DES3200-52-L3MGMT-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DES3200-52-L3MGMT-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swL3MgmtMIB 1.3.6.1.4.1.171.11.113.9.1.3
The Structure of Layer 3 Network Management Information for the proprietary enterprise.
     swL3DevMgmt 1.3.6.1.4.1.171.11.113.9.1.3.1
         swL3DevCtrl 1.3.6.1.4.1.171.11.113.9.1.3.1.1
             swL3DevCtrlRIPState 1.3.6.1.4.1.171.11.113.9.1.3.1.1.1 integer read-write
This object indicates Routing Information Protocol (RIP) version 2 function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3DevCtrlOSPFState 1.3.6.1.4.1.171.11.113.9.1.3.1.1.2 integer read-write
This object indicates OSPF protocol is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3DevCtrlDVMRPState 1.3.6.1.4.1.171.11.113.9.1.3.1.1.3 integer read-write
This object indicates DVMRP protocol is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3DevCtrlVRRPState 1.3.6.1.4.1.171.11.113.9.1.3.1.1.5 integer read-write
This object indicates VRRP protocol is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3DevCtrlVrrpPingState 1.3.6.1.4.1.171.11.113.9.1.3.1.1.6 integer read-write
This object indicates VRRP protocol Ping is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3DevCtrlDHCPAutoConfigState 1.3.6.1.4.1.171.11.113.9.1.3.1.1.7 integer read-write
This object indicates auto config is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL3IpMgmt 1.3.6.1.4.1.171.11.113.9.1.3.2
         swL3IpCtrlMgmt 1.3.6.1.4.1.171.11.113.9.1.3.2.1
             swL3IpCtrlTable 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3 no-access
This table contains IP interface information.
                 swL3IpCtrlEntry 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1 no-access
A list of information about a specific IP interface.
                     swL3IpCtrlInterfaceName 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.1 displaystring read-only
This object indicates the name of the IP interface.
                     swL3IpCtrlIfIndex 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.2 integer read-only
This object uniquely identifies the IP interface number in the swL3IpCtrlTable.
                     swL3IpCtrlIpAddr 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.3 ipaddress read-write
The IP address of the interface. This object only can take the value of the unicast IP address.
                     swL3IpCtrlIpSubnetMask 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.4 ipaddress read-write
The IP net mask for this interface.
                     swL3IpCtrlVlanName 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.5 displaystring read-write
This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.
                     swL3IpCtrlProxyArp 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.6 integer read-only
This object indicates enable/disable of the proxy ARP function for IPv4. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlSecondary 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.7 truthvalue read-only
When this is true(1), the IP address is the secondary IP. When false(2), the IP address is the primary IP.
                     swL3IpCtrlMode 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.8 integer read-write
This object indicates the IP operation mode. other(1) - This entry is currently in use but the conditions under which it will remain are determined by each of the following values. bootp(3) - The IP address will be set automatically from a BOOTP server. dhcp(4) - The IP address will be set automatically from a DHCP server. Enumeration: 'dhcp': 4, 'other': 1, 'bootp': 3.
                     swL3IpCtrlAdminState 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.9 integer read-write
The state of the IP interface. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlIpv4AdminState 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.10 integer read-write
The IPv4 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlIpv6AdminState 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.12 integer read-write
The IPv6 admin state of the IP interface. The default state is determined by project. This state will only be effective when the swL3IpCtrlAdminState is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlIpv6LinkLocalAddress 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.14 ipv6address read-only
The IPv6 link local address for this interface.
                     swL3IpCtrlIpv6LinkLocalPrefixLen 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.15 integer read-only
The IPv6 prefix length for this IPv6 link local address.
                     swL3IpCtrlState 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.16 rowstatus read-only
This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
                     swL3IpCtrlIpv6LinkLocalAutoState 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.17 integer read-write
The state of the IPv6 link local auto. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
                     swL3IpCtrlLocalProxyArp 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.18 integer read-only
This object indicates enable/disable of the local proxy ARP function for IPv4. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlDhcpv6ClientState 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.20 integer read-write
The object indicates the state of the DHCPv6 client. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlIpDirectedBroadcastState 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.21 integer read-write
The object indicates the state of the IP Directed Broadcast. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlIpDhcpOption12State 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.22 integer read-write
Enable or disable insertion of option 12 in the DHCPDISCOVER and DHCPREQUEST message. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3IpCtrlIpDhcpOption12HostName 1.3.6.1.4.1.171.11.113.9.1.3.2.1.3.1.23 displaystring read-write
Specify the host name to be inserted in the DHCPDISCOVER and DHCPREQUEST message. The specified host name must start with a letter, end with a letter or digit, and have only letters, digits, and hyphen as interior characters; the maximal length is 63. By default, the host name is empty. When set an empty host name, means to clear the host name setting and use the default value to encode option 12.
             swL3Ipv6CtrlTable 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4 no-access
This table contains IPv6 information of an IP interface.
                 swL3Ipv6CtrlEntry 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1 no-access
A list of IPv6 information about a specific IP interface.
                     swL3Ipv6CtrlInterfaceName 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1.1 displaystring read-only
This object indicates the name of the IP interface.
                     swL3Ipv6CtrlMaxReassmblySize 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1.2 integer read-only
Maximum Reassembly Size of the IP interface.
                     swL3Ipv6CtrlNsRetransTimer 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1.3 unsigned32 read-write
Neighbor solicitation's retransmit timer. The unit is set in milliseconds.
                     swL3Ipv6CtrlRaState 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1.5 integer read-write
Neighbor solicited state. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3Ipv6CtrlRaMinRtrAdvInterval 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1.6 integer read-write
The minimum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds. It must be no less than 3 seconds and no greater than .75 * MaxRtrAdvInterval. Default value: 0.33 * MaxRtrAdvInterval
                     swL3Ipv6CtrlRaMaxRtrAdvInterval 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1.7 integer read-write
The maximum time allowed between sending unsolicited multicast Router Advertisements from the interface. The unit is set in seconds.
                     swL3Ipv6CtrlRaLifeTime 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1.8 integer read-write
Indicates the lifetime of the router as the default router.
                     swL3Ipv6CtrlRaReachableTime 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1.9 integer read-write
Indicates the amount of time that a node can consider a neighboring node reachable after receiving a reachability confirmation.
                     swL3Ipv6CtrlRaRetransTime 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1.10 unsigned32 read-write
Indicates the amount of time between retransmissions of neighbor solicited messages. The unit is set in millisecond.
                     swL3Ipv6CtrlRaHopLimit 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1.11 integer read-write
Indicates the default value of the hop limit field in the IPv6 header for packets sent by hosts that receive this RA message.
                     swL3Ipv6CtrlRaManagedFlag 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1.12 integer read-write
When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an address in the addition to the addresses derived from the stateless address configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3Ipv6CtrlRaOtherConfigFlag 1.3.6.1.4.1.171.11.113.9.1.3.2.1.4.1.13 integer read-write
When enabled, it indicates that hosts receiving this RA must use a stateful address configuration protocol to obtain an on-link address configuration information. Enumeration: 'disabled': 2, 'enabled': 1.
             swL3Ipv6AddressCtrlTable 1.3.6.1.4.1.171.11.113.9.1.3.2.1.5 no-access
This table contains IPv6 address information for each IP interface.
                 swL3Ipv6AddressCtrlEntry 1.3.6.1.4.1.171.11.113.9.1.3.2.1.5.1 no-access
A list of information about a specific IPv6 address.
                     swL3Ipv6AddressCtrlInterfaceName 1.3.6.1.4.1.171.11.113.9.1.3.2.1.5.1.1 displaystring read-only
This object indicates the name of the IP interface.
                     swL3Ipv6Address 1.3.6.1.4.1.171.11.113.9.1.3.2.1.5.1.2 ipv6address read-only
Specify the IPv6 address.
                     swL3Ipv6AddressCtrlPrefixLen 1.3.6.1.4.1.171.11.113.9.1.3.2.1.5.1.3 integer read-only
Indicates the prefix length of this IPv6 address.
                     swL3Ipv6AddressCtrlPreferredLifeTime 1.3.6.1.4.1.171.11.113.9.1.3.2.1.5.1.4 unsigned32 read-write
Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains in preferred state. For an infinite valid lifetime, the value can be set to 0xffffffff.
                     swL3Ipv6AddressCtrlValidLifeTime 1.3.6.1.4.1.171.11.113.9.1.3.2.1.5.1.5 unsigned32 read-write
Indicates the number of seconds that an address, based on the specified prefix, using the stateless address configuration, remains valid. For an infinite valid lifetime, the value can be set to 0xffffffff.
                     swL3Ipv6AddressCtrlOnLinkFlag 1.3.6.1.4.1.171.11.113.9.1.3.2.1.5.1.6 integer read-write
When enabled, the address implied by the specified prefix is available on the link where the RA message is received. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3Ipv6AddressCtrlAutonomousFlag 1.3.6.1.4.1.171.11.113.9.1.3.2.1.5.1.7 integer read-write
When enabled, the specified prefix will be used to create an autonomous address configuration. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3Ipv6AddressCtrlState 1.3.6.1.4.1.171.11.113.9.1.3.2.1.5.1.8 rowstatus read-only
This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
                     swL3Ipv6AddressCtrlAddressType 1.3.6.1.4.1.171.11.113.9.1.3.2.1.5.1.9 integer read-only
This object indicates the type of the IPv6 address. manual(1): the IPv6 address is configured by user. dhcpv6(2): the IPv6 address is assigned by DHCPv6 server. stateless(3): the IPv6 address is assigned by router advertisement. Enumeration: 'stateless': 3, 'dhcpv6': 2, 'manual': 1.
             swL3IpCtrlAllIpIfState 1.3.6.1.4.1.171.11.113.9.1.3.2.1.7 integer read-write
This object indicates all interface function state of the device. (except the loopback interface) Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
             swL3LoopBackIpCtrlTable 1.3.6.1.4.1.171.11.113.9.1.3.2.1.8 no-access
This table contains loopback IP interface information.
                 swL3LoopBackIpCtrlEntry 1.3.6.1.4.1.171.11.113.9.1.3.2.1.8.1 no-access
A list of information about a specific loopback IP interface.
                     swL3LoopBackIpCtrlInterfaceName 1.3.6.1.4.1.171.11.113.9.1.3.2.1.8.1.1 displaystring read-only
This object indicates the name of the loopback IP interface.
                     swL3LoopBackIpCtrlIfIndex 1.3.6.1.4.1.171.11.113.9.1.3.2.1.8.1.2 integer read-only
This object uniquely identifies the loopback IP interface number in the swL3LoopBackIpCtrlTable.
                     swL3LoopBackIpCtrlIpAddr 1.3.6.1.4.1.171.11.113.9.1.3.2.1.8.1.3 ipaddress read-only
The IP address of the loopback interface. This object only can take the value of the unicast IP address.
                     swL3LoopBackIpCtrlIpSubnetMask 1.3.6.1.4.1.171.11.113.9.1.3.2.1.8.1.4 ipaddress read-only
The IP net mask for this loopback interface.
                     swL3LoopBackIpCtrlAdminState 1.3.6.1.4.1.171.11.113.9.1.3.2.1.8.1.5 integer read-only
The state of the loopback IP interface. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL3LoopBackIpCtrlRowStatus 1.3.6.1.4.1.171.11.113.9.1.3.2.1.8.1.6 rowstatus read-only
This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
         swL3IpFdbMgmt 1.3.6.1.4.1.171.11.113.9.1.3.2.2
             swL3IpFdbInfoTable 1.3.6.1.4.1.171.11.113.9.1.3.2.2.1 no-access
A table that contains forwarding and/or filtering information. This information is used by the switch in determining how to propagate the received IP packets.
                 swL3IpFdbInfoEntry 1.3.6.1.4.1.171.11.113.9.1.3.2.2.1.1 no-access
Information about a specific IP address for which the bridge has some forwarding and/or filtering information.
                     swL3IpFdbInfoIpAddr 1.3.6.1.4.1.171.11.113.9.1.3.2.2.1.1.1 ipaddress read-only
A IP address for which switch has forwarding and/or filtering information.
                     swL3IpFdbInfoIpSubnetMask 1.3.6.1.4.1.171.11.113.9.1.3.2.2.1.1.2 ipaddress read-only
A IP net mask for this interface for which the switch has forwarding and/or filtering information.
                     swL3IpFdbInfoPort 1.3.6.1.4.1.171.11.113.9.1.3.2.2.1.1.3 integer read-only
Either the value '0', or the port number of the port on which packet having a IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr has been seen. A value of '0' indicates that the port number has not been learned but that switch does have some forwarding/filtering information about this address.
                     swL3IpFdbInfoType 1.3.6.1.4.1.171.11.113.9.1.3.2.2.1.1.4 integer read-only
The status of this entry. Enumeration: 'dynamic': 3, 'other': 1, 'static': 2.
         swL3IpArpAgingTime 1.3.6.1.4.1.171.11.113.9.1.3.2.4 integer read-write
The timeout period in minutes for aging out dynamically learned ARP information.
         swL3IpStaticRouteTable 1.3.6.1.4.1.171.11.113.9.1.3.2.5 no-access
This entity's IP static Routing table.
             swL3IpStaticRouteEntry 1.3.6.1.4.1.171.11.113.9.1.3.2.5.1 no-access
A particular route to a particular destination, under a particular policy. Once an entry is built,it shouldn't be modified.That is,it just supports create and delete actions.
                 swL3IpStaticRouteDest 1.3.6.1.4.1.171.11.113.9.1.3.2.5.1.1 ipaddress read-only
The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteMask object is not equal to x.
                 swL3IpStaticRouteMask 1.3.6.1.4.1.171.11.113.9.1.3.2.5.1.2 ipaddress read-only
Indicate the mask to be logical-AND with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest.
                 swL3IpStaticRouteBkupState 1.3.6.1.4.1.171.11.113.9.1.3.2.5.1.3 integer read-only
The routing state for this route.The value SHOULD be primary(1), backup(2) or none(3). Enumeration: 'none': 3, 'backup': 2, 'primary': 1.
                 swL3IpStaticRouteNextHop 1.3.6.1.4.1.171.11.113.9.1.3.2.5.1.4 ipaddress read-only
Specifies the IP address for the next hop router. An IP address of 255.255.255.255 denotes a Null interface as the next hop.
                 swL3IpStaticRouteMetric 1.3.6.1.4.1.171.11.113.9.1.3.2.5.1.5 integer read-only
Specifies the routing metric for this route.
                 swL3IpStaticRouteStatus 1.3.6.1.4.1.171.11.113.9.1.3.2.5.1.6 integer read-only
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry resides in the table. active(4) - the nextHop of this entry exists in the ARP table. inActive(5) - the next hop of this entry does not exist in the ARP table. Enumeration: 'active': 4, 'inActive': 5, 'other': 1, 'valid': 3, 'invalid': 2.
                 swL3IpStaticRouteWeight 1.3.6.1.4.1.171.11.113.9.1.3.2.5.1.7 integer read-only
Specifies the weight value. Used for the weighted multipath.
                 swL3IpStaticRouteInterfaceName 1.3.6.1.4.1.171.11.113.9.1.3.2.5.1.8 displaystring read-only
Specifies the name of the IP interface.
                 swL3IpStaticRouteCost 1.3.6.1.4.1.171.11.113.9.1.3.2.5.1.9 integer read-only
Specifies the cost of the Route Entry.
     swL3RelayMgmt 1.3.6.1.4.1.171.11.113.9.1.3.3
         swL3RelayDhcpMgmt 1.3.6.1.4.1.171.11.113.9.1.3.3.1
             swL3RelayDhcpState 1.3.6.1.4.1.171.11.113.9.1.3.3.1.1 integer read-write
This object indicates if the DHCP Relay function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3RelayDhcpHopCount 1.3.6.1.4.1.171.11.113.9.1.3.3.1.2 integer read-write
This object indicates the maximum number of router hops that the BOOTP packets can cross.
             swL3RelayDhcpTimeThreshold 1.3.6.1.4.1.171.11.113.9.1.3.3.1.3 integer read-write
This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP packet.
             swL3RelayDhcpCtrlTable 1.3.6.1.4.1.171.11.113.9.1.3.3.1.4 no-access
This table specifies the IP address as a destination to forward (relay) DHCP packets to.
                 swL3RelayDhcpCtrlEntry 1.3.6.1.4.1.171.11.113.9.1.3.3.1.4.1 no-access
A list of information specifying the IP address as a destination to forward (relay) DHCP packets to.
                     swL3RelayDhcpCtrlInterfaceName 1.3.6.1.4.1.171.11.113.9.1.3.3.1.4.1.1 displaystring read-only
The name of the IP interface.
                     swL3RelayDhcpCtrlServer 1.3.6.1.4.1.171.11.113.9.1.3.3.1.4.1.2 ipaddress read-only
The DHCP server IP address.
                     swL3RelayDhcpCtrlState 1.3.6.1.4.1.171.11.113.9.1.3.3.1.4.1.3 integer read-write
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table. Enumeration: 'other': 1, 'valid': 3, 'invalid': 2.
             swL3RelayDhcpOption82State 1.3.6.1.4.1.171.11.113.9.1.3.3.1.5 integer read-write
This object indicates DHCP Relay Option 82 function is enabled or disabled. Enumeration: 'disabled': 0, 'enabled': 1.
             swL3RelayDhcpOption82CheckState 1.3.6.1.4.1.171.11.113.9.1.3.3.1.6 integer read-write
This object indicates DHCP Relay Option 82 Check function is enabled or disabled. Enumeration: 'disabled': 0, 'enabled': 1.
             swL3RelayDhcpOption82Policy 1.3.6.1.4.1.171.11.113.9.1.3.3.1.7 integer read-write
This object indicates DHCP Relay Option 82 Policy. Enumeration: 'keep': 2, 'drop': 1, 'replace': 0.
             swL3DHCPRelayOption60 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8
                 swL3DHCPRelayOption60State 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8.1 integer read-write
This object indicates DHCP relay option 60 function is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                 swL3DHCPRelayOption60DefMode 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8.2 integer read-write
This object indicates default mode that has no option 60 mathcing rules. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption60DefRelayIp. drop(2): means to drop the packet. Enumeration: 'drop': 2, 'relay': 1.
                 swL3DHCPRelayOption60DefTable 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8.3 no-access
This table indicates the default relay servers for the packet that has no option 60 mathcing rules.
                     swL3DHCPRelayOption60DefEntry 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8.3.1 no-access
A list of information indicates the default relay servers for the packet that has no option 60 mathcing rules.
                         swL3DHCPRelayOption60DefRelayIp 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8.3.1.1 ipaddress read-only
This object indicates the IP address of default relay server.
                         swL3DHCPRelayOption60DefRowStatus 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8.3.1.2 rowstatus read-only
This object indicates the status of this entry.
                 swL3DHCPRelayOption60Table 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8.4 no-access
This table indicates the relay servers for the packet at option 60 rules.
                     swL3DHCPRelayOption60Entry 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8.4.1 no-access
A list of information indicates the relay servers for the packet at option 60 rules.
                         swL3DHCPRelayOption60String 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8.4.1.1 displaystring read-only
This object indicates string of this entry.
                         swL3DHCPRelayOption60RelayIp 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8.4.1.2 ipaddress read-only
This object indicates the IP address of relay server.
                         swL3DHCPRelayOption60MatchType 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8.4.1.3 integer read-only
This object indicates match state of this entry. exact(1): means the option 60 string in the packet must full match with the specified string. partial(2): means the option 60 string in the packet only need partial match with the specified string. Enumeration: 'partial': 2, 'exact': 1.
                         swL3DHCPRelayOption60RowStatus 1.3.6.1.4.1.171.11.113.9.1.3.3.1.8.4.1.4 rowstatus read-only
This object indicates the status of this entry.
             swL3DHCPRelayOption61 1.3.6.1.4.1.171.11.113.9.1.3.3.1.9
                 swL3DHCPRelayOption61State 1.3.6.1.4.1.171.11.113.9.1.3.3.1.9.1 integer read-write
This object indicates DHCP relay option 61 function is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                 swL3DHCPRelayOption61DefMode 1.3.6.1.4.1.171.11.113.9.1.3.3.1.9.2 integer read-write
This object indicates default mode that has no option 61 mathcing rules. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption61DefRelayIp. drop(2): means to drop the packet. Enumeration: 'drop': 2, 'relay': 1.
                 swL3DHCPRelayOption61DefRelayIp 1.3.6.1.4.1.171.11.113.9.1.3.3.1.9.3 ipaddress read-write
This object indicates the IP address of default relay server that has no option 61 mathcing rules. Pay attention to when swL3DHCPRelayOption61Mode is: relay(1): this object must be set together. drop(2): this object can not be set, and it always returns '0.0.0.0'.
                 swL3DHCPRelayOption61Table 1.3.6.1.4.1.171.11.113.9.1.3.3.1.9.4 no-access
This table indicates the relay servers for the packet at option 61 rules.
                     swL3DHCPRelayOption61Entry 1.3.6.1.4.1.171.11.113.9.1.3.3.1.9.4.1 no-access
A list of information indicates the relay servers for the packet at option 61 rules.
                         swL3DHCPRelayOption61ClientType 1.3.6.1.4.1.171.11.113.9.1.3.3.1.9.4.1.1 integer read-only
This object indicates client type of this entry. mac(1): means the client-ID which is the MAC address of client. string(2): means the client-ID which is specified string by administrator. Enumeration: 'mac': 1, 'string': 2.
                         swL3DHCPRelayOption61ClientID 1.3.6.1.4.1.171.11.113.9.1.3.3.1.9.4.1.2 displaystring read-only
This object indicates string of this entry. When swL3DHCPRelayOption61ClientType is mac(1), the format of this object should be XX-XX-XX-XX-XX-XX (MAC address).
                         swL3DHCPRelayOption61Mode 1.3.6.1.4.1.171.11.113.9.1.3.3.1.9.4.1.3 integer read-only
This object indicates mode of this entry. relay(1): means to relay the packet to the IP address which is specified by swL3DHCPRelayOption61RelayIp. drop(2): means to drop the packet. Enumeration: 'drop': 2, 'relay': 1.
                         swL3DHCPRelayOption61RelayIp 1.3.6.1.4.1.171.11.113.9.1.3.3.1.9.4.1.4 ipaddress read-only
This object indicates the IP address of relay server. Pay attention to when swL3DHCPRelayOption61Mode is: relay(1): this object must be set together. drop(2): this object can not be set, and it always returns '0.0.0.0'.
                         swL3DHCPRelayOption61RowStatus 1.3.6.1.4.1.171.11.113.9.1.3.3.1.9.4.1.5 rowstatus read-only
This object indicates the status of this entry.
         swL3RelayDnsMgmt 1.3.6.1.4.1.171.11.113.9.1.3.3.2
             swL3RelayDnsState 1.3.6.1.4.1.171.11.113.9.1.3.3.2.1 integer read-write
This object indicates if the DNS Relay function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3RelayDnsPrimaryServer 1.3.6.1.4.1.171.11.113.9.1.3.3.2.2 ipaddress read-write
This object indicates the address of the primary DNS server.
             swL3RelayDnsSecondaryServer 1.3.6.1.4.1.171.11.113.9.1.3.3.2.3 ipaddress read-write
This object indicates the address of the secondary DNS server.
             swL3RelayDnsCacheState 1.3.6.1.4.1.171.11.113.9.1.3.3.2.4 integer read-write
This object indicates DNS Relay cache is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3RelayDnsStaticTableState 1.3.6.1.4.1.171.11.113.9.1.3.3.2.5 integer read-write
This object indicates DNS Relay static table is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3RelayDnsCtrlTable 1.3.6.1.4.1.171.11.113.9.1.3.3.2.6 no-access
This table displays the current DNS relay static table.
                 swL3RelayDnsCtrlEntry 1.3.6.1.4.1.171.11.113.9.1.3.3.2.6.1 no-access
A list of information display the current DNS relay static table.
                     swL3RelayDnsCtrlDomainName 1.3.6.1.4.1.171.11.113.9.1.3.3.2.6.1.1 displaystring read-only
The domain name of the entry.
                     swL3RelayDnsCtrlIpAddr 1.3.6.1.4.1.171.11.113.9.1.3.3.2.6.1.2 ipaddress read-only
The IP address of the entry.
                     swL3RelayDnsCtrlState 1.3.6.1.4.1.171.11.113.9.1.3.3.2.6.1.3 integer read-write
This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry is reside in the table. Enumeration: 'other': 1, 'valid': 3, 'invalid': 2.
     swL3Md5Table 1.3.6.1.4.1.171.11.113.9.1.3.4 no-access
This table displays the current MD5 key table.
         swL3Md5Entry 1.3.6.1.4.1.171.11.113.9.1.3.4.1 no-access
A list of information displays the current MD5 key table.
             swL3Md5KeyId 1.3.6.1.4.1.171.11.113.9.1.3.4.1.1 integer read-only
The MD5 key ID.
             swL3Md5Key 1.3.6.1.4.1.171.11.113.9.1.3.4.1.2 displaystring read-only
An MD5 password of up to 16 bytes.
             swL3Md5RowStatus 1.3.6.1.4.1.171.11.113.9.1.3.4.1.3 rowstatus read-only
This object indicates the status of this entry.
     swL3RouteRedistriTable 1.3.6.1.4.1.171.11.113.9.1.3.5 no-access
Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the varios routers' routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol.
         swL3RouteRedistriEntry 1.3.6.1.4.1.171.11.113.9.1.3.5.1 no-access
A list of information displaying the route redistribution table.
             swL3RouteRedistriSrcProtocol 1.3.6.1.4.1.171.11.113.9.1.3.5.1.1 integer read-only
Allows the selection of the protocol of the source device. Enumeration: 'local': 5, 'rip': 2, 'bgp': 6, 'other': 1, 'static': 4, 'ospf': 3.
             swL3RouteRedistriDstProtocol 1.3.6.1.4.1.171.11.113.9.1.3.5.1.2 integer read-only
Allows the selection of the protocol of the destination device. Enumeration: 'bgp': 4, 'other': 1, 'ospf': 3, 'rip': 2.
             swL3RouteRedistriType 1.3.6.1.4.1.171.11.113.9.1.3.5.1.3 integer read-only
Allows the selection of one of the methods for calculating the metric value. Enumeration: 'all': 2, 'extType2': 10, 'extType1': 9, 'other': 1, 'external': 6, 'type-1': 3, 'inter-E1': 7, 'inter-E2': 8, 'type-2': 4, 'internal': 5.
             swL3RouteRedistriMetric 1.3.6.1.4.1.171.11.113.9.1.3.5.1.4 unsigned32 read-only
Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates default value.
             swL3RouteRedistriRowStatus 1.3.6.1.4.1.171.11.113.9.1.3.5.1.5 rowstatus read-only
This object indicates the status of this entry.
             swL3RouteRedistriRouteMapName 1.3.6.1.4.1.171.11.113.9.1.3.5.1.6 displaystring read-only
This Object just works when the destination protocol is BGP and indicate the route-map working when redistribute the route to BGP.
     swL3OspfHostTable 1.3.6.1.4.1.171.11.113.9.1.3.6 no-access
The list of Hosts, and their metrics, that the router will advertise as host routes.
         swL3OspfHostEntry 1.3.6.1.4.1.171.11.113.9.1.3.6.1 no-access
A metric to be advertised, for a given type of service, when a given host is reachable.
             swL3OspfHostIpAddress 1.3.6.1.4.1.171.11.113.9.1.3.6.1.1 ipaddress read-only
The IP Address of the Host.
             swL3OspfHostTOS 1.3.6.1.4.1.171.11.113.9.1.3.6.1.2 tostype read-only
The Type of Service of the route being configured.
             swL3OspfHostMetric 1.3.6.1.4.1.171.11.113.9.1.3.6.1.3 metric read-only
The Metric to be advertised.
             swL3OspfHostAreaID 1.3.6.1.4.1.171.11.113.9.1.3.6.1.4 areaid read-only
The Area the Host Entry is to be found within. By default, the area that a subsuming OSPF interface is in, or 0.0.0.0
             swL3OspfHostStatus 1.3.6.1.4.1.171.11.113.9.1.3.6.1.5 rowstatus read-only
This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
     swL3ospfVirtIfTable 1.3.6.1.4.1.171.11.113.9.1.3.7 no-access
Information about this router's virtual inter- faces.
         swL3ospfVirtIfEntry 1.3.6.1.4.1.171.11.113.9.1.3.7.1 no-access
Information about a single Virtual Interface.
             swL3ospfVirtIfAreaId 1.3.6.1.4.1.171.11.113.9.1.3.7.1.1 areaid read-only
The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
             swL3ospfVirtIfNeighbor 1.3.6.1.4.1.171.11.113.9.1.3.7.1.2 routerid read-only
The Router ID of the Virtual Neighbor.
             swL3ospfVirtIfTransitDelay 1.3.6.1.4.1.171.11.113.9.1.3.7.1.3 uptomaxage read-only
The estimated number of seconds it takes to transmit a link- state update packet over this interface.
             swL3ospfVirtIfRetransInterval 1.3.6.1.4.1.171.11.113.9.1.3.7.1.4 uptomaxage read-only
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time.
             swL3ospfVirtIfHelloInterval 1.3.6.1.4.1.171.11.113.9.1.3.7.1.5 hellorange read-only
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.
             swL3ospfVirtIfRtrDeadInterval 1.3.6.1.4.1.171.11.113.9.1.3.7.1.6 integer32 read-only
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor.
             swL3ospfVirtIfState 1.3.6.1.4.1.171.11.113.9.1.3.7.1.7 integer read-only
OSPF virtual interface states. Enumeration: 'down': 1, 'pointToPoint': 4.
             swL3ospfVirtIfEvents 1.3.6.1.4.1.171.11.113.9.1.3.7.1.8 counter32 read-only
The number of state changes or error events on this Virtual Link
             swL3ospfVirtIfAuthType 1.3.6.1.4.1.171.11.113.9.1.3.7.1.9 integer read-only
The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally.
             swL3ospfVirtIfAuthKey 1.3.6.1.4.1.171.11.113.9.1.3.7.1.10 octet string read-only
If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment.
             swL3ospfVirtIfAuthKeyID 1.3.6.1.4.1.171.11.113.9.1.3.7.1.11 integer read-only
The MD5 key ID.
             swL3ospfVirtIfStatus 1.3.6.1.4.1.171.11.113.9.1.3.7.1.12 rowstatus read-only
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
     swL3ospfIfTable 1.3.6.1.4.1.171.11.113.9.1.3.8 no-access
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF.
         swL3ospfIfEntry 1.3.6.1.4.1.171.11.113.9.1.3.8.1 no-access
The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF.
             swL3ospfIfIpAddress 1.3.6.1.4.1.171.11.113.9.1.3.8.1.1 ipaddress read-only
The IP address of this OSPF interface.
             swL3ospfAddressLessIf 1.3.6.1.4.1.171.11.113.9.1.3.8.1.2 integer32 read-only
For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.
             swL3ospfIfAreaId 1.3.6.1.4.1.171.11.113.9.1.3.8.1.3 areaid read-write
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.
             swL3ospfIfType 1.3.6.1.4.1.171.11.113.9.1.3.8.1.4 integer read-write
The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'. Enumeration: 'broadcast': 1, 'nbma': 2, 'pointToPoint': 3, 'pointToMultipoint': 5.
             swL3ospfIfAdminStat 1.3.6.1.4.1.171.11.113.9.1.3.8.1.5 status read-write
The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.
             swL3ospfIfRtrPriority 1.3.6.1.4.1.171.11.113.9.1.3.8.1.6 designatedrouterpriority read-write
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
             swL3ospfIfTransitDelay 1.3.6.1.4.1.171.11.113.9.1.3.8.1.7 uptomaxage read-write
The estimated number of seconds it takes to transmit a link state update packet over this interface.
             swL3ospfIfRetransInterval 1.3.6.1.4.1.171.11.113.9.1.3.8.1.8 uptomaxage read-write
The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets.
             swL3ospfIfHelloInterval 1.3.6.1.4.1.171.11.113.9.1.3.8.1.9 hellorange read-write
The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.
             swL3ospfIfRtrDeadInterval 1.3.6.1.4.1.171.11.113.9.1.3.8.1.10 positiveinteger read-write
The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
             swL3ospfIfPollInterval 1.3.6.1.4.1.171.11.113.9.1.3.8.1.11 positiveinteger read-write
The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.
             swL3ospfIfState 1.3.6.1.4.1.171.11.113.9.1.3.8.1.12 integer read-only
The OSPF Interface State. Enumeration: 'otherDesignatedRouter': 7, 'backupDesignatedRouter': 6, 'loopback': 2, 'down': 1, 'designatedRouter': 5, 'waiting': 3, 'pointToPoint': 4.
             swL3ospfIfDesignatedRouter 1.3.6.1.4.1.171.11.113.9.1.3.8.1.13 ipaddress read-only
The IP Address of the Designated Router.
             swL3ospfIfBackupDesignatedRouter 1.3.6.1.4.1.171.11.113.9.1.3.8.1.14 ipaddress read-only
The IP Address of the Backup Designated Router.
             swL3ospfIfEvents 1.3.6.1.4.1.171.11.113.9.1.3.8.1.15 counter32 read-only
The number of times this OSPF interface has changed its state, or an error has occurred.
             swL3ospfIfMulticastForwarding 1.3.6.1.4.1.171.11.113.9.1.3.8.1.16 integer read-write
The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effective- ly disables all multicast forwarding. Enumeration: 'unicast': 3, 'multicast': 2, 'blocked': 1.
             swL3ospfIfDemand 1.3.6.1.4.1.171.11.113.9.1.3.8.1.17 truthvalue read-write
Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.
             swL3ospfIfAuthType 1.3.6.1.4.1.171.11.113.9.1.3.8.1.18 integer read-write
The authentication type specified for an in- terface. Additional authentication types may be assigned locally.
             swL3ospfIfAuthKey 1.3.6.1.4.1.171.11.113.9.1.3.8.1.19 octet string read-write
The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfIfAuthKey always returns an Oc- tet String of length zero.
             swL3ospfIfAuthKeyID 1.3.6.1.4.1.171.11.113.9.1.3.8.1.20 integer read-write
The MD5 key ID.
             swL3ospfIfPassiveMode 1.3.6.1.4.1.171.11.113.9.1.3.8.1.21 integer read-write
Assign the designated entry to be a passive interface. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL3ospfIfMetric 1.3.6.1.4.1.171.11.113.9.1.3.8.1.23 metric read-write
The Metric to be advertised.
     swL3RoutePreference 1.3.6.1.4.1.171.11.113.9.1.3.9
         swL3RoutePreferenceRIP 1.3.6.1.4.1.171.11.113.9.1.3.9.1 integer read-write
Used to configure the route preference of RIP.
         swL3RoutePreferenceOSPFIntra 1.3.6.1.4.1.171.11.113.9.1.3.9.2 integer read-write
Used to configure the route preference of OSPF Intra.
         swL3RoutePreferenceStatic 1.3.6.1.4.1.171.11.113.9.1.3.9.3 integer read-write
Used to configure the route preference of Static.
         swL3RoutePreferenceLocal 1.3.6.1.4.1.171.11.113.9.1.3.9.4 integer read-only
Used to read the route preference of Local.
         swL3RoutePreferenceOSPFInter 1.3.6.1.4.1.171.11.113.9.1.3.9.5 integer read-write
Used to configure the route preference of OSPF Inter.
         swL3RoutePreferenceOSPFExtT1 1.3.6.1.4.1.171.11.113.9.1.3.9.6 integer read-write
Used to configure the route preference of OSPFExtT1.
         swL3RoutePreferenceOSPFExtT2 1.3.6.1.4.1.171.11.113.9.1.3.9.7 integer read-write
Used to configure the route preference of OSPF ExtT2.
         swL3RoutePreferenceDefault 1.3.6.1.4.1.171.11.113.9.1.3.9.8 integer read-write
Used to configure the route preference of Default route.
         swL3RoutePreferenceEBGP 1.3.6.1.4.1.171.11.113.9.1.3.9.9 integer read-write
Used to configure the route preference of EBGP.
         swL3RoutePreferenceIBGP 1.3.6.1.4.1.171.11.113.9.1.3.9.10 integer read-write
Used to configure the route preference of IBGP.
     swL3ospfAreaTable 1.3.6.1.4.1.171.11.113.9.1.3.10 no-access
Information describing the configured parame- ters and cumulative statistics of the router's attached areas.
           swL3ospfAreaEntry 1.3.6.1.4.1.171.11.113.9.1.3.10.1 no-access
Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas.
               swL3ospfAreaId 1.3.6.1.4.1.171.11.113.9.1.3.10.1.1 areaid read-only
A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.
               swL3ospfAreaType 1.3.6.1.4.1.171.11.113.9.1.3.10.1.2 integer read-only
The type specified for an area. Enumeration: 'stub': 2, 'nssa': 3, 'normal': 1.
               swL3ospfAreaSummaryState 1.3.6.1.4.1.171.11.113.9.1.3.10.1.3 integer read-only
Whether the summary LSA is effective for this area. Enumeration: 'disabled': 2, 'none': 1, 'enabled': 3.
               swL3ospfAreaMetric 1.3.6.1.4.1.171.11.113.9.1.3.10.1.4 integer32 read-write
Enter the metric (1 - 65535; 0 for auto cost) of this area.
               swL3ospfAreaTranslateState 1.3.6.1.4.1.171.11.113.9.1.3.10.1.5 integer read-only
. Enumeration: 'disabled': 2, 'none': 1, 'enabled': 3.
               swL3ospfAreaStatus 1.3.6.1.4.1.171.11.113.9.1.3.10.1.6 rowstatus read-only
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
     swL3dvmrpInterfaceTable 1.3.6.1.4.1.171.11.113.9.1.3.12 no-access
The (conceptual) table listing the router's multicast- capable interfaces.
           swL3dvmrpInterfaceEntry 1.3.6.1.4.1.171.11.113.9.1.3.12.1 no-access
An entry (conceptual row) in the dvmrpInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides.
               swL3dvmrpInterfaceIfIndex 1.3.6.1.4.1.171.11.113.9.1.3.12.1.1 integer32 no-access
The ifIndex value of the interface for which DVMRP is enabled.
               swL3dvmrpInterfaceLocalAddress 1.3.6.1.4.1.171.11.113.9.1.3.12.1.2 ipaddress read-only
The IP address this system will use as a source address on this interface. On unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress for some interface on the system.
               swL3dvmrpInterfaceMetric 1.3.6.1.4.1.171.11.113.9.1.3.12.1.3 integer32 read-only
The distance metric for this interface which is used to calculate distance vectors.
               swL3dvmrpInterfaceProbe 1.3.6.1.4.1.171.11.113.9.1.3.12.1.4 integer32 read-only
Probe distribution interval.
               swL3dvmrpInterfaceNbrTimeout 1.3.6.1.4.1.171.11.113.9.1.3.12.1.5 integer32 read-only
Used to set the timer before neighbors are timed out.
               swL3dvmrpInterfaceStatus 1.3.6.1.4.1.171.11.113.9.1.3.12.1.6 rowstatus read-only
The status of this entry. Creating the entry enables DVMRP on the virtual interface; destroying the entry or setting it to notInService disables DVMRP on the virtual interface.
               swL3dvmrpInterfaceRcvBadPkts 1.3.6.1.4.1.171.11.113.9.1.3.12.1.7 counter32 read-only
The number of DVMRP packets received on the interface by the DVMRP process which were subsequently discarded as invalid (e.g. invalid packet format, or a route report from an unknown neighbor).
               swL3dvmrpInterfaceRcvBadRoutes 1.3.6.1.4.1.171.11.113.9.1.3.12.1.8 counter32 read-only
The number of routes, in valid DVMRP packets, which were ignored because the entry was invalid.
     swL3OspfLsdbMgmt 1.3.6.1.4.1.171.11.113.9.1.3.13
           swL3OspfInternalLsdbTable 1.3.6.1.4.1.171.11.113.9.1.3.13.1 no-access
The OSPF Process's Link State Database.
               swL3OspfInternalLsdbEntry 1.3.6.1.4.1.171.11.113.9.1.3.13.1.1 no-access
A single Link State Advertisement.
                   swL3OspfInternalLsdbAreaId 1.3.6.1.4.1.171.11.113.9.1.3.13.1.1.1 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
                   swL3OspfInternalLsdbType 1.3.6.1.4.1.171.11.113.9.1.3.13.1.1.2 integer read-only
The type of the link state advertisement. Each link state type has a separate advertise- ment format. Enumeration: 'routerLink': 1, 'asSummaryLink': 4, 'asExternalLink': 5, 'nssaExternalLink': 7, 'networkLink': 2, 'multicastLink': 6, 'summaryLink': 3.
                   swL3OspfInternalLsdbLsid 1.3.6.1.4.1.171.11.113.9.1.3.13.1.1.3 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                   swL3OspfInternalLsdbRouterId 1.3.6.1.4.1.171.11.113.9.1.3.13.1.1.4 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                   swL3OspfInternalLsdbMetric 1.3.6.1.4.1.171.11.113.9.1.3.13.1.1.5 integer32 read-only
Enter the metric (1 - 65535; 0 for auto cost) of this area.
                   swL3OspfInternalLsdbSequenceNo 1.3.6.1.4.1.171.11.113.9.1.3.13.1.1.6 octet string read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                   swL3OspfInternalLsdbAge 1.3.6.1.4.1.171.11.113.9.1.3.13.1.1.7 unsigned32 read-only
This field is the age of the link state adver- tisement in seconds.
                   swL3OspfInternalLsdbChecksum 1.3.6.1.4.1.171.11.113.9.1.3.13.1.1.8 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
           swL3OspfExternalLsdbTable 1.3.6.1.4.1.171.11.113.9.1.3.13.2 no-access
The OSPF Process's Links State Database.
               swL3OspfExternalLsdbEntry 1.3.6.1.4.1.171.11.113.9.1.3.13.2.1 no-access
A single Link State Advertisement.
                   swL3OspfExternalLsdbType 1.3.6.1.4.1.171.11.113.9.1.3.13.2.1.1 integer read-only
The type of the link state advertisement. Each link state type has a separate advertise- ment format. Enumeration: 'nssaExternalLink': 7, 'asExternalLink': 5.
                   swL3OspfExternalLsdbLsid 1.3.6.1.4.1.171.11.113.9.1.3.13.2.1.2 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                   swL3OspfExternalLsdbRouterId 1.3.6.1.4.1.171.11.113.9.1.3.13.2.1.3 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                   swL3OspfExternalLsdbMetric 1.3.6.1.4.1.171.11.113.9.1.3.13.2.1.4 integer32 read-only
Enter the metric (1 - 65535; 0 for auto cost) of this area.
                   swL3OspfExternalLsdbMetricType 1.3.6.1.4.1.171.11.113.9.1.3.13.2.1.5 integer read-only
Enter the metric type of this area. Enumeration: 'type-1': 1, 'type-2': 2, 'unrecognized': 0.
                   swL3OspfExternalLsdbSequenceNo 1.3.6.1.4.1.171.11.113.9.1.3.13.2.1.6 octet string read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                   swL3OspfExternalLsdbAge 1.3.6.1.4.1.171.11.113.9.1.3.13.2.1.7 unsigned32 read-only
This field is the age of the link state adver- tisement in seconds.
                   swL3OspfExternalLsdbChecksum 1.3.6.1.4.1.171.11.113.9.1.3.13.2.1.8 integer32 read-only
This field is the checksum of the complete contents of the advertisement, except the age field. The age field is the exception so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
                   swL3OspfExternalLsdbForwardingAddress 1.3.6.1.4.1.171.11.113.9.1.3.13.2.1.9 ipaddress read-only
This field is the forwarding address.
                   swL3OspfExternalLsdbRouteTag 1.3.6.1.4.1.171.11.113.9.1.3.13.2.1.10 octet string read-only
This field is the route tag.
     swL3VrrpOperMgmt 1.3.6.1.4.1.171.11.113.9.1.3.14
           swL3VrrpOperTable 1.3.6.1.4.1.171.11.113.9.1.3.14.1 no-access
Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'swL3vrrpOperEntry' items.
               swL3VrrpOperEntry 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1 no-access
An entry in the vrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IF index and VRID. Rows in the table cannot be modified unless the value of `swL3VrrpOperAdminState' is `disabled' and the `swL3VrrpOperState' has transitioned to `initialize'.
                   swL3VrrpOperIfIndex 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.1 integer32 read-only
The ifIndex value of the interface for which VRRP is enabled.
                   swL3VrrpOperVrId 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.2 vrid read-only
This object contains the Virtual Router Identifier (VRID).
                   swL3VrrpOperVirtualMacAddr 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.3 macaddress read-only
The virtual MAC address of the virtual router. Although this object can be derived from the 'swL3VrrpOperVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps.
                   swL3VrrpOperState 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.4 integer read-only
The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router. Setting the `swL3VrrpOperAdminState' object (below) initiates transitions in the value of this object. Enumeration: 'initialize': 1, 'master': 3, 'backup': 2.
                   swL3VrrpOperAdminState 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.5 integer read-only
This object will enable/disable the virtual router function. Setting the value to `up', will transition the state of the virtual router from `initialize' to `backup' or `master', depending on the value of `swL3VrrpOperPriority'. Setting the value to `down', will transition the router from `master' or `backup' to `initialize'. State transitions may not be immediate; they sometimes depend on other factors, such as the interface (IF) state. The `swL3VrrpOperAdminState' object must be set to `down' prior to modifying the other read-create objects in the conceptual row. The value of the `swL3VrrpOperRowStatus' object (below) must be `active', signifying that the conceptual row is valid (i.e., the objects are correctly set), in order for this object to be set to `up'. Enumeration: 'down': 2, 'up': 1.
                   swL3VrrpOperPriority 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.6 integer32 read-only
This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es).
                   swL3VrrpOperMasterIpAddr 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.7 ipaddress read-only
The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router.
                   swL3VrrpOperCriticalIpAddr 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.8 ipaddress read-only
In the case where there is more than one IP address for a given `ifIndex', this object is used to specify the IP address that will become the `swL3VrrpOperMasterIpAddr', should the virtual router transition from backup to master. If this object is set to 0.0.0.0, the IP address which is numerically lowest will be selected.
                   swL3VrrpOperCheckCriticalIpState 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.9 integer read-only
Critical IP state. Enumeration: 'disabled': 1, 'other': 0, 'enabled': 2.
                   swL3VrrpOperAuthType 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.10 integer read-only
Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track. Enumeration: 'noAuthentication': 1, 'ipAuthenticationHeader': 3, 'simpleTextPassword': 2.
                   swL3VrrpOperAuthKey 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.11 octet string read-only
The Authentication Key. This object is set according to the value of the 'swL3VrrpOperAuthType' object ('simpleTextPassword' or 'ipAuthenticationHeader'). If the length of the value is less than 16 octets, the agent will left adjust and zero fill to 16 octets. The value of this object is the same for a given ifIndex. When read, swL3VrrpOperAuthKey always returns an Octet String of length zero.
                   swL3VrrpOperAdvertisementInterval 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.12 integer32 read-only
The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements.
                   swL3VrrpOperPreemptMode 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.13 truthvalue read-only
Controls whether a higher priority virtual router will preempt a lower priority master.
                   swL3VrrpOperVirtualRouterUpTime 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.14 timestamp read-only
This is the value of the `sysUpTime' object when this virtual router (i.e., the `swL3VrrpOperState') transitioned out of `initialized'.
                   swL3VrrpOperVirtualIpAddr 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.15 ipaddress read-only
The assigned IP addresses that a virtual router is responsible for backing up.
                   swL3VrrpOperRowStatus 1.3.6.1.4.1.171.11.113.9.1.3.14.1.1.16 rowstatus read-only
The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the vrrpOperTable is constrained by the operational state of the corresponding virtual router. When `vrrpOperRowStatus' is set to active(1), no other objects in the conceptual row, with the exception of `swL3VrrpOperAdminState', can be modified. Prior to setting the `swL3VrrpOperRowStatus' object from `active' to a different value, the `swL3VrrpOperAdminState' object must be set to `down' and the `vrrpOperState' object be transitioned to `initialize'. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpOperRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `swL3VrrpOperVrId' has been set and there is at least one active row in the `swL3VrrpAssoIpAddrTable' defining an associated IP address for the virtual router.
     swL3OspfECMPMgmt 1.3.6.1.4.1.171.11.113.9.1.3.15
           swL3OspfECMPIpDestination 1.3.6.1.4.1.171.11.113.9.1.3.15.1 integer read-write
If set to 'enabled (1)', the ECMP algorithm will include the destination IP. Enumeration: 'disabled': 2, 'enabled': 1.
           swL3OspfECMPIpSource 1.3.6.1.4.1.171.11.113.9.1.3.15.2 integer read-write
If set to 'enabled (1)', the ECMP algorithm will include the lower 5 bits of the source IP. This attribution is mutually exclusive with crc_low and crc_high. If set to 'enabled (1)', crc_low and crc_high will be excluded. Enumeration: 'disabled': 2, 'enabled': 1.
           swL3OspfECMPCrcLow 1.3.6.1.4.1.171.11.113.9.1.3.15.3 integer read-write
If set to 'enabled (1)', the ECMP algorithm will include the lower 5 bits of the CRC. This attribution is mutually exclusive with crc_high and ip_source. If set to 'enabled (1)', crc_high and ip_source will be excluded. Enumeration: 'disabled': 2, 'enabled': 1.
           swL3OspfECMPCrcHigh 1.3.6.1.4.1.171.11.113.9.1.3.15.4 integer read-write
If set to 'enabled (1)', the ECMP algorithm will include the upper 5 bits of the CRC. This attribution is mutually exclusive with ip_source and crc_low. If set to 'enabled (1)', crc_low and ip_source will be excluded. Enumeration: 'disabled': 2, 'enabled': 1.
           swL3OspfECMPTCPorUDPport 1.3.6.1.4.1.171.11.113.9.1.3.15.5 integer read-write
If set to 'enabled (1)', the ECMP algorithm will include the TCP or UDP port. Enumeration: 'disabled': 2, 'enabled': 1.
           swL3OspfECMPState 1.3.6.1.4.1.171.11.113.9.1.3.15.6 integer read-write
This object indicates the state of the OSPF ECMP function. Enumeration: 'disabled': 2, 'enabled': 1.
     swL3LocalRouteMgmt 1.3.6.1.4.1.171.11.113.9.1.3.16
           swL3LocalRouteIPv4GlobalState 1.3.6.1.4.1.171.11.113.9.1.3.16.1 integer read-write
This object indicates the IPv4 local route state of the device. Enumeration: 'disabled': 2, 'enabled': 1.
           swL3LocalRouteIPv6GlobalState 1.3.6.1.4.1.171.11.113.9.1.3.16.2 integer read-write
This object indicates the IPv6 local route state of the device. Enumeration: 'disabled': 2, 'enabled': 1.
     swL3RIPTimerMgmt 1.3.6.1.4.1.171.11.113.9.1.3.17
           swL3RIPUpdateTime 1.3.6.1.4.1.171.11.113.9.1.3.17.1 integer read-write
This object indicates the RIP update interval.
           swL3RIPTimeOutTime 1.3.6.1.4.1.171.11.113.9.1.3.17.2 integer read-write
This object indicates the period for which a dynamic RIP route will be kept in the IPv4 routing table without receiving any updates for the route. After this time interval, the route will be invalid and will be aged out.
           swL3RIPGarbageCollectionTime 1.3.6.1.4.1.171.11.113.9.1.3.17.3 integer read-write
This object indicates the period for a RIP route which has aged out is retained in the IPv4 Routing Table. After this time interval the route is deleted from the IPv4 Routing Table.