityName 1.3.6.1.4.1.171.10.76.39.1.5.5.1.1.1 octet string read-only
The unique index value of a row in this table.
                                               snmpV3CommunityPolicy 1.3.6.1.4.1.171.10.76.39.1.5.5.1.1.2 snmpadminstring read-only
A human readable string representing the corresponding value of snmpCommunityName in a Security Model independent format.
                                               snmpV3CommunityStatus 1.3.6.1.4.1.171.10.76.39.1.5.5.1.1.3 rowstatus read-only
The status of this conceptual row in the snmpCommunityTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The snmpCommunityName and snmpCommunitySecurityName objects must be explicitly set. There is no restriction on setting columns in this table when the value of snmpCommunityStatus is active(1).
                                   snmpV3Host 1.3.6.1.4.1.171.10.76.39.1.5.6
                                       ipv4snmpV3HostTable 1.3.6.1.4.1.171.10.76.39.1.5.6.1 no-access
                                           ipv4snmpV3HostEntry 1.3.6.1.4.1.171.10.76.39.1.5.6.1.1 no-access
                                               ipv4snmpV3HostAddress 1.3.6.1.4.1.171.10.76.39.1.5.6.1.1.1 ipaddress read-only
This object contains a transport address. The format of this address depends on the value of the snmpTargetAddrTDomain object. And this object is unique identifier associated with this snmpNotifyEntry.
                                               ipv4snmpV3HostCommunityName 1.3.6.1.4.1.171.10.76.39.1.5.6.1.1.2 snmpadminstring read-only
The locally arbitrary.
                                               ipv4snmpV3HostVersion 1.3.6.1.4.1.171.10.76.39.1.5.6.1.1.3 integer read-only
The Level of Security to be used when generating SNMP messages using this entry. Enumeration: 'v2c': 2, 'v1': 1, 'v3NoAuthNoPriv': 3, 'v3AuthNoPriv': 4, 'v3AuthPriv': 5.
                                               ipv4snmpV3HostStatus 1.3.6.1.4.1.171.10.76.39.1.5.6.1.1.4 rowstatus read-only
                                       snmpV3HostTable 1.3.6.1.4.1.171.10.76.39.1.5.6.2 no-access
                                           snmpV3HostEntry 1.3.6.1.4.1.171.10.76.39.1.5.6.2.1 no-access
                                               snmpV3HostAddress 1.3.6.1.4.1.171.10.76.39.1.5.6.2.1.1 ipv6address read-only
This object contains a transport address. The format of this address depends on the value of the snmpTargetAddrTDomain object. And this object is unique identifier associated with this snmpNotifyEntry.
                                               snmpV3IPType 1.3.6.1.4.1.171.10.76.39.1.5.6.2.1.2 integer read-only
Type of IP interface. Enumeration: 'iPv4': 1, 'iPv6': 2.
                                               snmpV3HostCommunityName 1.3.6.1.4.1.171.10.76.39.1.5.6.2.1.3 snmpadminstring read-only
The locally arbitrary.
                                               snmpV3HostVersion 1.3.6.1.4.1.171.10.76.39.1.5.6.2.1.4 integer read-only
The Level of Security to be used when generating SNMP messages using this entry. Enumeration: 'v2c': 2, 'v1': 1, 'v3NoAuthNoPriv': 3, 'v3AuthNoPriv': 4, 'v3AuthPriv': 5.
                                               snmpV3HostInterfaceName 1.3.6.1.4.1.171.10.76.39.1.5.6.2.1.5 octet string read-only
Specifies the interface name when the syslogSrvIP is linklocal address.
                                               snmpV3HostStatus 1.3.6.1.4.1.171.10.76.39.1.5.6.2.1.6 rowstatus read-only
                                   snmpV3EngineID 1.3.6.1.4.1.171.10.76.39.1.5.7 snmpengineid read-write
An SNMP engine's administratively-unique identifier. In a simple agent, this value is always that agent's own snmpEngineID value. The value can also take the value of the snmpEngineID of a remote SNMP engine with which this user can communicate.
                                   snmpV3Trap 1.3.6.1.4.1.171.10.76.39.1.5.8
                                       snmpV3TrapSNMPAuthentication 1.3.6.1.4.1.171.10.76.39.1.5.8.1 integer read-write
This object is for enabling or disabling SNMP login fail event trap in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                       snmpV3TrapColdStart 1.3.6.1.4.1.171.10.76.39.1.5.8.2 integer read-write
This object is for enabling or disabling devie Bootup event trap in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                       snmpV3TrapWarmStart 1.3.6.1.4.1.171.10.76.39.1.5.8.3 integer read-write
This object is for enabling or disabling devie Bootup event trap in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                       snmpV3TrapLinkUpDown 1.3.6.1.4.1.171.10.76.39.1.5.8.4 integer read-write
This object is for enabling or disabling Copper link up / link down event trap in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                       snmpV3TrapRSTPStateChange 1.3.6.1.4.1.171.10.76.39.1.5.8.5 integer read-write
This object is for enabling or disabling RSTP topology change event trap in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                       snmpV3TrapFirmUpgrade 1.3.6.1.4.1.171.10.76.39.1.5.8.6 integer read-write
This object is for enabling or disabling Firmware upgrade suess or fail event trap in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                       snmpV3TrapBPDUAttack 1.3.6.1.4.1.171.10.76.39.1.5.8.11 integer read-write
Used to configure trap settings for BPDU attack protection events. Enumeration: 'attackDetected': 2, 'both': 4, 'none': 1, 'attackCleared': 3.
                                       snmpV3TrapPortSecurity 1.3.6.1.4.1.171.10.76.39.1.5.8.12 integer read-write
Enumeration: 'disabled': 2, 'enabled': 1.
                                       snmpV3TrapIMPBViolation 1.3.6.1.4.1.171.10.76.39.1.5.8.13 integer read-write
Enumeration: 'disabled': 2, 'enabled': 1.
                                       snmpV3TrapLBD 1.3.6.1.4.1.171.10.76.39.1.5.8.14 integer read-write
Enumeration: 'disabled': 2, 'enabled': 1.
                                       snmpV3TrapDHCPServerScreening 1.3.6.1.4.1.171.10.76.39.1.5.8.15 integer read-write
Enumeration: 'disabled': 2, 'enabled': 1.
                                       snmpV3TrapDuplicateIPDetected 1.3.6.1.4.1.171.10.76.39.1.5.8.16 integer read-write
This object is for enabling or disabling send gratuitous trap when IP address conflicted in the network. Enumeration: 'disabled': 2, 'enabled': 1.
                                   snmpV3CommunityEncryption 1.3.6.1.4.1.171.10.76.39.1.5.9 integer read-write
This object is for enabling or disabling community encryption. Enumeration: 'disabled': 2, 'enabled': 1.
                               companySTP 1.3.6.1.4.1.171.10.76.39.1.6
                                   stpBridgeGlobal 1.3.6.1.4.1.171.10.76.39.1.6.1
                                       stpModuleStatus 1.3.6.1.4.1.171.10.76.39.1.6.1.1 integer read-write
The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, fsMIMstSystemControl set to start. Enumeration: 'disabled': 2, 'enabled': 1.
                                       stpProtocolVersion 1.3.6.1.4.1.171.10.76.39.1.6.1.2 integer read-write
The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w and 'mstp(3)' indicates the Multiple Spanning Tree Protocol Specified in IEEE 802.1s. Enumeration: 'mstp': 3, 'stp': 1, 'rstp': 2.
                                       stpBridgePriority 1.3.6.1.4.1.171.10.76.39.1.6.1.3 integer32 read-write
The Value of the writable portion of the Bridge Identifier comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
                                       stpTxHoldCount 1.3.6.1.4.1.171.10.76.39.1.6.1.4 integer32 read-write
The value used by the Port Transmit state machine to limit the maximum transmission rate.
                                       stpBridgeMaxAge 1.3.6.1.4.1.171.10.76.39.1.6.1.5 timeout read-write
The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
                                       stpBridgeHelloTime 1.3.6.1.4.1.171.10.76.39.1.6.1.6 timeout read-write
The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second.
                                       stpBridgeForwardDelay 1.3.6.1.4.1.171.10.76.39.1.6.1.7 timeout read-write
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of BridgeMaxAge. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
                                       stpFowardBPDU 1.3.6.1.4.1.171.10.76.39.1.6.1.8 integer read-write
This object is for enabling or disabling forward BPDU. Enumeration: 'disabled': 2, 'enabled': 1.
                                       stpRootBridge 1.3.6.1.4.1.171.10.76.39.1.6.1.9 bridgeid read-only
The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
                                       stpRootCost 1.3.6.1.4.1.171.10.76.39.1.6.1.10 integer32 read-only
The Cost of the path to the CIST Root as seen from this bridge.
                                       stpMaxAge 1.3.6.1.4.1.171.10.76.39.1.6.1.11 timeout read-only
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                                       stpForwardDelay 1.3.6.1.4.1.171.10.76.39.1.6.1.12 timeout read-only
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in a particular state before moving to the next state.
                                       stpRootPort 1.3.6.1.4.1.171.10.76.39.1.6.1.13 integer32 read-only
The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
                                       stpTopologyChangeTrapStatus 1.3.6.1.4.1.171.10.76.39.1.6.1.14 integer read-write
This object is for enabling or disabling topology change event trap in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                       stpNewRootTrapStatus 1.3.6.1.4.1.171.10.76.39.1.6.1.15 integer read-write
This object is for enabling or disabling new root event trap in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                       stpNewRootTraps 1.3.6.1.4.1.171.10.76.39.1.6.1.16
                                             brgAddress 1.3.6.1.4.1.171.10.76.39.1.6.1.16.1
The MAC address used by this bridge when it must be referred to in a unique fashion.
                                             oldDesignatedRoot 1.3.6.1.4.1.171.10.76.39.1.6.1.16.2
The bridge identifier of the old root of the spanning tree instance as determined by the Spanning Tree Protocol as executed by this node.
                                             mstiBridgeRegionalRoot 1.3.6.1.4.1.171.10.76.39.1.6.1.16.3
MSTI Regional Root Identifier value for the Instance.
                                   stpPortTable 1.3.6.1.4.1.171.10.76.39.1.6.2 no-access
A table that contains port-specific information for the Spanning Tree Protocol.
                                       stpPortEntry 1.3.6.1.4.1.171.10.76.39.1.6.2.1 no-access
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
                                           stpPort 1.3.6.1.4.1.171.10.76.39.1.6.2.1.1 integer read-only
The Port number of the port for which this entry contains spanning tree information.
                                           stpPortStatus 1.3.6.1.4.1.171.10.76.39.1.6.2.1.2 integer read-write
Current state of the Port which can be changed to either Disabled or Enabled for ALL spanning tree instances. Setting this object will override the port's status in any of the MSTI contexts Enumeration: 'disabled': 0, 'enabled': 1.
                                           stpPortPriority 1.3.6.1.4.1.171.10.76.39.1.6.2.1.3 integer read-write
The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting the CistPortPriority value. The values that are set for Port Priority must be in steps of 16.
                                           stpAdminPortPathCost 1.3.6.1.4.1.171.10.76.39.1.6.2.1.4 integer read-write
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. Writing a value of '0' assigns the automatically calculated default Path Cost value to the ohter object stpPortPathCost. If the default Path Cost is being used,this object returns '0' when read.
                                           stpPortPathCost 1.3.6.1.4.1.171.10.76.39.1.6.2.1.5 integer read-only
The contribution of this port to the path cost of paths towards the CIST Root which include this port.
                                           stpPortProtocolMigration 1.3.6.1.4.1.171.10.76.39.1.6.2.1.6 integer read-write
Indicates the Protocol migration state of this Port. When operating in RSTP/MSTP (version >= 2) mode, writing TRUE(1) to this object forces this port to transmit MSTP BPDUs without instance information. Any other operation on this object has no effect and it always returns FALSE(2) when read. Enumeration: 'true': 1, 'false': 0.
                                           stpPortEdge 1.3.6.1.4.1.171.10.76.39.1.6.2.1.7 integer read-write
This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled. Enumeration: 'false': 0, 'true': 1, 'auto': 2.
                                           stpPortAdminP2P 1.3.6.1.4.1.171.10.76.39.1.6.2.1.8 integer read-write
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this port should be treated as having a shared media connection. A value of auto(2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means. Enumeration: 'forceFalse': 1, 'forceTrue': 0, 'auto': 2.
                                           stpPortRestrictedRole 1.3.6.1.4.1.171.10.76.39.1.6.2.1.9 truthvalue read-write
A Boolean value set by management. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been selected. This parameter should be FALSE by default. If set it can cause lack of spanning tree connectivity. It is set by a network administrator to prevent bridges external to a core region of the network influencing the spanning tree active topology, possibly because those bridges are not under the full control of the administrator. This administrator configuration is also known as 'Root Guard'.
                                           stpPortRestrictedTCN 1.3.6.1.4.1.171.10.76.39.1.6.2.1.10 truthvalue read-write
A Boolean value set by management. If TRUE causes the Port not to propagate received topology change notifications and topology changes to other Ports. This parameter should be FALSE by default. If set it can cause temporary loss of connectivity after changes in a spanning trees active topology as a result of persistent incorrectly learnt station location information. It is set by a network administrator to prevent bridges external to a core region of the network causing address flushing in that region, possibly because those bridges are not under the full control of the administrator or MAC_Operational for the attached LANs transitions frequently.
                                           stpPortHelloTime 1.3.6.1.4.1.171.10.76.39.1.6.2.1.11 timeout read-write
The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second.
                                           stpPortState 1.3.6.1.4.1.171.10.76.39.1.6.2.1.12 integer read-only
Current state of the Port as defined by the Common spanning tree protocol. Enumeration: 'disabled': 1, 'discarding': 2, 'forwarding': 5, 'learning': 4.
                                           stpPortFowardBPDU 1.3.6.1.4.1.171.10.76.39.1.6.2.1.13 integer read-write
This object is for enabling or disabling forward BPDU. Enumeration: 'disabled': 2, 'enabled': 1.
                                   mstConfigurationIdentification 1.3.6.1.4.1.171.10.76.39.1.6.3
                                       mstiConfigurationName 1.3.6.1.4.1.171.10.76.39.1.6.3.1 octet string read-write
The Name for the Region's configuration. By Default Region Name will be equal to the Bridge Mac Address.
                                       mstiRevisionLevel 1.3.6.1.4.1.171.10.76.39.1.6.3.2 integer32 read-write
Version of the MST Region.
                                       mstCistVlanMapped 1.3.6.1.4.1.171.10.76.39.1.6.3.3 octet string read-only
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'.
                                       mstCistVlanMapped2k 1.3.6.1.4.1.171.10.76.39.1.6.3.4 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
                                       mstCistVlanMapped3k 1.3.6.1.4.1.171.10.76.39.1.6.3.5 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
                                       mstCistVlanMapped4k 1.3.6.1.4.1.171.10.76.39.1.6.3.6 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
                                       mstVlanMstiMappingTable 1.3.6.1.4.1.171.10.76.39.1.6.3.7 no-access
This table contains one entry for each instance of MSTP. This table maintains context ID as one more index to support Multiple Instances.
                                           mstVlanMstiMappingEntry 1.3.6.1.4.1.171.10.76.39.1.6.3.7.1 no-access
A conceptual row containing the status of the MSTP instance.
                                               mstInstanceIndex 1.3.6.1.4.1.171.10.76.39.1.6.3.7.1.1 integer32 read-only
An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance.
                                               mstSetVlanList 1.3.6.1.4.1.171.10.76.39.1.6.3.7.1.2 octet string read-write
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to map for this Instance. If the VlanId to Instance Mapping has to be known then any one of the VlanMapped object should be used.If a vlan is already mapped to this Instance, it may not be mapped again. This object is used only for SET operation. GET Operation returns null values.
                                               mstResetVlanList 1.3.6.1.4.1.171.10.76.39.1.6.3.7.1.3 octet string read-write
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to unmap from this Instance. A vlan may not be unmapped from this instance if it is not already mapped to this Instance. This object is used only for SET operation.GET Operation returns null values.
                                               mstInstanceVlanMapped 1.3.6.1.4.1.171.10.76.39.1.6.3.7.1.4 octet string read-only
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'.
                                               mstInstanceVlanMapped2k 1.3.6.1.4.1.171.10.76.39.1.6.3.7.1.5 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
                                               mstInstanceVlanMapped3k 1.3.6.1.4.1.171.10.76.39.1.6.3.7.1.6 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
                                               mstInstanceVlanMapped4k 1.3.6.1.4.1.171.10.76.39.1.6.3.7.1.7 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4095.
                                   stpInstance 1.3.6.1.4.1.171.10.76.39.1.6.4
                                       mstCistBridgePriority 1.3.6.1.4.1.171.10.76.39.1.6.4.1 integer32 read-write
The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
                                       mstCistStatus 1.3.6.1.4.1.171.10.76.39.1.6.4.2 integer read-only
The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, fsMIMstSystemControl set to start. Enumeration: 'disabled': 2, 'enabled': 1.
                                       mstMstiBridgeTable 1.3.6.1.4.1.171.10.76.39.1.6.4.3 no-access
Table containing Bridge Information specific to Spanning Tree Instance. This table maintains context ID as one more index to support Multiple Instances.
                                           mstMstiBridgeEntry 1.3.6.1.4.1.171.10.76.39.1.6.4.3.1 no-access
Entry indicating the Bridge Information.
                                               mstMstiInstanceIndex 1.3.6.1.4.1.171.10.76.39.1.6.4.3.1.1 integer32 read-only
Spanning Tree Instance to which the information belongs.
                                               mstMstiBridgePriority 1.3.6.1.4.1.171.10.76.39.1.6.4.3.1.2 integer32 read-write
The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
                                               mstMstiStatus 1.3.6.1.4.1.171.10.76.39.1.6.4.3.1.3 integer read-only
The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object can be set to enabled(1) if and only if, fsMIMstSystemControl set to start. Enumeration: 'disabled': 2, 'enabled': 1.
                                   stpInstancePortTable 1.3.6.1.4.1.171.10.76.39.1.6.5
                                       mstCistPortTable 1.3.6.1.4.1.171.10.76.39.1.6.5.1 no-access
This table contains Common Spanning Tree Port Information.
                                           mstCistPortEntry 1.3.6.1.4.1.171.10.76.39.1.6.5.1.1 no-access
A list of information maintained by every port for Common Spanning tree.
                                               mstCistPort 1.3.6.1.4.1.171.10.76.39.1.6.5.1.1.1 integer32 no-access
The Port number of the port for which this entry contains spanning tree information.
                                               mstCistPortDesignatedBridge 1.3.6.1.4.1.171.10.76.39.1.6.5.1.1.2 bridgeid read-only
The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
                                               mstCistPortAdminPathCost 1.3.6.1.4.1.171.10.76.39.1.6.5.1.1.3 integer32 read-write
The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
                                               mstCistPortPathCost 1.3.6.1.4.1.171.10.76.39.1.6.5.1.1.4 integer32 read-write
The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
                                               mstCistPortPriority 1.3.6.1.4.1.171.10.76.39.1.6.5.1.1.5 integer32 read-write
The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supported by the Bridge. The values that are set for Port Priority must be in steps of 16.
                                               mstCistForcePortState 1.3.6.1.4.1.171.10.76.39.1.6.5.1.1.6 integer read-only
Current state of the Port which can be changed to either Disabled or Enabled for the specific spanning tree instance. This object can be set to enabled only if the 'fsMIMstCistForcePortState' is set to 'enabled' for this port Enumeration: 'disabled': 0, 'enabled': 1.
                                               mstCistCurrentPortRole 1.3.6.1.4.1.171.10.76.39.1.6.5.1.1.7 integer read-only
Current Port Role of the port for this spanning tree instance. Enumeration: 'backup': 2, 'alternate': 1, 'designated': 4, 'disabled': 0, 'master': 5, 'root': 3.
                                       mstMstiPortTable 1.3.6.1.4.1.171.10.76.39.1.6.5.2 no-access
This table contains Spanning Tree Instance Specific Port Information.
                                           mstMstiPortEntry 1.3.6.1.4.1.171.10.76.39.1.6.5.2.1 no-access
A list of information maintained by every port for each and every spanning tree instance.
                                               mstMstiPort 1.3.6.1.4.1.171.10.76.39.1.6.5.2.1.1 integer32 no-access
The Port number of the port for which this entry contains spanning tree information.
                                               mstMstiPortDesignatedBridge 1.3.6.1.4.1.171.10.76.39.1.6.5.2.1.2 bridgeid read-only
The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
                                               mstMstiPortAdminPathCost 1.3.6.1.4.1.171.10.76.39.1.6.5.2.1.3 integer32 read-write
The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
                                               mstMstiPortPathCost 1.3.6.1.4.1.171.10.76.39.1.6.5.2.1.4 integer32 read-write
The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
                                               mstMstiPortPriority 1.3.6.1.4.1.171.10.76.39.1.6.5.2.1.5 integer32 read-write
The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supported by the Bridge. The values that are set for Port Priority must be in steps of 16.
                                               mstMstiForcePortState 1.3.6.1.4.1.171.10.76.39.1.6.5.2.1.6 integer read-only
Current state of the Port which can be changed to either Disabled or Enabled for the specific spanning tree instance. This object can be set to enabled only if the 'fsMIMstCistForcePortState' is set to 'enabled' for this port Enumeration: 'disabled': 0, 'enabled': 1.
                                               mstMstiCurrentPortRole 1.3.6.1.4.1.171.10.76.39.1.6.5.2.1.7 integer read-only
Current Port Role of the port for this spanning tree instance. Enumeration: 'backup': 2, 'alternate': 1, 'designated': 4, 'disabled': 0, 'master': 5, 'root': 3.
                               companyDot1qVlanGroup 1.3.6.1.4.1.171.10.76.39.1.7
                                   dot1qVlanManagementOnOff 1.3.6.1.4.1.171.10.76.39.1.7.2 integer read-write
Enable/Disable management VLAN mechanism. Enumeration: 'disabled': 2, 'enabled': 1.
                                   dot1qVlanManagementid 1.3.6.1.4.1.171.10.76.39.1.7.3 integer read-write
The management VLAN ID, which will allow to forward packets of that VLAN to CPU.
                                   dot1qVlanAsyOnOff 1.3.6.1.4.1.171.10.76.39.1.7.5 integer read-write
Enable/Disable IEEE 802.1Q Asymmetric VLAN Enumeration: 'disabled': 2, 'enabled': 1.
                                   dot1qVlanTable 1.3.6.1.4.1.171.10.76.39.1.7.6 no-access
A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
                                       dot1qVlanEntry 1.3.6.1.4.1.171.10.76.39.1.7.6.1 no-access
Information for a VLAN configured into the device by (local or network) management.
                                           dot1qVlanName 1.3.6.1.4.1.171.10.76.39.1.7.6.1.1 snmpadminstring read-only
An administratively assigned string, which may be used to identify the VLAN.
                                           dot1qVlanEgressPorts 1.3.6.1.4.1.171.10.76.39.1.7.6.1.2 portlist read-only
The set of ports which are permanently assigned to the egress list for this VLAN by management. Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanForbiddenEgressPorts. The default value of this object is a string of zeros of appropriate length, indicating not fixed.
                                           dot1qVlanForbiddenPorts 1.3.6.1.4.1.171.10.76.39.1.7.6.1.3 portlist read-write
The set of ports which are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar control for Registration Forbidden for the relevant GVRP state machine on each port. A port may not be added in this set if it is already a member of the set of ports in dot1qVlanEgressPorts. The default value of this object is a string of zeros of appropriate length, excluding all ports from the forbidden set.
                                           dot1qVlanUntaggedPorts 1.3.6.1.4.1.171.10.76.39.1.7.6.1.4 portlist read-only
The set of ports which should transmit egress packets for this VLAN as untagged. The default value of this object for the default VLAN (dot1qVlanIndex = 1) is a string of appropriate length including all ports. There is no specified default for other VLANs. If a device agent cannot support the set of ports being set then it will reject the set operation with an error. An example might be if a manager attempts to set more than one VLAN to be untagged on egress where the device does not support this IEEE 802.1Q option.
                                           dot1qVlanAdvertisementStatus 1.3.6.1.4.1.171.10.76.39.1.7.6.1.5 integer read-only
Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                                           dot1qVlanRowStatus 1.3.6.1.4.1.171.10.76.39.1.7.6.1.6 rowstatus read-only
The status of a row in dot1qVlanTable. By setting this object, new entries can be created in dot1qVlanTable and existing entries can be removed from dot1qVlanTable. It can be used as specified in the SNMP v2 standard.
                                   dot1qVlanPortTable 1.3.6.1.4.1.171.10.76.39.1.7.7 no-access
A table containing per port control and status information for VLAN configuration in the device.
                                       dot1qVlanPortEntry 1.3.6.1.4.1.171.10.76.39.1.7.7.1 no-access
Information controlling VLAN configuration for a port on the device.
                                           dot1qVlanPvid 1.3.6.1.4.1.171.10.76.39.1.7.7.1.1 vlanindex read-write
The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.
                                   dot1qVlanUngisterMCFilterTable 1.3.6.1.4.1.171.10.76.39.1.7.8 no-access
This table contains the list of ports through which a router, in a particular VLAN is reachable.
                                       dot1qVlanUngisterMCFilterEntry 1.3.6.1.4.1.171.10.76.39.1.7.8.1 no-access
A list of multicast filter mode information for each VLAN ID.
                                           dot1qVlanUngisterMCFilterVlanId 1.3.6.1.4.1.171.10.76.39.1.7.8.1.1 integer32 read-only
Per Vlan to configure multicast filtering function.
                                           dot1qVlanUngisterMCFiltermode 1.3.6.1.4.1.171.10.76.39.1.7.8.1.2 integer read-write
Filter unknown multicast frames or normal operation(i.e. forwarding) Enumeration: 'filter': 1, 'forward': 0, 'forwardall': 2.
                                   dot1qVlanPVIDAutoAssignOnOff 1.3.6.1.4.1.171.10.76.39.1.7.9 integer read-write
Enable/Disable VLAN PVID auto assignment Enumeration: 'disabled': 2, 'enabled': 1.
                               companyLA 1.3.6.1.4.1.171.10.76.39.1.8
                                   laSystem 1.3.6.1.4.1.171.10.76.39.1.8.1
                                       laStatus 1.3.6.1.4.1.171.10.76.39.1.8.1.2 integer read-write
Sets the Link Aggregation Module administrative status as enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                       laPortChannelTable 1.3.6.1.4.1.171.10.76.39.1.8.1.3 no-access
A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. This Port-channel table is indexed through Key values and allows to configure link selection policy and the Mac address for the port-channel. All other objects in this table displays the details of the port-channel.
                                           laPortChannelEntry 1.3.6.1.4.1.171.10.76.39.1.8.1.3.1 no-access
There is one entry in this table for each created port-channel port.
                                               laPortChannelIfIndex 1.3.6.1.4.1.171.10.76.39.1.8.1.3.1.1 interfaceindex read-only
The index of the port-channel(Aggregator's interface index).
                                               laPortChannelMemberList 1.3.6.1.4.1.171.10.76.39.1.8.1.3.1.2 portlist read-write
Member Port list of the port channel. Add the ports as a aggregation member associated of a port-channel.
                                               laPortChannelMode 1.3.6.1.4.1.171.10.76.39.1.8.1.3.1.3 portlamode read-write
Current Operating Channel Mode of the port channel Lacp(1) - forcing the port to negotiate with the partner. manual(2) - force the port to enable channeling (Manual). disable(3) - channeling is disabled.
                                               laPortChannelMasterPort 1.3.6.1.4.1.171.10.76.39.1.8.1.3.1.4 interfaceindex read-write
The master port of the port-channel.
                                       laAlgorithm 1.3.6.1.4.1.171.10.76.39.1.8.1.4 integer read-write
Sets the Link Aggregation load balance algorithm. Enumeration: 'sourceMAC': 1, 'destMAC': 2, 'sourceAndDestMAC': 3, 'destIP': 5, 'sourceIP': 4, 'sourceAndDestIP': 6.
                                   laPortControl 1.3.6.1.4.1.171.10.76.39.1.8.2
                                       laPortControlTable 1.3.6.1.4.1.171.10.76.39.1.8.2.1 no-access
A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port.
                                           laPortControlEntry 1.3.6.1.4.1.171.10.76.39.1.8.2.1.1 no-access
A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device.
                                               laPortControlIndex 1.3.6.1.4.1.171.10.76.39.1.8.2.1.1.1 interfaceindex read-only
The index of the port.
                                               laPortActorPortPriority 1.3.6.1.4.1.171.10.76.39.1.8.2.1.1.2 integer read-write
The priority value assigned to this Aggregation Port. This 16-bit value is read-write.
                                               laPortActorActivity 1.3.6.1.4.1.171.10.76.39.1.8.2.1.1.3 integer read-write
This object indicates LACP_Activity to this Aggregation Port. LACP can be configured in one of two modes: active or passive. In active mode it will always send frames along the configured links. If the actor and partner are both in passive mode, they do not exchange LACP packets. Enumeration: 'active': 1, 'passive': 2.
                                               laPortActorTimeout 1.3.6.1.4.1.171.10.76.39.1.8.2.1.1.4 integer read-write
This object indicates LACP_Timeout to this Aggregation Port. short(1) - LACP Timeout 3 seconds. long (2) - LACP Timeout 90 seconds. Enumeration: 'short': 1, 'long': 2.
                               companyStaticMAC 1.3.6.1.4.1.171.10.76.39.1.9
                                   staticDisableAutoLearn 1.3.6.1.4.1.171.10.76.39.1.9.1 integer read-write
Set on to disable Auto Learning Excluding Uplink Port and set off to enable Auto Learning. Enumeration: 'on': 1, 'off': 2.
                                   staticAutoLearningList 1.3.6.1.4.1.171.10.76.39.1.9.2 portlist read-write
The set of the device's member ports that belong to the Static MAC auto learning enable/disable. For example, when Disable Auto Learning is enable, the octet value set up as '# 0x0F 0xFF 0xFF 0xFF' means from port 1 to port 4 are not in auto learning state, the other ports are in auto learning state. It can be set up when Disable Auto Learning is enable.
                                   staticTable 1.3.6.1.4.1.171.10.76.39.1.9.3 no-access
A list of the Static MACs
                                       staticEntry 1.3.6.1.4.1.171.10.76.39.1.9.3.1 no-access
A Static MAC entry containing the mac and forwarding port.
                                           staticVlanID 1.3.6.1.4.1.171.10.76.39.1.9.3.1.1 integer read-only
The VLAN ID of the static MAC entry.
                                           staticMac 1.3.6.1.4.1.171.10.76.39.1.9.3.1.2 macaddress read-only
The MAC address associated of the static MAC entry.
                                           staticPort 1.3.6.1.4.1.171.10.76.39.1.9.3.1.3 integer read-only
The forwarding port of the static MAC entry. For all machines give maximum port number.
                                           staticStatus 1.3.6.1.4.1.171.10.76.39.1.9.3.1.4 rowstatus read-write
The status of an entry in the Static MAC Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. The trunk member port can not set up static MAC.
                                   autoFdbTable 1.3.6.1.4.1.171.10.76.39.1.9.4 no-access
A list of the Auto Fdb
                                       autoFdbEntry 1.3.6.1.4.1.171.10.76.39.1.9.4.1 no-access
A auto fdb entry containing the ipaddress
                                           autoFdbIPAddress 1.3.6.1.4.1.171.10.76.39.1.9.4.1.1 ipaddress read-only
The IpAddress of the autoFdbEntry.
                                           autoFdbVlanID 1.3.6.1.4.1.171.10.76.39.1.9.4.1.2 integer32 read-only
The VlanID of the autoFdbEntry.
                                           autoFdbMacAddress 1.3.6.1.4.1.171.10.76.39.1.9.4.1.3 macaddress read-only
The Mac Address of the autoFdbEntry.
                                           autoFdbPort 1.3.6.1.4.1.171.10.76.39.1.9.4.1.4 integer read-only
The Port of the autoFdbEntry.
                                           autoFdbTimeStamp 1.3.6.1.4.1.171.10.76.39.1.9.4.1.5 integer32 read-only
The Time Stamp of the autoFdbEntry.
                                           autoFdbStatus 1.3.6.1.4.1.171.10.76.39.1.9.4.1.6 rowstatus read-write
The status of an entry in the Auto Fdb Table. Only a subset of the rowstatus variables (createAndGo, createAndWait,destroy) are available.
                                   staticVlanBaseTable 1.3.6.1.4.1.171.10.76.39.1.9.5
                                       staticVlanBaseAutoLearnList1k 1.3.6.1.4.1.171.10.76.39.1.9.5.1 octet string read-write
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this Auto Learn, the bit corresponding to that VLAN is set to '1'. Write AutoLearnList1k use 256 character, and conform to the foregoing rules.
                                       staticVlanBaseAutoLearnList2k 1.3.6.1.4.1.171.10.76.39.1.9.5.2 octet string read-write
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1025 through 2048. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this Auto Learn. Write AutoLearnList2k use 256 character, and conform to the foregoing rules.
                                       staticVlanBaseAutoLearnList3k 1.3.6.1.4.1.171.10.76.39.1.9.5.3 octet string read-write
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2049 through 3072. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this Auto Learn the bit corresponding to that VLAN is set to '1'. Write AutoLearnList3k use 256 character, and conform to the foregoing rules.
                                       staticVlanBaseAutoLearnList4k 1.3.6.1.4.1.171.10.76.39.1.9.5.4 octet string read-write
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3073 through 4094. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this Auto Learn the bit corresponding to that VLAN is set to '1'. Write AutoLearnList4k use 256 character, and conform to the foregoing rules.
                                       staticVlanBaseEnableAutoLearn 1.3.6.1.4.1.171.10.76.39.1.9.5.5 octet string read-write
Set enable vlan list to auto learn, and range 1-4094.
                                       staticVlanBaseDisableAutoLearn 1.3.6.1.4.1.171.10.76.39.1.9.5.6 octet string read-write
Set disable vlan list to auto learn, and range 1-4094.
                               companyIgsGroup 1.3.6.1.4.1.171.10.76.39.1.10
                                     igsSystem 1.3.6.1.4.1.171.10.76.39.1.10.1
                                         igsStatus 1.3.6.1.4.1.171.10.76.39.1.10.1.1 integer read-write
Enables or disables IGMP snooping in the system. When set to 'enabled', the IGS module starts protocol operations. When set to 'disabled', the IGS module stops performing protocol operations. Enumeration: 'disabled': 2, 'enabled': 1.
                                         igsRouterPortPurgeInterval 1.3.6.1.4.1.171.10.76.39.1.10.1.2 integer32 read-write
This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, this timer runs for 'RouterPortPurgeInterval' seconds.When the timer expires, the learnt router port entry is purged. However if control messages are received from the router before the timer expiry, then the timer is restarted.
                                         igsHostPortPurgeInterval 1.3.6.1.4.1.171.10.76.39.1.10.1.3 integer32 read-write
This is the interval (in seconds) after which a learnt port entry will be purged. For each port on which report has been received this timer runs for 'PortPurgeInterval' seconds. This timer will be restarted whenever a report message is received from a host on the specific port. If the timer expires, then , the learnt port entry will be purged from the multicast group.
                                         igsDataDrivenLearningMaxLearnedEntryVlaue 1.3.6.1.4.1.171.10.76.39.1.10.1.8 integer read-write
The maximum data driven learning entry value.
                                         igsReportToAllPort 1.3.6.1.4.1.171.10.76.39.1.10.1.9 integer read-write
Enables or disables IGMP snooping in the system. When set to 'enabled', the IGS module forwards packets to report to all port. When set to 'disabled', the IGS module forwards packets to router port only. Enumeration: 'disabled': 2, 'enabled': 1.
                                     igsVlan 1.3.6.1.4.1.171.10.76.39.1.10.3
                                         igsVlanRouterTable 1.3.6.1.4.1.171.10.76.39.1.10.3.3 no-access
This table contains the list of ports through which a router, in a particular VLAN is reachable.
                                             igsVlanRouterEntry 1.3.6.1.4.1.171.10.76.39.1.10.3.3.1 no-access
Contains the VLAN ID and list of ports on which routers are present in the VLAN.
                                                 igsVlanRouterVlanId 1.3.6.1.4.1.171.10.76.39.1.10.3.3.1.1 integer32 read-only
VLAN ID of the ports through which router is reachable.
                                                 igsVlanRouterPortList 1.3.6.1.4.1.171.10.76.39.1.10.3.3.1.2 portlist read-only
List of ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.
                                         igsVlanFilterTable 1.3.6.1.4.1.171.10.76.39.1.10.3.4 no-access
This table contains configuration of snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system.
                                             igsVlanFilterEntry 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1 no-access
Contains snooping status , version and fast leave configuration for a specific VLAN.
                                                 igsVlanFilterVlanId 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.1 integer32 read-only
Index of IgsVlanFilterEntry. This object indicates the VLAN ID for which the snooping configurations in IgsVlanFilterEntry is to be done.
                                                 igsVlanSnoopStatus 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.2 integer read-write
This object allows you to enable/disable IGS function on a specific VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 igsVlanQuerier 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.3 integer read-only
Indicates whether the switch is configured as a querier in the VLAN Enumeration: 'disabled': 2, 'enabled': 1.
                                                 igsVlanCfgQuerier 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.4 integer read-write
The snooping switch can be configured as a querier via this object to send out IGMP general queries when IGMP routers are not present in the VLAN. When set to 'enabled', the switch will generate general queries. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 igsVlanQueryInterval 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.5 integer32 read-write
This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. A switch should be configured as a querier for a VLAN only when there is no queriers in the network.
                                                 igsVlanRtrPortList 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.6 portlist read-write
List of ports which are configured statically as router ports
                                                 igsVlanFbdRtrPortList 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.7 portlist read-write
List of ports which can be configured statically as forbidden router ports.
                                                 igsVlanFastLeave 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.8 integer read-write
Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message, the switch checks if they are any interested receivers for the group by sending a group specific query before removing the port from the forwarding table. If set to 'enabled', the switch does not send a group specific query and immediately removes the port from the forwarding table. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 igsVlanDataDrivenLearningStatus 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.9 integer read-write
This object allows you to enable/disable Data Driven Learning function on a specific VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 igsVlanQuerierVersionStatus 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.10 integer read-write
This object allows you to enable/disable Querier Version function on a specific VLAN. Enumeration: 'igmp-v1': 1, 'igmp-v3': 3, 'igmp-v2': 2.
                                                 igsVlanDataDrivenLearningAgeOutStatus 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.11 integer read-write
This object allows you to enable/disable Data Driven Learning Age Out State on a specific VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 igsVlanReportSuppression 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.12 integer read-write
Enables or disables Report suppression in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 igsVlanRobustnessValue 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.13 integer32 read-write
When the switch receives leave message on a port, it sends group specific query to check if there are any other interested receivers for the group. This attribute defines the maximum number of queries sent by the switch before deleting the port from the group membership information in the forwarding database. If the maximum retry count exceeds 'igsRobustnessValue', then the port will be deleted from the multicast group membership information in the forwarding database and received leave message will be forwarded onto the router ports if there are no interested receivers for the group.
                                                 igsVlanGrpQueryInterval 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.14 integer32 read-write
The value of this attribute defines the time period with which the switch will send group specific queries on a port to check if there is any intersted receivers. The switch will send 'igsRobustnessValue' queries before removing the port from the group membership information in the forwarding database.
                                                 igsVlanQueryMaxResponseTime 1.3.6.1.4.1.171.10.76.39.1.10.3.4.1.15 integer read-write
The maximum query response time advertised in IGMPv2 general queries on this interface.
                                         igsVlanMulticastGroupTable 1.3.6.1.4.1.171.10.76.39.1.10.3.5 no-access
This table contains MAC based multicast forwarding information.
                                             igsVlanMulticastGroupEntry 1.3.6.1.4.1.171.10.76.39.1.10.3.5.1 no-access
This table contains VLAN ID, multicast group MAC address and the list of ports onto which the multicast data packets for group should be forwarded.
                                                 igsVlanMulticastGroupVlanId 1.3.6.1.4.1.171.10.76.39.1.10.3.5.1.1 integer32 read-only
VLAN ID pertaining to the Multicast forwarding entry
                                                 igsVlanMulticastGroupIpAddress 1.3.6.1.4.1.171.10.76.39.1.10.3.5.1.2 inetaddress read-only
Multicast group IP address. This object indicates that a multicast group address was learned in the switch and be represented as IP address format.
                                                 igsVlanMulticastGroupMacAddress 1.3.6.1.4.1.171.10.76.39.1.10.3.5.1.3 macaddress read-only
Multicast group MAC address. This object indicates that a multicast group address was learned in the switch and be represented as MAC address format.
                                                 igsVlanMulticastGroupPortList 1.3.6.1.4.1.171.10.76.39.1.10.3.5.1.4 portlist read-only
List of ports onto which the multicast data packets destined for this group will be forwarded.
                                     igsAccessAuth 1.3.6.1.4.1.171.10.76.39.1.10.5
                                         igsAccessAuthTable 1.3.6.1.4.1.171.10.76.39.1.10.5.1 no-access
This table is used to manage the IGMP Authentication function of the switch.
                                             igsAccessAuthEntry 1.3.6.1.4.1.171.10.76.39.1.10.5.1.1 no-access
Contains management entities for IGMP Authentication function.
                                                 igsAccessAuthPortIndex 1.3.6.1.4.1.171.10.76.39.1.10.5.1.1.1 integer32 read-only
The port index of igsAccessAuthTable which indicates the port to be configured.
                                                 igsAccessAuthState 1.3.6.1.4.1.171.10.76.39.1.10.5.1.1.2 integer read-write
This object can be configured to set IGMP Authentication state to enabled/disabled on each port. Enumeration: 'disabled': 2, 'enabled': 1.
                                     igsHost 1.3.6.1.4.1.171.10.76.39.1.10.6
                                         igsHostTable 1.3.6.1.4.1.171.10.76.39.1.10.6.1 no-access
This table is used to manage the IGMP Host based Fast Leave function of the switch.
                                             igsHostEntry 1.3.6.1.4.1.171.10.76.39.1.10.6.1.1 no-access
Contains management entities for IGMP Host based fast leave function.
                                                 igsHostTableVLANID 1.3.6.1.4.1.171.10.76.39.1.10.6.1.1.1 integer32 read-only
VLAN ID of Host table entry.
                                                 igsHostTableGroupAddress 1.3.6.1.4.1.171.10.76.39.1.10.6.1.1.2 inetaddress read-only
Group address of Host table entry.
                                                 igsHostTablePort 1.3.6.1.4.1.171.10.76.39.1.10.6.1.1.3 integer32 read-only
Port number of Host table entry. For all machines give maximum port number.
                                                 igsHostTableHostIPAddress 1.3.6.1.4.1.171.10.76.39.1.10.6.1.1.4 inetaddress read-only
Host IP address of Group in Host table entry.
                               companyGVRPGroup 1.3.6.1.4.1.171.10.76.39.1.11
                                     gvrpGVRPGlobalSettingsOnOff 1.3.6.1.4.1.171.10.76.39.1.11.1 integer read-write
Enable/Disable GVRP mechanism. Enumeration: 'disabled': 2, 'enabled': 1.
                                     gvrpSettingsJoinTime 1.3.6.1.4.1.171.10.76.39.1.11.2 integer read-write
The Join Time value assigned to this Join Time field. This 16-bit value is read-write.
                                     gvrpSettingsLeaveTime 1.3.6.1.4.1.171.10.76.39.1.11.3 integer read-write
The Leave Time value assigned to this Leave Time field. This 16-bit value is read-write.
                                     gvrpSettingsLeaveAllTime 1.3.6.1.4.1.171.10.76.39.1.11.4 integer read-write
The Leave_All Time value assigned to this Leave_All Time field. This 16-bit value is read-write.
                                     gvrpSettingsTable 1.3.6.1.4.1.171.10.76.39.1.11.5 no-access
A table containing static configuration information for each GVRP configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
                                         gvrpSettingsEntry 1.3.6.1.4.1.171.10.76.39.1.11.5.1 no-access
Information for a GVRP configured into the device by (local or network) management.
                                             gvrpSettingsPortControlIndex 1.3.6.1.4.1.171.10.76.39.1.11.5.1.1 interfaceindex read-only
The index of the port.
                                             gvrpSettingsPVID 1.3.6.1.4.1.171.10.76.39.1.11.5.1.2 integer read-write
The PVID value assigned to this Aggregation Port. This 16-bit value is read-write.
                                             gvrpSettingsGVRPState 1.3.6.1.4.1.171.10.76.39.1.11.5.1.3 integer read-write
Enable/Disable GVRP State to this Aggregation Port. Enumeration: 'disabled': 2, 'enabled': 1.
                                             gvrpSettingsIngressChecking 1.3.6.1.4.1.171.10.76.39.1.11.5.1.4 integer read-write
Enable/Disable Ingress Checking mechanism of GVRP to this Aggregation Port. Enumeration: 'disabled': 2, 'enabled': 1.
                                             gvrpSettingsAcceptableFrameType 1.3.6.1.4.1.171.10.76.39.1.11.5.1.5 integer read-write
Chose types All Frames/Tagged to this Aggregation Port. Enumeration: 'taggedOnly': 2, 'allFrames': 1.
                               companyQoSGroup 1.3.6.1.4.1.171.10.76.39.1.12
                                     cosScheduleMechanism 1.3.6.1.4.1.171.10.76.39.1.12.1 integer read-write
Queuing mechanism. strictPriority(1) : Strict Priority wrr(2) : Weighted Round Robin Strict-priority scheduling is implemented with a special strict-priority scheduler node that is stacked directly above the port. Queues stacked on top of the strict-priority scheduler node always get bandwidth before other queues. Weighted round-robin scheduling is designed to better handle queues with different processing capacities. Each queue has a weight : Low is 1, Medium is 2, High is 4 and Highest is 8 for WS3 spec. Queues with higher weights get bandwidth before than other queues with less weights. Enumeration: 'wrr': 2, 'strictPriority': 1.
                                     cosOutputSchedule 1.3.6.1.4.1.171.10.76.39.1.12.2
                                         cosClassTable 1.3.6.1.4.1.171.10.76.39.1.12.2.1 no-access
A list of cosOutputSchedule.
                                             cosClassEntry 1.3.6.1.4.1.171.10.76.39.1.12.2.1.1 no-access
A list of cosOutputClass Weight.
                                                 cosClassIndex 1.3.6.1.4.1.171.10.76.39.1.12.2.1.1.1 integer read-only
A index of class 0 ~ 7.
                                                 cosWeight 1.3.6.1.4.1.171.10.76.39.1.12.2.1.1.2 integer read-write
cos weight
                                     qosDefaultUserPri 1.3.6.1.4.1.171.10.76.39.1.12.4
                                         qosDefaultUserPriTable 1.3.6.1.4.1.171.10.76.39.1.12.4.1 no-access
A list of 802.1p port default priority Entries.
                                             qosDefaultUserPriEntry 1.3.6.1.4.1.171.10.76.39.1.12.4.1.1 no-access
A list of 802.1p port default priority priorities.
                                                 qosDefaultUserPriPortIndex 1.3.6.1.4.1.171.10.76.39.1.12.4.1.1.1 integer read-only
A port identifier that is in the range of 1 to ifNumber.
                                                 qosDefaultPriority 1.3.6.1.4.1.171.10.76.39.1.12.4.1.1.2 integer read-write
For ingress untagged packets, the per port 'Default Priority' setting will be applied to packets of each port to provide port-based traffic prioritization when 802.1p is enabled. Enumeration: 'priority1': 1, 'priority0': 0, 'priority3': 3, 'priority2': 2, 'priority5': 5, 'priority4': 4, 'priority7': 7, 'priority6': 6.
                                                 qosEffectiveDefaultPriority 1.3.6.1.4.1.171.10.76.39.1.12.4.1.1.3 integer read-only
For ingress untagged packets, the per port 'Effective Default Priority' setting will be applied to packets of each port to provide port-based traffic prioritization when 802.1p is enabled. Enumeration: 'priority1': 1, 'priority0': 0, 'priority3': 3, 'priority2': 2, 'priority5': 5, 'priority4': 4, 'priority7': 7, 'priority6': 6.
                                     qosUserPriority 1.3.6.1.4.1.171.10.76.39.1.12.5
                                         qosUserPriorityTable 1.3.6.1.4.1.171.10.76.39.1.12.5.1 no-access
A table mapping evaluated User Priority to Traffic Class, for forwarding by the bridge. Traffic class is a number in the range (0..3).
                                             qosUserPriEntry 1.3.6.1.4.1.171.10.76.39.1.12.5.1.1 no-access
User Priority to Traffic Class mapping.
                                                 qosUserPriIndex 1.3.6.1.4.1.171.10.76.39.1.12.5.1.1.1 integer read-only
For ingress tagged packets, D-Link Smart Switches will refer to these information and prioritize them with 4 different priority queues. If 802.1p is enabled.
                                                 qosUserPriClass 1.3.6.1.4.1.171.10.76.39.1.12.5.1.1.2 integer read-write
The User Class the received frame is mapped to.
                                     qosDiffServTOS 1.3.6.1.4.1.171.10.76.39.1.12.6
                                         qosDSCPTOSMode 1.3.6.1.4.1.171.10.76.39.1.12.6.1 integer read-write
Settings of Qos mode: DSCP QoS or TOS Qos. IEEE 802.1p : It specifies a priority(0~7) value to four queues in WS3 : Low(1,2), Medium(0,3), High(4,5) and Highest(6,7), inclusive that can be used by Quality of Service (QoS) disciplines to differentiate traffic. DSCP : Differentiated services enhancements to the Internet protocol are intended to enable scalable service discrimination in the Internet without the need for per-flow state and signaling at every hop. Enumeration: 'tos': 1, 'dscp': 2.
                                         qosDiffServTypeGroup 1.3.6.1.4.1.171.10.76.39.1.12.6.2
                                             qosDiffServType00 1.3.6.1.4.1.171.10.76.39.1.12.6.2.1 integer read-write
DiffServ Type 0 : IP ToS value = 0
                                             qosDiffServType01 1.3.6.1.4.1.171.10.76.39.1.12.6.2.2 integer read-write
DiffServ Type 01 : IP ToS value = 4
                                             qosDiffServType02 1.3.6.1.4.1.171.10.76.39.1.12.6.2.3 integer read-write
DiffServ Type 02 : IP ToS value = 8
                                             qosDiffServType03 1.3.6.1.4.1.171.10.76.39.1.12.6.2.4 integer read-write
DiffServ Type 03 : IP ToS value = 12
                                             qosDiffServType04 1.3.6.1.4.1.171.10.76.39.1.12.6.2.5 integer read-write
DiffServ Type 04 : IP ToS value = 16
                                             qosDiffServType05 1.3.6.1.4.1.171.10.76.39.1.12.6.2.6 integer read-write
DiffServ Type 05 : IP ToS value = 20
                                             qosDiffServType06 1.3.6.1.4.1.171.10.76.39.1.12.6.2.7 integer read-write
DiffServ Type 06 : IP ToS value = 24
                                             qosDiffServType07 1.3.6.1.4.1.171.10.76.39.1.12.6.2.8 integer read-write
DiffServ Type 07 : IP ToS value = 28
                                             qosDiffServType08 1.3.6.1.4.1.171.10.76.39.1.12.6.2.9 integer read-write
DiffServ Type 08 : IP ToS value = 32
                                             qosDiffServType09 1.3.6.1.4.1.171.10.76.39.1.12.6.2.10 integer read-write
DiffServ Type 09 : IP ToS value = 36
                                             qosDiffServType10 1.3.6.1.4.1.171.10.76.39.1.12.6.2.11 integer read-write
DiffServ Type 10 : IP ToS value = 40
                                             qosDiffServType11 1.3.6.1.4.1.171.10.76.39.1.12.6.2.12 integer read-write
DiffServ Type 11 : IP ToS value = 44
                                             qosDiffServType12 1.3.6.1.4.1.171.10.76.39.1.12.6.2.13 integer read-write
DiffServ Type 12 : IP ToS value = 48
                                             qosDiffServType13 1.3.6.1.4.1.171.10.76.39.1.12.6.2.14 integer read-write
DiffServ Type 13 : IP ToS value = 52
                                             qosDiffServType14 1.3.6.1.4.1.171.10.76.39.1.12.6.2.15 integer read-write
DiffServ Type 14 : IP ToS value = 56
                                             qosDiffServType15 1.3.6.1.4.1.171.10.76.39.1.12.6.2.16 integer read-write
DiffServ Type 15 : IP ToS value = 60
                                             qosDiffServType16 1.3.6.1.4.1.171.10.76.39.1.12.6.2.17 integer read-write
DiffServ Type 16 : IP ToS value = 64
                                             qosDiffServType17 1.3.6.1.4.1.171.10.76.39.1.12.6.2.18 integer read-write
DiffServ Type 17 : IP ToS value = 68
                                             qosDiffServType18 1.3.6.1.4.1.171.10.76.39.1.12.6.2.19 integer read-write
DiffServ Type 18 : IP ToS value = 72
                                             qosDiffServType19 1.3.6.1.4.1.171.10.76.39.1.12.6.2.20 integer read-write
DiffServ Type 19 : IP ToS value = 76
                                             qosDiffServType20 1.3.6.1.4.1.171.10.76.39.1.12.6.2.21 integer read-write
DiffServ Type 20 : IP ToS value = 80
                                             qosDiffServType21 1.3.6.1.4.1.171.10.76.39.1.12.6.2.22 integer read-write
DiffServ Type 21 : IP ToS value = 84
                                             qosDiffServType22 1.3.6.1.4.1.171.10.76.39.1.12.6.2.23 integer read-write
DiffServ Type 22 : IP ToS value = 88
                                             qosDiffServType23 1.3.6.1.4.1.171.10.76.39.1.12.6.2.24 integer read-write
DiffServ Type 23 : IP ToS value = 92
                                             qosDiffServType24 1.3.6.1.4.1.171.10.76.39.1.12.6.2.25 integer read-write
DiffServ Type 24 : IP ToS value = 96
                                             qosDiffServType25 1.3.6.1.4.1.171.10.76.39.1.12.6.2.26 integer read-write
DiffServ Type 25 : IP ToS value = 100
                                             qosDiffServType26 1.3.6.1.4.1.171.10.76.39.1.12.6.2.27 integer read-write
DiffServ Type 26 : IP ToS value = 104
                                             qosDiffServType27 1.3.6.1.4.1.171.10.76.39.1.12.6.2.28 integer read-write
DiffServ Type 27 : IP ToS value = 108
                                             qosDiffServType28 1.3.6.1.4.1.171.10.76.39.1.12.6.2.29 integer read-write
DiffServ Type 28 : IP ToS value = 112
                                             qosDiffServType29 1.3.6.1.4.1.171.10.76.39.1.12.6.2.30 integer read-write
DiffServ Type 29 : IP ToS value = 116
                                             qosDiffServType30 1.3.6.1.4.1.171.10.76.39.1.12.6.2.31 integer read-write
DiffServ Type 30 : IP ToS value = 120
                                             qosDiffServType31 1.3.6.1.4.1.171.10.76.39.1.12.6.2.32 integer read-write
DiffServ Type 31 : IP ToS value = 124
                                             qosDiffServType32 1.3.6.1.4.1.171.10.76.39.1.12.6.2.33 integer read-write
DiffServ Type 32 : IP ToS value = 128
                                             qosDiffServType33 1.3.6.1.4.1.171.10.76.39.1.12.6.2.34 integer read-write
DiffServ Type 33 : IP ToS value = 132
                                             qosDiffServType34 1.3.6.1.4.1.171.10.76.39.1.12.6.2.35 integer read-write
DiffServ Type 34 : IP ToS value = 136
                                             qosDiffServType35 1.3.6.1.4.1.171.10.76.39.1.12.6.2.36 integer read-write
DiffServ Type 35 : IP ToS value = 140
                                             qosDiffServType36 1.3.6.1.4.1.171.10.76.39.1.12.6.2.37 integer read-write
DiffServ Type 36 : IP ToS value = 144
                                             qosDiffServType37 1.3.6.1.4.1.171.10.76.39.1.12.6.2.38 integer read-write
DiffServ Type 37 : IP ToS value = 148
                                             qosDiffServType38 1.3.6.1.4.1.171.10.76.39.1.12.6.2.39 integer read-write
DiffServ Type 38 : IP ToS value = 152
                                             qosDiffServType39 1.3.6.1.4.1.171.10.76.39.1.12.6.2.40 integer read-write
DiffServ Type 39 : IP ToS value = 156
                                             qosDiffServType40 1.3.6.1.4.1.171.10.76.39.1.12.6.2.41 integer read-write
DiffServ Type 40 : IP ToS value = 160
                                             qosDiffServType41 1.3.6.1.4.1.171.10.76.39.1.12.6.2.42 integer read-write
DiffServ Type 41 : IP ToS value = 164
                                             qosDiffServType42 1.3.6.1.4.1.171.10.76.39.1.12.6.2.43 integer read-write
DiffServ Type 42 : IP ToS value = 168
                                             qosDiffServType43 1.3.6.1.4.1.171.10.76.39.1.12.6.2.44 integer read-write
DiffServ Type 43 : IP ToS value = 172
                                             qosDiffServType44 1.3.6.1.4.1.171.10.76.39.1.12.6.2.45 integer read-write
DiffServ Type 44 : IP ToS value = 176
                                             qosDiffServType45 1.3.6.1.4.1.171.10.76.39.1.12.6.2.46 integer read-write
DiffServ Type 45 : IP ToS value = 180
                                             qosDiffServType46 1.3.6.1.4.1.171.10.76.39.1.12.6.2.47 integer read-write
DiffServ Type 46 : IP ToS value = 184
                                             qosDiffServType47 1.3.6.1.4.1.171.10.76.39.1.12.6.2.48 integer read-write
DiffServ Type 47 : IP ToS value = 188
                                             qosDiffServType48 1.3.6.1.4.1.171.10.76.39.1.12.6.2.49 integer read-write
DiffServ Type 48 : IP ToS value = 192
                                             qosDiffServType49 1.3.6.1.4.1.171.10.76.39.1.12.6.2.50 integer read-write
DiffServ Type 49 : IP ToS value = 196
                                             qosDiffServType50 1.3.6.1.4.1.171.10.76.39.1.12.6.2.51 integer read-write
DiffServ Type 50 : IP ToS value = 200
                                             qosDiffServType51 1.3.6.1.4.1.171.10.76.39.1.12.6.2.52 integer read-write
DiffServ Type 51 : IP ToS value = 204
                                             qosDiffServType52 1.3.6.1.4.1.171.10.76.39.1.12.6.2.53 integer read-write
DiffServ Type 52 : IP ToS value = 208
                                             qosDiffServType53 1.3.6.1.4.1.171.10.76.39.1.12.6.2.54 integer read-write
DiffServ Type 53 : IP ToS value = 212
                                             qosDiffServType54 1.3.6.1.4.1.171.10.76.39.1.12.6.2.55 integer read-write
DiffServ Type 54 : IP ToS value = 216
                                             qosDiffServType55 1.3.6.1.4.1.171.10.76.39.1.12.6.2.56 integer read-write
DiffServ Type 55 : IP ToS value = 220
                                             qosDiffServType56 1.3.6.1.4.1.171.10.76.39.1.12.6.2.57 integer read-write
DiffServ Type 56 : IP ToS value = 224
                                             qosDiffServType57 1.3.6.1.4.1.171.10.76.39.1.12.6.2.58 integer read-write
DiffServ Type 57 : IP ToS value = 228
                                             qosDiffServType58 1.3.6.1.4.1.171.10.76.39.1.12.6.2.59 integer read-write
DiffServ Type 58 : IP ToS value = 232
                                             qosDiffServType59 1.3.6.1.4.1.171.10.76.39.1.12.6.2.60 integer read-write
DiffServ Type 59 : IP ToS value = 236
                                             qosDiffServType60 1.3.6.1.4.1.171.10.76.39.1.12.6.2.61 integer read-write
DiffServ Type 60 : IP ToS value = 240
                                             qosDiffServType61 1.3.6.1.4.1.171.10.76.39.1.12.6.2.62 integer read-write
DiffServ Type 61 : IP ToS value = 244
                                             qosDiffServType62 1.3.6.1.4.1.171.10.76.39.1.12.6.2.63 integer read-write
DiffServ Type 62 : IP ToS value = 248
                                             qosDiffServType63 1.3.6.1.4.1.171.10.76.39.1.12.6.2.64 integer read-write
DiffServ Type 63 : IP ToS value = 252
                                         qosTOSGroup 1.3.6.1.4.1.171.10.76.39.1.12.6.3
                                             qosTOSType00 1.3.6.1.4.1.171.10.76.39.1.12.6.3.1 integer read-write
TOS 0
                                             qosTOSType01 1.3.6.1.4.1.171.10.76.39.1.12.6.3.2 integer read-write
TOS 01
                                             qosTOSType02 1.3.6.1.4.1.171.10.76.39.1.12.6.3.3 integer read-write
TOS 02
                                             qosTOSType03 1.3.6.1.4.1.171.10.76.39.1.12.6.3.4 integer read-write
TOS 03
                                             qosTOSType04 1.3.6.1.4.1.171.10.76.39.1.12.6.3.5 integer read-write
TOS 04
                                             qosTOSType05 1.3.6.1.4.1.171.10.76.39.1.12.6.3.6 integer read-write
TOS 05
                                             qosTOSType06 1.3.6.1.4.1.171.10.76.39.1.12.6.3.7 integer read-write
TOS 06
                                             qosTOSType07 1.3.6.1.4.1.171.10.76.39.1.12.6.3.8 integer read-write
TOS 07
                                     qosPriSettings 1.3.6.1.4.1.171.10.76.39.1.12.7
                                         qosPriSettingsTable 1.3.6.1.4.1.171.10.76.39.1.12.7.1 no-access
A list of port priority settings.
                                             qosPriSettingsEntry 1.3.6.1.4.1.171.10.76.39.1.12.7.1.1 no-access
A list of port priority settings Entries.
                                                 qosPriSetPortIndex 1.3.6.1.4.1.171.10.76.39.1.12.7.1.1.1 integer read-only
A port identifier that is in the range of 1 to ifNumber.
                                                 qosPriSetPortType 1.3.6.1.4.1.171.10.76.39.1.12.7.1.1.2 integer read-write
The port priority setting type. (ex. none = 0, 802.1p = 2, DSCP = 4. If you want enable 802.1p & DSCP, the value is 2 + 4 = 6. Enumeration: 'none': 0, 'dscp-tos': 4, 'ieee8021P': 2, 'ieee8021P-dscp-tos': 6.
                                     qosAclPrioritySettings 1.3.6.1.4.1.171.10.76.39.1.12.8
                                         ipv4aclQosTable 1.3.6.1.4.1.171.10.76.39.1.12.8.1 no-access
A list of priority by acl setting.
                                             ipv4aclQosEntry 1.3.6.1.4.1.171.10.76.39.1.12.8.1.1 no-access
A list of priority by acl setting entry.
                                                 ipv4aclQosIndex 1.3.6.1.4.1.171.10.76.39.1.12.8.1.1.1 integer32 read-only
Index of priority by acl setting.
                                                 ipv4aclQosType 1.3.6.1.4.1.171.10.76.39.1.12.8.1.1.2 integer read-write
Type of priority by acl setting. Enumeration: 'udp': 3, 'protocol': 5, 'ip': 1, 'tcp': 2, 'mac': 0, 'vlanid': 4.
                                                 ipv4aclQosMACAddr 1.3.6.1.4.1.171.10.76.39.1.12.8.1.1.3 macaddress read-write
Dst MAC of priority by acl setting.
                                                 ipv4aclQosIPAddr 1.3.6.1.4.1.171.10.76.39.1.12.8.1.1.4 ipaddress read-write
Dst IP of priority by acl setting
                                                 ipv4aclQosTCPUDPPort 1.3.6.1.4.1.171.10.76.39.1.12.8.1.1.5 integer32 read-write
Dst TCP/UDP port of priority by acl setting
                                                 ipv4aclQosVlanID 1.3.6.1.4.1.171.10.76.39.1.12.8.1.1.6 integer32 read-write
VLAN ID of priority by acl setting
                                                 ipv4aclQosProtocol 1.3.6.1.4.1.171.10.76.39.1.12.8.1.1.7 integer32 read-write
Ip protocol number of priority by acl setting
                                                 ipv4aclQosAssignClass 1.3.6.1.4.1.171.10.76.39.1.12.8.1.1.8 integer read-write
Be mapped class of priority by acl setting. Enumeration: 'class2': 2, 'class3': 3, 'class0': 0, 'class1': 1.
                                                 ipv4aclQosStatus 1.3.6.1.4.1.171.10.76.39.1.12.8.1.1.9 rowstatus read-write
Status of priority by acl setting.
                                         aclQosTable 1.3.6.1.4.1.171.10.76.39.1.12.8.2 no-access
A list of priority by acl setting.
                                             aclQosEntry 1.3.6.1.4.1.171.10.76.39.1.12.8.2.1 no-access
A list of priority by acl setting entry.
                                                 aclQosIndex 1.3.6.1.4.1.171.10.76.39.1.12.8.2.1.1 integer32 read-only
Index of priority by acl setting.
                                                 aclQosType 1.3.6.1.4.1.171.10.76.39.1.12.8.2.1.2 integer read-write
Type of priority by acl setting. Enumeration: 'udp': 3, 'protocol': 5, 'ip': 1, 'tcp': 2, 'mac': 0, 'vlanid': 4, 'ipv6': 6, 'ipv6traffic-class': 7.
                                                 aclQosMACAddr 1.3.6.1.4.1.171.10.76.39.1.12.8.2.1.3 macaddress read-write
Dst MAC of priority by acl setting.
                                                 aclQosIPAddr 1.3.6.1.4.1.171.10.76.39.1.12.8.2.1.4 ipaddress read-write
Dst IP of priority by acl setting
                                                 aclQosIPv6Addr 1.3.6.1.4.1.171.10.76.39.1.12.8.2.1.5 ipv6address read-write
Dst IP of priority by acl setting.
                                                 aclQosTCPUDPPort 1.3.6.1.4.1.171.10.76.39.1.12.8.2.1.6 integer32 read-write
Dst TCP/UDP port of priority by acl setting
                                                 aclQosVlanID 1.3.6.1.4.1.171.10.76.39.1.12.8.2.1.7 integer32 read-write
VLAN ID of priority by acl setting
                                                 aclQosProtocol 1.3.6.1.4.1.171.10.76.39.1.12.8.2.1.8 integer32 read-write
Ip protocol number of priority by acl setting
                                                 aclQosIP6TC 1.3.6.1.4.1.171.10.76.39.1.12.8.2.1.10 integer32 read-write
Ipv6 Traffic Class number of priority by acl setting
                                                 aclQosAssignClass 1.3.6.1.4.1.171.10.76.39.1.12.8.2.1.98 integer read-write
Be mapped class of priority by acl setting. Enumeration: 'class2': 2, 'class3': 3, 'class0': 0, 'class1': 1.
                                                 aclQosStatus 1.3.6.1.4.1.171.10.76.39.1.12.8.2.1.99 rowstatus read-write
Status of priority by acl setting.
                                     cosBandwidthCtrlSettings 1.3.6.1.4.1.171.10.76.39.1.12.9
                                         cosBandwidthCtrlTable 1.3.6.1.4.1.171.10.76.39.1.12.9.1 no-access
A list of cosBandwidthCtrlEntry default priority Entries.
                                             cosBandwidthCtrlEntry 1.3.6.1.4.1.171.10.76.39.1.12.9.1.1 no-access
A list of cosBandwidthCtrlEntry default priority priorities.
                                                 cosBandwidthCtrlPortIndex 1.3.6.1.4.1.171.10.76.39.1.12.9.1.1.1 integer32 read-only
A port identifier that is in the range of 1 to ifNumber.
                                                 cosBandwidthCtrlClassIndex 1.3.6.1.4.1.171.10.76.39.1.12.9.1.1.2 integer read-only
A BandwidthCtrlClassIndex identifier that is in the range of 1 to ifNumber.
                                                 cosBandwidthValue 1.3.6.1.4.1.171.10.76.39.1.12.9.1.1.3 integer32 read-write
The BandwidthValue return value.
                               companyTrafficMgmt 1.3.6.1.4.1.171.10.76.39.1.13
                                     bandwidthCtrlSettings 1.3.6.1.4.1.171.10.76.39.1.13.1
                                         bandwidthCtrlTable 1.3.6.1.4.1.171.10.76.39.1.13.1.2 no-access
A table to control the rate limiting parameters either for the entire switch or for each interface in the switch.
                                             bandwidthCtrlEntry 1.3.6.1.4.1.171.10.76.39.1.13.1.2.1 no-access
An entry appears in this table for each physical interface in the switch.
                                                 bandwidthCtrlIndex 1.3.6.1.4.1.171.10.76.39.1.13.1.2.1.1 integer32 read-only
The interface index for which the configuration in this entry applies. For all machines give maximum port number.
                                                 bandwidthCtrlTxThreshold 1.3.6.1.4.1.171.10.76.39.1.13.1.2.1.2 integer32 read-write
Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed. Based on the operating speed of the port, the rate limit will be applied. This value can also be affected by the metering. A value of zero(0) disable rate limiting i.e. sets the port to full speed. The value can be set between 64~102400(Kbits per second) in FE port, 64~1024000 (Kbits per second) in GE port.
                                                 bandwidthCtrlRxThreshold 1.3.6.1.4.1.171.10.76.39.1.13.1.2.1.3 integer32 read-write
Allows to configure the limiting value for the maximum number of receive packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for receive packets on this interface. The value that can be set for this object is limited by the underlying hardware. The value can be set between 64~102400(Kbits per second) in FE port, 64~1024000(Kbits per second) in GE port.
                                                 bandwidthEffecTxThreshold 1.3.6.1.4.1.171.10.76.39.1.13.1.2.1.4 integer32 read-only
This object's value will take effect on the interface speed. Based on the operating speed of the port, the rate limit will be applied. This value can also be affected by the metering. A value of zero(0) disable rate limiting i.e. sets the port to full speed.
                                                 bandwidthEffecRxThreshold 1.3.6.1.4.1.171.10.76.39.1.13.1.2.1.5 integer32 read-only
Allows to configure the limiting value for the maximum number of receive packets that can be transmitted per second over this interface. Setting this object to the value zero disables rate limiting for receive packets on this interface. The value that can be set for this object is limited by the underlying hardware.
                                     trafficCtrlSettings 1.3.6.1.4.1.171.10.76.39.1.13.4
                                         trafficCtrlTrap 1.3.6.1.4.1.171.10.76.39.1.13.4.1 integer read-write
The trap setting of traffic control. Enumeration: 'stormCleared': 2, 'none': 0, 'both': 3, 'stormOccurred': 1.
                                         trafficCtrlTable 1.3.6.1.4.1.171.10.76.39.1.13.4.2 no-access
The traffic control table.
                                             trafficCtrlEntry 1.3.6.1.4.1.171.10.76.39.1.13.4.2.1 no-access
The traffic control entry.
                                                 trafficCtrlIndex 1.3.6.1.4.1.171.10.76.39.1.13.4.2.1.1 integer32 read-only
The traffic control index.
                                                 trafficCtrlActionMode 1.3.6.1.4.1.171.10.76.39.1.13.4.2.1.2 integer read-write
The action mode of traffic control. Enumeration: 'drop': 0, 'shutdown': 1.
                                                 trafficCtrlType 1.3.6.1.4.1.171.10.76.39.1.13.4.2.1.3 integer read-write
The control type of traffic control. (b: Broadcast, m: Multicast, u: Unknown Unicast) Enumeration: 'none': 0, 'b': 1, 'mb': 3, 'm': 2, 'um': 6, '': 4, 'umb': 7, 'ub': 5.
                                                 trafficCtrlThreshold 1.3.6.1.4.1.171.10.76.39.1.13.4.2.1.4 integer32 read-write
The threshold of traffic control.
                                                 trafficCtrlCountDown 1.3.6.1.4.1.171.10.76.39.1.13.4.2.1.5 integer32 read-write
The count down value of traffic control.
                                                 trafficCtrlTimeInterval 1.3.6.1.4.1.171.10.76.39.1.13.4.2.1.6 integer32 read-write
The time interval of traffic control.
                                         trafficCtrlAutoRecoverTime 1.3.6.1.4.1.171.10.76.39.1.13.4.3 integer32 read-write
The recover time of traffic control.
                               companySecurity 1.3.6.1.4.1.171.10.76.39.1.14
                                     securityTrustedHost 1.3.6.1.4.1.171.10.76.39.1.14.1
                                         trustedHostStatus 1.3.6.1.4.1.171.10.76.39.1.14.1.1 integer read-write
This object indicates trusted host function is enabled or disabled. When trusted host function is enabled, D-Link Smart Switches will only allow hosts which you trust to access and control the switch. Your local host IP Addresses must be one of the IP Addresses to avoid disconnection. Enumeration: 'disabled': 2, 'enabled': 1.
                                         ipv4trustedHostTable 1.3.6.1.4.1.171.10.76.39.1.14.1.2 no-access
A table to configure trusted host in the system.
                                             ipv4trustedHostEntry 1.3.6.1.4.1.171.10.76.39.1.14.1.2.1 no-access
Each entry in this table represents rules for particular trusted host.
                                                 ipv4trustedHostIpAddr 1.3.6.1.4.1.171.10.76.39.1.14.1.2.1.1 ipaddress read-only
The IP address of host you allow to access to D-Link Smart Switch. Your local host IP Addresses must be one of the IP Addresses to avoid disconnection.
                                                 ipv4trustedHostIpMask 1.3.6.1.4.1.171.10.76.39.1.14.1.2.1.2 ipaddress read-only
Used to mask with IP address, it allow you set a subnet as a trusted host entry.
                                                 ipv4trustedHostRowStatus 1.3.6.1.4.1.171.10.76.39.1.14.1.2.1.3 rowstatus read-only
The status of an entry in the Trusted Host Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
                                         trustedHostTable 1.3.6.1.4.1.171.10.76.39.1.14.1.3 no-access
A table to configure trusted host for in the system.
                                             trustedHostEntry 1.3.6.1.4.1.171.10.76.39.1.14.1.3.1 no-access
Each entry in this table represents rules for particular trusted host.
                                                 trustedHostIPType 1.3.6.1.4.1.171.10.76.39.1.14.1.3.1.1 integer read-only
Type of IP interface. Enumeration: 'iPv4': 1, 'iPv6': 2.
                                                 trustedHostIpAddr 1.3.6.1.4.1.171.10.76.39.1.14.1.3.1.2 ipv6address read-only
The IP address of host you allow to access to D-Link Smart Switch. Your local host IPv4/6 Addresses must be one of the IP Addresses to avoid disconnection.
                                                 trustedHostIpMask 1.3.6.1.4.1.171.10.76.39.1.14.1.3.1.3 ipv6address read-only
Used to mask with IPv4/6 address, it allow you set a subnet as a trusted host entry.
                                                 trustedHostRowStatus 1.3.6.1.4.1.171.10.76.39.1.14.1.3.1.4 rowstatus read-only
The status of an entry in the Trusted Host Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
                                     securityPortSecurity 1.3.6.1.4.1.171.10.76.39.1.14.2
                                         portSecTable 1.3.6.1.4.1.171.10.76.39.1.14.2.1 no-access
A table to control port security features of the device.
                                             portSecEntry 1.3.6.1.4.1.171.10.76.39.1.14.2.1.1 no-access
An entry appears in port security table for each interface in the system.
                                                 portSecIndex 1.3.6.1.4.1.171.10.76.39.1.14.2.1.1.1 integer32 read-only
The interface index for which the configuration in this entry applies. For all machines give maximum port number.
                                                 portSecState 1.3.6.1.4.1.171.10.76.39.1.14.2.1.1.2 integer read-write
Enable / disable port security admin state for the interface. A given ports' dynamic MAC address learning will be stopped such that the current source MAC addresses entered into the MAC address forwarding table can not be changed once the port security admin state is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 portSecMLA 1.3.6.1.4.1.171.10.76.39.1.14.2.1.1.3 integer32 read-write
Configures interface port security maximum learning address numbers. When given ports' admin state is enabled, allows forwarding table learning address number. The number can be set 0 to 64. Note: Set value 0 means cannot learn MAC address.
                                                 portSecLockAddrMode 1.3.6.1.4.1.171.10.76.39.1.14.2.1.1.4 integer read-write
Configures port security lock address mode for the interface. deleteOnReset : The locked addresses will not age out until the Switch has been reset. deleteOnTimeout : The locked addresses will age out after the aging timer expires. Permanent : The locked addresses will not age out after the aging timer expires. Enumeration: 'permanent': 3, 'deleteOnTimeout': 2, 'deleteOnReset': 1.
                                         portSecFDBPermanentTable 1.3.6.1.4.1.171.10.76.39.1.14.2.2 no-access
A table to control port security FDB Permanent of the device.
                                             portSecFDBPermanentEntry 1.3.6.1.4.1.171.10.76.39.1.14.2.2.1 no-access
An entry appears in port security table for each interface in the system.
                                                 portSecFDBPermIndex 1.3.6.1.4.1.171.10.76.39.1.14.2.2.1.1 integer read-only
The index of the port security MAC entry. For all machines give maximum port number.
                                                 portSecFDBPermVlanID 1.3.6.1.4.1.171.10.76.39.1.14.2.2.1.2 integer read-only
The VLAN ID of the port security MAC entry.
                                                 portSecFDBPermMac 1.3.6.1.4.1.171.10.76.39.1.14.2.2.1.3 macaddress read-only
The MAC address associated of the port security MAC entry.
                                                 portSecFDBPermPort 1.3.6.1.4.1.171.10.76.39.1.14.2.2.1.4 integer read-only
The forwarding port of the port security MAC entry. For all machines give maximum port number.
                                     securityARPSpoofPrevent 1.3.6.1.4.1.171.10.76.39.1.14.3
                                         aRPSpoofPreventTable 1.3.6.1.4.1.171.10.76.39.1.14.3.1 no-access
A table to control ARP Spoofing prevention for the entire switch or for each interface in the switch.
                                             aRPSpoofPreventEntry 1.3.6.1.4.1.171.10.76.39.1.14.3.1.1 no-access
An entry appears in this table for each interface in the system.
                                                 aRPSpoofPreventIpAddr 1.3.6.1.4.1.171.10.76.39.1.14.3.1.1.1 ipaddress no-access
Specifies either the Network or Host address from which the switch can be managed. An address 0.0.0.0 indicates 'Any Manager'.
                                                 aRPSpoofPreventMacAddress 1.3.6.1.4.1.171.10.76.39.1.14.3.1.1.2 macaddress read-write
Ethernet Mac Address.
                                                 aRPSpoofPreventPortList 1.3.6.1.4.1.171.10.76.39.1.14.3.1.1.3 portlist read-write
Specifies the port numbers through which the authorized manager can access the switch. By default the authorized manager is allowed to access the switch through all the ports. If a set of ports are configured in the 'PortList', the manager can access the switch only through the configured ports.
                                                 aRPSpoofPreventRowStatus 1.3.6.1.4.1.171.10.76.39.1.14.3.1.1.4 rowstatus read-only
This object indicates the status of this entry.
                                     securitySSL 1.3.6.1.4.1.171.10.76.39.1.14.5
                                         sslSecurityHttpStatus 1.3.6.1.4.1.171.10.76.39.1.14.5.1 integer read-write
This object is for enabling or disabling secure HTTP in the system. Enumeration: 'enable': 1, 'disable': 2.
                                         sslCiphers 1.3.6.1.4.1.171.10.76.39.1.14.5.2
                                             sslCipherSuiteList 1.3.6.1.4.1.171.10.76.39.1.14.5.2.1 bits read-write
This object is to configure the cipher-suites list. Bits: 'rsa-null-md5': 0, 'dh-rsa-3des-sha': 5, 'rsa-3des-sha': 3, 'dh-rsa-des-sha': 4, 'rsa-des-sha': 2, 'rsa-exp1024-des-sha': 6, 'rsa-null-sha': 1.
                                     securityDhcpServerScreen 1.3.6.1.4.1.171.10.76.39.1.14.7
                                         dhcpServerScreenEnablePortlist 1.3.6.1.4.1.171.10.76.39.1.14.7.1 portlist read-write
To enable or disable DHCP Server Screening port list.
                                         dhcpServerScreenEnableVlanlist 1.3.6.1.4.1.171.10.76.39.1.14.7.2 octet string read-write
To enable or disable DHCP Server Screening vlan list.
                                         dhcpServerScreenLogSuppressDuration 1.3.6.1.4.1.171.10.76.39.1.14.7.3 integer read-write
DSS Trap Log Suppress Duration. Enumeration: 'one-min': 1, 'thirty-min': 30, 'five-min': 5.
                                         filterDHCPServerTable 1.3.6.1.4.1.171.10.76.39.1.14.7.4 no-access
A table to control filter DHCP Server for the entire switch or for each interface in the switch.
                                             filterDHCPServerEntry 1.3.6.1.4.1.171.10.76.39.1.14.7.4.1 no-access
An entry appears in this table for each interface in the system.
                                                 filterDHCPServerIpAddr 1.3.6.1.4.1.171.10.76.39.1.14.7.4.1.1 ipaddress no-access
Specifies either the Network or Host address from which the switch can be managed. An address 0.0.0.0 indicates 'Any Manager'.
                                                 filterDHCPServerClientMacAddr 1.3.6.1.4.1.171.10.76.39.1.14.7.4.1.2 macaddress no-access
Ethernet Mac Address.
                                                 filterDHCPServerPortList 1.3.6.1.4.1.171.10.76.39.1.14.7.4.1.3 portlist read-write
Specifies the port numbers through which the authorized manager can access the switch. By default the authorized manager is allowed to access the switch through all the ports. If a set of ports are configured in the 'PortList', the manager can access the switch only through the configured ports.
                                                 filterDHCPServerVlanList 1.3.6.1.4.1.171.10.76.39.1.14.7.4.1.4 octet string read-write
Specifies the port numbers through which the authorized manager can access the switch. By default the authorized manager is allowed to access the switch through all the ports. If a set of ports are configured in the 'PortList', the manager can access the switch only through the configured ports.
                                                 filterDHCPServerRowStatus 1.3.6.1.4.1.171.10.76.39.1.14.7.4.1.99 rowstatus read-only
This object indicates the status of this entry.
                                     securitySSH 1.3.6.1.4.1.171.10.76.39.1.14.8
                                         sshSecurityStatus 1.3.6.1.4.1.171.10.76.39.1.14.8.1 integer read-write
This object is for enabling or disabling ssh in the system. Enumeration: 'enable': 1, 'disable': 2.
                                         sshMaxAuthFailAttempts 1.3.6.1.4.1.171.10.76.39.1.14.8.2 integer read-write
This object indicates the max auth fail retry attempt times.
                                         sshSessionKeyRekeying 1.3.6.1.4.1.171.10.76.39.1.14.8.3 integer read-write
This object indicates one SSH session rekey time interval. Enumeration: 'ten-min': 1, 'never': 0, 'sixty-min': 3, 'thirty-min': 2.
                                         sshMaxSession 1.3.6.1.4.1.171.10.76.39.1.14.8.4 integer read-write
This object indicates max SSH session number supported in system.
                                         sshConnectionTimeout 1.3.6.1.4.1.171.10.76.39.1.14.8.5 integer read-write
This object indicates SSH connection timeout value.
                                         sshAuthenMethodPassWordAdmin 1.3.6.1.4.1.171.10.76.39.1.14.8.6 integer read-write
The object indicates authen method password is enabled or disabled. Enumeration: 'enable': 1, 'disable': 2.
                                         sshAuthenMethodPubKeyAdmin 1.3.6.1.4.1.171.10.76.39.1.14.8.7 integer read-write
The object indicates authen method public-key is enabled or disabled. Enumeration: 'enable': 1, 'disable': 2.
                                         sshAuthenMethodHostKeyAdmin 1.3.6.1.4.1.171.10.76.39.1.14.8.8 integer read-write
The object indicates authen method host-key is enabled or disabled. Enumeration: 'enable': 1, 'disable': 2.
                                         sshCipherSuiteList 1.3.6.1.4.1.171.10.76.39.1.14.8.9 bits read-only
This object is to configure the cipher-suites list. Bits: 'tripleDESCBC': 0.
                                         sshMacSuiteList 1.3.6.1.4.1.171.10.76.39.1.14.8.10 bits read-write
This object is to configure the MAC-list. Bits: 'hMAC-SHA1': 0, 'hMAC-MD5': 1.
                                         sshPublKeyRSAAdmin 1.3.6.1.4.1.171.10.76.39.1.14.8.11 integer read-write
The object indicates Public key generating algorithm RSA is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                         sshUserInfoTable 1.3.6.1.4.1.171.10.76.39.1.14.8.12 no-access
A table to configure SSH user auth in the system.
                                               sshUserInfoEntry 1.3.6.1.4.1.171.10.76.39.1.14.8.12.1 no-access
An entry to configure user auth in the system.
                                                   sshUserInfoID 1.3.6.1.4.1.171.10.76.39.1.14.8.12.1.1 integer32 read-only
The Schedule identifier. The maximum number of Schedule entry is the number of ports supported PoE function. The value must be between 1 and 8.
                                                   sshUserInfoUserName 1.3.6.1.4.1.171.10.76.39.1.14.8.12.1.2 displaystring read-only
The ssh user name associated with the SSH suer Info. entry (e.g., `admin, user').
                                                   sshUserInfoAuth 1.3.6.1.4.1.171.10.76.39.1.14.8.12.1.3 integer read-write
The object indicates which auth used by the user. Enumeration: 'publickey': 4, 'hostbased': 1, 'password': 2.
                                                   sshUserInfoHostName 1.3.6.1.4.1.171.10.76.39.1.14.8.12.1.4 displaystring read-write
The ssh host name associated with the SSH suer Info. entry (e.g., `DUT1, DUT2').
                                                   sshUserInfoHostIp 1.3.6.1.4.1.171.10.76.39.1.14.8.12.1.5 ipaddress read-write
SSH HostBased IP Address of the system.
                                     securityTrafficSeg 1.3.6.1.4.1.171.10.76.39.1.14.9
                                         trafficSegTable 1.3.6.1.4.1.171.10.76.39.1.14.9.1 no-access
A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. This Port-channel table is indexed through Key values and allows to configure link selection policy and the Mac address for the port-channel. All other objects in this table displays the details of the port-channel
                                             trafficSegEntry 1.3.6.1.4.1.171.10.76.39.1.14.9.1.1 no-access
There is one entry in this table for each created port-channel port
                                                 trafficSegIfIndex 1.3.6.1.4.1.171.10.76.39.1.14.9.1.1.1 interfaceindex read-only
The ifIndex of the port-channel(Aggregator's interface index).
                                                 trafficSegMemberList 1.3.6.1.4.1.171.10.76.39.1.14.9.1.1.2 portlist read-write
Port list of port channel.
                                     securityIpMacPortBinding 1.3.6.1.4.1.171.10.76.39.1.14.10
                                           impbSettingTable 1.3.6.1.4.1.171.10.76.39.1.14.10.1 no-access
A table to control IP-MAC-Port Binding Setting features of the device.
                                               impbSettingEntry 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1 no-access
An entry appears in IP-MAC-Port Binding Setting table for each interface in the system.
                                                   impbPortIndex 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.1 integer read-only
Specifies the port numbers through which the authorized manager can access the switch. By default the authorized manager is allowed to access the switch through all the ports. If a set of ports are configured in the 'PortList', the manager can access the switch only through the configured ports.
                                                   impbPortState 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.2 integer read-write
Disable / enable IP-MAC-Port Binding admin state for the interface. Enumeration: 'disabled': 0, 'enabled': 1.
                                                   impbPortDHCPSnoopingState 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.4 integer read-write
Disable / enable IP-MAC-Port Binding DHCP snooping state for the interface. Enumeration: 'disabled': 0, 'enabled': 1.
                                                   impbPortArpInspectionState 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.5 integer read-write
Set IP-MAC-Port Binding ARP Inspection state for the interface. Enumeration: 'disabled': 0, 'strict': 1, 'loose': 2.
                                                   impbPortIpInspectionState 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.6 integer read-write
Set IP-MAC-Port Binding IP Inspection state for the interface. Enumeration: 'disabled': 0, 'enabled': 1.
                                                   impbPortAllowZeroIPState 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.7 integer read-write
Disable / enable IP-MAC-Port Binding Allow-Zero-IP state for the interface. Enumeration: 'disabled': 0, 'enabled': 1.
                                                   impbPortForwardDHCPPktState 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.8 integer read-write
Disable / enable IP-MAC-Port Binding Forward-DHCP-Packet state for the interface. Enumeration: 'disabled': 0, 'enabled': 1.
                                                   impbPortDHCPMaxEntryIPv4 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.9 integer32 read-write
Set the maximum number of IPv4 entries that can be learned for the interface.
                                                   impbPortDHCPMaxEntryIPv6 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.10 integer32 read-write
Set the maximum number of IPv6 entries that can be learned for the interface.
                                                   impbPortNDInspectionState 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.11 integer read-write
Set IP-MAC-Port Binding ND Inspection state for the interface. Enumeration: 'disabled': 0, 'enabled': 1.
                                                   impbPortProtocolState 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.12 integer read-write
Set IP-MAC-Port Binding protocol state for the interface. Enumeration: 'all': 2, 'ipv4': 0, 'ipv6': 1.
                                                   impbPortDHCPv4SetVlanList 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.13 octet string read-write
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to map for this Instance. If the VlanId to Instance Mapping has to be known then any one of the VlanMapped object should be used.If a vlan is already mapped to this Instance, it may not be mapped again. This object is used only for SET operation. GET Operation returns null values.
                                                   impbPortDHCPv4VlanList1k 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.14 octet string read-only
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this DHCP snooping, the bit corresponding to that VLAN is set to '1'.
                                                   impbPortDHCPv4VlanList2k 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.15 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1025 through 2048. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this DHCPv4 snooping, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4094.
                                                   impbPortDHCPv4VlanList3k 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.16 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2049 through 3072. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this DHCPv4 snooping the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4094.
                                                   impbPortDHCPv4VlanList4k 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.17 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3073 through 4094. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this DHCPv4 snooping, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4094.
                                                   impbPortDHCPv6SetVlanList 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.18 octet string read-write
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. The set of vlans configured by management to map for this Instance. If the VlanId to Instance Mapping has to be known then any one of the VlanMapped object should be used.If a vlan is already mapped to this Instance, it may not be mapped again. This object is used only for SET operation. GET Operation returns null values.
                                                   impbPortDHCPv6VlanList1k 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.19 octet string read-only
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this DHCP snooping, the bit corresponding to that VLAN is set to '1'.
                                                   impbPortDHCPv6VlanList2k 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.20 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1025 through 2048. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this DHCPv6 snooping, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4094.
                                                   impbPortDHCPv6VlanList3k 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.21 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2049 through 3072. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this DHCPv6 snooping the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4094.
                                                   impbPortDHCPv6VlanList4k 1.3.6.1.4.1.171.10.76.39.1.14.10.1.1.22 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3073 through 4094. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this DHCPv6 snooping, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4094.
                                           impbAutoScanTable 1.3.6.1.4.1.171.10.76.39.1.14.10.2 no-access
A table to control auto scan features of the device.
                                               impbAutoScanEntry 1.3.6.1.4.1.171.10.76.39.1.14.10.2.1 no-access
An entry appears in auto scan table for each interface in the system.
                                                   impbAutoScanMacAddress 1.3.6.1.4.1.171.10.76.39.1.14.10.2.1.1 macaddress read-only
The MAC address associated of the auto scan entry.
                                                   impbAutoScanPort 1.3.6.1.4.1.171.10.76.39.1.14.10.2.1.2 integer32 read-only
The port number of the auto scan entry. For all machines give maximum port number.
                                                   impbAutoScanIpAddress 1.3.6.1.4.1.171.10.76.39.1.14.10.2.1.3 displaystring read-only
The IP address associated of the auto scan entry.
                                                   impbAutoScanVlanId 1.3.6.1.4.1.171.10.76.39.1.14.10.2.1.4 integer32 read-only
The VLAN ID of the auto scan entry.
                                                   impbAutoScanBinding 1.3.6.1.4.1.171.10.76.39.1.14.10.2.1.5 integer read-write
Disable / enable IP-MAC-Port Binding for the entry. Enumeration: 'disabled': 0, 'enabled': 1.
                                           impbBindingListTable 1.3.6.1.4.1.171.10.76.39.1.14.10.3 no-access
A table to control Manual IP-MAC-Port Binding white list features of the device.
                                               impbBindingListEntry 1.3.6.1.4.1.171.10.76.39.1.14.10.3.1 no-access
An entry appears in Manual IP-MAC-Port Binding white list table for each interface in the system.
                                                   impbBindingListIpAddress 1.3.6.1.4.1.171.10.76.39.1.14.10.3.1.1 displaystring read-only
The IP address associated of the Manual IP-MAC-PORT Binding white list entry.
                                                   impbBindingListMacAddress 1.3.6.1.4.1.171.10.76.39.1.14.10.3.1.2 macaddress read-only
The MAC address associated of the Manual IP-MAC-PORT Binding white list entry.
                                                   impbBindingListPort 1.3.6.1.4.1.171.10.76.39.1.14.10.3.1.3 integer32 read-write
The port number of the Manual IP-MAC-PORT Binding white list entry.
                                                   impbBindingListRowStatus 1.3.6.1.4.1.171.10.76.39.1.14.10.3.1.4 rowstatus read-only
The status of a row in impbBindingListTable. By setting this object, new entries can be created in impbBindingListTable and existing entries can be removed from impbBindingListTable. It can be used as specified in the SNMP v2 standard.
                                           impbBlockListTable 1.3.6.1.4.1.171.10.76.39.1.14.10.4 no-access
A table to control IP-MAC-Port Binding black list of the device.
                                               impbBlockListEntry 1.3.6.1.4.1.171.10.76.39.1.14.10.4.1 no-access
An entry appears in Manual IP-MAC-Port Binding black list table for each interface in the system.
                                                   impbBlockListMacAddress 1.3.6.1.4.1.171.10.76.39.1.14.10.4.1.1 macaddress read-only
The MAC address associated of the IP-MAC-PORT Binding black list entry.
                                                   impbBlockListVlanId 1.3.6.1.4.1.171.10.76.39.1.14.10.4.1.2 integer32 read-only
The VLAN ID of the IP-MAC-PORT Binding black list entry.
                                                   impbBlockListPort 1.3.6.1.4.1.171.10.76.39.1.14.10.4.1.3 integer32 read-only
The port number of the IP-MAC-PORT Binding black list entry.
                                                   impbBlockListIpAddress 1.3.6.1.4.1.171.10.76.39.1.14.10.4.1.4 displaystring read-only
The IP address associated of the IP-MAC-PORT Binding black list entry.
                                                   impbBlockListStatus 1.3.6.1.4.1.171.10.76.39.1.14.10.4.1.5 integer read-write
nothing/delete IP-MAC-Port Binding for the interface. Enumeration: 'nothing': 0, 'deleted': 1.
                                           impbAutoScanIpAddressFrom 1.3.6.1.4.1.171.10.76.39.1.14.10.5 ipv6address read-write
The begin for IP address associated of the IP-MAC-PORT Binding auto scan entry.
                                           impbAutoScanIpAddressTo 1.3.6.1.4.1.171.10.76.39.1.14.10.6 ipv6address read-write
The end for IP address associated of the IP-MAC-PORT Binding auto scan entry.
                                           impbAutoScanStatus 1.3.6.1.4.1.171.10.76.39.1.14.10.7 integer read-write
Nothing / scan IP-MAC-Port Binding auto scan for the interface. Enumeration: 'nothing': 0, 'scan': 1.
                                           impbDhcpSnoopingTable 1.3.6.1.4.1.171.10.76.39.1.14.10.8 no-access
A table to display DHCP snooping entries of the device.
                                               impbDhcpSnoopingEntry 1.3.6.1.4.1.171.10.76.39.1.14.10.8.1 no-access
An entry appears in DHCP snooping table for each interface in the system.
                                                   impbDhcpSnoopingMacAddress 1.3.6.1.4.1.171.10.76.39.1.14.10.8.1.1 macaddress read-only
The MAC address associated of the DHCP snooping entry.
                                                   impbDhcpSnoopingIpAddress 1.3.6.1.4.1.171.10.76.39.1.14.10.8.1.2 ipv6address read-only
The IP address associated of the DHCP snooping entry.
                                                   impbDhcpSnoopingLeaseTime 1.3.6.1.4.1.171.10.76.39.1.14.10.8.1.3 integer32 read-only
The lease time associated of the DHCP snooping entry.
                                                   impbDhcpSnoopingPort 1.3.6.1.4.1.171.10.76.39.1.14.10.8.1.4 integer32 read-only
The port number associated of the DHCP snooping entry.
                                           impbRoamingState 1.3.6.1.4.1.171.10.76.39.1.14.10.9 integer read-write
Disable / enable IP-MAC-Port Binding roaming state. Enumeration: 'disabled': 0, 'enabled': 1.
                                           impbVlanModeState 1.3.6.1.4.1.171.10.76.39.1.14.10.10 integer read-write
Disable / enable IP-MAC-Port Binding vlan mode state. Enumeration: 'disabled': 0, 'enabled': 1.
                                           impbVlanModeVlanList 1.3.6.1.4.1.171.10.76.39.1.14.10.11 portlist read-write
IP-MAC-Port Binding vlan mode VID list.
                                           impbLogState 1.3.6.1.4.1.171.10.76.39.1.14.10.12 integer read-write
Configure IP-MAC-Port Binding log state. Enumeration: 'disabled': 0, 'all': 3, 'ipv4': 1, 'ipv6': 2.
                                           impbDHCPv6PrefixDelegationSnoopState 1.3.6.1.4.1.171.10.76.39.1.14.10.13 integer read-write
Configure DHCPv6 PD snooping state. Enumeration: 'disabled': 0, 'enabled': 1.
                                           impbBindingtraplog 1.3.6.1.4.1.171.10.76.39.1.14.10.14 integer read-write
This object is for enabling or disabling topology change event trap in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                           impbBindingtrap 1.3.6.1.4.1.171.10.76.39.1.14.10.15
                                                 impbBindingtrapsign 1.3.6.1.4.1.171.10.76.39.1.14.10.15.1
The object is for IMPB trap sign in the system.
                                           impbAutoScanCurrentStatus 1.3.6.1.4.1.171.10.76.39.1.14.10.16 integer read-only
Show Auto scan status Enumeration: 'scanning': 1, 'stop': 0.
                                     securityAAC 1.3.6.1.4.1.171.10.76.39.1.14.11
                                           aacAuthenAdminState 1.3.6.1.4.1.171.10.76.39.1.14.11.1 integer read-write
This object indicates the Access Authentication is enable or disable. Enumeration: 'disabled': 2, 'enabled': 1.
                                           aacAuthParamResponseTimeout 1.3.6.1.4.1.171.10.76.39.1.14.11.2 integer read-write
Timeout in second for login authentication response.
                                           aacAuthParamAttempt 1.3.6.1.4.1.171.10.76.39.1.14.11.3 integer read-write
The amount for login authentication, if login failure exceed, connection or access would be locked.
                                           aacAPAuthMethodGroup 1.3.6.1.4.1.171.10.76.39.1.14.11.4
                                               aacAPLoginMethod 1.3.6.1.4.1.171.10.76.39.1.14.11.4.1
                                                   aacAPConsoleLoginMethod 1.3.6.1.4.1.171.10.76.39.1.14.11.4.1.1 integer read-write
Specify the way which has to execute authentication while login the system and the method for authentication.Access system via local console
                                                   aacAPTelnetLoginMethod 1.3.6.1.4.1.171.10.76.39.1.14.11.4.1.2 integer read-write
Specify the way which has to execute authentication while login the system and the method for authentication.Access system via telnet.
                                                   aacAPSSHLoginMethod 1.3.6.1.4.1.171.10.76.39.1.14.11.4.1.3 integer read-write
Specify the way which has to execute authentication while login the system and the method for authentication.Access system via SSH.
                                                   aacAPHttpLoginMethod 1.3.6.1.4.1.171.10.76.39.1.14.11.4.1.4 integer read-write
Specify the way which has to execute authentication while login the system and the method for authentication.Access system via HTTP.
                                               aacAPEnableMethod 1.3.6.1.4.1.171.10.76.39.1.14.11.4.2
                                                   aacAPConsoleEnableMethod 1.3.6.1.4.1.171.10.76.39.1.14.11.4.2.1 integer read-write
Specify the way which has to execute authentication while login the system and the method for authentication.Access system via local console.
                                                   aacAPTelnetEnableMethod 1.3.6.1.4.1.171.10.76.39.1.14.11.4.2.2 integer read-write
Specify the way which has to execute authentication while login the system and the method for authentication.Access system via telnet.
                                                   aacAPSSHEnableMethod 1.3.6.1.4.1.171.10.76.39.1.14.11.4.2.3 integer read-write
Specify the way which has to execute authentication while login the system and the method for authentication.Access system via SSH.
                                                   aacAPHttpEnableMethod 1.3.6.1.4.1.171.10.76.39.1.14.11.4.2.4 integer read-write
Specify the way which has to execute authentication while login the system and the method for authentication.Access system via HTTP.
                                           aacServerGroupTable 1.3.6.1.4.1.171.10.76.39.1.14.11.5 no-access
A table that contains informations about server group.
                                               aacServerGroupEntry 1.3.6.1.4.1.171.10.76.39.1.14.11.5.1 no-access
A list of the group including servers.
                                                   aacServerGroupIndex 1.3.6.1.4.1.171.10.76.39.1.14.11.5.1.1 integer read-only
A value that uniquely identifies this SwAACServerGroupEntry .
                                                   aacServerGroupName 1.3.6.1.4.1.171.10.76.39.1.14.11.5.1.2 octet string read-write
A human-readable text string of the method group. The name is writable only if Group is new created, which the value of aacServerGroupRowStatus is 'notReady'.
                                                   aacServersInGroup 1.3.6.1.4.1.171.10.76.39.1.14.11.5.1.3 bits read-write
The list of servers in the group, each bit indicates a specified server ID. The server must be created before including it. Bits: 'id8': 7, 'id9': 8, 'id6': 5, 'id7': 6, 'id4': 3, 'id5': 4, 'id2': 1, 'id3': 2, 'id1': 0, 'id10': 9, 'id11': 10, 'id12': 11, 'id13': 12, 'id14': 13, 'id15': 14, 'id16': 15.
                                                   aacServerGroupRowStatus 1.3.6.1.4.1.171.10.76.39.1.14.11.5.1.4 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                           iPv4aacServerInfoTable 1.3.6.1.4.1.171.10.76.39.1.14.11.6 no-access
A table that contains information about severs.
                                               iPv4aacServerInfoEntry 1.3.6.1.4.1.171.10.76.39.1.14.11.6.1 no-access
A list of the information of server .
                                                   iPv4aacServerIndex 1.3.6.1.4.1.171.10.76.39.1.14.11.6.1.1 integer read-only
A value that uniquely identifies this SwAACServerGroupEntry.
                                                   iPv4aacServerIPAddr 1.3.6.1.4.1.171.10.76.39.1.14.11.6.1.2 ipaddress read-write
The IP address of Server
                                                   iPv4aacServerAuthProtocol 1.3.6.1.4.1.171.10.76.39.1.14.11.6.1.3 integer read-write
The authentication protocol provided by the Server. Enumeration: 'radius': 2, 'tacacsPlus': 1.
                                                   iPv4aacServerAuthPort 1.3.6.1.4.1.171.10.76.39.1.14.11.6.1.4 integer read-write
The TCP/IP port .
                                                   iPv4aacServerAuthKey 1.3.6.1.4.1.171.10.76.39.1.14.11.6.1.5 octet string read-write
The key used while authentication process.
                                                   iPv4aacServerTimeout 1.3.6.1.4.1.171.10.76.39.1.14.11.6.1.6 integer read-write
Server response timeout .
                                                   iPv4aacServerRetryCount 1.3.6.1.4.1.171.10.76.39.1.14.11.6.1.7 integer read-write
Client retry count . (-1: No retry mechanism)
                                                   iPv4aacServerRowStatus 1.3.6.1.4.1.171.10.76.39.1.14.11.6.1.8 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                           aacServerInfoTable 1.3.6.1.4.1.171.10.76.39.1.14.11.7 no-access
A table that contains information about severs.
                                               aacServerInfoEntry 1.3.6.1.4.1.171.10.76.39.1.14.11.7.1 no-access
A list of the information of server .
                                                   aacServerIndex 1.3.6.1.4.1.171.10.76.39.1.14.11.7.1.1 integer read-only
A value that uniquely identifies this SwAACServerGroupEntry.
                                                   aacServerIPType 1.3.6.1.4.1.171.10.76.39.1.14.11.7.1.2 integer read-write
The IP address of the AAC server IP type referred to in this table entry. (IPv4=1, IPv6=2)
                                                   aacServerIPAddr 1.3.6.1.4.1.171.10.76.39.1.14.11.7.1.3 ipv6address read-write
The IP address of Server
                                                   aacServerInterfaceName 1.3.6.1.4.1.171.10.76.39.1.14.11.7.1.4 octet string read-only
Specifies the interface name when the aacServerIPAddr is linklocal address.
                                                   aacServerAuthProtocol 1.3.6.1.4.1.171.10.76.39.1.14.11.7.1.5 integer read-write
The authentication protocol provided by the Server. Enumeration: 'radius': 2, 'tacacsPlus': 1.
                                                   aacServerAuthPort 1.3.6.1.4.1.171.10.76.39.1.14.11.7.1.6 integer read-write
The TCP/IP port .
                                                   aacServerAuthKey 1.3.6.1.4.1.171.10.76.39.1.14.11.7.1.7 octet string read-write
The key used while authentication process.
                                                   aacServerTimeout 1.3.6.1.4.1.171.10.76.39.1.14.11.7.1.8 integer read-write
Server response timeout .
                                                   aacServerRetryCount 1.3.6.1.4.1.171.10.76.39.1.14.11.7.1.9 integer read-write
Client retry count . (-1: No retry mechanism)
                                                   aacServerAccountingPort 1.3.6.1.4.1.171.10.76.39.1.14.11.7.1.10 integer read-write
The accounting port .
                                                   aacServerRowStatus 1.3.6.1.4.1.171.10.76.39.1.14.11.7.1.99 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                           aacLoginMethodListTable 1.3.6.1.4.1.171.10.76.39.1.14.11.8 no-access
A table that contains information about Login authentication method lists.
                                               aacLoginMethodListEntry 1.3.6.1.4.1.171.10.76.39.1.14.11.8.1 no-access
A list of the Authentication methods.
                                                   aacLoginMethodListIndex 1.3.6.1.4.1.171.10.76.39.1.14.11.8.1.1 integer read-only
A value that identifies this method list.
                                                   aacLoginMethodListName 1.3.6.1.4.1.171.10.76.39.1.14.11.8.1.2 octet string read-write
A human-readable text string of the method list.
                                                   aacLoginMethod1 1.3.6.1.4.1.171.10.76.39.1.14.11.8.1.3 integer read-write
The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. Enumeration: 'radius': 2, 'none': -1, 'local': 0, 'tacacsPlus': 1.
                                                   aacLoginMethod2 1.3.6.1.4.1.171.10.76.39.1.14.11.8.1.4 integer read-write
The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. Enumeration: 'radius': 2, 'none': -1, 'local': 0, 'tacacsPlus': 1.
                                                   aacLoginMethod3 1.3.6.1.4.1.171.10.76.39.1.14.11.8.1.5 integer read-write
The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. Enumeration: 'radius': 2, 'none': -1, 'local': 0, 'tacacsPlus': 1.
                                                   aacLoginMethod4 1.3.6.1.4.1.171.10.76.39.1.14.11.8.1.6 integer read-write
The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. Enumeration: 'radius': 2, 'none': -1, 'local': 0, 'tacacsPlus': 1.
                                                   aacLoginMethodListRowStatus 1.3.6.1.4.1.171.10.76.39.1.14.11.8.1.7 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                           aacEnableMethodListTable 1.3.6.1.4.1.171.10.76.39.1.14.11.9 no-access
A table that contains information about Enable authentication method lists.
                                               aacEnableMethodListEntry 1.3.6.1.4.1.171.10.76.39.1.14.11.9.1 no-access
A list of the Authentication methods.
                                                   aacEnableMethodListIndex 1.3.6.1.4.1.171.10.76.39.1.14.11.9.1.1 integer read-only
A value that identifies this method list.
                                                   aacEnableMethodListName 1.3.6.1.4.1.171.10.76.39.1.14.11.9.1.2 octet string read-write
A human-readable text string of the method list.
                                                   aacEnableMethod1 1.3.6.1.4.1.171.10.76.39.1.14.11.9.1.3 integer read-write
The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. Enumeration: 'radius': 2, 'none': -1, 'local': 0, 'tacacsPlus': 1.
                                                   aacEnableMethod2 1.3.6.1.4.1.171.10.76.39.1.14.11.9.1.4 integer read-write
The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. Enumeration: 'radius': 2, 'none': -1, 'local': 0, 'tacacsPlus': 1.
                                                   aacEnableMethod3 1.3.6.1.4.1.171.10.76.39.1.14.11.9.1.5 integer read-write
The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. Enumeration: 'radius': 2, 'none': -1, 'local': 0, 'tacacsPlus': 1.
                                                   aacEnableMethod4 1.3.6.1.4.1.171.10.76.39.1.14.11.9.1.6 integer read-write
The type of Login method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. Enumeration: 'radius': 2, 'none': -1, 'local': 0, 'tacacsPlus': 1.
                                                   aacEnableMethodListRowStatus 1.3.6.1.4.1.171.10.76.39.1.14.11.9.1.7 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                           aacLocalEnablePassword 1.3.6.1.4.1.171.10.76.39.1.14.11.10 displaystring read-write
This object is used to set Local Enable Password.
                                           aacAccountingMethodListTable 1.3.6.1.4.1.171.10.76.39.1.14.11.11 no-access
A table that contains information about Accounting authentication method lists.
                                                 aacAccountingMethodListEntry 1.3.6.1.4.1.171.10.76.39.1.14.11.11.1 no-access
A list of the Authentication methods.
                                                     aacAccountingMethodListIndex 1.3.6.1.4.1.171.10.76.39.1.14.11.11.1.1 integer read-only
A value that identifies this method list.
                                                     aacAccountingMethodListName 1.3.6.1.4.1.171.10.76.39.1.14.11.11.1.2 octet string read-write
A human-readable text string of the method list.
                                                     aacAccountingMethod1 1.3.6.1.4.1.171.10.76.39.1.14.11.11.1.3 integer read-write
The type of Accounting method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. Enumeration: 'radius': 2, 'none': -1, 'local': 0, 'tacacsPlus': 1.
                                                     aacAccountingMethod2 1.3.6.1.4.1.171.10.76.39.1.14.11.11.1.4 integer read-write
The type of Accounting method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. Enumeration: 'radius': 2, 'none': -1, 'local': 0, 'tacacsPlus': 1.
                                                     aacAccountingMethod3 1.3.6.1.4.1.171.10.76.39.1.14.11.11.1.5 integer read-write
The type of Accounting method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. Enumeration: 'radius': 2, 'none': -1, 'local': 0, 'tacacsPlus': 1.
                                                     aacAccountingMethod4 1.3.6.1.4.1.171.10.76.39.1.14.11.11.1.6 integer read-write
The type of Accounting method list. Besides the pre-defined type, it also allow to be set user-defined group by aacServerGroupIndex. Enumeration: 'radius': 2, 'none': -1, 'local': 0, 'tacacsPlus': 1.
                                                     aacAccountingMethodListRowStatus 1.3.6.1.4.1.171.10.76.39.1.14.11.11.1.7 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                           aacAccountingServiceIndex 1.3.6.1.4.1.171.10.76.39.1.14.11.12
                                                 aacAccountingServiceNetwork 1.3.6.1.4.1.171.10.76.39.1.14.11.12.1 integer read-write
This object indicates aac Accounting Service Network is radius_only, default_method_list, method_list_name and disable about Accounting Service Network. Enumeration: 'method-list-name': 2, 'disabled': -1, 'radius-only': 0, 'default-method-list': 1.
                                                 aacAccountingServiceShell 1.3.6.1.4.1.171.10.76.39.1.14.11.12.2 integer read-write
This object indicates aac Accounting Service Shell is radius_only, default_method_list, method_list_name and disable about Accounting Service Network. Enumeration: 'method-list-name': 2, 'disabled': -1, 'radius-only': 0, 'default-method-list': 1.
                                                 aacAccountingServiceSystem 1.3.6.1.4.1.171.10.76.39.1.14.11.12.3 integer read-write
This object indicates aac Accounting System Shell is radius_only, default_method_list, method_list_name and disable about Accounting Service Network. Enumeration: 'method-list-name': 2, 'disabled': -1, 'radius-only': 0, 'default-method-list': 1.
                                           aacAccountingServiceCommand 1.3.6.1.4.1.171.10.76.39.1.14.11.13
                                                 aacAccountingServiceCommandAdministrator 1.3.6.1.4.1.171.10.76.39.1.14.11.13.1 integer read-write
This object indicates which method list Accounting Admin Command Service uses. If the value is -1, it means disabled.
                                                 aacAccountingServiceCommandOperator 1.3.6.1.4.1.171.10.76.39.1.14.11.13.2 integer read-write
This object indicates which method list Accounting Operator Command Service uses. If the value is -1, it means disabled.
                                                 aacAccountingServiceCommandPoweruser 1.3.6.1.4.1.171.10.76.39.1.14.11.13.3 integer read-write
This object indicates which method list Accounting PowerUser Command Service uses. If the value is -1, it means disabled.
                                                 aacAccountingServiceCommandUser 1.3.6.1.4.1.171.10.76.39.1.14.11.13.4 integer read-write
This object indicates which method list Accounting User Command Service uses. If the value is -1, it means disabled.
                                           aacServerPasswordEncryption 1.3.6.1.4.1.171.10.76.39.1.14.11.14 integer read-write
This object is used to configure server password encryption status. Enumeration: 'disabled': 2, 'enabled': 1.
                               companyACLGroup 1.3.6.1.4.1.171.10.76.39.1.15
                                     aclProfile 1.3.6.1.4.1.171.10.76.39.1.15.1
                                         ipv4aclProfileTable 1.3.6.1.4.1.171.10.76.39.1.15.1.1 no-access
A table to ACL profile .
                                             ipv4aclProfileEntry 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1 no-access
Each entry in this table is a ACL profile. Index to the table is ACL profile ID.
                                                 ipv4aclProfileNo 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.1 integer32 read-only
The ACL Profile ID. The ID 1 to 50 is user-defined ACL, and the ID more than 50 is reserved for system-defined ACL. The user only allow to create user-defined ACL ID. And system-defined ACL is read only.
                                                 ipv4aclProfileType 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.2 integer read-write
The ACL Profile type, possible value are l2 (1) - for MAC-based rule, l3 (2) - for IPv4-based rule, arpSP_permit(4) - for ARP Spoofing prevention entry, arpSP_deny(5) - for ARP Spoofing prevention entry, voiceVlan(6) - for Voice VLAN OUI entry. userDefined(9) - for User Defined entry. Note that only l2, l3 and userDefined could be set by user, other is reserved for system to show information. Enumeration: 'aclQos': 8, 'arpSP-deny': 5, 'userDefined': 9, 'impb': 3, 'l2': 1, 'l3': 2, 'arpSP-permit': 4.
                                                 ipv4aclProfileRuleCount 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.3 integer32 read-only
The number of rules in this profile.
                                                 ipv4aclProfileMask 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.4 octet string read-write
Indicate which field want to care in the packet. Turn on the following bits to select the following items Type Item BIT ------------------------------------------ L2 DST_MAC 0 (LSB) L2 SRC_MAC 1 L2 VID 2 L2 8021P_PRIORITY 3 L2 ETHER_TYPE 4 L3 DSCP 5 L3 ICMP_TYPE 6 L3 ICMP_CODE 7 L3 IGMP_TYPE 8 L3 DST_IP 9 L3 SRC_IP 10 L3 DST_PORT 11 L3 SRC_PORT 12 L3 TCPFLAG 13 ARP-SP ARP_SENDER_MAC 14 ARP-SP ARP_SENDER_IP 15 L3 TOS 16 UDF UDF1 17 UDF UDF2 18 UDF UDF3 19 UDF UDF4 20 L3v6 TRAFFIC_CLASS 21 L3v6 DST_IPV6 22 L3v6 SRC_IPV6 23 (MSB) ------------------------------------------- The value is in Hex format.
                                                 ipv4aclProfileDstMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.5 macaddress read-write
The ACL Profile destination MAC address mask. If DST_MAC is turn on in aclProfileMask, it will work with its member rule field,aclL2RuleDstMacAddr, to caculate a range of MAC address which is really care.
                                                 ipv4aclProfileSrcMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.6 macaddress read-write
The ACL Profile source MAC address mask. If SRC_MAC is turn on in aclProfileMask, it will work with its member rule field,aclL2RuleSrcMacAddr, to caculate a range of MAC address which is really care.
                                                 ipv4aclProfileIPProtocol 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.7 integer read-write
Indicate which IP Protocol will be care in this profile. Only profile type is l3 can set the IP protocol. For others, this field will be none. Enumeration: 'none': 0, 'ipProtocolMask': 256, 'udp': 17, 'tcp': 6, 'icmpv6': 58, 'icmp': 1, 'igmp': 2.
                                                 ipv4aclProfileIPProtocolMask 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.8 octet string read-write
The ACL Profile IP protocol mask. If aclProfileIPProtocol set to ipMask, this field will be refered. It will work with its member rule field,aclL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format.
                                                 ipv4aclProfileDstIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.9 ipaddress read-write
The ACL Profile destination IP address mask. If DST_IP is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleDstIpAddr, to caculate a range of IP address which is really care. The value is in HEX format, for example: '255.255.255.0' is presented to 'FFFFFF00'
                                                 ipv4aclProfileSrcIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.10 ipaddress read-write
The ACL Profile source IP address mask. If SRC_IP is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleSrcIpAddr, to caculate a range of IP address which is really care. The value is in HEX format, for example: '255.255.255.0' is presented to 'FFFFFF00'
                                                 ipv4aclProfileDstPortMask 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.11 octet string read-write
The ACL Profile UDP/TCP destination port mask. If DST_PORT is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleTcpUdpDstPort, to caculate a range of destination port which is really care. The value is in HEX format.
                                                 ipv4aclProfileSrcPortMask 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.12 octet string read-write
The ACL Profile UDP/TCP source port mask. If SRC_PORT is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleTcpUdpSrcPort, to caculate a range of source port which is really care. The value is in HEX format.
                                                 ipv4aclProfileArpSenderMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.13 macaddress read-only
The ACL Profile Sender MAC mask. This is only for ARP Spoofing Prevention which is System-defined ACL, and it's not allow to modify. The value is in HEX format.
                                                 ipv4aclProfileArpSenderIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.14 ipaddress read-only
The ACL Profile Sender IP mask. This is only for ARP Spoofing Prevention which is System-defined ACL, and it's not allow to modify. The value is in HEX format.
                                                 ipv4aclProfileUdfOffsetMap 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.15 octet string read-write
Indicate which Udf field want to care in the packet. Turn on the following bits to select the following items Type Item BIT ------------------------------------------ UDF Offset1 0 (LSB) UDF Offset2 1 UDF Offset3 2 UDF Offset4 3 ------------------------------------------- The value is in Hex format.
                                                 ipv4aclUdfOffsetChunk1 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.17 integer32 read-write
The value of offset Chunk.
                                                 ipv4aclUdfOffsetMask1 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.18 octet string read-write
The value of offset MAsk.
                                                 ipv4aclUdfOffsetChunk2 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.20 integer32 read-write
The value of offset Chunk.
                                                 ipv4aclUdfOffsetMask2 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.21 octet string read-write
The value of offset MAsk.
                                                 ipv4aclUdfOffsetChunk3 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.23 integer32 read-write
The value of offset Chunk.
                                                 ipv4aclUdfOffsetMask3 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.24 octet string read-write
The value of offset MAsk.
                                                 ipv4aclUdfOffsetChunk4 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.26 integer32 read-write
The value of offset Chunk.
                                                 ipv4aclUdfOffsetMask4 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.27 octet string read-write
The value of offset MAsk.
                                                 ipv4aclProfileStatus 1.3.6.1.4.1.171.10.76.39.1.15.1.1.1.28 rowstatus read-only
This object indicates the status of this entry, can only be set to 'createAndWait','active' and 'destroy'. When the value of the entry status is 'createAndWait', it could be set to 'active' only if the three values of aclProfileType, aclProfileMask and ProtocolType are not conflicted.
                                         aclProfileTable 1.3.6.1.4.1.171.10.76.39.1.15.1.2 no-access
A table to ACL profile .
                                             aclProfileEntry 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1 no-access
Each entry in this table is a ACL profile. Index to the table is ACL profile ID.
                                                 aclProfileNo 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.1 integer32 read-only
The ACL Profile ID. The ID 1 to 50 is user-defined ACL, and the ID more than 50 is reserved for system-defined ACL. The user only allow to create user-defined ACL ID. And system-defined ACL is read only.
                                                 aclProfileType 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.2 integer read-write
The ACL Profile type, possible value are l2 (1) - for MAC-based rule, l3v4 (2) - for IPv4-based rule, l3v6 (11) - for IPv6-based rule, arpSP_permit(4) - for ARP Spoofing prevention entry, arpSP_deny(5) - for ARP Spoofing prevention entry, voiceVlan(6) - for Voice VLAN OUI entry. userDefined(9) - for User Defined entry. Note that only l2, l3 and userDefined could be set by user, other is reserved for system to show information. Enumeration: 'aclQos': 8, 'arpSP-deny': 5, 'l3v4': 2, 'l3v6': 11, 'impb': 3, 'l2': 1, 'arpSP-permit': 4, 'userDefined': 9.
                                                 aclProfileRuleCount 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.3 integer32 read-only
The number of rules in this profile.
                                                 aclProfileMask 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.4 octet string read-write
Indicate which field want to care in the packet. Turn on the following bits to select the following items Type Item BIT ------------------------------------------ L2 DST_MAC 0 (LSB) L2 SRC_MAC 1 L2 VID 2 L2 8021P_PRIORITY 3 L2 ETHER_TYPE 4 L3 DSCP 5 L3 ICMP_TYPE 6 L3 ICMP_CODE 7 L3 IGMP_TYPE 8 L3 DST_IP 9 L3 SRC_IP 10 L3 DST_PORT 11 L3 SRC_PORT 12 L3 TCPFLAG 13 ARP-SP ARP_SENDER_MAC 14 ARP-SP ARP_SENDER_IP 15 L3 TRAFFIC_CLASS 21 L3 TOS 16 UDF UDF1 17 UDF UDF2 18 UDF UDF3 19 UDF UDF4 20 L3v6 TRAFFIC_CLASS 21 L3v6 DST_IPV6 22 L3v6 SRC_IPV6 23 (MSB) ------------------------------------------- The value is in Hex format.
                                                 aclProfileDstMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.5 macaddress read-write
The ACL Profile destination MAC address mask. If DST_MAC is turn on in aclProfileMask, it will work with its member rule field,aclL2RuleDstMacAddr, to caculate a range of MAC address which is really care.
                                                 aclProfileSrcMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.6 macaddress read-write
The ACL Profile source MAC address mask. If SRC_MAC is turn on in aclProfileMask, it will work with its member rule field,aclL2RuleSrcMacAddr, to caculate a range of MAC address which is really care.
                                                 aclProfileIPProtocol 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.7 integer read-write
Indicate which IP Protocol will be care in this profile. Only profile type is l3 can set the IP protocol. For others, this field will be none. Enumeration: 'none': 0, 'ipProtocolMask': 256, 'udp': 17, 'tcp': 6, 'icmpv6': 58, 'icmp': 1, 'igmp': 2.
                                                 aclProfileIPProtocolMask 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.8 octet string read-write
The ACL Profile IP protocol mask. If aclProfileIPProtocol set to ipMask, this field will be refered. It will work with its member rule field,aclL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format.
                                                 aclProfileDstIpAddrMaskType 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.9 integer read-write
IPv6 Address type. Enumeration: 'iPv4': 1, 'iPv6': 2.
                                                 aclProfileDstIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.10 ipv6address read-write
The ACL Profile destination IP address mask. If DST_IP is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleDstIpAddr, to caculate a range of IP address which is really care. The value is in HEX format, for example: '255.255.255.0' is presented to 'FFFFFF00'
                                                 aclProfileSrcIpAddrMaskType 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.11 integer read-write
IPv6 Address type. Enumeration: 'iPv4': 1, 'iPv6': 2.
                                                 aclProfileSrcIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.12 ipv6address read-write
The ACL Profile source IP address mask. If SRC_IP is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleSrcIpAddr, to caculate a range of IP address which is really care. The value is in HEX format, for example: '255.255.255.0' is presented to 'FFFFFF00'
                                                 aclProfileDstPortMask 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.13 octet string read-write
The ACL Profile UDP/TCP destination port mask. If DST_PORT is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleTcpUdpDstPort, to caculate a range of destination port which is really care. The value is in HEX format.
                                                 aclProfileSrcPortMask 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.14 octet string read-write
The ACL Profile UDP/TCP source port mask. If SRC_PORT is turn on in aclProfileMask, it will work with its member rule field,aclL3RuleTcpUdpSrcPort, to caculate a range of source port which is really care. The value is in HEX format.
                                                 aclProfileArpSenderMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.15 macaddress read-only
The ACL Profile Sender MAC mask. This is only for ARP Spoofing Prevention which is System-defined ACL, and it's not allow to modify. The value is in HEX format.
                                                 aclProfileArpSenderIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.16 ipv6address read-only
The ACL Profile Sender IP mask. This is only for ARP Spoofing Prevention which is System-defined ACL, and it's not allow to modify. The value is in HEX format.
                                                 aclProfileUdfOffsetMap 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.17 octet string read-write
Indicate which Udf field want to care in the packet. Turn on the following bits to select the following items Type Item BIT ------------------------------------------ UDF Offset1 0 (LSB) UDF Offset2 1 UDF Offset3 2 UDF Offset4 3 ------------------------------------------- The value is in Hex format.
                                                 aclUdfOffsetChunk1 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.19 integer32 read-write
The value of offset Chunk.
                                                 aclUdfOffsetMask1 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.20 octet string read-write
The value of offset MAsk.
                                                 aclUdfOffsetChunk2 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.22 integer32 read-write
The value of offset Chunk.
                                                 aclUdfOffsetMask2 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.23 octet string read-write
The value of offset MAsk.
                                                 aclUdfOffsetChunk3 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.25 integer32 read-write
The value of offset Chunk.
                                                 aclUdfOffsetMask3 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.26 octet string read-write
The value of offset MAsk.
                                                 aclUdfOffsetChunk4 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.28 integer32 read-write
The value of offset Chunk.
                                                 aclUdfOffsetMask4 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.29 octet string read-write
The value of offset MAsk.
                                                 aclProfileStatus 1.3.6.1.4.1.171.10.76.39.1.15.1.2.1.30 rowstatus read-only
This object indicates the status of this entry, can only be set to 'createAndWait','active' and 'destroy'. When the value of the entry status is 'createAndWait', it could be set to 'active' only if the three values of aclProfileType, aclProfileMask and ProtocolType are not conflicted.
                                     aclL2Rule 1.3.6.1.4.1.171.10.76.39.1.15.2
                                         aclL2RuleTable 1.3.6.1.4.1.171.10.76.39.1.15.2.1 no-access
A table to configure L2 filter rules in the system.
                                             aclL2RuleEntry 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1 no-access
Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number and Profile ID.
                                                 aclL2AccessID 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.1 integer32 read-only
L2 Filter rule ID. 0 means auto assign.
                                                 aclL2ProfileID 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.2 integer32 read-only
ACL Profile ID which this rule join.
                                                 aclL2RuleEtherType 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.3 integer32 read-write
The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '-1', which means the rule don't care this condition.
                                                 aclL2RuleDstMacAddr 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.4 macaddress read-write
Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero,which means the rule don't care this condition.
                                                 aclL2RuleSrcMacAddr 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.5 macaddress read-write
Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero, which means the rule don't care this condition.. address
                                                 aclL2RuleVlanId 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.6 integer32 read-write
Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. By Default, the value will be '-1', which means the rule don't care this condition.
                                                 aclL2Rule1pPriority 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.7 integer32 read-write
802.1p priority to be matched with the packet. By Default, the value will be '-1', which means the rule don't care this condition.
                                                 aclL2RuleDstMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.8 macaddress read-only
The MAC address Mask work for Destination MAC address. This field is read-only and copy from it's Profile setting.
                                                 aclL2RuleSrcMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.9 macaddress read-only
The MAC address Mask work for Source MAC address. This field is read-only and copy from it's Profile setting.
                                                 aclL2RuleAction 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.11 integer read-write
Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding rules. If the action is 'drop', the packet will be discarded. Enumeration: 'replaceQueue': 7, 'replace1P': 6, 'drop': 2, 'rateLimit': 4, 'allow': 1, 'mirror': 3, 'replaceDSCP': 5.
                                                 aclL2RuleRateLimit 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.12 unsigned32 read-write
Rate limit for matched packet.
                                                 aclL2RuleReplaceDSCP 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.13 integer32 read-write
Replace DSCP for matched packet.
                                                 aclL2RuleReplace1P 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.14 integer32 read-write
Replace DSCP for matched packet.
                                                 aclL2RuleReplaceQueue 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.15 integer32 read-write
ACL L2 Rule Replace Queue.
                                                 aclL2RuleFilterTimeRange 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.16 octet string read-only
ACL L2 Filter Time Range
                                                 aclL2RuleVlanIdMask 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.17 octet string read-write
Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. By Default, the value will be '-1', which means the rule don't care this condition.
                                                 aclL2RuleInPortList 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.51 portlist read-write
Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list.
                                                 aclL2RuleInVlanList 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.52 octet string read-write
Specifies the complete set of Vlan over which this filter is applied for packets ingress at vlan . Notice : Only support one VLAN.
                                                 aclL2RuleStatus 1.3.6.1.4.1.171.10.76.39.1.15.2.1.1.99 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                     aclL3Rule 1.3.6.1.4.1.171.10.76.39.1.15.3
                                         aclL3RuleTable 1.3.6.1.4.1.171.10.76.39.1.15.3.1 no-access
A table to configure L3 filter rules in the system.
                                             aclL3RuleEntry 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1 no-access
Each entry in this table is a L3 filter rule. Index to the table is L3 filter number and Profile ID.
                                                 aclL3RuleAccessID 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.1 integer32 read-only
L3 Filter rule ID. 0 means auto assign.
                                                 aclL3RuleProfileNo 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.2 integer32 read-only
The Profile ID which this rule join.
                                                 aclL3RuleProtocol 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.3 integer read-write
The type of protocol to be checked against the packet. Enumeration: 'udp': 17, 'icmp': 1, 'tcp': 6, 'igmp': 2.
                                                 aclL3RuleProtocolMask 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.4 octet string read-only
The IP protocol mask. This field is read-only and copy from it's Profile setting. It will work with the other field,aclL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format.
                                                 aclL3RuleICMPMessageType 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.5 integer32 read-write
The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1',which means the rule don't care this condition. Some ICMP message types are: echoReply(0), destinationUnreachable(3), sourceQuench(4), redirect(5), echoRequest(8), timeExceeded(11), parameterProblem(12), timestampRequest(13), timestampReply(14), informationRequest(15), informationReply(16), addressMaskRequest(17), addressMaskReply (18),
                                                 aclL3RuleICMPMessageCode 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.6 integer32 read-write
The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1', which means the rule don't care this condition. Some ICMP message codes are : networkUnreachable(0), hostUnreachable(1), protocolUnreachable(2), portUnreachable(3), fragmentNeed(4), sourceRouteFail(5), destNetworkUnknown(6), destHostUnknown(7), srcHostIsolated(8), destNetworkAdminProhibited(9), destHostAdminProhibited(10), networkUnreachableTOS(11), hostUnreachableTOS(12),
                                                 aclL3RuleDstIpAddr 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.7 ipaddress read-write
Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
                                                 aclL3RuleSrcIpAddr 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.8 ipaddress read-write
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
                                                 aclL3RuleDstIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.9 ipaddress read-only
The IP subnet mask for Destination IP address. This field is read-only and copy from it's Profile setting.
                                                 aclL3RuleSrcIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.10 ipaddress read-only
The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting.
                                                 aclL3RuleTcpUdpDstPort 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.11 integer32 read-write
The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.
                                                 aclL3RuleTcpUdpSrcPort 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.12 integer32 read-write
The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.
                                                 aclL3RuleTcpUdpDstPortMask 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.13 octet string read-only
The TCP / UDP Destination port Mask. This field is read-only and copy from it's Profile setting.
                                                 aclL3RuleTcpUdpSrcPortMask 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.14 octet string read-only
The TCP / UDP Source port Mask. This field is read-only and copy from it's Profile setting.
                                                 aclL3RuleTcpAckBit 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.15 integer read-only
The TCP ACK bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition. Enumeration: 'dont-care': -1, 'notEstablish': 2, 'establish': 1.
                                                 aclL3RuleTcpRstBit 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.16 integer read-only
The TCP RST bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition. Enumeration: 'dont-care': -1, 'notEstablish': 2, 'establish': 1.
                                                 aclL3RuleTcpUrgBit 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.17 integer read-only
The TCP Urg bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition. Enumeration: 'dont-care': -1, 'notEstablish': 2, 'establish': 1.
                                                 aclL3RuleTcpPshBit 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.18 integer read-only
The TCP Psh bit to be checked against the packet. The default value is 'dont_care'(-1). which means the rule don't care this condition. Enumeration: 'dont-care': -1, 'notEstablish': 2, 'establish': 1.
                                                 aclL3RuleTcpSynBit 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.19 integer read-only
The TCP Syn bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition. Enumeration: 'dont-care': -1, 'notEstablish': 2, 'establish': 1.
                                                 aclL3RuleTcpFinBit 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.20 integer read-only
The TCP Fin bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition. Enumeration: 'dont-care': -1, 'notEstablish': 2, 'establish': 1.
                                                 aclL3RuleDscp 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.21 integer32 read-only
The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition.
                                                 aclL3RuleTos 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.22 integer32 read-only
The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition.
                                                 aclL3RuleIgmpType 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.23 integer32 read-write
The IGMP Type to be checked against the packet.A default value is '-1', which means the rule don't care this condition.
                                                 aclL3RuleAction 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.25 integer read-write
Specifies the action to be taken on the packet if the filter rule matches. Enumeration: 'replaceQueue': 7, 'replace1P': 6, 'drop': 2, 'rateLimit': 4, 'allow': 1, 'mirror': 3, 'replaceDSCP': 5.
                                                 aclL3RuleRateLimit 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.26 unsigned32 read-write
Rate limit for matched packet.
                                                 aclL3RuleReplaceDSCP 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.27 integer32 read-write
ReplaceDSCP for matched packet.
                                                 aclL3RuleReplace1P 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.28 integer32 read-write
ReplaceDSCP for matched packet.
                                                 aclL3RuleReplaceQueue 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.29 integer32 read-write
Acl L3 Rule Replace Queue.
                                                 aclL3RuleFilterTimeRange 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.30 octet string read-only
ACL L3 Filter Time Range
                                                 aclL3RulePortList 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.51 portlist read-write
Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable.
                                                 aclL3RuleVlanList 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.52 octet string read-write
Specifies the complete set of vlan over which if the packet arrives this filter rule will be applicable. Notice : only support one vlan.
                                                 aclL3RuleStatus 1.3.6.1.4.1.171.10.76.39.1.15.3.1.1.99 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                         aclv6L3RuleTable 1.3.6.1.4.1.171.10.76.39.1.15.3.2 no-access
A table to configure L3 filter rules in the system.
                                             aclv6L3RuleEntry 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1 no-access
Each entry in this table is a L3 filter rule. Index to the table is L3 filter number and Profile ID.
                                                 aclv6L3RuleAccessID 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.1 integer32 read-only
L3 Filter rule ID. 0 means auto assign.
                                                 aclv6L3RuleProfileNo 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.2 integer32 read-only
The Profile ID which this rule join.
                                                 aclv6L3RuleProtocol 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.3 integer read-write
The type of protocol to be checked against the packet. Enumeration: 'icmpv6': 58, 'udp': 17, 'tcp': 6.
                                                 aclv6L3RuleProtocolMask 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.4 octet string read-only
The IP protocol mask. This field is read-only and copy from it's Profile setting. It will work with the other field,aclL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format.
                                                 aclv6L3RuleICMPMessageType 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.5 integer32 read-write
The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1',which means the rule don't care this condition. Some ICMP message types are: echoReply(0), destinationUnreachable(3), sourceQuench(4), redirect(5), echoRequest(8), timeExceeded(11), parameterProblem(12), timestampRequest(13), timestampReply(14), informationRequest(15), informationReply(16), addressMaskRequest(17), addressMaskReply (18),
                                                 aclv6L3RuleICMPMessageCode 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.6 integer32 read-write
The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in aclL3RuleAction. The default value is '-1', which means the rule don't care this condition. Some ICMP message codes are : networkUnreachable(0), hostUnreachable(1), protocolUnreachable(2), portUnreachable(3), fragmentNeed(4), sourceRouteFail(5), destNetworkUnknown(6), destHostUnknown(7), srcHostIsolated(8), destNetworkAdminProhibited(9), destHostAdminProhibited(10), networkUnreachableTOS(11), hostUnreachableTOS(12),
                                                 aclv6L3RuleDstIpAddr 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.7 ipv6address read-write
Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
                                                 aclv6L3RuleSrcIpAddr 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.8 ipv6address read-write
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
                                                 aclv6L3RuleDstIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.9 ipv6address read-only
The IP subnet mask for Destination IP address. This field is read-only and copy from it's Profile setting.
                                                 aclv6L3RuleSrcIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.10 ipv6address read-only
The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting.
                                                 aclv6L3RuleTcpUdpDstPort 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.11 integer32 read-write
The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.
                                                 aclv6L3RuleTcpUdpSrcPort 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.12 integer32 read-write
The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.
                                                 aclv6L3RuleTcpUdpDstPortMask 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.13 octet string read-only
The TCP / UDP Destination port Mask. This field is read-only and copy from it's Profile setting.
                                                 aclv6L3RuleTcpUdpSrcPortMask 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.14 octet string read-only
The TCP / UDP Source port Mask. This field is read-only and copy from it's Profile setting.
                                                 aclv6L3RuleTcpAckBit 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.15 integer read-only
The TCP ACK bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition. Enumeration: 'dont-care': -1, 'notEstablish': 2, 'establish': 1.
                                                 aclv6L3RuleTcpRstBit 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.16 integer read-only
The TCP RST bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition. Enumeration: 'dont-care': -1, 'notEstablish': 2, 'establish': 1.
                                                 aclv6L3RuleTcpUrgBit 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.17 integer read-only
The TCP Urg bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition. Enumeration: 'dont-care': -1, 'notEstablish': 2, 'establish': 1.
                                                 aclv6L3RuleTcpPshBit 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.18 integer read-only
The TCP Psh bit to be checked against the packet. The default value is 'dont_care'(-1). which means the rule don't care this condition. Enumeration: 'dont-care': -1, 'notEstablish': 2, 'establish': 1.
                                                 aclv6L3RuleTcpSynBit 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.19 integer read-only
The TCP Syn bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition. Enumeration: 'dont-care': -1, 'notEstablish': 2, 'establish': 1.
                                                 aclv6L3RuleTcpFinBit 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.20 integer read-only
The TCP Fin bit to be checked against the packet. The default value is 'dont_care'(-1), which means the rule don't care this condition. Enumeration: 'dont-care': -1, 'notEstablish': 2, 'establish': 1.
                                                 aclv6L3RuleTrafficClass 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.21 integer32 read-only
The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition.
                                                 aclv6L3RuleAction 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.24 integer read-write
Specifies the action to be taken on the packet if the filter rule matches. Enumeration: 'replaceQueue': 7, 'replace1P': 6, 'drop': 2, 'rateLimit': 4, 'allow': 1, 'mirror': 3, 'replaceDSCP': 5.
                                                 aclv6L3RuleRateLimit 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.25 unsigned32 read-write
Rate limit for matched packet.
                                                 aclv6L3RuleReplaceDSCP 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.26 integer32 read-write
Replace DSCP for matched packet.
                                                 aclv6L3RuleReplace1P 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.27 integer32 read-write
Replace DSCP for matched packet.
                                                 aclv6L3RuleReplaceQueue 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.28 integer32 read-write
Acl IPV6 L3 Rule Replace Queue.
                                                 aclv6L3RuleFilterTimeRange 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.29 octet string read-only
ACL IPV6 L3 Filter Time Range
                                                 aclv6L3RulePortList 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.51 portlist read-write
Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable.
                                                 aclv6L3RuleVlanList 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.52 octet string read-write
Specifies the complete set of vlan over which if the packet arrives this filter rule will be applicable. Notice : only support one vlan.
                                                 aclv6L3RuleStatus 1.3.6.1.4.1.171.10.76.39.1.15.3.2.1.99 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                     aclPacketRule 1.3.6.1.4.1.171.10.76.39.1.15.4
                                         aclPacketRuleTable 1.3.6.1.4.1.171.10.76.39.1.15.4.1 no-access
A table to configure Packet Content filter rules in the system.
                                             aclPacketRuleEntry 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1 no-access
Each entry in this table is a Packet filter rule. Index to the table is the Packet filter number and Profile ID.
                                                 aclPacketAccessID 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.1 integer32 read-only
Packet Filter rule ID. 0 means auto assign.
                                                 aclPacketProfileID 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.2 integer32 read-only
ACL Profile ID which this rule join.
                                                 aclPacketRuleOffsetValue1 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.3 octet string read-write
The filter value of Offset 1.
                                                 aclPacketRuleOffsetValue2 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.4 octet string read-write
The filter value of Offset 2.
                                                 aclPacketRuleOffsetValue3 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.5 octet string read-write
The filter value of Offset 3.
                                                 aclPacketRuleOffsetValue4 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.6 octet string read-write
The filter value of Offset 4.
                                                 aclPacketRuleAction 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.8 integer read-write
Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding rules. If the action is 'drop', the packet will be discarded. Enumeration: 'replaceQueue': 7, 'replace1P': 6, 'drop': 2, 'rateLimit': 4, 'allow': 1, 'mirror': 3, 'replaceDSCP': 5.
                                                 aclPacketRuleRateLimit 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.9 unsigned32 read-write
Rate limit for matched packet.
                                                 aclPacketRuleReplaceDSCP 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.10 integer32 read-write
Replace DSCP for matched packet.
                                                 aclPacketRuleReplace1P 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.11 integer32 read-write
Replace 1p for matched packet.
                                                 aclPacketRuleReplaceQueue 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.12 integer32 read-write
Acl Rule Replace Queue.
                                                 aclPacketRuleFilterTimeRange 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.13 octet string read-only
Acl Filter Time Range
                                                 aclPacketRuleOffsetValue1Mask 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.14 octet string read-write
The filter Mask of Offset 1.
                                                 aclPacketRuleOffsetValue2Mask 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.15 octet string read-write
The filter Mask of Offset 2.
                                                 aclPacketRuleOffsetValue3Mask 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.16 octet string read-write
The filter Mask of Offset 3.
                                                 aclPacketRuleOffsetValue4Mask 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.17 octet string read-write
The filter Mask of Offset 4.
                                                 aclPacketRuleInPortList 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.51 portlist read-write
Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list.
                                                 aclPacketRuleInVlanList 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.52 octet string read-write
Specifies the complete set of vlan over which this filter is applied for packets ingress at vlan. Notice : Only support one vlan.
                                                 aclPacketRuleStatus 1.3.6.1.4.1.171.10.76.39.1.15.4.1.1.99 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                     aclFlowMeterRule 1.3.6.1.4.1.171.10.76.39.1.15.10
                                           aclFlowMeterTable 1.3.6.1.4.1.171.10.76.39.1.15.10.1 no-access
A table to configure L2 filter rules in the system.
                                               aclFlowMeterEntry 1.3.6.1.4.1.171.10.76.39.1.15.10.1.1 no-access
Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number and Profile ID.
                                                   aclFlowMeterProfileID 1.3.6.1.4.1.171.10.76.39.1.15.10.1.1.1 integer32 read-only
ACL Profile ID which this flow meter join.
                                                   aclFlowMeterAccessID 1.3.6.1.4.1.171.10.76.39.1.15.10.1.1.2 integer32 read-only
ACL Access ID which this flow meter join.
                                                   aclFlowMeterRate 1.3.6.1.4.1.171.10.76.39.1.15.10.1.1.3 integer32 read-write
The rate limiter of meter.
                                                   aclFlowMeterBurstSize 1.3.6.1.4.1.171.10.76.39.1.15.10.1.1.4 integer32 read-write
The burst size of meter.
                                                   aclFlowMeterReplaceDscp 1.3.6.1.4.1.171.10.76.39.1.15.10.1.1.5 integer32 read-write
Replace DSCP for matched out-band packets when aclFlowMeterAction is replace DSCP.
                                                   aclFlowMeterAction 1.3.6.1.4.1.171.10.76.39.1.15.10.1.1.6 integer read-write
Specifies the action to be taken on the out-band packet if the filter rule matches. If the action is 'drop', the packet will be discarded. Enumeration: 'replaceDSCP': 5, 'drop': 2.
                                                   aclFlowMeterStatus 1.3.6.1.4.1.171.10.76.39.1.15.10.1.1.99 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                               companySyslog 1.3.6.1.4.1.171.10.76.39.1.16
                                     syslogSettingGroup 1.3.6.1.4.1.171.10.76.39.1.16.1
                                         syslogEnable 1.3.6.1.4.1.171.10.76.39.1.16.1.1 integer read-write
This object is for enabling or disabling syslog alert features in the system and the syslog will save to flash or send to remote syslog server. System Logs record and manage events, as well as report errors and informational messages. Enumeration: 'disabled': 2, 'enable': 1.
                                         syslogSaveMode 1.3.6.1.4.1.171.10.76.39.1.16.1.2 integer read-write
This object is for choosing the method to save syslog into flash. Enumeration: 'timeInterval': 1, 'logTrigger': 2, 'onDemand': 0.
                                         syslogSaveMinutes 1.3.6.1.4.1.171.10.76.39.1.16.1.3 integer read-write
When savemode is time interval, it's used to set the interval minutes of system save syslog to flash.
                                     ipv4syslogServerGroup 1.3.6.1.4.1.171.10.76.39.1.16.2
                                         ipv4syslogServTable 1.3.6.1.4.1.171.10.76.39.1.16.2.1 no-access
The table of syslog remote server.
                                             ipv4syslogServEntry 1.3.6.1.4.1.171.10.76.39.1.16.2.1.1 no-access
The list of syslog remote server entry.
                                                 ipv4syslogServIndex 1.3.6.1.4.1.171.10.76.39.1.16.2.1.1.1 integer read-only
The index of syslog remote server.
                                                 ipv4syslogServAddr 1.3.6.1.4.1.171.10.76.39.1.16.2.1.1.2 ipaddress read-only
The IP Address of syslog remote server.
                                                 ipv4syslogServSeverity 1.3.6.1.4.1.171.10.76.39.1.16.2.1.1.3 integer read-only
Specifies the log level option to be set for a specific server. Enumeration: 'information': 6, 'all': 7, 'warning': 4.
                                                 ipv4syslogServFacility 1.3.6.1.4.1.171.10.76.39.1.16.2.1.1.4 integer read-only
The Syslog standard facilities. The facility to be used when sending Syslog messages to this server. Enumeration: 'local5': 168, 'local4': 160, 'local7': 184, 'local6': 176, 'local1': 136, 'local0': 128, 'local3': 152, 'local2': 144.
                                                 ipv4syslogServUDPport 1.3.6.1.4.1.171.10.76.39.1.16.2.1.1.5 integer read-only
The value is for setting UDP Port.
                                                 ipv4syslogServSrvStatus 1.3.6.1.4.1.171.10.76.39.1.16.2.1.1.6 integer read-only
The status for this server. If enable, system will send message to this server. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 ipv4syslogServSrvRowStatus 1.3.6.1.4.1.171.10.76.39.1.16.2.1.1.7 rowstatus read-write
Row status of this server entry.
                                     syslogServerGroup 1.3.6.1.4.1.171.10.76.39.1.16.3
                                         syslogServTable 1.3.6.1.4.1.171.10.76.39.1.16.3.1 no-access
The table of syslog remote server.
                                             syslogServEntry 1.3.6.1.4.1.171.10.76.39.1.16.3.1.1 no-access
The list of syslog remote server entry.
                                                 syslogServIndex 1.3.6.1.4.1.171.10.76.39.1.16.3.1.1.1 integer read-only
The index of syslog remote server.
                                                 syslogServAddrType 1.3.6.1.4.1.171.10.76.39.1.16.3.1.1.2 integer read-only
Specifies the Address type of server.Address type shall be ipv4 or ipv6. Enumeration: 'ipv4': 1, 'ipv6': 2.
                                                 syslogServAddr 1.3.6.1.4.1.171.10.76.39.1.16.3.1.1.3 ipv6address read-only
Specifies the ServerIP to which the syslog shall be forwarded.
                                                 syslogServInterfaceName 1.3.6.1.4.1.171.10.76.39.1.16.3.1.1.4 octet string read-only
Specifies the interface name when the syslogServInterfaceName is linklocal address.
                                                 syslogServSeverity 1.3.6.1.4.1.171.10.76.39.1.16.3.1.1.5 integer read-only
Specifies the log level option to be set for a specific server. Enumeration: 'information': 6, 'all': 7, 'warning': 4.
                                                 syslogServFacility 1.3.6.1.4.1.171.10.76.39.1.16.3.1.1.6 integer read-only
The Syslog standard facilities. The facility to be used when sending Syslog messages to this server. Enumeration: 'local5': 168, 'local4': 160, 'local7': 184, 'local6': 176, 'local1': 136, 'local0': 128, 'local3': 152, 'local2': 144.
                                                 syslogServUDPport 1.3.6.1.4.1.171.10.76.39.1.16.3.1.1.7 integer read-only
The value is for setting UDP Port.
                                                 syslogServSrvStatus 1.3.6.1.4.1.171.10.76.39.1.16.3.1.1.8 integer read-write
The status for this server. If enable, system will send message to this server. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 syslogServSrvRowStatus 1.3.6.1.4.1.171.10.76.39.1.16.3.1.1.9 rowstatus read-write
Row status of this server entry.
                               companyLBD 1.3.6.1.4.1.171.10.76.39.1.17
                                     sysLBDStateEnable 1.3.6.1.4.1.171.10.76.39.1.17.1 integer read-write
Enable/Disable Loopback detection function. The Loopback Detection function is used to detect the loop created by a specific port while Spanning Tree Protocol (STP) is not enabled in the network, especially when the down links are hubs or unmanaged switchs.The Switch will automatically shutdown the port and sends a log to the administrator. Enumeration: 'disabled': 2, 'enabled': 1.
                                     sysLBDMode 1.3.6.1.4.1.171.10.76.39.1.17.2 integer read-write
Loopback detection function mode. Enumeration: 'vlan': 2, 'port': 1.
                                     sysLBDInterval 1.3.6.1.4.1.171.10.76.39.1.17.3 integer32 read-write
Set a Loop detection Interval between 1 and 32767 seconds. The default is 2 seconds. This time interval to be used at counting time seconds to resend the CTP packet automatically.
                                     sysLBDRecoverTime 1.3.6.1.4.1.171.10.76.39.1.17.4 integer32 read-write
This time interval to be used at counting time seconds to recover the disabled port automatically. The Loop Detection Recover Time can be set at 0 seconds, or 60 to 1000000 seconds. Entering 0 will disable the Loop Detection Recover Time. The default is 60 seconds.
                                     sysLBDCtrlTable 1.3.6.1.4.1.171.10.76.39.1.17.5 no-access
A table to control Loopback detection features either for the entire switch or for each interface in the switch.
                                         sysLBDCtrlEntry 1.3.6.1.4.1.171.10.76.39.1.17.5.1 no-access
An entry appears in this table for each interface in the system.
                                             sysLBDCtrlIndex 1.3.6.1.4.1.171.10.76.39.1.17.5.1.1 integer32 read-only
The interface index of the port for which the configuration in this entry applies. For all machines give maximum port number.
                                             sysLBDPortStatus 1.3.6.1.4.1.171.10.76.39.1.17.5.1.2 integer read-write
Provides control to per port enable or disable the loopback detection function. Default is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                             sysLBDPortLoopStatus 1.3.6.1.4.1.171.10.76.39.1.17.5.1.3 integer read-only
The loop status for this port. Enumeration: 'loop': 2, 'normal': 1.
                                     sysLBDVlanLoopTable 1.3.6.1.4.1.171.10.76.39.1.17.6 no-access
A table to display Loopback detection features by vlan mode .
                                         sysLBDVlanLoopEntry 1.3.6.1.4.1.171.10.76.39.1.17.6.1 no-access
An entry appears in this table for each interface in the system.
                                             sysLBDVlanLoopIndex 1.3.6.1.4.1.171.10.76.39.1.17.6.1.1 integer32 read-only
Display port lists loop status by vlan.
                                             sysLBDVlanLoopPorts 1.3.6.1.4.1.171.10.76.39.1.17.6.1.2 portlist read-only
Display port lists loop status by vlan.
                               companyMirror 1.3.6.1.4.1.171.10.76.39.1.18
                                     sysMirrorStatus 1.3.6.1.4.1.171.10.76.39.1.18.1 integer read-write
Enable/Disable Port Mirroring function. Default is disabled. Port Mirroring is a method of monitoring network traffic that forwards a copy of each incoming and/or outgoing packet from one port of the Switch to another port where the packet can be studied. Enumeration: 'disabled': 2, 'enabled': 1.
                                     sysMirrorTargetPort 1.3.6.1.4.1.171.10.76.39.1.18.2 integer32 read-write
Specifies the port to which the mirrored traffic in the system is to be copied.
                                     sysMirrorCtrlIngressMirroring 1.3.6.1.4.1.171.10.76.39.1.18.3 portlist read-write
Provides control to enable or disable mirroring of ingress traffic over this interface to the mirrored-to port.
                                     sysMirrorCtrlEgressMirroring 1.3.6.1.4.1.171.10.76.39.1.18.4 portlist read-write
Provides control to enable or disable mirroring of egress traffic over this interface to the mirrored-to port.
                               companyStaticMcast 1.3.6.1.4.1.171.10.76.39.1.19
                                     staticMcastTable 1.3.6.1.4.1.171.10.76.39.1.19.1 no-access
A list of the Static MACs
                                         staticMcastEntry 1.3.6.1.4.1.171.10.76.39.1.19.1.1 no-access
A Static MAC entry containing the mac and forwarding port.
                                             staticMcastVlanID 1.3.6.1.4.1.171.10.76.39.1.19.1.1.1 integer read-only
The VLAN ID of the static MAC entry.
                                             staticMcastMac 1.3.6.1.4.1.171.10.76.39.1.19.1.1.2 macaddress read-only
The MAC address associated of the static MAC entry.
                                             staticMcastEgressPorts 1.3.6.1.4.1.171.10.76.39.1.19.1.1.3 portlist read-only
The set of ports to which frames received from a specific port and destined for a specific Multicast or Broadcast MAC address must be forwarded, regardless of any dynamic information e.g. from GMRP. A port may not be added in this set if it is already a member of the set of ports in dot1qStaticMulticastForbiddenEgressPorts. The default value of this object is a string of ones of appropriate length.
                                             staticMcastIpAddr 1.3.6.1.4.1.171.10.76.39.1.19.1.1.4 ipaddress read-only
Static Multicast IP Address.
                                             staticMcastStatus 1.3.6.1.4.1.171.10.76.39.1.19.1.1.5 rowstatus read-write
The status of an entry in the Static Mcast Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
                               companySNTPSetting 1.3.6.1.4.1.171.10.76.39.1.20
                                     ipv4sysSNTPTimeSeconds 1.3.6.1.4.1.171.10.76.39.1.20.1 integer32 read-write
This object is for setting the system time in seconds from Epoch (00:00:00 UTC, January 1, 2009). Notice : input value must larger than 1230768000 (00:00:00 UTC, January 1, 2009) and smaller than 2145916799 (23:59:59 UTC, December 31, 2037).
                                     ipv4sysSNTPFirstServer 1.3.6.1.4.1.171.10.76.39.1.20.2 ipaddress read-write
SNTP First Server's IP Address
                                     ipv4sysSNTPSecondServer 1.3.6.1.4.1.171.10.76.39.1.20.3 ipaddress read-write
SNTP Second Server's IP Address
                                     ipv4sysSNTPPollInterval 1.3.6.1.4.1.171.10.76.39.1.20.4 integer32 read-write
SNTP Poll Interval In Seconds (30-99999)
                                     ipv4sysSNTPState 1.3.6.1.4.1.171.10.76.39.1.20.5 integer read-write
Enable/Disable SNTP function in the system. Enumeration: 'local': 2, 'sntp': 1.
                                     ipv4sysSNTPDSTOffset 1.3.6.1.4.1.171.10.76.39.1.20.6 integer read-write
This object is for Daylight Saving Time Offset In (30/60/90/120) Minutes. Enumeration: 'offset90min': 90, 'offset120min': 120, 'offset60min': 60, 'offset30min': 30.
                                     ipv4sysSNTPGMTMinutes 1.3.6.1.4.1.171.10.76.39.1.20.7 integer read-write
Specifies the Time Zone Offset from GMT in +/- Minutes. (+780 ~ -720)
                                     ipv4sysSNTPDSTStartMon 1.3.6.1.4.1.171.10.76.39.1.20.8 integer read-write
The start month of Daylight Saving Time.
                                     ipv4sysSNTPDSTStartDay 1.3.6.1.4.1.171.10.76.39.1.20.9 integer read-write
The start day of Daylight Saving Time.
                                     ipv4sysSNTPDSTStartHour 1.3.6.1.4.1.171.10.76.39.1.20.10 integer read-write
The start hour of Daylight Saving Time.
                                     ipv4sysSNTPDSTStartMin 1.3.6.1.4.1.171.10.76.39.1.20.11 integer read-write
The start minute of Daylight Saving Time.
                                     ipv4sysSNTPDSTEndMon 1.3.6.1.4.1.171.10.76.39.1.20.12 integer read-write
The end month of Daylight Saving Time.
                                     ipv4sysSNTPDSTEndDay 1.3.6.1.4.1.171.10.76.39.1.20.13 integer read-write
The end day of Daylight Saving Time.
                                     ipv4sysSNTPDSTEndHour 1.3.6.1.4.1.171.10.76.39.1.20.14 integer read-write
The end hour of Daylight Saving Time.
                                     ipv4sysSNTPDSTEndMin 1.3.6.1.4.1.171.10.76.39.1.20.15 integer read-write
The end minute of Daylight Saving Time.
                                     ipv4sysSNTPDSTState 1.3.6.1.4.1.171.10.76.39.1.20.16 integer read-write
This object is for Annual(1) or Disabled(2) DST state in the system. Enumeration: 'disabled': 2, 'annual': 1.
                                     sysSNTPServerTable 1.3.6.1.4.1.171.10.76.39.1.20.17
                                           sysSNTPTimeSeconds 1.3.6.1.4.1.171.10.76.39.1.20.17.1 integer32 read-write
This object is for setting the system time in seconds from Epoch (00:00:00 UTC, January 1, 2009). Notice : input value must larger than 1230768000 (00:00:00 UTC, January 1, 2009) and smaller than 2145916799 (23:59:59 UTC, December 31, 2037).
                                           sysSNTPFirstServer 1.3.6.1.4.1.171.10.76.39.1.20.17.2 ipv6address read-write
SNTP First Server's IPv6 Address
                                           sysSNTPFirstType 1.3.6.1.4.1.171.10.76.39.1.20.17.3 integer read-write
SNTP First Server's IPv6 Address type. Enumeration: 'iPv4': 1, 'iPv6': 2.
                                           sysSNTPFirstInterfaceName 1.3.6.1.4.1.171.10.76.39.1.20.17.4 octet string read-write
Specifies the interface name when the sysSNTPFirstServer is linklocal address.
                                           sysSNTPSecondServer 1.3.6.1.4.1.171.10.76.39.1.20.17.5 ipv6address read-write
SNTP Second Server's IPv6 Address
                                           sysSNTPSecondType 1.3.6.1.4.1.171.10.76.39.1.20.17.6 integer read-write
SNTP First Server's IPv6 Address type. Enumeration: 'iPv4': 1, 'iPv6': 2.
                                           sysSNTPSecondInterfaceName 1.3.6.1.4.1.171.10.76.39.1.20.17.7 octet string read-write
Specifies the interface name when the sysSNTPSecondServer is linklocal address.
                                           sysSNTPPollInterval 1.3.6.1.4.1.171.10.76.39.1.20.17.8 integer32 read-write
SNTP Poll Interval In Seconds (30-99999)
                                           sysSNTPState 1.3.6.1.4.1.171.10.76.39.1.20.17.9 integer read-write
Enable/Disable SNTP function in the system. Enumeration: 'local': 2, 'sntp': 1.
                                           sysSNTPDSTOffset 1.3.6.1.4.1.171.10.76.39.1.20.17.10 integer read-write
This object is for Daylight Saving Time Offset In (30/60/90/120) Minutes. Enumeration: 'offset90min': 90, 'offset120min': 120, 'offset60min': 60, 'offset30min': 30.
                                           sysSNTPGMTMinutes 1.3.6.1.4.1.171.10.76.39.1.20.17.11 integer read-write
Specifies the Time Zone Offset from GMT in +/- Minutes. (+780 ~ -720)
                                           sysSNTPDSTStartMon 1.3.6.1.4.1.171.10.76.39.1.20.17.12 integer read-write
The start month of Daylight Saving Time.
                                           sysSNTPDSTStartDay 1.3.6.1.4.1.171.10.76.39.1.20.17.13 integer read-write
The start day of Daylight Saving Time.
                                           sysSNTPDSTStartHour 1.3.6.1.4.1.171.10.76.39.1.20.17.14 integer read-write
The start hour of Daylight Saving Time.
                                           sysSNTPDSTStartMin 1.3.6.1.4.1.171.10.76.39.1.20.17.15 integer read-write
The start minute of Daylight Saving Time.
                                           sysSNTPDSTEndMon 1.3.6.1.4.1.171.10.76.39.1.20.17.16 integer read-write
The end month of Daylight Saving Time.
                                           sysSNTPDSTEndDay 1.3.6.1.4.1.171.10.76.39.1.20.17.17 integer read-write
The end day of Daylight Saving Time.
                                           sysSNTPDSTEndHour 1.3.6.1.4.1.171.10.76.39.1.20.17.18 integer read-write
The end hour of Daylight Saving Time.
                                           sysSNTPDSTEndMin 1.3.6.1.4.1.171.10.76.39.1.20.17.19 integer read-write
The end minute of Daylight Saving Time.
                                           sysSNTPDSTState 1.3.6.1.4.1.171.10.76.39.1.20.17.20 integer read-write
This object is for Enabled(1) or Disabled(2) DST state in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                           sysSNTPDSTMethod 1.3.6.1.4.1.171.10.76.39.1.20.17.30 integer read-write
This object is for Annual(1) or Repeating(2) DST method in the system. Enumeration: 'repeating': 2, 'annual': 1.
                                           sysSNTPDSTRepeatStartMon 1.3.6.1.4.1.171.10.76.39.1.20.17.31 integer read-write
The start month of Daylight Saving Time in Repeating mode.
                                           sysSNTPDSTRepeatStartWeek 1.3.6.1.4.1.171.10.76.39.1.20.17.32 integer read-write
The start week of Daylight Saving Time in Repeating mode. Enumeration: 'last': 0, 'third': 3, 'second': 2, 'fourth': 4, 'fifth': 5, 'first': 1.
                                           sysSNTPDSTRepeatStartWeekDay 1.3.6.1.4.1.171.10.76.39.1.20.17.33 integer read-write
The start weekday of Daylight Saving Time in Repeating mode. Enumeration: 'wed': 3, 'sun': 0, 'th': 4, 'tue': 2, 'mon': 1, 'fri': 5, 'sat': 6.
                                           sysSNTPDSTRepeatStartHour 1.3.6.1.4.1.171.10.76.39.1.20.17.34 integer read-write
The start hour of Daylight Saving Time in Repeating mode..
                                           sysSNTPDSTRepeatStartMin 1.3.6.1.4.1.171.10.76.39.1.20.17.35 integer read-write
The start minute of Daylight Saving Time in Repeating mode.
                                           sysSNTPDSTRepeatEndMon 1.3.6.1.4.1.171.10.76.39.1.20.17.36 integer read-write
The end month of Daylight Saving Time in Repeating mode.
                                           sysSNTPDSTRepeatEndWeek 1.3.6.1.4.1.171.10.76.39.1.20.17.37 integer read-write
The end week of Daylight Saving Time in Repeating mode. Enumeration: 'last': 0, 'third': 3, 'second': 2, 'fourth': 4, 'fifth': 5, 'first': 1.
                                           sysSNTPDSTRepeatEndWeekDay 1.3.6.1.4.1.171.10.76.39.1.20.17.38 integer read-write
The end weekday of Daylight Saving Time in Repeating mode. Enumeration: 'wed': 3, 'sun': 0, 'th': 4, 'tue': 2, 'mon': 1, 'fri': 5, 'sat': 6.
                                           sysSNTPDSTRepeatEndHour 1.3.6.1.4.1.171.10.76.39.1.20.17.39 integer read-write
The end hour of Daylight Saving Time in Repeating mode..
                                           sysSNTPDSTRepeatEndMin 1.3.6.1.4.1.171.10.76.39.1.20.17.40 integer read-write
The end minute of Daylight Saving Time in Repeating mode.
                               companyRMON 1.3.6.1.4.1.171.10.76.39.1.22
                                     rmonGlobalState 1.3.6.1.4.1.171.10.76.39.1.22.1 integer read-write
This object is for enabling or disabling RMON function. Enumeration: 'disabled': 2, 'enabled': 1.
                                     rmonStatistics 1.3.6.1.4.1.171.10.76.39.1.22.2
                                         rmonStatsTable 1.3.6.1.4.1.171.10.76.39.1.22.2.1 no-access
A list of Ethernet statistics entries.
                                             rmonStatsEntry 1.3.6.1.4.1.171.10.76.39.1.22.2.1.1 no-access
A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named etherStatsPkts.1
                                                 rmonStatsIndex 1.3.6.1.4.1.171.10.76.39.1.22.2.1.1.1 integer32 read-only
The value of this object uniquely identifies this etherStats entry.
                                                 rmonStatsDataSource 1.3.6.1.4.1.171.10.76.39.1.22.2.1.1.2 object identifier read-only
This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated etherStatsStatus object is equal to valid(1).
                                                 rmonStatsOwner 1.3.6.1.4.1.171.10.76.39.1.22.2.1.1.3 ownerstring read-only
The entity that configured this entry and is therefore using the resources assigned to it.
                                                 rmonStatsStatus 1.3.6.1.4.1.171.10.76.39.1.22.2.1.1.4 rmonstatus read-only
The status of this etherStats entry.
                                     rmonHistory 1.3.6.1.4.1.171.10.76.39.1.22.3
                                         rmonHistoryTable 1.3.6.1.4.1.171.10.76.39.1.22.3.1 no-access
A list of history control entries.
                                             rmonHistoryEntry 1.3.6.1.4.1.171.10.76.39.1.22.3.1.1 no-access
A list of parameters that set up a periodic sampling of statistics. As an example, an instance of the historyControlInterval object might be named historyControlInterval.2
                                                 rmonHistoryIndex 1.3.6.1.4.1.171.10.76.39.1.22.3.1.1.1 integer32 read-only
An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on the device.
                                                 rmonHistoryDataSource 1.3.6.1.4.1.171.10.76.39.1.22.3.1.1.2 object identifier read-only
This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in RFC 2233 [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all packets on the local network segment attached to the identified interface. An agent may or may not be able to tell if fundamental changes to the media of the interface have occurred and necessitate an invalidation of this entry. For example, a hot-pluggable ethernet card could be pulled out and replaced by a token-ring card. In such a case, if the agent has such knowledge of the change, it is recommended that it invalidate this entry. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
                                                 rmonHistoryBucketsRequested 1.3.6.1.4.1.171.10.76.39.1.22.3.1.1.3 integer32 read-only
The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControlEntry. When this object is created or modified, the probe should set historyControlBucketsGranted as closely to this object as is possible for the particular probe implementation and available resources.
                                                 rmonHistoryInterval 1.3.6.1.4.1.171.10.76.39.1.22.3.1.1.4 integer32 read-only
The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControlEntry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters in a bucket may overflow at their maximum value with no indication, a prudent manager will take into account the possibility of overflow in any of the associated counters. It is important to consider the minimum time in which any counter could overflow on a particular media type and set the historyControlInterval object to a value less than this interval. This is typically most important for the 'octets' counter in any media-specific table. For example, on an Ethernet network, the etherHistoryOctets counter could overflow in about one hour at the Ethernet's maximum utilization. This object may not be modified if the associated historyControlStatus object is equal to valid(1).
                                                 rmonHistoryOwner 1.3.6.1.4.1.171.10.76.39.1.22.3.1.1.5 ownerstring read-only
The entity that configured this entry and is therefore using the resources assigned to it.
                                                 rmonHistoryStatus 1.3.6.1.4.1.171.10.76.39.1.22.3.1.1.6 rmonstatus read-only
The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if this historyControlEntry is not equal to valid(1).
                                     rmonAlarm 1.3.6.1.4.1.171.10.76.39.1.22.4
                                         rmonAlarmTable 1.3.6.1.4.1.171.10.76.39.1.22.4.1 no-access
A list of alarm entries.
                                             rmonAlarmEntry 1.3.6.1.4.1.171.10.76.39.1.22.4.1.1 no-access
A list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8
                                                 rmonAlarmIndex 1.3.6.1.4.1.171.10.76.39.1.22.4.1.1.1 integer32 read-only
An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
                                                 rmonAlarmInterval 1.3.6.1.4.1.171.10.76.39.1.22.4.1.1.2 integer32 read-only
The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval. This object may not be modified if the associated alarmStatus object is equal to valid(1).
                                                 rmonAlarmVariable 1.3.6.1.4.1.171.10.76.39.1.22.4.1.1.3 object identifier read-only
The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter32, Counter64, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the contents of MIB views, no access control mechanism exists that can restrict the value of this object to identify only those objects that exist in a particular MIB view. Because there is thus no acceptable means of restricting the read access that could be obtained through the alarm mechanism, the probe must only grant write access to this object in those views that have read access to all objects on the probe. During a set operation, if the supplied variable name is not available in the selected MIB view, a badValue error must be returned. If at any time the variable name of an established alarmEntry is no longer available in the selected MIB view, the probe must change the status of this alarmEntry to invalid(4). This object may not be modified if the associated alarmStatus object is equal to valid(1).
                                                 rmonAlarmSampleType 1.3.6.1.4.1.171.10.76.39.1.22.4.1.1.4 integer read-only
The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds. This object may not be modified if the associated alarmStatus object is equal to valid(1). Enumeration: 'absoluteValue': 1, 'deltaValue': 2.
                                                 rmonAlarmRisingThreshold 1.3.6.1.4.1.171.10.76.39.1.22.4.1.1.5 integer32 read-only
A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the alarmFallingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
                                                 rmonAlarmFallingThreshold 1.3.6.1.4.1.171.10.76.39.1.22.4.1.1.6 integer32 read-only
A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the alarmRisingThreshold. This object may not be modified if the associated alarmStatus object is equal to valid(1).
                                                 rmonAlarmRisingEventIndex 1.3.6.1.4.1.171.10.76.39.1.22.4.1.1.7 integer32 read-only
The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
                                                 rmonAlarmFallingEventIndex 1.3.6.1.4.1.171.10.76.39.1.22.4.1.1.8 integer32 read-only
The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the eventTable, then no association exists. In particular, if this value is zero, no associated event will be generated, as zero is not a valid event index. This object may not be modified if the associated alarmStatus object is equal to valid(1).
                                                 rmonAlarmOwner 1.3.6.1.4.1.171.10.76.39.1.22.4.1.1.9 ownerstring read-only
The entity that configured this entry and is therefore using the resources assigned to it.
                                                 rmonAlarmStatus 1.3.6.1.4.1.171.10.76.39.1.22.4.1.1.10 rmonstatus read-only
The status of this alarm entry.
                                     rmonEvent 1.3.6.1.4.1.171.10.76.39.1.22.5
                                         rmonEventTable 1.3.6.1.4.1.171.10.76.39.1.22.5.1 no-access
A list of events to be generated.
                                             rmonEventEntry 1.3.6.1.4.1.171.10.76.39.1.22.5.1.1 no-access
A set of parameters that describe an event to be generated when certain conditions are met. As an example, an instance of the eventLastTimeSent object might be named eventLastTimeSent.6
                                                 rmonEventIndex 1.3.6.1.4.1.171.10.76.39.1.22.5.1.1.1 integer32 read-only
An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur.
                                                 rmonEventDescription 1.3.6.1.4.1.171.10.76.39.1.22.5.1.1.2 displaystring read-only
A comment describing this event entry.
                                                 rmonEventType 1.3.6.1.4.1.171.10.76.39.1.22.5.1.1.3 integer read-only
The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations. Enumeration: 'snmptrap': 3, 'none': 1, 'log': 2, 'logandtrap': 4.
                                                 rmonEventCommunity 1.3.6.1.4.1.171.10.76.39.1.22.5.1.1.4 octet string read-only
If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string.
                                                 rmonEventOwner 1.3.6.1.4.1.171.10.76.39.1.22.5.1.1.5 ownerstring read-only
The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations should retrieve those log entries, as they may have significance to all management stations connected to this device
                                                 rmonEventStatus 1.3.6.1.4.1.171.10.76.39.1.22.5.1.1.6 rmonstatus read-only
The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent.
                               companyAuthGroup 1.3.6.1.4.1.171.10.76.39.1.23
                                     swAuthenCtrl 1.3.6.1.4.1.171.10.76.39.1.23.1
                                         swAuthStatus 1.3.6.1.4.1.171.10.76.39.1.23.1.1 integer read-write
Enable/Disable Static 802.1x. Enumeration: 'disabled': 2, 'enabled': 1.
                                         swAuthMode 1.3.6.1.4.1.171.10.76.39.1.23.1.2 integer read-write
This object indicates the authentication mode of the device. Enumeration: 'portBase': 1, 'macBase': 2.
                                         authProtocol 1.3.6.1.4.1.171.10.76.39.1.23.1.3 integer read-write
The authentication method used to authenticate users. Enumeration: 'authProtocolRadiusEap': 1, 'authProtocolLocal': 2.
                                         swAuthCtrlPktFwdMode 1.3.6.1.4.1.171.10.76.39.1.23.1.4 integer read-write
When 802.1x disable, this item can decided eap packet be forward or drop. Enumeration: 'authDropEap': 2, 'authForwardEap': 1.
                                     swAuthPortAccessCtrl 1.3.6.1.4.1.171.10.76.39.1.23.2
                                         swAuthPortAccessControlTable 1.3.6.1.4.1.171.10.76.39.1.23.2.1 no-access
A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself.
                                             swAuthPortAccessControlEntry 1.3.6.1.4.1.171.10.76.39.1.23.2.1.1 no-access
The configuration information for an Authenticator Port.
                                                 swAuthAuthConfigPortNumber 1.3.6.1.4.1.171.10.76.39.1.23.2.1.1.1 integer read-only
A unique value for each port that correlates to port index. Its value ranges between 1 and the value of port number. For all machines give maximum port number.
                                                 swAuthAuthQuietPeriod 1.3.6.1.4.1.171.10.76.39.1.23.2.1.1.2 integer read-write
The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine.
                                                 swAuthAuthSuppTimeout 1.3.6.1.4.1.171.10.76.39.1.23.2.1.1.3 integer read-write
The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine.
                                                 swAuthAuthServerTimeout 1.3.6.1.4.1.171.10.76.39.1.23.2.1.1.4 integer read-write
The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine.
                                                 swAuthAuthMaxReq 1.3.6.1.4.1.171.10.76.39.1.23.2.1.1.5 integer read-write
The value of the maxReq constant currently in use by the Backend Authentication state machine.
                                                 swAuthAuthTxPeriod 1.3.6.1.4.1.171.10.76.39.1.23.2.1.1.6 integer read-write
The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine.
                                                 swAuthAuthReAuthPeriod 1.3.6.1.4.1.171.10.76.39.1.23.2.1.1.7 integer read-write
The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine.
                                                 swAuthAuthReAuthentication 1.3.6.1.4.1.171.10.76.39.1.23.2.1.1.8 integer read-write
The enable/disable control used by the Reauthentication Timer state machine (8.5.5.1). Enumeration: 'disabled': 2, 'enabled': 1.
                                                 swAuthAuthConfigPortControl 1.3.6.1.4.1.171.10.76.39.1.23.2.1.1.9 integer read-write
The current value of the controlled Port control parameter for the Port. Enumeration: 'auto': 2, 'forceUnauthorized': 1, 'forceAuthorized': 3.
                                                 swAuthAuthCapability 1.3.6.1.4.1.171.10.76.39.1.23.2.1.1.10 integer read-write
The current value of the controlled Port control parameter for the Port. Enumeration: 'authenticator': 1, 'none': 2.
                                                 swAuthAuthDirection 1.3.6.1.4.1.171.10.76.39.1.23.2.1.1.11 integer read-write
The current value of the controlled Port control parameter for the Port. Enumeration: 'both': 0, 'in': 1.
                                     swAuthUser 1.3.6.1.4.1.171.10.76.39.1.23.3
                                         swAuthUserTable 1.3.6.1.4.1.171.10.76.39.1.23.3.1 no-access
A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself.
                                             swAuthUserEntry 1.3.6.1.4.1.171.10.76.39.1.23.3.1.1 no-access
The configuration information for an Authenticator Port.
                                                 swAuthUserName 1.3.6.1.4.1.171.10.76.39.1.23.3.1.1.1 snmpadminstring read-only
The unique index value of a row in this table. This object is used to set 802.1X Local user name, The following characters are allowed to input: semicolon, question mark, space, and double quotation mark.
                                                 swAuthUserPassword 1.3.6.1.4.1.171.10.76.39.1.23.3.1.1.2 displaystring read-write
This object is used to set 802.1X Local user Password, The following characters are allowed to input: semicolon, question mark, space, and double quotation mark.
                                                 swAuthUserStatus 1.3.6.1.4.1.171.10.76.39.1.23.3.1.1.3 rowstatus read-only
The status of this conceptual row in the swAuthUserTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The swAuthUserName objects must be explicitly set.
                                     swAuthRadiusServer 1.3.6.1.4.1.171.10.76.39.1.23.4
                                         iPv4swAuthRadiusServerTable 1.3.6.1.4.1.171.10.76.39.1.23.4.1 no-access
A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself.
                                             iPv4swAuthRadiusServerEntry 1.3.6.1.4.1.171.10.76.39.1.23.4.1.1 no-access
The configuration information for an Authenticator Port.
                                                 iPv4swAuthRadiusServerIndex 1.3.6.1.4.1.171.10.76.39.1.23.4.1.1.1 integer read-only
A unique value for Authentication RADIUS Server index. Its value ranges between 1 and 3.
                                                 iPv4swAuthRadiusServerAddress 1.3.6.1.4.1.171.10.76.39.1.23.4.1.1.2 ipaddress read-write
The IP address of the RADIUS server referred to in this table entry.
                                                 iPv4swAuthRadiusServerAuthenticationPort 1.3.6.1.4.1.171.10.76.39.1.23.4.1.1.3 integer read-write
The value is for setting UDP Port.
                                                 iPv4swAuthRadiusServerAccountingPort 1.3.6.1.4.1.171.10.76.39.1.23.4.1.1.4 integer read-write
The value is for setting UDP Port.
                                                 iPv4swAuthRadiusServerTimeout 1.3.6.1.4.1.171.10.76.39.1.23.4.1.1.5 integer read-write
The value is for setting UDP Port.
                                                 iPv4swAuthRadiusServerRetransmit 1.3.6.1.4.1.171.10.76.39.1.23.4.1.1.6 integer read-write
The value is for setting UDP Port.
                                                 iPv4swAuthRadiusServerKey 1.3.6.1.4.1.171.10.76.39.1.23.4.1.1.7 displaystring read-write
This object is used to set 802.1X Radius Server Key, The following characters are allowed to input: semicolon, question mark, space, and double quotation mark.
                                                 iPv4swAuthRadiusServerStatus 1.3.6.1.4.1.171.10.76.39.1.23.4.1.1.8 rowstatus read-only
The status of this conceptual row in the swAuthRadiusServerTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The swAuthRadiusServerIndex objects must be explicitly set.
                                         swAuthRadiusServerTable 1.3.6.1.4.1.171.10.76.39.1.23.4.2 no-access
A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself.
                                             swAuthRadiusServerEntry 1.3.6.1.4.1.171.10.76.39.1.23.4.2.1 no-access
The configuration information for an Authenticator Port.
                                                 swAuthRadiusServerIndex 1.3.6.1.4.1.171.10.76.39.1.23.4.2.1.1 integer read-only
A unique value for Authentication RADIUS Server index. Its value ranges between 1 and 3.
                                                 swAuthRadiusIPType 1.3.6.1.4.1.171.10.76.39.1.23.4.2.1.2 integer read-write
The IP address of the RADIUS server IP type referred to in this table entry.
                                                 swAuthRadiusServerAddress 1.3.6.1.4.1.171.10.76.39.1.23.4.2.1.3 ipv6address read-write
The IP address of the RADIUS server referred to in this table entry.
                                                 swAuthRadiusServerInterfaceName 1.3.6.1.4.1.171.10.76.39.1.23.4.2.1.4 octet string read-only
Specifies the interface name when the swAuthRadiusServerAddress is linklocal address.
                                                 swAuthRadiusServerAuthenticationPort 1.3.6.1.4.1.171.10.76.39.1.23.4.2.1.5 integer read-write
The value is for setting UDP Port.
                                                 swAuthRadiusServerAccountingPort 1.3.6.1.4.1.171.10.76.39.1.23.4.2.1.6 integer read-write
The value is for setting UDP Port.
                                                 swAuthRadiusServerTimeout 1.3.6.1.4.1.171.10.76.39.1.23.4.2.1.7 integer read-write
The value is for setting UDP Port.
                                                 swAuthRadiusServerRetransmit 1.3.6.1.4.1.171.10.76.39.1.23.4.2.1.8 integer read-write
The value is for setting UDP Port.
                                                 swAuthRadiusServerKey 1.3.6.1.4.1.171.10.76.39.1.23.4.2.1.9 displaystring read-write
This object is used to set 802.1X Radius Server Key, The following characters are allowed to input: semicolon, question mark, space, and double quotation mark.
                                                 swAuthRadiusServerStatus 1.3.6.1.4.1.171.10.76.39.1.23.4.2.1.10 rowstatus read-only
The status of this conceptual row in the swAuthRadiusServerTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The swAuthRadiusServerIndex objects must be explicitly set.
                               companyGuestVlan 1.3.6.1.4.1.171.10.76.39.1.24
                                     guestVlanName 1.3.6.1.4.1.171.10.76.39.1.24.1 displaystring read-write
The VLAN name of guest VLAN.
                                     guestVlanPort 1.3.6.1.4.1.171.10.76.39.1.24.2 portlist read-write
This object indicates the guest VLAN port members of this device.
                                     guestVlanDelState 1.3.6.1.4.1.171.10.76.39.1.24.3 integer read-write
Used to delete the guest VLAN. Enumeration: 'start': 2, 'none': 1.
                               companyMacNotify 1.3.6.1.4.1.171.10.76.39.1.25
                                     macNotifyState 1.3.6.1.4.1.171.10.76.39.1.25.1 integer read-write
This object can enabled or disabled MAC Notification. Enumeration: 'disabled': 2, 'enabled': 1.
                                     macNotifyInterval 1.3.6.1.4.1.171.10.76.39.1.25.2 integer read-write
This object indicates the time interval in second for trigger the MAC notify message.
                                     macNotifyHistorySize 1.3.6.1.4.1.171.10.76.39.1.25.3 integer read-write
This object indicates the history size of variation MAC in address table. The default value is 1 .
                                     macNotifyCtrlTable 1.3.6.1.4.1.171.10.76.39.1.25.4 no-access
A table to control Loopback detection features either for the entire switch or for each interface in the switch.
                                         macNotifyCtrlEntry 1.3.6.1.4.1.171.10.76.39.1.25.4.1 no-access
An entry appears in this table for each interface in the system.
                                             macNotifyCtrlIndex 1.3.6.1.4.1.171.10.76.39.1.25.4.1.1 integer32 read-only
The interface index of the port for which the configuration in this entry applies. For all machines give maximum port number.
                                             macNotifyPortStatus 1.3.6.1.4.1.171.10.76.39.1.25.4.1.2 integer read-write
Provides control to per port enable or disable the loopback detection function. Default is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                     macNotifyInfo 1.3.6.1.4.1.171.10.76.39.1.25.5
                                         macNotifyInfoDiscription 1.3.6.1.4.1.171.10.76.39.1.25.5.1 octet string no-access
This object indicates the information for the device MAC address changes. And the detailed information include: Operation Code + MAC address + Box ID + Port Number + Zero... Operation Code: 1, 2 and 3 1 means learned a new MAC address 2 means deleted an old MAC address. 3 means station movement. Box ID: The switch box ID, for standalone device, it always 1. Port Number: The port number learned or deleted for the box. Zero: Used to separate each message (Operate Code + MAC address + Box ID + Port Number).
                               companyISMVLAN 1.3.6.1.4.1.171.10.76.39.1.27
                                     igmpMulticastVlanStatus 1.3.6.1.4.1.171.10.76.39.1.27.1 integer read-write
Enable/Disable IGMP Multicast Vlan function. Enumeration: 'disabled': 2, 'enabled': 1.
                                     igmpMulticastVlanTable 1.3.6.1.4.1.171.10.76.39.1.27.2 no-access
Information about the IGMP snooping multicast VLAN table.
                                         igmpMulticastVlanEntry 1.3.6.1.4.1.171.10.76.39.1.27.2.1 no-access
The entry of igmpMulticastVlanTable.
                                             igmpMulticastVlanid 1.3.6.1.4.1.171.10.76.39.1.27.2.1.1 integer read-only
This object indicates the VLAN ID of the IGMP snooping multicast VLAN entry.
                                             igmpMulticastVlanName 1.3.6.1.4.1.171.10.76.39.1.27.2.1.2 displaystring read-only
This object indicates the VLAN name of the IGMP snooping multicast VLAN entry.
                                             igmpMulticastVlanSourcePort 1.3.6.1.4.1.171.10.76.39.1.27.2.1.3 portlist read-write
This object indicates the port list of the source ports of the IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from the member ports will be forwarded to the source ports.
                                             igmpMulticastVlanMemberPort 1.3.6.1.4.1.171.10.76.39.1.27.2.1.4 portlist read-write
This object indicates the port list of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry and the IGMP control messages received from the member ports will be forwarded to the source ports.
                                             igmpMulticastVlanTagMemberPort 1.3.6.1.4.1.171.10.76.39.1.27.2.1.5 portlist read-write
This object indicates the port list of the tag member ports of the IGMP snooping multicast VLAN.
                                             igmpMulticastVlanUntaggedSourcePort 1.3.6.1.4.1.171.10.76.39.1.27.2.1.6 portlist read-write
This object indicates the port list of the untag source ports of the IGMP snooping multicast VLAN.
                                             igmpMulticastVlanState 1.3.6.1.4.1.171.10.76.39.1.27.2.1.7 integer read-write
This object can be used to enable or disable the IGMP snooping multicast VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                                             igmpMulticastVlanReplaceSourceIp 1.3.6.1.4.1.171.10.76.39.1.27.2.1.8 ipaddress read-write
The replacement source IP of this multicast VLAN.
                                             igmpMulticastVlanRemapPriority 1.3.6.1.4.1.171.10.76.39.1.27.2.1.9 integer read-write
The remap priority of this multicast VLAN.
                                             igmpMulticastVlanReplacePriority 1.3.6.1.4.1.171.10.76.39.1.27.2.1.10 integer read-write
The replacement priority of this multicast VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                                             igmpMulticastVlanRowStatus 1.3.6.1.4.1.171.10.76.39.1.27.2.1.11 rowstatus read-only
This object indicates the status of this entry.
                                     igmpMulticastVlanGroupTable 1.3.6.1.4.1.171.10.76.39.1.27.3 no-access
The table containing the IGMP snooping multicast VLAN group information
                                         igmpMulticastVlanGroupEntry 1.3.6.1.4.1.171.10.76.39.1.27.3.1 no-access
Information about the current IGMP snooping multicast VLAN group.
                                             igmpMulticastVlanGroupVid 1.3.6.1.4.1.171.10.76.39.1.27.3.1.1 integer read-only
This object indicates the VID of the IGMP snooping multicast VLAN group.
                                             igmpMulticastVlanGroupFromIp 1.3.6.1.4.1.171.10.76.39.1.27.3.1.2 ipaddress read-only
Specifies the multicast address list for this VLAN.
                                             igmpMulticastVlanGroupToIp 1.3.6.1.4.1.171.10.76.39.1.27.3.1.3 ipaddress read-only
Specifies the multicast address list for this VLAN.
                                             igmpMulticastVlanGroupStatus 1.3.6.1.4.1.171.10.76.39.1.27.3.1.4 rowstatus read-only
This object indicates the status of this entry.
                                     multicastVlanTable 1.3.6.1.4.1.171.10.76.39.1.27.4 no-access
Information about the IGMP/MLD snooping multicast VLAN table.
                                         multicastVlanEntry 1.3.6.1.4.1.171.10.76.39.1.27.4.1 no-access
The entry of multicastVlanTable.
                                             multicastVlanid 1.3.6.1.4.1.171.10.76.39.1.27.4.1.1 integer read-only
This object indicates the VLAN ID of the IGMP/MLD snooping multicast VLAN entry.
                                             multicastVlanName 1.3.6.1.4.1.171.10.76.39.1.27.4.1.2 displaystring read-only
This object indicates the VLAN name of the IGMP/MLD snooping multicast VLAN entry.
                                             multicastVlanSourcePort 1.3.6.1.4.1.171.10.76.39.1.27.4.1.3 portlist read-write
This object indicates the port list of the source ports of the IGMP/MLD snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from themember ports will be forwarded to the source ports.
                                             multicastVlanMemberPort 1.3.6.1.4.1.171.10.76.39.1.27.4.1.4 portlist read-write
This object indicates the port list of the member ports of the IGMP/MLD snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry and the IGMP control messages received from themember ports will be forwarded to the source ports.
                                             multicastVlanTagMemberPort 1.3.6.1.4.1.171.10.76.39.1.27.4.1.5 portlist read-write
This object indicates the port list of the tag member ports of the IGMP/MLD snooping multicast VLAN.
                                             multicastVlanUntaggedSourcePort 1.3.6.1.4.1.171.10.76.39.1.27.4.1.6 portlist read-write
This object indicates the port list of the untag source ports of the IGMP/MLD snooping multicast VLAN.
                                             multicastVlanState 1.3.6.1.4.1.171.10.76.39.1.27.4.1.7 integer read-write
This object can be used to enable or disable the IGMP/MLD snooping multicast VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                                             multicastVlanIgmpReplaceSourceIp 1.3.6.1.4.1.171.10.76.39.1.27.4.1.8 ipaddress read-write
The replacement source IP of this IGMP snooping multicast VLAN.
                                             multicastVlanMldReplaceSourceIp 1.3.6.1.4.1.171.10.76.39.1.27.4.1.9 ipv6address read-write
The replacement source IP of this MLD snooping multicast VLAN.
                                             multicastVlanRemapPriority 1.3.6.1.4.1.171.10.76.39.1.27.4.1.10 integer read-write
The remap priority of this multicast VLAN.
                                             multicastVlanReplacePriority 1.3.6.1.4.1.171.10.76.39.1.27.4.1.11 integer read-write
The replacement priority of this multicast VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                                             multicastVlanRowStatus 1.3.6.1.4.1.171.10.76.39.1.27.4.1.12 rowstatus read-only
This object indicates the status of this entry.
                                     multicastVlanGroupTable 1.3.6.1.4.1.171.10.76.39.1.27.5 no-access
The table containing the IGMP/MLD snooping multicast VLAN group information
                                         multicastVlanGroupEntry 1.3.6.1.4.1.171.10.76.39.1.27.5.1 no-access
The entry of multicastVlanGroupTable.
                                             multicastVlanGroupVid 1.3.6.1.4.1.171.10.76.39.1.27.5.1.1 integer read-only
This object indicates the VID of the IGMP/MLD snooping multicast VLAN group.
                                             multicastVlanGroupIpType 1.3.6.1.4.1.171.10.76.39.1.27.5.1.2 integer read-only
Type of specifies the multicast address list for this VLAN. Enumeration: 'iPv4': 1, 'iPv6': 2.
                                             multicastVlanGroupFromIp 1.3.6.1.4.1.171.10.76.39.1.27.5.1.3 ipv6address read-only
Specifies the multicast address list for this VLAN.
                                             multicastVlanGroupToIp 1.3.6.1.4.1.171.10.76.39.1.27.5.1.4 ipv6address read-only
Specifies the multicast address list for this VLAN.
                                             multicastVlanGroupStatus 1.3.6.1.4.1.171.10.76.39.1.27.5.1.5 rowstatus read-only
This object indicates the status of this entry.
                               companyDHCPRelay 1.3.6.1.4.1.171.10.76.39.1.28
                                     dhcpBOOTPRelayControl 1.3.6.1.4.1.171.10.76.39.1.28.1
                                         dhcpBOOTPRelayState 1.3.6.1.4.1.171.10.76.39.1.28.1.1 integer read-write
This object indicates DHCP relay function is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                         dhcpBOOTPRelayHopCount 1.3.6.1.4.1.171.10.76.39.1.28.1.2 integer read-write
This object indicates the maximum number of router hops that the BOOTP packets can cross.
                                         dhcpBOOTPRelayTimeThreshold 1.3.6.1.4.1.171.10.76.39.1.28.1.3 integer read-write
This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP packet.
                                         dhcpBOOTPRelayEnablePortlist 1.3.6.1.4.1.171.10.76.39.1.28.1.4 portlist read-write
This object indicates DHCP relay function is enabled or disabled by portlist.
                                         dhcpRelayVlanTable 1.3.6.1.4.1.171.10.76.39.1.28.1.5 no-access
This table indicates the IP address as a destination to forward (relay) DHCP packets to.
                                             dhcpRelayVlanTableEntry 1.3.6.1.4.1.171.10.76.39.1.28.1.5.1 no-access
A list of information indicates the IP address as a destination to forward (relay) DHCP packets to.
                                                 dhcpRelayVlanSettingsVLANID 1.3.6.1.4.1.171.10.76.39.1.28.1.5.1.1 integer read-only
This object displays the current VLAN ID of the device.
                                                 dhcpRelayVlanSettingsState 1.3.6.1.4.1.171.10.76.39.1.28.1.5.1.2 integer read-write
This object indicates DHCP relay function of VLAN is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                     dhcpBOOTPRelayManagement 1.3.6.1.4.1.171.10.76.39.1.28.2
                                         dhcpBOOTPRelayInterfaceSettingsTable 1.3.6.1.4.1.171.10.76.39.1.28.2.1 no-access
This table indicates the IP address as a destination to forward (relay) DHCP packets to.
                                             dhcpBOOTPRelayInterfaceSettingsEntry 1.3.6.1.4.1.171.10.76.39.1.28.2.1.1 no-access
A list of information indicates the IP address as a destination to forward (relay) DHCP packets to.
                                                 dhcpBOOTPRelayInterface 1.3.6.1.4.1.171.10.76.39.1.28.2.1.1.1 displaystring read-only
This object indicates the name of the IP interface.
                                                 dhcpBOOTPRelayServerIP 1.3.6.1.4.1.171.10.76.39.1.28.2.1.1.2 ipaddress read-only
This object indicates the DHCP server IP address.
                                                 dhcpBOOTPRelayInterfaceSettingsRowStatus 1.3.6.1.4.1.171.10.76.39.1.28.2.1.1.3 rowstatus read-only
This object indicates the status of this entry.
                                         dhcpBOOTPRelayManagementOption82 1.3.6.1.4.1.171.10.76.39.1.28.2.2
                                             dhcpBOOTPRelayOption82State 1.3.6.1.4.1.171.10.76.39.1.28.2.2.1 integer read-write
This object indicates DHCP relay option 82 function is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                             dhcpBOOTPRelayOption82CheckState 1.3.6.1.4.1.171.10.76.39.1.28.2.2.2 integer read-write
This object indicates DHCP relay option 82 Check function is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                             dhcpBOOTPRelayOption82Policy 1.3.6.1.4.1.171.10.76.39.1.28.2.2.3 integer read-write
This object indicates DHCP relay option 82 policy. Enumeration: 'keep': 3, 'drop': 2, 'replace': 1.
                                             dhcpBOOTPRelayOption82RemoteIDType 1.3.6.1.4.1.171.10.76.39.1.28.2.2.4 integer read-write
This object indicates the type of remote ID. If the type is default, the remote ID will be the MAC address of the device, otherwise, the remote ID can be defined by writing to the swDHCPRelayOption82RemoteID object. Enumeration: 'default': 1, 'userdefinedhex': 3, 'userdefined': 2.
                                             dhcpBOOTPRelayOption82RemoteID 1.3.6.1.4.1.171.10.76.39.1.28.2.2.5 displaystring read-write
This object displays the current remote ID of the device. If swDHCPRelayOption82RemoteIDType is set to default, the value will be the MAC address of the device, and this object cannot be modified. If swDHCPRelayOption82RemoteIDType is set to user-defined or user-defined-hex, a new value can be written to this object.
                                             dhcpBOOTPRelayOption82CircuitIDType 1.3.6.1.4.1.171.10.76.39.1.28.2.2.7 integer read-write
This object indicates the type of remote ID. If the type is default, the circuit ID will be blank, otherwise, the circuit ID can be defined by writing to the dhcpBOOTPRelayOption82CircuitID object. Enumeration: 'default': 1, 'userdefinedhex': 3, 'userdefined': 2.
                                             dhcpBOOTPRelayOption82CircuitID 1.3.6.1.4.1.171.10.76.39.1.28.2.2.8 displaystring read-write
This object displays the current remote ID of the device. If dhcpBOOTPRelayOption82CircuitIDType is set to default, the value will be the MAC address of the device, and this object cannot be modified. If dhcpBOOTPRelayOption82CircuitIDType is set to user-defined or user-defined-hex, a new value can be written to this object.
                               companyDHCPLocalRelay 1.3.6.1.4.1.171.10.76.39.1.29
                                     dhcpLocalRelayGlobalState 1.3.6.1.4.1.171.10.76.39.1.29.1 integer read-write
This object indicates DHCP local relay function of VLAN is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                     dhcpLocalRelayTable 1.3.6.1.4.1.171.10.76.39.1.29.2 no-access
This table indicates the IP address as a destination to forward (local relay) DHCP packets to.
                                         dhcpLocalRelayTableEntry 1.3.6.1.4.1.171.10.76.39.1.29.2.1 no-access
A list of information indicates the IP address as a destination to forward (local relay) DHCP packets to.
                                             dhcpLocalRelaySettingsVLANID 1.3.6.1.4.1.171.10.76.39.1.29.2.1.1 integer read-only
This object displays the current VLAN ID of the device.
                                             dhcpLocalRelaySettingsState 1.3.6.1.4.1.171.10.76.39.1.29.2.1.2 integer read-write
This object indicates DHCP local relay function of VLAN is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                     dhcpLocalRelayEnablePortlist 1.3.6.1.4.1.171.10.76.39.1.29.3 portlist read-write
This object indicates DHCP local relay function is enabled or disabled by portlist.
                               companyGreenSetting 1.3.6.1.4.1.171.10.76.39.1.31
                                     dlinkGreenLEDShutoff 1.3.6.1.4.1.171.10.76.39.1.31.1
                                         dlinkGreenLEDShutoffPortList 1.3.6.1.4.1.171.10.76.39.1.31.1.1 portlist read-write
Provides control to disable LED port.
                                         dlinkGreenLEDShutoffState 1.3.6.1.4.1.171.10.76.39.1.31.1.2 integer read-write
Enable/Disable Green disable LED function. Default is disabled. Enumeration: 'disabled': 0, 'enabled': 1.
                                         dlinkGreenLEDShutoffTimeProfile1 1.3.6.1.4.1.171.10.76.39.1.31.1.3 displaystring read-write
The time profile name associated with the Schedule entry (e.g., `abc, bbb').
                                         dlinkGreenLEDShutoffTimeProfile2 1.3.6.1.4.1.171.10.76.39.1.31.1.4 displaystring read-write
The time profile name associated with the Schedule entry (e.g., `abc, bbb').
                                     dlinkGreenPortShutoff 1.3.6.1.4.1.171.10.76.39.1.31.2
                                         dlinkGreenPortShutoffPortList 1.3.6.1.4.1.171.10.76.39.1.31.2.1 portlist read-write
Provides control to disable LED port.
                                         dlinkGreenPortShutoffState 1.3.6.1.4.1.171.10.76.39.1.31.2.2 integer read-write
Enable/Disable Green disable LED function. Default is disabled. Enumeration: 'disabled': 0, 'enabled': 1.
                                         dlinkGreenPortShutoffTimeProfile1 1.3.6.1.4.1.171.10.76.39.1.31.2.3 displaystring read-write
The time profile name associated with the Schedule entry (e.g., `abc, bbb').
                                         dlinkGreenPortShutoffTimeProfile2 1.3.6.1.4.1.171.10.76.39.1.31.2.4 displaystring read-write
The time profile name associated with the Schedule entry (e.g., `abc, bbb').
                                     dlinkGreenSystemHibernation 1.3.6.1.4.1.171.10.76.39.1.31.4
                                         dlinkGreenSystemHibernationState 1.3.6.1.4.1.171.10.76.39.1.31.4.1 integer read-write
Enable/Disable Green disable LED function. Default is disabled. Enumeration: 'disabled': 0, 'enabled': 1.
                                         dlinkGreenSystemHibernationTimeProfile1 1.3.6.1.4.1.171.10.76.39.1.31.4.2 displaystring read-write
The time profile name associated with the Schedule entry (e.g., `abc, bbb').
                                         dlinkGreenSystemHibernationTimeProfile2 1.3.6.1.4.1.171.10.76.39.1.31.4.3 displaystring read-write
The time profile name associated with the Schedule entry (e.g., `abc, bbb').
                                     dlinkPowerSavLinkStatusDetectState 1.3.6.1.4.1.171.10.76.39.1.31.6 integer read-write
Enable/Disable Power Saving Link Status Detection. Default is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                               companyLLDPSetting 1.3.6.1.4.1.171.10.76.39.1.32
                                     dlinklldpState 1.3.6.1.4.1.171.10.76.39.1.32.1 integer read-write
This object is used for enabling or disabling LLDP in the system. Enumeration: 'enable': 1, 'disable': 2.
                                     dlinklldpMsgHoldMultiplier 1.3.6.1.4.1.171.10.76.39.1.32.2 integer read-write
The time-to-live value expressed as a multiple of the lldpMessageTxInterval object.The actual time-to-live value used in LLDP frames, transmitted on behalf of this LLDP agent, can be expressed by the following formula: TTL = min(65535, (lldpMessageTxInterval * lldpMessageTxHoldMultiplier))
                                     dlinklldpMsgTxInterval 1.3.6.1.4.1.171.10.76.39.1.32.3 integer read-write
This object is used for LLDP packet update frequency. The timer in units of seconds.
                                     dlinklldpReinitDelay 1.3.6.1.4.1.171.10.76.39.1.32.4 integer read-write
This object is used for LLDP Reinitialization Delay. The timer in units of seconds.
                                     dlinklldpTxDelay 1.3.6.1.4.1.171.10.76.39.1.32.5 integer read-write
The lldpTxDelay indicates the delay (in units of seconds) between successive LLDP frame transmissions initiated by value/status changes in the LLDP local systems MIB. The recommended value for the lldpTxDelay is set by the following formula: 1 <= lldpTxDelay <= (0.25 * lldpMessageTxInterval).
                                     dlinklldpConfigManAddrPortsTxEnable 1.3.6.1.4.1.171.10.76.39.1.32.6 portlist read-write
A set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will be transmitted on the member ports of the lldpManAddrPortsTxEnable. The default value for lldpConfigManAddrPortsTxEnable object is empty binary string, which means no ports are specified for advertising indicated management address instance.
                                     lldpPortConfigTable 1.3.6.1.4.1.171.10.76.39.1.32.11 no-access
The table that controls LLDP frame transmission on individual ports.
                                           lldpPortConfigEntry 1.3.6.1.4.1.171.10.76.39.1.32.11.1 no-access
LLDP configuration information for a particular port. This configuration parameter controls the transmission and the reception of LLDP frames on those ports whose rows are created in this table.
                                               lldpPortConfigPortNum 1.3.6.1.4.1.171.10.76.39.1.32.11.1.1 lldpportnumber no-access
The index value used to identify the port component (contained in the local chassis with the LLDP agent) associated with this entry. The value of this object is used as a port index to the lldpPortConfigTable.
                                               lldpPortConfigAdminStatus 1.3.6.1.4.1.171.10.76.39.1.32.11.1.2 integer read-write
The administratively desired status of the local LLDP agent. If the associated lldpPortConfigAdminStatus object has a value of 'txOnly(1)', then LLDP agent will transmit LLDP frames on this port and it will not store any information about the remote systems connected. If the associated lldpPortConfigAdminStatus object has a value of 'rxOnly(2)', then the LLDP agent will receive, but it will not transmit LLDP frames on this port. If the associated lldpPortConfigAdminStatus object has a value of 'txAndRx(3)', then the LLDP agent will transmit and receive LLDP frames on this port. If the associated lldpPortConfigAdminStatus object has a value of 'disabled(4)', then LLDP agent will not transmit or receive LLDP frames on this port. If there is remote systems information which is received on this port and stored in other tables, before the port's lldpPortConfigAdminStatus becomes disabled, then the information will naturally age out. Enumeration: 'disabled': 4, 'rxOnly': 2, 'txOnly': 1, 'txAndRx': 3.
                                               lldpPortConfigNotificationEnable 1.3.6.1.4.1.171.10.76.39.1.32.11.1.3 truthvalue read-write
The lldpPortConfigNotificationEnable controls, on a per port basis, whether or not notifications from the agent are enabled. The value true(1) means that notifications are enabled; the value false(2) means that they are not.
                                               lldpPortConfigTLVsTxEnable 1.3.6.1.4.1.171.10.76.39.1.32.11.1.4 bits read-write
The lldpPortConfigTLVsTxEnable, defined as a bitmap, includes the basic set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to a TLV type associated with a specific optional TLV. It should be noted that the organizationally-specific TLVs are excluded from the lldpTLVsTxEnable bitmap. LLDP Organization Specific Information Extension MIBs should have similar configuration object to control transmission of their organizationally defined TLVs. The bit 'portDesc(0)' indicates that LLDP agent should transmit 'Port Description TLV'. The bit 'sysName(1)' indicates that LLDP agent should transmit 'System Name TLV'. The bit 'sysDesc(2)' indicates that LLDP agent should transmit 'System Description TLV'. The bit 'sysCap(3)' indicates that LLDP agent should transmit 'System Capabilities TLV'. There is no bit reserved for the management address TLV type since transmission of management address TLVs are controlled by another object, lldpConfigManAddrTable. The default value for lldpPortConfigTLVsTxEnable object is empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. Bits: 'sysCap': 3, 'sysName': 1, 'portDesc': 0, 'sysDesc': 2.
                                     lldpXdot3Objects 1.3.6.1.4.1.171.10.76.39.1.32.12
                                           lldpXdot3Config 1.3.6.1.4.1.171.10.76.39.1.32.12.1
                                               lldpXdot3PortConfigTable 1.3.6.1.4.1.171.10.76.39.1.32.12.1.1 no-access
A table that controls selection of LLDP TLVs to be transmitted on individual ports.
                                                   lldpXdot3PortConfigEntry 1.3.6.1.4.1.171.10.76.39.1.32.12.1.1.1 no-access
LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpXdot3PortConfigEntry must be from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system.
                                                       lldpXdot3PortConfigTLVsTxEnable 1.3.6.1.4.1.171.10.76.39.1.32.12.1.1.1.1 bits read-write
The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV. The bit 0 is not used since there is no corresponding subtype. The bit 'macPhyConfigStatus(0)' indicates that LLDP agent should transmit 'MAC/PHY configuration/status TLV'. The bit 'powerViaMDI(1)' indicates that LLDP agent should transmit 'Power via MDI TLV'. The bit 'linkAggregation(2)' indicates that LLDP agent should transmit 'Link Aggregation TLV'. The bit 'maxFrameSize(3)' indicates that LLDP agent should transmit 'Maximum-frame-size TLV'. The default value for lldpXdot3PortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system. Bits: 'powerViaMDI': 1, 'macPhyConfigStatus': 0, 'maxFrameSize': 3, 'linkAggregation': 2.
                                           lldpXdot3LocalData 1.3.6.1.4.1.171.10.76.39.1.32.12.2
                                               lldpXdot3LocPortTable 1.3.6.1.4.1.171.10.76.39.1.32.12.2.1 no-access
This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
                                                   lldpXdot3LocPortEntry 1.3.6.1.4.1.171.10.76.39.1.32.12.2.1.1 no-access
Information about a particular port component.
                                                       lldpXdot3LocPortAutoNegSupported 1.3.6.1.4.1.171.10.76.39.1.32.12.2.1.1.1 truthvalue read-only
The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation.
                                                       lldpXdot3LocPortAutoNegEnabled 1.3.6.1.4.1.171.10.76.39.1.32.12.2.1.1.2 truthvalue read-only
The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system.
                                                       lldpXdot3LocPortAutoNegAdvertisedCap 1.3.6.1.4.1.171.10.76.39.1.32.12.2.1.1.3 octet string read-only
This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system.
                                                       lldpXdot3LocPortOperMauType 1.3.6.1.4.1.171.10.76.39.1.32.12.2.1.1.4 integer32 read-only
An integer value that indicates the operational MAU type of the given port on the local system. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in IETF RFC 3636 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field will be 29. For MAU types not listed in RFC 3636 (or subsequent revisions), the value of this field shall be set to zero.
                                               lldpXdot3LocPowerTable 1.3.6.1.4.1.171.10.76.39.1.32.12.2.2 no-access
This table contains one row per port of power ethernet information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
                                                   lldpXdot3LocPowerEntry 1.3.6.1.4.1.171.10.76.39.1.32.12.2.2.1 no-access
Information about a particular port component.
                                                       lldpXdot3LocPowerPortClass 1.3.6.1.4.1.171.10.76.39.1.32.12.2.2.1.1 lldppowerportclass read-only
The value that identifies the port Class of the given port associated with the local system.
                                                       lldpXdot3LocPowerMDISupported 1.3.6.1.4.1.171.10.76.39.1.32.12.2.2.1.2 truthvalue read-only
The truth value used to indicate whether the MDI power is supported on the given port associated with the local system.
                                                       lldpXdot3LocPowerMDIEnabled 1.3.6.1.4.1.171.10.76.39.1.32.12.2.2.1.3 truthvalue read-only
The truth value used to identify whether MDI power is enabled on the given port associated with the local system.
                                                       lldpXdot3LocPowerPairControlable 1.3.6.1.4.1.171.10.76.39.1.32.12.2.2.1.4 truthvalue read-only
The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the local system.
                                                       lldpXdot3LocPowerPairs 1.3.6.1.4.1.171.10.76.39.1.32.12.2.2.1.5 integer32 read-only
This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the local system.
                                                       lldpXdot3LocPowerClass 1.3.6.1.4.1.171.10.76.39.1.32.12.2.2.1.6 integer32 read-only
This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the local system.
                                               lldpXdot3LocLinkAggTable 1.3.6.1.4.1.171.10.76.39.1.32.12.2.3 no-access
This table contains one row per port of link aggregation information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
                                                   lldpXdot3LocLinkAggEntry 1.3.6.1.4.1.171.10.76.39.1.32.12.2.3.1 no-access
Link Aggregation information about a particular port component.
                                                       lldpXdot3LocLinkAggStatus 1.3.6.1.4.1.171.10.76.39.1.32.12.2.3.1.1 lldplinkaggstatusmap read-only
The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.
                                                       lldpXdot3LocLinkAggPortId 1.3.6.1.4.1.171.10.76.39.1.32.12.2.3.1.2 integer32 read-only
This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component in link aggregation. If the port is not in link aggregation state and/or it does not support link aggregation, this value should be set to zero.
                                               lldpXdot3LocMaxFrameSizeTable 1.3.6.1.4.1.171.10.76.39.1.32.12.2.4 no-access
This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent.
                                                   lldpXdot3LocMaxFrameSizeEntry 1.3.6.1.4.1.171.10.76.39.1.32.12.2.4.1 no-access
Maximum Frame Size information about a particular port component.
                                                       lldpXdot3LocMaxFrameSize 1.3.6.1.4.1.171.10.76.39.1.32.12.2.4.1.1 integer32 read-only
An integer value indicating the maximum supported frame size in octets on the given port of the local system.
                                           lldpXdot3RemoteData 1.3.6.1.4.1.171.10.76.39.1.32.12.3
                                               lldpXdot3RemPortTable 1.3.6.1.4.1.171.10.76.39.1.32.12.3.1 no-access
This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system.
                                                   lldpXdot3RemPortEntry 1.3.6.1.4.1.171.10.76.39.1.32.12.3.1.1 no-access
Information about a particular physical network connection.
                                                       lldpXdot3RemPortAutoNegSupported 1.3.6.1.4.1.171.10.76.39.1.32.12.3.1.1.1 truthvalue read-only
The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation.
                                                       lldpXdot3RemPortAutoNegEnabled 1.3.6.1.4.1.171.10.76.39.1.32.12.3.1.1.2 truthvalue read-only
The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system.
                                                       lldpXdot3RemPortAutoNegAdvertisedCap 1.3.6.1.4.1.171.10.76.39.1.32.12.3.1.1.3 octet string read-only
This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system.
                                                       lldpXdot3RemPortOperMauType 1.3.6.1.4.1.171.10.76.39.1.32.12.3.1.1.4 integer32 read-only
An integer value that indicates the operational MAU type of the sending device. This object contains the integer value derived from the list position of the corresponding dot3MauType as listed in in IETF RFC 3636 (or subsequent revisions) and is equal to the last number in the respective dot3MauType OID. For example, if the ifMauType object is dot3MauType1000BaseTHD which corresponds to {dot3MauType 29}, the numerical value of this field will be 29. For MAU types not listed in RFC 3636 (or subsequent revisions), the value of this field shall be set to zero.
                                               lldpXdot3RemPowerTable 1.3.6.1.4.1.171.10.76.39.1.32.12.3.2 no-access
This table contains Ethernet power information (as a part of the LLDP 802.3 organizational extension) of the remote system.
                                                   lldpXdot3RemPowerEntry 1.3.6.1.4.1.171.10.76.39.1.32.12.3.2.1 no-access
Information about a particular physical network connection.
                                                       lldpXdot3RemPowerPortClass 1.3.6.1.4.1.171.10.76.39.1.32.12.3.2.1.1 lldppowerportclass read-only
The value that identifies the port Class of the given port associated with the remote system.
                                                       lldpXdot3RemPowerMDISupported 1.3.6.1.4.1.171.10.76.39.1.32.12.3.2.1.2 truthvalue read-only
The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system.
                                                       lldpXdot3RemPowerMDIEnabled 1.3.6.1.4.1.171.10.76.39.1.32.12.3.2.1.3 truthvalue read-only
The truth value used to identify whether MDI power is enabled on the given port associated with the remote system.
                                                       lldpXdot3RemPowerPairControlable 1.3.6.1.4.1.171.10.76.39.1.32.12.3.2.1.4 truthvalue read-only
The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the remote system.
                                                       lldpXdot3RemPowerPairs 1.3.6.1.4.1.171.10.76.39.1.32.12.3.2.1.5 integer32 read-only
This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system.
                                                       lldpXdot3RemPowerClass 1.3.6.1.4.1.171.10.76.39.1.32.12.3.2.1.6 integer32 read-only
This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote system.
                                               lldpXdot3RemLinkAggTable 1.3.6.1.4.1.171.10.76.39.1.32.12.3.3 no-access
This table contains port link aggregation information (as a part of the LLDP 802.3 organizational extension) of the remote system.
                                                   lldpXdot3RemLinkAggEntry 1.3.6.1.4.1.171.10.76.39.1.32.12.3.3.1 no-access
Link Aggregation information about remote system's port component.
                                                       lldpXdot3RemLinkAggStatus 1.3.6.1.4.1.171.10.76.39.1.32.12.3.3.1.1 lldplinkaggstatusmap read-only
The bitmap value contains the link aggregation capabilities and the current aggregation status of the link.
                                                       lldpXdot3RemLinkAggPortId 1.3.6.1.4.1.171.10.76.39.1.32.12.3.3.1.2 integer32 read-only
This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component associated with the remote system. If the remote port is not in link aggregation state and/or it does not support link aggregation, this value should be zero.
                                               lldpXdot3RemMaxFrameSizeTable 1.3.6.1.4.1.171.10.76.39.1.32.12.3.4 no-access
This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) of the remote system.
                                                   lldpXdot3RemMaxFrameSizeEntry 1.3.6.1.4.1.171.10.76.39.1.32.12.3.4.1 no-access
Maximum Frame Size information about a particular port component.
                                                       lldpXdot3RemMaxFrameSize 1.3.6.1.4.1.171.10.76.39.1.32.12.3.4.1.1 integer32 read-only
An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system.
                                     lldpXdot1Objects 1.3.6.1.4.1.171.10.76.39.1.32.13
                                           lldpXdot1Config 1.3.6.1.4.1.171.10.76.39.1.32.13.1
                                               lldpXdot1ConfigPortVlanTable 1.3.6.1.4.1.171.10.76.39.1.32.13.1.1 no-access
A table that controls selection of LLDP Port VLAN-ID TLVs to be transmitted on individual ports.
                                                   lldpXdot1ConfigPortVlanEntry 1.3.6.1.4.1.171.10.76.39.1.32.13.1.1.1 no-access
LLDP configuration information that controls the transmission of IEEE 802.1 organizationally defined Port VLAN-ID TLV on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpConfigEntry must be restored from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system.
                                                       lldpXdot1ConfigPortVlanTxEnable 1.3.6.1.4.1.171.10.76.39.1.32.13.1.1.1.1 truthvalue read-write
The lldpXdot1ConfigPortVlanTxEnable, which is defined as a truth value and configured by the network management, determines whether the IEEE 802.1 organizationally defined port VLAN TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
                                               lldpXdot1ConfigVlanNameTable 1.3.6.1.4.1.171.10.76.39.1.32.13.1.2 no-access
The table that controls selection of LLDP VLAN name TLV instances to be transmitted on individual ports.
                                                   lldpXdot1ConfigVlanNameEntry 1.3.6.1.4.1.171.10.76.39.1.32.13.1.2.1 no-access
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System VLAN name instance will be transmitted. This configuration object augments the lldpLocVlanEntry, therefore it is only present along with the VLAN Name instance contained in the associated lldpLocVlanNameEntry entry. Each active lldpXdot1ConfigVlanNameEntry must be restored from non-volatile storage (along with the corresponding lldpXdot1LocVlanNameEntry) after a re-initialization of the management system.
                                                       lldpXdot1ConfigVlanNameTxEnable 1.3.6.1.4.1.171.10.76.39.1.32.13.1.2.1.1 truthvalue read-write
The boolean value that indicates whether the corresponding Local System VLAN name instance will be transmitted on the port defined by the given lldpXdot1LocVlanNameEntry. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
                                               lldpXdot1ConfigProtoVlanTable 1.3.6.1.4.1.171.10.76.39.1.32.13.1.3 no-access
The table that controls selection of LLDP Port and Protocol VLAN ID TLV instances to be transmitted on individual ports.
                                                   lldpXdot1ConfigProtoVlanEntry 1.3.6.1.4.1.171.10.76.39.1.32.13.1.3.1 no-access
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol VLAN instance will be transmitted. This configuration object augments the lldpXdot1LocVlanEntry, therefore it is only present along with the Port and Protocol VLAN ID instance contained in the associated lldpXdot1LocVlanEntry entry. Each active lldpXdot1ConfigProtoVlanEntry must be restored from non-volatile storage (along with the corresponding lldpXdot1LocProtoVlanEntry) after a re-initialization of the management system.
                                                       lldpXdot1ConfigProtoVlanTxEnable 1.3.6.1.4.1.171.10.76.39.1.32.13.1.3.1.1 truthvalue read-write
The boolean value that indicates whether the corresponding Local System Port and Protocol VLAN instance will be transmitted on the port defined by the given lldpXdot1LocProtoVlanEntry. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
                                               lldpXdot1ConfigProtocolTable 1.3.6.1.4.1.171.10.76.39.1.32.13.1.4 no-access
The table that controls selection of LLDP Protocol TLV instances to be transmitted on individual ports.
                                                   lldpXdot1ConfigProtocolEntry 1.3.6.1.4.1.171.10.76.39.1.32.13.1.4.1 no-access
LLDP configuration information that specifies the set of ports (represented as a PortList) on which the Local System Protocol instance will be transmitted. This configuration object augments the lldpXdot1LocProtoEntry, therefore it is only present along with the Protocol instance contained in the associated lldpXdot1LocProtoEntry entry. Each active lldpXdot1ConfigProtocolEntry must be restored from non-volatile storage (along with the corresponding lldpXdot1LocProtocolEntry) after a re-initialization of the management system.
                                                       lldpXdot1ConfigProtocolTxEnable 1.3.6.1.4.1.171.10.76.39.1.32.13.1.4.1.1 truthvalue read-write
The boolean value that indicates whether the corresponding Local System Protocol Identity instance will be transmitted on the port defined by the given lldpXdot1LocProtocolEntry. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
                                           lldpXdot1LocalData 1.3.6.1.4.1.171.10.76.39.1.32.13.2
                                               lldpXdot1LocTable 1.3.6.1.4.1.171.10.76.39.1.32.13.2.1 no-access
This table contains one row per port for IEEE 802.1 organizationally defined LLDP extension on the local system known to this agent.
                                                   lldpXdot1LocEntry 1.3.6.1.4.1.171.10.76.39.1.32.13.2.1.1 no-access
Information about IEEE 802.1 organizationally defined LLDP extension.
                                                       lldpXdot1LocPortVlanId 1.3.6.1.4.1.171.10.76.39.1.32.13.2.1.1.1 integer32 read-only
The integer value used to identify the port's VLAN identifier associated with the local system. A value of zero shall be used if the system either does not know the PVID or does not support port-based VLAN operation.
                                               lldpXdot1LocProtoVlanTable 1.3.6.1.4.1.171.10.76.39.1.32.13.2.2 no-access
This table contains one or more rows per Port and Protocol VLAN information about the local system.
                                                   lldpXdot1LocProtoVlanEntry 1.3.6.1.4.1.171.10.76.39.1.32.13.2.2.1 no-access
Port and protocol VLAN ID Information about a particular port component. There may be multiple port and protocol VLANs, identified by a particular lldpXdot1LocProtoVlanId, configured on the given port.
                                                       lldpXdot1LocProtoVlanId 1.3.6.1.4.1.171.10.76.39.1.32.13.2.2.1.1 integer32 no-access
The integer value used to identify the port and protocol VLANs associated with the given port associated with the local system. A value of zero shall be used if the system either does not know the protocol VLAN ID (PPVID) or does not support port and protocol VLAN operation.
                                                       lldpXdot1LocProtoVlanSupported 1.3.6.1.4.1.171.10.76.39.1.32.13.2.2.1.2 truthvalue read-only
The truth value used to indicate whether the given port (associated with the local system) supports port and protocol VLANs.
                                                       lldpXdot1LocProtoVlanEnabled 1.3.6.1.4.1.171.10.76.39.1.32.13.2.2.1.3 truthvalue read-only
The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the local system.
                                               lldpXdot1LocVlanNameTable 1.3.6.1.4.1.171.10.76.39.1.32.13.2.3 no-access
This table contains one or more rows per IEEE 802.1Q VLAN name information on the local system known to this agent.
                                                   lldpXdot1LocVlanNameEntry 1.3.6.1.4.1.171.10.76.39.1.32.13.2.3.1 no-access
VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpXdot1LocVlanId, configured on the given port.
                                                       lldpXdot1LocVlanId 1.3.6.1.4.1.171.10.76.39.1.32.13.2.3.1.1 vlanid no-access
The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port is compatible.
                                                       lldpXdot1LocVlanName 1.3.6.1.4.1.171.10.76.39.1.32.13.2.3.1.2 snmpadminstring read-only
The string value used to identify VLAN name identified by the Vlan Id associated with the given port on the local system. This object should contain the value of the dot1QVLANStaticName object (defined in IETF RFC 2674) identified with the given lldpXdot1LocVlanId.
                                               lldpXdot1LocProtocolTable 1.3.6.1.4.1.171.10.76.39.1.32.13.2.4 no-access
This table contains one or more rows per protocol identity information on the local system known to this agent.
                                                   lldpXdot1LocProtocolEntry 1.3.6.1.4.1.171.10.76.39.1.32.13.2.4.1 no-access
Information about particular protocols that are accessible through the given port component. There may be multiple protocols, identified by particular lldpXdot1ProtocolIndex, and lldpLocPortNum.
                                                       lldpXdot1LocProtocolIndex 1.3.6.1.4.1.171.10.76.39.1.32.13.2.4.1.1 integer32 no-access
This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.
                                                       lldpXdot1LocProtocolId 1.3.6.1.4.1.171.10.76.39.1.32.13.2.4.1.2 octet string read-only
The octet string value used to identify the protocols associated with the given port of the local system.
                                           lldpXdot1RemoteData 1.3.6.1.4.1.171.10.76.39.1.32.13.3
                                               lldpXdot1RemTable 1.3.6.1.4.1.171.10.76.39.1.32.13.3.1 no-access
This table contains one or more rows per physical network connection known to this agent. The agent may wish to ensure that only one lldpXdot1RemEntry is present for each local port, or it may choose to maintain multiple lldpXdot1RemEntries for the same local port.
                                                   lldpXdot1RemEntry 1.3.6.1.4.1.171.10.76.39.1.32.13.3.1.1 no-access
Information about a particular port component.
                                                       lldpXdot1RemPortVlanId 1.3.6.1.4.1.171.10.76.39.1.32.13.3.1.1.1 integer32 read-only
The integer value used to identify the port's VLAN identifier associated with the remote system. if the remote system either does not know the PVID or does not support port-based VLAN operation, the value of lldpXdot1RemPortVlanId should be zero.
                                               lldpXdot1RemProtoVlanTable 1.3.6.1.4.1.171.10.76.39.1.32.13.3.2 no-access
This table contains one or more rows per Port and Protocol VLAN information about the remote system, received on the given port.
                                                   lldpXdot1RemProtoVlanEntry 1.3.6.1.4.1.171.10.76.39.1.32.13.3.2.1 no-access
Port and protocol VLAN name Information about a particular port component. There may be multiple protocol VLANs, identified by a particular lldpXdot1RemProtoVlanId, configured on the remote system.
                                                       lldpXdot1RemProtoVlanId 1.3.6.1.4.1.171.10.76.39.1.32.13.3.2.1.1 integer32 no-access
The integer value used to identify the port and protocol VLANs associated with the given port associated with the remote system. If port and protocol VLANs are not supported on the given port associated with the remote system, or if the port is not enabled with any port and protocol VLAN, the value of lldpXdot1RemProtoVlanId should be zero.
                                                       lldpXdot1RemProtoVlanSupported 1.3.6.1.4.1.171.10.76.39.1.32.13.3.2.1.2 truthvalue read-only
The truth value used to indicate whether the given port (associated with the remote system) is capable of supporting port and protocol VLANs.
                                                       lldpXdot1RemProtoVlanEnabled 1.3.6.1.4.1.171.10.76.39.1.32.13.3.2.1.3 truthvalue read-only
The truth value used to indicate whether the port and protocol VLANs are enabled on the given port associated with the remote system.
                                               lldpXdot1RemVlanNameTable 1.3.6.1.4.1.171.10.76.39.1.32.13.3.3 no-access
This table contains one or more rows per IEEE 802.1Q VLAN name information about the remote system, received on the given port.
                                                   lldpXdot1RemVlanNameEntry 1.3.6.1.4.1.171.10.76.39.1.32.13.3.3.1 no-access
VLAN name Information about a particular port component. There may be multiple VLANs, identified by a particular lldpXdot1RemVlanId, received on the given port.
                                                       lldpXdot1RemVlanId 1.3.6.1.4.1.171.10.76.39.1.32.13.3.3.1.1 vlanid no-access
The integer value used to identify the IEEE 802.1Q VLAN IDs with which the given port of the remote system is compatible.
                                                       lldpXdot1RemVlanName 1.3.6.1.4.1.171.10.76.39.1.32.13.3.3.1.2 snmpadminstring read-only
The string value used to identify VLAN name identified by the VLAN Id associated with the remote system.
                                               lldpXdot1RemProtocolTable 1.3.6.1.4.1.171.10.76.39.1.32.13.3.4 no-access
This table contains one or more rows per protocol information about the remote system, received on the given port.
                                                   lldpXdot1RemProtocolEntry 1.3.6.1.4.1.171.10.76.39.1.32.13.3.4.1 no-access
Protocol information about a particular port component. There may be multiple protocols, identified by a particular lldpXdot1ProtocolIndex, received on the given port.
                                                       lldpXdot1RemProtocolIndex 1.3.6.1.4.1.171.10.76.39.1.32.13.3.4.1.1 integer32 no-access
This object represents an arbitrary local integer value used by this agent to identify a particular protocol identity.
                                                       lldpXdot1RemProtocolId 1.3.6.1.4.1.171.10.76.39.1.32.13.3.4.1.2 octet string read-only
The octet string value used to identify the protocols associated with the given port of remote system.
                               companyCPUInterfaceFilterGroup 1.3.6.1.4.1.171.10.76.39.1.33
                                     cpuFilterProfile 1.3.6.1.4.1.171.10.76.39.1.33.1
                                         ipv4cpuFilterProfileTable 1.3.6.1.4.1.171.10.76.39.1.33.1.1 no-access
A table to CPUInterfaceFilter profile .
                                             ipv4cpuFilterProfileEntry 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1 no-access
Each entry in this table is a CPUInterfaceFilter profile. Index to the table is CPUInterfaceFilter profile ID.
                                                 ipv4cpuFilterProfileNo 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.1 integer32 read-only
The CPUInterfaceFilter Profile ID. The ID 1 to 50 is user-defined CPUInterfaceFilter, and the ID more than 50 is reserved for system-defined CPUInterfaceFilter. The user only allow to create user-defined CPUInterfaceFilter ID. And system-defined CPUInterfaceFilter is read only.
                                                 ipv4cpuFilterProfileType 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.2 integer read-write
The CPUInterfaceFilter Profile type, possible value are l2 (1) - for MAC-based rule, l3 (2) - for IPv4-based rule, l3v6 (11) - for IPv6-based rule Enumeration: 'l3v6': 11, 'l2': 1, 'l3': 2.
                                                 ipv4cpuFilterProfileRuleCount 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.3 integer32 read-only
The number of rules in this profile.
                                                 ipv4cpuFilterProfileMask 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.4 octet string read-write
Indicate which field want to care in the packet. Turn on the following bits to select the following items Type Item BIT ------------------------------------------ L2 DST_MAC 0 (LSB) L2 SRC_MAC 1 L2 VID 2 L2 8021P_PRIORITY 3 L2 ETHER_TYPE 4 L3 DSCP 5 L3 ICMP_TYPE 6 L3 ICMP_CODE 7 L3 IGMP_TYPE 8 L3 DST_IP 9 L3 SRC_IP 10 L3 DST_PORT 11 L3 SRC_PORT 12 L3 TCPFLAG 13 (MSB) ------------------------------------------- The value is in Hex format.
                                                 ipv4cpuFilterProfileDstMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.5 macaddress read-write
The CPUInterfaceFilter Profile destination MAC address mask. If DST_MAC is turn on in cpuFilterProfileMask, it will work with its member rule field,cpuFilterL2RuleDstMacAddr, to caculate a range of MAC address which is really care.
                                                 ipv4cpuFilterProfileSrcMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.6 macaddress read-write
The CPUInterfaceFilter Profile source MAC address mask. If SRC_MAC is turn on in cpuFilterProfileMask, it will work with its member rule field,cpuFilterL2RuleSrcMacAddr, to caculate a range of MAC address which is really care.
                                                 ipv4cpuFilterProfileIPProtocol 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.7 integer read-write
Indicate which IP Protocol will be care in this profile. Only profile type is l3 can set the IP protocol. For others, this field will be none. Enumeration: 'none': 0, 'udp': 17, 'tcp': 6, 'ipMask': 255, 'icmp': 1, 'igmp': 2.
                                                 ipv4cpuFilterProfileIPProtocolMask 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.8 octet string read-write
The CPUInterfaceFilter Profile IP protocol mask. If cpuFilterProfileIPProtocol set to ipMask, this field will be refered. It will work with its member rule field,cpuFilterL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format.
                                                 ipv4cpuFilterProfileDstIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.9 ipaddress read-write
The CPUInterfaceFilter Profile destination IP address mask. If DST_IP is turn on in cpuFilterProfileMask, it will work with its member rule field,cpuFilterL3RuleDstIpAddr, to caculate a range of IP address which is really care. The value is in HEX format, for example: '255.255.255.0' is presented to 'FFFFFF00'
                                                 ipv4cpuFilterProfileSrcIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.10 ipaddress read-write
The CPUInterfaceFilter Profile source IP address mask. If SRC_IP is turn on in cpuFilterProfileMask, it will work with its member rule field,cpuFilterL3RuleSrcIpAddr, to caculate a range of IP address which is really care. The value is in HEX format, for example: '255.255.255.0' is presented to 'FFFFFF00'
                                                 ipv4cpuFilterProfileDstPortMask 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.11 octet string read-write
The CPUInterfaceFilter Profile UDP/TCP destination port mask. If DST_PORT is turn on in cpuFilterProfileMask, it will work with its member rule field,cpuFilterL3RuleTcpUdpDstPort, to caculate a range of destination port which is really care. The value is in HEX format.
                                                 ipv4cpuFilterProfileSrcPortMask 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.12 octet string read-write
The CPUInterfaceFilter Profile UDP/TCP source port mask. If SRC_PORT is turn on in cpuFilterProfileMask, it will work with its member rule field,cpuFilterL3RuleTcpUdpSrcPort, to caculate a range of source port which is really care. The value is in HEX format.
                                                 ipv4cpuFilterProfileStatus 1.3.6.1.4.1.171.10.76.39.1.33.1.1.1.15 rowstatus read-only
This object indicates the status of this entry, can only be set to 'createAndWait','active' and 'destroy'. When the value of the entry status is 'createAndWait', it could be set to 'active' only if the three values of cpuFilterProfileType, cpuFilterProfileMask and ProtocolType are not conflicted.
                                         cpuFilterProfileTable 1.3.6.1.4.1.171.10.76.39.1.33.1.2 no-access
A table to CPUInterfaceFilter profile .
                                             cpuFilterProfileEntry 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1 no-access
Each entry in this table is a CPUInterfaceFilter profile. Index to the table is CPUInterfaceFilter profile ID.
                                                 cpuFilterProfileNo 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.1 integer32 read-only
The CPUInterfaceFilter Profile ID. The ID 1 to 50 is user-defined CPUInterfaceFilter, and the ID more than 50 is reserved for system-defined CPUInterfaceFilter. The user only allow to create user-defined CPUInterfaceFilter ID. And system-defined CPUInterfaceFilter is read only.
                                                 cpuFilterProfileType 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.2 integer read-write
The CPUInterfaceFilter Profile type, possible value are l2 (1) - for MAC-based rule, l3 (2) - for IPv4-based rule, l3v6 (11) - for IPv6-based rule Enumeration: 'l3v6': 11, 'l2': 1, 'l3': 2.
                                                 cpuFilterProfileRuleCount 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.3 integer32 read-only
The number of rules in this profile.
                                                 cpuFilterProfileMask 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.4 octet string read-write
Indicate which field want to care in the packet. Turn on the following bits to select the following items Type Item BIT ------------------------------------------ L2 DST_MAC 0 (LSB) L2 SRC_MAC 1 L2 VID 2 L2 8021P_PRIORITY 3 L2 ETHER_TYPE 4 L3 DSCP 5 L3 ICMP_TYPE 6 L3 ICMP_CODE 7 L3 IGMP_TYPE 8 L3 DST_IP 9 L3 SRC_IP 10 L3 DST_PORT 11 L3 SRC_PORT 12 L3 TCPFLAG 13 (MSB) L3 TRAFFIC_CLASS 21 ------------------------------------------- The value is in Hex format.
                                                 cpuFilterProfileDstMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.5 macaddress read-write
The CPUInterfaceFilter Profile destination MAC address mask. If DST_MAC is turn on in cpuFilterProfileMask, it will work with its member rule field,cpuFilterL2RuleDstMacAddr, to caculate a range of MAC address which is really care.
                                                 cpuFilterProfileSrcMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.6 macaddress read-write
The CPUInterfaceFilter Profile source MAC address mask. If SRC_MAC is turn on in cpuFilterProfileMask, it will work with its member rule field,cpuFilterL2RuleSrcMacAddr, to caculate a range of MAC address which is really care.
                                                 cpuFilterProfileIPProtocol 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.7 integer read-write
Indicate which IP Protocol will be care in this profile. Only profile type is l3 can set the IP protocol. For others, this field will be none. Enumeration: 'none': 0, 'udp': 17, 'tcp': 6, 'ipMask': 255, 'icmp': 1, 'igmp': 2.
                                                 cpuFilterProfileIPProtocolMask 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.8 octet string read-write
The CPUInterfaceFilter Profile IP protocol mask. If cpuFilterProfileIPProtocol set to ipMask, this field will be refered. It will work with its member rule field,cpuFilterL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format.
                                                 cpuFilterProfileDstIpAddrMaskType 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.9 integer read-write
IPv6 Address type. Enumeration: 'iPv4': 1, 'iPv6': 2.
                                                 cpuFilterProfileDstIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.10 ipv6address read-write
The CPUInterfaceFilter Profile destination IP address mask. If DST_IP is turn on in cpuFilterProfileMask, it will work with its member rule field,cpuFilterL3RuleDstIpAddr, to caculate a range of IP address which is really care. The value is in HEX format, for example: '255.255.255.0' is presented to 'FFFFFF00'
                                                 cpuFilterProfileSrcIpAddrMaskType 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.11 integer read-write
IPv6 Address type. Enumeration: 'iPv4': 1, 'iPv6': 2.
                                                 cpuFilterProfileSrcIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.12 ipv6address read-write
The CPUInterfaceFilter Profile source IP address mask. If SRC_IP is turn on in cpuFilterProfileMask, it will work with its member rule field,cpuFilterL3RuleSrcIpAddr, to caculate a range of IP address which is really care. The value is in HEX format, for example: '255.255.255.0' is presented to 'FFFFFF00'
                                                 cpuFilterProfileDstPortMask 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.13 octet string read-write
The CPUInterfaceFilter Profile UDP/TCP destination port mask. If DST_PORT is turn on in cpuFilterProfileMask, it will work with its member rule field,cpuFilterL3RuleTcpUdpDstPort, to caculate a range of destination port which is really care. The value is in HEX format.
                                                 cpuFilterProfileSrcPortMask 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.14 octet string read-write
The CPUInterfaceFilter Profile UDP/TCP source port mask. If SRC_PORT is turn on in cpuFilterProfileMask, it will work with its member rule field,cpuFilterL3RuleTcpUdpSrcPort, to caculate a range of source port which is really care. The value is in HEX format.
                                                 cpuFilterProfileStatus 1.3.6.1.4.1.171.10.76.39.1.33.1.2.1.15 rowstatus read-only
This object indicates the status of this entry, can only be set to 'createAndWait','active' and 'destroy'. When the value of the entry status is 'createAndWait', it could be set to 'active' only if the three values of cpuFilterProfileType, cpuFilterProfileMask and ProtocolType are not conflicted.
                                     cpuFilterL2Rule 1.3.6.1.4.1.171.10.76.39.1.33.2
                                         cpuFilterL2RuleTable 1.3.6.1.4.1.171.10.76.39.1.33.2.1 no-access
A table to configure L2 filter rules in the system.
                                             cpuFilterL2RuleEntry 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1 no-access
Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number and Profile ID.
                                                 cpuFilterL2ProfileID 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1.1 integer32 read-only
L2 Filter rule ID.
                                                 cpuFilterL2AccessID 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1.2 integer32 read-only
CPUInterfaceFilter Profile ID which this rule join.
                                                 cpuFilterL2RuleEtherType 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1.3 integer32 read-write
The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '-1', which means the rule don't care this condition.
                                                 cpuFilterL2RuleDstMacAddr 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1.4 macaddress read-write
Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero,which means the rule don't care this condition.
                                                 cpuFilterL2RuleSrcMacAddr 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1.5 macaddress read-write
Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero, which means the rule don't care this condition.. address
                                                 cpuFilterL2RuleVlanId 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1.6 integer32 read-write
Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. By Default, the value will be '-1', which means the rule don't care this condition.
                                                 cpuFilterL2Rule1pPriority 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1.7 integer32 read-write
802.1p priority to be matched with the packet. By Default, the value will be '-1', which means the rule don't care this condition.
                                                 cpuFilterL2RuleDstMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1.8 macaddress read-only
The MAC address Mask work for Destination MAC address. This field is read-only and copy from it's Profile setting.
                                                 cpuFilterL2RuleSrcMacAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1.9 macaddress read-only
The MAC address Mask work for Source MAC address. This field is read-only and copy from it's Profile setting.
                                                 cpuFilterL2RuleInPortList 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1.10 portlist read-write
Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list.
                                                 cpuFilterL2RuleAction 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1.11 integer read-write
Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding rules. If the action is 'drop', the packet will be discarded. Enumeration: 'drop': 2, 'allow': 1.
                                                 cpuFilterL2RuleStatus 1.3.6.1.4.1.171.10.76.39.1.33.2.1.1.14 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                     cpuFilterL3Rule 1.3.6.1.4.1.171.10.76.39.1.33.3
                                         cpuFilterL3RuleTable 1.3.6.1.4.1.171.10.76.39.1.33.3.1 no-access
A table to configure L3 filter rules in the system.
                                             cpuFilterL3RuleEntry 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1 no-access
Each entry in this table is a L3 filter rule. Index to the table is L3 filter number and Profile ID.
                                                 cpuFilterL3RuleProfileNo 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.1 integer32 read-only
L3 Filter rule ID.
                                                 cpuFilterL3RuleAccessID 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.2 integer32 read-only
The Profile ID which this rule join.
                                                 cpuFilterL3RuleProtocol 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.3 integer read-write
The type of protocol to be checked against the packet. Enumeration: 'udp': 17, 'icmp': 1, 'tcp': 6, 'igmp': 2.
                                                 cpuFilterL3RuleProtocolMask 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.4 octet string read-only
The IP protocol mask. This field is read-only and copy from it's Profile setting. It will work with the other field,cpuFilterL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format.
                                                 cpuFilterL3RuleICMPMessageType 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.5 integer32 read-write
The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in cpuFilterL3RuleAction. The default value is '-1',which means the rule don't care this condition. Some ICMP message types are: echoReply(0), destinationUnreachable(3), sourceQuench(4), redirect(5), echoRequest(8), timeExceeded(11), parameterProblem(12), timestampRequest(13), timestampReply(14), informationRequest(15), informationReply(16), addressMaskRequest(17), addressMaskReply (18),
                                                 cpuFilterL3RuleICMPMessageCode 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.6 integer32 read-write
The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in cpuFilterL3RuleAction. The default value is '-1', which means the rule don't care this condition. Some ICMP message codes are : networkUnreachable(0), hostUnreachable(1), protocolUnreachable(2), portUnreachable(3), fragmentNeed(4), sourceRouteFail(5), destNetworkUnknown(6), destHostUnknown(7), srcHostIsolated(8), destNetworkAdminProhibited(9), destHostAdminProhibited(10), networkUnreachableTOS(11), hostUnreachableTOS(12),
                                                 cpuFilterL3RuleDstIpAddr 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.7 ipaddress read-write
Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
                                                 cpuFilterL3RuleSrcIpAddr 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.8 ipaddress read-write
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
                                                 cpuFilterL3RuleDstIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.9 ipaddress read-only
The IP subnet mask for Destination IP address. This field is read-only and copy from it's Profile setting.
                                                 cpuFilterL3RuleSrcIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.10 ipaddress read-only
The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting.
                                                 cpuFilterL3RuleTcpUdpDstPort 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.11 integer32 read-write
The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.
                                                 cpuFilterL3RuleTcpUdpSrcPort 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.12 integer32 read-write
The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.
                                                 cpuFilterL3RuleTcpUdpDstPortMask 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.13 octet string read-only
The TCP / UDP Destination port Mask. This field is read-only and copy from it's Profile setting.
                                                 cpuFilterL3RuleTcpUdpSrcPortMask 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.14 octet string read-only
The TCP / UDP Source port Mask. This field is read-only and copy from it's Profile setting.
                                                 cpuFilterL3RuleTcpAckBit 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.15 integer read-only
The TCP ACK bit to be checked against the packet. The default value is 'dontcare'(-1), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dontcare': -1.
                                                 cpuFilterL3RuleTcpRstBit 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.16 integer read-only
The TCP RST bit to be checked against the packet. The default value is 'dontcare'(-1), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dontcare': -1.
                                                 cpuFilterL3RuleTcpUrgBit 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.17 integer read-only
The TCP Urg bit to be checked against the packet. The default value is 'dontcare'(-1), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dontcare': -1.
                                                 cpuFilterL3RuleTcpPshBit 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.18 integer read-only
The TCP Psh bit to be checked against the packet. The default value is 'dontcare'(-1). which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dontcare': -1.
                                                 cpuFilterL3RuleTcpSynBit 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.19 integer read-only
The TCP Syn bit to be checked against the packet. The default value is 'dontcare'(-1), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dontcare': -1.
                                                 cpuFilterL3RuleTcpFinBit 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.20 integer read-only
The TCP Fin bit to be checked against the packet. The default value is 'dontcare'(-1), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dontcare': -1.
                                                 cpuFilterL3RuleDscp 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.21 integer32 read-only
The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition.
                                                 cpuFilterL3RuleIgmpType 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.22 integer32 read-write
The IGMP Type to be checked against the packet.A default value is '-1', which means the rule don't care this condition.
                                                 cpuFilterL3RulePortList 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.23 portlist read-write
Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable.
                                                 cpuFilterL3RuleAction 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.24 integer read-write
Specifies the action to be taken on the packet if the filter rule matches. Enumeration: 'drop': 2, 'allow': 1.
                                                 cpuFilterL3RuleStatus 1.3.6.1.4.1.171.10.76.39.1.33.3.1.1.27 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                         cpuFilterv6L3RuleTable 1.3.6.1.4.1.171.10.76.39.1.33.3.2 no-access
A table to configure L3 filter rules in the system.
                                             cpuFilterv6L3RuleEntry 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1 no-access
Each entry in this table is a L3 filter rule. Index to the table is L3 filter number and Profile ID.
                                                 cpuFilterv6L3RuleProfileNo 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.1 integer32 read-only
L3 Filter rule ID.
                                                 cpuFilterv6L3RuleAccessID 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.2 integer32 read-only
The Profile ID which this rule join.
                                                 cpuFilterv6L3RuleProtocol 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.3 integer read-write
The type of protocol to be checked against the packet. Enumeration: 'udp': 17, 'icmp': 1, 'tcp': 6.
                                                 cpuFilterv6L3RuleProtocolMask 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.4 octet string read-only
The IP protocol mask. This field is read-only and copy from it's Profile setting. It will work with the other field,cpuFilterL3RuleProtocol, to caculate a range of IP protocol which is really care. The value is in HEX format.
                                                 cpuFilterv6L3RuleICMPMessageType 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.5 integer32 read-write
The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action set in cpuFilterL3RuleAction. The default value is '-1',which means the rule don't care this condition. Some ICMP message types are: echoReply(0), destinationUnreachable(3), sourceQuench(4), redirect(5), echoRequest(8), timeExceeded(11), parameterProblem(12), timestampRequest(13), timestampReply(14), informationRequest(15), informationReply(16), addressMaskRequest(17), addressMaskReply (18),
                                                 cpuFilterv6L3RuleICMPMessageCode 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.6 integer32 read-write
The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action set in cpuFilterL3RuleAction. The default value is '-1', which means the rule don't care this condition. Some ICMP message codes are : networkUnreachable(0), hostUnreachable(1), protocolUnreachable(2), portUnreachable(3), fragmentNeed(4), sourceRouteFail(5), destNetworkUnknown(6), destHostUnknown(7), srcHostIsolated(8), destNetworkAdminProhibited(9), destHostAdminProhibited(10), networkUnreachableTOS(11), hostUnreachableTOS(12),
                                                 cpuFilterv6L3RuleDstIpAddr 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.7 ipv6address read-write
Destination IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
                                                 cpuFilterv6L3RuleSrcIpAddr 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.8 ipv6address read-write
Source IP address to be matched with the packet. The default value will be zero, which means the rule don't care this condition.
                                                 cpuFilterv6L3RuleDstIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.9 ipv6address read-only
The IP subnet mask for Destination IP address. This field is read-only and copy from it's Profile setting.
                                                 cpuFilterv6L3RuleSrcIpAddrMask 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.10 ipv6address read-only
The IP subnet mask for Source IP address. This field is read-only and copy from it's Profile setting.
                                                 cpuFilterv6L3RuleTcpUdpDstPort 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.11 integer32 read-write
The TCP / UDP destination port. The default value is -1, which means the rule don't care this condition.
                                                 cpuFilterv6L3RuleTcpUdpSrcPort 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.12 integer32 read-write
The TCP / UDP source port. The default value is -1, which means the rule don't care this condition.
                                                 cpuFilterv6L3RuleTcpUdpDstPortMask 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.13 octet string read-only
The TCP / UDP Destination port Mask. This field is read-only and copy from it's Profile setting.
                                                 cpuFilterv6L3RuleTcpUdpSrcPortMask 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.14 octet string read-only
The TCP / UDP Source port Mask. This field is read-only and copy from it's Profile setting.
                                                 cpuFilterv6L3RuleTcpAckBit 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.15 integer read-only
The TCP ACK bit to be checked against the packet. The default value is 'dontcare'(-1), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dontcare': -1.
                                                 cpuFilterv6L3RuleTcpRstBit 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.16 integer read-only
The TCP RST bit to be checked against the packet. The default value is 'dontcare'(-1), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dontcare': -1.
                                                 cpuFilterv6L3RuleTcpUrgBit 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.17 integer read-only
The TCP Urg bit to be checked against the packet. The default value is 'dontcare'(-1), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dontcare': -1.
                                                 cpuFilterv6L3RuleTcpPshBit 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.18 integer read-only
The TCP Psh bit to be checked against the packet. The default value is 'dontcare'(-1). which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dontcare': -1.
                                                 cpuFilterv6L3RuleTcpSynBit 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.19 integer read-only
The TCP Syn bit to be checked against the packet. The default value is 'dontcare'(-1), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dontcare': -1.
                                                 cpuFilterv6L3RuleTcpFinBit 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.20 integer read-only
The TCP Fin bit to be checked against the packet. The default value is 'dontcare'(-1), which means the rule don't care this condition. Enumeration: 'notEstablish': 2, 'establish': 1, 'dontcare': -1.
                                                 cpuFilterv6L3RuleTrafficClass 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.21 integer32 read-only
The IP Dscp value to be checked against the packet. A default value is '-1', which means the rule don't care this condition.
                                                 cpuFilterv6L3RulePortList 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.22 portlist read-write
Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable.
                                                 cpuFilterv6L3RuleAction 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.23 integer read-write
Specifies the action to be taken on the packet if the filter rule matches. Enumeration: 'drop': 2, 'allow': 1.
                                                 cpuFilterv6L3RuleStatus 1.3.6.1.4.1.171.10.76.39.1.33.3.2.1.24 rowstatus read-only
This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used when the status of this object is SET 'active'. The entry in this table is not used when this object is SET 'notInService'. An entry created in this table is be deleted when this object is SET 'destroy'.
                                     cpuFilterState 1.3.6.1.4.1.171.10.76.39.1.33.4 integer read-write
This object is used for enabling or disabling CPU Interface Filter in the system. Enumeration: 'enable': 1, 'disable': 2.
                               companyStaticARP 1.3.6.1.4.1.171.10.76.39.1.34
                                     staticARPTable 1.3.6.1.4.1.171.10.76.39.1.34.2 no-access
A list of the Static MACs
                                         staticARPEntry 1.3.6.1.4.1.171.10.76.39.1.34.2.1 no-access
A Static MAC entry containing the mac and forwarding port.
                                             staticARPIP 1.3.6.1.4.1.171.10.76.39.1.34.2.1.2 ipaddress read-only
The VLAN ID of the static ARP IP.
                                             staticARPMac 1.3.6.1.4.1.171.10.76.39.1.34.2.1.3 macaddress read-only
The MAC address associated of the static ARP entry.
                                             staticARPRowStatus 1.3.6.1.4.1.171.10.76.39.1.34.2.1.5 rowstatus read-write
The status of an entry in the Static ARP Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available. The trunk member port can not set up static ARP.
                               companyVLANTrunk 1.3.6.1.4.1.171.10.76.39.1.36
                                     vlanTrunkSystem 1.3.6.1.4.1.171.10.76.39.1.36.1
                                         vlanTrunkGlobalStatus 1.3.6.1.4.1.171.10.76.39.1.36.1.1 integer read-write
This indicates the global state of the VLAN trunking feature of the device. Enumeration: 'disabled': 2, 'enabled': 1.
                                         vlanTrunkTable 1.3.6.1.4.1.171.10.76.39.1.36.1.2 no-access
This table is used to manage the VLAN trunking feature of the device.
                                             vlanTrunkEntry 1.3.6.1.4.1.171.10.76.39.1.36.1.2.1 no-access
There is one entry in this table for each created port-channel port.
                                                 vlanTrunkIfIndex 1.3.6.1.4.1.171.10.76.39.1.36.1.2.1.1 interfaceindex read-only
The index of the port.
                                                 vlanTrunkState 1.3.6.1.4.1.171.10.76.39.1.36.1.2.1.2 integer read-write
Sets the VLAN trunk status as enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                               companyTimeRangeMgmt 1.3.6.1.4.1.171.10.76.39.1.38
                                     swTimeRangeSettingTable 1.3.6.1.4.1.171.10.76.39.1.38.1 no-access
A table to configure time Range in the system.
                                         swTimeRangeSettingEntry 1.3.6.1.4.1.171.10.76.39.1.38.1.1 no-access
A schedule entry to configure time Range in the system.
                                             swTimeRangeIndex 1.3.6.1.4.1.171.10.76.39.1.38.1.1.1 integer32 read-only
The Time Range identifier. The maximum number of Schedule entry is the number of ports supported PoE function. The value must be between 1 and 52.
                                             swTimeRangeName 1.3.6.1.4.1.171.10.76.39.1.38.1.1.2 displaystring read-write
The Schedule name associated with the Schedule entry (e.g., `abc, bbb').
                                             swTimeRangeDate 1.3.6.1.4.1.171.10.76.39.1.38.1.1.3 integer read-write
Enable/Disable date range checking while executing time base PoE. Enumeration: 'disabled': 2, 'enabled': 1.
                                             swTimeRangeStartYear 1.3.6.1.4.1.171.10.76.39.1.38.1.1.4 integer read-write
Start year of the Schedule entry. Enumeration: 'y2033': 2033, 'y2032': 2032, 'y2031': 2031, 'y2016': 2016, 'y2028': 2028, 'y2029': 2029, 'y2024': 2024, 'y2025': 2025, 'y2026': 2026, 'y2027': 2027, 'y2020': 2020, 'y2021': 2021, 'y2022': 2022, 'y2023': 2023, 'y2035': 2035, 'y2034': 2034, 'y2037': 2037, 'y2015': 2015, 'y2014': 2014, 'y2017': 2017, 'y2030': 2030, 'y2011': 2011, 'y2010': 2010, 'y2013': 2013, 'y2012': 2012, 'y2036': 2036, 'y2009': 2009, 'y2019': 2019, 'y2018': 2018.
                                             swTimeRangeStartMonth 1.3.6.1.4.1.171.10.76.39.1.38.1.1.5 integer read-write
Start month of the Schedule entry. Enumeration: 'february': 2, 'october': 10, 'march': 3, 'august': 8, 'september': 9, 'may': 5, 'january': 1, 'june': 6, 'april': 4, 'december': 12, 'july': 7, 'november': 11.
                                             swTimeRangeStartDay 1.3.6.1.4.1.171.10.76.39.1.38.1.1.6 integer32 read-write
Start day of the Schedule entry. The value must be from 1 to 31.
                                             swTimeRangeStartHour 1.3.6.1.4.1.171.10.76.39.1.38.1.1.7 integer32 read-write
Start hour of the Schedule entry. The value must be from 0 to 23.
                                             swTimeRangeStartMinute 1.3.6.1.4.1.171.10.76.39.1.38.1.1.8 integer32 read-write
Start minute of the Schedule entry. The value must be from 0 to 59.
                                             swTimeRangeEndYear 1.3.6.1.4.1.171.10.76.39.1.38.1.1.9 integer read-write
End year of the Schedule entry. Enumeration: 'y2033': 2033, 'y2032': 2032, 'y2031': 2031, 'y2016': 2016, 'y2028': 2028, 'y2029': 2029, 'y2024': 2024, 'y2025': 2025, 'y2026': 2026, 'y2027': 2027, 'y2020': 2020, 'y2021': 2021, 'y2022': 2022, 'y2023': 2023, 'y2035': 2035, 'y2034': 2034, 'y2037': 2037, 'y2015': 2015, 'y2014': 2014, 'y2017': 2017, 'y2030': 2030, 'y2011': 2011, 'y2010': 2010, 'y2013': 2013, 'y2012': 2012, 'y2036': 2036, 'y2009': 2009, 'y2019': 2019, 'y2018': 2018.
                                             swTimeRangeEndMonth 1.3.6.1.4.1.171.10.76.39.1.38.1.1.10 integer read-write
End month of the Schedule entry. Enumeration: 'february': 2, 'october': 10, 'march': 3, 'august': 8, 'september': 9, 'may': 5, 'january': 1, 'june': 6, 'april': 4, 'december': 12, 'july': 7, 'november': 11.
                                             swTimeRangeEndDay 1.3.6.1.4.1.171.10.76.39.1.38.1.1.11 integer32 read-write
End day of the Schedule entry. The value must be from 1 to 31.
                                             swTimeRangeEndHour 1.3.6.1.4.1.171.10.76.39.1.38.1.1.12 integer32 read-write
End hour of the Schedule entry. The value must be from 0 to 23.
                                             swTimeRangeEndMinute 1.3.6.1.4.1.171.10.76.39.1.38.1.1.13 integer32 read-write
End minute of the Schedule entry. The value must be from 0 to 59.
                                             swTimeRangeMonday 1.3.6.1.4.1.171.10.76.39.1.38.1.1.14 integer read-write
Enable/Disble scheduling Monday. Enumeration: 'enable': 1, 'disable': 2.
                                             swTimeRangeTuesday 1.3.6.1.4.1.171.10.76.39.1.38.1.1.15 integer read-write
Enable/Disble scheduling Tuesday. Enumeration: 'enable': 1, 'disable': 2.
                                             swTimeRangeWednesday 1.3.6.1.4.1.171.10.76.39.1.38.1.1.16 integer read-write
Enable/Disble scheduling Wednesday. Enumeration: 'enable': 1, 'disable': 2.
                                             swTimeRangeThursday 1.3.6.1.4.1.171.10.76.39.1.38.1.1.17 integer read-write
Enable/Disble scheduling Thursday. Enumeration: 'enable': 1, 'disable': 2.
                                             swTimeRangeFriday 1.3.6.1.4.1.171.10.76.39.1.38.1.1.18 integer read-write
Enable/Disble scheduling Friday. Enumeration: 'enable': 1, 'disable': 2.
                                             swTimeRangeSaturday 1.3.6.1.4.1.171.10.76.39.1.38.1.1.19 integer read-write
Enable/Disble scheduling Saturday. Enumeration: 'enable': 1, 'disable': 2.
                                             swTimeRangeSunday 1.3.6.1.4.1.171.10.76.39.1.38.1.1.20 integer read-write
Enable/Disble scheduling Sunday. Enumeration: 'enable': 1, 'disable': 2.
                                             swTimeRangeRowStatus 1.3.6.1.4.1.171.10.76.39.1.38.1.1.21 rowstatus read-only
The status of an entry in the Time Range Information Table. Only a subset of the rowstatus variables (active, notinservice, createAndWait, destroy) are available.
                               companySMTP 1.3.6.1.4.1.171.10.76.39.1.40
                                     ipv4smtpState 1.3.6.1.4.1.171.10.76.39.1.40.1 integer read-write
Enable or Disable SMTP function. Enumeration: 'disabled': 0, 'enabled': 1.
                                     ipv4smtpServerAddr 1.3.6.1.4.1.171.10.76.39.1.40.2 ipaddress read-write
SMTP Server's IP Address
                                     ipv4smtpServerPort 1.3.6.1.4.1.171.10.76.39.1.40.3 integer read-write
SMTP Server's port
                                     ipv4smtpSelfMailAddr 1.3.6.1.4.1.171.10.76.39.1.40.4 octet string read-write
The sender's (DUT) mail address .
                                     ipv4smtpRecvMailAddrTable 1.3.6.1.4.1.171.10.76.39.1.40.5 no-access
Receivers' mail address table.
                                         ipv4smtpRecvMailAddrEntry 1.3.6.1.4.1.171.10.76.39.1.40.5.1 no-access
Receivers' mail address entry.
                                             ipv4smtpRecvMailAddrIndex 1.3.6.1.4.1.171.10.76.39.1.40.5.1.1 integer read-only
Receivers' mail address index (1~8).
                                             ipv4smtpRecvMailAddr 1.3.6.1.4.1.171.10.76.39.1.40.5.1.2 octet string read-write
Receivers' mail address.
                                             ipv4smtpRecvMailAddrStatus 1.3.6.1.4.1.171.10.76.39.1.40.5.1.3 rowstatus read-write
Rowstatus of the receiver's mail address.
                                     sysSMTPServerGroup 1.3.6.1.4.1.171.10.76.39.1.40.6
                                         smtpState 1.3.6.1.4.1.171.10.76.39.1.40.6.1 integer read-write
Enable or Disable SMTP function. Enumeration: 'disabled': 0, 'enabled': 1.
                                         smtpServerAddr 1.3.6.1.4.1.171.10.76.39.1.40.6.2 ipv6address read-write
SMTP Server's IP Address
                                         smtpServerAddrType 1.3.6.1.4.1.171.10.76.39.1.40.6.3 integer read-write
SMTP Server's Address type. Enumeration: 'iPv4': 1, 'iPv6': 2.
                                         smtpServerAddrInterfaceName 1.3.6.1.4.1.171.10.76.39.1.40.6.4 octet string read-write
Specifies the interface name when the smtpServerAddrInterfaceName is linklocal address.
                                         smtpServerPort 1.3.6.1.4.1.171.10.76.39.1.40.6.5 integer read-write
SMTP Server's port
                                         smtpSelfMailAddr 1.3.6.1.4.1.171.10.76.39.1.40.6.6 octet string read-write
The sender's (DUT) mail address .
                                         smtpRecvMailAddrTable 1.3.6.1.4.1.171.10.76.39.1.40.6.7 no-access
Receivers' mail address table.
                                             smtpRecvMailAddrEntry 1.3.6.1.4.1.171.10.76.39.1.40.6.7.1 no-access
Receivers' mail address entry.
                                                 smtpRecvMailAddrIndex 1.3.6.1.4.1.171.10.76.39.1.40.6.7.1.1 integer read-only
Receivers' mail address index (1~8).
                                                 smtpRecvMailAddr 1.3.6.1.4.1.171.10.76.39.1.40.6.7.1.2 octet string read-write
Receivers' mail address.
                                                 smtpRecvMailAddrStatus 1.3.6.1.4.1.171.10.76.39.1.40.6.7.1.3 rowstatus read-write
Rowstatus of the receiver's mail address.
                               companyMultiIPInterface 1.3.6.1.4.1.171.10.76.39.1.41
                                     ipv4multiIFInfo 1.3.6.1.4.1.171.10.76.39.1.41.1
                                         ipv4mulIfMainTable 1.3.6.1.4.1.171.10.76.39.1.41.1.1 no-access
A list of interface entries.
                                             ipv4mulIfMainEntry 1.3.6.1.4.1.171.10.76.39.1.41.1.1.1 no-access
An entry containing management information applicable to a particular interface.
                                                 ipv4mulifMainIndex 1.3.6.1.4.1.171.10.76.39.1.41.1.1.1.1 interfaceindex read-only
The index of this interface.
                                                 ipv4mulifVLANID 1.3.6.1.4.1.171.10.76.39.1.41.1.1.1.2 integer read-only
The ID of VLAN that you want this interface to be in. It must be a exist vlan id.
                                                 ipv4mulifName 1.3.6.1.4.1.171.10.76.39.1.41.1.1.1.3 octet string read-write
The Description for the interface.
                                                 ipv4mulifVLANname 1.3.6.1.4.1.171.10.76.39.1.41.1.1.1.4 octet string read-only
The vlan name for the interface.
                                                 ipv4mulifIpAddr 1.3.6.1.4.1.171.10.76.39.1.41.1.1.1.6 ipaddress read-write
The ip address of this interface.
                                                 ipv4mulifIpSubnetMask 1.3.6.1.4.1.171.10.76.39.1.41.1.1.1.7 ipaddress read-write
The subnet mask of this interface.
                                                 ipv4mulifMainAdminStatus 1.3.6.1.4.1.171.10.76.39.1.41.1.1.1.8 integer read-only
The desired state of the interface. Enumeration: 'enable': 1, 'disable': 2.
                                                 ipv4mulifMainOperStatus 1.3.6.1.4.1.171.10.76.39.1.41.1.1.1.9 integer read-only
The current operational state of the interface. Enumeration: 'linkup': 1, 'linkdown': 2.
                                                 ipv4mulifMainRowStatus 1.3.6.1.4.1.171.10.76.39.1.41.1.1.1.10 rowstatus read-only
The status of an entry in the Multi Interface Table. Only a subset of the rowstatus variables (active, createAndWait, destroy) are available.
                                     multiIFSupportV4V6Info 1.3.6.1.4.1.171.10.76.39.1.41.2
                                         mulIfSupportV4V6MainTable 1.3.6.1.4.1.171.10.76.39.1.41.2.1 no-access
A list of interface entries.
                                             mulIfSupportV4V6MainEntry 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1 no-access
An entry containing management information applicable to a particular interface.
                                                 mulifMainIndex 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.1 interfaceindex read-only
The index of this interface.
                                                 mulifVLANID 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.2 integer read-only
The ID of VLAN that you want this interface to be in. It must be a exist vlan id.
                                                 mulifName 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.3 octet string read-write
The Description for the interface.
                                                 mulifVLANname 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.4 octet string read-only
The vlan name for the interface.
                                                 mulifIpAddr 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.5 ipaddress read-only
The ip address of this interface.
                                                 mulifIpSubnetMask 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.6 ipaddress read-only
The subnet mask of this interface.
                                                 mulifMainAdminStatus 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.7 integer read-only
The desired state of the interface. Enumeration: 'enable': 1, 'disable': 2.
                                                 mulifMainOperStatus 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.8 integer read-only
The current operational state of the interface. Enumeration: 'linkup': 1, 'linkdown': 2.
                                                 mulifv6GlobalStatus 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.9 integer read-only
The ID of VLAN that you want this interface to be in. It must be a exist vlan id. Enumeration: 'enable': 1, 'disable': 2.
                                                 mulifv6DHCPStatus 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.10 integer read-only
The state of DHCPv6 that you want this interface to be in. It must be a exist vlan id. Enumeration: 'enable': 1, 'disable': 2.
                                                 mulifv6AutolinkloStatus 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.11 integer read-only
The global state of link local that you want this interface to be in. It must be a exist vlan id. Enumeration: 'enable': 1, 'disable': 2.
                                                 mulifv6NSRetransmitTime 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.12 integer read-only
The NS's retransmit time that you want this interface to be in. It must be a exist vlan id.
                                                 mulifMainRowStatus 1.3.6.1.4.1.171.10.76.39.1.41.2.1.1.13 rowstatus read-only
The status of an entry in the Multi Interface Table. Only a subset of the rowstatus variables (active, createAndWait, destroy) are available.
                                         mulIfV6AddressTable 1.3.6.1.4.1.171.10.76.39.1.41.2.2 no-access
A list of interface entries.
                                             mulIfV6AddressEntry 1.3.6.1.4.1.171.10.76.39.1.41.2.2.1 no-access
An entry containing management information applicable to a particular interface.
                                                 mulifV6AddressMainIndex 1.3.6.1.4.1.171.10.76.39.1.41.2.2.1.1 interfaceindex read-only
The index of this IPv6 entry.
                                                 mulifV6AddressIpAddr 1.3.6.1.4.1.171.10.76.39.1.41.2.2.1.2 ipv6address read-only
The ip address of this IPv6 entry.
                                                 mulifV6AddressIpPrefix 1.3.6.1.4.1.171.10.76.39.1.41.2.2.1.3 integer read-only
The ip prefix of this IPv6 entry.
                                                 mulifV6AddressIpType 1.3.6.1.4.1.171.10.76.39.1.41.2.2.1.4 integer read-only
The ip type of this IPv6 entry. Enumeration: 'unicast': 1, 'linklocal': 3, 'anycast': 2.
                                                 mulifV6AddressRowStatus 1.3.6.1.4.1.171.10.76.39.1.41.2.2.1.5 rowstatus read-only
The status of an entry in the Multi Interface Table. Only a subset of the rowstatus variables (active, createAndWait, destroy) are available.
                               companyLimitIp 1.3.6.1.4.1.171.10.76.39.1.45
                                     limitIpMulticastProfileTable 1.3.6.1.4.1.171.10.76.39.1.45.1 no-access
A list of the limit ip multicast Profile Table.
                                         limitIpMulticastProfileEntry 1.3.6.1.4.1.171.10.76.39.1.45.1.1 no-access
A limit ip multicast entry maintain by the start IP Address, end ip address, profile id.
                                             limitIpMulticastIPType 1.3.6.1.4.1.171.10.76.39.1.45.1.1.1 integer read-only
Indicate the IP type of profile. Enumeration: 'ipv4': 1, 'ipv6': 2.
                                             limitIpMulticastProfileID 1.3.6.1.4.1.171.10.76.39.1.45.1.1.2 integer read-only
The ProfileID of the limit ip multicast profile entry.
                                             limitIpMulticastProfileName 1.3.6.1.4.1.171.10.76.39.1.45.1.1.3 displaystring read-write
The ProfileName of the limit ip multicast profile entry.
                                             limitIpMulticastProfileStatus 1.3.6.1.4.1.171.10.76.39.1.45.1.1.4 rowstatus read-write
The status of an entry in the limit ip multicast profile Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
                                     limitIpMulticastEntryTable 1.3.6.1.4.1.171.10.76.39.1.45.2 no-access
A list of the limit ip multicast entry Table.
                                         limitIpMulticastEntry 1.3.6.1.4.1.171.10.76.39.1.45.2.1 no-access
A limit ip multicast entry maintain by the start IP Address, end ip address, profile id.
                                             limitIpMulticastEntryIPType 1.3.6.1.4.1.171.10.76.39.1.45.2.1.1 integer read-only
Indicate the IP type of entry. Enumeration: 'ipv4': 1, 'ipv6': 2.
                                             limitIpMulticastEntryProfileID 1.3.6.1.4.1.171.10.76.39.1.45.2.1.2 integer read-only
The ProfileID of the limit ip multicast entry.
                                             limitIpMulticaststartIpAddr 1.3.6.1.4.1.171.10.76.39.1.45.2.1.3 displaystring read-only
The limit ip multicast IP address is used to set start ip
                                             limitIpMulticastendIpAddr 1.3.6.1.4.1.171.10.76.39.1.45.2.1.4 displaystring read-only
The limit ip multicast IP address is used to set end ip
                                             limitIpMulticastStatus 1.3.6.1.4.1.171.10.76.39.1.45.2.1.5 rowstatus read-write
The status of an entry in the limit ip multicast entry Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
                                     limitIpMulticastPortTable 1.3.6.1.4.1.171.10.76.39.1.45.3 no-access
A list of the limit ip multicast Port entry Table.
                                         limitIpMulticastPortEntry 1.3.6.1.4.1.171.10.76.39.1.45.3.1 no-access
A limit ip multicast entry maintain by the Port Index.
                                             limitIpMulticastPortIPType 1.3.6.1.4.1.171.10.76.39.1.45.3.1.1 integer read-only
Indicate the IP type of entry. Enumeration: 'ipv4': 1, 'ipv6': 2.
                                             limitIpMulticastPortID 1.3.6.1.4.1.171.10.76.39.1.45.3.1.2 integer read-only
The Port Index of the limit ip multicast port entry. For all machines give maximum port number.
                                             limitIpMulticastPortState 1.3.6.1.4.1.171.10.76.39.1.45.3.1.3 integer read-write
The limit ip multicast port state Enumeration: 'deny': 2, 'permit': 1.
                                             limitIpMulticastPortProfileID 1.3.6.1.4.1.171.10.76.39.1.45.3.1.4 portlist read-write
The limit ip multicast port mapping profileID list.
                                             limitIpMulticastPortMaxGrp 1.3.6.1.4.1.171.10.76.39.1.45.3.1.5 integer read-write
The limit ip multicast per-port max group.
                               companyGratuitousARP 1.3.6.1.4.1.171.10.76.39.1.48
                                     sysGratuitousARPGlobalSettings 1.3.6.1.4.1.171.10.76.39.1.48.1
                                         sysGratuitousARPIPIfStatusUp 1.3.6.1.4.1.171.10.76.39.1.48.1.1 integer read-write
This object indicates Send On IP Interface Status Up is enabled or disabled. Enumeration: 'enable': 1, 'disable': 2.
                                         sysGratuitousARPDuplicateIPDetected 1.3.6.1.4.1.171.10.76.39.1.48.1.2 integer read-write
This object indicates Send On Duplicate IP Detected is enabled or disabled. Enumeration: 'enable': 1, 'disable': 2.
                                         sysGratuitousARPLearning 1.3.6.1.4.1.171.10.76.39.1.48.1.3 integer read-write
This object indicates Gratuitous ARP Learning is enabled or disabled. Enumeration: 'enable': 1, 'disable': 2.
                                     sysGratuitousARPSettings 1.3.6.1.4.1.171.10.76.39.1.48.2
                                         sysGratuitousARPTable 1.3.6.1.4.1.171.10.76.39.1.48.2.1 no-access
Set/Add Gratuitous ARP interface name and interval time.
                                             sysGratuitousARPEntry 1.3.6.1.4.1.171.10.76.39.1.48.2.1.1 no-access
The entry of gratuitous ARP!
                                                 sysGratuitousARPIFName 1.3.6.1.4.1.171.10.76.39.1.48.2.1.1.1 octet string read-only
Interface name.
                                                 sysGratuitousARPInterval 1.3.6.1.4.1.171.10.76.39.1.48.2.1.1.2 integer32 read-write
Gratuitous ARP interval time for each interface.
                               companyNeighbor 1.3.6.1.4.1.171.10.76.39.1.50
                                     neighborTable 1.3.6.1.4.1.171.10.76.39.1.50.1 no-access
A list of the Neighbor Cache Table.
                                         neighborEntry 1.3.6.1.4.1.171.10.76.39.1.50.1.1 no-access
A Neighbor cache entry containing the ifindex and ipv6 addr.
                                             neighborIfindex 1.3.6.1.4.1.171.10.76.39.1.50.1.1.1 integer read-only
The interface index of the Neighbor entry. Must be conform to the existing interface name.
                                             neighborIPv6Addr 1.3.6.1.4.1.171.10.76.39.1.50.1.1.2 ipv6address read-only
Allows the entry of an IP address that will be a Neighbor entry into the Neighbor Cache Table.
                                             neighborMACAddr 1.3.6.1.4.1.171.10.76.39.1.50.1.1.3 macaddress read-only
The MAC address associated of the Neighbor entry.
                                             neighborType 1.3.6.1.4.1.171.10.76.39.1.50.1.1.4 integer read-only
The type associated of the Neighbor entry. Enumeration: 'dynamic': 2, 'static': 1.
                                             neighborCacheState 1.3.6.1.4.1.171.10.76.39.1.50.1.1.5 integer read-only
The type associated of the Neighbor entry. Enumeration: 'probe': 6, 'notinservice': 7, 'delay': 5, 'reachable': 2, 'static': 1, 'stale': 4, 'incomplete': 3.
                                             neighborActiveStatus 1.3.6.1.4.1.171.10.76.39.1.50.1.1.6 integer read-only
The active status of the Neighbor entry. Enumeration: 'active': 1, 'inactive': 2.
                                             neighborRowStatus 1.3.6.1.4.1.171.10.76.39.1.50.1.1.7 rowstatus read-write
The status of an entry in the Neighbor Cache Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available.
                               companyEoam 1.3.6.1.4.1.171.10.76.39.1.51
                                     eoamSystem 1.3.6.1.4.1.171.10.76.39.1.51.1
                                         eoamTable 1.3.6.1.4.1.171.10.76.39.1.51.1.2 no-access
A table that contains EOAM mode information about each port.
                                             eoamEntry 1.3.6.1.4.1.171.10.76.39.1.51.1.2.1 no-access
A list of EOAM mode information for each port.
                                                 eoamIfIndex 1.3.6.1.4.1.171.10.76.39.1.51.1.2.1.1 interfaceindex read-only
The index of the port.
                                                 eoamState 1.3.6.1.4.1.171.10.76.39.1.51.1.2.1.2 integer read-write
Sets the EOAM state enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 eoamMode 1.3.6.1.4.1.171.10.76.39.1.51.1.2.1.3 integer read-write
Sets the EOAM mode as active or passive. Enumeration: 'passive': 1, 'active': 2.
                                                 eoamReceivedRemoteLoopback 1.3.6.1.4.1.171.10.76.39.1.51.1.2.1.4 integer read-write
Sets the EOAM received or ignore remote loopback packets. Enumeration: 'ignore': 1, 'process': 2.
                                                 eoamRemoteLoopback 1.3.6.1.4.1.171.10.76.39.1.51.1.2.1.5 integer read-write
Sets the EOAM remote loopback start or stop. Enumeration: 'remoteLoopBack': 3, 'noLoopBack': 1, 'startLoopBack': 2, 'stopLoopBack': 4, 'unknownLoopBack': 6, 'localLoopBack': 5.
                                                 eoamDyingGaspEnable 1.3.6.1.4.1.171.10.76.39.1.51.1.2.1.6 integer read-write
Sets the EOAM dying gasp state enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 eoamCriticalEventEnable 1.3.6.1.4.1.171.10.76.39.1.51.1.2.1.7 integer read-write
Sets the EOAM critical event state enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                     eoamLinkMonitor 1.3.6.1.4.1.171.10.76.39.1.51.2
                                         eoamLinkMonitorTable 1.3.6.1.4.1.171.10.76.39.1.51.2.1 no-access
A table that contains EOAM link monitor information about each port.
                                             eoamLinkMonitorEntry 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1 no-access
A list of EOAM link monitor information for each port.
                                                 eoamLinkMonitorIfIndex 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.1 interfaceindex read-only
The index of the port.
                                                 errorSymbolNotifyState 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.2 integer read-write
Sets the EOAM error symbol notify state enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 errorSymbolThreshold 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.3 unsigned32 read-write
Sets the EOAM error symbol threshold.
                                                 errorSymbolWindow 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.4 unsigned32 read-write
Sets the EOAM error symbol window.
                                                 errorFrameNotifyState 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.5 integer read-write
Sets the EOAM error frame notify state enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 errorFrameThreshold 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.6 unsigned32 read-write
Sets the EOAM error frame threshold.
                                                 errorFrameWindow 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.7 unsigned32 read-write
Sets the EOAM error symbol window.
                                                 errorFrameSecondsNotifyState 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.8 integer read-write
Sets the EOAM error symbol notify state enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 errorFrameSecondsThreshold 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.9 unsigned32 read-write
Sets the EOAM error symbol threshold.
                                                 errorFrameSecondsWindow 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.10 unsigned32 read-write
Sets the EOAM error symbol window.
                                                 errorFramePeriodNotifyState 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.11 integer read-write
Sets the EOAM error symbol notify state enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 errorFramePeriodThreshold 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.12 unsigned32 read-write
Sets the EOAM error symbol threshold.
                                                 errorFramePeriodWindow 1.3.6.1.4.1.171.10.76.39.1.51.2.1.1.13 unsigned32 read-write
Sets the EOAM error symbol window.
                               companyDuld 1.3.6.1.4.1.171.10.76.39.1.52
                                     duldSystem 1.3.6.1.4.1.171.10.76.39.1.52.1
                                         duldTable 1.3.6.1.4.1.171.10.76.39.1.52.1.1 no-access
A table that contains DULD mode information about each port.
                                             duldEntry 1.3.6.1.4.1.171.10.76.39.1.52.1.1.1 no-access
A list of DULD mode information for each port.
                                                 duldIfIndex 1.3.6.1.4.1.171.10.76.39.1.52.1.1.1.1 interfaceindex read-only
The index of the port.
                                                 duldState 1.3.6.1.4.1.171.10.76.39.1.52.1.1.1.2 integer read-write
Sets the DULD admin state enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 duldOperState 1.3.6.1.4.1.171.10.76.39.1.52.1.1.1.3 integer read-only
Gets the DULD Oper state enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 duldMode 1.3.6.1.4.1.171.10.76.39.1.52.1.1.1.4 integer read-write
Sets the DULD mode as shutdown or normal. Enumeration: 'shutdown': 1, 'normal': 2.
                                                 duldLinkStatus 1.3.6.1.4.1.171.10.76.39.1.52.1.1.1.5 integer read-only
Gets the DULD link status. Enumeration: 'bidirectional': 2, 'linkDown': 5, 'rxFault': 4, 'unknow': 1, 'txFault': 3.
                                                 duldDiscoveryTime 1.3.6.1.4.1.171.10.76.39.1.52.1.1.1.6 unsigned32 read-write
Sets the DULD discovery time.
                                         duldRecoverTime 1.3.6.1.4.1.171.10.76.39.1.52.1.2 unsigned32 read-write
Duld auto recover time.
                               companydot3azEEE 1.3.6.1.4.1.171.10.76.39.1.53
                                     dot3azEEEset 1.3.6.1.4.1.171.10.76.39.1.53.1
                                         dot3azTable 1.3.6.1.4.1.171.10.76.39.1.53.1.1 no-access
A table to control IEEE802.3az EEE settings features of the device.
                                             dot3azEntry 1.3.6.1.4.1.171.10.76.39.1.53.1.1.1 no-access
An entry appears in IEEE802.3az EEE table for each interface in the system.
                                                 portD3Index 1.3.6.1.4.1.171.10.76.39.1.53.1.1.1.1 integer32 read-only
The interface index for which the configuration in this entry applies. For all machines give maximum port number.
                                                 portD3State 1.3.6.1.4.1.171.10.76.39.1.53.1.1.1.2 integer read-write
Enable / disable port IEEE802.3az EEE admin state for the interface. A given ports' dynamic MAC address learning will be stopped such that the current source MAC addresses entered into the MAC address forwarding table can not be changed once the port security admin state is enabled. Enumeration: 'disabled': 2, 'notsupported': 3, 'enabled': 1.
                               companyMacAuthGroup 1.3.6.1.4.1.171.10.76.39.1.54
                                     macBasedCtrlGroup 1.3.6.1.4.1.171.10.76.39.1.54.1
                                         macBasedCtrlState 1.3.6.1.4.1.171.10.76.39.1.54.1.1 integer read-write
Enable/Disable MAC-based Access Control Global Settings. Enumeration: 'disabled': 2, 'enabled': 1.
                                         macBasedMethod 1.3.6.1.4.1.171.10.76.39.1.54.1.2 integer read-write
Select MAC-based Access Control Methods. Enumeration: 'local': 2, 'radius': 1.
                                         macBasedRadiusPassword 1.3.6.1.4.1.171.10.76.39.1.54.1.3 displaystring read-write
Set the password about the method Mac-Based Authentication, the maximum length are 32 chars.
                                         macBasedRadiusAuthStatus 1.3.6.1.4.1.171.10.76.39.1.54.1.4 integer read-write
The state of Radius Authorization. Enumeration: 'enable': 1, 'disable': 2.
                                         macBasedLocalAuthStatus 1.3.6.1.4.1.171.10.76.39.1.54.1.5 integer read-write
The state of Local Authorization. Enumeration: 'enable': 1, 'disable': 2.
                                         macBasedTrapStatus 1.3.6.1.4.1.171.10.76.39.1.54.1.6 integer read-write
The state of Trap of MAC-based Authorization. Enumeration: 'enable': 1, 'disable': 2.
                                         macBasedLogStatus 1.3.6.1.4.1.171.10.76.39.1.54.1.7 integer read-write
Enumeration: 'enable': 1, 'disable': 2.
                                         macBasedMaxUsr 1.3.6.1.4.1.171.10.76.39.1.54.1.8 integer32 read-write
                                         macBasedPortCtrlTable 1.3.6.1.4.1.171.10.76.39.1.54.1.11 no-access
                                               macBasedPortCtrlEntry 1.3.6.1.4.1.171.10.76.39.1.54.1.11.1 no-access
                                                   macBasedPortCtrlIndex 1.3.6.1.4.1.171.10.76.39.1.54.1.11.1.1 integer32 read-only
                                                   macBasedPortCtrlState 1.3.6.1.4.1.171.10.76.39.1.54.1.11.1.2 integer read-only
Enumeration: 'enable': 1, 'disable': 2.
                                                   macBasedPortCtrlAgingTime 1.3.6.1.4.1.171.10.76.39.1.54.1.11.1.3 integer32 read-write
                                                   macBasedPortCtrlBlockTime 1.3.6.1.4.1.171.10.76.39.1.54.1.11.1.4 integer32 read-write
                                     macBasedCtrlLocalGroup 1.3.6.1.4.1.171.10.76.39.1.54.2
                                         macBasedCtrlLocalTable 1.3.6.1.4.1.171.10.76.39.1.54.2.1 no-access
                                             macBasedCtrlLocalEntry 1.3.6.1.4.1.171.10.76.39.1.54.2.1.1 no-access
                                                 macBasedCtrlLocalMacAddress 1.3.6.1.4.1.171.10.76.39.1.54.2.1.1.1 macaddress read-only
The MacAddress of the MAC-based Access Control Local Setting Table.
                                                 macBasedCtrlLocalVID 1.3.6.1.4.1.171.10.76.39.1.54.2.1.1.2 integer read-only
The VLAN ID of the MAC-based Access Control Local Setting entry.
                                                 macBasedCtrlLocalVlanName 1.3.6.1.4.1.171.10.76.39.1.54.2.1.1.3 snmpadminstring read-only
An administratively assigned string, which may be used to identify the VLAN.
                                                 macBasedCtrlLocalRowStatus 1.3.6.1.4.1.171.10.76.39.1.54.2.1.1.4 rowstatus read-write
The Row status of an entry in the MAC-based Access Control Local Setting Table. Only a subset of the rowstatus variables (active, createAndGo, destroy) are available
                                     macBasedCtrlAuthGroup 1.3.6.1.4.1.171.10.76.39.1.54.3
                                         macBasedCtrlAuthTable 1.3.6.1.4.1.171.10.76.39.1.54.3.1 no-access
                                             macBasedCtrlAuthEntry 1.3.6.1.4.1.171.10.76.39.1.54.3.1.1 no-access
                                                 macBasedCtrlAuthPort 1.3.6.1.4.1.171.10.76.39.1.54.3.1.1.1 integer32 read-only
For all machines give maximum port number.
                                                 macBasedCtrlAuthMacAddress 1.3.6.1.4.1.171.10.76.39.1.54.3.1.1.2 macaddress read-only
The MacAddress of the MAC-based Access Control Authentication State Table.
                                                 macBasedCtrlAuthRxVID 1.3.6.1.4.1.171.10.76.39.1.54.3.1.1.3 integer read-only
                                                 macBasedCtrlAuthState 1.3.6.1.4.1.171.10.76.39.1.54.3.1.1.4 integer read-only
Enumeration: 'authenticated': 2, 'authenticating': 1, 'blocked': 3.
                                                 macBasedCtrlAuthVID 1.3.6.1.4.1.171.10.76.39.1.54.3.1.1.5 integer read-only
                                                 macBasedCtrlAuthPriority 1.3.6.1.4.1.171.10.76.39.1.54.3.1.1.6 integer read-only
                                                 macBasedCtrlAuthAgingTime 1.3.6.1.4.1.171.10.76.39.1.54.3.1.1.7 integer read-only
                                                 macBasedCtrlAuthBlockTime 1.3.6.1.4.1.171.10.76.39.1.54.3.1.1.8 integer read-only
                               companyWACAuthGroup 1.3.6.1.4.1.171.10.76.39.1.55
                                     wacAuthCtrl 1.3.6.1.4.1.171.10.76.39.1.55.1
                                         wacStatus 1.3.6.1.4.1.171.10.76.39.1.55.1.1 integer read-write
Enable/Disable WAC Global Settings Enumeration: 'disabled': 2, 'enabled': 1.
                                         wacVirtualIPv4 1.3.6.1.4.1.171.10.76.39.1.55.1.2 ipaddress read-write
Virtual IPv4
                                         wacVirtualIPv6 1.3.6.1.4.1.171.10.76.39.1.55.1.3 ipv6address read-write
Virtual IPv6
                                         wacRedirPath 1.3.6.1.4.1.171.10.76.39.1.55.1.4 octet string read-write
Redirection Path
                                         wacClrRedirPath 1.3.6.1.4.1.171.10.76.39.1.55.1.5 integer read-write
yes/no WAC Clear Redirection path Settings Enumeration: 'yes': 1, 'no': 2.
                                         wacRadiusAuth 1.3.6.1.4.1.171.10.76.39.1.55.1.6 integer read-write
Enable/Disable WAC RADIUS AUTH Settings Enumeration: 'disabled': 2, 'enabled': 1.
                                         waclocalAuth 1.3.6.1.4.1.171.10.76.39.1.55.1.7 integer read-write
Enable/Disable WAC LOCAL AUTH Settings Enumeration: 'disabled': 2, 'enabled': 1.
                                         wacAuthMethod 1.3.6.1.4.1.171.10.76.39.1.55.1.8 integer read-write
Enable/Disable WAC Auth Method Settings Enumeration: 'local': 2, 'radius': 1.
                                         wacAuthPortMethod 1.3.6.1.4.1.171.10.76.39.1.55.1.9 integer read-write
Authorization Port Method Enumeration: 'http': 1, 'https': 2.
                                         wacAuthPort 1.3.6.1.4.1.171.10.76.39.1.55.1.10 integer read-write
HTTP(s) Port.
                                     wacUsrCtrl 1.3.6.1.4.1.171.10.76.39.1.55.2
                                         wacUsrCtrlTable 1.3.6.1.4.1.171.10.76.39.1.55.2.1 no-access
A table that contains the configuration objects for the Authenticator PAE associated with each port. An entry appears in this table for each port that may authenticate access to itself.
                                             wacUsrCtrlEntry 1.3.6.1.4.1.171.10.76.39.1.55.2.1.1 no-access
The configuration information for an Authenticator Port.
                                                 authUserName 1.3.6.1.4.1.171.10.76.39.1.55.2.1.1.1 snmpadminstring read-only
The unique index value of a row in this table. This object is used to set 802.1X Local user name, The following characters are allowed to input: semicolon, question mark, space, and double quotation mark.
                                                 authUserVID 1.3.6.1.4.1.171.10.76.39.1.55.2.1.1.2 integer read-write
The ID of VLAN that you want this interface to be in. It must be a exist vlan id.
                                                 authUserPassword 1.3.6.1.4.1.171.10.76.39.1.55.2.1.1.3 displaystring read-write
This object is used to set 802.1X Local user Password, The following characters are allowed to input: semicolon, question mark, space, and double quotation mark.
                                                 authUserStatus 1.3.6.1.4.1.171.10.76.39.1.55.2.1.1.4 rowstatus read-only
The status of this conceptual row in the swAuthUserTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The swAuthUserName objects must be explicitly set.
                                     wacPortCtrl 1.3.6.1.4.1.171.10.76.39.1.55.3
                                         wacPortCtrlTable 1.3.6.1.4.1.171.10.76.39.1.55.3.1 no-access
A table to control the port specific parameters of the device like speed, duplex mode, etc.
                                             wacPortCtrlEntry 1.3.6.1.4.1.171.10.76.39.1.55.3.1.1 no-access
An entry appears in this table for each interface in the system. Index to the table is the interface index of the port.
                                                 wacPortCtrlIndex 1.3.6.1.4.1.171.10.76.39.1.55.3.1.1.1 integer32 read-only
Interface index of the port for the configuration in this entry applies.
                                                 wacPortCtrlState 1.3.6.1.4.1.171.10.76.39.1.55.3.1.1.2 integer read-write
Enables / disables flow control for the interface. Enumeration: 'enable': 1, 'disable': 2.
                                                 wacPortCtrlAgetime 1.3.6.1.4.1.171.10.76.39.1.55.3.1.1.3 integer read-write
Aging time
                                                 wacPortCtrlBlocktime 1.3.6.1.4.1.171.10.76.39.1.55.3.1.1.4 integer read-write
Aging time
                                     wacAuthState 1.3.6.1.4.1.171.10.76.39.1.55.4
                                         wacAuthStateTable 1.3.6.1.4.1.171.10.76.39.1.55.4.1 no-access
A list of the Auth States
                                             wacAuthStateEntry 1.3.6.1.4.1.171.10.76.39.1.55.4.1.1 no-access
A Auth State entry containing the mac and forwarding port.
                                                 wacAuthStatePort 1.3.6.1.4.1.171.10.76.39.1.55.4.1.1.1 integer read-only
The auth port state of the Auth State entry. For all machines give maximum port number.
                                                 wacAuthStateMac 1.3.6.1.4.1.171.10.76.39.1.55.4.1.1.2 macaddress read-only
The auth state mac of the Auth State entry.
                                                 wacAuthStateRXVID 1.3.6.1.4.1.171.10.76.39.1.55.4.1.1.3 integer read-only
The Rx VID of the Auth State entry.
                                                 wacAuthStateflag 1.3.6.1.4.1.171.10.76.39.1.55.4.1.1.4 integer read-only
The auth state flag of the Auth State entry.
                                                 wacAuthStateVID 1.3.6.1.4.1.171.10.76.39.1.55.4.1.1.5 integer read-only
The auth state VID of the Auth State entry.
                                                 wacAuthAssignPriority 1.3.6.1.4.1.171.10.76.39.1.55.4.1.1.6 integer read-only
The auth assign priority of the Auth State entry.
                                                 wacAuthStateAgetime 1.3.6.1.4.1.171.10.76.39.1.55.4.1.1.7 integer read-only
The auth state age time of the Auth State entry.
                                                 wacAuthStateRowStatus 1.3.6.1.4.1.171.10.76.39.1.55.4.1.1.99 rowstatus read-only
The auth state row status.
                               companyMacBasedVlan 1.3.6.1.4.1.171.10.76.39.1.70
                                     macBasedVlanTable 1.3.6.1.4.1.171.10.76.39.1.70.1 no-access
A table that contains information on Vlan-MAC address mapping.
                                         macBasedVlanEntry 1.3.6.1.4.1.171.10.76.39.1.70.1.1 no-access
Entry that contains Vlan-MAC address mapping.
                                             vlanMacMapIndex 1.3.6.1.4.1.171.10.76.39.1.70.1.1.1 integer32 read-only
Index of cmMacBasedVlanEntry. This object indicates the mac vlan entry for which the configurations in cmMacBasedVlanEntry is to be done.
                                             vlanMacMapAddr 1.3.6.1.4.1.171.10.76.39.1.70.1.1.2 macaddress read-write
The Mac address for which the Vlan mapping is present in the entry.
                                             vlanMacMapAddrMask 1.3.6.1.4.1.171.10.76.39.1.70.1.1.3 macaddress read-write
The Mac address for which the Vlan mapping is present in the entry.
                                             vlanMacMapVid 1.3.6.1.4.1.171.10.76.39.1.70.1.1.4 vlanindex read-write
The Vlan to which the mac address of this entry is mapped to.
                                             vlanMacStatus 1.3.6.1.4.1.171.10.76.39.1.70.1.1.5 displaystring read-only
The status given to the mac-vlan entry.
                                             vlanMacType 1.3.6.1.4.1.171.10.76.39.1.70.1.1.6 displaystring read-only
The type given to the mac-vlan entry.
                                             vlanMacMapRowStatus 1.3.6.1.4.1.171.10.76.39.1.70.1.1.99 rowstatus read-write
The row status of the entry.
                                     macBasedVlanMethod 1.3.6.1.4.1.171.10.76.39.1.70.2 integer read-write
A method of Vlan-MAC address mapping. Enumeration: 'single': 1, 'range': 2.
                               companyBPDUAttack 1.3.6.1.4.1.171.10.76.39.1.77
                                     sysBPDUAttackStateEnable 1.3.6.1.4.1.171.10.76.39.1.77.1 integer read-write
Use this to enable BPDU attack protection. The BPDU Attack Protection function and Spanning Tree Protocol for ports are mutually exclusive. When the STP function is enabled on a particular port, BPDU Attack Protection cannot be enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                     sysBPDUAttackRecoverTime 1.3.6.1.4.1.171.10.76.39.1.77.2 integer32 read-write
When a port enters under attack state, it can be disabled or blocked based on the configuration. The state can be recovered manually or by the auto recovery mechanism. This command is used to configure the auto-recovery timer. To manually recover the port, the user needs to disable and re-enable the port.
                                     sysBPDUAttackCtrlTable 1.3.6.1.4.1.171.10.76.39.1.77.3 no-access
A table to control BPDU Attack features either for the entire switch or for each interface in the switch.
                                         sysBPDUAttackCtrlEntry 1.3.6.1.4.1.171.10.76.39.1.77.3.1 no-access
An entry appears in this table for each interface in the system.
                                             sysBPDUAttackCtrlIndex 1.3.6.1.4.1.171.10.76.39.1.77.3.1.1 integer32 read-only
The interface index of the port for which the configuration in this entry applies. For all machines give maximum port number.
                                             sysBPDUAttackPortState 1.3.6.1.4.1.171.10.76.39.1.77.3.1.2 integer read-write
Used to configure the BPDU Attack Protection state of a port. The default state is disable. Enumeration: 'disabled': 2, 'enabled': 1.
                                             sysBPDUAttackPortMode 1.3.6.1.4.1.171.10.76.39.1.77.3.1.3 integer read-write
Used to configure the BPDU Attack Protection mode of a port. Enumeration: 'drop': 1, 'shutdown': 3, 'block': 2.
                                             sysBPDUAttackPortStatus 1.3.6.1.4.1.171.10.76.39.1.77.3.1.4 integer read-only
Use this to view per port BPDU attack protection status. Enumeration: 'underAttack': 2, 'normal': 1.
                                     sysBPDUAttackLog 1.3.6.1.4.1.171.10.76.39.1.77.4 integer read-write
Used to configure log settings for BPDU attack protection events. Enumeration: 'attackDetected': 2, 'both': 4, 'none': 1, 'attackCleared': 3.
                               companyDHCPv6Relay 1.3.6.1.4.1.171.10.76.39.1.86
                                     dhcpv6RelayControl 1.3.6.1.4.1.171.10.76.39.1.86.1
                                         dhcpv6RelayState 1.3.6.1.4.1.171.10.76.39.1.86.1.1 integer read-write
This object indicates DHCPv6 relay function is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                         dhcpv6RelayHopCount 1.3.6.1.4.1.171.10.76.39.1.86.1.2 integer read-write
This object indicates the maximum number of router hops that the DHCPv6 packets can cross.
                                     dhcpv6RelayManagement 1.3.6.1.4.1.171.10.76.39.1.86.2
                                         dhcpv6RelayInterfaceSettingsTable 1.3.6.1.4.1.171.10.76.39.1.86.2.1 no-access
This table indicates the IP address as a destination to forward (relay) DHCP packets to.
                                             dhcpv6RelayInterfaceSettingsEntry 1.3.6.1.4.1.171.10.76.39.1.86.2.1.1 no-access
A list of information indicates the IP address as a destination to forward (relay) DHCP packets to.
                                                 dhcpv6RelayInterface 1.3.6.1.4.1.171.10.76.39.1.86.2.1.1.1 displaystring read-only
This object indicates the maximum number of router hops that the DHCPv6 packets can cross.
                                                 dhcpv6RelayServerIP 1.3.6.1.4.1.171.10.76.39.1.86.2.1.1.2 ipv6address read-only
This object indicates the DHCP server IP address.
                                                 dhcpv6RelayInterfaceSettingsRowStatus 1.3.6.1.4.1.171.10.76.39.1.86.2.1.1.99 rowstatus read-only
This object indicates the status of this entry.
                                     dhcpv6RelayOption37 1.3.6.1.4.1.171.10.76.39.1.86.3
                                         dhcpv6RelayOption37State 1.3.6.1.4.1.171.10.76.39.1.86.3.1 integer read-write
This object indicates DHCPv6 relay option 37 function is enabled or disabled. Enumeration: 'disabled': 0, 'enabled': 1.
                                         dhcpv6RelayOption37CheckState 1.3.6.1.4.1.171.10.76.39.1.86.3.2 integer read-write
This object indicates DHCPv6 relay option 37 Check function is enabled or disabled. Enumeration: 'disabled': 0, 'enabled': 1.
                                         dhcpv6RelayOption37RemoteIDType 1.3.6.1.4.1.171.10.76.39.1.86.3.3 integer read-write
This object indicates the type of remote ID. Enumeration: 'default': 0, 'user-define': 2, 'cid-with-user-define': 1.
                                         dhcpv6RelayOption37RemoteID 1.3.6.1.4.1.171.10.76.39.1.86.3.4 displaystring read-write
This object displays the current remote ID of the device. If RemoteIDType is set to default, the value will be the MAC address of the device, and this object cannot be modified. If RemoteIDType is set to user-defined, a new value can be written to this object.
                                     dhcpv6RelayOption38 1.3.6.1.4.1.171.10.76.39.1.86.4
                                         dhcpv6RelayOpt38Table 1.3.6.1.4.1.171.10.76.39.1.86.4.1 no-access
A table to control port security features of the device.
                                             dhcpv6RelayOpt38Entry 1.3.6.1.4.1.171.10.76.39.1.86.4.1.1 no-access
An entry appears in port security table for each interface in the system.
                                                 dhcpv6RelayOpt38PortIndex 1.3.6.1.4.1.171.10.76.39.1.86.4.1.1.1 integer32 read-only
The interface index for which the configuration in this entry applies. For all machines give maximum port number.
                                                 dhcpv6RelayOpt38PortState 1.3.6.1.4.1.171.10.76.39.1.86.4.1.1.2 integer read-write
Enable / disable option 38 port state. Enumeration: 'disabled': 0, 'enabled': 1.
                                                 dhcpv6RelayOpt38PortType 1.3.6.1.4.1.171.10.76.39.1.86.4.1.1.3 integer read-write
Configure option 38 port Type. Enumeration: 'default': 0, 'user-defined': 1.
                                                 dhcpv6RelayOpt38PortID 1.3.6.1.4.1.171.10.76.39.1.86.4.1.1.4 displaystring read-write
Configure option 38 port ID. Only works when type is user-defined
                                     dhcpv6RelayOption18 1.3.6.1.4.1.171.10.76.39.1.86.5
                                         dhcpv6RelayOption18State 1.3.6.1.4.1.171.10.76.39.1.86.5.1 integer read-write
This object indicates DHCPv6 relay option 18 function is enabled or disabled. Enumeration: 'disabled': 0, 'enabled': 1.
                                         dhcpv6RelayOption18CheckState 1.3.6.1.4.1.171.10.76.39.1.86.5.2 integer read-write
This object indicates DHCPv6 relay option 18 Check function is enabled or disabled. Enumeration: 'disabled': 0, 'enabled': 1.
                                         dhcpv6RelayOption18InterfaceIDType 1.3.6.1.4.1.171.10.76.39.1.86.5.3 integer read-write
This object indicates the type of Interface ID. Enumeration: 'default': 0, 'vendor1': 2, 'cid': 1.
                               companyMldsGroup 1.3.6.1.4.1.171.10.76.39.1.88
                                     mldsSystem 1.3.6.1.4.1.171.10.76.39.1.88.1
                                         mldsStatus 1.3.6.1.4.1.171.10.76.39.1.88.1.1 integer read-write
Enables or disables MLD snooping in the system. When set to 'enabled', the MLDS module starts protocol operations. When set to 'disabled', the MLDS module stops performing protocol operations. Enumeration: 'disabled': 2, 'enabled': 1.
                                         mldsRouterPortPurgeInterval 1.3.6.1.4.1.171.10.76.39.1.88.1.2 integer32 read-write
This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, this timer runs for 'RouterPortPurgeInterval' seconds.When the timer expires, the learnt router port entry is purged. However if control messages are received from the router before the timer expiry, then the timer is restarted.
                                         mldsHostPortPurgeInterval 1.3.6.1.4.1.171.10.76.39.1.88.1.3 integer32 read-write
This is the interval (in seconds) after which a learnt port entry will be purged. For each port on which report has been received this timer runs for 'PortPurgeInterval' seconds. This timer will be restarted whenever a report message is received from a host on the specific port. If the timer expires, then , the learnt port entry will be purged from the multicast group.
                                         mldsDataDrivenLearningMaxLearnedEntryVlaue 1.3.6.1.4.1.171.10.76.39.1.88.1.8 integer read-write
The maximum data driven learning entry value.
                                     mldsVlan 1.3.6.1.4.1.171.10.76.39.1.88.3
                                         mldsVlanRouterTable 1.3.6.1.4.1.171.10.76.39.1.88.3.3 no-access
This table contains the list of ports through which a router, in a particular VLAN is reachable.
                                             mldsVlanRouterEntry 1.3.6.1.4.1.171.10.76.39.1.88.3.3.1 no-access
Contains the VLAN ID and list of ports on which routers are present in the VLAN.
                                                 mldsVlanRouterVlanId 1.3.6.1.4.1.171.10.76.39.1.88.3.3.1.1 integer32 read-only
VLAN ID of the ports through which router is reachable.
                                                 mldsVlanRouterPortList 1.3.6.1.4.1.171.10.76.39.1.88.3.3.1.2 portlist read-only
List of ports on which routers are present. These router ports are learnt through control messages received from routers, and can also be configured statically.
                                         mldsVlanFilterTable 1.3.6.1.4.1.171.10.76.39.1.88.3.4 no-access
This table contains configuration of snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system.
                                             mldsVlanFilterEntry 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1 no-access
Contains snooping status , version and fast leave configuration for a specific VLAN.
                                                 mldsVlanFilterVlanId 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.1 integer32 read-only
Index of MldsVlanFilterEntry. This object indicates the VLAN ID for which the snooping configurations in MldsVlanFilterEntry is to be done.
                                                 mldsVlanSnoopStatus 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.2 integer read-write
This object allows you to enable/disable MLDS function on a specific VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 mldsVlanQuerier 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.3 integer read-only
Indicates whether the switch is configured as a querier in the VLAN Enumeration: 'disabled': 2, 'enabled': 1.
                                                 mldsVlanCfgQuerier 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.4 integer read-write
The snooping switch can be configured as a querier via this object to send out MLD general queries when IGMP routers are not present in the VLAN. When set to 'enabled', the switch will generate general queries. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 mldsVlanQueryInterval 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.5 integer32 read-write
This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. A switch should be configured as a querier for a VLAN only when there is no queriers in the network.
                                                 mldsVlanRtrPortList 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.6 portlist read-write
List of ports which are configured statically as router ports
                                                 mldsVlanFbdRtrPortList 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.7 portlist read-write
List of ports which can be configured statically as forbidden router ports.
                                                 mldsVlanFastLeave 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.8 integer read-write
Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message, the switch checks if they are any interested receivers for the group by sending a group specific query before removing the port from the forwarding table. If set to 'enabled', the switch does not send a group specific query and immediately removes the port from the forwarding table. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 mldsVlanDataDrivenLearningStatus 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.9 integer read-write
This object allows you to enable/disable Data Driven Learning function on a specific VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 mldsVlanReportSuppression 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.10 integer read-write
Enables or disables Report suppression in the system. Enumeration: 'disabled': 2, 'enabled': 1.
                                                 mldsVlanRobustnessValue 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.11 integer32 read-write
When the switch receives leave message on a port, it sends group specific query to check if there are any other interested receivers for the group. This attribute defines the maximum number of queries sent by the switch before deleting the port from the group membership information in the forwarding database. If the maximum retry count exceeds 'mldsRobustnessValue', then the port will be deleted from the multicast group membership information in the forwarding database and received leave message will be forwarded onto the router ports if there are no interested receivers for the group.
                                                 mldsVlanGrpQueryInterval 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.12 integer32 read-write
The value of this attribute defines the time period with which the switch will send group specific queries on a port to check if there is any intersted receivers. The switch will send 'mldsRobustnessValue' queries before removing the port from the group membership information in the forwarding database.
                                                 mldsVlanQueryMaxResponseTime 1.3.6.1.4.1.171.10.76.39.1.88.3.4.1.13 integer read-write
The maximum query response time advertised in MLDv1 general queries on this interface.
                                         mldsVlanMulticastGroupTable 1.3.6.1.4.1.171.10.76.39.1.88.3.5 no-access
This table contains MAC based multicast forwarding information.
                                             mldsVlanMulticastGroupEntry 1.3.6.1.4.1.171.10.76.39.1.88.3.5.1 no-access
This table contains VLAN ID, multicast group MAC address and the list of ports onto which the multicast data packets for group should be forwarded.
                                                 mldsVlanMulticastGroupVlanId 1.3.6.1.4.1.171.10.76.39.1.88.3.5.1.1 integer32 read-only
VLAN ID pertaining to the Multicast forwarding entry
                                                 mldsVlanMulticastGroupIpAddress 1.3.6.1.4.1.171.10.76.39.1.88.3.5.1.2 inetaddress read-only
Multicast group IP address. This object indicates that a multicast group address was learned in the switch and be represented as IP address format.
                                                 mldsVlanMulticastGroupMacAddress 1.3.6.1.4.1.171.10.76.39.1.88.3.5.1.3 macaddress read-only
Multicast group MAC address. This object indicates that a multicast group address was learned in the switch and be represented as MAC address format.
                                                 mldsVlanMulticastGroupPortList 1.3.6.1.4.1.171.10.76.39.1.88.3.5.1.4 portlist read-only
List of ports onto which the multicast data packets destined for this group will be forwarded.
                                     mldsHost 1.3.6.1.4.1.171.10.76.39.1.88.4
                                         mldsHostTable 1.3.6.1.4.1.171.10.76.39.1.88.4.1 no-access
This table is used to manage the IGMP Host based Fast Leave function of the switch.
                                             mldsHostEntry 1.3.6.1.4.1.171.10.76.39.1.88.4.1.1 no-access
Contains management entities for IGMP Host based fast leave function.
                                                 mldsHostTableVLANID 1.3.6.1.4.1.171.10.76.39.1.88.4.1.1.1 integer32 read-only
VLAN ID of IPv6 Host table entry.
                                                 mldsHostTableGroupAddress 1.3.6.1.4.1.171.10.76.39.1.88.4.1.1.2 ipv6address read-only
Group address of IPv6 Host table entry.
                                                 mldsHostTablePort 1.3.6.1.4.1.171.10.76.39.1.88.4.1.1.3 integer32 read-only
Port number of IPv6 Host table entry. For all machines give maximum port number.
                                                 mldsHostTableHostIPAddress 1.3.6.1.4.1.171.10.76.39.1.88.4.1.1.4 ipv6address read-only
Host IP address of Group in IPv6 Host table entry.
                               companyPPPoE 1.3.6.1.4.1.171.10.76.39.1.98
                                     pppoeGlobalState 1.3.6.1.4.1.171.10.76.39.1.98.1 integer read-write
PPPoE global state Enumeration: 'disabled': 0, 'enabled': 1.
                                     pppoePortTable 1.3.6.1.4.1.171.10.76.39.1.98.2 no-access
A table to control PPPoE features of the device.
                                         pppoePortEntry 1.3.6.1.4.1.171.10.76.39.1.98.2.1 no-access
An entry appears in PPPoE table for each interface in the system.
                                             pppoePortIndex 1.3.6.1.4.1.171.10.76.39.1.98.2.1.1 integer32 read-only
Interface index of the port for the configuration in this entry applies.
                                             pppoePortState 1.3.6.1.4.1.171.10.76.39.1.98.2.1.2 integer read-write
PPPoE per port state Enumeration: 'disabled': 0, 'enabled': 1.
                                             pppoePortCircuitIDType 1.3.6.1.4.1.171.10.76.39.1.98.2.1.3 integer read-write
PPPoE per port circuit ID type Enumeration: 'ip': 0, 'mac': 1, 'vendor2': 3, 'udf': 2, 'vendor3': 4.
                                             pppoePortUDFString 1.3.6.1.4.1.171.10.76.39.1.98.2.1.4 displaystring read-write
PPPoE per port UDF string
                                             pppoePortCircuitIDVendor3String 1.3.6.1.4.1.171.10.76.39.1.98.2.1.5 displaystring read-write
PPPoE per port circuit ID vendor3 string
                                             pppoePortRemoteIDType 1.3.6.1.4.1.171.10.76.39.1.98.2.1.6 integer read-write
PPPoE per port remote ID type Enumeration: 'default': 0, 'vendor3': 2, 'vendor2': 1.
                                             pppoePortRemoteIDVendor3String 1.3.6.1.4.1.171.10.76.39.1.98.2.1.7 displaystring read-write
PPPoE per port remote ID vendor3 string
                               companyDoSCtrl 1.3.6.1.4.1.171.10.76.39.1.99
                                     doSCtrlTable 1.3.6.1.4.1.171.10.76.39.1.99.1 no-access
A table that holds the DoS prevention settings of the device.
                                         doSCtrlEntry 1.3.6.1.4.1.171.10.76.39.1.99.1.1 no-access
A list of DoS prevention settings of the device.
                                             doSCtrlType 1.3.6.1.4.1.171.10.76.39.1.99.1.1.1 integer read-only
This object indicates the DoS prevention type. Enumeration: 'tcp-synfin': 6, 'tcp-syn-srcport-less-1024': 7, 'tcp-xmascan': 5, 'blat-attack': 2, 'ping-death-attack': 8, 'tcp-tiny-fragment': 9, 'land-attack': 1, 'tcp-null-scan': 4.
                                             doSCtrlState 1.3.6.1.4.1.171.10.76.39.1.99.1.1.2 integer read-write
This object indicates the status of the DoS prevention type. Enumeration: 'disabled': 0, 'enabled': 1.
                                             doSCtrlActionType 1.3.6.1.4.1.171.10.76.39.1.99.1.1.3 integer read-write
This object indicates the action for the DoS prevention type. If this object is set to 'mirror' and DoSCtrlState is set to 'enable', the configuration will not take effect until a valid mirror port is specified. If mirror port is not valid the behavior will be the same as 'drop' Enumeration: 'drop': 0.
                                     dosCtrlTrapLogState 1.3.6.1.4.1.171.10.76.39.1.99.2 integer read-write
Enable/Disable Dos Trap Log function. Default is disabled. Enumeration: 'disabled': 0, 'enabled': 1.
                               companyAgentBasicInfo 1.3.6.1.4.1.171.10.76.39.1.100
                                       agentCPUutilization 1.3.6.1.4.1.171.10.76.39.1.100.1
                                           agentCPUutilizationIn5sec 1.3.6.1.4.1.171.10.76.39.1.100.1.1 integer32 read-only
The time scale is set at 5 second intervals. The value will be between 0% (idle) and 100% (very busy).
                                           agentCPUutilizationIn1min 1.3.6.1.4.1.171.10.76.39.1.100.1.2 integer32 read-only
The time scale is set at 1 minute intervals. The value will be between 0% (idle) and 100% (very busy).
                                           agentCPUutilizationIn5min 1.3.6.1.4.1.171.10.76.39.1.100.1.3 integer32 read-only
The time scale is set at 5 minute intervals. The value will be between 0% (idle) and 100% (very busy).
                                       agentMEMutilization 1.3.6.1.4.1.171.10.76.39.1.100.2
                                           agentMEMutilizationIn5sec 1.3.6.1.4.1.171.10.76.39.1.100.2.1 integer32 read-only
The time scale is set at 5 second intervals. The value will be between 0% (idle) and 100% (very busy).
                                           agentMEMutilizationIn1min 1.3.6.1.4.1.171.10.76.39.1.100.2.2 integer32 read-only
The time scale is set at 1 minute intervals. The value will be between 0% (idle) and 100% (very busy).
                                           agentMEMutilizationIn5min 1.3.6.1.4.1.171.10.76.39.1.100.2.3 integer32 read-only
The time scale is set at 5 minute intervals. The value will be between 0% (idle) and 100% (very busy).
                               companyProtocolVlan 1.3.6.1.4.1.171.10.76.39.1.101
                                       protocolGroupNameTable 1.3.6.1.4.1.171.10.76.39.1.101.1 no-access
A table to control protocol group name features of the device.
                                           protocolGroupNameEntry 1.3.6.1.4.1.171.10.76.39.1.101.1.1 no-access
An entry appears in protocol group name table for each interface in the system.
                                               protocolGroupGID 1.3.6.1.4.1.171.10.76.39.1.101.1.1.1 integer32 read-only
The group ID of protocol group name table.
                                               protocolGroupName 1.3.6.1.4.1.171.10.76.39.1.101.1.1.2 displaystring read-write
The group name of protocol group name table.
                                       protocolGroupTable 1.3.6.1.4.1.171.10.76.39.1.101.2 no-access
A table to control protocol group features of the device.
                                           protocolGroupEntry 1.3.6.1.4.1.171.10.76.39.1.101.2.1 no-access
An entry appears in protocol group table for each interface in the system.
                                               protocolGroupId 1.3.6.1.4.1.171.10.76.39.1.101.2.1.1 integer32 read-only
The group ID of protocol group table.
                                               protocolGroupFrameType 1.3.6.1.4.1.171.10.76.39.1.101.2.1.2 integer read-only
The frame type of protocol group table. Enumeration: 'ethernet': 1, 'ieee8023-snap': 2.
                                               protocolGroupProtocolValue 1.3.6.1.4.1.171.10.76.39.1.101.2.1.3 integer32 read-only
The protocol value of protocol group table.
                                               protocolGroupRowStatus 1.3.6.1.4.1.171.10.76.39.1.101.2.1.99 rowstatus read-only
The row status of protocol group table.
                                       protocolVlanTable 1.3.6.1.4.1.171.10.76.39.1.101.3 no-access
A table to control protocol vlan features of the device.
                                           protocolVlanEntry 1.3.6.1.4.1.171.10.76.39.1.101.3.1 no-access
An entry appears in protocol vlan table for each interface in the system.
                                               protocolVlanPort 1.3.6.1.4.1.171.10.76.39.1.101.3.1.1 integer32 read-only
The interface number of protocol vlan table.
                                               protocolVlanVID 1.3.6.1.4.1.171.10.76.39.1.101.3.1.2 integer32 read-only
The vlan ID of protocol vlan table.
                                               protocolVlanGroupID 1.3.6.1.4.1.171.10.76.39.1.101.3.1.3 integer32 read-only
The group ID of protocol vlan table.
                                               protocolVlanRowStatus 1.3.6.1.4.1.171.10.76.39.1.101.3.1.99 rowstatus read-only
The row status of protocol vlan table.
                               companyL2PT 1.3.6.1.4.1.171.10.76.39.1.102
                                       l2PTState 1.3.6.1.4.1.171.10.76.39.1.102.1 integer read-write
This object indicates the global state of Layer 2 protocol tunneling. Enumeration: 'disabled': 2, 'enabled': 1.
                                       l2PTPortTable 1.3.6.1.4.1.171.10.76.39.1.102.2 no-access
A table that cont ains the cable situation for each port.
                                           l2PTEntry 1.3.6.1.4.1.171.10.76.39.1.102.2.1 no-access
A list of cable situations for each port on the device.
                                               l2PTPortIndex 1.3.6.1.4.1.171.10.76.39.1.102.2.1.1 integer no-access
This object indicates the port number. For all machines give maximum port number.
                                               l2PTPortType 1.3.6.1.4.1.171.10.76.39.1.102.2.1.2 integer read-write
This object indicates the Layer 2 protocol tunneling port type. The 'none' value indicates that the port is normal. Layer 2 protocol tunneling is disabled on this port. The 'uni' value indicates that the port is connected to the customer site. A Layer 2 PDU received on a UNI port can be tunneled to a remote customer site across the provider network. The 'nni' value indicates that the port is connected to the provider network. A Tunneled Layer 2 PDU received on an NNI port will be restored to its original format. Enumeration: 'uni': 2, 'none': 1, 'nni': 3.
                                               l2PTProtocol 1.3.6.1.4.1.171.10.76.39.1.102.2.1.3 bits read-write
This object indicates the tunneled protocols on this port. This object can only be applied on a UNI port. If the 'stp' BIT is set, the STP BPDU will be tunneled. If the 'gvrp' BIT is set, the GVRP PDU will be tunneled. If the 'mac-01-00-0C-CC-CC-CC' BIT is set, the PDU with the destination MAC address 01-00-0C-CC-CC-CC will be tunneled . If the 'mac-01-00-0C-CC-CC-CD' BIT is set, then the PDU with the destination MAC address 01-00-0C-CC-CC-CD will be tunneled. Bits: 'macCD': 3, 'stp': 0, 'gvrp': 1, 'macCC': 2.
                                       l2PTThresholdTable 1.3.6.1.4.1.171.10.76.39.1.102.3 no-access
This table contains the protocol tunneling threshold of a UNI port.
                                           l2PTThresholdEntry 1.3.6.1.4.1.171.10.76.39.1.102.3.1 no-access
A list with the Layer2 Protocol tunneling threshold.
                                               l2PTProtocolIndex 1.3.6.1.4.1.171.10.76.39.1.102.3.1.1 integer no-access
This object indicates the tunneled protocol of the port. Enumeration: 'macCD': 4, 'stp': 1, 'gvrp': 2, 'macCC': 3.
                                               l2PTDropThreshold 1.3.6.1.4.1.171.10.76.39.1.102.3.1.2 integer read-write
This object indicates the drop threshold for a given protocol on a UNI port. If the arrival rate of a tunneled protocol has reached its threshold, the received PDUs of this protocol will be dropped. The value 0 indicates there is no threshold for the protocol.
                               companyQinQ 1.3.6.1.4.1.171.10.76.39.1.103
                                       qinqSystem 1.3.6.1.4.1.171.10.76.39.1.103.1
                                           qinqGlobalStatus 1.3.6.1.4.1.171.10.76.39.1.103.1.1 integer read-write
This object is used to enable/disable the Q-in-Q status. Enumeration: 'disabled': 2, 'enabled': 1.
                                           qinqInnerTPID 1.3.6.1.4.1.171.10.76.39.1.103.1.2 unsigned32 read-write
This object is used to set the Q-in-Q inner TPID.
                                           qinqTable 1.3.6.1.4.1.171.10.76.39.1.103.1.3 no-access
A table that contains Q-in-Q information about each port.
                                               qinqEntry 1.3.6.1.4.1.171.10.76.39.1.103.1.3.1 no-access
A list of Q-in-Q information for each port.
                                                   qinqIfIndex 1.3.6.1.4.1.171.10.76.39.1.103.1.3.1.1 interfaceindex read-only
The index of the port.
                                                   qinqRoleState 1.3.6.1.4.1.171.10.76.39.1.103.1.3.1.2 integer read-write
Sets the QinQ Role as NNI or UNI. Enumeration: 'uni': 2, 'nni': 1.
                                                   qinqMissDropState 1.3.6.1.4.1.171.10.76.39.1.103.1.3.1.3 integer read-write
Sets the QinQ Miss Drop state as enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                                   qinqOuterTPID 1.3.6.1.4.1.171.10.76.39.1.103.1.3.1.4 unsigned32 read-write
Sets the QinQ Outer TPID value.
                                                   qinqAddInnerTagState 1.3.6.1.4.1.171.10.76.39.1.103.1.3.1.5 integer read-write
Sets the QinQ Add Inner Tag state as enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                                   qinqAddInnerTagValue 1.3.6.1.4.1.171.10.76.39.1.103.1.3.1.6 unsigned32 read-write
Sets the QinQ Add Inner Tag value.
                                       qinqVLANTranslation 1.3.6.1.4.1.171.10.76.39.1.103.2
                                           qinqVlanTranslationTable 1.3.6.1.4.1.171.10.76.39.1.103.2.1 no-access
A table that contains VLAN translation information.
                                               qinqVlanTranslationEntry 1.3.6.1.4.1.171.10.76.39.1.103.2.1.1 no-access
A list of VLAN translation information.
                                                   qinqVlanTranslationIfIndex 1.3.6.1.4.1.171.10.76.39.1.103.2.1.1.1 interfaceindex read-only
The interface index.
                                                   qinqVlanTranslationCVID 1.3.6.1.4.1.171.10.76.39.1.103.2.1.1.2 unsigned32 read-only
The customer VLAN identifier in a C-TAG.
                                                   qinqVlanTranslationSVID 1.3.6.1.4.1.171.10.76.39.1.103.2.1.1.3 unsigned32 read-write
A VLAN identifier conveyed in an S-TAG.
                                                   qinqVlanTranslationPriority 1.3.6.1.4.1.171.10.76.39.1.103.2.1.1.4 integer32 read-write
The priority of TAG.
                                                   qinqVlanTranslationSVIDOperation 1.3.6.1.4.1.171.10.76.39.1.103.2.1.1.5 integer read-write
The 'add' action indicates to add a tag for the assigned SP-VLAN before the C-VLAN tag. If there is S-TAG in the packet, this rule will not take effect. The 'replace' action indicates to replace the C-VLAN in the tag by the SP-VLAN. If there is no C-TAG in the packet, this rule will not take effect. Enumeration: 'add': 1, 'replace': 2.
                                                   qinqVlanTranslationRowStatus 1.3.6.1.4.1.171.10.76.39.1.103.2.1.1.99 rowstatus read-only
This object indicates the status of this entry.
                               companySfpVendorInfo 1.3.6.1.4.1.171.10.76.39.1.104
                                       sfpVendorInfoTable 1.3.6.1.4.1.171.10.76.39.1.104.1 no-access
This table indicates the IP address as a destination to forward (relay) DHCP packets to.
                                           sfpVendorInfoEntry 1.3.6.1.4.1.171.10.76.39.1.104.1.1 no-access
A list of information indicates the IP address as a destination to forward (relay) DHCP packets to.
                                               sfpPortIndex 1.3.6.1.4.1.171.10.76.39.1.104.1.1.1 integer32 read-only
The available of index for fiber ports.
                                               sfpConnectorType 1.3.6.1.4.1.171.10.76.39.1.104.1.1.2 displaystring read-only
                                               sfpTranceiverCode 1.3.6.1.4.1.171.10.76.39.1.104.1.1.3 displaystring read-only
                                               sfpBaudRate 1.3.6.1.4.1.171.10.76.39.1.104.1.1.4 displaystring read-only
                                               sfpVendorName 1.3.6.1.4.1.171.10.76.39.1.104.1.1.5 displaystring read-only
                                               sfpVendorOui 1.3.6.1.4.1.171.10.76.39.1.104.1.1.6 displaystring read-only
                                               sfpVendorPn 1.3.6.1.4.1.171.10.76.39.1.104.1.1.7 displaystring read-only
                                               sfpVendorRev 1.3.6.1.4.1.171.10.76.39.1.104.1.1.8 displaystring read-only
                                               sfpWavelength 1.3.6.1.4.1.171.10.76.39.1.104.1.1.9 displaystring read-only
                                               sfpVendorSn 1.3.6.1.4.1.171.10.76.39.1.104.1.1.10 displaystring read-only
                                               sfpDateCode 1.3.6.1.4.1.171.10.76.39.1.104.1.1.11 displaystring read-only
                               companyDDM 1.3.6.1.4.1.171.10.76.39.1.105
                                       ddmCtrl 1.3.6.1.4.1.171.10.76.39.1.105.1
                                           ddmPowerUnit 1.3.6.1.4.1.171.10.76.39.1.105.1.1 integer read-write
This object indicates the TX/RX power global unit. Enumeration: 'mw': 0, 'dbm': 1.
                                           ddmActionMgmtTable 1.3.6.1.4.1.171.10.76.39.1.105.1.2 no-access
This table contains the configuration of the action taken when any parameter exceeds its threshold.
                                               ddmActionMgmtEntry 1.3.6.1.4.1.171.10.76.39.1.105.1.2.1 no-access
This is an entry of the swDdmConfigActionTable.
                                                   ddmActionPort 1.3.6.1.4.1.171.10.76.39.1.105.1.2.1.1 integer read-only
This object indicates the port. The available of index for fiber ports.
                                                   ddmActionState 1.3.6.1.4.1.171.10.76.39.1.105.1.2.1.2 integer read-write
This object indicates the action type. Enumeration: 'enable': 1, 'disable': 0.
                                                   ddmActionShutdown 1.3.6.1.4.1.171.10.76.39.1.105.1.2.1.3 integer read-write
This object indicates the action type. Enumeration: 'none': 0, 'warning': 2, 'alarm': 1.
                                           ddmThresholdMgmtTable 1.3.6.1.4.1.171.10.76.39.1.105.1.3 no-access
This table contains DDM temperature configuration information.
                                               ddmThresholdMgmtEntry 1.3.6.1.4.1.171.10.76.39.1.105.1.3.1 no-access
This is an entry of the swDdmConfigThresholdTable.
                                                   ddmThresholdPort 1.3.6.1.4.1.171.10.76.39.1.105.1.3.1.1 integer read-only
This object indicates the port. The available of index for fiber ports.
                                                   ddmThresholdType 1.3.6.1.4.1.171.10.76.39.1.105.1.3.1.2 integer read-only
This object indicates the threshold type. Enumeration: 'txPower': 3, 'bias': 2, 'temperature': 0, 'rxPower': 4, 'voltage': 1.
                                                   ddmHighAlarm 1.3.6.1.4.1.171.10.76.39.1.105.1.3.1.3 displaystring read-write
This object indicates the high alarm threshold value to be configured. As the value is a floating point data type, the DisplayString type is used to define this parameter.
                                                   ddmLowAlarm 1.3.6.1.4.1.171.10.76.39.1.105.1.3.1.4 displaystring read-write
This object indicates the low alarm threshold value to be configured. As the value is a floating data type, the DisplayString type is used to define this parameter.
                                                   ddmHighWarning 1.3.6.1.4.1.171.10.76.39.1.105.1.3.1.5 displaystring read-write
This object indicates the high warning threshold value to be configured. As the value is a floating data type, the DisplayString type is used to define this parameter.
                                                   ddmLowWarning 1.3.6.1.4.1.171.10.76.39.1.105.1.3.1.6 displaystring read-write
This object indicates the low warning threshold value to be configured. As the value is a floating data type, the DisplayString type is used to define this parameter.
                                       ddmInfo 1.3.6.1.4.1.171.10.76.39.1.105.2
                                           ddmStatus 1.3.6.1.4.1.171.10.76.39.1.105.2.1
                                               ddmStatusTable 1.3.6.1.4.1.171.10.76.39.1.105.2.1.1 no-access
This table contains the DDM status information.
                                                   ddmStatusEntry 1.3.6.1.4.1.171.10.76.39.1.105.2.1.1.1 no-access
This is an entry of the ddmStatusTable.
                                                       ddmStatusPort 1.3.6.1.4.1.171.10.76.39.1.105.2.1.1.1.1 integer read-only
This object indicates the port. The available of index for fiber ports.
                                                       ddmTemperature 1.3.6.1.4.1.171.10.76.39.1.105.2.1.1.1.2 displaystring read-only
This object indicates the real time value of the temperature. As the value is a floating point data type, the DisplayString type is used to define this parameter.
                                                       ddmVoltage 1.3.6.1.4.1.171.10.76.39.1.105.2.1.1.1.3 displaystring read-only
This object indicates the real time value of the supply voltage. As the value value is a floating point data type, the DisplayString type is used to define this parameter.
                                                       ddmBiasCurrent 1.3.6.1.4.1.171.10.76.39.1.105.2.1.1.1.4 displaystring read-only
This object indicates the real time value of the tx bias.
                                                       ddmTxPower 1.3.6.1.4.1.171.10.76.39.1.105.2.1.1.1.5 displaystring read-only
This object indicates the real time value of the tx power. As the value is a floating point data type, the DisplayString type is used to define this parameter.
                                                       ddmRxPower 1.3.6.1.4.1.171.10.76.39.1.105.2.1.1.1.6 displaystring read-only
This object indicates the real time value of the rx power. As the value is a floating data type, the DisplayString type is used to define this parameter.
                               companyCpuProtect 1.3.6.1.4.1.171.10.76.39.1.106
                                       cpuProtectState 1.3.6.1.4.1.171.10.76.39.1.106.1 integer read-write
This object indicates the status of the cpu protect. Enumeration: 'disabled': 0, 'enabled': 1.
                                       cpuProtectTable 1.3.6.1.4.1.171.10.76.39.1.106.2 no-access
A table that holds the cpu protect settings of the device.
                                           cpuProtectEntry 1.3.6.1.4.1.171.10.76.39.1.106.2.1 no-access
A list of cpu protect settings of the device.
                                               cpuProtectType 1.3.6.1.4.1.171.10.76.39.1.106.2.1.1 integer read-only
This object indicates the Cpu protect type. Enumeration: 'arp': 1, 'icmp': 3, 'bpd': 2, 'snmp': 5, 'igmp': 4.
                                               cpuProtectPPS 1.3.6.1.4.1.171.10.76.39.1.106.2.1.2 integer read-write
Specify the threshold as packet count per second at which traffic is received on the CPU port. If value set to -1, it means no threshold.
                               companyFTPGroup 1.3.6.1.4.1.171.10.76.39.1.107
                                       ftpFwTable 1.3.6.1.4.1.171.10.76.39.1.107.1
                                           ftpFwServerIpAddress 1.3.6.1.4.1.171.10.76.39.1.107.1.1 displaystring read-write
The FTP server's IPv4 address or IPv6 address is used to upload or download firmware.
                                           ftpFwImageFileName 1.3.6.1.4.1.171.10.76.39.1.107.1.2 displaystring read-write
Firmware file name used to upload or download firmware.
                                           ftpFwUsername 1.3.6.1.4.1.171.10.76.39.1.107.1.3 displaystring read-write
FTP username to login FTP.
                                           ftpFwPassword 1.3.6.1.4.1.171.10.76.39.1.107.1.4 displaystring read-write
FTP password to login FTP.
                                           ftpFwPath 1.3.6.1.4.1.171.10.76.39.1.107.1.5 displaystring read-write
FTP path can find file folder.
                                           ftpFwPort 1.3.6.1.4.1.171.10.76.39.1.107.1.6 integer32 read-write
FTP port to login FTP.
                                           ftpFwImageID 1.3.6.1.4.1.171.10.76.39.1.107.1.7 integer read-write
Fw image id can select imageid1 or imageid2 to flash Enumeration: 'imageID1': 1, 'imageID2': 2.
                                           ftpFwFTPOperation 1.3.6.1.4.1.171.10.76.39.1.107.1.8 integer read-write
The FTP operates to perform downloading the firmware image to the unit. This object is used in conjunction with FTP settings Enumeration: 'download': 1, 'none': 0, 'upload': 2.
                                           ftpFwFTPOperationStatus 1.3.6.1.4.1.171.10.76.39.1.107.1.9 integer read-only
The FTP operation status represent firmware backup or upgrade status. Enumeration: 'fail': 2, 'transmit': 4, 'none': 0, 'progressing': 3, 'success': 1.
                                       ftpConfigTable 1.3.6.1.4.1.171.10.76.39.1.107.2
                                           ftpConfigServerIpAddress 1.3.6.1.4.1.171.10.76.39.1.107.2.1 displaystring read-write
The FTP server's IPv4 address or IPv6 address is used to upload or download firmware.
                                           ftpConfigFileName 1.3.6.1.4.1.171.10.76.39.1.107.2.2 displaystring read-write
Config file name used to upload or download Config.
                                           ftpConfigUsername 1.3.6.1.4.1.171.10.76.39.1.107.2.3 displaystring read-write
FTP username to login FTP.
                                           ftpConfigPassword 1.3.6.1.4.1.171.10.76.39.1.107.2.4 displaystring read-write
FTP password to login FTP.
                                           ftpConfigPath 1.3.6.1.4.1.171.10.76.39.1.107.2.5 displaystring read-write
FTP path can find file folder.
                                           ftpConfigPort 1.3.6.1.4.1.171.10.76.39.1.107.2.6 integer32 read-write
FTP port to login FTP.
                                           ftpConfigConfigID 1.3.6.1.4.1.171.10.76.39.1.107.2.7 integer read-write
Config image id can select imageid1 or imageid2 to flash Enumeration: 'configID2': 2, 'configID1': 1.
                                           ftpConfigFTPOperation 1.3.6.1.4.1.171.10.76.39.1.107.2.8 integer read-write
The FTP operates to perform downloading the config image to the unit. This object is used in conjunction with FTP settings Enumeration: 'download': 1, 'none': 0, 'upload': 2.
                                           ftpConfigFTPOperationStatus 1.3.6.1.4.1.171.10.76.39.1.107.2.9 integer read-only
The FTP operation status represent config backup or upgrade status. Enumeration: 'fail': 2, 'transmit': 4, 'none': 0, 'progressing': 3, 'success': 1.
                               companyERPSGroup 1.3.6.1.4.1.171.10.76.39.1.108
                                       erpsState 1.3.6.1.4.1.171.10.76.39.1.108.1 integer read-write
This object indicates the status of the ERPS state. Enumeration: 'disabled': 2, 'enabled': 1.
                                       erpsLog 1.3.6.1.4.1.171.10.76.39.1.108.2 integer read-write
This object indicates the status of the ERPS log. Enumeration: 'disabled': 2, 'enabled': 1.
                                       erpsTrap 1.3.6.1.4.1.171.10.76.39.1.108.3 integer read-write
This object indicates the status of the ERPS trap. Enumeration: 'disabled': 2, 'enabled': 1.
                                       erpsInfoTable 1.3.6.1.4.1.171.10.76.39.1.108.4 no-access
This table contains the ERPS configuration information.
                                           erpsInfoEntry 1.3.6.1.4.1.171.10.76.39.1.108.4.1 no-access
A list of the ERPS configuration information.
                                               erpsRAPSVLANID 1.3.6.1.4.1.171.10.76.39.1.108.4.1.1 integer read-only
The RAPS VLAN is an index of the configuration.
                                               erpsRingStatus 1.3.6.1.4.1.171.10.76.39.1.108.4.1.2 integer read-write
This indicates the administrative state of the ring. Enumeration: 'disabled': 2, 'enabled': 1.
                                               erpsAdminWestPort 1.3.6.1.4.1.171.10.76.39.1.108.4.1.3 integer read-write
This object indicates actual running ring west port. The value 0 indicates the west port is a virtual channel. Enumeration: 'virtual_channle': -1.
                                               erpsAdminWestPortState 1.3.6.1.4.1.171.10.76.39.1.108.4.1.4 integer read-only
This is the west port state. The state may change occasionally. When the east port is configured on a virtual channel, the east port state is always forwarding. Enumeration: 'fowarding': 1, 'blocking': 2, 'signal-fail': 3.
                                               erpsAdminEastPort 1.3.6.1.4.1.171.10.76.39.1.108.4.1.5 integer read-write
This object indicates actual running ring east port. The value 0 indicates the east port is a virtual channel. Enumeration: 'virtual_channle': -1.
                                               erpsAdminEastPortState 1.3.6.1.4.1.171.10.76.39.1.108.4.1.6 integer read-only
This is the east port state. The state may change occasionally. When the east port is configured on a virtual channel, the east port state is always forwarding. Enumeration: 'fowarding': 1, 'blocking': 2, 'signal-fail': 3.
                                               erpsAdminRPLPort 1.3.6.1.4.1.171.10.76.39.1.108.4.1.7 integer read-write
When the port enable state is enabled, the RPL port's current port role is defined by the ERPS application. Enumeration: 'west': 1, 'none': 0, 'east': 2.
                                               erpsRPLOwner 1.3.6.1.4.1.171.10.76.39.1.108.4.1.8 integer read-write
The administrative value of the RPL owner state. The RPL owner is an Ethernet Ring Node adjacent to the RPL that is responsible for blocking its end of the RPL under normal conditions. Enumeration: 'disabled': 2, 'enabled': 1.
                                               erpsProtectedAddVlanList 1.3.6.1.4.1.171.10.76.39.1.108.4.1.9 octet string read-write
This object is add protect VLAN list
                                               erpsProtectedDelVlanList 1.3.6.1.4.1.171.10.76.39.1.108.4.1.10 octet string read-write
This object is delete protect VLAN list
                                               erpsProtectedVlanList1k 1.3.6.1.4.1.171.10.76.39.1.108.4.1.11 octet string read-only
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this protected vlan, the bit corresponding to that VLAN is set to '1'.
                                               erpsProtectedVlanList2k 1.3.6.1.4.1.171.10.76.39.1.108.4.1.12 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1025 through 2048. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this protected vlan, the bit corresponding to that VLAN is set to '1'.
                                               erpsProtectedVlanList3k 1.3.6.1.4.1.171.10.76.39.1.108.4.1.13 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2049 through 3072. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this protected vlan, the bit corresponding to that VLAN is set to '1'.
                                               erpsProtectedVlanList4k 1.3.6.1.4.1.171.10.76.39.1.108.4.1.14 octet string read-only
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3073 through 4094. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this protected vlan, the bit corresponding to that VLAN is set to '1'. This object is only instantiated on devices with support for VlanIndex values up to 4094.
                                               erpsRingMEL 1.3.6.1.4.1.171.10.76.39.1.108.4.1.15 integer read-write
The ring MEL is the maintenance entity group (MEG) level that provides a communication channel for the ring automatic protection switching (RAPS) information.
                                               erpsHoldoffTime 1.3.6.1.4.1.171.10.76.39.1.108.4.1.16 integer read-write
In order to coordinate the timing of protection switches at multiple layers.
                                               erpsGuardTime 1.3.6.1.4.1.171.10.76.39.1.108.4.1.17 integer read-write
This is used to prevent ring nodes from receiving outdated RAPS messages.
                                               erpsWTRTime 1.3.6.1.4.1.171.10.76.39.1.108.4.1.18 integer read-write
When revertive is enabled, this is used to prevent frequent operation of the protection switch due to an intermittent defect. A failed working transport entity must become stable in a fault-free state.
                                               erpsRevertive 1.3.6.1.4.1.171.10.76.39.1.108.4.1.19 integer read-write
The object is used to enable or disable the revertive operation of a special ring. When revertive is disabled, the traffic link is allowed to use the RPL, after revovering from a failure. When revertive is enabled, the traffic link is restored to the working transport link. Enumeration: 'disabled': 2, 'enabled': 1.
                                               erpsCurrentRingState 1.3.6.1.4.1.171.10.76.39.1.108.4.1.20 integer read-only
This indicates the state of the ring. Enumeration: 'deactivated': 0, 'idle': 1, 'protection': 2, 'manualswitch': 3, 'forcedswitch': 4, 'pending': 5.
                                               erpsRowStatus 1.3.6.1.4.1.171.10.76.39.1.108.4.1.21 rowstatus read-only
This object indicates the RowStatus of this entry.
                                       erpsSubRingTable 1.3.6.1.4.1.171.10.76.39.1.108.5 no-access
This table contains the ERPS sub-ring configuration information.
                                           erpsSubRingEntry 1.3.6.1.4.1.171.10.76.39.1.108.5.1 no-access
A list of the ERPS sub-ring configuration information.
                                               erpsSubRingRAPSVLANID 1.3.6.1.4.1.171.10.76.39.1.108.5.1.1 integer read-only
The RAPS VLAN is an index of the configuration.
                                               erpsSubRingVlanID 1.3.6.1.4.1.171.10.76.39.1.108.5.1.2 integer read-only
This indicates the ring control VLAN-ID of the sub-ring which connects to another ring.
                                               erpsSubRingTCPropagationState 1.3.6.1.4.1.171.10.76.39.1.108.5.1.3 integer read-write
This indicates the state of the sub-ring topology change propagation. Enumeration: 'disabled': 2, 'enabled': 1.
                                               erpsSubRingRowStatus 1.3.6.1.4.1.171.10.76.39.1.108.5.1.4 rowstatus read-only
This object indicates the status of this entry.
                               companyTraps 1.3.6.1.4.1.171.10.76.39.1.120
                                       traps 1.3.6.1.4.1.171.10.76.39.1.120.0
                                           snmpTrapSNMPAuthentication 1.3.6.1.4.1.171.10.76.39.1.120.0.1
SnmpV3TrapSNMPAuthentication.
                                           snmpTrapColdStart 1.3.6.1.4.1.171.10.76.39.1.120.0.2
SnmpV3TrapColdStart.
                                           snmpTrapWarmStart 1.3.6.1.4.1.171.10.76.39.1.120.0.3
SnmpV3TrapWarmStart.
                                           snmpTrapCopperLinkUpDown 1.3.6.1.4.1.171.10.76.39.1.120.0.4
SnmpV3TrapCopperLinkUpDown.
                                           snmpTrapRSTPStateChange 1.3.6.1.4.1.171.10.76.39.1.120.0.5
SnmpV3TrapRSTPStateChange.
                                           snmpTrapFirmUpgrade 1.3.6.1.4.1.171.10.76.39.1.120.0.6
SnmpV3TrapFirmUpgrade.
                                           snmpTrapBPDUAttack 1.3.6.1.4.1.171.10.76.39.1.120.0.11
SnmpV3TrapBPDUAttack.
                                           snmpTrapPortSecurity 1.3.6.1.4.1.171.10.76.39.1.120.0.12
SnmpV3TrapPortSecurity.
                                           snmpTrapIMPBv2 1.3.6.1.4.1.171.10.76.39.1.120.0.13
SnmpV3TrapIMPBv2.
                                           snmpTrapLBD 1.3.6.1.4.1.171.10.76.39.1.120.0.14
SnmpV3TrapLBD.
                                           snmpTrapDHCPScreen 1.3.6.1.4.1.171.10.76.39.1.120.0.15
SnmpV3TrapDHCPScreen.
                                           snmpTrapGratuitousArp 1.3.6.1.4.1.171.10.76.39.1.120.0.16
SnmpV3TrapGratuitousArp.
                                           macNotificatiotn 1.3.6.1.4.1.171.10.76.39.1.120.0.17
This trap indicates the MAC address variations in the address table .
                                           duplicateIP 1.3.6.1.4.1.171.10.76.39.1.120.0.21
duplicateIP .
                                           trafficControl 1.3.6.1.4.1.171.10.76.39.1.120.0.22
trafficControl.
                                           topologyChange 1.3.6.1.4.1.171.10.76.39.1.120.0.23
topologyChange.
                                           newRootBrgaddress 1.3.6.1.4.1.171.10.76.39.1.120.0.24
newRootBrgaddress.
                                           newRootOlddesignatedroot 1.3.6.1.4.1.171.10.76.39.1.120.0.25
newRootOlddesignatedroot.
                                           newRootMSTibridgeregionalroot 1.3.6.1.4.1.171.10.76.39.1.120.0.26
topologyChange.
                               companyswLedPanel 1.3.6.1.4.1.171.10.76.39.1.121
                                       swLedPanelstate 1.3.6.1.4.1.171.10.76.39.1.121.1
                                           swLedInfoTable 1.3.6.1.4.1.171.10.76.39.1.121.1.1 no-access
This table contains the LED information.
                                               swLedInfoEntry 1.3.6.1.4.1.171.10.76.39.1.121.1.1.1 no-access
A list of front panel LED information for each unit in the system.
                                                   swLedInfoUnitId 1.3.6.1.4.1.171.10.76.39.1.121.1.1.1.1 integer read-only
The object indicates the unit ID.
                                                   swLedInfoFrontPanelLedStatus 1.3.6.1.4.1.171.10.76.39.1.121.1.1.1.2 octet string read-only
This object is a set of system LED indicators. The first 32 octets are defined as next, and following octets are for logical port LED. Octet 1 is console led: 0x01 = a user is login through console 0x02 = no user is login through console Octet 2-32 are reserved.