DEVROUTE-MIB: View SNMP OID List / Download MIB

VENDOR: APERTO NETWORKS


 Home MIB: DEVROUTE-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 aniDevRoute 1.3.6.1.4.1.4325.2.9
The aniDevRoutingTable allows the user to view and configure routes. It is similar to the ipRouteTable in RFC1213 except that the table is indexed on 3 objects (aniDevRouteDest, aniDevRouteNextHop, aniDevRouteMask instead of just one). Also, some of the objects are read-only since our software does not allow their configuration. Routes can be added and deleted using this table. The aniDevRouteNextHop field for existing routes can be modified. To add an entry, send a set request with all the index fields set appropriately. It is required to specify aniDevRouteFlag while adding a new route. To delete an entry, select the row with the correct index fields and set the parameter aniDevRouteType to invalid(2). Note, aniDevRouteType cannot be set as anything else other than invalid(2). When the device (BSU or SU) is in Bridge mode, the routing table will not be displayed.
     aniDevRouteTable 1.3.6.1.4.1.4325.2.9.1 no-access
This entity's IP Routing table.
         aniDevRouteEntry 1.3.6.1.4.1.4325.2.9.1.1 no-access
A route to a particular destination.
             aniDevRouteDest 1.3.6.1.4.1.4325.2.9.1.1.1 ipaddress read-only
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table.
             aniDevRouteIfIndex 1.3.6.1.4.1.4325.2.9.1.1.2 integer read-only
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
             aniDevRouteMetric1 1.3.6.1.4.1.4325.2.9.1.1.3 integer read-only
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's aniDevRouteProto value. If this metric is not used, its value should be set to -1.
             aniDevRouteMetric2 1.3.6.1.4.1.4325.2.9.1.1.4 integer read-only
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's aniDevRouteProto value. If this metric is not used, its value should be set to -1.
             aniDevRouteMetric3 1.3.6.1.4.1.4325.2.9.1.1.5 integer read-only
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's aniDevRouteProto value. If this metric is not used, its value should be set to -1.
             aniDevRouteMetric4 1.3.6.1.4.1.4325.2.9.1.1.6 integer read-only
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's aniDevRouteProto value. If this metric is not used, its value should be set to -1.
             aniDevRouteNextHop 1.3.6.1.4.1.4325.2.9.1.1.7 ipaddress read-only
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
             aniDevRouteType 1.3.6.1.4.1.4325.2.9.1.1.8 integer read-only
The type of route. Currently, aniDevRouteType cannot be set to anything other than invalid(2). Setting this object to the value invalid(2) has the effect of deleting/invalidating the corresponding entry in the aniDevRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. Enumeration: 'indirect': 4, 'other': 1, 'direct': 3, 'invalid': 2.
             aniDevRouteProto 1.3.6.1.4.1.4325.2.9.1.1.9 integer read-only
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. Enumeration: 'bgp': 14, 'bbnSpfIgp': 12, 'ggp': 6, 'ospf': 13, 'egp': 5, 'rip': 8, 'es-is': 10, 'ciscoIgrp': 11, 'other': 1, 'is-is': 9, 'icmp': 4, 'local': 2, 'hello': 7, 'netmgmt': 3.
             aniDevRouteAge 1.3.6.1.4.1.4325.2.9.1.1.10 integer read-only
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
             aniDevRouteMask 1.3.6.1.4.1.4325.2.9.1.1.11 ipaddress read-only
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the aniDevRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the aniDevRouteMask by determining whether the value of the correspondent aniDevRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the aniDevRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism. In case of any other aniDevRouteDest (other than the default route), 0.0.0.0 subnet mask is considered an invalid mask. Subnet mask 255.255.255.255 indicates that the route is a Host route. A Network route cannot have subnet mask as 255.255.255.255.
             aniDevRouteMetric5 1.3.6.1.4.1.4325.2.9.1.1.12 integer read-only
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's aniDevRouteProto value. If this metric is not used, its value should be set to -1.
             aniDevRouteInfo 1.3.6.1.4.1.4325.2.9.1.1.13 object identifier read-only
A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's aniDevRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
             aniDevRouteFlag 1.3.6.1.4.1.4325.2.9.1.1.14 integer read-only
The flag to be associated with this particular route entry. While adding a network route, set this value to network(1). When a host route is being added, this value is set to host(2). Also, for host route, the subnet mask aniDevRouteMask has to be 255.255.255.255. Enumeration: 'host': 2, 'network': 1.