DES3550-L2MGMT-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DES3550-L2MGMT-MIB
Download as:   
SNMPv2-CONF, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, SW3500PRIMGMT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swL2MgmtMIB 1.3.6.1.4.1.171.11.64.2.2
The Structure of Layer 2 Network Management Information for the proprietary enterprise.
     swL2DevMgmt 1.3.6.1.4.1.171.11.64.2.2.1
         swL2DevInfo 1.3.6.1.4.1.171.11.64.2.2.1.1
             swDevInfoSystemUpTime 1.3.6.1.4.1.171.11.64.2.2.1.1.1 timeticks read-only
The value of sysUpTime at the time the switch entered its current operational state. If the current state was entered prior to the last re-initialization, then this object contains a zero value. This value is in the units of seconds.
             swDevInfoTotalNumOfPort 1.3.6.1.4.1.171.11.64.2.2.1.1.2 integer read-only
The number of ports within this switch. This value is the sum of the ports within this switch.
             swDevInfoNumOfPortInUse 1.3.6.1.4.1.171.11.64.2.2.1.1.3 integer read-only
The number of ports in this switch connected to the segment or the end stations.
             swDevInfoConsoleInUse 1.3.6.1.4.1.171.11.64.2.2.1.1.4 integer read-only
The usage indication of the console system. Enumeration: 'other': 1, 'in-use': 2, 'not-in-use': 3.
             swDevInfoModuleType 1.3.6.1.4.1.171.11.64.2.2.1.1.5 octet string read-only
This object indicates the module type of this port.
             swDevInfoPowerTable 1.3.6.1.4.1.171.11.64.2.2.1.1.8 no-access
A list of the temperature.
                 swDevInfoPowerEntry 1.3.6.1.4.1.171.11.64.2.2.1.1.8.1 no-access
An entry for Power information.
                     swDevInfoPowerUnitIndex 1.3.6.1.4.1.171.11.64.2.2.1.1.8.1.1 integer read-only
Indicates the ID of the unit in the System
                     swDevInfoPowerID 1.3.6.1.4.1.171.11.64.2.2.1.1.8.1.2 integer read-only
Indicates ID of the power
                     swDevInfoPowerStatus 1.3.6.1.4.1.171.11.64.2.2.1.1.8.1.3 integer read-only
Indicates status of the power Enumeration: 'disconnect': 6, 'working': 3, 'overCurrent': 2, 'other': 0, 'connect': 5, 'fail': 4, 'lowVoltage': 1.
         swL2DevCtrl 1.3.6.1.4.1.171.11.64.2.2.1.2
             swL2DevCtrlStpState 1.3.6.1.4.1.171.11.64.2.2.1.2.1 integer read-write
This object can enable or disable the spanning tree algorithm during the runtime of the system. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlIGMPSnooping 1.3.6.1.4.1.171.11.64.2.2.1.2.2 integer read-write
This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function has been enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlRmonState 1.3.6.1.4.1.171.11.64.2.2.1.2.3 integer read-write
This object can be enable or disable RMON. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlCleanAllStatisticCounter 1.3.6.1.4.1.171.11.64.2.2.1.2.8 integer read-write
If the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing. Enumeration: 'active': 2, 'normal': 1.
             swL2DevCtrlVlanIdOfFDBTbl 1.3.6.1.4.1.171.11.64.2.2.1.2.9 vlanid read-write
Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is the DEFAULT_VLAN_ID of the system.
             swL2MACNotifyState 1.3.6.1.4.1.171.11.64.2.2.1.2.10 integer read-write
This object can enable or disable MAC Notification. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2MACNotifyHistorySize 1.3.6.1.4.1.171.11.64.2.2.1.2.11 integer read-write
This object indicates the history size of variation MAC in the address table. The default value is 1 .
             swL2MACNotifyInterval 1.3.6.1.4.1.171.11.64.2.2.1.2.12 integer read-write
This object indicates the time interval in seconds for triggering the MAC notify message.
             swL2DevCtrlAsymVlanState 1.3.6.1.4.1.171.11.64.2.2.1.2.13 integer read-write
This object can enable or disable asymmetric VLANs during the runtime of the system. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlManagementVlanId 1.3.6.1.4.1.171.11.64.2.2.1.2.14 vlanid read-write
This object controls which Vlan includes system ip and that the Vlan should have been created.
             swL2DevCtrlTelnet 1.3.6.1.4.1.171.11.64.2.2.1.2.15
                   swL2DevCtrlTelnetState 1.3.6.1.4.1.171.11.64.2.2.1.2.15.1 integer read-write
This object controls the Telnet status. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2DevCtrlTelnetTcpPort 1.3.6.1.4.1.171.11.64.2.2.1.2.15.2 integer read-write
This object can designate a TCP port. When Telnet is disabled this object isn't accessible.
             swL2DevCtrlLLDPState 1.3.6.1.4.1.171.11.64.2.2.1.2.16 integer read-write
Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For the receiving of LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlWeb 1.3.6.1.4.1.171.11.64.2.2.1.2.17
                   swL2DevCtrlWebState 1.3.6.1.4.1.171.11.64.2.2.1.2.17.1 integer read-write
This object controls Web status. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2DevCtrlWebTcpPort 1.3.6.1.4.1.171.11.64.2.2.1.2.17.2 integer read-write
This object can designate a TCP port. When Web is disabled this object isn't accessible.
             swL2DevCtrlLLDPForwardMessageState 1.3.6.1.4.1.171.11.64.2.2.1.2.18 integer read-write
When lldp is disabled and lldp forward_message is enabled, the received LLDP Data Unit packets will be forwarded. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlLLDPAdviseSystemIP 1.3.6.1.4.1.171.11.64.2.2.1.2.19 integer read-write
Used to advise system ip to all port Enumeration: 'none': 1, 'advise': 2.
             swL2DevCtrPasswordRecoveryState 1.3.6.1.4.1.171.11.64.2.2.1.2.20 integer read-write
This object controls Password Recovery status. Enumeration: 'disabled': 2, 'enabled': 1.
         swL2DevAlarm 1.3.6.1.4.1.171.11.64.2.2.1.3
             swL2DevAlarmNewRoot 1.3.6.1.4.1.171.11.64.2.2.1.3.1 integer read-write
When the device has become the new root of Spanning Tree, this object decides whether to send a new root trap. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevAlarmTopologyChange 1.3.6.1.4.1.171.11.64.2.2.1.3.2 integer read-write
This object determines whether to send a trap or not when the switch topology has changed. If the object is enabled(3), the topology change trap is sent by the device when any of its configured ports transition from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device doesn't send the trap if this object value is set to disabled or other. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.64.2.2.1.3.3 integer read-write
This object determines whether to send a trap or not when the link has changed. If the object is enabled (3), the Link Change trap is sent by the device when any of its port links change. The device doesn't send the trap if this object value is set to disabled or other. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2VlanMgmt 1.3.6.1.4.1.171.11.64.2.2.3
         swL2VlanAdvertisementTable 1.3.6.1.4.1.171.11.64.2.2.3.1 no-access
A table containing the advertisement state for each VLAN configured into the device by (local or network) management.
             swL2VlanAdvertisementEntry 1.3.6.1.4.1.171.11.64.2.2.3.1.1 no-access
Advertisement state for each VLAN configured in the device.
                 swL2VlanIndex 1.3.6.1.4.1.171.11.64.2.2.3.1.1.1 integer read-only
The VLAN-ID or other identifier referring to this VLAN.
                 swL2VlanName 1.3.6.1.4.1.171.11.64.2.2.3.1.1.2 displaystring read-only
An administratively assigned string, which may be used to identify the VLAN.
                 swL2VlanAdvertiseState 1.3.6.1.4.1.171.11.64.2.2.3.1.1.3 integer read-write
This object indicates the advertised status of this VLAN entry. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2PortMgmt 1.3.6.1.4.1.171.11.64.2.2.4
         swL2PortInfoTable 1.3.6.1.4.1.171.11.64.2.2.4.1 no-access
A table that contains information about every port.
             swL2PortInfoEntry 1.3.6.1.4.1.171.11.64.2.2.4.1.1 no-access
A list of information for each port of the device.
                 swL2PortInfoPortIndex 1.3.6.1.4.1.171.11.64.2.2.4.1.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module).
                 swL2PortInfoUnitIndex 1.3.6.1.4.1.171.11.64.2.2.4.1.1.2 integer read-only
Indicates ID of the unit in the device
                 swL2PortInfoType 1.3.6.1.4.1.171.11.64.2.2.4.1.1.3 integer read-only
This object indicates the connector type of this port. Enumeration: 'portType-1000Base-1394': 10, 'portType-1000Base-TX': 4, 'portType-1000Base-TX-GBIC': 9, 'portType-1000Base-SX': 5, 'portType-100Base-FX': 2, 'none': 11, 'portType-1000Base-SX-GBIC': 7, 'portType-100Base-TX': 1, 'portType-100Base-FL': 3, 'portType-1000Base-LX': 6, 'portType-1000Base-LX-GBIC': 8.
                 swL2PortInfoLinkStatus 1.3.6.1.4.1.171.11.64.2.2.4.1.1.4 integer read-only
This object indicates the port link status. Enumeration: 'link-fail': 3, 'other': 1, 'link-pass': 2.
                 swL2PortInfoNwayStatus 1.3.6.1.4.1.171.11.64.2.2.4.1.1.5 integer read-only
This object indicates the port speed and duplex mode. Enumeration: 'half-10Mbps': 3, 'full-1Gigabps': 8, 'full-100Mbps': 6, 'auto': 2, 'half-1Gigabps': 7, 'full-10Mbps': 4, 'other': 1, 'half-100Mbps': 5.
                 swL2PortInfoModuleType 1.3.6.1.4.1.171.11.64.2.2.4.1.1.6 integer read-only
This object indicates the module type of this port. Enumeration: 'moduleType-1394': 2, 'moduleType-COMBO': 1, 'moduleType-1P-MTRJ-LX': 13, 'moduleType-1000T': 3, 'moduleType-1P-MTRJ-SX': 11, 'moduleType-1P-GBIC-1P-STACK': 18, 'moduleType-2P-STACK': 19, 'moduleType-2P-MTRJ-LX': 14, 'moduleType-2P-100TX': 25, 'moduleType-1P-100FX': 21, 'moduleType-2P-SC-LX': 8, 'moduleType-MGBIC': 4, 'moduleType-1P-TX': 9, 'moduleType-2P-MTRJ-SX': 12, 'moduleType-2P-TX': 10, 'moduleType-1P-GBIC': 15, 'moduleType-1P-100FL': 23, 'moduleType-1P-SC-LX': 7, 'none': 0, 'moduleType-1P-SC-SX': 5, 'moduleType-2P-GBIC': 16, 'moduleType-2P-100FL': 24, 'moduleType-BaseModule-24PORT': 26, 'moduleType-2P-100FX-NEW': 22, 'moduleType-2P-SC-SX': 6, 'moduleType-1P-GBIC-1P-TX': 17, 'moduleType-2P-100FX': 20.
                 swL2PortInfoErrorDisabled 1.3.6.1.4.1.171.11.64.2.2.4.1.1.7 integer read-only
This object indicates the blocking type of this port. Enumeration: 'unknow': 4, 'none': 0, 'lbd': 2, 'storm': 1, 'ddm': 3.
         swL2PortCtrlTable 1.3.6.1.4.1.171.11.64.2.2.4.2 no-access
A table that contains control information about every port.
             swL2PortCtrlEntry 1.3.6.1.4.1.171.11.64.2.2.4.2.1 no-access
A list of control information for each port of the device.
                 swL2PortCtrlPortIndex 1.3.6.1.4.1.171.11.64.2.2.4.2.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortCtrlUnitIndex 1.3.6.1.4.1.171.11.64.2.2.4.2.1.2 integer read-only
Indicates the ID of the unit in the device
                 swL2PortCtrlAdminState 1.3.6.1.4.1.171.11.64.2.2.4.2.1.3 integer read-write
This object decides whether the port is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlNwayState 1.3.6.1.4.1.171.11.64.2.2.4.2.1.4 integer read-write
Choose the port speed, duplex mode, and N-Way function mode. Enumeration: 'nway-disabled-10Mbps-Full': 4, 'nway-enabled': 2, 'nway-disabled-1Gigabps-Full': 8, 'other': 1, 'nway-disabled-100Mbps-Full': 6, 'nway-disabled-1Gigabps-Half': 7, 'nway-disabled-10Mbps-Half': 3, 'nway-disabled-100Mbps-Half': 5.
                 swL2PortCtrlFlowCtrlState 1.3.6.1.4.1.171.11.64.2.2.4.2.1.5 integer read-write
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlLockState 1.3.6.1.4.1.171.11.64.2.2.4.2.1.6 integer read-write
This object decides whether the port is locked or not. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlMACNotifyState 1.3.6.1.4.1.171.11.64.2.2.4.2.1.7 integer read-write
This object decides whether MAC notification is enabled or not. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlMulticastfilter 1.3.6.1.4.1.171.11.64.2.2.4.2.1.8 integer read-write
This object decides the multicast packet filtering mode on this port . Enumeration: 'forward-unregistered-groups': 2, 'other': 0, 'forward-all-groups': 1, 'filter-unregistered-groups': 3.
                 swL2PortCtrlMdixState 1.3.6.1.4.1.171.11.64.2.2.4.2.1.11 integer read-write
This object decides the MDIX mode on this port. Enumeration: 'auto': 1, 'cross': 3, 'normal': 2.
         swL2PortInformationTable 1.3.6.1.4.1.171.11.64.2.2.4.4 no-access
A table that contains information about every port.
             swL2PortInformationEntry 1.3.6.1.4.1.171.11.64.2.2.4.4.1 no-access
A list of information for each port of the device.
                 swL2PortInformationPortIndex 1.3.6.1.4.1.171.11.64.2.2.4.4.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortInformationMediumType 1.3.6.1.4.1.171.11.64.2.2.4.4.1.2 integer read-only
Indicates medium type of the port number. Enumeration: 'copper': 1, 'fiber': 2.
                 swL2PortInformationUnitID 1.3.6.1.4.1.171.11.64.2.2.4.4.1.3 integer read-only
Indicates ID of the unit in the system
                 swL2PortInformationType 1.3.6.1.4.1.171.11.64.2.2.4.4.1.4 integer read-only
This object indicates the connector type of this port. Enumeration: 'portType-1000Base-TX': 4, 'portType-1000Base-none-GBIC': 12, 'portType-10G-xfp-empty': 24, 'portType-SIO': 17, 'portType-100Base-TX': 1, 'portType-1000Base-none-MGBIC': 16, 'portType-10G-xenpak-1310nm': 19, 'portType-10G-xenpak-850nm': 20, 'portType-10G-xfp-1310nm': 22, 'portType-1000Base-TX-MGBIC': 15, 'portType-none': 25, 'portType-10G-xfp-850nm': 23, 'portType-10G': 18, 'portType-1000Base-SX-MGBIC': 13, 'portType-1000Base-TX-GBIC': 9, 'portType-10G-xenpak-empty': 21, 'portType-1000Base-SX': 5, 'portType-1000Base-LX-MGBIC': 14, 'portType-1000Base-LX': 6, 'portType-1000Base-1394': 10, 'portType-100Base-FX': 2, 'portType-1000Base-SX-GBIC': 7, 'portType-100Base-FL': 3, 'portType-1000Base-TX-GBIC-COMBO': 11, 'portType-1000Base-LX-GBIC': 8.
                 swL2PortInformationLinkStatus 1.3.6.1.4.1.171.11.64.2.2.4.4.1.5 integer read-only
This object indicates the port link status. Enumeration: 'link-fail': 3, 'other': 1, 'link-pass': 2.
                 swL2PortInformationNwayStatus 1.3.6.1.4.1.171.11.64.2.2.4.4.1.6 integer read-only
This object indicates the port speed and duplex mode. Enumeration: 'half-10Mbps': 3, 'full-1Gigabps': 8, 'full-100Mbps': 6, 'half-1Gigabps': 7, 'full-10Mbps': 4, 'other': 0, 'full-10Gigabps': 9, 'link-down': 2, 'half-100Mbps': 5, 'empty': 1.
                 swL2PortInformationModuleType 1.3.6.1.4.1.171.11.64.2.2.4.4.1.7 integer read-only
This object indicates the module type of this port. Enumeration: 'moduleType-1394': 2, 'moduleType-COMBO': 1, 'moduleType-1P-MTRJ-LX': 13, 'moduleType-1000T': 3, 'moduleType-1P-MTRJ-SX': 11, 'moduleType-1P-GBIC-1P-STACK': 18, 'moduleType-2P-STACK': 19, 'moduleType-2P-MTRJ-LX': 14, 'moduleType-2P-100TX': 25, 'moduleType-1P-100FX': 21, 'moduleType-2P-SC-LX': 8, 'moduleType-MGBIC': 4, 'moduleType-1P-TX': 9, 'moduleType-2P-MTRJ-SX': 12, 'moduleType-2P-TX': 10, 'moduleType-1P-GBIC': 15, 'moduleType-1P-100FL': 23, 'moduleType-1P-SC-LX': 7, 'none': 0, 'moduleType-1P-SC-SX': 5, 'moduleType-2P-GBIC': 16, 'moduleType-2P-100FL': 24, 'moduleType-BaseModule-24PORT': 26, 'moduleType-2P-100FX-NEW': 22, 'moduleType-2P-SC-SX': 6, 'moduleType-1P-GBIC-1P-TX': 17, 'moduleType-2P-100FX': 20.
                 swL2PortInformationErrorDisabled 1.3.6.1.4.1.171.11.64.2.2.4.4.1.8 integer read-only
This object indicates the blocking type of this port. Enumeration: 'unknow': 4, 'none': 0, 'lbd': 2, 'storm': 1, 'ddm': 3.
         swL2PortControlTable 1.3.6.1.4.1.171.11.64.2.2.4.5 no-access
A table that contains control information about every port.
             swL2PortControlEntry 1.3.6.1.4.1.171.11.64.2.2.4.5.1 no-access
A list of control information for each port of the device.
                 swL2PortControlPortIndex 1.3.6.1.4.1.171.11.64.2.2.4.5.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortControlMediumType 1.3.6.1.4.1.171.11.64.2.2.4.5.1.2 integer read-only
Indicates the medium type of the port number. Enumeration: 'copper': 1, 'fiber': 2.
                 swL2PortControlUnitIndex 1.3.6.1.4.1.171.11.64.2.2.4.5.1.3 integer read-only
Indicates ID of the unit in the device
                 swL2PortControlAdminState 1.3.6.1.4.1.171.11.64.2.2.4.5.1.4 integer read-write
This object decides if the port is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortControlNwayState 1.3.6.1.4.1.171.11.64.2.2.4.5.1.5 integer read-write
Choose the port speed, duplex mode, and N-Way function mode. Enumeration: 'nway-disabled-10Mbps-Full': 4, 'nway-disabled-1Gigabps-Full-master': 9, 'nway-enabled': 2, 'nway-disabled-1Gigabps-Full': 8, 'nway-disabled-1Gigabps-Full-slave': 10, 'other': 1, 'nway-disabled-100Mbps-Full': 6, 'nway-disabled-1Gigabps-Half': 7, 'nway-disabled-10Mbps-Half': 3, 'nway-disabled-100Mbps-Half': 5.
                 swL2PortControlFlowCtrlState 1.3.6.1.4.1.171.11.64.2.2.4.5.1.6 integer read-write
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, the IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortControlLockState 1.3.6.1.4.1.171.11.64.2.2.4.5.1.7 integer read-write
This object decides whether the port is locked or not. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortControlMACNotifyState 1.3.6.1.4.1.171.11.64.2.2.4.5.1.8 integer read-write
This object sets each port's MAC notification state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortControlMulticastfilter 1.3.6.1.4.1.171.11.64.2.2.4.5.1.9 integer read-write
This object controls the multicast port filtering mode for a specified port. Enumeration: 'forward-unregistered-groups': 2, 'other': 0, 'forward-all-groups': 1, 'filter-unregistered-groups': 3.
                 swL2PortControlMdixState 1.3.6.1.4.1.171.11.64.2.2.4.5.1.11 integer read-write
This object decides the MDIX mode on this port. Enumeration: 'auto': 1, 'cross': 3, 'normal': 2.
     swL2LimitedMulticastMgmt 1.3.6.1.4.1.171.11.64.2.2.5
         swL2MulticastRangeTable 1.3.6.1.4.1.171.11.64.2.2.5.1 no-access
.
             swL2MulticastRangeEntry 1.3.6.1.4.1.171.11.64.2.2.5.1.1 no-access
A list of information contained in swL2MulticastRangeTable.
                 swL2MulticastRangeName 1.3.6.1.4.1.171.11.64.2.2.5.1.1.1 displaystring read-only
This object specifies the multicast range name.
                 swL2MulticastRangeFromIp 1.3.6.1.4.1.171.11.64.2.2.5.1.1.2 ipaddress read-only
This object specifies the start IP address for this range.
                 swL2MulticastRangeToIp 1.3.6.1.4.1.171.11.64.2.2.5.1.1.3 ipaddress read-only
This object specifies the end IP address for this range.
                 swL2MulticastRangeRowStatus 1.3.6.1.4.1.171.11.64.2.2.5.1.1.4 rowstatus read-only
This object indicates the status of this entry.
         swL2LimitedMulticastPortInfo 1.3.6.1.4.1.171.11.64.2.2.5.2
             swL2LimitedMulticastStatusTable 1.3.6.1.4.1.171.11.64.2.2.5.2.1 no-access
.
                 swL2LimitedMulticastStatusEntry 1.3.6.1.4.1.171.11.64.2.2.5.2.1.1 no-access
A list of information contained in swL2LimitedMulticastStatusTable.
                     swL2LimitedMulticastPort 1.3.6.1.4.1.171.11.64.2.2.5.2.1.1.1 integer read-only
This object indicates the port.
                     swL2LimitedMulticastAccess 1.3.6.1.4.1.171.11.64.2.2.5.2.1.1.2 integer read-write
This object indicates the access type. Enumeration: 'none': 1, 'deny': 3, 'permit': 2.
                     swL2LimitedMulticastState 1.3.6.1.4.1.171.11.64.2.2.5.2.1.1.3 integer read-write
This object indicates the state for this port. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2LimitedMulticastRangeTable 1.3.6.1.4.1.171.11.64.2.2.5.2.2 no-access
.
                 swL2LimitedMulticastRangeEntry 1.3.6.1.4.1.171.11.64.2.2.5.2.2.1 no-access
A list of information contained in swL2LimitedMulticastRangeTable.
                     swL2LimitedMulticastID 1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.1 integer read-only
This object indicates the range ID.
                     swL2LimitedMulticastRangeName 1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.2 displaystring read-only
                     swL2LimitedMulticastFromIp 1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.3 ipaddress read-only
This object specifies the start IP address of the range on this port.
                     swL2LimitedMulticastToIp 1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.4 ipaddress read-only
This object specifies the end IP address of the range on this port.
                     swL2LimitedMulticastRowStatus 1.3.6.1.4.1.171.11.64.2.2.5.2.2.1.5 rowstatus read-only
This object indicates the status of this entry.
     swL2QOSMgmt 1.3.6.1.4.1.171.11.64.2.2.6
         swL2QOSBandwidthControlTable 1.3.6.1.4.1.171.11.64.2.2.6.1 no-access
.
             swL2QOSBandwidthControlEntry 1.3.6.1.4.1.171.11.64.2.2.6.1.1 no-access
A list of information contained in swL2QOSBandwidthControlTable.
                 swL2QOSBandwidthPortIndex 1.3.6.1.4.1.171.11.64.2.2.6.1.1.1 integer read-only
Indicates the port.
                 swL2QOSBandwidthRxRate 1.3.6.1.4.1.171.11.64.2.2.6.1.1.2 integer read-write
Indicates the RX Rate(Mbit/sec) of the specifed port. Value 0 means no limit.
                 swL2QOSBandwidthTxRate 1.3.6.1.4.1.171.11.64.2.2.6.1.1.3 integer read-write
Indicates the TX Rate(Mbit/sec) of the specifed port. Value 0 means no limit.
                 swL2QOSBandwidthRadiusRxRate 1.3.6.1.4.1.171.11.64.2.2.6.1.1.4 integer read-only
The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.
                 swL2QOSBandwidthRadiusTxRate 1.3.6.1.4.1.171.11.64.2.2.6.1.1.5 integer read-only
The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.
         swL2QOSSchedulingTable 1.3.6.1.4.1.171.11.64.2.2.6.2 no-access
.
             swL2QOSSchedulingEntry 1.3.6.1.4.1.171.11.64.2.2.6.2.1 no-access
A list of information contained in swL2QOSSchedulingTable.
                 swL2QOSSchedulingClassIndex 1.3.6.1.4.1.171.11.64.2.2.6.2.1.1 integer read-only
Indicates the hardware queue number.
                 swL2QOSSchedulingMaxPkts 1.3.6.1.4.1.171.11.64.2.2.6.2.1.2 integer read-write
Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 255 can be specified.
                 swL2QOSSchedulingMaxLatency 1.3.6.1.4.1.171.11.64.2.2.6.2.1.3 integer read-write
Indicates the maximum amount of time the hardware priority queue will be allowed to transmit packets before allowing the next lowest priority queue to begin transmitting its packets. A value between 0 and 255 can be specified- with this value multiplied by 16 ms to arrive at the total allowed time for queue to transmit packets. For example, a value of 3 specifies 3*16=48 ms. The queue will continue transmitting the last packet until it is finished when the max_latency timer expires.
         swL2QOS8021pUserPriorityTable 1.3.6.1.4.1.171.11.64.2.2.6.3 no-access
.
             swL2QOS8021pUserPriorityEntry 1.3.6.1.4.1.171.11.64.2.2.6.3.1 no-access
A list of information contained in swL2QOS8021pUserPriorityTable.
                 swL2QOS8021pUserPriorityIndex 1.3.6.1.4.1.171.11.64.2.2.6.3.1.1 integer read-only
The 802.1p user priority .
                 swL2QOS8021pUserPriorityClass 1.3.6.1.4.1.171.11.64.2.2.6.3.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 3 (the highest priority).
         swL2QOS8021pDefaultPriorityTable 1.3.6.1.4.1.171.11.64.2.2.6.4 no-access
.
             swL2QOS8021pDefaultPriorityEntry 1.3.6.1.4.1.171.11.64.2.2.6.4.1 no-access
A list of information contained in swL2QOS8021pDefaultPriorityTable.
                 swL2QOS8021pDefaultPriorityIndex 1.3.6.1.4.1.171.11.64.2.2.6.4.1.1 integer read-only
Indicates the port number.
                 swL2QOS8021pDefaultPriority 1.3.6.1.4.1.171.11.64.2.2.6.4.1.2 integer read-write
The priority value to assign to untagged packets received by the switch ports on the switch.
                 swL2QOS8021pRadiusPriority 1.3.6.1.4.1.171.11.64.2.2.6.4.1.3 integer read-only
Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
     swL2IpMacBindingMgmt 1.3.6.1.4.1.171.11.64.2.2.7
         swL2IpMacBindingPortTable 1.3.6.1.4.1.171.11.64.2.2.7.1 no-access
The table specifies the port's ip-mac binding function.
             swL2IpMacBindingPortEntry 1.3.6.1.4.1.171.11.64.2.2.7.1.1 no-access
A list of information about the port's ip-mac binding function.
                 swL2IpMacBindingPortIndex 1.3.6.1.4.1.171.11.64.2.2.7.1.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module).
                 swL2IpMacBindingPortState 1.3.6.1.4.1.171.11.64.2.2.7.1.1.2 integer read-write
This object enables (strict or loose mode)/disables IP-MAC binding on the specified port. Note: enable-strict (2): SW learning enable-loose (4) : HW learning Enumeration: 'enable-strict': 2, 'other': 1, 'enable-loose': 4, 'disable': 3.
                 swL2IpMacBindingPortAllowZeroIp 1.3.6.1.4.1.171.11.64.2.2.7.1.1.3 integer read-write
This object enables/disables the allow zero IP status on the specified port. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
                 swL2IpMacBindingPortForwardDhcpPkt 1.3.6.1.4.1.171.11.64.2.2.7.1.1.4 integer read-write
This object can be set to forward or not forward DHCP packets on the specified port. Enumeration: 'disabled': 2, 'enabled': 1.
                 swL2IpMacBindingPortDHCPSnoopMaxEntry 1.3.6.1.4.1.171.11.64.2.2.7.1.1.5 integer read-write
This object indicates the max entry created by DHCP packets on the specified port. Note: When 0 is set on the specified port, the max entry created by DHCP packets is no limit
                 swL2IpMacBindingPortDHCPSnoopEntryClearAction 1.3.6.1.4.1.171.11.64.2.2.7.1.1.6 integer read-write
When set to start (2), the address binding entries learned for the specified ports will be cleared. When get, it always returns other (1). Enumeration: 'start': 2, 'other': 1.
                 swL2IpMacBindingPortStopLearningThreshold 1.3.6.1.4.1.171.11.64.2.2.7.1.1.7 integer read-write
This object indicates the threshold to stop learning new MAC addresses on the specified port. When the number of blocked entries exceeds the threshold, the port will stop learning new addresses. The packet with a new address will be dropped. Note: When 0 is set on the specified port, it means no limit.
                 swL2IpMacBindingPortRecoverLearning 1.3.6.1.4.1.171.11.64.2.2.7.1.1.8 integer read-write
When set to start (2), it will change the stop_learning state to a normal state on the specified port. When get, it always returns other (1). Enumeration: 'start': 2, 'other': 1.
                 swL2IpMacBindingPortLearningMode 1.3.6.1.4.1.171.11.64.2.2.7.1.1.9 integer read-only
When set to Stop(2), it will end the learning state. Enumeration: 'stop': 2, 'normal': 1.
         swL2IpMacBindingTable 1.3.6.1.4.1.171.11.64.2.2.7.2 no-access
This table specifies IP-MAC binding information.
             swL2IpMacBindingEntry 1.3.6.1.4.1.171.11.64.2.2.7.2.1 no-access
This IP-MAC binding entry is used to add/delete/configure the address pair to the switch's authorized user database.
                 swL2IpMacBindingIpIndex 1.3.6.1.4.1.171.11.64.2.2.7.2.1.1 ipaddress read-only
The IP address of the IP-MAC binding.
                 swL2IpMacBindingMac 1.3.6.1.4.1.171.11.64.2.2.7.2.1.2 macaddress read-only
The MAC address of the IP-MAC binding.
                 swL2IpMacBindingStatus 1.3.6.1.4.1.171.11.64.2.2.7.2.1.3 rowstatus read-only
The status of this entry.
                 swL2IpMacBindingPorts 1.3.6.1.4.1.171.11.64.2.2.7.2.1.4 portlist read-only
The port members of this entry.
                 swL2IpMacBindingAction 1.3.6.1.4.1.171.11.64.2.2.7.2.1.5 integer read-only
The action of this entry. Enumeration: 'active': 1, 'inactive': 0.
                 swL2IpMacBindingMode 1.3.6.1.4.1.171.11.64.2.2.7.2.1.6 integer read-only
The mode of this entry. arp: This entry is specified as an ARP mode entry, and this entry will not be added as an access entry. If this object is not specified, the mode defaults to ARP mode. If the system is in ARP mode, the ARP mode entries and ACL mode entries will be effective. If the system is in ACL mode, only the ACL mode entries will be active. acl: This entry is specified as an ACL mode entry. If the user enables the ACL mode, this entry will be added as an access entry. auto: This mode cannot be configured, and when the auto mode is employed, it means this entry is to be learned by DHCP snooping. Enumeration: 'arp': 0, 'auto': 2, 'acl': 1.
         swL2IpMacBindingBlockedTable 1.3.6.1.4.1.171.11.64.2.2.7.3 no-access
The table specifies information of MAC addresses which were blocked.
             swL2IpMacBindingBlockedEntry 1.3.6.1.4.1.171.11.64.2.2.7.3.1 no-access
The entry can not create/configure. It can only delete.
                 swL2IpMacBindingBlockedVID 1.3.6.1.4.1.171.11.64.2.2.7.3.1.1 vlanindex read-only
The object specifies the VLAN ID.
                 swL2IpMacBindingBlockedMac 1.3.6.1.4.1.171.11.64.2.2.7.3.1.2 macaddress read-only
The MAC address which was blocked.
                 swL2IpMacBindingBlockedVlanName 1.3.6.1.4.1.171.11.64.2.2.7.3.1.3 displaystring read-only
This object specifies the VLAN name.
                 swL2IpMacBindingBlockedPort 1.3.6.1.4.1.171.11.64.2.2.7.3.1.4 integer read-only
The port with which the MAC is associated.
                 swL2IpMacBindingBlockedType 1.3.6.1.4.1.171.11.64.2.2.7.3.1.5 integer read-write
The value is always blockByAddrBind. This entry will be deleted by setting the value to delete(3). Enumeration: 'other': 1, 'blockByAddrBind': 2, 'delete': 3.
         swL2IpMacBindingAllPortState 1.3.6.1.4.1.171.11.64.2.2.7.4 integer read-write
This object enables/disables IP-MAC binding on all ports of the system. This action is only applicable when users have write privileges, and can only be viewed when users have read privileges. Note: enable-strict (2): This means strict mode (SW learning). All packets are sent to the CPU. If the user chooses, the port will check ARP packets and IP packets by IP-MAC-PORT Binding entries. If the MAC address can be found or not found by the entry, the MAC will be set as dynamic learned or it will set as blocked, respectively. Other packets will be sent to the CPU and dropped. enable-loose (4) : This means loose mode (HW learning): Only ARP packets and IP broadcast packets will be sent to the CPU. If the user chooses , the port will learn the MAC address on non-ARP and non-IP broadcast packets directly, so these packets will be bypassed. But if the switch receives the ARP or IP broadcast packets and Can not bypass the IP MAC Binding checking, the switch will set this MAC address as blocked and all packets from this MAC address will be dropped. Enumeration: 'enable-strict': 2, 'other': 1, 'enable-loose': 4, 'disable': 3.
         swL2IpMacBindingTrapLogState 1.3.6.1.4.1.171.11.64.2.2.7.5 integer read-write
when set to enable(2),whenever there's a new MAC that violates the pre-defined Ip Mac Binding configuration, the trap will be sent out and the relevant information will be logged into the system. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
         swL2IpMacBindingACLMode 1.3.6.1.4.1.171.11.64.2.2.7.6 integer read-write
when set to enable(2), the Ip Mac Binding will use acl mode Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
         swL2IpMacBindingDHCPSnoopState 1.3.6.1.4.1.171.11.64.2.2.7.7 integer read-write
When the dhcp_snoop function is enabled, all address_binding disabled ports will act as DHCP server ports (the switch will learn IP addresses through DHCP server ports (by DHCP OFFER and DHCP ACK packets)). The auto-learned IP-MAC binding entry will be mapped to a specific source port based on the MAC address learning function. This entry will be created as an ACL-mode binding entry for this specific port. Each entry is associated with a lease time. When the lease time expires, the expired entry will be removed from this port. The automatically learned binding entry can be moved from one port to another port if the DHCP snooping function has learned that the MAC address has moved to a different port. Consider a case where DHCP snooping learns a binding entry, and the same IP-MAC binding entry has been statically configured. Suppose that the learned information is consistent with the statically configured entry, then the automatically learned entry will not be created. Suppose the entry is statically configured in ARP mode, since the automatically learned entry will be created in ACL mode, the entry will become ACL mode. Suppose the entry is statically configured on one port and the entry is automatically learned on another port, then both entries will exist. When the dhcp_snoop function is disabled, all of the automatically learned binding entries will be removed. Enumeration: 'disabled': 2, 'enabled': 1.
         swL2IpMacBindingDHCPSnoopEntryClearAllState 1.3.6.1.4.1.171.11.64.2.2.7.8 integer read-write
Used to clear all entries created by DHCP packets. Enumeration: 'start': 2, 'other': 1.
         swL2IpMacBindingDHCPSnoopTable 1.3.6.1.4.1.171.11.64.2.2.7.9 no-access
The table specifies information regarding the DHCP snooping function learning IP-MAC binding entries.
             swL2IpMacBindingDHCPSnoopEntry 1.3.6.1.4.1.171.11.64.2.2.7.9.1 no-access
A list of information about the DHCP snooping learning IP-MAC binding entry.
                 swL2IpMacBindingDHCPSnoopIpIndex 1.3.6.1.4.1.171.11.64.2.2.7.9.1.1 ipaddress read-only
The IP address of this entry.
                 swL2IpMacBindingDHCPSnoopMac 1.3.6.1.4.1.171.11.64.2.2.7.9.1.2 macaddress read-only
The MAC address of this entry.
                 swL2IpMacBindingDHCPSnoopLeaseTime 1.3.6.1.4.1.171.11.64.2.2.7.9.1.3 integer read-only
Specifies the lease time of this entry. When the lease time expires, this entry will be removed from this port.
                 swL2IpMacBindingDHCPSnoopPort 1.3.6.1.4.1.171.11.64.2.2.7.9.1.4 integer read-only
Specifies the port of this entry.
                 swL2IpMacBindingDHCPSnoopStatus 1.3.6.1.4.1.171.11.64.2.2.7.9.1.5 integer read-only
Specifies the status (inactive or active) of this entry. Enumeration: 'active': 2, 'inactive': 1.
         swL2IpMacBindingPermitIPPoolTable 1.3.6.1.4.1.171.11.64.2.2.7.10 no-access
This table specifies the permitted IP pool of IP-MAC binding.
               swL2IpMacBindingPermitIPPoolEntry 1.3.6.1.4.1.171.11.64.2.2.7.10.1 no-access
A list of information of each permitted IP pool entry.
                   swL2IpMacBindingPermitIPPoolStartIP 1.3.6.1.4.1.171.11.64.2.2.7.10.1.1 ipaddress read-only
The start IP address of the permitted IP pool.
                   swL2IpMacBindingPermitIPPoolEndIP 1.3.6.1.4.1.171.11.64.2.2.7.10.1.2 ipaddress read-only
The end IP address of the permitted IP pool.
                   swL2IpMacBindingPermitIPPoolPorts 1.3.6.1.4.1.171.11.64.2.2.7.10.1.3 portlist read-only
The port members of the permitted IP pool.
                   swL2IpMacBindingPermitIPPoolStatus 1.3.6.1.4.1.171.11.64.2.2.7.10.1.4 rowstatus read-only
The status of the permitted IP pool.
         swL2IpMacBindingARPInspectionState 1.3.6.1.4.1.171.11.64.2.2.7.11 integer read-write
Used to set ARP inspection state. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
     swL2TrunkMgmt 1.3.6.1.4.1.171.11.64.2.2.8
         swL2TrunkMaxSupportedEntries 1.3.6.1.4.1.171.11.64.2.2.8.1 integer read-only
Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable).
         swL2TrunkCurrentNumEntries 1.3.6.1.4.1.171.11.64.2.2.8.2 integer read-only
Current active number of entries in the trunk configuration table.
         swL2TrunkCtrlTable 1.3.6.1.4.1.171.11.64.2.2.8.3 no-access
This table specifies which ports are grouped as a set of ports(up to 8) into a single logical link.
             swL2TrunkCtrlEntry 1.3.6.1.4.1.171.11.64.2.2.8.3.1 no-access
A list of information specifies which ports are grouped as a set of ports(up to 8) into a single logical link.
                 swL2TrunkIndex 1.3.6.1.4.1.171.11.64.2.2.8.3.1.1 integer read-only
The index of logical port trunk. The trunk group number depends on the existence of the unit and module.
                 swL2TrunkName 1.3.6.1.4.1.171.11.64.2.2.8.3.1.2 displaystring read-only
The name of logical port trunk.
                 swL2TrunkMasterPort 1.3.6.1.4.1.171.11.64.2.2.8.3.1.3 integer read-only
The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
                 swL2TrunkMember 1.3.6.1.4.1.171.11.64.2.2.8.3.1.4 portlist read-only
Indicates how many ports are included in this Trunk. The trunk port number depends on the existence of module. The maximum number of ports is 8 for one trunks.
                 swL2TrunkFloodingPort 1.3.6.1.4.1.171.11.64.2.2.8.3.1.5 integer read-only
The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port.
                 swL2TrunkType 1.3.6.1.4.1.171.11.64.2.2.8.3.1.6 integer read-only
This object indicates the type of the trunk group. static : is static trunk group lacp : is LACP trunk group . Enumeration: 'lacp': 3, 'other': 1, 'static': 2.
                 swL2TrunkState 1.3.6.1.4.1.171.11.64.2.2.8.3.1.7 rowstatus read-only
This object indicates the status of this entry.
         swL2TrunkAlgorithm 1.3.6.1.4.1.171.11.64.2.2.8.4 integer read-write
This object configures the part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. Enumeration: 'ip-source': 5, 'mac-destination': 3, 'mac-source': 2, 'mac-source-dest': 4, 'ip-source-dest': 7, 'ip-destination': 6, 'other': 1.
     swL2MirrorMgmt 1.3.6.1.4.1.171.11.64.2.2.9
         swL2MirrorLogicTargetPort 1.3.6.1.4.1.171.11.64.2.2.9.1 integer read-write
This object indicates which port will sniff another port to the switch. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc.
         swL2MirrorPortSourceIngress 1.3.6.1.4.1.171.11.64.2.2.9.2 portlist read-write
This represents the ingress of the source port packet to be sniffed.
         swL2MirrorPortSourceEgress 1.3.6.1.4.1.171.11.64.2.2.9.3 portlist read-write
This represents the egress of the source port packet to be sniffed.
         swL2MirrorPortState 1.3.6.1.4.1.171.11.64.2.2.9.4 integer read-write
This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different for each of the following values. disabled(2) - writing this value to the object will remove the corresponding entry from the table. enabled(3) - this entry will reside in the table. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2IGMPMgmt 1.3.6.1.4.1.171.11.64.2.2.10
           swL2IGMPMaxSupportedVlans 1.3.6.1.4.1.171.11.64.2.2.10.1 integer read-only
Maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable).
           swL2IGMPCtrlTable 1.3.6.1.4.1.171.11.64.2.2.10.3 no-access
This table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If VLAN is in disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with an index range from 1 to 12.
               swL2IGMPCtrlEntry 1.3.6.1.4.1.171.11.64.2.2.10.3.1 no-access
The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled.
                   swL2IGMPCtrlVid 1.3.6.1.4.1.171.11.64.2.2.10.3.1.1 integer read-only
This object indicates the IGMP control entry's VLAN ID. If VLAN is disabled, the VID is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the VID is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the VID setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table.
                   swL2IGMPQueryInterval 1.3.6.1.4.1.171.11.64.2.2.10.3.1.2 integer read-write
The frequency at which the IGMP Host-Query packets are transmitted on this switch.
                   swL2IGMPMaxResponseTime 1.3.6.1.4.1.171.11.64.2.2.10.3.1.3 integer read-write
The maximum query response time on this switch.
                   swL2IGMPRobustness 1.3.6.1.4.1.171.11.64.2.2.10.3.1.4 integer read-write
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to have a high loss, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
                   swL2IGMPLastMemberQueryInterval 1.3.6.1.4.1.171.11.64.2.2.10.3.1.5 integer read-write
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
                   swL2IGMPHostTimeout 1.3.6.1.4.1.171.11.64.2.2.10.3.1.6 integer read-write
The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer has expired. Please reference RFC2236-1997.
                   swL2IGMPRouteTimeout 1.3.6.1.4.1.171.11.64.2.2.10.3.1.7 integer read-write
The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
                   swL2IGMPLeaveTimer 1.3.6.1.4.1.171.11.64.2.2.10.3.1.8 integer read-write
When a query receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.
                   swL2IGMPQueryState 1.3.6.1.4.1.171.11.64.2.2.10.3.1.9 integer read-write
This object decides if the IGMP query is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2IGMPCurrentState 1.3.6.1.4.1.171.11.64.2.2.10.3.1.10 integer read-only
This object indicates the current IGMP query state. Enumeration: 'non-querier': 3, 'other': 1, 'querier': 2.
                   swL2IGMPCtrlState 1.3.6.1.4.1.171.11.64.2.2.10.3.1.11 integer read-write
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different for each of the following values. disable(2) - IGMP funtion is disabled for this entry. enable(3) - IGMP funtion is enabled for this entry. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
           swL2IGMPQueryInfoTable 1.3.6.1.4.1.171.11.64.2.2.10.4 no-access
The table contains the current number of IGMP query packets which have been captured by this device, as well as the IGMP query packets sent by the device.
               swL2IGMPQueryInfoEntry 1.3.6.1.4.1.171.11.64.2.2.10.4.1 no-access
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entires are all enabled.
                   swL2IGMPInfoVid 1.3.6.1.4.1.171.11.64.2.2.10.4.1.1 integer read-only
This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of the IGMP control table (swL2IGMPCtrlTable).
                   swL2IGMPInfoQueryCount 1.3.6.1.4.1.171.11.64.2.2.10.4.1.2 integer read-only
This object indicates the number of query packets received since the IGMP function has been enabled, on a per-VLAN basis.
                   swL2IGMPInfoTxQueryCount 1.3.6.1.4.1.171.11.64.2.2.10.4.1.3 integer read-only
This object indicates the send count of IGMP query messages, on a per-VLAN basis. In case of the IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increments this object by 1.
           swL2IGMPInfoTable 1.3.6.1.4.1.171.11.64.2.2.10.5 no-access
The table containing current IGMP information which have been captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entries are all enabled. Note that the priority of IGMP table entries is lower than the Filtering Table, i.e. if there is a table hash collision between the entries of the IGMP Table and the Filtering Table inside the switch H/W address table, the Filtering Table entry will overwrite the colliding entry of the IGMP Table. See swL2FilterMgmt description also.
               swL2IGMPInfoEntry 1.3.6.1.4.1.171.11.64.2.2.10.5.1 no-access
Information about current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entries are all enabled.
                   swL2IGMPVid 1.3.6.1.4.1.171.11.64.2.2.10.5.1.1 integer read-only
This object indicates the VID of individual IGMP table entries. It shows the VID of IGMP report information captured on the network.
                   swL2IGMPGroupIpAddr 1.3.6.1.4.1.171.11.64.2.2.10.5.1.2 ipaddress read-only
This object identifies group ip address which have been captured from the IGMP packet, on a per-Vlan basis.
                   swL2IGMPMacAddr 1.3.6.1.4.1.171.11.64.2.2.10.5.1.3 macaddress read-only
This object identifies mac addresses which correspond to swL2IGMPGroupIpAddr, on a per-Vlan basis.
                   swL2IGMPPortMap 1.3.6.1.4.1.171.11.64.2.2.10.5.1.4 portlist read-only
This object indicates which ports belong to the same multicast group, on a per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets represent one unit port according to its logic port. If the unit has less then 32 port, the other ports don't care and just fill in zero.
                   swL2IGMPIpGroupReportCount 1.3.6.1.4.1.171.11.64.2.2.10.5.1.5 integer read-only
This object indicates how many report packets were received by the device corresponding with this entry where the IGMP function is enabled, on a per-Vlan basis.
                   swL2IGMPGroupActive 1.3.6.1.4.1.171.11.64.2.2.10.5.1.6 integer read-only
This object indicates that the entry added the multicast table. Enumeration: 'avtive': 2, 'none': 1.
           swL2IGMPMulticastVlanTable 1.3.6.1.4.1.171.11.64.2.2.10.6 no-access
The information of the IGMP snooping multicast VLAN table.
               swL2IGMPMulticastVlanEntry 1.3.6.1.4.1.171.11.64.2.2.10.6.1 no-access
The entry of swL2IGMPMulticastVlanTable.
                   swL2IGMPMulticastVlanid 1.3.6.1.4.1.171.11.64.2.2.10.6.1.1 integer read-only
This object indicates the VLAN id of the IGMP snooping multicast VLAN entry.
                   swL2IGMPMulticastVlanName 1.3.6.1.4.1.171.11.64.2.2.10.6.1.2 snmpadminstring read-only
This object indicates the VLAN name of the IGMP snooping multicast VLAN entry.
                   swL2IGMPMulticastVlanSourcePort 1.3.6.1.4.1.171.11.64.2.2.10.6.1.3 portlist read-only
This object indicates the portlist of the source ports of IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from the member ports would be forwarded to the source ports.
                   swL2IGMPMulticastVlanMemberPort 1.3.6.1.4.1.171.11.64.2.2.10.6.1.4 portlist read-only
This object indicates the portlist of the member ports of IGMP snooping multicast VLAN. The source ports will be set to untag ports of the vlan entry and the IGMP control messages received from the member ports would be forwarded to the source ports.
                   swL2IGMPMulticastVlanRowStatus 1.3.6.1.4.1.171.11.64.2.2.10.6.1.5 rowstatus read-only
This object indicates the status of this entry.
                   swL2IGMPMulticastVlanReplaceSourceIP 1.3.6.1.4.1.171.11.64.2.2.10.6.1.6 ipaddress read-only
This object is used to replace the source IP address in the IP header for IGMP control packets.
                   swL2IGMPMulticastVlanUntagSourcePort 1.3.6.1.4.1.171.11.64.2.2.10.6.1.7 portlist read-write
This indicates the untagged member ports to add to the multicast VLAN.
                   swL2IGMPMulticastVlanRemapPriority 1.3.6.1.4.1.171.11.64.2.2.10.6.1.8 integer read-only
This is the priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. When set to -1, the packet's original priority will be used.
                   swL2IGMPMulticastVlanReplacePriority 1.3.6.1.4.1.171.11.64.2.2.10.6.1.9 integer read-only
This specifies that a packet's priority will be changed by the switch based on the remap priority. This flag will only take effect when remap priority is set. Enumeration: 'disabled': 2, 'enabled': 1.
           swL2IGMPRouterPortTable 1.3.6.1.4.1.171.11.64.2.2.10.7 no-access
The information of the router port table.
               swL2IGMPRouterPortEntry 1.3.6.1.4.1.171.11.64.2.2.10.7.1 no-access
The entry of swL2IGMPRouterPortTable.
                   swL2IGMPRouterPortVlanid 1.3.6.1.4.1.171.11.64.2.2.10.7.1.1 integer read-only
This object indicates the VLAN id of the router port entry.
                   swL2IGMPRouterPortVlanName 1.3.6.1.4.1.171.11.64.2.2.10.7.1.2 snmpadminstring read-only
This object indicates the VLAN name of the router port entry.
                   swL2IGMPRouterPortStaticPortList 1.3.6.1.4.1.171.11.64.2.2.10.7.1.3 portlist read-write
This object indicates the static portlist of the router port entry.
                   swL2IGMPRouterPortDynamicPortList 1.3.6.1.4.1.171.11.64.2.2.10.7.1.4 portlist read-only
This object indicates the dynamic portlist of the router port entry.
                   swL2IGMPRouterPortForbiddenPortList 1.3.6.1.4.1.171.11.64.2.2.10.7.1.5 portlist read-write
This object indicates the forbidden portlist of the router port entry.
           swL2IGMPAccessAuthTable 1.3.6.1.4.1.171.11.64.2.2.10.8 no-access
This table is used to manage the IGMP Access Authentication configurations of the device.
               swL2IGMPAccessAuthEntry 1.3.6.1.4.1.171.11.64.2.2.10.8.1 no-access
A list of manageable entities for IGMP Access Authentication. The configuration is done per port.
                   swL2IGMPAccessAuthPort 1.3.6.1.4.1.171.11.64.2.2.10.8.1.1 integer read-only
The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured.
                   swL2IGMPAccessAuthState 1.3.6.1.4.1.171.11.64.2.2.10.8.1.2 integer read-write
This object denotes the status of IGMP Access Authentication of the port. Enumeration: 'disabled': 1, 'enabled': 2.
     swL2DhcpRelayMgmt 1.3.6.1.4.1.171.11.64.2.2.11
           swL2DhcpRelayState 1.3.6.1.4.1.171.11.64.2.2.11.1 integer read-write
This object indicates if the DHCP relay function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2DhcpRelayHopCount 1.3.6.1.4.1.171.11.64.2.2.11.2 integer read-write
This object indicates the maximum number of router hops that the DHCP packets can cross.
           swL2DhcpRelayTimeThreshold 1.3.6.1.4.1.171.11.64.2.2.11.3 integer read-write
This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP packet.
           swL2DhcpRelayOption82State 1.3.6.1.4.1.171.11.64.2.2.11.4 integer read-write
This object indicates if the DHCP relay agent information option 82 function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2DhcpRelayOption82Check 1.3.6.1.4.1.171.11.64.2.2.11.5 integer read-write
This object indicates if the checking mechanism of DHCP relay agent information option 82 is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2DhcpRelayOption82Policy 1.3.6.1.4.1.171.11.64.2.2.11.6 integer read-write
This object indicates the re-forwarding policy is DHCP relay agent information option 82. replace(1) - replace the exiting option 82 field in messages. drop(2) - discard messages with existing option 82 field. keep(3) - retain the existing option 82 field in messages. Enumeration: 'keep': 3, 'drop': 2, 'replace': 1.
           swL2DhcpRelayCtrlTable 1.3.6.1.4.1.171.11.64.2.2.11.7 no-access
This table specifies the IP address og the destination to forward (relay) DHCP packets to.
               swL2DhcpRelayCtrlEntry 1.3.6.1.4.1.171.11.64.2.2.11.7.1 no-access
A list of information specifying the IP address as a destination to forward (relay) DHCP packets to.
                   swL2DhcpRelayCtrlInterfaceName 1.3.6.1.4.1.171.11.64.2.2.11.7.1.1 displaystring read-only
The name of the IP interface.
                   swL2DhcpRelayCtrlServer 1.3.6.1.4.1.171.11.64.2.2.11.7.1.2 ipaddress read-only
The DHCP server IP address.
                   swL2DhcpRelayCtrlState 1.3.6.1.4.1.171.11.64.2.2.11.7.1.3 integer read-write
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, results in the corresponding entry being removed from the table. valid(3) - this entry will reside in the table. Enumeration: 'other': 1, 'valid': 3, 'invalid': 2.
     swL2LoopDetectMgmt 1.3.6.1.4.1.171.11.64.2.2.12
           swL2LoopDetectCtrl 1.3.6.1.4.1.171.11.64.2.2.12.1
               swL2LoopDetectAdminState 1.3.6.1.4.1.171.11.64.2.2.12.1.1 integer read-write
This object indicates the loopback detection status of the system. Enumeration: 'disabled': 2, 'enabled': 1.
               swL2LoopDetectInterval 1.3.6.1.4.1.171.11.64.2.2.12.1.2 integer read-write
This object indicates the interval value, the range is from 1 to 32767 seconds.
               swL2LoopDetectRecoverTime 1.3.6.1.4.1.171.11.64.2.2.12.1.3 integer read-write
This object indicates the recover time, the range is from 60 to 1000000. A value of 0 disables the recover function.
               swL2LoopDetectMode 1.3.6.1.4.1.171.11.64.2.2.12.1.4 integer read-write
This object indicates the loopback detection mode for the system. Enumeration: 'port-based': 2, 'vlan-based': 1.
               swL2LoopDetectActiveVlan 1.3.6.1.4.1.171.11.64.2.2.12.1.5
                   swL2LoopDetectActiveVlanRangeList1to64 1.3.6.1.4.1.171.11.64.2.2.12.1.5.1 octet string read-only
This object indicates the VLAN range (1-512) that added the multicast table.
                   swL2LoopDetectActiveVlanRangeList65to128 1.3.6.1.4.1.171.11.64.2.2.12.1.5.2 octet string read-only
This object indicates the VLAN range (513-1024) that added the multicast table.
                   swL2LoopDetectActiveVlanRangeList129to192 1.3.6.1.4.1.171.11.64.2.2.12.1.5.3 octet string read-only
This object indicates the VLAN range (1025-1536) that added the multicast table.
                   swL2LoopDetectActiveVlanRangeList193to256 1.3.6.1.4.1.171.11.64.2.2.12.1.5.4 octet string read-only
This object indicates the VLAN range (1537-2048) that added the multicast table.
                   swL2LoopDetectActiveVlanRangeList257to320 1.3.6.1.4.1.171.11.64.2.2.12.1.5.5 octet string read-only
This object indicates the VLAN range (2049-2560) that added the multicast table.
                   swL2LoopDetectActiveVlanRangeList321to384 1.3.6.1.4.1.171.11.64.2.2.12.1.5.6 octet string read-only
This object indicates the VLAN range (2561-3072) that added the multicast table.
                   swL2LoopDetectActiveVlanRangeList385to448 1.3.6.1.4.1.171.11.64.2.2.12.1.5.7 octet string read-only
This object indicates the VLAN range (3073-3584) that added the multicast table.
                   swL2LoopDetectActiveVlanRangeList449to512 1.3.6.1.4.1.171.11.64.2.2.12.1.5.8 octet string read-only
This object indicates the VLAN range (3585-4096) that added the multicast table.
           swL2LoopDetectPortMgmt 1.3.6.1.4.1.171.11.64.2.2.12.2
               swL2LoopDetectPortTable 1.3.6.1.4.1.171.11.64.2.2.12.2.1 no-access
The table specifies the loopback detection function specified by the port.
                   swL2LoopDetectPortEntry 1.3.6.1.4.1.171.11.64.2.2.12.2.1.1 no-access
The table specifies the loopback detection function specified by the port.
                       swL2LoopDetectPortIndex 1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.1 integer read-only
This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module
                       swL2LoopDetectPortState 1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.2 integer read-write
This object indicates the loopback detection function state on the port. Enumeration: 'disabled': 2, 'enabled': 1.
                       swL2LoopDetectPortLoopVLAN 1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.3 displaystring read-only
This object indicates the VLAN list that has detected a loopback.
                       swL2LoopDetectPortLoopStatus 1.3.6.1.4.1.171.11.64.2.2.12.2.1.1.4 integer read-only
This object indicates the port status. Enumeration: 'error': 3, 'loop': 2, 'normal': 1.
     swL2TrafficSegMgmt 1.3.6.1.4.1.171.11.64.2.2.13
           swL2TrafficSegTable 1.3.6.1.4.1.171.11.64.2.2.13.1 no-access
This table specifies that the port can just forward traffic to the specific port list.
               swL2TrafficSegEntry 1.3.6.1.4.1.171.11.64.2.2.13.1.1 no-access
A list of information specifying the port with its traffic forward list.
                   swL2TrafficSegPort 1.3.6.1.4.1.171.11.64.2.2.13.1.1.1 integer read-only
The port number of the logical port.
                   swL2TrafficSegForwardPorts 1.3.6.1.4.1.171.11.64.2.2.13.1.1.2 portlist read-write
The port list that the specific port can forward traffic to.
     swL2PortSecurityMgmt 1.3.6.1.4.1.171.11.64.2.2.14
           swL2PortSecurityControlTable 1.3.6.1.4.1.171.11.64.2.2.14.1 no-access
port security feature which controls the address learning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as static entry. When the learned addresses number reaches N, any incoming packet that has not learned a source addresses is discarded (e.g. dropped) and no more new addresses can be learned on this port.
               swL2PortSecurityControlEntry 1.3.6.1.4.1.171.11.64.2.2.14.1.1 no-access
A list of information contained in swL2PortSecurityControlTable.
                   swL2PortSecurityPortIndex 1.3.6.1.4.1.171.11.64.2.2.14.1.1.1 integer read-only
Indicates the secured port to lock address learning.
                   swL2PortSecurityMaxLernAddr 1.3.6.1.4.1.171.11.64.2.2.14.1.1.2 integer read-write
Indicates allowable number of addresses to be learned at this port.
                   swL2PortSecurityMode 1.3.6.1.4.1.171.11.64.2.2.14.1.1.3 integer read-write
Indicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer has expired. In this mode, when the locked address has aged out, the number of addresses that can be learned has to increase by one. In deleteOnReset(4) mode - never age out the locked addresses unless restarting the system to prevent from port movement or intrusion. Enumeration: 'permanent': 2, 'other': 1, 'deleteOnTimeout': 3, 'deleteOnReset': 4.
                   swL2PortSecurityAdmState 1.3.6.1.4.1.171.11.64.2.2.14.1.1.4 integer read-write
Indicates the administration state of the locking address. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
           swL2PortSecurityTrapLogState 1.3.6.1.4.1.171.11.64.2.2.14.2 integer read-write
when enable(2)is selected,whenever there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out and the relevant information will be logged in system. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
           swL2PortSecurityDelCtrl 1.3.6.1.4.1.171.11.64.2.2.14.3
               swL2PortSecurityDelVlanName 1.3.6.1.4.1.171.11.64.2.2.14.3.1 displaystring read-write
Indicates VLAN name.
               swL2PortSecurityDelPort 1.3.6.1.4.1.171.11.64.2.2.14.3.2 integer read-write
Indicates the port.
               swL2PortSecurityDelMacAddress 1.3.6.1.4.1.171.11.64.2.2.14.3.3 macaddress read-write
Specifies a MAC address.
               swL2PortSecurityDelActivity 1.3.6.1.4.1.171.11.64.2.2.14.3.4 integer read-write
. Enumeration: 'start': 2, 'none': 1.
     swL2MgmtMIBTraps 1.3.6.1.4.1.171.11.64.2.2.15
           swL2MgmtMIBTrapPrefix 1.3.6.1.4.1.171.11.64.2.2.15.0
               swL2macNotification 1.3.6.1.4.1.171.11.64.2.2.15.0.3
This trap indicate the MAC addresses variation in the address table .
               swL2porttypechgNotification 1.3.6.1.4.1.171.11.64.2.2.15.0.4
This trap indicates the port type change.
               swPowerStatusChg 1.3.6.1.4.1.171.11.64.2.2.15.0.5
Power Status change notification. The notification is issued when the swPowerStatus changes as in the following cases: lowVoltage -> overCurrent. lowVoltage -> working. lowVoltage -> disconnect. lowVoltage -> connect. overCurrent -> lowVoltage. overCurrent -> working. overCurrent -> disconnect. overCurrent -> connect. working -> lowVoltage. working -> overCurrent. working -> connect. working -> disconnect. fail -> connect. fail -> disconnect. connect -> lowVoltage. connect -> overCurrent. connect -> working. connect -> disconnect. disconnect -> lowVoltage. disconnect -> overCurrent. disconnect -> working. disconnect -> connect.
               swPowerFailure 1.3.6.1.4.1.171.11.64.2.2.15.0.6
Power Failure notification. The notification issues when the swPowerStatus changes as in the following cases: lowVoltage -> fail. overCurrent -> fail. working -> fail. connect -> fail. disconnect -> fail.
               swPowerRecover 1.3.6.1.4.1.171.11.64.2.2.15.0.7
Power Recover notification. The notification issues when the swPowerStatus changes as in the following cases: fail -> lowVoltage. fail -> overCurrent. fail -> working.
               swL2PortSecurityViolationTrap 1.3.6.1.4.1.171.11.64.2.2.15.0.8
When the port_security trap is enabled, if there's a new MAC that violates the pre-defined port security configuration a trap will be sent out
               swL2IpMacBindingViolationTrap 1.3.6.1.4.1.171.11.64.2.2.15.0.9
When the IP-Mac Binding trap is enabled, if there's a new MAC that violates the pre-defined port security configuration a trap will be sent out
               swL2IpMacBindingStopLearningTrap 1.3.6.1.4.1.171.11.64.2.2.15.0.10
When the IP-MAC Binding trap is enabled, if the specific port changes from a normal state to a stop_learning state, a trap will be sent out.
               swL2IpMacBindingRecoverLearningTrap 1.3.6.1.4.1.171.11.64.2.2.15.0.11
When the IP-MAC Binding trap is enabled, if the specific port changes from a stop_learning state to a normal state, a trap will be sent out.
               swL2PortLoopOccurred 1.3.6.1.4.1.171.11.64.2.2.15.0.12
The trap is sent when a Port loop occurs.
               swL2PortLoopRestart 1.3.6.1.4.1.171.11.64.2.2.15.0.13
The trap is sent when a Port loop restarts after the interval time.
               swL2VlanLoopOccurred 1.3.6.1.4.1.171.11.64.2.2.15.0.14
The trap is sent when a Port with a VID loop occurs.
               swL2VlanLoopRestart 1.3.6.1.4.1.171.11.64.2.2.15.0.15
The trap is sent when a Port with a VID loop restarts after the interval time.
           swl2NotificationBidings 1.3.6.1.4.1.171.11.64.2.2.15.1
               swL2macNotifyInfo 1.3.6.1.4.1.171.11.64.2.2.15.1.1 octet string read-only
This object indicates information about the last time the system rebooted.
           swl2NotifyPortSecurity 1.3.6.1.4.1.171.11.64.2.2.15.2
               swL2PortSecurityViolationMac 1.3.6.1.4.1.171.11.64.2.2.15.2.1 macaddress no-access
This object indicates the MAC address that violated the port security configuration.
           swl2NotifyIpMacBinding 1.3.6.1.4.1.171.11.64.2.2.15.3
               swL2IpMacBindingViolationIP 1.3.6.1.4.1.171.11.64.2.2.15.3.1 macaddress no-access
This object indicates the MAC address that violates the IP-Mac Binging configuration.
               swL2IpMacBindingViolationMac 1.3.6.1.4.1.171.11.64.2.2.15.3.2 macaddress no-access
This object indicates the IP address that violates the IP-Mac Binging configuration.
           swl2NotifyLoopDetect 1.3.6.1.4.1.171.11.64.2.2.15.4
               swL2VlanLoopDetectVID 1.3.6.1.4.1.171.11.64.2.2.15.4.1 integer no-access
This object indicates the VID that has detected a loopback.
     swL2DhcpLocalRelayMgmt 1.3.6.1.4.1.171.11.64.2.2.24
           swL2DhcpLocalRelayState 1.3.6.1.4.1.171.11.64.2.2.24.1 integer read-write
This object indicates the status of the DHCP local relay function of the switch. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2DhcpLocalRelayVLANTable 1.3.6.1.4.1.171.11.64.2.2.24.2 no-access
This table is used to manage the DHCP local relay status for each VLAN.
               swL2DhcpLocalRelayVLANEntry 1.3.6.1.4.1.171.11.64.2.2.24.2.1 no-access
This object lists the current VLANs in the switch and their corresponding DHCP local relay status.
                   swL2DhcpLocalRelayVLANID 1.3.6.1.4.1.171.11.64.2.2.24.2.1.1 integer read-only
This object shows the VIDs of the current VLANS in the switch.
                   swL2DhcpLocalRelayVLANState 1.3.6.1.4.1.171.11.64.2.2.24.2.1.2 integer read-write
This object indicates the status of the DHCP relay function of the VLAN. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2DhcpLocalRelayOption82Table 1.3.6.1.4.1.171.11.64.2.2.24.3 no-access
This table is used to manage the DHCP local relay option 82 policy for each port.
               swL2DhcpLocalRelayOption82Entry 1.3.6.1.4.1.171.11.64.2.2.24.3.1 no-access
This object lists the current ports in the switch and their corresponding DHCP local relay option 82 policy.
                   swL2DhcpLocalRelayOption82PortIndex 1.3.6.1.4.1.171.11.64.2.2.24.3.1.1 integer no-access
This object indicates the module's port number.(1..Max port number in the module)
                   swL2DhcpLocalRelayOption82Policy 1.3.6.1.4.1.171.11.64.2.2.24.3.1.2 integer read-write
This object indicates the policy of the DHCP local relay option 82 of each port. Enumeration: 'keep': 3, 'drop': 2, 'replace': 1.
           swL2DhcpLocalRelayOption82RemoteIDType 1.3.6.1.4.1.171.11.64.2.2.24.4 integer read-write
This object indicates the type of remote ID for DHCP Local Relay. If the type is default, the remote ID will be the MAC address of the device. If the type is user-defined, the remote ID can be defined by writing to the swL2DhcpLocalRelayOption82RemoteID object. Enumeration: 'default': 1, 'user-defined': 2.
           swL2DhcpLocalRelayOption82RemoteID 1.3.6.1.4.1.171.11.64.2.2.24.5 displaystring read-write
This object displays the current remote ID of the device for DHCP Local Relay. If swL2DhcpRelayOption82RemoteIDType is set to default, the value will be the MAC address of the device, and this object cannot be modified. If swL2DhcpRelayOption82RemoteIDType is set to user-defined, a new value can be written to this object.
     swL2PPPoEMgmt 1.3.6.1.4.1.171.11.64.2.2.25
           swL2PPPoECirIDinsertState 1.3.6.1.4.1.171.11.64.2.2.25.1 integer read-write
This object indicates the status of the PPPoE circuit ID insertion state of the switch. Enumeration: 'disabled': 2, 'enabled': 1.