DCP-LINKVIEW-MIB: View SNMP OID List / Download MIB

VENDOR: SMARTOPTICS AS


 Home MIB: DCP-LINKVIEW-MIB
Download as:   
SNMPv2-CONF, DCP-MIB, SNMPv2-SMI, SO-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dcpLinkview 1.3.6.1.4.1.30826.2.2.3
This is the enterprise specific DCP LINKVIEW MIB for Smartoptics
     dcpLinkviewObjects 1.3.6.1.4.1.30826.2.2.3.1
         dcpLinkviewTable 1.3.6.1.4.1.30826.2.2.3.1.1 no-access
Description.
             dcpLinkviewEntry 1.3.6.1.4.1.30826.2.2.3.1.1.1 no-access
Description.
                 dcpLinkviewIndex 1.3.6.1.4.1.30826.2.2.3.1.1.1.1 unsigned32 no-access
Interface Index in the following format: csiixy where c: chassis. s: slot number. ii: Interface number. x: 1 = line, 2 = client. y: 0 = tx+rx port, 1 = tx port, 2 = rx port. For DCP-M products Slot is always 0. Same Index is used in the IF-MIB.
                 dcpLinkviewLocalHostname 1.3.6.1.4.1.30826.2.2.3.1.1.1.2 displaystring read-only
The hostname of the local system.
                 dcpLinkviewLocalName 1.3.6.1.4.1.30826.2.2.3.1.1.1.3 displaystring read-only
The local interface name. If no interface this value is empty. if-c/channelid-direction where c = chassis and direction = rx or tx.
                 dcpLinkviewLocalStatus 1.3.6.1.4.1.30826.2.2.3.1.1.1.4 interfacestatus read-only
The operational state of the local port. idle - The port is not activated. down - The port traffic is lost. up - There is traffic on the port.
                 dcpLinkviewLocalPower 1.3.6.1.4.1.30826.2.2.3.1.1.1.5 opticalpower1decimal read-only
The optical power present at the line interface, all wavelengths combined in units of 0.1 dBm.
                 dcpLinkviewFiberLoss 1.3.6.1.4.1.30826.2.2.3.1.1.1.6 dcpfiberloss read-only
The fiber loss in units of 0.1 dB.
                 dcpLinkviewFiberAttenuation 1.3.6.1.4.1.30826.2.2.3.1.1.1.7 dcpfiberattenuation read-only
The fiber attenuation in units of 0.01 dB/km.
                 dcpLinkviewFiberLength 1.3.6.1.4.1.30826.2.2.3.1.1.1.8 dcpfiberlength read-only
The fiber length in units of 0.1 km.
                 dcpLinkviewFiberDispersion 1.3.6.1.4.1.30826.2.2.3.1.1.1.9 unsigned32 read-only
The calculated dispersion based on the measured fiber length in units of 1 ps/nm.
                 dcpLinkviewFiberType 1.3.6.1.4.1.30826.2.2.3.1.1.1.10 displaystring read-only
The fiber type configured, currently only G.652 is supported.
                 dcpLinkviewFiberDispComp 1.3.6.1.4.1.30826.2.2.3.1.1.1.11 integer32 read-only
The compensated dispersion value by the system in units of 1 ps/nm.
                 dcpLinkviewFiberDispFinal 1.3.6.1.4.1.30826.2.2.3.1.1.1.12 integer32 read-only
Residiual(remaning) dispersion in units of 1 ps/nm.
                 dcpLinkviewFiberUtilization 1.3.6.1.4.1.30826.2.2.3.1.1.1.13 gauge32 read-only
Wavelength utilization of the system in units of %.
                 dcpLinkviewRemotePower 1.3.6.1.4.1.30826.2.2.3.1.1.1.14 opticalpower1decimal read-only
The optical power of the remote interface in units of 0.1 dBm.
                 dcpLinkviewRemoteName 1.3.6.1.4.1.30826.2.2.3.1.1.1.15 displaystring read-only
The remote interface name. If no interface this value is empty. if-c/channelid-direction where c = chassis and direction = rx or tx.
                 dcpLinkviewRemoteHostname 1.3.6.1.4.1.30826.2.2.3.1.1.1.16 displaystring read-only
The hostname of the remote system.
     dcpLinkviewMIBCompliance 1.3.6.1.4.1.30826.2.2.3.2
         dcpLinkviewMIBGroups 1.3.6.1.4.1.30826.2.2.3.2.1
             dcpLinkviewTableGroupV1 1.3.6.1.4.1.30826.2.2.3.2.1.1
The interface table objects V1.
         dcpLinkviewMIBCompliances 1.3.6.1.4.1.30826.2.2.3.2.2
             dcpLinkviewBasicComplV1 1.3.6.1.4.1.30826.2.2.3.2.2.1
Basic implementation requirements for the DCP-INTERFACE-MIB V1.