DES3200-28P-L2MGMT-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DES3200-28P-L2MGMT-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swL2MgmtMIB 1.3.6.1.4.1.171.11.113.8.1.2
The Structure of Layer 2 Network Management Information.
     swL2DevMgmt 1.3.6.1.4.1.171.11.113.8.1.2.1
         swL2DevInfo 1.3.6.1.4.1.171.11.113.8.1.2.1.1
             swDevInfoTotalNumOfPort 1.3.6.1.4.1.171.11.113.8.1.2.1.1.1 integer read-only
The number of ports within this switch. This value is the sum of the ports within this switch.
             swDevInfoNumOfPortInUse 1.3.6.1.4.1.171.11.113.8.1.2.1.1.2 integer read-only
The number of ports in this switch connected to the segment or the end stations.
             swDevModuleInfoTable 1.3.6.1.4.1.171.11.113.8.1.2.1.1.3 no-access
This table contains the module information.
                 swDevModuleInfoEntry 1.3.6.1.4.1.171.11.113.8.1.2.1.1.3.1 no-access
A list of management information for each unit in the system.
                     swDevModuleInfoUnitID 1.3.6.1.4.1.171.11.113.8.1.2.1.1.3.1.1 integer read-only
This object indicates the specific unit ID in the stacking/chassis table.
                     swDevModuleInfoModuleName 1.3.6.1.4.1.171.11.113.8.1.2.1.1.3.1.3 displaystring read-only
A text string containing the name of the module.
                     swDevModuleInfoReversion 1.3.6.1.4.1.171.11.113.8.1.2.1.1.3.1.4 displaystring read-only
A text string containing the version (name or number) of the module.
                     swDevModuleInfoSerial 1.3.6.1.4.1.171.11.113.8.1.2.1.1.3.1.5 displaystring read-only
A text string containing the serial number or serial name of the module.
                     swDevModuleInfoDescription 1.3.6.1.4.1.171.11.113.8.1.2.1.1.3.1.6 displaystring read-only
A text string containing a description of the module.
             swDevInfoFrontPanelLedStatus 1.3.6.1.4.1.171.11.113.8.1.2.1.1.4 octet string read-only
This object is a set of system LED indications. The first two octets indicate the LED PoE mode. 01 02 = PoE Mode 02 01 = Normal Mode 00 00 = Non-PoE Device The next two are defined as system LED. The third octet is power LED. 0x01 : Power Off 0x02 : Power On the forth octet is console led: 0x01 = system start up 0x02 = a user is login through console 0x03 = no user is login through console The fifth octect is RPS (Redundancy Power Supply) LED. 0x01 = Ineternal Power working 0x02 = External Power working The sixth octect is FAN LED 0x01 = Fan LED Off 0x02 = Fan LED blinking The other octets following are the logical port LED (following dot1dBasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED. Link/Activity LED: The most significant bit is used for blink/solid: 8 = The LED blinks. The second significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED: Normal Mode bit 4 : 0 = copper link up (if link fail will show 0) 1 = fibber link up bit 2-0 : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. 04 = 10000Mbps POE mode: 01 = no PD connected. 02 = no deliver power to PD. 03 = deliver power to PD.
         swL2DevCtrl 1.3.6.1.4.1.171.11.113.8.1.2.1.2
             swL2DevCtrlStpState 1.3.6.1.4.1.171.11.113.8.1.2.1.2.1 integer read-write
This object can enable or disable the spanning tree algorithm during the runtime of the system. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlIGMPSnooping 1.3.6.1.4.1.171.11.113.8.1.2.1.2.2 integer read-write
This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlIGMPSnoopingMcstRTOnly 1.3.6.1.4.1.171.11.113.8.1.2.1.2.3 integer read-write
This object controls the IGMP snooping forward multicast routing only state. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlRmonState 1.3.6.1.4.1.171.11.113.8.1.2.1.2.4 integer read-write
This object can enable or disable RMON. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlSnmpTrapState 1.3.6.1.4.1.171.11.113.8.1.2.1.2.5 integer read-write
This object controls the SNMP trap status. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlCleanAllStatisticCounter 1.3.6.1.4.1.171.11.113.8.1.2.1.2.6 integer read-write
When the object is set to active, all statistical counters will be cleared. If set to normal, no action will occur. Enumeration: 'active': 2, 'normal': 1.
             swL2DevCtrlVlanIdOfFDBTbl 1.3.6.1.4.1.171.11.113.8.1.2.1.2.7 vlanid read-write
Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is the DEFAULT_VLAN_ID of the system.
             swL2MACNotifyState 1.3.6.1.4.1.171.11.113.8.1.2.1.2.8 integer read-write
This object can enable or disable MAC Notification. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2MACNotifyHistorySize 1.3.6.1.4.1.171.11.113.8.1.2.1.2.9 integer read-write
This object indicates the history size of MAC addresses in the MAC Address table. The default value is 1.
             swL2MACNotifyInterval 1.3.6.1.4.1.171.11.113.8.1.2.1.2.10 integer read-write
This object indicates the time interval, in seconds, that will trigger MAC notification messages.
             swL2DevCtrlAsymVlanState 1.3.6.1.4.1.171.11.113.8.1.2.1.2.13 integer read-write
This object enables or disables asymmetric VLANs during the runtime of the system. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlTelnet 1.3.6.1.4.1.171.11.113.8.1.2.1.2.14
                   swL2DevCtrlTelnetState 1.3.6.1.4.1.171.11.113.8.1.2.1.2.14.1 integer read-write
This object controls the Telnet status. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2DevCtrlTelnetTcpPort 1.3.6.1.4.1.171.11.113.8.1.2.1.2.14.2 integer read-write
This object designates TCP ports. When Telnet is disabled, this object is not accessible.
             swL2DevCtrlManagementVlanId 1.3.6.1.4.1.171.11.113.8.1.2.1.2.16 vlanid read-write
This object controls which previously created VLANs are included in the System IP Interface.
             swL2DevCtrlWeb 1.3.6.1.4.1.171.11.113.8.1.2.1.2.17
                   swL2DevCtrlWebState 1.3.6.1.4.1.171.11.113.8.1.2.1.2.17.1 integer read-write
This object controls the Web status. Enumeration: 'disabled': 2, 'enabled': 1.
                   swL2DevCtrlWebTcpPort 1.3.6.1.4.1.171.11.113.8.1.2.1.2.17.2 integer read-write
This object designates TCP ports. When Web is disabled, this object is not accessible.
             swL2DevCtrlLLDPState 1.3.6.1.4.1.171.11.113.8.1.2.1.2.18 integer read-write
Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For receiving LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlLLDPForwardMessageState 1.3.6.1.4.1.171.11.113.8.1.2.1.2.19 integer read-write
When lldp is disabled and lldp forward_message's are enabled, the LLDP Data Unit packets received by the switch will be forwarded. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlIpAutoconfig 1.3.6.1.4.1.171.11.113.8.1.2.1.2.20 integer read-write
This object controls the IP auto configuration state. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlCFM 1.3.6.1.4.1.171.11.113.8.1.2.1.2.21
                   swL2DevCtrlCFMState 1.3.6.1.4.1.171.11.113.8.1.2.1.2.21.1 integer read-write
This object indicates the CFM global state. Enumeration: 'disabled': 2, 'enabled': 1.
                   swL2DevCtrlCFMPortTable 1.3.6.1.4.1.171.11.113.8.1.2.1.2.21.2 no-access
A table containing the CFM state of specified ports.
                       swL2DevCtrlCFMPortEntry 1.3.6.1.4.1.171.11.113.8.1.2.1.2.21.2.1 no-access
The entry of the CFM state on specified ports.
                           swL2DevCtrlCFMPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.1.2.21.2.1.1 integer no-access
This object indicates the port number.
                           swL2DevCtrlCFMPortState 1.3.6.1.4.1.171.11.113.8.1.2.1.2.21.2.1.2 integer read-write
This object indicates the CFM state by port. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlVLANTrunkState 1.3.6.1.4.1.171.11.113.8.1.2.1.2.22 integer read-write
This indicates the global state of the VLAN trunking feature of the device. Enumeration: 'disabled': 2, 'enabled': 1.
         swL2DevAlarm 1.3.6.1.4.1.171.11.113.8.1.2.1.3
             swL2DevAlarmNewRoot 1.3.6.1.4.1.171.11.113.8.1.2.1.3.1 integer read-write
When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevAlarmTopologyChange 1.3.6.1.4.1.171.11.113.8.1.2.1.3.2 integer read-write
This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled (3), the Topology Change trap is sent by the device when any of its configured ports transition from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device does not send the trap if this object value is disabled or in another state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.113.8.1.2.1.3.3 integer read-write
This object determines whether or not to send a trap message when the link changes. If the object is enabled (3), the Link Change trap is sent by the device when any of its port links change. The device does not send the trap if this object value is disabled or in another state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2VLANMgmt 1.3.6.1.4.1.171.11.113.8.1.2.2
         swL2VlanStaticTable 1.3.6.1.4.1.171.11.113.8.1.2.2.1 no-access
A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset.
             swL2VlanStaticEntry 1.3.6.1.4.1.171.11.113.8.1.2.2.1.1 no-access
Static information for a VLAN configured into this device by (local or network) management.
                 swL2VlanIndex 1.3.6.1.4.1.171.11.113.8.1.2.2.1.1.1 vlanid no-access
The VLAN-ID or other identifier referring to this VLAN.
                 swL2VLANAdvertisement 1.3.6.1.4.1.171.11.113.8.1.2.2.1.1.2 integer read-write
This object indicates if the advertisement is active or not. Enumeration: 'disabled': 2, 'enabled': 1.
         swL2PVIDAutoAssignmentState 1.3.6.1.4.1.171.11.113.8.1.2.2.2 integer read-write
This object controls the PVID auto assignment state. If 'Auto-assign PVID' is disabled, the PVID can only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change the PVID. If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. Using the VLAN list command, PVID is updated as the last item of the VLAN list. When a user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned 'default VLAN'. Enumeration: 'disabled': 2, 'enabled': 1.
         swL2VlanPortInfoTable 1.3.6.1.4.1.171.11.113.8.1.2.2.3 no-access
A table containing the VLAN and port role information of each port.
             swL2VlanPortInfoEntry 1.3.6.1.4.1.171.11.113.8.1.2.2.3.1 no-access
The table entry of VLAN port information.
                 swL2VlanPortInfoPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.2.3.1.1 integer read-only
The port index.
                 swL2VlanPortInfoVid 1.3.6.1.4.1.171.11.113.8.1.2.2.3.1.2 vlanid read-only
The VLAN ID assigned to a special port
                 swL2VlanPortInfoPortRole 1.3.6.1.4.1.171.11.113.8.1.2.2.3.1.3 integer read-only
The port role of a special port. When the role is 'other', it means this port does not belong to the VLAN. Enumeration: 'untagged': 2, 'tagged': 3, 'other': 1, 'dynamic': 4, 'forbidden': 5.
         swL2SubnetVLANTable 1.3.6.1.4.1.171.11.113.8.1.2.2.4 no-access
A table containing the subnet VLAN information.
             swL2SubnetVLANEntry 1.3.6.1.4.1.171.11.113.8.1.2.2.4.1 no-access
The entry of subnet VLAN information.
                 swL2SubnetVLANIPAddress 1.3.6.1.4.1.171.11.113.8.1.2.2.4.1.1 ipaddress read-only
This object indicates the IP address.
                 swL2SubnetVLANIPMask 1.3.6.1.4.1.171.11.113.8.1.2.2.4.1.2 ipaddress read-only
This object indicates the IP mask.
                 swL2SubnetVLANID 1.3.6.1.4.1.171.11.113.8.1.2.2.4.1.3 vlanid read-only
This object indicates the VLAN ID.
                 swL2SubnetVLANPriority 1.3.6.1.4.1.171.11.113.8.1.2.2.4.1.4 integer read-only
This object indicates the priority.
                 swL2SubnetVLANRowStatus 1.3.6.1.4.1.171.11.113.8.1.2.2.4.1.5 rowstatus read-only
This object indicates the status of this entry.
         swL2VlanPrecedenceTable 1.3.6.1.4.1.171.11.113.8.1.2.2.5 no-access
A table containing the VLAN classification precedence information of each port.
             swL2VlanPrecedenceEntry 1.3.6.1.4.1.171.11.113.8.1.2.2.5.1 no-access
The entry of VLAN classification precedence information.
                 swL2VlanPrecedencePortIndex 1.3.6.1.4.1.171.11.113.8.1.2.2.5.1.1 integer read-only
This object indicates the port index.
                 swL2VlanPrecedenceClassification 1.3.6.1.4.1.171.11.113.8.1.2.2.5.1.2 integer read-write
This object indicates the VLAN classification precedence. Enumeration: 'mac-based': 1, 'subnet-based': 2.
         swL2NniGvrpBpduAddress 1.3.6.1.4.1.171.11.113.8.1.2.2.6 integer read-write
Specifies the GVRP's BPDU MAC address of the NNI port with Q-in-Q status. Enumeration: 'dot1d': 1, 'dot1ad': 2.
     swL2PortMgmt 1.3.6.1.4.1.171.11.113.8.1.2.3
         swL2PortInfoTable 1.3.6.1.4.1.171.11.113.8.1.2.3.1 no-access
A table that contains information about every port.
             swL2PortInfoEntry 1.3.6.1.4.1.171.11.113.8.1.2.3.1.1 no-access
A list of information for each port of the device.
                 swL2PortInfoPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.3.1.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortInfoMediumType 1.3.6.1.4.1.171.11.113.8.1.2.3.1.1.2 integer read-only
Indicates the medium type of the port number. Enumeration: 'copper': 1, 'fiber': 2.
                 swL2PortInfoUnitID 1.3.6.1.4.1.171.11.113.8.1.2.3.1.1.3 integer read-only
Indicates the ID of the unit in the system.
                 swL2PortInfoType 1.3.6.1.4.1.171.11.113.8.1.2.3.1.1.4 integer read-only
This object indicates the connector type of this port. Enumeration: 'portType-1000Base-TX': 4, 'portType-1000Base-none-GBIC': 12, 'portType-10G-xfp-empty': 24, 'portType-SIO': 17, 'portType-100Base-TX': 1, 'portType-1000Base-none-MGBIC': 16, 'portType-10G-xenpak-1310nm': 19, 'portType-10G-xenpak-850nm': 20, 'portType-10G-xfp-1310nm': 22, 'portType-1000Base-TX-MGBIC': 15, 'portType-none': 25, 'portType-10G-xfp-850nm': 23, 'portType-10G': 18, 'portType-1000Base-SX-MGBIC': 13, 'portType-1000Base-TX-GBIC': 9, 'portType-10G-xenpak-empty': 21, 'portType-1000Base-SX': 5, 'portType-1000Base-LX-MGBIC': 14, 'portType-1000Base-LX': 6, 'portType-1000Base-1394': 10, 'portType-100Base-FX': 2, 'portType-1000Base-SX-GBIC': 7, 'portType-100Base-FL': 3, 'portType-1000Base-TX-GBIC-COMBO': 11, 'portType-1000Base-LX-GBIC': 8.
                 swL2PortInfoLinkStatus 1.3.6.1.4.1.171.11.113.8.1.2.3.1.1.5 integer read-only
This object indicates the port link status. Enumeration: 'link-fail': 3, 'other': 1, 'link-pass': 2.
                 swL2PortInfoNwayStatus 1.3.6.1.4.1.171.11.113.8.1.2.3.1.1.6 integer read-only
This object indicates the port speed and duplex mode. Enumeration: 'half-10Mbps': 3, 'full-1Gigabps': 8, 'full-100Mbps': 6, 'half-1Gigabps': 7, 'full-10Mbps': 4, 'other': 0, 'full-10Gigabps': 9, 'link-down': 2, 'half-100Mbps': 5, 'empty': 1.
                 swL2PortInfoModuleType 1.3.6.1.4.1.171.11.113.8.1.2.3.1.1.7 integer read-only
This object indicates the module type of this port. Enumeration: 'moduleType-1394': 2, 'moduleType-COMBO': 1, 'moduleType-1P-MTRJ-LX': 13, 'moduleType-1000T': 3, 'moduleType-1P-MTRJ-SX': 11, 'moduleType-1P-GBIC-1P-STACK': 18, 'moduleType-2P-STACK': 19, 'moduleType-2P-MTRJ-LX': 14, 'moduleType-2P-100TX': 25, 'moduleType-1P-100FX': 21, 'moduleType-2P-SC-LX': 8, 'moduleType-MGBIC': 4, 'moduleType-1P-TX': 9, 'moduleType-2P-MTRJ-SX': 12, 'moduleType-2P-TX': 10, 'moduleType-1P-GBIC': 15, 'moduleType-1P-100FL': 23, 'moduleType-1P-SC-LX': 7, 'none': 0, 'moduleType-1P-SC-SX': 5, 'moduleType-2P-GBIC': 16, 'moduleType-2P-100FL': 24, 'moduleType-BaseModule-24PORT': 26, 'moduleType-2P-100FX-NEW': 22, 'moduleType-2P-SC-SX': 6, 'moduleType-1P-GBIC-1P-TX': 17, 'moduleType-2P-100FX': 20.
                 swL2PortInfoErrorDisabled 1.3.6.1.4.1.171.11.113.8.1.2.3.1.1.8 integer read-only
This object indicates the blocking type of this port. Enumeration: 'unknow': 3, 'none': 0, 'lbd': 2, 'storm': 1.
         swL2PortCtrlTable 1.3.6.1.4.1.171.11.113.8.1.2.3.2 no-access
A table that contains control information about every port.
             swL2PortCtrlEntry 1.3.6.1.4.1.171.11.113.8.1.2.3.2.1 no-access
A list of control information for each port on the device.
                 swL2PortCtrlPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.3.2.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortCtrlMediumType 1.3.6.1.4.1.171.11.113.8.1.2.3.2.1.2 integer read-only
Indicates the medium type of the port number. Enumeration: 'copper': 1, 'fiber': 2.
                 swL2PortCtrlUnitIndex 1.3.6.1.4.1.171.11.113.8.1.2.3.2.1.3 integer read-only
Indicates the ID of the unit in the device
                 swL2PortCtrlAdminState 1.3.6.1.4.1.171.11.113.8.1.2.3.2.1.4 integer read-write
This object decides if the port is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlNwayState 1.3.6.1.4.1.171.11.113.8.1.2.3.2.1.5 integer read-write
Chose the port speed, duplex mode, and N-Way function mode. Enumeration: 'nway-disabled-10Mbps-Full': 4, 'nway-disabled-1Gigabps-Full-master': 9, 'nway-enabled': 2, 'nway-disabled-1Gigabps-Full': 8, 'nway-disabled-1Gigabps-Full-slave': 10, 'other': 1, 'nway-disabled-100Mbps-Full': 6, 'nway-disabled-1Gigabps-Half': 7, 'nway-disabled-10Mbps-Half': 3, 'nway-disabled-100Mbps-Half': 5.
                 swL2PortCtrlFlowCtrlState 1.3.6.1.4.1.171.11.113.8.1.2.3.2.1.6 integer read-write
The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, the IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlLearningState 1.3.6.1.4.1.171.11.113.8.1.2.3.2.1.7 integer read-write
This object decides if the port is locked or not. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlMACNotifyState 1.3.6.1.4.1.171.11.113.8.1.2.3.2.1.8 integer read-write
This object sets each port's MAC notification state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlMDIXState 1.3.6.1.4.1.171.11.113.8.1.2.3.2.1.10 integer read-write
This object configures the MDIX setting of the port. Enumeration: 'auto': 1, 'cross': 3, 'normal': 2.
                 swL2PortCtrlAutoNegRestart 1.3.6.1.4.1.171.11.113.8.1.2.3.2.1.11 integer read-write
If the value of this object is set to restart(1) then this will force auto-negotiation to begin link renegotiation. If auto-negotiation signaling is disabled, a write to this object has no effect. Setting the value of this object to norestart(2) has no effect. Enumeration: 'norestart': 2, 'restart': 1.
                 swL2PortCtrlAutoNegCapAdvertisedBits 1.3.6.1.4.1.171.11.113.8.1.2.3.2.1.12 ianaifmauautonegcapbits read-write
A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in swL2PortAutoNegInfoCapabilityBits cannot be enabled. Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
         swL2PortCtrlJumboFrame 1.3.6.1.4.1.171.11.113.8.1.2.3.3 integer read-write
This object configures the switch's jumbo frame settings. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swL2PortCtrlJumboFrameMaxSize 1.3.6.1.4.1.171.11.113.8.1.2.3.4 integer read-only
This object describes how many bytes the max jumbo frame is.
         swL2PortCableDiagnosisTable 1.3.6.1.4.1.171.11.113.8.1.2.3.5 no-access
A table that contains cable diagnostic information about every port.
             swL2PortCableDiagnosisEntry 1.3.6.1.4.1.171.11.113.8.1.2.3.5.1 no-access
A list with cable diagnostic information for each port of the device.
                 swL2PortCableDiagnosisPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.3.5.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortCableDiagnosisPairIndex 1.3.6.1.4.1.171.11.113.8.1.2.3.5.1.2 integer read-only
Indicates the pair index of each port. Pair 1 means pin 3 and 6 of the connector. Pair 2 means pin 1 and 2 of the connector. Pair 3 means pin 7 and 8 of the connector. Pair 4 means pin 4 and 5 of the connector.
                 swL2PortCableDiagnosisCableStatus 1.3.6.1.4.1.171.11.113.8.1.2.3.5.1.3 integer read-only
This object indicates the cable status. Enumeration: 'not-support': 4, 'short': 2, 'ok': 0, 'unknown': 5, 'open-short': 3, 'open': 1.
                 swL2PortCableDiagnosisPairStatus 1.3.6.1.4.1.171.11.113.8.1.2.3.5.1.4 integer read-only
This object indicates the status of the pair. Enumeration: 'short': 2, 'ok': 0, 'unknown': 5, 'not-supported': 4, 'fail': 3, 'open': 1.
                 swL2PortCableDiagnosisPairLength 1.3.6.1.4.1.171.11.113.8.1.2.3.5.1.5 integer read-only
This object indicates the approx. length or length to failure of the pair. The unit value is in meters.
                 swL2PortCableDiagnosisPairLengthInaccuracy 1.3.6.1.4.1.171.11.113.8.1.2.3.5.1.6 integer read-only
This object indicates the inaccuracy of a pair length. The unit value is in meters.
         swL2PortCounterCtrlTable 1.3.6.1.4.1.171.11.113.8.1.2.3.6 no-access
A table that is used to clear counter information about every port.
             swL2PortCounterCtrlEntry 1.3.6.1.4.1.171.11.113.8.1.2.3.6.1 no-access
A list of entries used to clear the counter information for each port of the device.
                 swL2PortCounterCtrlPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.3.6.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortCounterClearCtrl 1.3.6.1.4.1.171.11.113.8.1.2.3.6.1.2 integer read-write
This object indicates whether to clear the counters for each port of the device or not. Enumeration: 'start': 2, 'other': 1.
         swL2PortErrTable 1.3.6.1.4.1.171.11.113.8.1.2.3.7 no-access
A table that contains error information for each port.
             swL2PortErrEntry 1.3.6.1.4.1.171.11.113.8.1.2.3.7.1 no-access
A list of information regarding port errors on the device.
                 swL2PortErrPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.3.7.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module).
                 swL2PortErrPortState 1.3.6.1.4.1.171.11.113.8.1.2.3.7.1.2 integer read-only
This object indicates if the port state is enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                 swL2PortErrPortConnStatus 1.3.6.1.4.1.171.11.113.8.1.2.3.7.1.3 integer read-only
This object indicates whether the Port Status is err-disabled or not. Enumeration: 'other': 1, 'err-disabled': 2.
                 swL2PortErrPortReason 1.3.6.1.4.1.171.11.113.8.1.2.3.7.1.4 integer read-only
This object describes if the reason for the port error is STP LBD or Storm control. Enumeration: 'stp-lbd': 1, 'storm-control': 2.
         swL2PortAutoNegInfoTable 1.3.6.1.4.1.171.11.113.8.1.2.3.8 no-access
A table that contains information about every port's auto negotiation status.
             swL2PortAutoNegInfoEntry 1.3.6.1.4.1.171.11.113.8.1.2.3.8.1 no-access
A list of information for each port auto negotiation of the device.
                 swL2PortAutoNegInfoPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.3.8.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortAutoNegInfoAdminStatus 1.3.6.1.4.1.171.11.113.8.1.2.3.8.1.2 integer read-only
If the value of this object is disabled(2) then the interface will act as it would if it had no auto-negotiation signaling. The status is affect by setting swL2PortCtrlNwayState. Enumeration: 'disabled': 2, 'enabled': 1.
                 swL2PortAutoNegInfoCapabilityBits 1.3.6.1.4.1.171.11.113.8.1.2.3.8.1.3 ianaifmauautonegcapbits read-only
A value that uniquely identifies the set of capabilities of the local auto-negotiation entity. Note that interfaces that support this MIB may have capabilities that extend beyond the scope of this MIB. Note that the local auto-negotiation entity may support some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
                 swL2PortAutoNegInfoCapAdvertisedBits 1.3.6.1.4.1.171.11.113.8.1.2.3.8.1.4 ianaifmauautonegcapbits read-only
A value that uniquely identifies the set of capabilities advertised by the local auto-negotiation entity. Capabilities in this object that are not available in swL2PortAutoNegCapabilityBits cannot be enabled. Note that the local auto-negotiation entity may advertise some capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
                 swL2PortAutoNegInfoCapReceivedBits 1.3.6.1.4.1.171.11.113.8.1.2.3.8.1.5 ianaifmauautonegcapbits read-only
A value that uniquely identifies the set of capabilities received from the remote auto-negotiation entity. Note that interfaces that support this MIB may be attached to remote auto-negotiation entities that have capabilities beyond the scope of this MIB. This is indicated by returning the bit value bOther in addition to any bit values for standard capabilities that are listed in the IANAifMauAutoNegCapBits TC.
         swL2PortDropCounterTable 1.3.6.1.4.1.171.11.113.8.1.2.3.9 no-access
A table that contains information for each port drop counter.
             swL2PortDropCounterEntry 1.3.6.1.4.1.171.11.113.8.1.2.3.9.1 no-access
A list of information for each port auto negotiation of the device.
                 swL2PortDropCounterPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.3.9.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortBufferFullDrops 1.3.6.1.4.1.171.11.113.8.1.2.3.9.1.2 counter read-only
The total number of packets discarded while buffer full.
                 swL2PortACLDrops 1.3.6.1.4.1.171.11.113.8.1.2.3.9.1.3 counter read-only
The total number of packets denied by ACLs.
                 swL2PortMulticastDrops 1.3.6.1.4.1.171.11.113.8.1.2.3.9.1.4 counter read-only
The total number of multicast packet that is discarded.
                 swL2PortVLANIngressDrops 1.3.6.1.4.1.171.11.113.8.1.2.3.9.1.5 counter read-only
The total number of packets discarded by VLAN ingress checking.
         swL2PortJumboFrameCtrlTable 1.3.6.1.4.1.171.11.113.8.1.2.3.10 no-access
A table that contains information for each port's jumbo frame information.
               swL2PortJumboFrameCtrlEntry 1.3.6.1.4.1.171.11.113.8.1.2.3.10.1 no-access
A list of information for each port's jumbo frame of the device.
                   swL2PortJumboFrameCtrlPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.3.10.1.1 integer no-access
This object indicates the module's port number.
                   swL2PortJumboFrameCtrlState 1.3.6.1.4.1.171.11.113.8.1.2.3.10.1.2 integer read-write
This object indicates the jumbo frame state on a specified port. Enumeration: 'disabled': 2, 'enabled': 1.
     swL2DiffServMgmt 1.3.6.1.4.1.171.11.113.8.1.2.4
         swL2DiffServTypeCtrlTable 1.3.6.1.4.1.171.11.113.8.1.2.4.1 no-access
A table that contains the Differentiated Service (DiffServ) type information of each port.
             swL2DiffServTypeCtrlEntry 1.3.6.1.4.1.171.11.113.8.1.2.4.1.1 no-access
A list of DiffServ type information for each port of the device.
                 swL2DiffServTypeCtrlPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.4.1.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2DiffServTypeCtrlDiffServType 1.3.6.1.4.1.171.11.113.8.1.2.4.1.1.2 integer read-write
The DiffServ type of this port. disabled (1) --- no DiffServ and ToS field modification ability. DSCP (2) --- indicates if the associated port's DSCP control information is in the swL2DiffServDSCPCtrlTable will take effect upon replacement of the DSCP(DiffServ codepoint) field. ToS (3) --- indicates if the associated port's ToS control information in the swL2DiffServTOSCtrlTable will take effect for the replacement of the IP ToS precedence and the 802.1p tag control priority field. Enumeration: 'disabled': 1, 'tos': 3, 'dscp': 2.
         swL2DiffServDSCPCtrlTable 1.3.6.1.4.1.171.11.113.8.1.2.4.2 no-access
A table that contains DSCP (Differentiated Service Code Point) control information.
             swL2DiffServDSCPCtrlEntry 1.3.6.1.4.1.171.11.113.8.1.2.4.2.1 no-access
A list of DSCP control information for each port.
                 swL2DiffServDSCPCtrlPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.4.2.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2DiffServDSCPCtrlMode 1.3.6.1.4.1.171.11.113.8.1.2.4.2.1.2 integer read-write
The DSCP mode of this port. dscp-Force-Overwrite(1) --- The DSCP field for the IP packet is replaced by the specific value regardless of the DSCP of the incoming packet. dscp-Change-If-Zero(2) --- The DSCP field for the IP packet is replaced by the specific value if the DSCP of the incoming packet is zero. Enumeration: 'dscp-Force-Overwrite': 1, 'dscp-Change-If-Zero': 2.
                 swL2DiffServDSCPCtrlValue 1.3.6.1.4.1.171.11.113.8.1.2.4.2.1.3 integer read-write
The DSCP value of this port.
         swL2DiffServTOSCtrlTable 1.3.6.1.4.1.171.11.113.8.1.2.4.3 no-access
A table that contains ToS (Type of Service) control information.
             swL2DiffServTOSCtrlEntry 1.3.6.1.4.1.171.11.113.8.1.2.4.3.1 no-access
A list of ToS control information for each port.
                 swL2DiffServTOSCtrlPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.4.3.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2DiffServTOSCtrlMode 1.3.6.1.4.1.171.11.113.8.1.2.4.3.1.2 integer read-write
The ToS mode of this port. tos-Force-Overwrite(1) --- The IP ToS precedence has changed to the specific value. tos-TOS-Overwrite-802dot1p(2) --- If the incoming packet is an IPv4 packet, change the 802.1p tag control priority field to the value in the IP ToS precedence field. tos-802dot1p-Overwrite-TOS(3) --- If the incoming packet is an IPv4 packet, the IP ToS precedence is changed to the value in the 802.1p tag control priority field. Enumeration: 'tos-802dot1p-Overwrite-TOS': 3, 'tos-TOS-Overwrite-802dot1p': 2, 'tos-Force-Overwrite': 1.
                 swL2DiffServTOSCtrlValue 1.3.6.1.4.1.171.11.113.8.1.2.4.3.1.3 integer read-write
This object is used only if swL2DiffServTOSCtrlMode is tos-Force-Overwrite(1)
     swL2LimitedMulticastMgmt 1.3.6.1.4.1.171.11.113.8.1.2.5
         swL2MulticastFilterProfileTable 1.3.6.1.4.1.171.11.113.8.1.2.5.1 no-access
A table that contains information about multicast filter profile.
             swL2MulticastFilterProfileEntry 1.3.6.1.4.1.171.11.113.8.1.2.5.1.1 no-access
A list of information for each multicast filter profile.
                 swL2MulticastFilterProfileIndex 1.3.6.1.4.1.171.11.113.8.1.2.5.1.1.1 integer read-only
Indicates index for each profile.
                 swL2MulticastFilterProfileName 1.3.6.1.4.1.171.11.113.8.1.2.5.1.1.2 displaystring read-only
Specifies a profile name for each multicast filter profile.
                 swL2MulticastFilterStatus 1.3.6.1.4.1.171.11.113.8.1.2.5.1.1.3 rowstatus read-only
This object indicates the status of this entry.
         swL2MulticastFilterProfileAddressTable 1.3.6.1.4.1.171.11.113.8.1.2.5.2 no-access
A table that contains information about multicast filter address.
             swL2MulticastFilterProfileAddressEntry 1.3.6.1.4.1.171.11.113.8.1.2.5.2.1 no-access
A list of information for each multicast filter address.
                 swL2MulticastFilterProfileIdIndex 1.3.6.1.4.1.171.11.113.8.1.2.5.2.1.1 integer read-only
Indicates index for each profile.
                 swL2MulticastFilterFromIp 1.3.6.1.4.1.171.11.113.8.1.2.5.2.1.2 ipaddress read-only
Specifies the head IP address of a multicast address range which will be binded to a multicast filter profile.
                 swL2MulticastFilterToIp 1.3.6.1.4.1.171.11.113.8.1.2.5.2.1.3 ipaddress read-only
Specifies the tail IP address of a multicast address range which will be binded to a multicast filter profile.
                 swL2MulticastFilterAddressState 1.3.6.1.4.1.171.11.113.8.1.2.5.2.1.4 rowstatus read-only
This object indicates the status of this entry. Setting value to createAndGo (4) will add the multicast address list specified in swL2MulticastFilterFromIp and swL2MulticastFilterToIp to multicast filter profile. Setting value to destroy (6) will remove the multicast address list specified in swL2MulticastFilterFromIp and swL2MulticastFilterToIp from multicast filter profile.
         swL2LimitedMulticastFilterPortTable 1.3.6.1.4.1.171.11.113.8.1.2.5.3 no-access
A table that is used to bind the port to the profile ID.
             swL2LimitedMulticastFilterPortEntry 1.3.6.1.4.1.171.11.113.8.1.2.5.3.1 no-access
A list of information that is used to bind the port to the profile ID.
                 swL2LimitedMulticastFilterPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.5.3.1.1 integer read-only
Specifies the port as an index.
                 swL2LimitedMulticastFilterPortAccess 1.3.6.1.4.1.171.11.113.8.1.2.5.3.1.2 integer read-write
This object indicates the access status for each port. Enumeration: 'deny': 2, 'permit': 1.
                 swL2LimitedMulticastFilterPortProfileID 1.3.6.1.4.1.171.11.113.8.1.2.5.3.1.3 displaystring read-write
This object specifies a profile ID list for each port.
                 swL2LimitedMulticastFilterPortProfileStatus 1.3.6.1.4.1.171.11.113.8.1.2.5.3.1.4 integer read-only
Controls the multicast filter profile list which binds to each port. When set to add (2), the multicast filter profile ID list which is specified in swL2LimitedMulticastFilterPortProfileID will be bound to the port. When set to delete (3), the multicast filter profile ID list that is specified in swL2LimitedMulticastFilterPortProfileID will be unbound from the port. The attribute value reverts to 'other' once the action has been done. Enumeration: 'add': 2, 'other': 1, 'delete': 3.
         swL2MulticastFilterPortMaxGroupTable 1.3.6.1.4.1.171.11.113.8.1.2.5.4 no-access
A table that contains information about max group numbers based on each port.
             swL2MulticastFilterPortMaxGroupEntry 1.3.6.1.4.1.171.11.113.8.1.2.5.4.1 no-access
A list of max group number information for each port.
                 swL2MulticastFilterPortMaxGroupPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.5.4.1.1 integer read-only
Specifies the port number as a table index.
                 swL2MulticastFilterPortMaxGroup 1.3.6.1.4.1.171.11.113.8.1.2.5.4.1.2 integer read-write
Specifies maximum multicast filter group numbers for each port. The default value is 256.
         swL2LimitedMulticastFilterVIDTable 1.3.6.1.4.1.171.11.113.8.1.2.5.5 no-access
A table that is used to bind the VID to the profile ID.
             swL2LimitedMulticastFilterVIDEntry 1.3.6.1.4.1.171.11.113.8.1.2.5.5.1 no-access
A list of information that is used to bind the VID to the profile ID.
                 swL2LimitedMulticastFilterVIDIndex 1.3.6.1.4.1.171.11.113.8.1.2.5.5.1.1 integer read-only
Specifies the VID as an index.
                 swL2LimitedMulticastFilterVIDAccess 1.3.6.1.4.1.171.11.113.8.1.2.5.5.1.2 integer read-write
This object indicates the access status for each VID. Enumeration: 'deny': 2, 'permit': 1.
                 swL2LimitedMulticastFilterVIDProfileID 1.3.6.1.4.1.171.11.113.8.1.2.5.5.1.3 displaystring read-write
This object specifies a profile ID list for each VID.
                 swL2LimitedMulticastFilterVIDProfileStatus 1.3.6.1.4.1.171.11.113.8.1.2.5.5.1.4 integer read-only
Controls the multicast filter profile list which binds to each VID. When set to add (2), the multicast filter profile ID list which is specified in swL2LimitedMulticastFilterVIDProfileID will be bound to the VID. When set to delete (3), the multicast filter profile ID list that is specified in swL2LimitedMulticastFilterVIDProfileID will be unbound from the VID. The attribute value reverts to 'other' once the action has been done. Enumeration: 'add': 2, 'other': 1, 'delete': 3.
         swL2MulticastFilterVIDMaxGroupTable 1.3.6.1.4.1.171.11.113.8.1.2.5.6 no-access
A table that contains information about max group numbers based on VID.
             swL2MulticastFilterVIDMaxGroupEntry 1.3.6.1.4.1.171.11.113.8.1.2.5.6.1 no-access
A list of max group number information for each VID.
                 swL2MulticastFilterVIDMaxGroupVIDIndex 1.3.6.1.4.1.171.11.113.8.1.2.5.6.1.1 integer read-only
Specifies the VID number as a table index.
                 swL2MulticastFilterVIDMaxGroup 1.3.6.1.4.1.171.11.113.8.1.2.5.6.1.2 integer read-write
Specifies maximum multicast filter group numbers for each VID. The default value is 256.
     swL2QOSMgmt 1.3.6.1.4.1.171.11.113.8.1.2.6
         swL2QOSBandwidthControlTable 1.3.6.1.4.1.171.11.113.8.1.2.6.1 no-access
.
             swL2QOSBandwidthControlEntry 1.3.6.1.4.1.171.11.113.8.1.2.6.1.1 no-access
A list of information contained in the swL2QOSBandwidthControlTable.
                 swL2QOSBandwidthPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.6.1.1.1 integer read-only
Indicates the port.
                 swL2QOSBandwidthRxRate 1.3.6.1.4.1.171.11.113.8.1.2.6.1.1.2 integer read-write
Indicates RX Rate (Mbit/sec) of the specified port. A value of 10000 means no limit.
                 swL2QOSBandwidthTxRate 1.3.6.1.4.1.171.11.113.8.1.2.6.1.1.3 integer read-write
Indicates TX Rate(Mbit/sec) of the specified port. A value of 10000 means no limit.
                 swL2QOSBandwidthRadiusRxRate 1.3.6.1.4.1.171.11.113.8.1.2.6.1.1.4 integer read-only
The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.
                 swL2QOSBandwidthRadiusTxRate 1.3.6.1.4.1.171.11.113.8.1.2.6.1.1.5 integer read-only
The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.
         swL2QOSSchedulingTable 1.3.6.1.4.1.171.11.113.8.1.2.6.2 no-access
.
             swL2QOSSchedulingEntry 1.3.6.1.4.1.171.11.113.8.1.2.6.2.1 no-access
A list of information contained in the swL2QOSSchedulingTable.
                 swL2QOSSchedulingClassIndex 1.3.6.1.4.1.171.11.113.8.1.2.6.2.1.1 integer read-only
Indicates the hardware queue number.
                 swL2QOSSchedulingMaxPkts 1.3.6.1.4.1.171.11.113.8.1.2.6.2.1.2 integer read-write
Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 15 can be specified.
                 swL2QOSSchedulingMechanism 1.3.6.1.4.1.171.11.113.8.1.2.6.2.1.3 integer read-only
Indicates the mechanism of QoS scheduling. Enumeration: 'weightfair': 3, 'strict': 1, 'roundrobin': 2.
                 swL2QOSSchedulingMaxLatency 1.3.6.1.4.1.171.11.113.8.1.2.6.2.1.4 integer read-write
Indicates the maximum amount of time the hardware priority queue will be allowed to transmit packets before allowing the next lowest priority queue to begin transmitting its packets. A value between 0 and 255 can be specified- with this value multiplied by 16 ms to arrive at the total allowed time for the queue to transmit packets. For example, a value of 3 specifies 3*16=48 ms. The queue will continue transmitting the last packet until it finishes when the max_latency timer expires.
         swL2QOS8021pUserPriorityTable 1.3.6.1.4.1.171.11.113.8.1.2.6.3 no-access
.
             swL2QOS8021pUserPriorityEntry 1.3.6.1.4.1.171.11.113.8.1.2.6.3.1 no-access
A list of information contained in the swL2QOS8021pUserPriorityTable.
                 swL2QOS8021pUserPriorityIndex 1.3.6.1.4.1.171.11.113.8.1.2.6.3.1.1 integer read-only
The 802.1p user priority.
                 swL2QOS8021pUserPriorityClass 1.3.6.1.4.1.171.11.113.8.1.2.6.3.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has seven hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority).
         swL2QOS8021pDefaultPriorityTable 1.3.6.1.4.1.171.11.113.8.1.2.6.4 no-access
.
             swL2QOS8021pDefaultPriorityEntry 1.3.6.1.4.1.171.11.113.8.1.2.6.4.1 no-access
A list of information contained in the swL2QOS8021pDefaultPriorityTable.
                 swL2QOS8021pDefaultPriorityIndex 1.3.6.1.4.1.171.11.113.8.1.2.6.4.1.1 integer read-only
Indicates the port number.
                 swL2QOS8021pDefaultPriority 1.3.6.1.4.1.171.11.113.8.1.2.6.4.1.2 integer read-write
The priority value assigned to untagged packets received by the ports on the switch.
                 swL2QOS8021pRadiusPriority 1.3.6.1.4.1.171.11.113.8.1.2.6.4.1.3 integer read-only
Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
         swL2QOSSchedulingMechanismCtrl 1.3.6.1.4.1.171.11.113.8.1.2.6.5 integer read-write
This object controls the QoS scheduling mechanism. Enumeration: 'weightfair': 3, 'strict': 1, 'roundrobin': 2.
         swL2QOSHolPreventionCtrl 1.3.6.1.4.1.171.11.113.8.1.2.6.6 integer read-write
Controls QoS HoL Prevention Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2PortSecurityMgmt 1.3.6.1.4.1.171.11.113.8.1.2.7
         swL2PortSecurityControlTable 1.3.6.1.4.1.171.11.113.8.1.2.7.1 no-access
A port security feature which controls the address learning capability and traffic forwarding decisions. Each port can be enabled or disabled for this function. When it is enabled and a number is given, e.g N this will allow N addresses to be learned on this port, the first N address learned will be locked at this port as static entries. When the learned addresses number reaches N, any incoming packet without learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned on this port.
             swL2PortSecurityControlEntry 1.3.6.1.4.1.171.11.113.8.1.2.7.1.1 no-access
A list of information contained in the swL2PortSecurityControlTable.
                 swL2PortSecurityPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.7.1.1.1 integer read-only
Indicates the secured port to lock address learning.
                 swL2PortSecurityMaxLernAddr 1.3.6.1.4.1.171.11.113.8.1.2.7.1.1.2 integer read-write
Indicates allowable number of addresses that can be learned on this port.
                 swL2PortSecurityMode 1.3.6.1.4.1.171.11.113.8.1.2.7.1.1.3 integer read-write
Indicates the locking address mode. In deleteOnTimeout (3) mode - the locked addresses can be aged out after the aging timer expires. In this mode, when the locked address has aged out, the number of addresses that can be learned has to be increased by one. In deleteOnReset (4) mode - Locked addresses never age out unless the system restarts which will prevent port movement or intrusion. Enumeration: 'permanent': 2, 'other': 1, 'deleteOnTimeout': 3, 'deleteOnReset': 4.
                 swL2PortSecurityAdmState 1.3.6.1.4.1.171.11.113.8.1.2.7.1.1.4 integer read-write
Indicates the administration state of the locking address. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
                 swL2PortSecurityEntryClearCtrl 1.3.6.1.4.1.171.11.113.8.1.2.7.1.1.5 integer read-write
Used to clear port security entries by port. Setting this value to 'start' will execute the clear action, Once cleared, the value returns to 'other'. Enumeration: 'start': 2, 'other': 1.
         swL2PortSecurityDelCtrl 1.3.6.1.4.1.171.11.113.8.1.2.7.2
             swL2PortSecurityDelVlanName 1.3.6.1.4.1.171.11.113.8.1.2.7.2.1 displaystring read-write
Indicates VLAN name.
             swL2PortSecurityDelPort 1.3.6.1.4.1.171.11.113.8.1.2.7.2.2 integer read-write
Indicates the port.
             swL2PortSecurityDelMacAddress 1.3.6.1.4.1.171.11.113.8.1.2.7.2.3 macaddress read-write
Specifies a MAC address.
             swL2PortSecurityDelActivity 1.3.6.1.4.1.171.11.113.8.1.2.7.2.4 integer read-write
. Enumeration: 'start': 2, 'none': 1.
         swL2PortSecurityTrapLogState 1.3.6.1.4.1.171.11.113.8.1.2.7.3 integer read-write
When enabled (2), whenever there's a new MAC address that violates the pre-defined port security configuration, traps will be sent out and the relevant information will be logged into the system. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
     swL2DhcpRelayMgmt 1.3.6.1.4.1.171.11.113.8.1.2.8
         swL2DhcpRelayState 1.3.6.1.4.1.171.11.113.8.1.2.8.1 integer read-write
This object indicates if the DHCP relay function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swL2DhcpRelayHopCount 1.3.6.1.4.1.171.11.113.8.1.2.8.2 integer read-write
This object indicates the maximum number of router hops that DHCP packets can cross.
         swL2DhcpRelayTimeThreshold 1.3.6.1.4.1.171.11.113.8.1.2.8.3 integer read-write
This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP packet.
         swL2DhcpRelayOption82State 1.3.6.1.4.1.171.11.113.8.1.2.8.4 integer read-write
This object indicates if the DHCP relay agent information option 82 function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swL2DhcpRelayOption82Check 1.3.6.1.4.1.171.11.113.8.1.2.8.5 integer read-write
This object indicates if the checking mechanism of DHCP relay agent information option 82 is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swL2DhcpRelayOption82Policy 1.3.6.1.4.1.171.11.113.8.1.2.8.6 integer read-write
This object indicates the reforwarding policy of the DHCP relay agent information option 82. replace (1) - replace the exiting option 82 field in messages. drop (2) - discard messages with an existing option 82 field. keep (3) - retain the existing option 82 field messages. Enumeration: 'keep': 3, 'drop': 2, 'replace': 1.
         swL2DhcpRelayCtrlTable 1.3.6.1.4.1.171.11.113.8.1.2.8.7 no-access
This table specifies the IP address as a destination to forward (relay) DHCP packets to.
             swL2DhcpRelayCtrlEntry 1.3.6.1.4.1.171.11.113.8.1.2.8.7.1 no-access
A list of information that specifies the IP address as a destination to forward (relay) DHCP packets to.
                 swL2DhcpRelayCtrlInterfaceName 1.3.6.1.4.1.171.11.113.8.1.2.8.7.1.1 displaystring read-only
The name of the IP interface.
                 swL2DhcpRelayCtrlServer 1.3.6.1.4.1.171.11.113.8.1.2.8.7.1.2 ipaddress read-only
The DHCP server IP address.
                 swL2DhcpRelayCtrlState 1.3.6.1.4.1.171.11.113.8.1.2.8.7.1.3 integer read-write
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) - Writing this value to the object will remove the corresponding entry from the table. valid (3) - This entry resides in the table. Enumeration: 'other': 1, 'valid': 3, 'invalid': 2.
     swL2TrunkMgmt 1.3.6.1.4.1.171.11.113.8.1.2.9
         swL2TrunkMaxSupportedEntries 1.3.6.1.4.1.171.11.113.8.1.2.9.1 integer read-only
Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable).
         swL2TrunkCurrentNumEntries 1.3.6.1.4.1.171.11.113.8.1.2.9.2 integer read-only
Current active number of entries in the trunk configuration table.
         swL2TrunkCtrlTable 1.3.6.1.4.1.171.11.113.8.1.2.9.3 no-access
This table specifies information about the logical port trunk groups.
             swL2TrunkCtrlEntry 1.3.6.1.4.1.171.11.113.8.1.2.9.3.1 no-access
A list of information about each logical port trunk group.
                 swL2TrunkIndex 1.3.6.1.4.1.171.11.113.8.1.2.9.3.1.1 integer read-only
The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module.
                 swL2TrunkName 1.3.6.1.4.1.171.11.113.8.1.2.9.3.1.2 displaystring read-only
The name of the logical port trunk group.
                 swL2TrunkMasterPort 1.3.6.1.4.1.171.11.113.8.1.2.9.3.1.3 integer read-only
This object indicates the master port number of the port trunk entry. When using Port Trunking, you cannot configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
                 swL2TrunkMember 1.3.6.1.4.1.171.11.113.8.1.2.9.3.1.4 portlist read-only
Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for one trunk group.
                 swL2TrunkFloodingPort 1.3.6.1.4.1.171.11.113.8.1.2.9.3.1.5 integer read-only
The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port.
                 swL2TrunkType 1.3.6.1.4.1.171.11.113.8.1.2.9.3.1.6 integer read-only
This object indicates the type of trunk group. static: is a static trunk group lacp: is a LACP trunk group. Enumeration: 'lacp': 3, 'other': 1, 'static': 2.
                 swL2TrunkState 1.3.6.1.4.1.171.11.113.8.1.2.9.3.1.7 rowstatus read-only
This object indicates the status of this entry.
         swL2TrunkAlgorithm 1.3.6.1.4.1.171.11.113.8.1.2.9.4 integer read-write
This object configures part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. Enumeration: 'ip-source': 5, 'mac-destination': 3, 'mac-source': 2, 'l4-source-dest-port': 10, 'mac-source-dest': 4, 'ip-source-dest': 7, 'ip-destination': 6, 'other': 1, 'l4-source-port': 8, 'l4-destination-port': 9.
         swL2TrunkLACPPortTable 1.3.6.1.4.1.171.11.113.8.1.2.9.5 no-access
This table specifies which ports are grouped together (this can be up to 8 ports) into a single logical link.
             swL2TrunkLACPPortEntry 1.3.6.1.4.1.171.11.113.8.1.2.9.5.1 no-access
A list of information specifying which ports are grouped together (this can be up to 8 ports) into a single logical link.
                 swL2TrunkLACPPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.9.5.1.1 integer read-only
The index of logical port LACP.
                 swL2TrunkLACPPortState 1.3.6.1.4.1.171.11.113.8.1.2.9.5.1.2 integer read-write
The state of a logical port LACP. Enumeration: 'active': 1, 'passive': 2.
         swL2TrunkVLANTable 1.3.6.1.4.1.171.11.113.8.1.2.9.6 no-access
This table is used to manage the VLAN trunking feature of the device.
             swL2TrunkVLANEntry 1.3.6.1.4.1.171.11.113.8.1.2.9.6.1 no-access
This object is used to configure the VLAN trunking settings for each port.
                 swL2TrunkVLANPort 1.3.6.1.4.1.171.11.113.8.1.2.9.6.1.1 integer read-only
This object indicates the port being configured.
                 swL2TrunkVLANState 1.3.6.1.4.1.171.11.113.8.1.2.9.6.1.2 integer read-write
The state of the logical port LACP. Enumeration: 'disabled': 2, 'enabled': 1.
     swL2MirrorMgmt 1.3.6.1.4.1.171.11.113.8.1.2.10
           swL2MirrorLogicTargetPort 1.3.6.1.4.1.171.11.113.8.1.2.10.1 integer read-write
This object indicates which switch port will sniff another port. A trunk port member cannot be configured as a target snooping port. The port number is the sequential (logical) number, which is also applied to the bridge MIB, etc.
           swL2MirrorPortSourceIngress 1.3.6.1.4.1.171.11.113.8.1.2.10.2 portlist read-write
This represents the port where ingress packets will be sniffed.
           swL2MirrorPortSourceEgress 1.3.6.1.4.1.171.11.113.8.1.2.10.3 portlist read-write
This represents the port where egress packets will be sniffed.
           swL2MirrorPortState 1.3.6.1.4.1.171.11.113.8.1.2.10.4 integer read-write
This object indicates the port mirroring state. other (1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled (2) - After writing this value to the object, the corresponding entry will be removed from the table. enabled (3) - This entry resides in the table. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2MirrorGroupTable 1.3.6.1.4.1.171.11.113.8.1.2.10.5 no-access
This table specifies information about the mirror group configuration.
               swL2MirrorGroupEntry 1.3.6.1.4.1.171.11.113.8.1.2.10.5.1 no-access
A list of information about each mirror group configuration.
                   swL2MirrorGroupID 1.3.6.1.4.1.171.11.113.8.1.2.10.5.1.1 integer no-access
This object indicates the mirror group. The range of this object is (1..N), the value of N is project dependent.
                   swL2MirrorGroupRowStatus 1.3.6.1.4.1.171.11.113.8.1.2.10.5.1.2 rowstatus read-only
This object indicates the status of this entry.
                   swL2MirrorGroupState 1.3.6.1.4.1.171.11.113.8.1.2.10.5.1.3 integer read-only
This object indicates the mirror group state. Enumeration: 'disabled': 2, 'enabled': 1.
                   swL2MirrorGroupTargetPort 1.3.6.1.4.1.171.11.113.8.1.2.10.5.1.4 integer read-only
This object indicates the mirror group target port.
                   swL2MirrorGroupSourceIngress 1.3.6.1.4.1.171.11.113.8.1.2.10.5.1.5 portlist read-only
This object indicates the mirror group ingress source ports.
                   swL2MirrorGroupSourceEngress 1.3.6.1.4.1.171.11.113.8.1.2.10.5.1.6 portlist read-only
This object indicates the mirror group engress source ports.
     swL2IGMPMgmt 1.3.6.1.4.1.171.11.113.8.1.2.11
           swL2IGMPMaxSupportedVlans 1.3.6.1.4.1.171.11.113.8.1.2.11.1 integer read-only
Maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable).
           swL2IGMPMaxIpGroupNumPerVlan 1.3.6.1.4.1.171.11.113.8.1.2.11.2 integer read-only
Maximum number of multicast IP groups per VLAN in the layer 2 IGMP information table.
           swL2IGMPSnoopingMulticastVlanState 1.3.6.1.4.1.171.11.113.8.1.2.11.3 integer read-write
It indicates the global state of igmp_snoop multicast_vlan. Enumeration: 'disabled': 2, 'enabled': 1.
           swL2IGMPCtrlTable 1.3.6.1.4.1.171.11.113.8.1.2.11.4 no-access
The table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled, there is only one entry in the table, with an index of 1. If the VLAN is in Port-Base or 802.1q mode, the maximum number of entries can be 12, with an index range from 1 to 12.
               swL2IGMPCtrlEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1 no-access
The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled.
                   swL2IGMPCtrlVid 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.1 integer read-only
This object indicates the IGMP control entry's VLAN ID. If the VLAN is disabled, the VID is always 0 and cannot be changed by management users. If the VLAN is in Port-Based mode, the VID is arranged from 1 to 12, in a fixed form. If the VLAN is in 802.1q mode, the VID setting can be changed to a number from 1 to 4094 by the management user, and the VID in each entry must be unique within the IGMP Control Table.
                   swL2IGMPQueryInterval 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.2 integer read-write
The frequency at which IGMP Host-Query packets are transmitted on this switch.
                   swL2IGMPMaxResponseTime 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.3 integer read-write
The maximum query response time on this switch.
                   swL2IGMPRobustness 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.4 integer read-write
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to have a high packet loss, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
                   swL2IGMPLastMemberQueryInterval 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.5 integer read-write
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
                   swL2IGMPHostTimeout 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.6 integer read-write
The timer value for sending IGMP query packets when none were sent by the host on the LAN. The timer works on a per-VLAN basis. Our device will be activated to send the query messages if the timer expires. Please reference RFC2236-1997.
                   swL2IGMPRouteTimeout 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.7 integer read-write
The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
                   swL2IGMPLeaveTimer 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.8 integer read-write
When a query receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.
                   swL2IGMPQueryState 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.9 integer read-write
This object decides if the IGMP query is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2IGMPCurrentState 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.10 integer read-only
This object indicates the current IGMP query state. Enumeration: 'non-querier': 3, 'other': 1, 'querier': 2.
                   swL2IGMPCtrlState 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.11 integer read-write
This object indicates the status of this entry. other (1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable (2) - IGMP function is disabled for this entry. enable (3) - IGMP function is enabled for this entry. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                   swL2IGMPFastLeaveState 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.12 integer read-write
This object indicates the fast_leave status of this entry. other (1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable (2) - IGMP fast-leave function is disabled for this entry. enable (3) - IGMP fast-leave function is enabled for this entry. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                   swL2IGMPQueryVersion 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.13 integer read-write
Configure the IGMP version of query packet which will be sent by the router.
                   swL2IGMPRateLimit 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.14 integer read-write
Config the rate of IGMP report or leave packet that the switch can process on a specific VLAN. The rate is specified in packet per second. The packet that exceeds the limited rate will be dropped. This setting is also applied to multicast VLAN. The default setting '0' is no_limit.
                   swL2IGMPReportSuppression 1.3.6.1.4.1.171.11.113.8.1.2.11.4.1.15 integer read-write
When enabled, multiple IGMP reports or leaves for a specific group (S,G) will be integrated into only one report before being sent to the router port. Enumeration: 'disabled': 2, 'enabled': 1.
           swL2IGMPQueryInfoTable 1.3.6.1.4.1.171.11.113.8.1.2.11.5 no-access
This table contains the current number of IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device.
               swL2IGMPQueryInfoEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.5.1 no-access
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN entries are all enabled.
                   swL2IGMPInfoVid 1.3.6.1.4.1.171.11.113.8.1.2.11.5.1.1 integer read-only
This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).
                   swL2IGMPInfoQueryCount 1.3.6.1.4.1.171.11.113.8.1.2.11.5.1.2 integer read-only
This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis.
                   swL2IGMPInfoTxQueryCount 1.3.6.1.4.1.171.11.113.8.1.2.11.5.1.3 integer read-only
This object indicates the send count of IGMP query messages, on a per-VLAN basis. In the case of an IGMP timer expiration, the switch will send IGMP query packets to all related VLAN member ports and increment this object by 1.
                   swL2IGMPQueryIPAddress 1.3.6.1.4.1.171.11.113.8.1.2.11.5.1.4 ipaddress read-only
This object identifies the Query IP addresses.
                   swL2IGMPQueryExpiryTime 1.3.6.1.4.1.171.11.113.8.1.2.11.5.1.5 integer read-only
This object indicates the Query Expiry Time.
           swL2IGMPInfoTable 1.3.6.1.4.1.171.11.113.8.1.2.11.6 no-access
The table containing current IGMP information which was captured by this device, provided that the swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of the associated VLAN entries are all enabled. Note that the priority of IGMP table entries is lower than the Filtering Table, i.e. if there is a table hash collision between entries in the IGMP Table and Filtering Table inside the switch's H/W address table, then the Filtering Table entry overwrites the colliding entry of the IGMP Table. Also see the swL2FilterMgmt description.
               swL2IGMPInfoEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.6.1 no-access
Information about current IGMP information which was captured by this device, provided that the swL2DevCtrlIGMPSnooping and the swL2IGMPCtrlState of associated VLAN entries are all enabled.
                   swL2IGMPVid 1.3.6.1.4.1.171.11.113.8.1.2.11.6.1.1 integer read-only
This object indicates the VID of individual IGMP table entries. It shows the VID IGMP report information captured on the network.
                   swL2IGMPGroupIpAddr 1.3.6.1.4.1.171.11.113.8.1.2.11.6.1.2 ipaddress read-only
This object identifies group IP addresses which were captured from IGMP packets, on a per-VLAN basis.
                   swL2IGMPMacAddr 1.3.6.1.4.1.171.11.113.8.1.2.11.6.1.3 macaddress read-only
This object identifies MAC addresses which correspond to the swL2IGMPGroupIpAddr, on a per-VLAN basis.
                   swL2IGMPPortMap 1.3.6.1.4.1.171.11.113.8.1.2.11.6.1.4 portlist read-only
This object indicates which ports belong to the same multicast group, on a per-VLAN basis. Each multicast group has an octet string which is indicated by a port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bits corresponding to the port from which a frame is received is irrelevant). The 4 octets represent one unit port according to its logical port. If the unit is less than 32 ports, other ports are not affected and are replaced with zeroes.
                   swL2IGMPIpGroupReportCount 1.3.6.1.4.1.171.11.113.8.1.2.11.6.1.5 integer read-only
This object indicates how many report packets were received by the device, that correspond with this entry when the IGMP function is enabled on a per-VLAN basis.
                   swL2IGMPVersion 1.3.6.1.4.1.171.11.113.8.1.2.11.6.1.6 integer read-only
This object identifies the version of IGMP from IGMP packets, on a per-VLAN basis.
                   swL2IGMPGroupMode 1.3.6.1.4.1.171.11.113.8.1.2.11.6.1.7 integer read-only
When the version of IGMP is v3, this object identifies whether the group is in INCLUDE or EXCLUDE mode. Enumeration: 'exclude': 2, 'include': 1.
           swL2IGMPRouterPortTable 1.3.6.1.4.1.171.11.113.8.1.2.11.7 no-access
The information of the router port table.
               swL2IGMPRouterPortEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.7.1 no-access
The entry of swL2IGMPRouterPortTable.
                   swL2IGMPRouterPortVlanid 1.3.6.1.4.1.171.11.113.8.1.2.11.7.1.1 integer read-only
This object indicates the VLAN ID of the router's port entry.
                   swL2IGMPRouterPortVlanName 1.3.6.1.4.1.171.11.113.8.1.2.11.7.1.2 displaystring read-only
This object indicates the VLAN name of the router's port entry.
                   swL2IGMPRouterPortStaticPortList 1.3.6.1.4.1.171.11.113.8.1.2.11.7.1.3 portlist read-write
This object indicates the static portlist of the router's port entry.
                   swL2IGMPRouterPortDynamicPortList 1.3.6.1.4.1.171.11.113.8.1.2.11.7.1.4 portlist read-only
This object indicates the dynamic portlist of the router's port entry.
                   swL2IGMPRouterPortForbiddenPortList 1.3.6.1.4.1.171.11.113.8.1.2.11.7.1.5 portlist read-write
This object indicates the forbidden portlist of the router's port entry.
           swL2IGMPMulticastVlanTable 1.3.6.1.4.1.171.11.113.8.1.2.11.8 no-access
Information about the IGMP snooping multicast VLAN table.
               swL2IGMPMulticastVlanEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1 no-access
The entry of swL2IGMPMulticastVlanTable.
                   swL2IGMPMulticastVlanid 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1.1 integer read-only
This object indicates the VLAN ID of the IGMP snooping multicast VLAN entry.
                   swL2IGMPMulticastVlanName 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1.2 displaystring read-only
This object indicates the VLAN name of the IGMP snooping multicast VLAN entry.
                   swL2IGMPMulticastVlanSourcePort 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1.3 portlist read-write
This object indicates the port list of the source ports of the IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from the member ports will be forwarded to the source ports.
                   swL2IGMPMulticastVlanMemberPort 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1.4 portlist read-write
This object indicates the port list of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry and the IGMP control messages received from the member ports will be forwarded to the source ports.
                   swL2IGMPMulticastVlanTagMemberPort 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1.5 portlist read-write
This object indicates the port list of the tag member ports of the IGMP snooping multicast VLAN.
                   swL2IGMPMulticastVlanState 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1.6 integer read-write
This object can be used to enable or disable the IGMP snooping multicast VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                   swL2IGMPMulticastVlanReplaceSourceIp 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1.7 ipaddress read-write
The replacement source IP of this multicast VLAN.
                   swL2IGMPMulticastVlanRowStatus 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1.8 rowstatus read-only
This object indicates the status of this entry.
                   swL2IGMPMulticastVlanRemoveAllMcastAddrListAction 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1.9 integer read-write
This object indicates whether to remove all the multicast address lists from the IGMP multicast VLAN or not. Enumeration: 'start': 2, 'other': 1.
                   swL2IGMPMulticastVlanUntagSourcePort 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1.10 portlist read-write
This object indicates the untagged member ports to add to the multicast VLAN.
                   swL2IGMPMulticastVlanRemapPriority 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1.11 integer read-only
The priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. When set to 8, the packet's original priority will be used.
                   swL2IGMPMulticastVlanReplacePriority 1.3.6.1.4.1.171.11.113.8.1.2.11.8.1.12 integer read-only
Specifies that a packet's priority will be changed by the switch based on the remap priority. This flag will only take effect when remap priority is set. Enumeration: 'false': 2, 'true': 1.
           swL2IGMPMulticastVlanGroupTable 1.3.6.1.4.1.171.11.113.8.1.2.11.9 no-access
The table containing the IGMP snooping multicast VLAN group information
               swL2IGMPMulticastVlanGroupEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.9.1 no-access
Information about the current IGMP snooping multicast VLAN group.
                   swL2IGMPMulticastVlanGroupVid 1.3.6.1.4.1.171.11.113.8.1.2.11.9.1.1 integer read-only
This object indicates the VID of the IGMP snooping multicast VLAN group.
                   swL2IGMPMulticastVlanGroupFromIp 1.3.6.1.4.1.171.11.113.8.1.2.11.9.1.2 ipaddress read-only
Specifies the multicast address list for this VLAN.
                   swL2IGMPMulticastVlanGroupToIp 1.3.6.1.4.1.171.11.113.8.1.2.11.9.1.3 ipaddress read-only
Specifies the multicast address list for this VLAN.
                   swL2IGMPMulticastVlanGroupStatus 1.3.6.1.4.1.171.11.113.8.1.2.11.9.1.4 rowstatus read-only
This object indicates the status of this entry.
           swL2IGMPv3Table 1.3.6.1.4.1.171.11.113.8.1.2.11.10 no-access
This table contains the IGMP snooping V3 information.
                 swL2IGMPv3Entry 1.3.6.1.4.1.171.11.113.8.1.2.11.10.1 no-access
Information about the current IGMP snooping V3.
                     swL2IGMPv3SourceIPAddr 1.3.6.1.4.1.171.11.113.8.1.2.11.10.1.1 ipaddress read-only
This object identifies the source IP addresses from the group where they were captured from. IGMP packets, on a per-VLAN basis.
                     swL2IGMPv3Forwarding 1.3.6.1.4.1.171.11.113.8.1.2.11.10.1.2 integer read-only
This object identifies if the packets from the source IP addresses are forwarding or not. Enumeration: 'disabled': 2, 'enabled': 1.
                     swL2IGMPv3ExpireTimer 1.3.6.1.4.1.171.11.113.8.1.2.11.10.1.3 integer read-only
This object identifies the leaving times of the source time.
           swIGMPSnoopingGroupTable 1.3.6.1.4.1.171.11.113.8.1.2.11.11 no-access
The table contains the current IGMP snooping group information captured by the device.
                 swIGMPSnoopingGroupEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.11.1 no-access
Information about the current IGMP snooping group information which has been captured by the device.
                     swIGMPSnoopingGroupVid 1.3.6.1.4.1.171.11.113.8.1.2.11.11.1.1 integer read-only
This object indicates the VID of the individual IGMP snooping group table entry.
                     swIGMPSnoopingGroupGroupAddr 1.3.6.1.4.1.171.11.113.8.1.2.11.11.1.2 ipaddress read-only
This object identifies the group IP address which has been captured from the IGMP packet, on a per-VLAN basis.
                     swIGMPSnoopingGroupSourceAddr 1.3.6.1.4.1.171.11.113.8.1.2.11.11.1.3 ipaddress read-only
This object identifies the source addresses.
                     swIGMPSnoopingGroupIncludePortMap 1.3.6.1.4.1.171.11.113.8.1.2.11.11.1.4 portlist read-only
This object indicates the port list under INCLUDE mode.
                     swIGMPSnoopingGroupExcludePortMap 1.3.6.1.4.1.171.11.113.8.1.2.11.11.1.5 portlist read-only
This object indicates the port list under EXCLUDE mode.
                     swIGMPSnoopingGroupReportCount 1.3.6.1.4.1.171.11.113.8.1.2.11.11.1.6 integer read-only
This object indicates how many report packets were received by our device corresponding with this entry that has the IGMP function enabled, on a per-group basis.
                     swIGMPSnoopingGroupUpTime 1.3.6.1.4.1.171.11.113.8.1.2.11.11.1.7 timeticks read-only
This object indicates how long since the group was detected.
                     swIGMPSnoopingGroupExpiryTime 1.3.6.1.4.1.171.11.113.8.1.2.11.11.1.8 timeticks read-only
This object indicates the time left before this group will be aged out.
                     swIGMPSnoopingGroupRouterPorts 1.3.6.1.4.1.171.11.113.8.1.2.11.11.1.9 portlist read-only
This object indicates the port number of the router ports.
                     swIGMPSnoopingGroupStaticMemberPorts 1.3.6.1.4.1.171.11.113.8.1.2.11.11.1.10 portlist read-only
This object indicates the port number of the static member ports. This object is only supported by IGMPv2.
           swL2IGMPDynIpMultMgmt 1.3.6.1.4.1.171.11.113.8.1.2.11.12
                 swL2IGMPDynIPMultMaxEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.12.1 integer read-write
This object specifies the maximum number of entries which can be learned by dynamic IP multicast
                 swL2IGMPSnoopingClearDynIpMult 1.3.6.1.4.1.171.11.113.8.1.2.11.12.2
                     swL2IGMPSnoopingClearDynIpMultVID 1.3.6.1.4.1.171.11.113.8.1.2.11.12.2.1 vlanid read-write
This object indicates the VLAN identifier where the data driven entries will be removed from.
                     swL2IGMPSnoopingClearDynIpMultIP 1.3.6.1.4.1.171.11.113.8.1.2.11.12.2.2 ipaddress read-write
This object indicates the IP address of the IGMP snooping group from which the data driven entries will be removed.
                     swL2IGMPSnoopingClearDynIpMultAction 1.3.6.1.4.1.171.11.113.8.1.2.11.12.2.3 integer read-write
Setting this object will clear the data driven entries. all - remove all learned data driven groups vlan - clear all data driven entries in the VLAN specified in swIGMPSnoopingClearDynIpMultVID. group - clear the group with address specified in swL2IGMPSnoopingClearDynIpMultIP in the VLAN specified in swIGMPSnoopingClearDynIpMultVID. Enumeration: 'all': 1, 'vlan': 2, 'group': 3, 'other': 4.
                 swL2IGMPDynIPMultCtrlTable 1.3.6.1.4.1.171.11.113.8.1.2.11.12.3 no-access
This table is used to manage the IGMP dynamic IP multicast.
                     swL2IGMPDynIPMultCtrlEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.12.3.1 no-access
A list of manageable entities for IGMP dynamic IP multicast.
                         swL2IGMPDynIPMultVlanState 1.3.6.1.4.1.171.11.113.8.1.2.11.12.3.1.1 integer read-write
This object is used to disable or enable the dynamic IP multicast feature in this VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                         swL2IGMPDynIPMultVlanAge 1.3.6.1.4.1.171.11.113.8.1.2.11.12.3.1.2 integer read-write
This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                         swL2IGMPDynIPMultGroupExpiryTime 1.3.6.1.4.1.171.11.113.8.1.2.11.12.3.1.3 integer read-write
This object indicates the dynamic IP multicast Group Expiry Time.
           swL2IGMPAccessAuthTable 1.3.6.1.4.1.171.11.113.8.1.2.11.13 no-access
This table is used to manage the IGMP Access Authentication configurations of the device.
                 swL2IGMPAccessAuthEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.13.1 no-access
A list of manageable entities for IGMP Access Authentication. The configuration is done per port.
                     swL2IGMPAccessAuthPort 1.3.6.1.4.1.171.11.113.8.1.2.11.13.1.1 integer read-only
The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured.
                     swL2IGMPAccessAuthState 1.3.6.1.4.1.171.11.113.8.1.2.11.13.1.2 integer read-write
This object denotes the status of IGMP Access Authentication of the port. Enumeration: 'disabled': 2, 'enabled': 1.
           swL2IGMPCountrInfoMgmt 1.3.6.1.4.1.171.11.113.8.1.2.11.14
                 swL2IGMPSnoopingClearStatisticsCounter 1.3.6.1.4.1.171.11.113.8.1.2.11.14.1 integer read-write
This object is used to clear the IGMP snooping statistics counter. Enumeration: 'start': 2, 'other': 1.
                 swL2IGMPVlanCounterInfoTable 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2 no-access
This table contains the current number of IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device, based on VLAN.
                     swL2IGMPVlanCounterInfoEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1 no-access
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN entries are all enabled.
                         swL2IGMPVlanCounterInfoVid 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.1 integer read-only
This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of the IGMP control table (swL2IGMPCtrlTable).
                         swL2IGMPVlanCounterGroupNumber 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.2 integer read-only
The group number on a per VLAN basis.
                         swL2IGMPVlanQueryCountV1 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.3 counter read-only
This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv1.
                         swL2IGMPVlanQueryCountV2 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.4 counter read-only
This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2.
                         swL2IGMPVlanQueryCountV3 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.5 counter read-only
This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv3.
                         swL2IGMPVlanDropQueryCount 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.6 counter read-only
This object indicates the number of query packets dropped since the IGMP function was enabled, on a per-VLAN basis.
                         swL2IGMPVlanReportCountV1 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.7 counter read-only
This object indicates the number of report packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv1.
                         swL2IGMPVlanReportCountV2 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.8 counter read-only
This object indicates the number of report packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2.
                         swL2IGMPVlanReportCountV3 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.9 counter read-only
This object indicates the number of report packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv3.
                         swL2IGMPVlanLeaveCountV2 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.10 counter read-only
This object indicates the number of leave packets received since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2.
                         swL2IGMPVlanDropedReportAndLeaveCount 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.11 counter read-only
This object indicates the number of report and leave packets dropped since the IGMP function was enabled, on a per-VLAN basis.
                         swL2IGMPVlanDroppedByMaxGroupLimitation 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.12 counter read-only
This object indicates the number of packets received dropped by max group limitation since the IGMP function was enabled, on a per-VLAN basis.
                         swL2IGMPVlanDroppedByGroupFilter 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.13 counter read-only
This object indicates the number of packets received dropped by group filter since the IGMP function was enabled, on a per-VLAN basis.
                         swL2IGMPVlanTxQueryCountV1 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.14 counter read-only
This object indicates the send count of IGMP query messages, on a per-VLAN basis, for IGMPv1.
                         swL2IGMPVlanTxQueryCountV2 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.15 counter read-only
This object indicates the send count of IGMP query messages, on a per-VLAN basis, for IGMPv2.
                         swL2IGMPVlanTxQueryCountV3 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.16 counter read-only
This object indicates the send count of IGMP query messages, on a per-VLAN basis, for IGMPv3.
                         swL2IGMPVlanTxReportCountV1 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.17 counter read-only
This object indicates the send count of IGMP report messages, on a per-VLAN basis, for IGMPv1.
                         swL2IGMPVlanTxReportCountV2 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.18 counter read-only
This object indicates the send count of IGMP report messages, on a per-VLAN basis, for IGMPv2.
                         swL2IGMPVlanTxReportCountV3 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.19 counter read-only
This object indicates the send count of IGMP report messages, on a per-VLAN basis, for IGMPv3.
                         swL2IGMPVlanTxLeaveCountV2 1.3.6.1.4.1.171.11.113.8.1.2.11.14.2.1.20 counter read-only
This object indicates the send count of IGMP leave messages, on a per-VLAN basis, for IGMPv2.
                 swL2IGMPPortCounterInfoTable 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3 no-access
This table contains the current number of IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device, based on port.
                     swL2IGMPPortCounterInfoEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1 no-access
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN entries are all enabled.
                         swL2IGMPPortCounterInfoIndex 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.1 integer read-only
This object indicates the port number of the associated IGMP Counter info table entry.
                         swL2IGMPPortCounterGroupNumber 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.2 integer read-only
Group number per port.
                         swL2IGMPPortQueryCountV1 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.3 counter read-only
This object indicates the number of query packets received since the IGMP function was enabled, on a per-port basis, for IGMPv1.
                         swL2IGMPPortQueryCountV2 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.4 counter read-only
This object indicates the number of query packets received since the IGMP function was enabled, on a per-port basis, for IGMPv2.
                         swL2IGMPPortQueryCountV3 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.5 counter read-only
This object indicates the number of query packets received since the IGMP function was enabled, on a per-port basis, for IGMPv3.
                         swL2IGMPPortDropQueryCount 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.6 counter read-only
This object indicates the number of query packets dropped since the IGMP function was enabled, on a per-port basis.
                         swL2IGMPPortReportCountV1 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.7 counter read-only
This object indicates the number of report packets received since the IGMP function was enabled, on a per-port basis, for IGMPv1.
                         swL2IGMPPortReportCountV2 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.8 counter read-only
This object indicates the number of report packets received since the IGMP function was enabled, on a per-port basis, for IGMPv2.
                         swL2IGMPPortReportCountV3 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.9 counter read-only
This object indicates the number of report packets received since the IGMP function was enabled, on a per-port basis, for IGMPv3.
                         swL2IGMPPortLeaveCountV2 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.10 counter read-only
This object indicates the number of leave packets received since the IGMP function was enabled, on a per-port basis, for IGMPv2.
                         swL2IGMPPortDropedReportAndLeaveCount 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.11 counter read-only
This object indicates the number of report and leave packets dropped since the IGMP function was enabled, on a per-port basis.
                         swL2IGMPPortDroppedByMaxGroupLimitation 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.12 counter read-only
This object indicates the number of packets received dropped by max group limitation since the IGMP function was enabled, on a per-port basis.
                         swL2IGMPPortDroppedByGroupFilter 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.13 counter read-only
This object indicates the number of packets received dropped by group filter since the IGMP function was enabled, on a per-port basis.
                         swL2IGMPPortTxQueryCountV1 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.14 counter read-only
This object indicates the send count of IGMP query messages, on a per-port basis, for IGMPv1.
                         swL2IGMPPortTxQueryCountV2 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.15 counter read-only
This object indicates the send count of IGMP query messages, on a per-port basis, for IGMPv2.
                         swL2IGMPPortTxQueryCountV3 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.16 counter read-only
This object indicates the send count of IGMP query messages, on a per-port basis, for IGMPv3.
                         swL2IGMPPortTxReportCountV1 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.17 counter read-only
This object indicates the send count of IGMP report messages, on a per-port basis, for IGMPv1.
                         swL2IGMPPortTxReportCountV2 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.18 counter read-only
This object indicates the send count of IGMP report messages, on a per-port basis, for IGMPv2.
                         swL2IGMPPortTxReportCountV3 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.19 counter read-only
This object indicates the send count of IGMP report messages, on a per-port basis, for IGMPv3.
                         swL2IGMPPortTxLeaveCountV2 1.3.6.1.4.1.171.11.113.8.1.2.11.14.3.1.20 counter read-only
This object indicates the send count of IGMP leave messages, on a per-port basis, for IGMPv2.
           swL2IGMPRouterIPAddressTable 1.3.6.1.4.1.171.11.113.8.1.2.11.15 no-access
This table indicates the router IP address of the associated IGMP Router Port Table (swL2IGMPRouterPortTable).
                 swL2IGMPRouterIPAddressEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.15.1 no-access
Information about current router IP address in the IGMP Router Port Table (swL2IGMPRouterPortTable).
                     swL2IGMPRouterIPAddressVid 1.3.6.1.4.1.171.11.113.8.1.2.11.15.1.1 integer read-only
This object indicates the VID of the associated IGMP Router Port Table (swL2IGMPRouterPortTable).
                     swL2IGMPRouterIPAddress 1.3.6.1.4.1.171.11.113.8.1.2.11.15.1.2 ipaddress read-only
This object indicates the Router IP address of the associated IGMP Router Port Table.
           swL2IGMPSnoopingStaticGroupTable 1.3.6.1.4.1.171.11.113.8.1.2.11.16 no-access
The table contains the current IGMP snooping static group information captured by the device.
                 swL2IGMPSnoopingStaticGroupEntry 1.3.6.1.4.1.171.11.113.8.1.2.11.16.1 no-access
Information about current IGMP snooping static group information captured by the device.
                     swL2IGMPSnoopingStaticGroupVID 1.3.6.1.4.1.171.11.113.8.1.2.11.16.1.1 integer read-only
This object indicates the VID of the current IGMP snooping static group.
                     swL2IGMPSnoopingStaticGroupIPaddress 1.3.6.1.4.1.171.11.113.8.1.2.11.16.1.2 ipaddress read-only
This object indicates the current IGMP snooping static group IP address.
                     swL2IGMPSnoopingStaticGroupMemberPortList 1.3.6.1.4.1.171.11.113.8.1.2.11.16.1.3 portlist read-write
This object indicates the current IGMP snooping static group Member Portlist.
                     swL2IGMPSnoopingStaticGroupRowStatus 1.3.6.1.4.1.171.11.113.8.1.2.11.16.1.4 rowstatus read-only
This object indicates the status of this entry.
     swL2TrafficMgmt 1.3.6.1.4.1.171.11.113.8.1.2.13
           swL2TrafficCtrlTable 1.3.6.1.4.1.171.11.113.8.1.2.13.1 no-access
This table specifies the storm traffic control configuration.
               swL2TrafficCtrlEntry 1.3.6.1.4.1.171.11.113.8.1.2.13.1.1 no-access
A list of information specific to the storm traffic control configuration.
                   swL2TrafficCtrlGroupIndex 1.3.6.1.4.1.171.11.113.8.1.2.13.1.1.1 integer read-only
The index of the logical port trunk. The trunk group number depends on the existence of a unit and module.
                   swL2TrafficCtrlUnitIndex 1.3.6.1.4.1.171.11.113.8.1.2.13.1.1.2 integer read-only
Indicates the ID of the unit in the device
                   swL2TrafficCtrlBMStromthreshold 1.3.6.1.4.1.171.11.113.8.1.2.13.1.1.3 integer read-write
This object decides how many thousand broadcast/multicast packets per second (depending on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlDlfStromCtrl objects being enabled) will activate the storm control function. Whenever a port reaches its configured amount of packets in the one second time interval, the device will start dropping that type of packet, until the time interval has expired. Once the time interval has expired, the device will restart forwarding that type of packet.
                   swL2TrafficCtrlBcastStromCtrl 1.3.6.1.4.1.171.11.113.8.1.2.13.1.1.4 integer read-write
This object indicates if the broadcast storm control function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2TrafficCtrlMcastStromCtrl 1.3.6.1.4.1.171.11.113.8.1.2.13.1.1.5 integer read-write
This object indicates if the multicast storm control function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2TrafficCtrlDlfStromCtrl 1.3.6.1.4.1.171.11.113.8.1.2.13.1.1.6 integer read-write
This object indicates if the destination lookup fail function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2TrafficSegMgmt 1.3.6.1.4.1.171.11.113.8.1.2.14
           swL2TrafficSegTable 1.3.6.1.4.1.171.11.113.8.1.2.14.1 no-access
This table specifies that the port can just forward traffic to the specific port list.
               swL2TrafficSegEntry 1.3.6.1.4.1.171.11.113.8.1.2.14.1.1 no-access
A list of information which specifies the port with its traffic forwarding list.
                   swL2TrafficSegPort 1.3.6.1.4.1.171.11.113.8.1.2.14.1.1.1 integer read-only
The port number of the logical port.
                   swL2TrafficSegForwardPorts 1.3.6.1.4.1.171.11.113.8.1.2.14.1.1.2 portlist read-write
The port list where a specific port can forward traffic.
     swL2StpMgmt 1.3.6.1.4.1.171.11.113.8.1.2.15
           swL2StpForwardBPDU 1.3.6.1.4.1.171.11.113.8.1.2.15.1 integer read-write
Indicates whether or not to flood BPDU packets when STP is disabled on the device. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2StpLbd 1.3.6.1.4.1.171.11.113.8.1.2.15.2 integer read-write
Indicates whether STP loopback prevention on the device is turned on. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2StpLbdRecoverTime 1.3.6.1.4.1.171.11.113.8.1.2.15.3 integer read-write
The time period set between the checking intervals of the BPDU loop. Configuring this time as 0 disables loopback checking.
           swL2StpPortTable 1.3.6.1.4.1.171.11.113.8.1.2.15.4 no-access
A table that contains port-specific information for the Spanning Tree Protocol.
               swL2StpPortEntry 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1 no-access
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
                   swL2StpPort 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.1 integer read-only
The port number of the port for this entry.
                   swL2StpPortLbd 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.2 integer read-write
Used to enable or disable the loopback function on the specified port. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2StpPortStatus 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.3 integer read-only
When the port is enabled, this defines the port's current state as defined by the Spanning Tree Protocol. If PortEnable is disabled, the port status will be no-stp-enabled (7). If the port is in error disabled status, the port status will be err-disabled. Enumeration: 'err-disabled': 8, 'no-stp-enabled': 7, 'discarding': 3, 'disabled': 2, 'broken': 6, 'other': 1, 'learning': 4, 'forwarding': 5.
                   swL2StpPortRole 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.4 integer read-only
When the port is enabled, this defines the port's current port role as defined by the Spanning Tree Protocol. If the PortEnable is disabled, the port status will be nonstp. If the port is in error loopback status, the port role will be loopback. Enumeration: 'loopback': 7, 'backup': 3, 'alternate': 2, 'designated': 5, 'disabled': 1, 'nonStp': 6, 'root': 4.
                   swL2StpPortFBPDU 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.5 integer read-write
The enable/disable status of the BPDU filtering mechanism as related to this port. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                   swL2StpPortLinkState 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.6 integer read-only
This object indicates the STP port speed and duplex mode. Enumeration: 'half-10Mbps-backp': 3, 'half-100Mbps-backp': 7, 'full-100Mbps-none': 8, 'full-1000Mbps-8023x': 13, 'full-100Mbps-8023x': 9, 'full-10Mbps-8023x': 5, 'full-1000Mbps-none': 12, 'half-100Mbps-none': 6, 'half-10Mbps-none': 2, 'half-1000Mbps-none': 10, 'full-10Mbps-none': 4, 'link-down': 1, 'full-1000Mbps-backp': 11.
                   swL2StpPortProtocolMigration 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.7 truthvalue read-write
When operating in RSTP (version 2) mode, writing TRUE (1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns a FALSE message when read.
                   swL2StpPortAdminEdgePort 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.8 truthvalue read-write
The administrative value of the Edge Port parameter. A value of TRUE (1) indicates that this port should be assumed as an edge-port and a value of FALSE (2) indicates that this port should be assumed as a non-edge-port.
                   swL2StpPortOperEdgePort 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.9 truthvalue read-only
The operational value of the Edge Port parameter. The object is initialized to the value of swL2StpPortAdminEdgePort and is set to FALSE on reception of a BPDU packet.
                   swL2StpPortAdminPointToPoint 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.10 integer read-write
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue (0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse (1) indicates that this port should be treated as having a shared media connection. A value of auto (2) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregated, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means. Enumeration: 'forceFalse': 1, 'forceTrue': 0, 'auto': 2.
                   swL2StpPortOperPointToPoint 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.11 truthvalue read-only
The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the swL2StpPortAdminPointToPoint object.
                   swL2StpPortAdminPathCost 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.12 unsigned32 read-write
The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object swL2StpPortPathCost, which returns the operational value of the path cost.
                   swL2StpPortPriority 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.13 integer read-write
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of swL2StpPort.
                   swL2STPPortState 1.3.6.1.4.1.171.11.113.8.1.2.15.4.1.14 integer read-write
Used to describe the enable/disable state of the loopback prevention function on a per-port basis. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2MulticastFilterMode 1.3.6.1.4.1.171.11.113.8.1.2.17
           swL2MulticastFilterModeVlanTable 1.3.6.1.4.1.171.11.113.8.1.2.17.1 no-access
A table that contains information about the VLAN multicast filter mode.
               swL2MulticastFilterModeVlanEntry 1.3.6.1.4.1.171.11.113.8.1.2.17.1.1 no-access
A list of multicast filter mode information for each VLAN.
                   swL2MulticastFilterVid 1.3.6.1.4.1.171.11.113.8.1.2.17.1.1.1 integer read-only
Indicates the VID for each VLAN.
                   swL2MulticastFilterVlanMode 1.3.6.1.4.1.171.11.113.8.1.2.17.1.1.2 integer read-write
Specifies the multicast filter mode for each VLAN. Enumeration: 'forward-unregistered-groups': 2, 'forward-all-groups': 1, 'filter-unregistered-groups': 3.
           swL2MulticastFilterModePortTable 1.3.6.1.4.1.171.11.113.8.1.2.17.2 no-access
A table that contains information about the port multicast filter mode.
               swL2MulticastFilterModePortEntry 1.3.6.1.4.1.171.11.113.8.1.2.17.2.1 no-access
A list of multicast filter mode information for each port.
                   swL2MulticastFilterPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.17.2.1.1 integer read-only
Specifies the port number.
                   swL2MulticastFilterPortMode 1.3.6.1.4.1.171.11.113.8.1.2.17.2.1.2 integer read-write
Specifies multicast filter mode for each port. Enumeration: 'forward-unregistered-groups': 2, 'forward-all-groups': 1, 'filter-unregistered-groups': 3.
     swL2LoopDetectMgmt 1.3.6.1.4.1.171.11.113.8.1.2.18
           swL2LoopDetectCtrl 1.3.6.1.4.1.171.11.113.8.1.2.18.1
               swL2LoopDetectAdminState 1.3.6.1.4.1.171.11.113.8.1.2.18.1.1 integer read-write
This object indicates the loopback detection status for the system. Enumeration: 'disabled': 2, 'enabled': 1.
               swL2LoopDetectInterval 1.3.6.1.4.1.171.11.113.8.1.2.18.1.2 integer read-write
This object indicates the interval value, the range is from 1 to 32767 seconds.
               swL2LoopDetectRecoverTime 1.3.6.1.4.1.171.11.113.8.1.2.18.1.3 integer read-write
This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function.
               swL2LoopDetectMode 1.3.6.1.4.1.171.11.113.8.1.2.18.1.4 integer read-write
This object indicates the loopback detection mode for the system. Enumeration: 'port-based': 2, 'vlan-based': 1.
               swL2LoopDetectTrapMode 1.3.6.1.4.1.171.11.113.8.1.2.18.1.5 integer read-write
This object indicates the loopback detection trap mode for the system. Enumeration: 'both': 4, 'none': 1, 'loop_cleared': 3, 'loop_detected': 2.
           swL2LoopDetectPortMgmt 1.3.6.1.4.1.171.11.113.8.1.2.18.2
               swL2LoopDetectPortTable 1.3.6.1.4.1.171.11.113.8.1.2.18.2.1 no-access
The table specifies the loopback detection function specified by port.
                   swL2LoopDetectPortEntry 1.3.6.1.4.1.171.11.113.8.1.2.18.2.1.1 no-access
The table specifies the loopback detection function specified by port.
                       swL2LoopDetectPortIndex 1.3.6.1.4.1.171.11.113.8.1.2.18.2.1.1.1 integer read-only
This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module
                       swL2LoopDetectPortState 1.3.6.1.4.1.171.11.113.8.1.2.18.2.1.1.2 integer read-write
This object indicates the loopback detection function state on the port. Enumeration: 'disabled': 2, 'enabled': 1.
                       swL2LoopDetectPortLoopVLAN 1.3.6.1.4.1.171.11.113.8.1.2.18.2.1.1.3 displaystring read-only
This object indicates the VLAN list that has detected a loopback.
                       swL2LoopDetectPortLoopStatus 1.3.6.1.4.1.171.11.113.8.1.2.18.2.1.1.4 integer read-only
This object indicates the port status. Enumeration: 'none': 4, 'error': 3, 'loop': 2, 'normal': 1.
     swL2MgmtMIBTraps 1.3.6.1.4.1.171.11.113.8.1.2.100
             swL2Notify 1.3.6.1.4.1.171.11.113.8.1.2.100.1
                 swL2NotifyMgmt 1.3.6.1.4.1.171.11.113.8.1.2.100.1.1
                     swL2macNotificationSeverity 1.3.6.1.4.1.171.11.113.8.1.2.100.1.1.1 agentnotifylevel read-write
Indicates the level of macNotification detection.
                     swL2PortSecurityViolationSeverity 1.3.6.1.4.1.171.11.113.8.1.2.100.1.1.2 agentnotifylevel read-write
Indicates the level of PortSecurityViolation detection.
                 swL2NotifyPrefix 1.3.6.1.4.1.171.11.113.8.1.2.100.1.2
                     swL2NotifFirmware 1.3.6.1.4.1.171.11.113.8.1.2.100.1.2.0
                         swL2macNotification 1.3.6.1.4.1.171.11.113.8.1.2.100.1.2.0.1
This trap indicates the MAC address variations in the address table .
                         swL2PortSecurityViolationTrap 1.3.6.1.4.1.171.11.113.8.1.2.100.1.2.0.2
When the port_security trap is enabled, new MAC addresses that violate the pre-defined port security configuration will trigger trap messages to be sent out.
                         swL2PortLoopOccurred 1.3.6.1.4.1.171.11.113.8.1.2.100.1.2.0.3
The trap is sent when a Port loop occurs.
                         swL2PortLoopRestart 1.3.6.1.4.1.171.11.113.8.1.2.100.1.2.0.4
The trap is sent when a Port loop restarts after the interval time.
                         swL2VlanLoopOccurred 1.3.6.1.4.1.171.11.113.8.1.2.100.1.2.0.5
The trap is sent when a Port with a VID loop occurs.
                         swL2VlanLoopRestart 1.3.6.1.4.1.171.11.113.8.1.2.100.1.2.0.6
The trap is sent when a Port with a VID loop restarts after the interval time.
                     swl2NotificationBidings 1.3.6.1.4.1.171.11.113.8.1.2.100.1.2.1
                         swL2macNotifyInfo 1.3.6.1.4.1.171.11.113.8.1.2.100.1.2.1.1 octet string read-only
This object indicates information about the last time the system rebooted.
                         swL2PortSecurityViolationMac 1.3.6.1.4.1.171.11.113.8.1.2.100.1.2.1.2 macaddress no-access
This object indicates the MAC address that violated the port security configuration.
                         swL2VlanLoopDetectVID 1.3.6.1.4.1.171.11.113.8.1.2.100.1.2.1.3 integer no-access
This object indicates the VID that detected a loopback.