DCP-OCH-MIB: View SNMP OID List / Download MIB

VENDOR: SMARTOPTICS AS


 Home MIB: DCP-OCH-MIB
Download as:   
SNMPv2-CONF, DCP-MIB, SNMPv2-SMI, SO-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dcpOch 1.3.6.1.4.1.30826.2.2.4
This is the enterprise specific DCP OCH MIB for Smartoptics
     dcpOchGeneral 1.3.6.1.4.1.30826.2.2.4.1
         dcpOchGeneralTable 1.3.6.1.4.1.30826.2.2.4.1.1 no-access
A table with general information about the och port.
             dcpOchGeneralEntry 1.3.6.1.4.1.30826.2.2.4.1.1.1 no-access
Description.
                 dcpOchGeneralIndex 1.3.6.1.4.1.30826.2.2.4.1.1.1.1 unsigned32 no-access
Port Index in the following format: ccspp where cc: chassis. s: slot number. pp: port number.
                 dcpOchGeneralPortName 1.3.6.1.4.1.30826.2.2.4.1.1.1.2 displaystring read-only
The port name in the following format: och-c/s/port where c = chassis, s = slot, port = port name or ocm-c/s where c = chassis, s = slot
                 dcpOchGeneralSpacing 1.3.6.1.4.1.30826.2.2.4.1.1.1.3 dcphundreds read-only
The channel spacing used in units of 0.01 GHz.
                 dcpOchGeneralMaxChannels 1.3.6.1.4.1.30826.2.2.4.1.1.1.4 unsigned32 read-only
The number of channels that is used for the optical power channel plan for the EDFA.
                 dcpOchGeneralActiveChannels 1.3.6.1.4.1.30826.2.2.4.1.1.1.5 unsigned32 read-only
The number of active channels currently in regulation.
                 dcpOchGeneralUtilization 1.3.6.1.4.1.30826.2.2.4.1.1.1.6 gauge32 read-only
The number of channels used in the system in units of %.
                 dcpOchGeneralConfiguredChannels 1.3.6.1.4.1.30826.2.2.4.1.1.1.7 unsigned32 read-only
The number of channels that are enabled.
     dcpOchObjects 1.3.6.1.4.1.30826.2.2.4.2
         dcpOchTable 1.3.6.1.4.1.30826.2.2.4.2.1 no-access
A table with all optical channels of the system.
             dcpOchEntry 1.3.6.1.4.1.30826.2.2.4.2.1.1 no-access
Description.
                 dcpOchIndex 1.3.6.1.4.1.30826.2.2.4.2.1.1.1 unsigned32 no-access
Och Index in the following format: cspoooy where c: chassis. s: slot number. p: port number. ooo: Och number. y: 0 = tx+rx port, 1 = tx port, 2 = rx port. Same Index is used in the IF-MIB.
                 dcpOchChannelId 1.3.6.1.4.1.30826.2.2.4.2.1.1.2 displaystring read-only
The optical channel id name in the following format: och-c/s/p/och where c = chassis. s = slot number. port = edfa or eq. och = optical channel.
                 dcpOchRxPower 1.3.6.1.4.1.30826.2.2.4.2.1.1.3 dcptenths read-only
The optical input power for the optical channel in units of 0.1 dBm.
                 dcpOchTxPower 1.3.6.1.4.1.30826.2.2.4.2.1.1.4 dcptenths read-only
The optical output power for the optical channel in units of 0.1 dBm.
                 dcpOchWssAttenuation 1.3.6.1.4.1.30826.2.2.4.2.1.1.5 dcptenths read-only
The WSS attenuation for the optical channel in units of 0.1 dB.
                 dcpOchWssInsertionLoss 1.3.6.1.4.1.30826.2.2.4.2.1.1.6 dcptenths read-only
The calibration value of WSS insertion loss in units of 0.1 dBm.
                 dcpOchWantedOutputPower 1.3.6.1.4.1.30826.2.2.4.2.1.1.7 dcptenths read-only
The wanted optical output power for the optical channel in units of 0.1 dBm.
                 dcpOchPortMode 1.3.6.1.4.1.30826.2.2.4.2.1.1.8 ochportmode read-only
The port mode for the channel. Port mode can be on or off. off - The channel is disabled. on - The channel is enabled. edfa - The channel is enabled and connected to the edfa port. express - The channel is enabled and connected to the express port.
                 dcpOchStatus 1.3.6.1.4.1.30826.2.2.4.2.1.1.9 interfacestatus read-only
The operational state for a channel. idle - The optical channel is not activated. down - The optical channel traffic is lost. up - There is traffic on the optical channel.
                 dcpOchDescription 1.3.6.1.4.1.30826.2.2.4.2.1.1.10 displaystring read-only
User configurable description string for the optical channel.
                 dcpOchAlarm 1.3.6.1.4.1.30826.2.2.4.2.1.1.11 ituperceivedseverity read-only
The highest alarm severity of the optical channel.
     dcpOchMIBCompliance 1.3.6.1.4.1.30826.2.2.4.3
         dcpOchMIBGroups 1.3.6.1.4.1.30826.2.2.4.3.1
             dcpOchGeneralTableGroupV1 1.3.6.1.4.1.30826.2.2.4.3.1.1
The och general table objects V1.
             dcpOchTableGroupV1 1.3.6.1.4.1.30826.2.2.4.3.1.2
The och table objects V1.
         dcpOchMIBCompliances 1.3.6.1.4.1.30826.2.2.4.3.2
             dcpOchBasicComplV1 1.3.6.1.4.1.30826.2.2.4.3.2.1
Basic implementation requirements for the DCP-OCH-MIB V1.