DDN-WOS-MIB: View SNMP OID List / Download MIB

VENDOR: DATADIRECT NETWORKS


 Home MIB: DDN-WOS-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 datadirect 1.3.6.1.4.1.6894
           wos 1.3.6.1.4.1.6894.4
               wosMIB 1.3.6.1.4.1.6894.4.1
SMI v2 MIB module for WOS (Web Object Scalar).
                   wosNotifications 1.3.6.1.4.1.6894.4.1.0
                       wosTrapMessage 1.3.6.1.4.1.6894.4.1.0.1
This notification is sent whenever a cluster alert is generated.
                   wosObjects 1.3.6.1.4.1.6894.4.1.1
                       wosNotificationInfo 1.3.6.1.4.1.6894.4.1.1.1
                           wosTrapDesc 1.3.6.1.4.1.6894.4.1.1.1.1 displaystring no-access
Description of the notification.
                           wosTrapSeverity 1.3.6.1.4.1.6894.4.1.1.1.2 wosseveritylevel no-access
Severity of the notification. emergency: A panic condition - notify all tech staff on call. alert: Should be corrected immediately - notify staff who can fix the problem - e.g. drive down alert. critical: Should be corrected immediately. Indicates failure in a primary system - fix CRITICAL problems before ALERT error: Non-urgent failures - these should be relayed to developers or admins - each item must be resolved within a given time. warning: Warning messages - not an error, but indication that an error will occur if action is not taken - e.g. cluster capacity is 70% used - each item must be resolved within a given time. notice: Events that are unusual but not error conditions - might be summarized in an email to developers or admins to spot potential problems - no immediate action required. informational: Normal operational messages - may be harvested for reporting, measuring throughput, etc - no action required. debug: Info useful to developers for debugging the application - not useful during operations.
                           wosTrapType 1.3.6.1.4.1.6894.4.1.1.1.3 displaystring no-access
Identifies the type of the notification.
                           wosTrapLocation 1.3.6.1.4.1.6894.4.1.1.1.4 displaystring no-access
A location pertaining to the notification (node IP address, cluster name, zone name, etc.)
                       wosStatsInfo 1.3.6.1.4.1.6894.4.1.1.2
                           wosStatsFRPS 1.3.6.1.4.1.6894.4.1.1.2.1 gauge32 read-only
Object read rate in file reads per second.
                           wosStatsFWPS 1.3.6.1.4.1.6894.4.1.1.2.2 gauge32 read-only
Object write rate in file writes per second.
                           wosStatsFDPS 1.3.6.1.4.1.6894.4.1.1.2.3 gauge32 read-only
Object delete rate in file deletes per second.
                           wosStatsReadLatency 1.3.6.1.4.1.6894.4.1.1.2.4 gauge32 read-only
Object read latency in milliseconds.
                           wosStatsWriteLatency 1.3.6.1.4.1.6894.4.1.1.2.5 gauge32 read-only
Object write latency in milliseconds.
                           wosStatsDeleteLatency 1.3.6.1.4.1.6894.4.1.1.2.6 gauge32 read-only
Object delete latency in milliseconds.
                           wosStatsReadThroughput 1.3.6.1.4.1.6894.4.1.1.2.7 gauge32 read-only
Object read throughput.
                           wosStatsWriteThroughput 1.3.6.1.4.1.6894.4.1.1.2.8 gauge32 read-only
Object write throughput.
                           wosStatsReadCount 1.3.6.1.4.1.6894.4.1.1.2.9 counter64 read-only
Total number of read transactions since the last cluster restart.
                           wosStatsWriteCount 1.3.6.1.4.1.6894.4.1.1.2.10 counter64 read-only
Total number of write transactions since the last cluster restart.
                           wosStatsDeleteCount 1.3.6.1.4.1.6894.4.1.1.2.11 counter64 read-only
Total number of delete transactions since the last cluster restart.
                       wosAlertsInfo 1.3.6.1.4.1.6894.4.1.1.3
                           wosAlertTable 1.3.6.1.4.1.6894.4.1.1.3.1 no-access
Table containing cluster alerts.
                               wosAlertEntry 1.3.6.1.4.1.6894.4.1.1.3.1.1 no-access
An entry in wosAlertTable.
                                   wosAlertIndex 1.3.6.1.4.1.6894.4.1.1.3.1.1.1 unsigned32 no-access
Alert table index. The most recent alert is assigned starting at index 1, and older alerts are assigned indices in ascending order.
                                   wosAlertSeverity 1.3.6.1.4.1.6894.4.1.1.3.1.1.2 wosseveritylevel read-only
Severity of the alert. emergency: A panic condition - notify all tech staff on call. alert: Should be corrected immediately - notify staff who can fix the problem - e.g. drive down alert. critical: Should be corrected immediately. Indicates failure in a primary system - fix CRITICAL problems before ALERT error: Non-urgent failures - these should be relayed to developers or admins - each item must be resolved within a given time. warning: Warning messages - not an error, but indication that an error will occur if action is not taken - e.g. cluster capacity is 70% used - each item must be resolved within a given time. notice: Events that are unusual but not error conditions - might be summarized in an email to developers or admins to spot potential problems - no immediate action required. informational: Normal operational messages - may be harvested for reporting, measuring throughput, etc - no action required. debug: Info useful to developers for debugging the application - not useful during operations.
                                   wosAlertTime 1.3.6.1.4.1.6894.4.1.1.3.1.1.3 dateandtime read-only
Date and time the alert was generated.
                                   wosAlertType 1.3.6.1.4.1.6894.4.1.1.3.1.1.4 displaystring read-only
Identifies the type of the alert.
                                   wosAlertLocation 1.3.6.1.4.1.6894.4.1.1.3.1.1.5 displaystring read-only
A location pertaining to the alert (node IP address, cluster name, zone name, etc.)
                                   wosAlertDesc 1.3.6.1.4.1.6894.4.1.1.3.1.1.6 displaystring read-only
Description of the alert.
                       wosClusterInfo 1.3.6.1.4.1.6894.4.1.1.4
                           wosClusterName 1.3.6.1.4.1.6894.4.1.1.4.1 displaystring read-only
The name of the cluster.
                           wosClusterId 1.3.6.1.4.1.6894.4.1.1.4.2 displaystring read-only
The ID number of the cluster.
                           wosClusterStatus 1.3.6.1.4.1.6894.4.1.1.4.3 displaystring read-only
The cluster status.
                           wosClusterPrimaryNodeAddressType 1.3.6.1.4.1.6894.4.1.1.4.4 inetaddresstype read-only
The IP address type of the primary cluster node.
                           wosClusterPrimaryNodeAddress 1.3.6.1.4.1.6894.4.1.1.4.5 inetaddress read-only
The IP address of the cluster primary node. Refer to wosClusterPrimaryNodeAddress to determine the address type.
                           wosClusterTotalNodeCount 1.3.6.1.4.1.6894.4.1.1.4.6 unsigned32 read-only
The total number of nodes in the cluster.
                           wosClusterActiveNodeCount 1.3.6.1.4.1.6894.4.1.1.4.7 unsigned32 read-only
The number of nodes in the cluster that are active.
                           wosClusterDisconnectedNodeCount 1.3.6.1.4.1.6894.4.1.1.4.8 unsigned32 read-only
Then number of nodes in the cluster that are disconnected.
                           wosClusterConnectedClientsCount 1.3.6.1.4.1.6894.4.1.1.4.9 unsigned32 read-only
The number of active client connections to the cluster.
                           wosClusterObjectCountLow 1.3.6.1.4.1.6894.4.1.1.4.10 unsigned32 read-only
The total number of objects stored in the cluster. Together with wosClusterObjectCountHigh this composes a 64-bit number.
                           wosClusterObjectCountHigh 1.3.6.1.4.1.6894.4.1.1.4.11 unsigned32 read-only
The total number of objects stored in the cluster. Together with wosClusterObjectCountLow this composes a 64-bit number.
                           wosClusterUsableCapacity 1.3.6.1.4.1.6894.4.1.1.4.12 unsigned32 read-only
The usable capacity of the cluster.
                           wosClusterUsedCapacity 1.3.6.1.4.1.6894.4.1.1.4.13 unsigned32 read-only
The used capacity of the cluster.
                           wosClusterFreeCapacity 1.3.6.1.4.1.6894.4.1.1.4.14 unsigned32 read-only
Total free capacity of the cluster.
                       wosZonesInfo 1.3.6.1.4.1.6894.4.1.1.5
                           wosZoneTable 1.3.6.1.4.1.6894.4.1.1.5.1 no-access
Table containing cluster zones.
                               wosZoneEntry 1.3.6.1.4.1.6894.4.1.1.5.1.1 no-access
An entry in wosZoneTable.
                                   wosZoneId 1.3.6.1.4.1.6894.4.1.1.5.1.1.1 unsigned32 no-access
An integer that uniquely identifies the zone in the cluster and is the index value for wosZoneTable entries.
                                   wosZoneName 1.3.6.1.4.1.6894.4.1.1.5.1.1.2 displaystring read-only
The name of the zone.
                                   wosZoneNodeCount 1.3.6.1.4.1.6894.4.1.1.5.1.1.3 unsigned32 read-only
The number of nodes accepted into the zone.
                       wosNodesInfo 1.3.6.1.4.1.6894.4.1.1.6
                           wosNodeTable 1.3.6.1.4.1.6894.4.1.1.6.1 no-access
Table containing cluster nodes.
                               wosNodeEntry 1.3.6.1.4.1.6894.4.1.1.6.1.1 no-access
An entry in wosNodeTable.
                                   wosNodeIndex 1.3.6.1.4.1.6894.4.1.1.6.1.1.1 unsigned32 no-access
An arbitrary integer used as the index value for wosNodeTable entries. The index value can change at any time.
                                   wosNodeName 1.3.6.1.4.1.6894.4.1.1.6.1.1.2 displaystring read-only
The node name.
                                   wosNodeAddressType 1.3.6.1.4.1.6894.4.1.1.6.1.1.3 inetaddresstype read-only
The IP address type of the node.
                                   wosNodeAddress 1.3.6.1.4.1.6894.4.1.1.6.1.1.4 inetaddress read-only
The IP address of the node. Refer to wosNodeAddressType to determine the address type.
                                   wosNodeZoneName 1.3.6.1.4.1.6894.4.1.1.6.1.1.5 displaystring read-only
The name of the zone that the node belongs to.
                                   wosNodeStatus 1.3.6.1.4.1.6894.4.1.1.6.1.1.6 displaystring read-only
The status of the node (e.g. active, connecting, etc.).
                                   wosNodeFwVersion 1.3.6.1.4.1.6894.4.1.1.6.1.1.7 displaystring read-only
The version number of the node's firmware.
                                   wosNodeObjectCountLow 1.3.6.1.4.1.6894.4.1.1.6.1.1.8 unsigned32 read-only
The total number of objects stored on the node. Together with wosNodeObjectCountHigh this composes a 64-bit number.
                                   wosNodeObjectCountHigh 1.3.6.1.4.1.6894.4.1.1.6.1.1.9 unsigned32 read-only
The total number of objects stored on the node. Together with wosNodeObjectCountLow this composes a 64-bit number.
                                   wosNodeTotalCapacity 1.3.6.1.4.1.6894.4.1.1.6.1.1.10 unsigned32 read-only
The total capacity of the node.
                                   wosNodeUsedCapacity 1.3.6.1.4.1.6894.4.1.1.6.1.1.11 unsigned32 read-only
The used capacity of the node.
                                   wosNodePercentFull 1.3.6.1.4.1.6894.4.1.1.6.1.1.12 gauge32 read-only
The used capacity of the node as a percentage of the total capacity.
                           wosPendingNodeTable 1.3.6.1.4.1.6894.4.1.1.6.2 no-access
Table containing pending nodes.
                               wosPendingNodeEntry 1.3.6.1.4.1.6894.4.1.1.6.2.1 no-access
An entry in wosPendingNodeTable.
                                   wosPendingNodeIndex 1.3.6.1.4.1.6894.4.1.1.6.2.1.1 unsigned32 no-access
An arbitrary integer used as the index value for wosPendingNodeTable entries. The index value can change at any time.
                                   wosPendingNodeAddressType 1.3.6.1.4.1.6894.4.1.1.6.2.1.2 inetaddresstype read-only
The IP address type of the pending node.
                                   wosPendingNodeAddress 1.3.6.1.4.1.6894.4.1.1.6.2.1.3 inetaddress read-only
The IP address of the pending node. Refer to wosPendingNodeAddressType to determine the address type.
                                   wosPendingNodeStatus 1.3.6.1.4.1.6894.4.1.1.6.2.1.4 displaystring read-only
The status of the pending node (e.g. pending, pending (upgrading), etc.).
                           wosNodeDriveTable 1.3.6.1.4.1.6894.4.1.1.6.3 no-access
Table containing details about a node's disk drives.
                               wosNodeDriveEntry 1.3.6.1.4.1.6894.4.1.1.6.3.1 no-access
An entry in wosNodeDriveTable.
                                   wosNodeDriveSlotNbr 1.3.6.1.4.1.6894.4.1.1.6.3.1.1 unsigned32 no-access
The slot number of the node that the drive is installed in.
                                   wosNodeDriveNodeName 1.3.6.1.4.1.6894.4.1.1.6.3.1.2 displaystring read-only
The name of the node that the drive is installed in.
                                   wosNodeDriveMfgr 1.3.6.1.4.1.6894.4.1.1.6.3.1.3 displaystring read-only
The drive manufacturer.
                                   wosNodeDriveModel 1.3.6.1.4.1.6894.4.1.1.6.3.1.4 displaystring read-only
The drive model number.
                                   wosNodeDriveSerialNbr 1.3.6.1.4.1.6894.4.1.1.6.3.1.5 displaystring read-only
The drive serial number.
                                   wosNodeDriveStatus 1.3.6.1.4.1.6894.4.1.1.6.3.1.6 displaystring read-only
The status of the drive (e.g. down, not present, etc.).
                                   wosNodeDriveCapacity 1.3.6.1.4.1.6894.4.1.1.6.3.1.7 unsigned32 read-only
The total capacity of the drive.
                       wosPoliciesInfo 1.3.6.1.4.1.6894.4.1.1.7
                           wosPolicyTable 1.3.6.1.4.1.6894.4.1.1.7.1 no-access
Table containing policies.
                               wosPolicyEntry 1.3.6.1.4.1.6894.4.1.1.7.1.1 no-access
An entry in wosPolicyTable.
                                   wosPolicyIndex 1.3.6.1.4.1.6894.4.1.1.7.1.1.1 unsigned32 no-access
An arbitrary integer used as an index value for wosPolicyTable entries. The index value can change at any time.
                                   wosPolicyReplicaIndex 1.3.6.1.4.1.6894.4.1.1.7.1.1.2 unsigned32 no-access
An integer used as an index value for a zone replica in wosPolicyTable entries. The first zone replica in a policy is assigned starting at index 1 and the remaining zone replicas are assigned indices in ascending order.
                                   wosPolicyId 1.3.6.1.4.1.6894.4.1.1.7.1.1.3 displaystring read-only
The ID number of the policy.
                                   wosPolicyName 1.3.6.1.4.1.6894.4.1.1.7.1.1.4 displaystring read-only
The name of the policy.
                                   wosPolicyReplicaZoneName 1.3.6.1.4.1.6894.4.1.1.7.1.1.5 displaystring read-only
The name of the zone containing replicas for the policy.
                                   wosPolicyReplicaCount 1.3.6.1.4.1.6894.4.1.1.7.1.1.6 unsigned32 read-only
The number of replicas in the zone for the policy.
                                   wosPolicyReplicationType 1.3.6.1.4.1.6894.4.1.1.7.1.1.7 displaystring read-only
The replication type of the policy.
                                   wosPolicyLocalDataProtection 1.3.6.1.4.1.6894.4.1.1.7.1.1.8 truthvalue read-only
True if local data protection is enabled for the policy.
                                   wosPolicyObjCountLow 1.3.6.1.4.1.6894.4.1.1.7.1.1.9 unsigned32 read-only
The total number of objects stored against the policy. Together with wosPolicyObjCountHigh this composes a 64-bit number.
                                   wosPolicyObjCountHigh 1.3.6.1.4.1.6894.4.1.1.7.1.1.10 unsigned32 read-only
The total number of objects stored against the policy. Together with wosPolicyObjCountLow this composes a 64-bit number.
                                   wosPolicyNonComplObjCountLow 1.3.6.1.4.1.6894.4.1.1.7.1.1.11 unsigned32 read-only
The total number of non-compliant objects stored against the policy. Together with wosPolicyObjCountHigh this composes a 64-bit number.
                                   wosPolicyNonComplObjCountHigh 1.3.6.1.4.1.6894.4.1.1.7.1.1.12 unsigned32 read-only
The total number of non-compliant objects stored against the policy. Together with wosPolicyObjCountLow this composes a 64-bit number.
                                   wosPolicyUsedCapacity 1.3.6.1.4.1.6894.4.1.1.7.1.1.13 unsigned32 read-only
The total capacity used by the policy.
                       wosPrefsInfo 1.3.6.1.4.1.6894.4.1.1.8
                           wosPrefStoreUnderReplObjs 1.3.6.1.4.1.6894.4.1.1.8.1 truthvalue read-only
True if storage of under-replicated objects is allowed.
                           wosPrefNodeDownDelay 1.3.6.1.4.1.6894.4.1.1.8.2 unsigned32 read-only
The node down delay time.
                           wosPrefEmailAlertNewInterval 1.3.6.1.4.1.6894.4.1.1.8.3 unsigned32 read-only
The minimum delay time between notifications of new alerts.
                           wosPrefEmailAlertRmndrInterval 1.3.6.1.4.1.6894.4.1.1.8.4 unsigned32 read-only
The minimum delay time between reminders of existing alerts.
                           wosPrefEmailAlertFromAddr 1.3.6.1.4.1.6894.4.1.1.8.5 displaystring read-only
The From address for email alerts.
                           wosPrefEmailAlertRecipientTable 1.3.6.1.4.1.6894.4.1.1.8.6 no-access
Table containing email alert recipients.
                               wosPrefEmailAlertRecipientEntry 1.3.6.1.4.1.6894.4.1.1.8.6.1 no-access
An entry in wosPrefEmailAlertRecipientTable.
                                   wosPrefEmailAlertRecipientIndex 1.3.6.1.4.1.6894.4.1.1.8.6.1.1 unsigned32 no-access
Email alert table index.
                                   wosPrefEmailAlertRecipient 1.3.6.1.4.1.6894.4.1.1.8.6.1.2 displaystring read-only
The email alert recipient.
                           wosPrefEmailAlertServerTable 1.3.6.1.4.1.6894.4.1.1.8.7 no-access
Table containing outgoing email servers for email alerts.
                               wosPrefEmailAlertServerEntry 1.3.6.1.4.1.6894.4.1.1.8.7.1 no-access
An entry in wosPrefEmailAlertServerTable.
                                   wosPrefEmailAlertServerIndex 1.3.6.1.4.1.6894.4.1.1.8.7.1.1 unsigned32 no-access
Email alert server table index.
                                   wosPrefEmailAlertServer 1.3.6.1.4.1.6894.4.1.1.8.7.1.2 displaystring read-only
The outgoing email server for email alerts.
                           wosPrefSnmpManagerTable 1.3.6.1.4.1.6894.4.1.1.8.8 no-access
Table containing SNMP managers.
                               wosPrefSnmpManagerEntry 1.3.6.1.4.1.6894.4.1.1.8.8.1 no-access
An entry in wosPrefSnmpManagerTable.
                                   wosPrefSnmpManagerIndex 1.3.6.1.4.1.6894.4.1.1.8.8.1.1 unsigned32 no-access
SNMP Manager table index.
                                   wosPrefSnmpManager 1.3.6.1.4.1.6894.4.1.1.8.8.1.2 displaystring read-only
The SNMP manager.
                           wosPrefSnmpTrapCommunityName 1.3.6.1.4.1.6894.4.1.1.8.9 displaystring read-only
The community name for the SNMP traps.
                           wosPrefMgmtIpFilterTable 1.3.6.1.4.1.6894.4.1.1.8.10 no-access
Table containing management IP filters.
                                 wosPrefMgmtIpFilterEntry 1.3.6.1.4.1.6894.4.1.1.8.10.1 no-access
An entry in wosPrefMgmtIpFilterTable.
                                     wosPrefMgmtIpFilterIndex 1.3.6.1.4.1.6894.4.1.1.8.10.1.1 unsigned32 no-access
Management IP filter table index.
                                     wosPrefMgmtIpFilter 1.3.6.1.4.1.6894.4.1.1.8.10.1.2 displaystring read-only
The management IP filter.
                           wosPrefClientIpFilterTable 1.3.6.1.4.1.6894.4.1.1.8.11 no-access
Table containing client I/O IP filters.
                                 wosPrefClientIpFilterEntry 1.3.6.1.4.1.6894.4.1.1.8.11.1 no-access
An entry in wosPrefClientIpFilterTable.
                                     wosPrefClientIpFilterIndex 1.3.6.1.4.1.6894.4.1.1.8.11.1.1 unsigned32 no-access
Client I/O IP filter table index.
                                     wosPrefClientIpFilter 1.3.6.1.4.1.6894.4.1.1.8.11.1.2 displaystring read-only
The client I/O IP filter.
                           wosPrefSyslogFacility 1.3.6.1.4.1.6894.4.1.1.8.12 wossyslogfacility read-only
The Syslog Facility. user (1) - random user-level messages mail (2) - mail system daemon (3) - system daemons auth (4) - security/authorization messages syslog (5) - messages generated internally by syslogd lpr (6) - line printer subsystem news (7) - network news subsystem uucp (8) - UUCP subsystem cron (9) - clock daemon authpriv (10) - security/authorization messages (private) ftp (11) - ftp daemon local0 (16) - reserved for local use local1 (17) - reserved for local use local2 (18) - reserved for local use local3 (19) - reserved for local use local4 (20) - reserved for local use local5 (21) - reserved for local use local6 (22) - reserved for local use local7 (23) - reserved for local use
                           wosPrefSyslogRemoteHost 1.3.6.1.4.1.6894.4.1.1.8.13 displaystring read-only
The remote syslog host.
                   wosConformance 1.3.6.1.4.1.6894.4.1.2
                       wosCompliances 1.3.6.1.4.1.6894.4.1.2.1
                           wosCompliance 1.3.6.1.4.1.6894.4.1.2.1.1
The compliance statement for WOS nodes implementing the DDN-WOS-MIB.
                       wosGroups 1.3.6.1.4.1.6894.4.1.2.2
                           wosEventsGroup 1.3.6.1.4.1.6894.4.1.2.2.1
This groups defines the set of notification types.
                           wosNotificationsGroup 1.3.6.1.4.1.6894.4.1.2.2.2
This group defines the set of notification objects.
                           wosStatsGroup 1.3.6.1.4.1.6894.4.1.2.2.3
This group defines the set of statistics objects.
                           wosAlertsGroup 1.3.6.1.4.1.6894.4.1.2.2.4
This group defines the set of alert objects.
                           wosClusterGroup 1.3.6.1.4.1.6894.4.1.2.2.5
This group defines the set of cluster objects.
                           wosZonesGroup 1.3.6.1.4.1.6894.4.1.2.2.6
This group defines the set of zone objects.
                           wosNodesGroup 1.3.6.1.4.1.6894.4.1.2.2.7
This group defines the set of node objects.
                           wosPoliciesGroup 1.3.6.1.4.1.6894.4.1.2.2.8
This group defines the set of policy objects.
                           wosPrefsGroup 1.3.6.1.4.1.6894.4.1.2.2.9
This group defines the set of preferences objects.