DES3028-L2MGMT-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: DES3028-L2MGMT-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swL2MgmtMIB 1.3.6.1.4.1.171.11.63.6.2
The Structure of Layer 2 Network Management Information for enterprise.
     swL2DevMgmt 1.3.6.1.4.1.171.11.63.6.2.1
         swL2DevInfo 1.3.6.1.4.1.171.11.63.6.2.1.1
             swL2DevInfoFrontPanelLedStatus 1.3.6.1.4.1.171.11.63.6.2.1.1.5 octet string read-only
This object is a set of system LED indications. When log in system DES3028/DES3052 which do not support POE, the first two octets is defined as system LED. The first LED is power LED. The second LED is console LED. When log in system DES3028p/DES3052p which support POE, the first four octets are defined as system LED. The first octet is 0x02 and the second octet is 0x01 when in normal mode. Contrarily, the first octet is 0x01 and the second octet is 0x02 when in poe mode. The third octet indicates the power LED. The fourth octet indicates the console LED. The other octets are defined as follow: start on the third or fifth octets separately correspond to system support poe or system which does not support poe indicate the logical port LED (following swL2BasePort ordering). Every two bytes are presented to a port. The first byte is presentd to the Link/Activity LED. The second byte is presented to the Speed LED. Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks. The second significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be 0.
         swL2DevCtrl 1.3.6.1.4.1.171.11.63.6.2.1.2
             swL2DevCtrlSystemReboot 1.3.6.1.4.1.171.11.63.6.2.1.2.1 integer read-write
This object indicates the agent system reboot state. The agent always returns other(1) when this object is read. Enumeration: 'reboot-and-load-factory-default-config': 4, 'other': 1, 'reboot': 2, 'save-config-and-reboot': 3.
             swL2DevCtrlSystemIP 1.3.6.1.4.1.171.11.63.6.2.1.2.2 ipaddress read-write
This object indicates system ip.
             swL2DevCtrlSubnetMask 1.3.6.1.4.1.171.11.63.6.2.1.2.3 ipaddress read-write
This object indicates system subnet mask.
             swL2DevCtrlDefaultGateway 1.3.6.1.4.1.171.11.63.6.2.1.2.4 ipaddress read-write
This object indicates system default gateway.
             swL2DevCtrlManagementVlanId 1.3.6.1.4.1.171.11.63.6.2.1.2.5 vlanid read-write
This object controls which Vlan includes system ip. And the Vlan should have been created.
             swL2DevCtrlIGMPSnooping 1.3.6.1.4.1.171.11.63.6.2.1.2.7 integer read-write
This object indicates layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled . Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlCleanAllStatisticCounter 1.3.6.1.4.1.171.11.63.6.2.1.2.12 integer read-write
As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing. Enumeration: 'active': 2, 'normal': 1.
             swL2DevCtrlSnmpEnableAuthenTraps 1.3.6.1.4.1.171.11.63.6.2.1.2.13 integer read-write
Indicates whether the SNMP entity is permitted to generate authenticationFailure traps. The value of this object overrides any configuration information; as such, it provides a means whereby all authenticationFailure traps may be disabled. Note that it is strongly recommended that this object be stored in non-volatile memory so that it remains constant across re-initializations of the network management system. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlRmonState 1.3.6.1.4.1.171.11.63.6.2.1.2.16 integer read-write
This object can be enabled or disabled RMON. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlIpAutoConfig 1.3.6.1.4.1.171.11.63.6.2.1.2.17 integer read-write
Indicates the status of automatically getting configuration from TFTP server on device Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2MACNotifyState 1.3.6.1.4.1.171.11.63.6.2.1.2.19 integer read-write
This object can enabled or disabled MAC Notification. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2MACNotifyHistorySize 1.3.6.1.4.1.171.11.63.6.2.1.2.20 integer read-write
This object indicates the history size of variation MAC in address table. The default value is 1 .
             swL2MACNotifyInterval 1.3.6.1.4.1.171.11.63.6.2.1.2.21 integer read-write
This object indicates the time interval in second for trigger the MAC notify message.
             swL2DevCtrlLLDPState 1.3.6.1.4.1.171.11.63.6.2.1.2.22 integer read-write
Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For the receiving of LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlLLDPForwardMessageState 1.3.6.1.4.1.171.11.63.6.2.1.2.23 integer read-write
When lldp is disabled and lldp forward_message is enabled, the received LLDP Data Units packet will be forwarded. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlAsymVlanState 1.3.6.1.4.1.171.11.63.6.2.1.2.24 integer read-write
This object enables or disables the asymmetric VLAN feature of the device. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2IGMPSnoopingMulticastVlanState 1.3.6.1.4.1.171.11.63.6.2.1.2.25 integer read-write
This indicates the global state of the igmp_snoop multicast_vlan. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlVLANTrunkState 1.3.6.1.4.1.171.11.63.6.2.1.2.26 integer read-write
This indicates the global state of the VLAN trunking feature of the device. Enumeration: 'disabled': 2, 'enabled': 1.
             swL2DevCtrlWeb 1.3.6.1.4.1.171.11.63.6.2.1.2.27
                   swL2DevCtrlWebState 1.3.6.1.4.1.171.11.63.6.2.1.2.27.1 integer read-write
This object controls Web status. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevCtrlTelnet 1.3.6.1.4.1.171.11.63.6.2.1.2.28
                   swL2DevCtrlTelnetState 1.3.6.1.4.1.171.11.63.6.2.1.2.28.1 integer read-write
This object controls the Telnet status. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         swL2DevAlarm 1.3.6.1.4.1.171.11.63.6.2.1.3
             swL2DevAlarmNewRoot 1.3.6.1.4.1.171.11.63.6.2.1.3.1 integer read-write
When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevAlarmTopologyChange 1.3.6.1.4.1.171.11.63.6.2.1.3.2 integer read-write
This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled (3), the Topology Change trap is sent by the device when any of its configured ports transition from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device does not send the trap if this object value is disabled or in another state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swL2DevAlarmLinkChange 1.3.6.1.4.1.171.11.63.6.2.1.3.3 integer read-write
This object determines whether or not to send a trap message when the link changes. If the object is enabled (3), the Link Change trap is sent by the device when any of its port links change. The device does not send the trap if this object value is disabled or in another state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2PortMgmt 1.3.6.1.4.1.171.11.63.6.2.2
         swL2PortInfoTable 1.3.6.1.4.1.171.11.63.6.2.2.1 no-access
A table that contains information about every port.
             swL2PortInfoEntry 1.3.6.1.4.1.171.11.63.6.2.2.1.1 no-access
A list of information for each port of the device.
                 swL2PortInfoPortIndex 1.3.6.1.4.1.171.11.63.6.2.2.1.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortInfoMediumType 1.3.6.1.4.1.171.11.63.6.2.2.1.1.2 integer read-only
This object indicates the port type: fiber or copper. Enumeration: 'copper': 100, 'fiber': 101.
                 swL2PortInfoLinkStatus 1.3.6.1.4.1.171.11.63.6.2.2.1.1.4 integer read-only
This object indicates the port link status. Enumeration: 'link-fail': 3, 'other': 1, 'link-pass': 2.
                 swL2PortInfoNwayStatus 1.3.6.1.4.1.171.11.63.6.2.2.1.1.5 integer read-only
This object indicates the port speed and duplex mode. Enumeration: 'half-10Mbps': 2, 'full-1Gigabps': 7, 'full-100Mbps': 5, 'auto': 1, 'half-1Gigabps': 6, 'full-10Mbps': 3, 'half-100Mbps': 4.
         swL2PortCtrlTable 1.3.6.1.4.1.171.11.63.6.2.2.2 no-access
A table that contains control information about every port.
             swL2PortCtrlEntry 1.3.6.1.4.1.171.11.63.6.2.2.2.1 no-access
A list of control information for each port of the device.
                 swL2PortCtrlPortIndex 1.3.6.1.4.1.171.11.63.6.2.2.2.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortCtrlPortMediumType 1.3.6.1.4.1.171.11.63.6.2.2.2.1.2 integer read-write
This object indicates the port type: fiber or copper. Enumeration: 'copper': 100, 'fiber': 101.
                 swL2PortCtrlAdminState 1.3.6.1.4.1.171.11.63.6.2.2.2.1.3 integer read-write
This object decides whether the port is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlNwayState 1.3.6.1.4.1.171.11.63.6.2.2.2.1.4 integer read-write
Choose the port speed, duplex mode, and N-Way function mode. Enumeration: 'nway-disabled-1Gigabps-Full-Master': 8, 'nway-disabled-1Gigabps-Full': 7, 'nway-disabled-1Gigabps-Full-Slave': 9, 'nway-disabled-10Mbps-Full': 3, 'nway-disabled-100Mbps-Full': 5, 'nway-auto': 1, 'nway-disabled-10Mbps-Half': 2, 'nway-disabled-100Mbps-Half': 4.
                 swL2PortCtrlFlowCtrlState 1.3.6.1.4.1.171.11.63.6.2.2.2.1.5 integer read-write
Set the flow control function as enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlDescription 1.3.6.1.4.1.171.11.63.6.2.2.2.1.6 displaystring read-write
The object describes the ports in text.
                 swL2PortCtrlAddressLearning 1.3.6.1.4.1.171.11.63.6.2.2.2.1.7 integer read-write
This object decides whether the address learning is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlMACNotifyState 1.3.6.1.4.1.171.11.63.6.2.2.2.1.8 integer read-write
This object sets each port's MAC notification state. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2PortCtrlMulticastfilter 1.3.6.1.4.1.171.11.63.6.2.2.2.1.9 integer read-write
This object decides the multicast packet filtering mode on this port. Enumeration: 'forward-unregistered-groups': 2, 'filter-unregistered-groups': 3.
                 swL2PortCtrlMDIXState 1.3.6.1.4.1.171.11.63.6.2.2.2.1.10 integer read-write
This object configures the MDIX setting of the port. The value 'other' is for those entries in which MDIX is not applicable. Enumeration: 'auto': 1, 'other': 4, 'cross': 3, 'normal': 2.
         swL2PortErrTable 1.3.6.1.4.1.171.11.63.6.2.2.3 no-access
A table that contains information about the Err port.
             swL2PortErrEntry 1.3.6.1.4.1.171.11.63.6.2.2.3.1 no-access
A list of information for the err port of the device.
                 swL2PortErrPortIndex 1.3.6.1.4.1.171.11.63.6.2.2.3.1.1 integer read-only
This object indicates the module's port number.(1..Max port number in the module)
                 swL2PortErrPortState 1.3.6.1.4.1.171.11.63.6.2.2.3.1.2 integer read-only
This object decides whether the port state is enabled or disabled. Enumeration: 'disabled': 1, 'enabled': 2.
                 swL2PortErrPortStatus 1.3.6.1.4.1.171.11.63.6.2.2.3.1.3 integer read-only
This object decides whether the PortStatus is err-disabled. Enumeration: 'other': 1, 'err-disabled': 2.
                 swL2PortErrPortReason 1.3.6.1.4.1.171.11.63.6.2.2.3.1.4 integer read-only
This object indicates the module which disabled the port. Enumeration: 'stp-lbd': 1, 'ddm': 3, 'storm-control': 2, 'duld': 4.
                 swL2PortErrDescription 1.3.6.1.4.1.171.11.63.6.2.2.3.1.5 displaystring read-only
The object describes the ports in text.
     swL2QOSMgmt 1.3.6.1.4.1.171.11.63.6.2.3
         swL2QOSBandwidthControlTable 1.3.6.1.4.1.171.11.63.6.2.3.1 no-access
.
             swL2QOSBandwidthControlEntry 1.3.6.1.4.1.171.11.63.6.2.3.1.1 no-access
A list of information contained in swL2QOSBandwidthControlTable.
                 swL2QOSBandwidthPortIndex 1.3.6.1.4.1.171.11.63.6.2.3.1.1.1 integer read-only
Indicates the port.
                 swL2QOSBandwidthRxRate 1.3.6.1.4.1.171.11.63.6.2.3.1.1.2 integer read-write
Indicates the RX Rate(Mbit/sec) of the specifed port. A value of 1024000 means no limit.
                 swL2QOSBandwidthTxRate 1.3.6.1.4.1.171.11.63.6.2.3.1.1.3 integer read-write
Indicates the TX Rate(Mbit/sec) of the specifed port. A value of 1024000 means no limit.
                 swL2QOSBandwidthRadiusRxRate 1.3.6.1.4.1.171.11.63.6.2.3.1.1.4 integer read-only
The Rx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Rx Rate.
                 swL2QOSBandwidthRadiusTxRate 1.3.6.1.4.1.171.11.63.6.2.3.1.1.5 integer read-only
The Tx Rate value comes from the RADIUS server, If an 802.1X port is authenticated, this value will overwrite the locally configured Tx Rate.
         swL2QOSSchedulingTable 1.3.6.1.4.1.171.11.63.6.2.3.2 no-access
.
             swL2QOSSchedulingEntry 1.3.6.1.4.1.171.11.63.6.2.3.2.1 no-access
A list of information contained in the swL2QOSSchedulingTable.
                 swL2QOSSchedulingClassIndex 1.3.6.1.4.1.171.11.63.6.2.3.2.1.1 integer read-only
Indicates the hardware queue number.
                 swL2QOSSchedulingMaxWeight 1.3.6.1.4.1.171.11.63.6.2.3.2.1.4 integer read-write
                 swL2QOSSchedulingMechanism 1.3.6.1.4.1.171.11.63.6.2.3.2.1.5 integer read-only
Indicates the mechanism of QOS scheduling. Enumeration: 'weightfair': 3, 'strict': 1, 'roundrobin': 2.
         swL2QOS8021pUserPriorityTable 1.3.6.1.4.1.171.11.63.6.2.3.3 no-access
.
             swL2QOS8021pUserPriorityEntry 1.3.6.1.4.1.171.11.63.6.2.3.3.1 no-access
A list of information contained in the swL2QOS8021pUserPriorityTable.
                 swL2QOS8021pUserPriorityIndex 1.3.6.1.4.1.171.11.63.6.2.3.3.1.1 integer read-only
The 802.1p user priority.
                 swL2QOS8021pUserPriorityClass 1.3.6.1.4.1.171.11.63.6.2.3.3.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 3 (the highest priority).
         swL2QOS8021pDefaultPriorityTable 1.3.6.1.4.1.171.11.63.6.2.3.4 no-access
.
             swL2QOS8021pDefaultPriorityEntry 1.3.6.1.4.1.171.11.63.6.2.3.4.1 no-access
A list of information contained in the swL2QOS8021pDefaultPriorityTable.
                 swL2QOS8021pDefaultPriorityIndex 1.3.6.1.4.1.171.11.63.6.2.3.4.1.1 integer read-only
Indicates the port number.
                 swL2QOS8021pDefaultPriority 1.3.6.1.4.1.171.11.63.6.2.3.4.1.2 integer read-write
The priority value to assign to untagged packets received by the switch ports on the switch.
                 swL2QOS8021pRadiusPriority 1.3.6.1.4.1.171.11.63.6.2.3.4.1.3 integer read-only
Indicates the value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.
         swL2QOSSchedulingMechanismCtrl 1.3.6.1.4.1.171.11.63.6.2.3.5 integer read-write
This object can control QOS scheduling Mechanism. Enumeration: 'weightfair': 2, 'strict': 1, 'none': 3.
     swL2TrunkMgmt 1.3.6.1.4.1.171.11.63.6.2.4
         swPortTrunkMaxEntries 1.3.6.1.4.1.171.11.63.6.2.4.1 integer32 read-only
The max entries of the swPortTrunkTable
         swPortTrunkMaxPortMembers 1.3.6.1.4.1.171.11.63.6.2.4.2 integer32 read-only
The max number of ports allowed in a trunk.
         swPortTrunkTable 1.3.6.1.4.1.171.11.63.6.2.4.3 no-access
This table specifies the port membership for each logical link.
             swPortTrunkEntry 1.3.6.1.4.1.171.11.63.6.2.4.3.1 no-access
A list of information that specifies which port group forms a single logical link.
                 swPortTrunkIndex 1.3.6.1.4.1.171.11.63.6.2.4.3.1.1 integer32 read-only
The index of logical port trunk.
                 swPortTrunkMasterPort 1.3.6.1.4.1.171.11.63.6.2.4.3.1.2 integer32 read-only
The object indicates the master port number of the port trunk entry. The first port of the trunk is implicitly configured to be the master logical port. When using a Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be the same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on).
                 swPortTrunkPortList 1.3.6.1.4.1.171.11.63.6.2.4.3.1.3 portlist read-only
Indicate member ports of a logical trunk.
                 swPortTrunkType 1.3.6.1.4.1.171.11.63.6.2.4.3.1.4 integer read-only
This object indicates the type of this entry. Enumeration: 'lacp': 2, 'static': 1.
                 swPortTrunkActivePort 1.3.6.1.4.1.171.11.63.6.2.4.3.1.5 portlist read-only
This object indicates the active ports of this entry.
                 swPortTrunkState 1.3.6.1.4.1.171.11.63.6.2.4.3.1.6 rowstatus read-only
This object indicates the status of this entry. when the state is CreatAndGo (4),the type of trunk is static (1); when the state is CreatAndWait (5), the type of trunk is lacp(2).
                 swPortTrunkFloodingPort 1.3.6.1.4.1.171.11.63.6.2.4.3.1.7 integer32 read-only
The flooding port of every trunk.
         swL2TrunkAlgorithm 1.3.6.1.4.1.171.11.63.6.2.4.4 integer read-write
This object configures part of the packet to be examined by the switch when selecting the egress port for transmitting load-sharing data. Enumeration: 'other': 1, 'mac-source-dest': 4, 'mac-destination': 3, 'mac-source': 2.
         swL2TrunkLACPPortTable 1.3.6.1.4.1.171.11.63.6.2.4.5 no-access
This table specifies which port group a set of ports (up to 8) is formed into a single logical link.
             swL2TrunkLACPPortEntry 1.3.6.1.4.1.171.11.63.6.2.4.5.1 no-access
A list of information specifies which port group a set of ports (up to 8) is formed into a single logical link.
                 swL2TrunkLACPPortIndex 1.3.6.1.4.1.171.11.63.6.2.4.5.1.1 integer read-only
The index of the logical port LACP.
                 swL2TrunkLACPPortState 1.3.6.1.4.1.171.11.63.6.2.4.5.1.2 integer read-write
The state of the logical port LACP. Enumeration: 'active': 1, 'passive': 2.
         swL2TrunkVLANTable 1.3.6.1.4.1.171.11.63.6.2.4.6 no-access
This table is used to manage the VLAN trunking feature of the device.
             swL2TrunkVLANEntry 1.3.6.1.4.1.171.11.63.6.2.4.6.1 no-access
This object is used to configure the VLAN trunking settings for each port.
                 swL2TrunkVLANPort 1.3.6.1.4.1.171.11.63.6.2.4.6.1.1 integer read-only
This object indicates the port being configured.
                 swL2TrunkVLANState 1.3.6.1.4.1.171.11.63.6.2.4.6.1.2 integer read-write
The state of the logical port LACP. Enumeration: 'disabled': 2, 'enabled': 1.
     swPortMirrorPackage 1.3.6.1.4.1.171.11.63.6.2.6
         swPortMirrorRxPortList 1.3.6.1.4.1.171.11.63.6.2.6.2 portlist read-write
This object indicates the Rx port list of ports to be sniffed.
         swPortMirrorTxPortList 1.3.6.1.4.1.171.11.63.6.2.6.3 portlist read-write
This object indicates the Tx port list of ports to be sniffed.
         swPortMirrorTargetPort 1.3.6.1.4.1.171.11.63.6.2.6.4 integer32 read-write
This object indicates the switch whose port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to the bridge MIB, etc.
         swPortMirrorState 1.3.6.1.4.1.171.11.63.6.2.6.5 integer read-write
This object indicates the status of this entry. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swIGMPPackage 1.3.6.1.4.1.171.11.63.6.2.7
         swL2IGMPMaxSupportedVlans 1.3.6.1.4.1.171.11.63.6.2.7.1 integer read-only
The maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable).
         swL2IGMPMaxIpGroupNumPerVlan 1.3.6.1.4.1.171.11.63.6.2.7.2 integer read-only
The maximum number of multicast IP groups per VLAN in the layer 2 IGMP information table (swL2IGMPQueryInfoTable).
         swL2IGMPCtrlTable 1.3.6.1.4.1.171.11.63.6.2.7.3 no-access
The table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If the VLAN mode is disabled, there is only one entry in the table, with index 1. If VLAN is in Port-Based or 802.1q mode, the number of entries can be up to 12, with an index range from 1 to 12.
             swL2IGMPCtrlEntry 1.3.6.1.4.1.171.11.63.6.2.7.3.1 no-access
An entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP captures the switch (swL2DevCtrlIGMPSnooping) is enabled.
                 swL2IGMPCtrlVid 1.3.6.1.4.1.171.11.63.6.2.7.3.1.1 integer read-only
This object indicates the IGMP control entry's VLAN ID. If VLAN is disabled, the VID is always 0 and cannot be changed by management users. If VLAN is in Port-Based mode, the VID is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the VID setting can vary from 1 to 4094 by management user, and the VID in each entry must be unique in the IGMP Control Table.
                 swL2IGMPQueryInterval 1.3.6.1.4.1.171.11.63.6.2.7.3.1.2 integer read-write
The frequency at which IGMP Host-Query packets are transmitted on this switch.
                 swL2IGMPMaxResponseTime 1.3.6.1.4.1.171.11.63.6.2.7.3.1.3 integer read-write
The maximum query response time on this switch.
                 swL2IGMPRobustness 1.3.6.1.4.1.171.11.63.6.2.7.3.1.4 integer read-write
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
                 swL2IGMPLastMemberQueryInterval 1.3.6.1.4.1.171.11.63.6.2.7.3.1.5 integer read-write
The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
                 swL2IGMPHostTimeout 1.3.6.1.4.1.171.11.63.6.2.7.3.1.6 integer read-write
The timer value for sending IGMP query packets when none was sent by the host in the LAN. The timer works on a per-VLAN basis. Our device will be activated to send the query message if the timer expires. Please reference RFC2236-1997.
                 swL2IGMPRouteTimeout 1.3.6.1.4.1.171.11.63.6.2.7.3.1.7 integer read-write
The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
                 swL2IGMPLeaveTimer 1.3.6.1.4.1.171.11.63.6.2.7.3.1.8 integer read-write
When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.
                 swL2IGMPQueryState 1.3.6.1.4.1.171.11.63.6.2.7.3.1.9 integer read-write
This object decides if the IGMP query is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
                 swL2IGMPCurrentState 1.3.6.1.4.1.171.11.63.6.2.7.3.1.10 integer read-only
This object indicates the current IGMP query state. Enumeration: 'non-querier': 3, 'other': 1, 'querier': 2.
                 swL2IGMPCtrlState 1.3.6.1.4.1.171.11.63.6.2.7.3.1.11 integer read-write
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable (2) - IGMP function is disabled for this entry. enable (3) - IGMP function is enabled for this entry. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                 swL2IGMPFastLeave 1.3.6.1.4.1.171.11.63.6.2.7.3.1.12 integer read-write
Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                 swL2IGMPDynIPMultVlanState 1.3.6.1.4.1.171.11.63.6.2.7.3.1.13 integer read-write
This object is used to disable or enable the dynamic IP multicast feature in this VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                 swL2IGMPDynIPMultVlanAge 1.3.6.1.4.1.171.11.63.6.2.7.3.1.14 integer read-write
This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
         swL2IGMPQueryInfoTable 1.3.6.1.4.1.171.11.63.6.2.7.4 no-access
The table contains the number of current IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device.
             swL2IGMPQueryInfoEntry 1.3.6.1.4.1.171.11.63.6.2.7.4.1 no-access
Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entry are all enabled.
                 swL2IGMPInfoVid 1.3.6.1.4.1.171.11.63.6.2.7.4.1.1 integer read-only
This object indicates the VID of the associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).
                 swL2IGMPInfoQueryCount 1.3.6.1.4.1.171.11.63.6.2.7.4.1.2 integer read-only
This object indicates the number of query packets received since the IGMP function enabled, on a per-VLAN basis.
                 swL2IGMPInfoTxQueryCount 1.3.6.1.4.1.171.11.63.6.2.7.4.1.3 integer read-only
This object indicates the send count of IGMP query messages, on a per-VLAN basis. In case of the IGMP timer expiring, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
         swL2IGMPInfoTable 1.3.6.1.4.1.171.11.63.6.2.7.5 no-access
The table containing current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. Also see swL2FilterMgmt description.
             swL2IGMPInfoEntry 1.3.6.1.4.1.171.11.63.6.2.7.5.1 no-access
Information about current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled.
                 swL2IGMPVid 1.3.6.1.4.1.171.11.63.6.2.7.5.1.1 integer read-only
This object indicates the VID of an individual IGMP table entry. It shows the VID of IGMP report information captured on the network.
                 swL2IGMPGroupIpAddr 1.3.6.1.4.1.171.11.63.6.2.7.5.1.2 ipaddress read-only
This object is the identify group IP address which is captured from IGMP packet, on a per-VLAN basis.
                 swL2IGMPMacAddr 1.3.6.1.4.1.171.11.63.6.2.7.5.1.3 macaddress read-only
This object identifies the MAC address which is corresponding to swL2IGMPGroupIpAddr, on a per-VLAN basis.
                 swL2IGMPPortMap 1.3.6.1.4.1.171.11.63.6.2.7.5.1.4 portlist read-only
This object indicates which ports belong to the same multicast group, on a per-VLAN basis. Each multicast group has an octet string to indicate the port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0' (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets represent one unit port according to its logic port. If the unit is less than 32 ports, the other port will just fill this value with zeros.
                 swL2IGMPIpGroupReportCount 1.3.6.1.4.1.171.11.63.6.2.7.5.1.5 integer read-only
This object indicates how many report packets were received by our device corresponding with this entry that has the IGMP function enabled, on a per-VLAN basis.
         swL2IGMPRouterPortTable 1.3.6.1.4.1.171.11.63.6.2.7.6 no-access
The information of the router port table.
             swL2IGMPRouterPortEntry 1.3.6.1.4.1.171.11.63.6.2.7.6.1 no-access
The entry of the swL2IGMPRouterPortTable.
                 swL2IGMPRouterPortVlanid 1.3.6.1.4.1.171.11.63.6.2.7.6.1.1 integer read-only
This object indicates the VLAN ID of the router port entry.
                 swL2IGMPRouterPortVlanName 1.3.6.1.4.1.171.11.63.6.2.7.6.1.2 snmpadminstring read-only
This object indicates the VLAN name of the router port entry.
                 swL2IGMPRouterPortStaticPortList 1.3.6.1.4.1.171.11.63.6.2.7.6.1.3 portlist read-write
This object indicates the static portlist of the router port entry.
                 swL2IGMPRouterPortDynamicPortList 1.3.6.1.4.1.171.11.63.6.2.7.6.1.4 portlist read-only
This object indicates the dynamic portlist of the router port entry.
                 swL2IGMPRouterPortForbiddenPortList 1.3.6.1.4.1.171.11.63.6.2.7.6.1.5 portlist read-write
This object indicates the forbidden portlist of the router port entry.
         swL2IGMPAccessAuthTable 1.3.6.1.4.1.171.11.63.6.2.7.7 no-access
This table is used to manage the IGMP Access Authentication configurations of the device.
             swL2IGMPAccessAuthEntry 1.3.6.1.4.1.171.11.63.6.2.7.7.1 no-access
A list of manageable entities for IGMP Access Authentication. The configuration is done per port.
                 swL2IGMPAccessAuthPort 1.3.6.1.4.1.171.11.63.6.2.7.7.1.1 integer read-only
The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured.
                 swL2IGMPAccessAuthState 1.3.6.1.4.1.171.11.63.6.2.7.7.1.2 integer read-write
This object denotes the status of IGMP Access Authentication of the port. Enumeration: 'disabled': 1, 'enabled': 2.
         swL2IGMPMulticastVlanTable 1.3.6.1.4.1.171.11.63.6.2.7.8 no-access
Information about the IGMP snooping multicast VLAN table.
             swL2IGMPMulticastVlanEntry 1.3.6.1.4.1.171.11.63.6.2.7.8.1 no-access
The entry of swL2IGMPMulticastVlanTable.
                 swL2IGMPMulticastVlanid 1.3.6.1.4.1.171.11.63.6.2.7.8.1.1 integer read-only
This object indicates the VLAN ID of the IGMP snooping multicast VLAN entry.
                 swL2IGMPMulticastVlanName 1.3.6.1.4.1.171.11.63.6.2.7.8.1.2 displaystring read-only
This object indicates the VLAN name of the IGMP snooping multicast VLAN entry.
                 swL2IGMPMulticastVlanSourcePort 1.3.6.1.4.1.171.11.63.6.2.7.8.1.3 portlist read-write
This object indicates the port list of the source ports of the IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry and the IGMP control messages received from the member ports will be forwarded to the source ports.
                 swL2IGMPMulticastVlanMemberPort 1.3.6.1.4.1.171.11.63.6.2.7.8.1.4 portlist read-write
This object indicates the port list of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry and the IGMP control messages received from the member ports will be forwarded to the source ports.
                 swL2IGMPMulticastVlanTagMemberPort 1.3.6.1.4.1.171.11.63.6.2.7.8.1.5 portlist read-write
This object indicates the port list of the tag member ports of the IGMP snooping multicast VLAN.
                 swL2IGMPMulticastVlanState 1.3.6.1.4.1.171.11.63.6.2.7.8.1.6 integer read-write
This object can be used to enable or disable the IGMP snooping multicast VLAN. Enumeration: 'disabled': 2, 'enabled': 1.
                 swL2IGMPMulticastVlanReplaceSourceIp 1.3.6.1.4.1.171.11.63.6.2.7.8.1.7 ipaddress read-write
The replacement source IP of this multicast VLAN.
                 swL2IGMPMulticastVlanRowStatus 1.3.6.1.4.1.171.11.63.6.2.7.8.1.8 rowstatus read-only
This object indicates the status of this entry.
                 swL2IGMPMulticastVlanRemoveAllMcastAddrListAction 1.3.6.1.4.1.171.11.63.6.2.7.8.1.9 integer read-write
This object indicates whether to remove all the multicast address lists from the IGMP multicast VLAN or not. Enumeration: 'start': 2, 'other': 1.
                 swL2IGMPMulticastVlanUntagSourcePort 1.3.6.1.4.1.171.11.63.6.2.7.8.1.10 portlist read-write
This object indicates the untagged member ports to add to the multicast VLAN.
                 swL2IGMPMulticastVlanRemapPriority 1.3.6.1.4.1.171.11.63.6.2.7.8.1.11 integer read-only
The priority value (0 to 7) to be associated with the data traffic to be forwarded on the multicast VLAN. When set to 8, the packet's original priority will be used.
                 swL2IGMPMulticastVlanReplacePriority 1.3.6.1.4.1.171.11.63.6.2.7.8.1.12 integer read-only
Specifies that a packet's priority will be changed by the switch based on the remap priority. This flag will only take effect when remap priority is set. Enumeration: 'false': 2, 'true': 1.
         swL2IGMPMulticastVlanGroupTable 1.3.6.1.4.1.171.11.63.6.2.7.9 no-access
The table containing the IGMP snooping multicast VLAN group information
             swL2IGMPMulticastVlanGroupEntry 1.3.6.1.4.1.171.11.63.6.2.7.9.1 no-access
Information about the current IGMP snooping multicast VLAN group.
                 swL2IGMPMulticastVlanGroupVid 1.3.6.1.4.1.171.11.63.6.2.7.9.1.1 integer read-only
This object indicates the VID of the IGMP snooping multicast VLAN group.
                 swL2IGMPMulticastVlanGroupFromIp 1.3.6.1.4.1.171.11.63.6.2.7.9.1.2 ipaddress read-only
Specifies the multicast address list for this VLAN.
                 swL2IGMPMulticastVlanGroupToIp 1.3.6.1.4.1.171.11.63.6.2.7.9.1.3 ipaddress read-only
Specifies the multicast address list for this VLAN.
                 swL2IGMPMulticastVlanGroupStatus 1.3.6.1.4.1.171.11.63.6.2.7.9.1.4 rowstatus read-only
This object indicates the status of this entry.
         swL2IGMPv3Table 1.3.6.1.4.1.171.11.63.6.2.7.10 no-access
This table contains the IGMP snooping V3 information.
               swL2IGMPv3Entry 1.3.6.1.4.1.171.11.63.6.2.7.10.1 no-access
Information about the current IGMP snooping V3.
                   swL2IGMPv3SourceIPAddr 1.3.6.1.4.1.171.11.63.6.2.7.10.1.1 ipaddress read-only
This object identifies the source IP addresses from the group where they were captured from. IGMP packets, on a per-VLAN basis.
                   swL2IGMPv3Forwarding 1.3.6.1.4.1.171.11.63.6.2.7.10.1.2 integer read-only
This object identifies if the packets from the source IP addresses are forwarding or not. Enumeration: 'disabled': 2, 'enabled': 1.
                   swL2IGMPv3ExpireTimer 1.3.6.1.4.1.171.11.63.6.2.7.10.1.3 integer read-only
This object identifies the leaving times of the source time.
         swIGMPSnoopingGroupTable 1.3.6.1.4.1.171.11.63.6.2.7.11 no-access
The table contains the current IGMP snooping group information captured by the device.
               swIGMPSnoopingGroupEntry 1.3.6.1.4.1.171.11.63.6.2.7.11.1 no-access
Information about the current IGMP snooping group information which has been captured by the device.
                   swIGMPSnoopingGroupVid 1.3.6.1.4.1.171.11.63.6.2.7.11.1.1 integer read-only
This object indicates the VID of the individual IGMP snooping group table entry.
                   swIGMPSnoopingGroupGroupAddr 1.3.6.1.4.1.171.11.63.6.2.7.11.1.2 ipaddress read-only
This object identifies the group IP address which has been captured from the IGMP packet, on a per-VLAN basis.
                   swIGMPSnoopingGroupSourceAddr 1.3.6.1.4.1.171.11.63.6.2.7.11.1.3 ipaddress read-only
This object identifies the source addresses.
                   swIGMPSnoopingGroupIncludePortMap 1.3.6.1.4.1.171.11.63.6.2.7.11.1.4 portlist read-only
This object indicates the port list under INCLUDE mode.
                   swIGMPSnoopingGroupExcludePortMap 1.3.6.1.4.1.171.11.63.6.2.7.11.1.5 portlist read-only
This object indicates the port list under EXCLUDE mode.
                   swIGMPSnoopingGroupReportCount 1.3.6.1.4.1.171.11.63.6.2.7.11.1.6 integer read-only
This object indicates how many report packets were received by our device corresponding with this entry that has the IGMP function enabled, on a per-group basis.
                   swIGMPSnoopingGroupUpTime 1.3.6.1.4.1.171.11.63.6.2.7.11.1.7 timeticks read-only
This object indicates how long since the group was detected.
                   swIGMPSnoopingGroupExpiryTime 1.3.6.1.4.1.171.11.63.6.2.7.11.1.8 timeticks read-only
This object indicates the time left before this group will be aged out.
                   swIGMPSnoopingGroupRouterPorts 1.3.6.1.4.1.171.11.63.6.2.7.11.1.9 portlist read-only
This object indicates the port number of the router ports.
         swL2IGMPDynIpMultMgmt 1.3.6.1.4.1.171.11.63.6.2.7.12
               swL2IGMPDynIPMultMaxEntry 1.3.6.1.4.1.171.11.63.6.2.7.12.1 integer read-write
This object specifies the maximum number of entries which can be learned by dynamic IP multicast.
               swL2IGMPSnoopingClearDynIpMult 1.3.6.1.4.1.171.11.63.6.2.7.12.2
                   swL2IGMPSnoopingClearDynIpMultVID 1.3.6.1.4.1.171.11.63.6.2.7.12.2.1 vlanid read-write
This object indicates the VLAN identifier where the data driven entries will be removed from.
                   swL2IGMPSnoopingClearDynIpMultIP 1.3.6.1.4.1.171.11.63.6.2.7.12.2.2 ipaddress read-write
This object indicates the IP address of the IGMP snooping group from which the data driven entries will be removed.
                   swL2IGMPSnoopingClearDynIpMultAction 1.3.6.1.4.1.171.11.63.6.2.7.12.2.3 integer read-write
Setting this object will clear the data driven entries. all - Remove all learned data driven groups. VLAN - Clear all data driven entries in the VLAN specified in swIGMPSnoopingClearDynIpMultVID. group - Clear the group with the address specified in swL2IGMPSnoopingClearDynIpMultIP in the VLAN specified in swIGMPSnoopingClearDynIpMultVID. Enumeration: 'all': 1, 'vlan': 2, 'group': 3, 'other': 4.
     swL2TrafficSegMgmt 1.3.6.1.4.1.171.11.63.6.2.12
           swL2TrafficSegTable 1.3.6.1.4.1.171.11.63.6.2.12.1 no-access
This table specifies the port just can forward traffic to the specific port list.
               swL2TrafficSegEntry 1.3.6.1.4.1.171.11.63.6.2.12.1.1 no-access
A list of information specifies the port with its traffic forward list.
                   swL2TrafficSegPort 1.3.6.1.4.1.171.11.63.6.2.12.1.1.1 integer read-only
The port number of the logical port.
                   swL2TrafficSegForwardPorts 1.3.6.1.4.1.171.11.63.6.2.12.1.1.2 portlist read-write
The port list that the specific port can forward traffic.
     swL2PortSecurityMgmt 1.3.6.1.4.1.171.11.63.6.2.15
           swL2PortSecurityControlTable 1.3.6.1.4.1.171.11.63.6.2.15.1 no-access
The port security feature controls the address leaning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this port, the first N learned addresses are locked at this port as a static entry. When the learned address number reaches N, any incoming packet without learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned at this port.
               swL2PortSecurityControlEntry 1.3.6.1.4.1.171.11.63.6.2.15.1.1 no-access
A list of information contained in the swL2PortSecurityControlTable.
                   swL2PortSecurityPortIndex 1.3.6.1.4.1.171.11.63.6.2.15.1.1.1 integer read-only
Indicates a secured port to lock address learning.
                   swL2PortSecurityMaxLernAddr 1.3.6.1.4.1.171.11.63.6.2.15.1.1.2 integer read-write
Indicates the allowable number of addresses to be learned at this port.
                   swL2PortSecurityMode 1.3.6.1.4.1.171.11.63.6.2.15.1.1.3 integer read-write
Indicates the mode of locking address. In deleteOnTimeout (3) mode - the locked addresses can be aged out after the aging timer expires. In this mode, when the locked address is aged out, the number of addresses that can be learned has to be increased by one. In deleteOnReset (4) mode - never age out the locked addresses unless restarting the system to prevent port movement or intrusion. Enumeration: 'permanent': 2, 'other': 1, 'deleteOnTimeout': 3, 'deleteOnReset': 4.
                   swL2PortSecurityAdmState 1.3.6.1.4.1.171.11.63.6.2.15.1.1.4 integer read-write
Indicates an administration state of locking address. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
           swL2PortSecurityTrapLogState 1.3.6.1.4.1.171.11.63.6.2.15.2 integer read-write
When enabled (2), whenever there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out and the relevant information will be logged in the system. Enumeration: 'enable': 2, 'other': 1, 'disable': 3.
           swL2PortSecurityDelCtrl 1.3.6.1.4.1.171.11.63.6.2.15.3
               swL2PortSecurityDelVlanName 1.3.6.1.4.1.171.11.63.6.2.15.3.1 displaystring read-write
Indicates the VLAN name.
               swL2PortSecurityDelPort 1.3.6.1.4.1.171.11.63.6.2.15.3.2 integer read-write
Indicates the port. 0 means the function dose not work now.
               swL2PortSecurityDelMacAddress 1.3.6.1.4.1.171.11.63.6.2.15.3.3 macaddress read-write
Specifies the MAC address.
               swL2PortSecurityDelActivity 1.3.6.1.4.1.171.11.63.6.2.15.3.4 integer read-write
Enumeration: 'start': 2, 'none': 1.
     swL2CosMgmt 1.3.6.1.4.1.171.11.63.6.2.17
           swL2CosPriorityCtrl 1.3.6.1.4.1.171.11.63.6.2.17.3
               swL2CosPriorityTable 1.3.6.1.4.1.171.11.63.6.2.17.3.1 no-access
Used to show and configure per port priority-based QoS features on the switch.
                   swL2CosPriorityEntry 1.3.6.1.4.1.171.11.63.6.2.17.3.1.1 no-access
A list of information contained in the swL2CosPriorityTable.
                       swL2CosPriorityPort 1.3.6.1.4.1.171.11.63.6.2.17.3.1.1.1 integer read-only
The port number of CoS Priority.
                       swL2CosPriorityPortPRI 1.3.6.1.4.1.171.11.63.6.2.17.3.1.1.2 integer read-write
Indicates the port_priority state for CoS. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
                       swL2CosPriorityEtherPRI 1.3.6.1.4.1.171.11.63.6.2.17.3.1.1.3 integer read-write
Enable Ethernet frame based priority. When set ether8021p (2), enable 802.1p QoS; When set macBase (3), enable MAC-based QoS; When set disable (1), disable Ethernet frame based priority. Enumeration: 'disable': 1, 'macBase': 3, 'ether8021p': 2.
                       swL2CosPriorityIpPRI 1.3.6.1.4.1.171.11.63.6.2.17.3.1.1.4 integer read-write
Enable IP priority QoS. When set tos (2), enable TOS based QoS; When set dscp (3), enable DSCP based QoS; When set disable (1), disable IP priority QoS. Enumeration: 'tos': 2, 'disable': 1, 'dscp': 3.
                       swL2CosPriorityNone 1.3.6.1.4.1.171.11.63.6.2.17.3.1.1.5 integer read-write
When read, it always returns invalid (2); when write valid (1), it disables all priority in this table. Enumeration: 'valid': 1, 'invalid': 2.
               swL2CosPortPRITable 1.3.6.1.4.1.171.11.63.6.2.17.3.2 no-access
Used to show port-to-class mappings and map specific port to one of the hardware queues available on the switch.
                   swL2CosPortPRIEntry 1.3.6.1.4.1.171.11.63.6.2.17.3.2.1 no-access
A list of information contained in the swL2CosPortPRITable.
                       swL2CosPortPRIIndex 1.3.6.1.4.1.171.11.63.6.2.17.3.2.1.1 integer read-only
Indicates the CoS Priority PortPRI.
                       swL2CosPortPRIClass 1.3.6.1.4.1.171.11.63.6.2.17.3.2.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set one, you must have administrator privileges. And you can set a value of 0 or 3 only, you can't set a value 1 or 2.
               swL2CosMacBasePRITable 1.3.6.1.4.1.171.11.63.6.2.17.3.3 no-access
Used to show MAC priority map to traffic class and map the destination MAC address in incoming packet to one of the hardware queues available on the switch.
                   swL2CosMacBasePRIEntry 1.3.6.1.4.1.171.11.63.6.2.17.3.3.1 no-access
A list of information contained in the swL2CosMacBasePRITable.
                       swL2CosMacBasePRIIndex 1.3.6.1.4.1.171.11.63.6.2.17.3.3.1.1 macaddress read-only
Indicates the CoS Priority MacBasePRI.
                       swL2CosMacBasePRIClass 1.3.6.1.4.1.171.11.63.6.2.17.3.3.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set one, you must have administrator privileges.
               swL2CosTosPRITable 1.3.6.1.4.1.171.11.63.6.2.17.3.4 no-access
Used to show TOS value to traffic class mapping and map the TOS value in the IP header of incoming packet to one of the four hardware queues available on the switch.
                   swL2CosTosPRIEntry 1.3.6.1.4.1.171.11.63.6.2.17.3.4.1 no-access
A list of information contained in the swL2CosTosPRITable.
                       swL2CosTosPRIIndex 1.3.6.1.4.1.171.11.63.6.2.17.3.4.1.1 integer read-only
Indicates the CoS Priority TosPRI.
                       swL2CosTosPRIClass 1.3.6.1.4.1.171.11.63.6.2.17.3.4.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set one, you must have administrator privileges.
               swL2CosDscpPRITable 1.3.6.1.4.1.171.11.63.6.2.17.3.5 no-access
Used to show DSCP value to traffic class mapping and map the DSCP value in the IP header of incoming packet to one of the hardware queues available on the switch.
                   swL2CosDscpPRIEntry 1.3.6.1.4.1.171.11.63.6.2.17.3.5.1 no-access
A list of information contained in the swL2CosDscpPRITable.
                       swL2CosDscpPRIIndex 1.3.6.1.4.1.171.11.63.6.2.17.3.5.1.1 integer read-only
Indicates the CoS Priority DscpPRI.
                       swL2CosDscpPRIClass 1.3.6.1.4.1.171.11.63.6.2.17.3.5.1.2 integer read-write
The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set one, you must have administrator privileges.
     swL2DhcpRelayMgmt 1.3.6.1.4.1.171.11.63.6.2.18
           swL2DhcpRelayState 1.3.6.1.4.1.171.11.63.6.2.18.1 integer read-write
This object indicates whether the DHCP relay function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2DhcpRelayHopCount 1.3.6.1.4.1.171.11.63.6.2.18.2 integer read-write
This object indicates the maximum number of router hops that the DHCP packets can cross.
           swL2DhcpRelayTimeThreshold 1.3.6.1.4.1.171.11.63.6.2.18.3 integer read-write
This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP packet.
           swL2DhcpRelayOption82State 1.3.6.1.4.1.171.11.63.6.2.18.4 integer read-write
This object indicates DHCP relay agent information option 82 function is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2DhcpRelayOption82Check 1.3.6.1.4.1.171.11.63.6.2.18.5 integer read-write
This object indicates the checking mechanism of DHCP relay agent information option 82 is enabled or disabled. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2DhcpRelayOption82Policy 1.3.6.1.4.1.171.11.63.6.2.18.6 integer read-write
This object indicates the reforwarding policy of DHCP relay agent information option 82. replace (1) - Replace the exiting option 82 field in messages. drop (2) - Discard messages with existing option 82 field. keep (3) - Retain the existing option 82 field in messages. Enumeration: 'keep': 3, 'drop': 2, 'replace': 1.
           swL2DhcpRelayCtrlTable 1.3.6.1.4.1.171.11.63.6.2.18.7 no-access
This table specifies the IP address as a destination to forward (relay) DHCP packets to.
               swL2DhcpRelayCtrlEntry 1.3.6.1.4.1.171.11.63.6.2.18.7.1 no-access
A list of information specifies the IP address as a destination to forward (relay) DHCP packets to.
                   swL2DhcpRelayCtrlInterfaceName 1.3.6.1.4.1.171.11.63.6.2.18.7.1.1 displaystring read-only
The name of the IP interface.
                   swL2DhcpRelayCtrlServer 1.3.6.1.4.1.171.11.63.6.2.18.7.1.2 ipaddress read-only
The DHCP server IP address.
                   swL2DhcpRelayCtrlState 1.3.6.1.4.1.171.11.63.6.2.18.7.1.3 integer read-write
This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) - Writing this value to the object, and then the corresponding entry will be removed from the table. valid (3) - This entry resides in the table. Enumeration: 'other': 1, 'valid': 3, 'invalid': 2.
     swL2MgmtMIBTraps 1.3.6.1.4.1.171.11.63.6.2.20
           swL2MgmtMIBTrapPrefix 1.3.6.1.4.1.171.11.63.6.2.20.0
               swL2PortSecurityViolationTrap 1.3.6.1.4.1.171.11.63.6.2.20.0.1
When the port_security trap is enabled, if there's a new MAC that violates the pre-defined port security configuration, a trap will be sent out.
               swL2macNotification 1.3.6.1.4.1.171.11.63.6.2.20.0.2
This trap indicates the MAC address variations in the address table.
               swL2FloodMacDetectedTrap 1.3.6.1.4.1.171.11.63.6.2.20.0.3
If theres a new flooding MAC is detected, a trap will be sent out.
               swL2PortLoopOccurred 1.3.6.1.4.1.171.11.63.6.2.20.0.4
The trap is sent when a Port loop occurs.
               swL2PortLoopRestart 1.3.6.1.4.1.171.11.63.6.2.20.0.5
The trap is sent when a Port loop restarts after the interval time.
           swl2PortSecurityBindings 1.3.6.1.4.1.171.11.63.6.2.20.1
               swL2PortSecurityViolationMac 1.3.6.1.4.1.171.11.63.6.2.20.1.1 macaddress no-access
This object indicates the MAC address that violates the port security configuration.
           swl2NotificationBindings 1.3.6.1.4.1.171.11.63.6.2.20.2
               swL2macNotifyInfo 1.3.6.1.4.1.171.11.63.6.2.20.2.1 octet string read-only
This object indicates the last time reboot information.
               swL2FloodMacDetectedMacVid 1.3.6.1.4.1.171.11.63.6.2.20.2.2 integer read-only
This object indicates the VID of the flooding MAC.
               swL2FloodMacDetectedMacAddress 1.3.6.1.4.1.171.11.63.6.2.20.2.3 macaddress read-only
This object indicates the MAC address of the flooding MAC
     swL2LoopDetectMgmt 1.3.6.1.4.1.171.11.63.6.2.21
           swL2LoopDetectCtrl 1.3.6.1.4.1.171.11.63.6.2.21.1
               swL2LoopDetectAdminState 1.3.6.1.4.1.171.11.63.6.2.21.1.1 integer read-write
This object indicates the loopback detection status for the system. Enumeration: 'disabled': 2, 'enabled': 1.
               swL2LoopDetectInterval 1.3.6.1.4.1.171.11.63.6.2.21.1.2 integer read-write
This object indicates the interval value, the range is from 1 to 32767 seconds.
               swL2LoopDetectRecoverTime 1.3.6.1.4.1.171.11.63.6.2.21.1.3 integer read-write
This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function.
               swL2LoopDetectTrapMode 1.3.6.1.4.1.171.11.63.6.2.21.1.5 integer read-write
This object indicates the loopback detection trap mode for the system. Enumeration: 'both': 4, 'none': 1, 'loop_cleared': 3, 'loop_detected': 2.
           swL2LoopDetectPortMgmt 1.3.6.1.4.1.171.11.63.6.2.21.2
               swL2LoopDetectPortTable 1.3.6.1.4.1.171.11.63.6.2.21.2.1 no-access
The table specifies the loopback detection function specified by port.
                   swL2LoopDetectPortEntry 1.3.6.1.4.1.171.11.63.6.2.21.2.1.1 no-access
The table specifies the loopback detection function specified by port.
                       swL2LoopDetectPortIndex 1.3.6.1.4.1.171.11.63.6.2.21.2.1.1.1 integer read-only
This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module
                       swL2LoopDetectPortState 1.3.6.1.4.1.171.11.63.6.2.21.2.1.1.2 integer read-write
This object indicates the loopback detection function state on the port. Enumeration: 'disabled': 2, 'enabled': 1.
                       swL2LoopDetectPortLoopStatus 1.3.6.1.4.1.171.11.63.6.2.21.2.1.1.4 integer read-only
This object indicates the port status. Enumeration: 'error': 3, 'loop': 2, 'normal': 1.
     swL2MultiFilter 1.3.6.1.4.1.171.11.63.6.2.22
           swL2McastFilterTable 1.3.6.1.4.1.171.11.63.6.2.22.2 no-access
A table that contains information about the multicast filter address.
               swL2McastFilterEntry 1.3.6.1.4.1.171.11.63.6.2.22.2.1 no-access
A list of multicast filter mode information for each profile ID.
                   swL2McastFilterProfileIndex 1.3.6.1.4.1.171.11.63.6.2.22.2.1.1 integer read-only
index for each profile
                   swL2McastFilterProfileName 1.3.6.1.4.1.171.11.63.6.2.22.2.1.2 displaystring read-write
The multicast filter description.
                   swL2McastFilterAddOrDelState 1.3.6.1.4.1.171.11.63.6.2.22.2.1.3 integer read-write
The control multicast filter address. Enumeration: 'none': 1, 'add': 2, 'delete': 3.
                   swL2McastFilterGroupList 1.3.6.1.4.1.171.11.63.6.2.22.2.1.4 displaystring read-write
The multicast filter address group list.
                   swL2McastFilterStatus 1.3.6.1.4.1.171.11.63.6.2.22.2.1.5 rowstatus read-only
This object indicates the status of this entry.
           swL2McastFilterPortTable 1.3.6.1.4.1.171.11.63.6.2.22.3 no-access
A table that is used to bind port to profile ID.
               swL2McastFilterPortEntry 1.3.6.1.4.1.171.11.63.6.2.22.3.1 no-access
A list of information that is used to bind port to profile ID.
                   swL2McastFilterPortGroupPortIndex 1.3.6.1.4.1.171.11.63.6.2.22.3.1.1 integer read-only
The port index.
                   swL2McastFilterPortProfileAddOrDelState 1.3.6.1.4.1.171.11.63.6.2.22.3.1.2 integer read-write
The control multicast filter profile. Enumeration: 'none': 1, 'add': 2, 'delete': 3.
                   swL2McastFilterPortProfileID 1.3.6.1.4.1.171.11.63.6.2.22.3.1.3 integer read-write
This object indicates the profile ID of this entry. When read, it is always 0. When set, 0 can not be set.
           swL2McastFilterPortMaxGroupTable 1.3.6.1.4.1.171.11.63.6.2.22.4 no-access
A table that contains information about the max group number based on port.
               swL2McastFilterPortMaxGroupEntry 1.3.6.1.4.1.171.11.63.6.2.22.4.1 no-access
A list of max group number information for each port.
                   swL2McastFilterPortMaxGroupPortIndex 1.3.6.1.4.1.171.11.63.6.2.22.4.1.1 integer read-only
The port index.
                   swL2McastFilterPortMaxGroup 1.3.6.1.4.1.171.11.63.6.2.22.4.1.2 integer read-write
The max group numbers. The default is 256.
           swL2McastFilterPortInfoTable 1.3.6.1.4.1.171.11.63.6.2.22.5 no-access
A table that contains information about all of the multicast groups for the ports.
               swL2McastFilterPortInfoEntry 1.3.6.1.4.1.171.11.63.6.2.22.5.1 no-access
A list of information about all of the multicast groups for each port.
                   swL2McastFilterPortInfoPortIndex 1.3.6.1.4.1.171.11.63.6.2.22.5.1.1 integer read-only
The port index.
                   swL2McastFilterPortInfoProfileName 1.3.6.1.4.1.171.11.63.6.2.22.5.1.2 displaystring read-only
The multicast filter address profile Name.
     swL2VlanMgmt 1.3.6.1.4.1.171.11.63.6.2.23
           swL2VlanAdvertisementTable 1.3.6.1.4.1.171.11.63.6.2.23.1 no-access
A table containing the advertisement state for each VLAN configured into the device by (local or network) management.
               swL2VlanAdvertisementEntry 1.3.6.1.4.1.171.11.63.6.2.23.1.1 no-access
The advertisement state for each VLAN configured into the device.
                   swL2VlanIndex 1.3.6.1.4.1.171.11.63.6.2.23.1.1.1 integer read-only
The VLAN-ID or other identifier referring to this VLAN.
                   swL2VlanName 1.3.6.1.4.1.171.11.63.6.2.23.1.1.2 displaystring read-only
An administratively assigned string, which may be used to identify the VLAN.
                   swL2VlanAdvertiseState 1.3.6.1.4.1.171.11.63.6.2.23.1.1.3 integer read-write
This object indicates the advertise status of this VLAN entry. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2VlanMultiplyMgmt 1.3.6.1.4.1.171.11.63.6.2.23.2
               swL2VlanMultiplyVlanList 1.3.6.1.4.1.171.11.63.6.2.23.2.1 displaystring read-write
This object specifies the VLAN ID List.
               swL2VlanMultiplyAdvertisement 1.3.6.1.4.1.171.11.63.6.2.23.2.2 integer read-write
This object specifies the advertisement state. Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
               swL2VlanMultiplyPortList 1.3.6.1.4.1.171.11.63.6.2.23.2.3 portlist read-write
Specifies the port list.
               swL2VlanMultiplyPortListAction 1.3.6.1.4.1.171.11.63.6.2.23.2.4 integer read-write
Specifies the action for the port list which specified by swL2VlanMultiplyPortList. Enumeration: 'add-tagged': 2, 'delete': 5, 'other': 1, 'add-forbidden': 4, 'add-untagged': 3.
               swL2VlanMultiplyAction 1.3.6.1.4.1.171.11.63.6.2.23.2.5 integer read-write
Specifies the action for VLANs. other: no action. create: the VLANs specified by swL2VlanMultiplyVlanList would be created at a time. configure: the VLANs specified by swL2VlanMultiplyVlanList would be configured at a time. delete: the VLANs specified by swL2VlanMultiplyVlanList would be deleted at a time. Enumeration: 'create': 2, 'other': 1, 'configure': 3, 'delete': 4.
     swL2DhcpLocalRelayMgmt 1.3.6.1.4.1.171.11.63.6.2.24
           swL2DhcpLocalRelayState 1.3.6.1.4.1.171.11.63.6.2.24.1 integer read-write
This object indicates the status of the DHCP local relay function of the switch. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
           swL2DhcpLocalRelayVLANTable 1.3.6.1.4.1.171.11.63.6.2.24.2 no-access
This table is used to manage the DHCP local relay status for each VLAN.
               swL2DhcpLocalRelayVLANEntry 1.3.6.1.4.1.171.11.63.6.2.24.2.1 no-access
This object lists the current VLANs in the switch and their corresponding DHCP local relay status.
                   swL2DhcpLocalRelayVLANID 1.3.6.1.4.1.171.11.63.6.2.24.2.1.1 integer read-only
This object shows the VIDs of the current VLANS in the switch.
                   swL2DhcpLocalRelayVLANState 1.3.6.1.4.1.171.11.63.6.2.24.2.1.2 integer read-write
This object indicates the status of the DHCP relay function of the VLAN. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     swL2FloodMAC 1.3.6.1.4.1.171.11.63.6.2.25
           swL2FloodMACMgmt 1.3.6.1.4.1.171.11.63.6.2.25.1
               swL2FloodMACGlobalSettings 1.3.6.1.4.1.171.11.63.6.2.25.1.1
                   swL2FloodMACState 1.3.6.1.4.1.171.11.63.6.2.25.1.1.1 integer read-write
This object indicates the status of Flooding MAC function. Enumeration: 'disabled': 2, 'enabled': 1.
                   swL2FloodMACLogState 1.3.6.1.4.1.171.11.63.6.2.25.1.1.2 integer read-write
This object indicates whether logs are generated when a flooding MAC is detected. Enumeration: 'disabled': 2, 'enabled': 1.
                   swL2FloodMACTrapState 1.3.6.1.4.1.171.11.63.6.2.25.1.1.3 integer read-write
This object indicates whether traps are generated when a flooding MAC is detected. Enumeration: 'disabled': 2, 'enabled': 1.
                   swL2FloodMACClearFDB 1.3.6.1.4.1.171.11.63.6.2.25.1.1.4 integer read-write
When set to start(2), this object will clear the entries of swL2FloodMACFDBTable. After the device finishes clearing the entries, it will return to its default value, no-action(1). Setting this object to no-action(1) will not have any effect. Enumeration: 'start': 2, 'no-action': 1.
               swL2FloodMACAutoFDBCtrlTable 1.3.6.1.4.1.171.11.63.6.2.25.1.2 no-access
A table containing a list of configured IP addresses to which the Auto FDB function will discover the corresponding VLAN, MAC address and port and have a corresponding static FDB entry created automatically.
                   swL2FloodMACAutoFDBCtrlEntry 1.3.6.1.4.1.171.11.63.6.2.25.1.2.1 no-access
Information containing the configured Auto FDB IP address.
                       swL2FloodMACAutoFDBIPAddress 1.3.6.1.4.1.171.11.63.6.2.25.1.2.1.1 ipaddress no-access
The Auto FDB IP address.
                       swL2FloodMACAutoFDBRowStatus 1.3.6.1.4.1.171.11.63.6.2.25.1.2.1.2 rowstatus read-only
This object indicates the status of this entry.
           swL2FloodMACInfo 1.3.6.1.4.1.171.11.63.6.2.25.2
               swL2FloodMACFDBTable 1.3.6.1.4.1.171.11.63.6.2.25.2.1 no-access
A table containing a list of current and historical flooding MAC entries.
                   swL2FloodMACFDBEntry 1.3.6.1.4.1.171.11.63.6.2.25.2.1.1 no-access
Information containing the flooding MAC address.
                       swL2FloodMACFDBIndex 1.3.6.1.4.1.171.11.63.6.2.25.2.1.1.1 integer no-access
The hardware address table index of the flooding MAC entry.
                       swL2FloodMACFDBVID 1.3.6.1.4.1.171.11.63.6.2.25.2.1.1.2 integer no-access
The VLAN identifier of the flooding MAC entry.
                       swL2FloodMACFDBMacAddress 1.3.6.1.4.1.171.11.63.6.2.25.2.1.1.3 macaddress no-access
The MAC address of the flooding MAC entry.
                       swL2FloodMACFDBStatus 1.3.6.1.4.1.171.11.63.6.2.25.2.1.1.4 integer read-only
The status of the flooding MAC entry. When the value is 'active', this means the entry is currently present in the hardware address table, otherwise, the value is 'inactive'. Enumeration: 'active': 1, 'inactive': 2.
                       swL2FloodMACFDBTimestamp 1.3.6.1.4.1.171.11.63.6.2.25.2.1.1.5 integer read-only
A number that correlates to a relative time the entry was detected by the Flooding MAC function.
               swL2FloodMACAutoFDBTable 1.3.6.1.4.1.171.11.63.6.2.25.2.2 no-access
A table containing the discovered VLAN, MAC address and port of the host with an IP address created in swL2FloodMACAutoFDBCtrlTable.
                   swL2FloodMACAutoFDBEntry 1.3.6.1.4.1.171.11.63.6.2.25.2.2.1 no-access
Information containing the discovered VLAN, MAC address and port of an Auto FDB entry.
                       swL2FloodMACAutoFDBVID 1.3.6.1.4.1.171.11.63.6.2.25.2.2.1.1 integer read-only
The VLAN identifier of Auto FDB entry.
                       swL2FloodMACAutoFDBMacAddress 1.3.6.1.4.1.171.11.63.6.2.25.2.2.1.2 macaddress read-only
The MAC address of the Auto FDB entry.
                       swL2FloodMACAutoFDBPort 1.3.6.1.4.1.171.11.63.6.2.25.2.2.1.3 integer read-only
The port number of the Auto FDB entry.
                       swL2FloodMACAutoFDBTimestamp 1.3.6.1.4.1.171.11.63.6.2.25.2.2.1.4 integer read-only
A number that represents the relative time when the Auto FDB learned this entry.