DCN-MIB: View SNMP OID List / Download MIB

VENDOR: DIGITAL CHINA (SHANGHAI) NETWORKS LTD.


 Home MIB: DCN-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dcn 1.3.6.1.4.1.6339
           os 1.3.6.1.4.1.6339.100
                   priSystem 1.3.6.1.4.1.6339.100.1
                       sysResetUnit 1.3.6.1.4.1.6339.100.1.1 integer read-write
setfactory(2) warmReset(3) noReset(1) default the status is 1 Enumeration: 'setfactory': 2, 'warmReset': 3, 'noReset': 1.
                       sysHardwareVersion 1.3.6.1.4.1.6339.100.1.2 displaystring read-only
The version information of switch hardware
                       sysSoftwareVersion 1.3.6.1.4.1.6339.100.1.3 displaystring read-only
The version information of switch software
                       sysStackFlag 1.3.6.1.4.1.6339.100.1.4 integer read-only
If it is the status of stacking Enumeration: 'noStack': 2, 'stack': 1.
                       sysCPUMac 1.3.6.1.4.1.6339.100.1.5 macaddress read-only
The MAC Address of the switch's CPU
                       sysWriteConfig 1.3.6.1.4.1.6339.100.1.6 integer read-write
write(1)save the current configuration Enumeration: 'write': 1.
                       sysPowerStateTable 1.3.6.1.4.1.6339.100.1.7 no-access
the power supply status is only used for chassis switch
                           sysPowerStateEntry 1.3.6.1.4.1.6339.100.1.7.1 no-access
power supply status
                               sysPowerSlotIndex 1.3.6.1.4.1.6339.100.1.7.1.1 integer no-access
Module model No.
                               sysPowerState 1.3.6.1.4.1.6339.100.1.7.1.2 integer read-only
if the power supply insert Enumeration: 'sysPowerInstalled': 1, 'sysPowerNotInstalled': 0.
                               sysPowerValue 1.3.6.1.4.1.6339.100.1.7.1.3 integer read-only
Power Value
                               sysPowerType 1.3.6.1.4.1.6339.100.1.7.1.4 integer read-only
Power Type Enumeration: 'poePower': 1, 'systemPower': 0.
                               sysPowerStatus 1.3.6.1.4.1.6339.100.1.7.1.5 integer read-only
Power Status Enumeration: 'na': 2, 'abnormal': 1, 'normal': 0.
                       sysSlotTable 1.3.6.1.4.1.6339.100.1.8 no-access
machine information,it is only used by chassis.
                           sysSlotEntry 1.3.6.1.4.1.6339.100.1.8.1 no-access
Switch information
                               sysSlotIndex 1.3.6.1.4.1.6339.100.1.8.1.1 integer no-access
Module Model No.
                               sysCPUType 1.3.6.1.4.1.6339.100.1.8.1.2 displaystring read-only
CPU type
                               sysCPUFiveSecondIdle 1.3.6.1.4.1.6339.100.1.8.1.3 integer read-only
Last 5 second CPU IDLE
                               sysCPUThirtySecondIdle 1.3.6.1.4.1.6339.100.1.8.1.4 integer read-only
Last 30 second CPU IDLE
                               sysCPUFiveMinuteIdle 1.3.6.1.4.1.6339.100.1.8.1.5 integer read-only
Last 5 minute CPU IDLE
                               sysCPUIdle 1.3.6.1.4.1.6339.100.1.8.1.6 integer read-only
From running CPU IDLE
                               sysMemorySize 1.3.6.1.4.1.6339.100.1.8.1.7 integer read-only
memory size
                               sysMemoryBusy 1.3.6.1.4.1.6339.100.1.8.1.8 integer read-only
memory usage rent
                               sysFlashSize 1.3.6.1.4.1.6339.100.1.8.1.9 integer read-only
The flash capacity of this slot.
                               sysTemperature 1.3.6.1.4.1.6339.100.1.8.1.10 integer read-only
The Temperature of this slot.80 is 80centigrade
                               sysCpuUsage 1.3.6.1.4.1.6339.100.1.8.1.11 integer read-only
The CPU usage of this slot.
                               sysMemoryUsage 1.3.6.1.4.1.6339.100.1.8.1.12 integer read-only
The memory usage of this slot.
                       switchInfoTable 1.3.6.1.4.1.6339.100.1.9 no-access
Table of descriptive and status information about switches in this system.
                           switchInfoEntry 1.3.6.1.4.1.6339.100.1.9.1 no-access
An entry in the table, containing information about a single switch in this system.
                               swSlotIndex 1.3.6.1.4.1.6339.100.1.9.1.1 integer read-only
This object identifies the slot within the switch for which this entry contains information. While for the chassis device, the value is real switch slot number.
                               swUnitIndex 1.3.6.1.4.1.6339.100.1.9.1.2 integer read-only
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
                               swModuleType 1.3.6.1.4.1.6339.100.1.9.1.3 integer read-only
Type of expansion module in this switch slot. Enumeration: 'type2-NEWMI': 202, 'type1-M8GB': 118, 'type5-M16K-16Q': 321, 'type1-L-M4GX24TX': 122, 'type1-16FX': 111, 'type1-24GB12GT': 137, 'type2-4GX24TX': 185, 'type1-4GX24TX': 121, 'type2-110Gx': 168, 'type1-M4GX24TX': 113, 'type2-M8GB': 182, 'type5-M16K-FC': 322, 'type1-12GX12GTR4': 140, 'type1-M44GT': 131, 'type5-M16K-24T24S2XS': 324, 'type3-8XFP': 235, 'type1-4XFP': 129, 'type1-MII': 116, 'type2-2XFP8GX16GB': 183, 'type1-E-2XFP24GB12GT': 143, 'type3-MII': 230, 'type1-12GB': 117, 'type2-M1XFP12GX12GT': 192, 'type2-ES2GB': 176, 'type2-M1XFP12GX12GB': 196, 'type2-12GX12GTR4': 204, 'type1-12GT': 102, 'type3-M': 228, 'typeMFC': 0, 'type2-8GX16GB': 184, 'type2-E-2XFP24GB12GT': 207, 'type3-08BACKPLANE': 239, 'type2-12GT': 166, 'type2-16FX': 175, 'type5-M16K-SUP': 320, 'type2-MI': 179, 'type1GL': 3, 'type1GS': 2, 'type2-12GB': 181, 'type1-1XFP8GX16GB': 123, 'type3-24GT-V': 236, 'type2-24GB12GT': 201, 'type1-4GX32TX': 110, 'type8QSFP': 145, 'type2-12GX12GT': 189, 'type10M100MT': 8, 'type1-8GX16GB': 120, 'type1-M1XFP12GX12GB': 132, 'type2-12GX12GB': 197, 'type1-M1XFP12GX12GT': 128, 'type2-1XFP8GX16GB': 187, 'type1-NEWMI': 138, 'type1-12GX12GT': 125, 'type2-2XFP12GX12GB': 198, 'type1-1XFP12GX12GT': 126, 'type1-12GX12GB': 133, 'type2-2XFP12GX12GT': 188, 'type2-4XFP': 193, 'type100M1GT': 4, 'type1-110Gx': 104, 'type3-4XFP': 234, 'type2-24GT': 172, 'type2-1XFP12GX12GT': 190, 'type1-E-24GB12GT': 142, 'type4-2GB': 302, 'type2-24GB': 171, 'type1-210Gx': 103, 'type1-2XFP24GB12GT': 136, 'type2-M44GT': 195, 'typeSFC': 1, 'type4-4TX': 303, 'type2-2XFP24GB12GT': 200, 'type1-24GT': 108, 'type2-CPU8245': 169, 'type2-4GX32TX': 174, 'type1-BACKPLANE': 106, 'type2-210Gx': 167, 'type1-24GB': 107, 'type2-ES': 178, 'type1-M1XFP12GX12GTR4': 139, 'type2-L-M4GX24TX': 186, 'type2-MII': 180, 'type2-M4GX24TX': 177, 'type3-24GB-V': 237, 'type1-2XFP8GX16GB': 119, 'type2-48GT': 191, 'type3-24GT': 231, 'type2-48GB': 194, 'type3-24GB': 232, 'type4-4FB': 305, 'type5-M16K-48XS2Q': 323, 'type2-M12GB': 165, 'type1-36TX': 109, 'type1-CPU8245': 105, 'type1-MI': 115, 'type1-ES': 114, 'type3-16BACKPLANE': 240, 'type1-2XFP12GX12GT': 124, 'type4-4GB': 304, 'type1-M12GB': 101, 'type2-M1XFP12GX12GTR4': 203, 'type1-2XFP12GX12GTR4': 141, 'type1-2XFP12GX12GB': 134, 'type4-4GT': 300, 'type3-ES-FW': 233, 'type4-4FX': 301, 'type1-48GB': 130, 'type2-36TX': 173, 'type2-BACKPLANE': 170, 'type3-MI': 229, 'type1-ES2GB': 112, 'type3-24SFP-PLUS': 238, 'type2-E-24GB12GT': 206, 'type1-48GT': 127, 'type2-2XFP12GX12GTR4': 205.
                       switchFileCopy 1.3.6.1.4.1.6339.100.1.10
                             fileUserName 1.3.6.1.4.1.6339.100.1.10.1 displaystring read-write
ftp user name
                             fileUserPassword 1.3.6.1.4.1.6339.100.1.10.2 displaystring read-write
ftp user password
                             fileIPaddress 1.3.6.1.4.1.6339.100.1.10.3 displaystring read-write
ftp or tftp server ip address
                             sourceFileCopy 1.3.6.1.4.1.6339.100.1.10.4 displaystring read-write
Source file name or Copy from current system configuration .
                             destinationFileCopy 1.3.6.1.4.1.6339.100.1.10.5 displaystring read-write
Destination file name or Copy to startup configuration.
                             fileCopyMode 1.3.6.1.4.1.6339.100.1.10.6 integer read-write
ascii(0): ASCII file mode; binary(1): Binary file mode. Enumeration: 'binary': 1, 'ascii': 0.
                             fileCopyUseMode 1.3.6.1.4.1.6339.100.1.10.7 integer read-write
ftp(1): ftp server or client; tftp(2): tftp server or client. Enumeration: 'ftp': 1, 'tftp': 2.
                             fileCopy 1.3.6.1.4.1.6339.100.1.10.8 integer read-write
File copy configurate. Enumeration: 'download': 2, 'upload': 1.
                             fileCopyResult 1.3.6.1.4.1.6339.100.1.10.9 integer read-only
The result of file copy:error(0):copy file failure;ok(1):copy file success; uploading(2):in process of upload file;downloading(3):in process of download file; idle(4):be out of copy file. Enumeration: 'uploading': 2, 'idle': 4, 'downloading': 3, 'ok': 1, 'error': 0.
                       switchInfo 1.3.6.1.4.1.6339.100.1.11
                             switchCPUType 1.3.6.1.4.1.6339.100.1.11.1 displaystring read-only
The CPU type of switch
                             switchCPUFiveSecondIdle 1.3.6.1.4.1.6339.100.1.11.2 integer read-only
Last 5 second CPU IDLE
                             switchCPUThirtySecondIdle 1.3.6.1.4.1.6339.100.1.11.3 integer read-only
Last 30 second CPU IDLE
                             switchCPUFiveMinuteIdle 1.3.6.1.4.1.6339.100.1.11.4 integer read-only
Last 5 minute CPU IDLE
                             switchCPUIdle 1.3.6.1.4.1.6339.100.1.11.5 integer read-only
From running CPU IDLE
                             switchMemorySize 1.3.6.1.4.1.6339.100.1.11.6 integer read-only
memory size
                             switchMemoryBusy 1.3.6.1.4.1.6339.100.1.11.7 integer read-only
memory usage rent
                             switchFlashSize 1.3.6.1.4.1.6339.100.1.11.8 integer read-only
The flash capacity of switch.
                             switchTemperature 1.3.6.1.4.1.6339.100.1.11.9 integer read-only
The Temperature of switch.80 is 80centigrade
                             switchCpuUsage 1.3.6.1.4.1.6339.100.1.11.10 integer read-only
The CPU usage of switch.
                             switchMemoryUsage 1.3.6.1.4.1.6339.100.1.11.11 integer read-only
The memory usage of switch.
                       sysFanTable 1.3.6.1.4.1.6339.100.1.12 no-access
the state of fan.
                             sysFanEntry 1.3.6.1.4.1.6339.100.1.12.1 no-access
fan supply status
                                 sysFanIndex 1.3.6.1.4.1.6339.100.1.12.1.1 integer no-access
system fan entry index
                                 sysFanInserted 1.3.6.1.4.1.6339.100.1.12.1.2 integer read-only
Whether the slot fan is installed or not. Enumeration: 'sysFanNotInstalled': 0, 'sysFanInstalled': 1.
                                 sysFanStatus 1.3.6.1.4.1.6339.100.1.12.1.3 integer read-only
Whether the slot fan is normal or abnormal. Enumeration: 'abnormal': 1, 'normal': 0.
                                 sysFanSpeed 1.3.6.1.4.1.6339.100.1.12.1.4 integer read-write
Status of Fan. Status: Low(1), Medium-Low(2), Medium(3), Medium-High(4), High(5), none(0) is readonly Enumeration: 'none': 0, 'medium': 3, 'medium-high': 4, 'medium-low': 2, 'high': 5, 'low': 1.
                       switchBootImgPrimary 1.3.6.1.4.1.6339.100.1.13 displaystring read-write
Set or get filename of boot img for first time,and the length of filename is between 1 and 128.
                       switchBootImgSecondary 1.3.6.1.4.1.6339.100.1.14 displaystring read-write
Set or get filename of boot img for second time,and the length of filename is between 1 and 128.
                       switchBootStartUpCfg 1.3.6.1.4.1.6339.100.1.15 displaystring read-write
Set or get filename of boot startup config ,and the length of filename is between 1 and 128.
                       showSwitchStartUpStatus 1.3.6.1.4.1.6339.100.1.16 integer read-only
this object identifies start up status of switch and AM of chassis.1(idle) means hasn't wrote cfg since boot, 2(success) means wrote cfg successfully; 3(fail) means wrote cfg fail; 4(in-progress) means is writing cfg right now. for chassis:it can only be used by active master Enumeration: 'fail': 3, 'in-progress': 4, 'idle': 1, 'success': 2.
                       sysSlotBootInfoTable 1.3.6.1.4.1.6339.100.1.17 no-access
A list of boot information.it is only used by chassis.
                             sysSlotBootInfoEntry 1.3.6.1.4.1.6339.100.1.17.1 no-access
Entry for boot information.
                                 sysBootInfoIndex 1.3.6.1.4.1.6339.100.1.17.1.1 integer read-only
slot NO.
                                 sysBootImgPrimary 1.3.6.1.4.1.6339.100.1.17.1.2 displaystring read-write
Set or get filename of boot img for first time,and the length of filename is between 1 and 128.
                                 sysBootImgSecondary 1.3.6.1.4.1.6339.100.1.17.1.3 displaystring read-write
Set or get filename of boot img for backup,and the length of filename is between 1 and 128.
                                 sysBootStartupCfg 1.3.6.1.4.1.6339.100.1.17.1.4 displaystring read-write
Set or get filename of boot startup config ,and the length of filename is between 1 and 128.
                       sysSetBootPassword 1.3.6.1.4.1.6339.100.1.18
                             oldPassword 1.3.6.1.4.1.6339.100.1.18.1 displaystring read-write
If there is a old password, you should enter the old password, then you can set the new password or delete the password. The length of the password is between 3 and 32, enter wrong old password or enter wrong length password, you can not set new password or delete password.
                             newPassword 1.3.6.1.4.1.6339.100.1.18.2 displaystring read-write
Enter the new password you want to set, and the length of the password is between 3 and 32.
                             confirmPassword 1.3.6.1.4.1.6339.100.1.18.3 displaystring read-write
Enter the new password again to confirm the new password, the password entries must match.
                             deletePassword 1.3.6.1.4.1.6339.100.1.18.4 integer read-write
If you want to delete the password, enter '1'; if you don't want delete it, you can enter '0' or do nothing. Enumeration: 'enable': 1, 'disable': 0.
                             sysSetBootPwStatus 1.3.6.1.4.1.6339.100.1.18.5 integer read-write
If you enter '1', excute the operation you set. Firstly, judge the type of deletePassword, if it is '1', delete the password, and return ok; if the type is '0', then modify the password. At first judge the correctness of oldpassword, then judge the new password equal to confirm password. if they are all right, set the new password. Enumeration: 'enable': 1, 'disable': 0.
                       sysAddUser 1.3.6.1.4.1.6339.100.1.22
                             sysUserName 1.3.6.1.4.1.6339.100.1.22.1 displaystring read-write
set the username.
                             sysUserPassword 1.3.6.1.4.1.6339.100.1.22.2 displaystring read-write
set the password.
                             sysUserPasswordOption 1.3.6.1.4.1.6339.100.1.22.3 integer read-write
set a uncrypted(0) or crypted(7) password,default uncrypted(0). Enumeration: 'crypted': 7, 'uncrypted': 0.
                             sysUserNamePrivilege 1.3.6.1.4.1.6339.100.1.22.4 integer read-write
set username privilege,default 15.
                             sysAddUserStatus 1.3.6.1.4.1.6339.100.1.22.5 integer read-write
enable(1) user name and password. Enumeration: 'enable': 1.
                       priPowerTable 1.3.6.1.4.1.6339.100.1.23 no-access
Table of power information about switches in this switch.
                             priPowerEntry 1.3.6.1.4.1.6339.100.1.23.1 no-access
An entry in the table, containing information about power in this switch.
                                 priPowerIndex 1.3.6.1.4.1.6339.100.1.23.1.1 integer read-only
get power number(power1;power2).
                                 priPowerPresent 1.3.6.1.4.1.6339.100.1.23.1.2 integer read-only
get power's status of present(1:present; 0: not present).
                                 priPowerSupply 1.3.6.1.4.1.6339.100.1.23.1.3 integer read-only
get power's supply status(1:up; 0:shutdown).
                             priPowerStatus 1.3.6.1.4.1.6339.100.1.23.2 integer read-only
get power status(1:AC; 2:DC). Enumeration: 'ac': 1, 'dc': 2.
                       vsfInfo 1.3.6.1.4.1.6339.100.1.30
                             vsfCount 1.3.6.1.4.1.6339.100.1.30.1 integer read-only
vsf member count.
                             vsfModuleTable 1.3.6.1.4.1.6339.100.1.30.2 no-access
Table of descriptive and status information about vsf in this system.
                                 vsfModuleEntry 1.3.6.1.4.1.6339.100.1.30.2.1 no-access
An entry in the table, containing information about vsf in this system.
                                     vsfSlotIndex 1.3.6.1.4.1.6339.100.1.30.2.1.1 integer read-only
the value is real vsf slot number.
                                     vsfMemberIndex 1.3.6.1.4.1.6339.100.1.30.2.1.2 integer read-only
vsf member index.
                                     vsfModuleType 1.3.6.1.4.1.6339.100.1.30.2.1.3 integer read-only
Type of expansion module in this vsf slot. Enumeration: 'type2-NEWMI': 202, 'type1-M8GB': 118, 'type5-M16K-16Q': 321, 'type1-L-M4GX24TX': 122, 'type1-16FX': 111, 'type1-24GB12GT': 137, 'type2-4GX24TX': 185, 'type1-4GX24TX': 121, 'type2-110Gx': 168, 'type1-M4GX24TX': 113, 'type2-M8GB': 182, 'type5-M16K-FC': 322, 'type1-12GX12GTR4': 140, 'type1-M44GT': 131, 'type5-M16K-24T24S2XS': 324, 'type3-8XFP': 235, 'type1-4XFP': 129, 'type1-MII': 116, 'type2-2XFP8GX16GB': 183, 'type1-E-2XFP24GB12GT': 143, 'type3-MII': 230, 'type1-12GB': 117, 'type2-M1XFP12GX12GT': 192, 'type2-ES2GB': 176, 'type2-M1XFP12GX12GB': 196, 'type2-12GX12GTR4': 204, 'type1-12GT': 102, 'type3-M': 228, 'typeMFC': 0, 'type2-8GX16GB': 184, 'type2-E-2XFP24GB12GT': 207, 'type3-08BACKPLANE': 239, 'type2-12GT': 166, 'type2-16FX': 175, 'type5-M16K-SUP': 320, 'type2-MI': 179, 'type1GL': 3, 'type1GS': 2, 'type2-12GB': 181, 'type1-1XFP8GX16GB': 123, 'type3-24GT-V': 236, 'type2-24GB12GT': 201, 'type1-4GX32TX': 110, 'type8QSFP': 145, 'type2-12GX12GT': 189, 'type10M100MT': 8, 'type1-8GX16GB': 120, 'type1-M1XFP12GX12GB': 132, 'type2-12GX12GB': 197, 'type1-M1XFP12GX12GT': 128, 'type2-1XFP8GX16GB': 187, 'type1-NEWMI': 138, 'type1-12GX12GT': 125, 'type2-2XFP12GX12GB': 198, 'type1-1XFP12GX12GT': 126, 'type1-12GX12GB': 133, 'type2-2XFP12GX12GT': 188, 'type2-4XFP': 193, 'type100M1GT': 4, 'type1-110Gx': 104, 'type3-4XFP': 234, 'type2-24GT': 172, 'type2-1XFP12GX12GT': 190, 'type1-E-24GB12GT': 142, 'type4-2GB': 302, 'type2-24GB': 171, 'type1-210Gx': 103, 'type1-2XFP24GB12GT': 136, 'type2-M44GT': 195, 'typeSFC': 1, 'type4-4TX': 303, 'type2-2XFP24GB12GT': 200, 'type1-24GT': 108, 'type2-CPU8245': 169, 'type2-4GX32TX': 174, 'type1-BACKPLANE': 106, 'type2-210Gx': 167, 'type1-24GB': 107, 'type2-ES': 178, 'type1-M1XFP12GX12GTR4': 139, 'type2-L-M4GX24TX': 186, 'type2-MII': 180, 'type2-M4GX24TX': 177, 'type3-24GB-V': 237, 'type1-2XFP8GX16GB': 119, 'type2-48GT': 191, 'type3-24GT': 231, 'type2-48GB': 194, 'type3-24GB': 232, 'type4-4FB': 305, 'type5-M16K-48XS2Q': 323, 'type2-M12GB': 165, 'type1-36TX': 109, 'type1-CPU8245': 105, 'type1-MI': 115, 'type1-ES': 114, 'type3-16BACKPLANE': 240, 'type1-2XFP12GX12GT': 124, 'type4-4GB': 304, 'type1-M12GB': 101, 'type2-M1XFP12GX12GTR4': 203, 'type1-2XFP12GX12GTR4': 141, 'type1-2XFP12GX12GB': 134, 'type4-4GT': 300, 'type3-ES-FW': 233, 'type4-4FX': 301, 'type1-48GB': 130, 'type2-36TX': 173, 'type2-BACKPLANE': 170, 'type3-MI': 229, 'type1-ES2GB': 112, 'type3-24SFP-PLUS': 238, 'type2-E-24GB12GT': 206, 'type1-48GT': 127, 'type2-2XFP12GX12GTR4': 205.
                       sysMonitorAlarmTable 1.3.6.1.4.1.6339.100.1.31 no-access
the state of MonitorAlarm.
                             sysMonitorAlarmEntry 1.3.6.1.4.1.6339.100.1.31.1 no-access
MonitorAlarm supply status
                                 sysMonitorAlarmIndex 1.3.6.1.4.1.6339.100.1.31.1.1 integer no-access
system MonitorAlarm entry index
                                 sysMonitorAlarmEnable 1.3.6.1.4.1.6339.100.1.31.1.2 integer read-only
Whether the slot MonitorAlarm is enabled or not. Enumeration: 'sysMonitorAlarmNotEnable': 0, 'sysMonitorAlarmEnable': 1.
                                 sysMonitorAlarmBindSet 1.3.6.1.4.1.6339.100.1.31.1.3 integer read-only
Whether the slot fan is normal or abnormal. Enumeration: 'input1-output1': 1, 'input2-output2': 4, 'input1-output2': 2, 'input2-output1': 3.
                                 sysMonitorAlarmInputSet 1.3.6.1.4.1.6339.100.1.31.1.4 integer read-write
InputSet of MonitorAlarm. Status: input1-high(1), input1-low(2), input2-high(3), input2-low(4) is readonly Enumeration: 'input1-high': 1, 'input2-high': 3, 'input1-low': 2, 'input2-low': 4.
                                 sysMonitorAlarmOutputSet 1.3.6.1.4.1.6339.100.1.31.1.5 integer read-write
Output of MonitorAlarm. Status: output1-high(1), output1-low(2), output2-high(3)), output2-low(4)is readonly Enumeration: 'output2-high': 3, 'output1-high': 1, 'output1-low': 2, 'output2-low': 4.
                       deviceTypeID 1.3.6.1.4.1.6339.100.1.100 integer read-only
the hardware type ID of the physical entity.
                   priSpanningTree 1.3.6.1.4.1.6339.100.2
                       spanGlobalEnable 1.3.6.1.4.1.6339.100.2.1 integer read-write
Enable or disable the Spanning Tree algorithm in the switch. Enumeration: 'enable': 1, 'disable': 2.
                       mstpMgt 1.3.6.1.4.1.6339.100.2.2
                           mstpSystemGroup 1.3.6.1.4.1.6339.100.2.2.1
                               mstpEnable 1.3.6.1.4.1.6339.100.2.2.1.1 integer read-only
Enable or disable the Spanning Tree algorithm in the switch. Enumeration: 'enable': 1, 'disable': 0.
                               mstpTCFlush 1.3.6.1.4.1.6339.100.2.2.1.2 integer read-only
configure global style of TC FLUSH Enumeration: 'protect': 3, 'enable': 1, 'disable': 2.
                               mstpForwardTime 1.3.6.1.4.1.6339.100.2.2.1.3 integer read-only
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database.
                               mstpHelloTime 1.3.6.1.4.1.6339.100.2.2.1.4 integer read-only
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                               mstpMaxage 1.3.6.1.4.1.6339.100.2.2.1.5 integer read-only
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
                               mstpMaxhop 1.3.6.1.4.1.6339.100.2.2.1.6 integer read-only
setting global Maxhop of mstp
                               mstpMode 1.3.6.1.4.1.6339.100.2.2.1.7 integer read-only
setting global mode of mstp,stp or rstp Enumeration: 'mstp': 3, 'stp': 0, 'rstp': 2.
                               mstpName 1.3.6.1.4.1.6339.100.2.2.1.8 displaystring read-only
setting the name of mst
                               mstpRevisionLevel 1.3.6.1.4.1.6339.100.2.2.1.9 integer read-only
setting the global revision level of mstp
                               mstpBridgeForwardDelay 1.3.6.1.4.1.6339.100.2.2.1.10 integer read-only
setting global Forwardtime of mstp
                               mstpBridgeHelloTime 1.3.6.1.4.1.6339.100.2.2.1.11 integer read-only
setting global HelloTime of mstp
                               mstpBridgeMaxage 1.3.6.1.4.1.6339.100.2.2.1.12 integer read-only
setting global Maxage of mstp
                           mstpInstanceTable 1.3.6.1.4.1.6339.100.2.2.2 no-access
correlative information list with instance
                               mstpInstanceEntry 1.3.6.1.4.1.6339.100.2.2.2.1 no-access
The index of this table is instance ID
                                   mstpInstanceID 1.3.6.1.4.1.6339.100.2.2.2.1.1 integer no-access
instance ID
                                   mstpInstanceVlans 1.3.6.1.4.1.6339.100.2.2.2.1.2 displaystring read-only
the map of vlans to instance.The input format is consonant with cli.
                                   mstpInstanceSwitchPriority 1.3.6.1.4.1.6339.100.2.2.2.1.3 integer read-only
the priority of the router in the special instance.
                                   mstpInstanceRegionRootID 1.3.6.1.4.1.6339.100.2.2.2.1.4 octet string read-only
the region root ID in the special instance.
                                   mstpInstanceIntRootPathCost 1.3.6.1.4.1.6339.100.2.2.2.1.5 unsigned32 read-only
the path cost from self bridge to Region Root.
                                   mstpInstanceRootPortID 1.3.6.1.4.1.6339.100.2.2.2.1.6 octet string read-only
the root port ID in the special instance.
                           mstpInstancePortTable 1.3.6.1.4.1.6339.100.2.2.3 no-access
interrelated parameter list of instance and port
                               mstpInstancePortEntry 1.3.6.1.4.1.6339.100.2.2.3.1 no-access
The index of this table is instance ID and port index
                                   mstpInstancePortInstanceID 1.3.6.1.4.1.6339.100.2.2.3.1.1 integer no-access
instance ID
                                   mstpInstancePortPortIndex 1.3.6.1.4.1.6339.100.2.2.3.1.2 integer no-access
port index
                                   mstpInstancePortCost 1.3.6.1.4.1.6339.100.2.2.3.1.3 integer read-only
port cost of port under the special instance
                                   mstpInstancePortPriority 1.3.6.1.4.1.6339.100.2.2.3.1.4 integer read-only
port priority of port under the special instance
                                   mstpInstancePortRootGuard 1.3.6.1.4.1.6339.100.2.2.3.1.5 integer read-only
rootguard enable/disable on the current instance Enumeration: 'enable': 1, 'disable': 0.
                                   mstpInstancePortID 1.3.6.1.4.1.6339.100.2.2.3.1.6 octet string read-only
ID of port which receive a BPDU
                                   mstpInstancePortExtRootPathCost 1.3.6.1.4.1.6339.100.2.2.3.1.7 unsigned32 read-only
the path cost from self bridge to Root bridge
                                   mstpInstancePortIntRootPathCost 1.3.6.1.4.1.6339.100.2.2.3.1.8 unsigned32 read-only
the path cost from self bridge to Region Root
                                   mstpInstancePortState 1.3.6.1.4.1.6339.100.2.2.3.1.9 integer read-only
the port state in the instance Enumeration: 'forwarding': 1, 'learning': 2, 'block': 0.
                                   mstpInstancePortRole 1.3.6.1.4.1.6339.100.2.2.3.1.10 integer read-only
the port role in the instance Enumeration: 'backup': 4, 'alternate': 1, 'designated': 3, 'disabled': 6, 'master': 5, 'nonstp': 0, 'root': 2.
                                   mstpInstancePortDesignatedBridgeID 1.3.6.1.4.1.6339.100.2.2.3.1.11 octet string read-only
the designated bridge ID
                                   mstpInstancePortDesignatedPortID 1.3.6.1.4.1.6339.100.2.2.3.1.12 octet string read-only
the designated port ID
                           mstpPortInfoTable 1.3.6.1.4.1.6339.100.2.2.4 no-access
mstp information list of port
                               mstpPortInfoEntry 1.3.6.1.4.1.6339.100.2.2.4.1 no-access
The index of this table is port index
                                   mstpPortInfoPortIndex 1.3.6.1.4.1.6339.100.2.2.4.1.1 integer no-access
port index
                                   mstpPortInfoEnable 1.3.6.1.4.1.6339.100.2.2.4.1.2 integer read-only
enable/disable mstp on the port. Enumeration: 'enable': 1, 'disable': 0.
                                   mstpPortLinkType 1.3.6.1.4.1.6339.100.2.2.4.1.3 integer read-only
the p2p link type of the port Enumeration: 'force-true': 1, 'auto': 2, 'force-false': 0.
                                   mstpPortMcheck 1.3.6.1.4.1.6339.100.2.2.4.1.4 integer read-only
trigger/untrigger Enumeration: 'trigger': 1, 'untrigger': 0.
                                   mstpPortPortFast 1.3.6.1.4.1.6339.100.2.2.4.1.5 integer read-only
default:the port mode is portfast mode bpdufilter:the port mode is portfast mode with bpdufilter bpduguard:the port mode is portfast mode with bpduguard noportfast:the port mode is not portfast mode Enumeration: 'default': 0, 'noportfast': 3, 'bpduguard': 2, 'bpdufilter': 1.
                                   mstpPortFormat 1.3.6.1.4.1.6339.100.2.2.4.1.6 integer read-only
which mode can be setted up port of message format function Enumeration: 'auto': 2, 'privacy': 1, 'standard': 0.
                                   mstpPortDigestSnp 1.3.6.1.4.1.6339.100.2.2.4.1.7 integer read-only
Whether the port use peer's authentication key Enumeration: 'enable': 1, 'disable': 0.
                                   mstpPortTCFlush 1.3.6.1.4.1.6339.100.2.2.4.1.8 integer read-only
when topology is changed, how to flush the mac Enumeration: 'useglobal': 0, 'protect': 3, 'enable': 1, 'disable': 2.
                   priPorts 1.3.6.1.4.1.6339.100.3
                       portCount 1.3.6.1.4.1.6339.100.3.1 integer read-only
The total number of ports in the system.
                       portTable 1.3.6.1.4.1.6339.100.3.2 no-access
A list of port entries.
                           priPortEntry 1.3.6.1.4.1.6339.100.3.2.1 no-access
A port entry containing port information, status, and control.
                               portIndex 1.3.6.1.4.1.6339.100.3.2.1.1 integer read-only
port No.
                               portName 1.3.6.1.4.1.6339.100.3.2.1.2 displaystring read-only
Name of the port. exp:financial.
                               switchNum 1.3.6.1.4.1.6339.100.3.2.1.3 integer read-only
This value is denoting the number of swith in which this port resides. For the non-stackable device,the value is always 1. While for the stackable device, the value is real switch stack number.
                               slotNum 1.3.6.1.4.1.6339.100.3.2.1.4 integer read-only
This value is denoting the number of slot. For the static slot,the value is 1,while for the extended slot the value is real extended slot number.
                               portType 1.3.6.1.4.1.6339.100.3.2.1.5 integer read-only
Type of expansion module in this port. Enumeration: 'typeCombo': 1, 'typeFiber': 2, 'typeSingleOptGE': 6, 'typeElecFE': 5, 'typePortAGG': 9, 'typeElecGE': 8, 'typeSFP': 0, 'typeSingleOptFE': 3, 'typeMultiOptGE': 7, 'typeMultiOptFE': 4, 'typePortUsbGE': 10, 'typeOptXge': 11, 'other': 255.
                               flowControlStatus 1.3.6.1.4.1.6339.100.3.2.1.6 integer read-write
The flow-control status of the port. Its functionality is exactly same as 'flow control' or 'no flow control' commands in console mode. Enumeration: 'enable': 1, 'disable': 0.
                               bandwidthControlStatus 1.3.6.1.4.1.6339.100.3.2.1.7 integer read-only
The bandwidth-control status of the port. Its functionality is to stop the bandwidth control. The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith. Enumeration: 'both': 2, 'ingress': 0, 'egress': 1, 'none': 3.
                               maxBandwidth 1.3.6.1.4.1.6339.100.3.2.1.8 integer read-only
The max bandwidth of the port. Enumeration: 'default': 0, 'bw1000M': 2, 'bw10000M': 3, 'bw100M': 1, 'bw40000M': 4.
                               receiveBandwidth 1.3.6.1.4.1.6339.100.3.2.1.9 integer read-write
The recevice bandwidth of the port. Its unit is kbs. The command 'bandwidth control 50 both' in console mode equals setting both receiveBandwidth and transmitBandwidth to 50 kbs. Set 0 is no bandwidth.
                               transmitBandwidth 1.3.6.1.4.1.6339.100.3.2.1.10 integer read-write
The transmit bandwidth of the port. Its unit is kbs. Set 0 is no bandwidth.
                               shutdown 1.3.6.1.4.1.6339.100.3.2.1.12 integer read-write
Close or open to specify the port. Enumeration: 'noshutdown': 1, 'shutDown': 0.
                               loopback 1.3.6.1.4.1.6339.100.3.2.1.13 integer read-write
Open or close to specify the wreath of the port back to test the function. Enumeration: 'noloopback': 0, 'loopback': 1.
                               speedDuplex 1.3.6.1.4.1.6339.100.3.2.1.14 integer read-write
The speed and duplex status of the port. Enumeration: 'neg-10-100-full': 20, 'neg-full-10g': 24, 'full-1000-M': 9, 'neg-10-100-1000-half': 23, 'fx-100-no-phy': 15, 'full100': 4, 'full-1000-s': 10, 'neg-10-100-1000-full': 22, 'half10': 1, 'neg-10-100-half': 21, 'full-10g': 25, 'fx-100-phy': 14, 'full-40g': 26, 'auto': 0, 'half100': 3, 'full1000': 6, 'half-1000-s': 8, 'full10': 2, 'neg-10-auto': 16, 'neg-10-100-auto': 19, 'half1000': 5, 'neg-10-full': 17, 'half-1000-M': 7, 'neg-10-half': 18, 'fx-100': 13.
                               portMode 1.3.6.1.4.1.6339.100.3.2.1.15 integer read-write
port mode: 1 is access,2 is trunk,3 is hybrid Enumeration: 'access': 1, 'hybrid': 3, 'trunk': 2.
                               pvid 1.3.6.1.4.1.6339.100.3.2.1.16 integer read-write
port of native vlan No.
                               indicatesType 1.3.6.1.4.1.6339.100.3.2.1.17 integer read-only
Indicates the port type of the configuration of the switch. Enumeration: 'hundredBaseFX': 3, 'thousandBaseGBIC': 7, 'thousandBaseLX': 5, 'hundredBaseTX': 2, 'tenG': 12, 'hundredBaseFxScSingleMode': 9, 'thousandBaseT': 6, 'other': 1, 'thousandBaseSfp': 8, 'thousandBaseCX': 11, 'hundredBaseFxScMultiMode': 10, 'thousandBaseSX': 4.
                               vctAction 1.3.6.1.4.1.6339.100.3.2.1.18 integer read-write
This object indicates the VCT action of the port,only the value 1 is permitted when SET this entry though you can GET 1(processing) and 0(succeed); The specified port will be shutdown when one sets 1 to this entry,and then it will return to no shutdown after operate the virtual-cable-test. You can get the status of VCT from the entry vctLastStatus.
                               vctLastStatus 1.3.6.1.4.1.6339.100.3.2.1.19 displaystring read-only
Indicates the last VCT status of the port.
                               portTrunkAllowedvlan 1.3.6.1.4.1.6339.100.3.2.1.20 octet string read-write
trunk port allowed vlan list string
                               portHybridTaggedAllowedvlan 1.3.6.1.4.1.6339.100.3.2.1.21 octet string read-write
hybrid port tagged allowed vlan list string
                               portHybridUntaggedAllowedvlan 1.3.6.1.4.1.6339.100.3.2.1.22 octet string read-write
hybrid port untagged allowed vlan list string
                               portBandWidthUsage 1.3.6.1.4.1.6339.100.3.2.1.23 integer read-only
The percentage of the port's bandwidth usage
                               lastFiveMinInPktsPerSec 1.3.6.1.4.1.6339.100.3.2.1.24 counter32 read-only
last five minutes input packets/Sec.
                               lastFiveMinOutPktsPerSec 1.3.6.1.4.1.6339.100.3.2.1.25 counter32 read-only
last five minutes output packets/Sec.
                               lastFiveSecInPktsPerSec 1.3.6.1.4.1.6339.100.3.2.1.26 counter32 read-only
last five seconds input packets/Sec.
                               lastFiveSecOutPktsPerSec 1.3.6.1.4.1.6339.100.3.2.1.27 counter32 read-only
last five seconds output packets/Sec.
                               transceiverSn 1.3.6.1.4.1.6339.100.3.2.1.28 displaystring read-only
serial num of transceiver.if port is not a transceiver,value is null.
                               portBlockMode 1.3.6.1.4.1.6339.100.3.2.1.29 counter32 read-only
port block mode.value: noblock: 0, rate-violation block: 1, loopback-detection block: 2, unknown-protocol block: 3
                               portBlockState 1.3.6.1.4.1.6339.100.3.2.1.30 counter32 read-only
port shutdown mode.value: noblock state: 0, rate-violation block state: 1, loopback-detection block state: 2, unknown-protocol block state: 3
                               portComboMediaType 1.3.6.1.4.1.6339.100.3.2.1.31 integer read-write
The media type of combo port Enumeration: 'phyModeUnkown': 0, 'phyModeFiberPrefered': 3, 'phyModeCopperPrefered': 1, 'phyModeFiberForced': 4, 'phyModeCopperForced': 2.
                       stormControlTable 1.3.6.1.4.1.6339.100.3.3 no-access
storm-contol table
                           stormControlEntry 1.3.6.1.4.1.6339.100.3.3.1 no-access
storm-control entry
                               stormControlIndex 1.3.6.1.4.1.6339.100.3.3.1.1 integer read-only
port index
                               stormControlType 1.3.6.1.4.1.6339.100.3.3.1.2 integer read-only
broadcast(broadcast rate suppression),multicast(multicast rate suppression), unicast(unicast rate suppression),dlf(Destination Lookup Failure rate suppression), brmc(broadcast and multicast rate suppression),brmcdlf(Broadcast, multicast and DLF rate suppression) Enumeration: 'unicast': 2, 'all': 6, 'dlf': 3, 'broadcast': 0, 'brmcdlf': 5, 'multicast': 1, 'brmc': 4.
                               stormControlRate 1.3.6.1.4.1.6339.100.3.3.1.3 integer read-write
the suppress rate.the value range at <1> or <1> on different devices.
                               stormControlStatus 1.3.6.1.4.1.6339.100.3.3.1.4 integer read-write
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry Enumeration: 'active': 1, 'destroy': 0.
                       loopbackDetection 1.3.6.1.4.1.6339.100.3.4
                           loopbackDetecCtrlRecovery 1.3.6.1.4.1.6339.100.3.4.1 integer read-write
This value is the state recovery time.When this time comes, port back to the normal state.But when the value is 0, does not restore state.
                           loopbackDetecIntervalTime 1.3.6.1.4.1.6339.100.3.4.2
                               lpbackDetecExistInterval 1.3.6.1.4.1.6339.100.3.4.2.1 integer read-write
This detection time interval is present when the loop exists, in seconds, the range of 5 to 300. The default value is 5.
                               lpbackDetecNoExistInterval 1.3.6.1.4.1.6339.100.3.4.2.2 integer read-write
This detection time interval is present when the loop does not exist, in seconds, the range from 1 to 30,The default value is 3.
                           loopbackDetecCtrlTable 1.3.6.1.4.1.6339.100.3.4.3 no-access
A table containing current configuration information for the function of loopback detection control.
                               loopbackDetecCtrlEntry 1.3.6.1.4.1.6339.100.3.4.3.1 no-access
An entry in the loopback detection control table.
                                   lpbackDetecCtrlIndex 1.3.6.1.4.1.6339.100.3.4.3.1.1 integer no-access
An unique value for each port.
                                   lpbackDetecCtrlMode 1.3.6.1.4.1.6339.100.3.4.3.1.2 integer read-write
Indicates the control type of the configuration of the loopback detection. The default value is 0. When the value is set to 0,the loopback detection control function will be disabled. Enumeration: 'nocontrol': 0, 'block': 2, 'shutdown': 1.
                           loopbackDetecSpecVlanTable 1.3.6.1.4.1.6339.100.3.4.4 no-access
Setting the loopback detection function for the specified vlan of the port.
                               loopbackDetecSpecVlanEntry 1.3.6.1.4.1.6339.100.3.4.4.1 no-access
An entry in the loopbackDetecSpecVlanTable.
                                   lpbackDetecVlanPortIndex 1.3.6.1.4.1.6339.100.3.4.4.1.1 integer no-access
An unique value for each port.
                                   lpbackDetecVlanList 1.3.6.1.4.1.6339.100.3.4.4.1.2 displaystring read-write
The value is a vlan list that you will set.Please pay attention to the list of writing,eg:1;3;5-20 .
                                   lpbackDetecVlanListSetFlag 1.3.6.1.4.1.6339.100.3.4.4.1.3 integer read-write
When lpbackDetecVlanListSetFlag is 1,open the specified VLAN loopback detection function.When lpbackDetecVlanListSetFlag is 0,close the specified VLAN loopback detection function. Enumeration: 'close': 0, 'open': 1.
                           loopbackDetecShowTable 1.3.6.1.4.1.6339.100.3.4.5 no-access
Show the config and state of loopback detection for the specified port.
                               loopbackDetecShowEntry 1.3.6.1.4.1.6339.100.3.4.5.1 no-access
An entry in the loopbackDetecShowTable.
                                   lpbackDetecShowPortIndex 1.3.6.1.4.1.6339.100.3.4.5.1.1 integer no-access
An unique value for each port.
                                   lpbackDetecShowInformation 1.3.6.1.4.1.6339.100.3.4.5.1.2 displaystring read-only
The value display the configuration and state of loopback detection for the specified port.
                       stormControlPortTable 1.3.6.1.4.1.6339.100.3.5 no-access
storm-contol port table
                           stormControlPortEntry 1.3.6.1.4.1.6339.100.3.5.1 no-access
storm-control entry
                               stormControlPortIndex 1.3.6.1.4.1.6339.100.3.5.1.1 integer read-only
port index
                               stormControlSuppressType 1.3.6.1.4.1.6339.100.3.5.1.2 integer read-only
broadcast(broadcast rate suppression),multicast(multicast rate suppression), unicast(unicast rate suppression)) Enumeration: 'broadcast': 0, 'unicast': 2, 'multicast': 1.
                               stormControlSuppressRateUnit 1.3.6.1.4.1.6339.100.3.5.1.3 integer read-write
set kbps as measure or set pps as measure Enumeration: 'pps': 1, 'kbps': 0.
                               stormControlSuppressRateValue 1.3.6.1.4.1.6339.100.3.5.1.4 integer read-write
if the suppressrate unit is pps,the value range at <1> ,or if the suppressrate unit is bps,the value range at <1>, it depends on stormControlSuppressRateUnit.
                               stormControlSuppressStatus 1.3.6.1.4.1.6339.100.3.5.1.5 integer read-write
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry Enumeration: 'active': 1, 'destroy': 0.
                       flowCounterTable 1.3.6.1.4.1.6339.100.3.6 no-access
control port and vlan interface flow table
                           flowCouterEntry 1.3.6.1.4.1.6339.100.3.6.1 no-access
control port and vlan interface flow entry
                               flowPortIndex 1.3.6.1.4.1.6339.100.3.6.1.1 integer read-only
Port Index
                               flowVlanID 1.3.6.1.4.1.6339.100.3.6.1.2 integer read-only
Vlan ID
                               flowCounterInOctets 1.3.6.1.4.1.6339.100.3.6.1.3 counter64 read-only
The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets.
                               flowCounterInUcastPkts 1.3.6.1.4.1.6339.100.3.6.1.4 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts.
                               flowCounterInMulticastPkts 1.3.6.1.4.1.6339.100.3.6.1.5 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts.
                               flowCounterInBroadcastPkts 1.3.6.1.4.1.6339.100.3.6.1.6 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts.
                               flowCounterOutOctets 1.3.6.1.4.1.6339.100.3.6.1.7 counter64 read-only
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.
                               flowCounterOutUcastPkts 1.3.6.1.4.1.6339.100.3.6.1.8 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts.
                               flowCounterOutMulticastPkts 1.3.6.1.4.1.6339.100.3.6.1.9 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts.
                               flowCounterOutBroadcastPkts 1.3.6.1.4.1.6339.100.3.6.1.10 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts.
                               clearFlowCounter 1.3.6.1.4.1.6339.100.3.6.1.11 integer read-write
Clear flow counter. Enumeration: 'enable': 1, 'disable': 0.
                       sumFlowCounterTable 1.3.6.1.4.1.6339.100.3.7 no-access
control port and vlan interface flow table
                           sumFlowCouterEntry 1.3.6.1.4.1.6339.100.3.7.1 no-access
control port and vlan interface flow entry
                               sumFlowVlanID 1.3.6.1.4.1.6339.100.3.7.1.1 integer read-only
Vlan ID
                               sumFlowCounterInOctets 1.3.6.1.4.1.6339.100.3.7.1.2 counter64 read-only
The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets.
                               sumFlowCounterInPkts 1.3.6.1.4.1.6339.100.3.7.1.3 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts.
                               sumFlowCounterOutOctets 1.3.6.1.4.1.6339.100.3.7.1.4 counter64 read-only
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.
                               sumFlowCounterOutPkts 1.3.6.1.4.1.6339.100.3.7.1.5 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts.
                               clearSumFlowCounter 1.3.6.1.4.1.6339.100.3.7.1.6 integer read-write
Clear flow counter. Enumeration: 'enable': 1, 'disable': 0.
                       portUtilTable 1.3.6.1.4.1.6339.100.3.10 no-access
A list of port util entries.
                             portUtilEntry 1.3.6.1.4.1.6339.100.3.10.1 no-access
A port util entry containing wan port in util,wan port out util, bit error rate and packet lost rate.
                                 portUtilIndex 1.3.6.1.4.1.6339.100.3.10.1.1 integer read-only
port No.
                                 wanIfInUtil 1.3.6.1.4.1.6339.100.3.10.1.2 integer read-only
WAN port inflows utilization.
                                 wanIfOutUtil 1.3.6.1.4.1.6339.100.3.10.1.3 integer read-only
WAN port outflows utilization.
                                 ifBer 1.3.6.1.4.1.6339.100.3.10.1.4 integer read-only
port error rate.
                                 ifPaketLostRate 1.3.6.1.4.1.6339.100.3.10.1.5 integer read-only
port packet lost rate.
                       portLEDShutoffTable 1.3.6.1.4.1.6339.100.3.11
                             portLEDTimerange 1.3.6.1.4.1.6339.100.3.11.1
                                 portLEDTimeRangeMapTable 1.3.6.1.4.1.6339.100.3.11.1.1 no-access
timeRange Map Table
                                     portLEDTimeRangeMapEntry 1.3.6.1.4.1.6339.100.3.11.1.1.1 no-access
timeRange Map Entry
                                         portLEDTimeRangeMapIndex 1.3.6.1.4.1.6339.100.3.11.1.1.1.1 integer read-only
TimeRange Map index,the range of it is 1-(2^32-1).
                                         portLEDTimeRangeMapName 1.3.6.1.4.1.6339.100.3.11.1.1.1.2 displaystring read-write
TimeRange Map name
                                         portLEDTimeRangeMapStatus 1.3.6.1.4.1.6339.100.3.11.1.1.1.3 integer read-write
TimeRange Map status Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                 portLEDTimeRangeTable 1.3.6.1.4.1.6339.100.3.11.1.2 no-access
timeRange Table
                                     portLEDTimeRangeEntry 1.3.6.1.4.1.6339.100.3.11.1.2.1 no-access
timeRange Entry
                                         portLEDTimeRangeIndex 1.3.6.1.4.1.6339.100.3.11.1.2.1.1 integer read-only
TimeRange index,the allowed range is 1 to 1000.
                                         portLEDTimeRangeSubIndex 1.3.6.1.4.1.6339.100.3.11.1.2.1.2 integer read-only
TimeRange sub index,the allowed range is 1 to 1000.
                                         portLEDTimeRangeType 1.3.6.1.4.1.6339.100.3.11.1.2.1.3 integer read-write
TimeRange type Enumeration: 'periodic': 2, 'absolute': 1.
                                         portLEDTimeRangeStartWeek 1.3.6.1.4.1.6339.100.3.11.1.2.1.4 bits read-write
configurate the start week,for example: f8 means monday+tuesday+wednesday+thurday+friday, the lowest bit is not used,so fe is the biggest. Bits: 'monday': 0, 'tuesday': 1, 'friday': 4, 'wednesday': 2, 'thursday': 3, 'sunday': 6, 'saturday': 5.
                                         portLEDTimeRangeStartDate 1.3.6.1.4.1.6339.100.3.11.1.2.1.5 displaystring read-write
configurate the start Date,for example YYYY.MM.DD .
                                         portLEDTimeRangeStartTime 1.3.6.1.4.1.6339.100.3.11.1.2.1.6 displaystring read-write
configurate the start clock,for example HH:MM:SS.
                                         portLEDTimeRangeEndWeek 1.3.6.1.4.1.6339.100.3.11.1.2.1.7 bits read-write
configurate the end week,for example: f8 means monday+tuesday+wednesday+thurday+friday, the lowest bit is not used,so fe is the biggest. Bits: 'monday': 0, 'tuesday': 1, 'friday': 4, 'wednesday': 2, 'thursday': 3, 'sunday': 6, 'saturday': 5.
                                         portLEDTimeRangeEndDate 1.3.6.1.4.1.6339.100.3.11.1.2.1.8 displaystring read-write
configurate the end date,for example YYYY.MM.DD.
                                         portLEDTimeRangeEndTime 1.3.6.1.4.1.6339.100.3.11.1.2.1.9 displaystring read-write
configurate the end clock,for example HH:MM:SS.
                                         portLEDTimeRangeStatus 1.3.6.1.4.1.6339.100.3.11.1.2.1.10 integer read-write
status of timeRangeMapTable Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             portLEDConfig 1.3.6.1.4.1.6339.100.3.11.2
                                 portLEDTimeRangeName 1.3.6.1.4.1.6339.100.3.11.2.1 displaystring read-write
the timer range of port LED shut-off config
                                 portLEDState 1.3.6.1.4.1.6339.100.3.11.2.2 integer read-only
enable or disable LED shut-off on all ports. Enumeration: 'allOff': 1, 'allOn': 0.
                       portTruckAllowedVlanTable 1.3.6.1.4.1.6339.100.3.12 no-access
Truck port alllowed vlan table
                             portTruckAllowedVlanEntry 1.3.6.1.4.1.6339.100.3.12.1 no-access
Truck port alllowed vlan entry
                                 portTruckPortIndex 1.3.6.1.4.1.6339.100.3.12.1.1 integer no-access
port index of truck mode
                                 portTruckAllowedVlan 1.3.6.1.4.1.6339.100.3.12.1.2 octet string read-write
VLAN IDs of the allowed VLANs when this port is in trunking mode.
                                 portTruckAllowedVlanAdd 1.3.6.1.4.1.6339.100.3.12.1.3 octet string read-write
Add VLANs to the current list.
                                 portTruckAllowedVlanExcept 1.3.6.1.4.1.6339.100.3.12.1.4 octet string read-write
All VLANs except the following.
                                 portTruckAllowedVlanRemove 1.3.6.1.4.1.6339.100.3.12.1.5 octet string read-write
Remove VLANs from the current list.
                                 portTruckAllowedVlanAll 1.3.6.1.4.1.6339.100.3.12.1.6 integer read-write
Allow all(1) vlans or none vlans. Enumeration: 'none': 0, 'all': 1.
                       portHybridTaggedAllowedVlanTable 1.3.6.1.4.1.6339.100.3.13 no-access
Truck port alllowed vlan table
                             portHybridTaggedAllowedVlanEntry 1.3.6.1.4.1.6339.100.3.13.1 no-access
Truck port alllowed vlan entry
                                 portHybridTaggedPortIndex 1.3.6.1.4.1.6339.100.3.13.1.1 integer no-access
port index of Hybrid mode
                                 portHybridTaggedAllowedVlan 1.3.6.1.4.1.6339.100.3.13.1.2 octet string read-write
VLAN IDs of the allowed VLANs when this port is in hybrid mode.
                                 portHybridTaggedAllowedVlanAdd 1.3.6.1.4.1.6339.100.3.13.1.3 octet string read-write
Add VLANs to the current list.
                                 portHybridTaggedAllowedVlanExcept 1.3.6.1.4.1.6339.100.3.13.1.4 octet string read-write
All VLANs except the following.
                                 portHybridTaggedAllowedVlanRemove 1.3.6.1.4.1.6339.100.3.13.1.5 octet string read-write
Remove VLANs from the current list.
                                 portHybridTaggedAllowedVlanAll 1.3.6.1.4.1.6339.100.3.13.1.6 integer read-write
allow all(1) vlans or none vlans. Enumeration: 'none': 0, 'all': 1.
                       portHybridUntaggedAllowedVlanTable 1.3.6.1.4.1.6339.100.3.14 no-access
Truck port alllowed vlan table
                             portHybridUntaggedAllowedVlanEntry 1.3.6.1.4.1.6339.100.3.14.1 no-access
Truck port alllowed vlan entry
                                 portHybridUntaggedPortIndex 1.3.6.1.4.1.6339.100.3.14.1.1 integer no-access
port index of Hybrid mode
                                 portHybridUntaggedAllowedVlan 1.3.6.1.4.1.6339.100.3.14.1.2 octet string read-write
VLAN IDs of the allowed VLANs when this port is in hybrid mode.
                                 portHybridUntaggedAllowedVlanAdd 1.3.6.1.4.1.6339.100.3.14.1.3 octet string read-write
Add VLANs to the current list.
                                 portHybridUntaggedAllowedVlanExcept 1.3.6.1.4.1.6339.100.3.14.1.4 octet string read-write
All VLANs except the following.
                                 portHybridUntaggedAllowedVlanRemove 1.3.6.1.4.1.6339.100.3.14.1.5 octet string read-write
Remove VLANs from the current list.
                                 portHybridUntaggedAllowedVlanAll 1.3.6.1.4.1.6339.100.3.14.1.6 integer read-write
allow all(1) vlans or none vlans. Enumeration: 'none': 0, 'all': 1.
                   priIpConfig 1.3.6.1.4.1.6339.100.4
                       netDefaultGateway 1.3.6.1.4.1.6339.100.4.1 ipaddress read-write
The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
                       ipHttpState 1.3.6.1.4.1.6339.100.4.2 integer read-write
Web server on-off. Enumeration: 'enable': 1, 'disable': 0.
                       iPAddrTable 1.3.6.1.4.1.6339.100.4.3 no-access
A table of iPAddrEntry.
                           iPAddrEntry 1.3.6.1.4.1.6339.100.4.3.1 no-access
A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is composed of the ifIndex assigned to the corresponding interface.
                               iPAddrVid 1.3.6.1.4.1.6339.100.4.3.1.1 integer no-access
The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table.
                               iPAddrIPAddress 1.3.6.1.4.1.6339.100.4.3.1.2 ipaddress no-access
The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
                               iPAddrSubnetMask 1.3.6.1.4.1.6339.100.4.3.1.3 ipaddress read-only
The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
                               iPAddrPrimaryInterface 1.3.6.1.4.1.6339.100.4.3.1.4 integer read-only
Whether this is a primary interface. Enumeration: 'primary': 0, 'secondary': 1.
                               iPAddrStatus 1.3.6.1.4.1.6339.100.4.3.1.5 integer read-only
Now state. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                       interfaceTable 1.3.6.1.4.1.6339.100.4.4 no-access
A table of interfaceEntry.
                           interfaceEntry 1.3.6.1.4.1.6339.100.4.4.1 no-access
A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty. The index is composed of the ifIndex assigned to the corresponding interface.
                               intfacetype 1.3.6.1.4.1.6339.100.4.4.1.1 integer no-access
The Type of interface. Now support(1)vintf and (2)loopback. Enumeration: 'vintf': 1, 'tunnel': 3, 'loopback': 2.
                               intfaceID 1.3.6.1.4.1.6339.100.4.4.1.2 integer no-access
The Number of interface. exp:intfacetype(1),interfaceID(2) means interface vlan 2. if intfacetype(2) interfaceID(4) means interface loopback4. if intfacetype(3) interfaceID(5) means interface Tunnel5.
                               intfaceIndex 1.3.6.1.4.1.6339.100.4.4.1.3 integer read-only
The Index of interface.
                               intfaceStatus 1.3.6.1.4.1.6339.100.4.4.1.5 integer read-only
Now state. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                   priVlanConfig 1.3.6.1.4.1.6339.100.5
                       vlanInfoTable 1.3.6.1.4.1.6339.100.5.1 no-access
A table containing current configuration information for each VLAN currently configured into the device by (local or network) management.
                           vlanInfoEntry 1.3.6.1.4.1.6339.100.5.1.1 no-access
Static information for a VLAN configured into the device by (local or network) management.
                               vlanID 1.3.6.1.4.1.6339.100.5.1.1.1 integer no-access
This value is vlan's ID.
                               vlanName 1.3.6.1.4.1.6339.100.5.1.1.2 displaystring read-only
which may be used to identify the VLAN.
                               vlanPortNumber 1.3.6.1.4.1.6339.100.5.1.1.3 integer read-only
The sum of vlan's ports.
                               vlanRowStatus 1.3.6.1.4.1.6339.100.5.1.1.4 integer read-only
This object indicates the status of this entry. Enumeration: 'active': 1, 'destroy': 2.
                       mvlanInfoTable 1.3.6.1.4.1.6339.100.5.2 no-access
A table containing current configuration information for Multicast VLAN .
                           mvlanInfoEntry 1.3.6.1.4.1.6339.100.5.2.1 no-access
Static information for Multicast VLAN configured into the device by (local or network) management.
                               mvlanID 1.3.6.1.4.1.6339.100.5.2.1.1 integer no-access
This value is mvlan's ID.
                               mvlanStatus 1.3.6.1.4.1.6339.100.5.2.1.2 integer read-write
the status of mVLAN:enable(1) to active a mvlanID;disable(0) is to destroy a mvlanID. Enumeration: 'enable': 1, 'disable': 0.
                               mvlanAssoVlanList 1.3.6.1.4.1.6339.100.5.2.1.3 displaystring read-write
configure vlans association with multicast Vlan,such as'3-4'or '2,5,6',set or unset by Configuring mvlanAssoVlanStatus; geting vlans which associating with multicast Vlan .
                               mvlanAssoVlanStatus 1.3.6.1.4.1.6339.100.5.2.1.4 integer read-write
the status of mvlanAssoVlan:enable(1) to enable multicast Vlan association with Vlan; disable(0) is to disable multicast Vlan association with Vlan. Enumeration: 'enable': 1, 'disable': 0.
                               mvlanMode 1.3.6.1.4.1.6339.100.5.2.1.5 integer read-write
configure mode: when no configration,Default: 0. Enumeration: 'default': 0, 'compatible': 2, 'dynamic': 1.
                       mvlanPortInfoTable 1.3.6.1.4.1.6339.100.5.3 no-access
A table containing current configuration information for each Multicast VLAN .
                           mvlanPortInfoEntry 1.3.6.1.4.1.6339.100.5.3.1 no-access
Static information for Multicast VLAN configured into the device by (local or network) management.
                               mvlanVId 1.3.6.1.4.1.6339.100.5.3.1.1 integer no-access
This value is mvlan's ID.
                               mvlanPortIndex 1.3.6.1.4.1.6339.100.5.3.1.2 integer no-access
Mvlan's port index.
                               mvlanAssoPortTagid 1.3.6.1.4.1.6339.100.5.3.1.3 integer read-write
tagId of portIndex association with multicast Vlan,Default:0.if port needn't Tagid, set portIndex association with mvlanVId only.
                               mvlanPortStatus 1.3.6.1.4.1.6339.100.5.3.1.4 integer read-write
the status of mvlanPortStatus:enable(1) to enable port association with multicast Vlan; disable(0) is to disable port association with multicast Vlan. Enumeration: 'enable': 1, 'disable': 0.
                       vlanFlowCounterTable 1.3.6.1.4.1.6339.100.5.4 no-access
A table containing flow counters according to vlanid,in/out direction, containing unicast,multicast and broadcast flow.
                           vlanFlowCounterEntry 1.3.6.1.4.1.6339.100.5.4.1 no-access
Flow counters on vlan for in/out ports.
                               vlanFCVlanID 1.3.6.1.4.1.6339.100.5.4.1.1 integer no-access
This value is vlan's ID.
                               vlanInOctets 1.3.6.1.4.1.6339.100.5.4.1.2 counter64 read-only
The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctets.
                               vlanInUcastPkts 1.3.6.1.4.1.6339.100.5.4.1.3 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts.
                               vlanInMulticastPkts 1.3.6.1.4.1.6339.100.5.4.1.4 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifInMulticastPkts.
                               vlanInBroadcastPkts 1.3.6.1.4.1.6339.100.5.4.1.5 counter64 read-only
The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts.
                               vlanOutOctets 1.3.6.1.4.1.6339.100.5.4.1.6 counter64 read-only
The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of ifOutOctets.
                               vlanOutUcastPkts 1.3.6.1.4.1.6339.100.5.4.1.7 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutUcastPkts.
                               vlanOutMulticastPkts 1.3.6.1.4.1.6339.100.5.4.1.8 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. This object is a 64-bit version of ifOutMulticastPkts.
                               vlanOutBroadcastPkts 1.3.6.1.4.1.6339.100.5.4.1.9 counter64 read-only
The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-bit version of ifOutBroadcastPkts.
                               clearVlanFlowCounter 1.3.6.1.4.1.6339.100.5.4.1.10 integer read-write
Clear flow counter. Enumeration: 'enable': 1, 'disable': 0.
                   priJumblyStacking 1.3.6.1.4.1.6339.100.6
                       sysStackUnitNumber 1.3.6.1.4.1.6339.100.6.1 integer read-only
the number of the stacked units.
                       jumblyStackingInfoTable 1.3.6.1.4.1.6339.100.6.2 no-access
Table of descriptive and status information about jumbly stacking in this system.
                           jumblyStackingInfoEntry 1.3.6.1.4.1.6339.100.6.2.1 no-access
An entry in the table, containing information about stacking switch in this system.
                               stackingUnitIndex 1.3.6.1.4.1.6339.100.6.2.1.1 integer read-only
This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.
                               swHardwareVersion 1.3.6.1.4.1.6339.100.6.2.1.2 displaystring read-only
The text string denoting the version of the hardware.
                               swSoftwareVersion 1.3.6.1.4.1.6339.100.6.2.1.3 displaystring read-only
The text string denoting the version of the software.
                               swCPUMac 1.3.6.1.4.1.6339.100.6.2.1.4 macaddress read-only
the Mac address of the machine.
                               swType 1.3.6.1.4.1.6339.100.6.2.1.5 displaystring read-only
Type of this switch.
                   priUamSecurityPortMib 1.3.6.1.4.1.6339.100.7
                       portSecurityTable 1.3.6.1.4.1.6339.100.7.1 no-access
The table of port security
                           portSecurityEntry 1.3.6.1.4.1.6339.100.7.1.1 no-access
An entry in the port security table.
                               psPortIndex 1.3.6.1.4.1.6339.100.7.1.1.1 integer no-access
A unique value for each port
                               psPortSecurity 1.3.6.1.4.1.6339.100.7.1.1.2 integer read-write
enable or disable mac bind on this port Enumeration: 'enable': 1, 'disable': 0.
                               psSecuritytSaticMacAdd 1.3.6.1.4.1.6339.100.7.1.1.3 macaddress read-write
bind Security mac address on this port
                               psSecurityStaticMacDel 1.3.6.1.4.1.6339.100.7.1.1.4 macaddress read-write
delete Security mac address on this port
                               psSecurityPortLock 1.3.6.1.4.1.6339.100.7.1.1.5 integer read-write
lock or unlock this port Enumeration: 'lock': 1, 'unlock': 0.
                               psSecurityPortMax 1.3.6.1.4.1.6339.100.7.1.1.6 integer read-write
Maximum secure addrs on this port
                               psSecurityPortConvertmac 1.3.6.1.4.1.6339.100.7.1.1.7 integer read-write
convert dynamic mac to security mac
                               psSecurityPortLocktimer 1.3.6.1.4.1.6339.100.7.1.1.8 integer read-write
lock timer on this port
                       securityMacPortTable 1.3.6.1.4.1.6339.100.7.2 no-access
Table of descriptive and status information about security port
                           securityMacPortEntry 1.3.6.1.4.1.6339.100.7.2.1 no-access
An entry in the security mac port table.
                               secPortIndex 1.3.6.1.4.1.6339.100.7.2.1.1 integer read-only
A unique value for each port
                               secMacAdress 1.3.6.1.4.1.6339.100.7.2.1.2 macaddress read-only
Mac adress bind on this port
                               secVid 1.3.6.1.4.1.6339.100.7.2.1.3 integer read-only
vlan id of this port(pvid)
                   priIgmpSnoopingMib 1.3.6.1.4.1.6339.100.8
                       priIgmpSnoopingGlobalEnable 1.3.6.1.4.1.6339.100.8.1 integer read-write
Enable or disable the IgmpSnooping algorithm in the switch. Enumeration: 'enable': 1, 'disable': 0.
                       priIgmpSnoopingVlanTable 1.3.6.1.4.1.6339.100.8.2 no-access
IopgmpSnoing configuration in vlan.
                           priIgmpSnoopingEntry 1.3.6.1.4.1.6339.100.8.2.1 no-access
IgmpSnooping confition in vlan.
                               priIgmpSnoopingvlanID 1.3.6.1.4.1.6339.100.8.2.1.1 integer no-access
This value is vlan's ID.
                               priIgmpSnoopingvlanEnable 1.3.6.1.4.1.6339.100.8.2.1.2 integer read-write
Enable or disable the IgmpSnooping in the switch.Default:0 Enumeration: 'enable': 1, 'disable': 0.
                               priIgmpSnoopingleave 1.3.6.1.4.1.6339.100.8.2.1.3 integer read-write
Enable or disable the immediate leave config.Default:0 Enumeration: 'immediate-leave': 1, 'no-immediate-leave': 0.
                               priIgmpSnoopingL2gen 1.3.6.1.4.1.6339.100.8.2.1.4 integer read-write
Enable or disable the l2-general-querier config.Default:0 Enumeration: 'no-l2-general-querier': 0, 'l2-general-querier': 1.
                               priIgmpSnoopingGroupNum 1.3.6.1.4.1.6339.100.8.2.1.5 integer read-write
set the maximum IGMP group the port can join
                               priIgmpSnoopingSourceNum 1.3.6.1.4.1.6339.100.8.2.1.6 integer read-write
set the maximum source number
                               priIgmpSnoopingPort 1.3.6.1.4.1.6339.100.8.2.1.7 displaystring read-only
Get static mrouter port of vlan. ethernet: Name of Ethernet port ifname: Name of interface port-channel: Port aggregation.
                               priIgmpSnoopingPortTime 1.3.6.1.4.1.6339.100.8.2.1.8 integer read-write
Configure this survive time of mrouter port.Default: 255s
                               priIgmpSnoopingQueryInterval 1.3.6.1.4.1.6339.100.8.2.1.9 integer read-write
Configure this query interval. Default: 125s
                               priIgmpSnoopingQueryMrsp 1.3.6.1.4.1.6339.100.8.2.1.10 integer read-write
Configure the maximum query response period. Default: 10s
                               priIgmpSnoopingQueryRobustness 1.3.6.1.4.1.6339.100.8.2.1.11 integer read-write
Configure the query robustness.Default: 2
                               priIgmpSnoopingSuppression 1.3.6.1.4.1.6339.100.8.2.1.12 integer read-write
Configure the suppression query time.Default: 255s
                       priIgmpSnoopingBindTable 1.3.6.1.4.1.6339.100.8.3 no-access
IgmpSnoing bind configuration.
                           priIgmpSnoopingBindEntry 1.3.6.1.4.1.6339.100.8.3.1 no-access
IgmpSnooping bind configuration.
                               priIgmpSnoopingVlanID 1.3.6.1.4.1.6339.100.8.3.1.1 integer no-access
This value is vlan's ID.
                               priIgmpSnoopingGroupAddress 1.3.6.1.4.1.6339.100.8.3.1.2 ipaddress no-access
This value is group's ip address.
                               priIgmpSnoopingPortBitmap 1.3.6.1.4.1.6339.100.8.3.1.3 octet string read-only
Port's bitmap.
                       priIgmpSnoopingLimitPortTable 1.3.6.1.4.1.6339.100.8.4 no-access
IopgmpSnoing limits configuration per port in vlan.
                           priIgmpSnoopingLimitPortEntry 1.3.6.1.4.1.6339.100.8.4.1 no-access
IgmpSnooping limits confition per port in vlan.
                               priIgmpSnoopingLimitVlanID 1.3.6.1.4.1.6339.100.8.4.1.1 integer no-access
This value is vlan's ID which enable ip igmp snooping.
                               priIgmpSnoopingLimitPortIndex 1.3.6.1.4.1.6339.100.8.4.1.2 integer no-access
This value is port's Index.
                               priIgmpSnoopingLimitPortGroupNum 1.3.6.1.4.1.6339.100.8.4.1.3 integer read-write
set the maximum IGMP group the port can join.Default:FFFFFFFF, if only set source_num, when geting ,the result is -1(FFFFFFFF)
                               priIgmpSnoopingLimitPortSourceNum 1.3.6.1.4.1.6339.100.8.4.1.4 integer read-write
set the maximum source number the port can join.Default:FFFFFFFF, if only set group_num, when geting ,the result is -1(FFFFFFFF)
                               priIgmpSnoopingLimitPortStrategy 1.3.6.1.4.1.6339.100.8.4.1.5 integer read-write
configure the strategy over limit. Enumeration: 'drop': 2, 'replace': 1.
                               priIgmpSnoopingLimitPortStatus 1.3.6.1.4.1.6339.100.8.4.1.6 integer read-write
the status of limitPort:enable(1) to enable value of limitation; disable(0) is to disable value of limitation. Enumeration: 'enable': 1, 'disable': 0.
                   priQinQmib 1.3.6.1.4.1.6339.100.9
                       dot1qTunnelTable 1.3.6.1.4.1.6339.100.9.1 no-access
port of qinq tunnel function list
                           dot1qTunnelEntry 1.3.6.1.4.1.6339.100.9.1.1 no-access
configure of dot1qTunnel
                               qinqPortIndex 1.3.6.1.4.1.6339.100.9.1.1.1 integer no-access
port index
                               tunnelPortEnable 1.3.6.1.4.1.6339.100.9.1.1.2 integer read-write
Enable or disable the dot1q-tunnel in this port. Enumeration: 'enable': 1, 'disable': 0.
                               tunnelPortType 1.3.6.1.4.1.6339.100.9.1.1.3 integer read-write
Protocol type of trunk port(TPID)(exp:33024(0x8100)/37120(0x9100)/37376(0x9200)).
                       vlanTranslationTable 1.3.6.1.4.1.6339.100.9.2 no-access
VLAN translation basic config.
                           vlanTranslationEntry 1.3.6.1.4.1.6339.100.9.2.1 no-access
VLAN translation
                               translatPortIndex 1.3.6.1.4.1.6339.100.9.2.1.1 integer no-access
Index of Port.
                               translationEnable 1.3.6.1.4.1.6339.100.9.2.1.2 integer read-write
if the port can be done translation function Enumeration: 'enable': 1, 'disable': 0.
                               translationDropType 1.3.6.1.4.1.6339.100.9.2.1.3 integer read-write
when VLAN-translation missed, drop packet mode Enumeration: 'both': 3, 'noBoth': 6, 'noOut': 5, 'in': 1, 'noIn': 4, 'out': 2.
                       vlanTranslationTypeTable 1.3.6.1.4.1.6339.100.9.3 no-access
port VLAN-translation of translation relation list
                           vlanTranslationTypeEntry 1.3.6.1.4.1.6339.100.9.3.1 no-access
port VLAN translation of translation relation,index is port index and translation sort
                               translatPortTypeIndex 1.3.6.1.4.1.6339.100.9.3.1.1 integer read-only
port index
                               translationType 1.3.6.1.4.1.6339.100.9.3.1.2 integer read-only
translation type. in:input translation; out:output translation. Enumeration: 'out': 2, 'in': 1.
                               translationOldVlanid 1.3.6.1.4.1.6339.100.9.3.1.3 integer read-only
vlantranslation pre-vid
                               translationNewVlanid 1.3.6.1.4.1.6339.100.9.3.1.4 integer read-only
the new vid
                               translationTypeStatus 1.3.6.1.4.1.6339.100.9.3.1.5 integer read-only
accession/delete VLAN-translation relation Enumeration: 'active': 1, 'destroy': 2.
                   prisecurity 1.3.6.1.4.1.6339.100.10
                         acl 1.3.6.1.4.1.6339.100.10.1
                             fireWall 1.3.6.1.4.1.6339.100.10.1.1
                                 fireWallEnable 1.3.6.1.4.1.6339.100.10.1.1.1 integer read-write
firewall on-off Enumeration: 'enable': 1, 'disable': 0.
                             timeRange 1.3.6.1.4.1.6339.100.10.1.2
                                 timeRangeMapTable 1.3.6.1.4.1.6339.100.10.1.2.1 no-access
timeRange Map Table
                                     timeRangeMapEntry 1.3.6.1.4.1.6339.100.10.1.2.1.1 no-access
timeRange Map Entry
                                         timeRangeMapIndex 1.3.6.1.4.1.6339.100.10.1.2.1.1.1 integer read-only
TimeRange Map index,the range of it is 1-(2^32-1).
                                         timeRangeMapName 1.3.6.1.4.1.6339.100.10.1.2.1.1.2 displaystring read-write
TimeRange Map name
                                         timeRangeMapStatus 1.3.6.1.4.1.6339.100.10.1.2.1.1.3 integer read-write
TimeRange Map status Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                 timeRangeTable 1.3.6.1.4.1.6339.100.10.1.2.2 no-access
timeRange Table
                                     timeRangeEntry 1.3.6.1.4.1.6339.100.10.1.2.2.1 no-access
timeRange Entry
                                         timeRangeIndex 1.3.6.1.4.1.6339.100.10.1.2.2.1.1 integer read-only
TimeRange index,the allowed range is 1 to 1000.
                                         timeRangeSubIndex 1.3.6.1.4.1.6339.100.10.1.2.2.1.2 integer read-only
TimeRange sub index,the allowed range is 1 to 1000.
                                         timeRangeType 1.3.6.1.4.1.6339.100.10.1.2.2.1.3 integer read-write
TimeRange type Enumeration: 'periodic': 2, 'absolute': 1.
                                         timeRangeStartWeek 1.3.6.1.4.1.6339.100.10.1.2.2.1.4 bits read-write
configurate the start week,for example: f8 means monday+tuesday+wednesday+thurday+friday, the lowest bit is not used,so fe is the biggest. Bits: 'monday': 0, 'tuesday': 1, 'friday': 4, 'wednesday': 2, 'thursday': 3, 'sunday': 6, 'saturday': 5.
                                         timeRangeStartDate 1.3.6.1.4.1.6339.100.10.1.2.2.1.5 displaystring read-write
configurate the start Date,for example YYYY.MM.DD .
                                         timeRangeStartTime 1.3.6.1.4.1.6339.100.10.1.2.2.1.6 displaystring read-write
configurate the start clock,for example HH:MM:SS.
                                         timeRangeEndWeek 1.3.6.1.4.1.6339.100.10.1.2.2.1.7 bits read-write
configurate the end week,for example: f8 means monday+tuesday+wednesday+thurday+friday, the lowest bit is not used,so fe is the biggest. Bits: 'monday': 0, 'tuesday': 1, 'friday': 4, 'wednesday': 2, 'thursday': 3, 'sunday': 6, 'saturday': 5.
                                         timeRangeEndDate 1.3.6.1.4.1.6339.100.10.1.2.2.1.8 displaystring read-write
configurate the end date,for example YYYY.MM.DD.
                                         timeRangeEndTime 1.3.6.1.4.1.6339.100.10.1.2.2.1.9 displaystring read-write
configurate the end clock,for example HH:MM:SS.
                                         timeRangeStatus 1.3.6.1.4.1.6339.100.10.1.2.2.1.10 integer read-write
status of timeRangeMapTable Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             aclConfig 1.3.6.1.4.1.6339.100.10.1.3
                                 numAclGroupTable 1.3.6.1.4.1.6339.100.10.1.3.1 no-access
this table is used for building a num-acl list.
                                     numAclGroupEntry 1.3.6.1.4.1.6339.100.10.1.3.1.1 no-access
numAclGroup Table's Entry
                                         numAclGroupAclIndex 1.3.6.1.4.1.6339.100.10.1.3.1.1.1 integer read-only
the index of number acl,ip standard <1>,ip extern <100>,mac standard <700>, mac extern <1100>,ipv6 standard <500> ipv6 extern <600>.
                                         numAclGroupMatchOrder 1.3.6.1.4.1.6339.100.10.1.3.1.1.2 integer read-write
value 0 means Acl rule's priority is automatically configured, value 1 means Acl rule's priority is manually configured, but now it's not supported. Enumeration: 'configPriority': 1, 'autoPriority': 0.
                                         numAclGroupSubitemNum 1.3.6.1.4.1.6339.100.10.1.3.1.1.3 integer read-only
the Number of one acl's rule.
                                         numAclGroupStatus 1.3.6.1.4.1.6339.100.10.1.3.1.1.4 integer read-write
the status of number acl. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                 nameAclGroupTable 1.3.6.1.4.1.6339.100.10.1.3.2 no-access
this table is used for building a name-acl list and mapping a string of named acl to a value of number, when you want to config name-acl list,you must map at here.
                                     nameAclGroupEntry 1.3.6.1.4.1.6339.100.10.1.3.2.1 no-access
nameAclGroup Table's Entry
                                         nameAclGroupAclIndex 1.3.6.1.4.1.6339.100.10.1.3.2.1.1 integer read-only
the index of name acl,the range starts at 20000.
                                         nameAclGroupAclName 1.3.6.1.4.1.6339.100.10.1.3.2.1.2 displaystring read-write
the name of name-acl.
                                         nameAclGroupAclType 1.3.6.1.4.1.6339.100.10.1.3.2.1.3 integer read-write
the type of name acl. Enumeration: 'ipv6Extern': 7, 'ipExtern': 1, 'macStandard': 2, 'macIpExtern': 4, 'macIpStandard': 5, 'ipStandard': 0, 'ipv6Standard': 6, 'macExtern': 3.
                                         nameAclGroupMatchOrder 1.3.6.1.4.1.6339.100.10.1.3.2.1.4 integer read-write
value 0 means Acl rule's priority is automatically configured, value 1 means Acl rule's priority is manually configured, but now it's not supported. Enumeration: 'configPriority': 1, 'autoPriority': 0.
                                         nameAclGroupSubitemNum 1.3.6.1.4.1.6339.100.10.1.3.2.1.5 integer read-only
the Number of one acl's rule.
                                         nameAclGroupStatus 1.3.6.1.4.1.6339.100.10.1.3.2.1.6 integer read-write
the status of nameAclGroupTable. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                 ipStandardAclTable 1.3.6.1.4.1.6339.100.10.1.3.3 no-access
config ip Standard Acl
                                     ipStandardAclEntry 1.3.6.1.4.1.6339.100.10.1.3.3.1 no-access
ip standard Table's Entry
                                         ipStandardIndex 1.3.6.1.4.1.6339.100.10.1.3.3.1.1 integer read-only
The index of ip-standard-acl group.
                                         ipStandardSubIndex 1.3.6.1.4.1.6339.100.10.1.3.3.1.2 integer read-only
The index of ip-standard-acl rule.
                                         ipStandardPriority 1.3.6.1.4.1.6339.100.10.1.3.3.1.3 integer read-write
The priority of standard ip acl's rule,it is not supported now.
                                         ipStandardAct 1.3.6.1.4.1.6339.100.10.1.3.3.1.4 integer read-write
The action of acl rule. Enumeration: 'deny': 0, 'permit': 1.
                                         ipStandardSrcIp 1.3.6.1.4.1.6339.100.10.1.3.3.1.5 ipaddress read-write
Source IP-address of basic acl rule.
                                         ipStandardSrcIpWild 1.3.6.1.4.1.6339.100.10.1.3.3.1.6 ipaddress read-write
Source IP-address wild of basic acl rule.
                                         ipStandardStatus 1.3.6.1.4.1.6339.100.10.1.3.3.1.7 integer read-write
status of the ipStandardAclTable. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                 ipExternAclTable 1.3.6.1.4.1.6339.100.10.1.3.4 no-access
ip extern Acl Table
                                     ipExternAclEntry 1.3.6.1.4.1.6339.100.10.1.3.4.1 no-access
ip extern Table's Entry
                                         ipExternIndex 1.3.6.1.4.1.6339.100.10.1.3.4.1.1 integer read-only
The index of ip-Extern-acl group .
                                         ipExternSubIndex 1.3.6.1.4.1.6339.100.10.1.3.4.1.2 integer read-only
The index of ip-Extern-acl rule .
                                         ipExternPriority 1.3.6.1.4.1.6339.100.10.1.3.4.1.3 integer read-write
The priority of extern ip acl's rule,it is not supported now.
                                         ipExternAct 1.3.6.1.4.1.6339.100.10.1.3.4.1.4 integer read-write
The action of acl rule. Enumeration: 'deny': 0, 'permit': 1.
                                         ipExternProtocal 1.3.6.1.4.1.6339.100.10.1.3.4.1.5 integer read-write
The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 0 matches every IP packet. For example : 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation, 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH, 88 is EIGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP, 103 is PIMv2, 108 is PCP.
                                         ipExternSrcIp 1.3.6.1.4.1.6339.100.10.1.3.4.1.6 ipaddress read-write
Source IP-address of advanced acl rule,for example 10.1.1.0 .
                                         ipExternSrcIpWild 1.3.6.1.4.1.6339.100.10.1.3.4.1.7 ipaddress read-write
Source IP-address wild of advanced acl rule,for example 0.0.0.255 .
                                         ipExternDstIp 1.3.6.1.4.1.6339.100.10.1.3.4.1.8 ipaddress read-write
Destination IP-address of advanced acl rule,for example 10.1.1.0 .
                                         ipExternDstIpWild 1.3.6.1.4.1.6339.100.10.1.3.4.1.9 ipaddress read-write
Destination IP-address wild of advanced acl rule,for example 0.0.0.255 .
                                         ipExternTimeRangeName 1.3.6.1.4.1.6339.100.10.1.3.4.1.10 displaystring read-write
The Time-range of advanced acl rule.
                                         ipExternSrcOp 1.3.6.1.4.1.6339.100.10.1.3.4.1.11 integer read-write
Indicates how a packet's source TCP/UDP port number is to be compared. If the numIpExternProtocol object in the same row does not indicate TCP or UDP, this object has to be 'noOperator(0)' and cannot be changed while this row is active, i.e., the value of numIpExternStatus in the same row has the value 'active(1)'. 'noOperator(0)', which is the default value, means that no comparison is to be made with the source TCP/UDP port number. eq(1) means equal, This operators are using the ipExternSrcPort1 object as an operand which is the only one needed. range(3) means that it compares the port value between two numbers, so this operator needs 2 operands. One operand is the starting port number of the range which is ipExternSrcPort1 object, and the other operand is the ending port number of the range which the ipExternSrcPort2 object is in. Now support(3)eq,(5)range. Enumeration: 'range': 2, 'eq': 1, 'noOperator': 0.
                                         ipExternSrcPort1 1.3.6.1.4.1.6339.100.10.1.3.4.1.12 integer read-write
The source port number of the TCP or UDP protocol. If the numIpExternSrcOP object in the same row is range(5), this object will be the starting port number of the port range. This object cannot be configured if numIpExternStatus in the same row is active(1) or numIpExternSrcOP in the same row is noOperator(0).
                                         ipExternSrcPort2 1.3.6.1.4.1.6339.100.10.1.3.4.1.13 integer read-write
The source port number of the TCP or UDP protocol. If the numIpExternSrcOP object in the same row is range(5), this object will be the ending port number of the port range. This object cannot be configured if numIpExternStatus in the same row is active(1) or numIpExternSrcOP in the same row is not range(5).
                                         ipExternDstOp 1.3.6.1.4.1.6339.100.10.1.3.4.1.14 integer read-write
Indicates how a packet's Destination TCP/UDP port number is to be compared. If the numIpExternProtocol object in the same row does not indicate TCP or UDP, this object has to be 'noOperator(0)' and cannot be changed while this row is active, i.e., the value of numIpExternStatus in the same row has the value 'active(1)'. 'noOperator(0)', which is the default value, means that no comparison is to be made with the source TCP/UDP port number. eq(1)means equal, This operators are using the numIpExternDestPort object as an operand which is the only one needed. range(5) means that it compares the port value between two numbers, so this operator needs 2 operands. One operand is the starting port number of the range which is numIpExternSrcPort object, and the other operand is the ending port number of the range which the numIpExternDestPortRange object is in. Now support(3)eq,(5)range. Enumeration: 'range': 2, 'eq': 1, 'noOperator': 0.
                                         ipExternDstPort1 1.3.6.1.4.1.6339.100.10.1.3.4.1.15 integer read-write
The source port number of the TCP or UDP protocol. If the numIpExternDestOP object in the same row is range(5), this object will be the starting port number of the port range. This object cannot be configured if numIpExternStatus in the same row is active(1) or numIpExternDestOP in the same row is noOperator(0).
                                         ipExternDstPort2 1.3.6.1.4.1.6339.100.10.1.3.4.1.16 integer read-write
The source port number of the TCP or UDP protocol. If the numIpExternDestOP object in the same row is range(5), this object will be the ending port number of the port range. This object cannot be configured if numIpExternStatus in the same row is active(1) or numIpExternDestOP in the same row is not range(5).
                                         ipExternStatus 1.3.6.1.4.1.6339.100.10.1.3.4.1.17 integer read-write
now state of the access-list. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                 macStandardAclTable 1.3.6.1.4.1.6339.100.10.1.3.5 no-access
mac Standard Acl Table
                                     macStandardAclEntry 1.3.6.1.4.1.6339.100.10.1.3.5.1 no-access
mac standard Table's Entry
                                         macStandardIndex 1.3.6.1.4.1.6339.100.10.1.3.5.1.1 integer read-only
The index of mac-standard-acl group .
                                         macStandardSubIndex 1.3.6.1.4.1.6339.100.10.1.3.5.1.2 integer read-only
The index of mac-standard-acl rule .
                                         macStandardPriority 1.3.6.1.4.1.6339.100.10.1.3.5.1.3 integer read-write
The priority of standard mac acl's rule,it is not supported now.
                                         macStandardAct 1.3.6.1.4.1.6339.100.10.1.3.5.1.4 integer read-write
The action of acl rule. Enumeration: 'deny': 0, 'permit': 1.
                                         macStandardSrcMac 1.3.6.1.4.1.6339.100.10.1.3.5.1.5 displaystring read-write
Source Mac-address of basic acl rule,for example : ff-ff-ff-ff-ff-00.
                                         macStandardSrcMacWild 1.3.6.1.4.1.6339.100.10.1.3.5.1.6 displaystring read-write
Source Mac-address's anti-mask of basic acl rule,for example : ff-ff-ff-ff-00-00.
                                         macStandardStatus 1.3.6.1.4.1.6339.100.10.1.3.5.1.7 integer read-write
status of the access-list. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                 macExternAclTable 1.3.6.1.4.1.6339.100.10.1.3.6 no-access
mac extern Acl Table
                                     macExternAclEntry 1.3.6.1.4.1.6339.100.10.1.3.6.1 no-access
mac extern Table's Entry
                                         macExternIndex 1.3.6.1.4.1.6339.100.10.1.3.6.1.1 integer read-only
The index of Mac-Extern-acl group.
                                         macExternSubIndex 1.3.6.1.4.1.6339.100.10.1.3.6.1.2 integer read-only
The index of Mac-Extern-acl rule.
                                         macExternPriority 1.3.6.1.4.1.6339.100.10.1.3.6.1.3 integer read-write
The priority of extern mac acl's rule,it is not supported now.
                                         macExternAct 1.3.6.1.4.1.6339.100.10.1.3.6.1.4 integer read-write
The action of acl rule. Enumeration: 'deny': 0, 'permit': 1.
                                         macExternSrcMac 1.3.6.1.4.1.6339.100.10.1.3.6.1.5 displaystring read-write
Source Mac-address of advanced acl rule,for example : ff-ff-ff-ff-ff-00.
                                         macExternSrcMacWild 1.3.6.1.4.1.6339.100.10.1.3.6.1.6 displaystring read-write
Source Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.
                                         macExternDstMac 1.3.6.1.4.1.6339.100.10.1.3.6.1.7 displaystring read-write
Destination Mac-address of advanced acl rule,for example : ff-ff-ff-ff-ff-00.
                                         macExternDstMacWild 1.3.6.1.4.1.6339.100.10.1.3.6.1.8 displaystring read-write
Destination Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.
                                         macExternPacketType 1.3.6.1.4.1.6339.100.10.1.3.6.1.9 integer read-write
Indicates the message type of packets.none(0),untagged-eth2(1), untagged-802.3(2),tagged-eth2(3),tagged-802.3(4)
                                         macExternEtherType 1.3.6.1.4.1.6339.100.10.1.3.6.1.10 integer read-write
Value of the ethertype
                                         macExternEtherTypeWild 1.3.6.1.4.1.6339.100.10.1.3.6.1.11 integer read-write
Anti-mask of the ethertype
                                         macExternCos 1.3.6.1.4.1.6339.100.10.1.3.6.1.12 integer read-write
value of the cos
                                         macExternCosWild 1.3.6.1.4.1.6339.100.10.1.3.6.1.13 integer read-write
Anti-mask of the cos
                                         macExternVlanId 1.3.6.1.4.1.6339.100.10.1.3.6.1.14 integer read-write
vlan id
                                         macExternVlanIdWild 1.3.6.1.4.1.6339.100.10.1.3.6.1.15 integer read-write
Anti-mask of the vlan id
                                         macExternStatus 1.3.6.1.4.1.6339.100.10.1.3.6.1.16 integer read-write
now state of the access-list. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                 ipv6StandardAclTable 1.3.6.1.4.1.6339.100.10.1.3.7 no-access
ipv6 Standard Acl Table
                                     ipv6StandardAclEntry 1.3.6.1.4.1.6339.100.10.1.3.7.1 no-access
ipv6 standard Table's Entry
                                         ipv6StandardIndex 1.3.6.1.4.1.6339.100.10.1.3.7.1.1 integer read-only
The index of ipv6-standard-acl group.
                                         ipv6StandardSubIndex 1.3.6.1.4.1.6339.100.10.1.3.7.1.2 integer read-only
The index of ipv6-standard-acl rule.
                                         ipv6StandardPriority 1.3.6.1.4.1.6339.100.10.1.3.7.1.3 integer read-write
The priority of standard ipv6 acl's rule,it is not supported now.
                                         ipv6StandardAct 1.3.6.1.4.1.6339.100.10.1.3.7.1.4 integer read-write
The action of acl rule. Enumeration: 'deny': 0, 'permit': 1.
                                         ipv6StandardSrcIp 1.3.6.1.4.1.6339.100.10.1.3.7.1.5 displaystring read-write
Source IPV6-address of basic acl rule,for example : 3ffe:506::100.
                                         ipv6StandardSrcPrefixLen 1.3.6.1.4.1.6339.100.10.1.3.7.1.6 integer read-write
Source IPV6-address prefix length of basic acl rule.
                                         ipv6StandardStatus 1.3.6.1.4.1.6339.100.10.1.3.7.1.7 integer read-write
now state of the access-list. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                 ipv6ExternAclTable 1.3.6.1.4.1.6339.100.10.1.3.8 no-access
ipv6 extern Acl Table
                                     ipv6ExternAclEntry 1.3.6.1.4.1.6339.100.10.1.3.8.1 no-access
ipv6 extern Table's Entry
                                         ipv6ExternIndex 1.3.6.1.4.1.6339.100.10.1.3.8.1.1 integer read-write
The index of ipv6-Extern-acl group .
                                         ipv6ExternSubIndex 1.3.6.1.4.1.6339.100.10.1.3.8.1.2 integer read-write
The index of ipv6-Extern-acl rule .
                                         ipv6ExternPriority 1.3.6.1.4.1.6339.100.10.1.3.8.1.3 integer read-write
The priority of extern ipv6 acl's rule,it is not supported now.
                                         ipv6ExternAct 1.3.6.1.4.1.6339.100.10.1.3.8.1.4 integer read-write
The action of acl rule. Enumeration: 'deny': 0, 'permit': 1.
                                         ipv6ExternProtocal 1.3.6.1.4.1.6339.100.10.1.3.8.1.5 integer read-write
The protocol number field in the IP header used to indicate the higher layer protocol as specified . For example : 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation, 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH, 88 is EIGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP, 103 is PIMv2, 108 is PCP
                                         ipv6ExternSrcIp 1.3.6.1.4.1.6339.100.10.1.3.8.1.6 displaystring read-write
Source IPV6-address of advanced acl rule,for example : 3ffe:506::100.
                                         ipv6ExternSrcPreLen 1.3.6.1.4.1.6339.100.10.1.3.8.1.7 integer read-write
Source IP-address prefix length of advanced acl rule.
                                         ipv6ExternDstIp 1.3.6.1.4.1.6339.100.10.1.3.8.1.8 displaystring read-write
Destination IPV6-address of advanced acl rule,for example : 3ffe:506::100.
                                         ipv6ExternDstPreLen 1.3.6.1.4.1.6339.100.10.1.3.8.1.9 integer read-write
Destination IPV6-address prefix length of advanced acl rule.
                                         ipv6ExternTimeRangeName 1.3.6.1.4.1.6339.100.10.1.3.8.1.10 displaystring read-write
The Time-range of advanced acl rule.
                                         ipv6ExternSrcOp 1.3.6.1.4.1.6339.100.10.1.3.8.1.11 integer read-write
Indicates how a packet's source TCP/UDP port number is to be compared. If the ipv6ExternProtocal object in the same row does not indicate TCP or UDP, this object has to be 'noOperator(0)' and cannot be changed while this row is active, i.e., the value of ipv6ExternStatus in the same row has the value 'active(1)'. 'noOperator(0)', which is the default value, means that no comparison is to be made with the source TCP/UDP port number. eq(3) means equal,range(5) means that it compares the port value between two numbers, so this operator needs 2 operands. One operand is the starting port number of the range which is ipv6ExternSrcPort1 object, and the other operand is the ending port number of the range which the ipv6ExternSrcPort2 object is in. Enumeration: 'range': 5, 'eq': 3, 'noOperator': 0.
                                         ipv6ExternSrcPort1 1.3.6.1.4.1.6339.100.10.1.3.8.1.12 integer read-write
The source port number of the TCP or UDP protocol. If the ipv6ExternSrcOp object in the same row is range(5), this object will be the starting port number of the port range. This object cannot be configured if ipv6ExternStatus in the same row is active(1) or ipv6ExternSrcOp in the same row is noOperator(0).
                                         ipv6ExternSrcPort2 1.3.6.1.4.1.6339.100.10.1.3.8.1.13 integer read-write
The source port number of the TCP or UDP protocol. If the ipv6ExternSrcOp object in the same row is range(5), this object will be the ending port number of the port range. This object cannot be configured if ipv6ExternStatus in the same row is active(1) or ipv6ExternSrcOp in the same row is not range(5).
                                         ipv6ExternDstOp 1.3.6.1.4.1.6339.100.10.1.3.8.1.14 integer read-write
Indicates how a packet's Destination TCP/UDP port number is to be compared. If the ipv6ExternProtocal object in the same row does not indicate TCP or UDP, this object has to be 'noOperator(0)' and cannot be changed while this row is active, i.e., the value of ipv6ExternStatus in the same row has the value 'active(1)'. 'noOperator(0)', which is the default value, means that no comparison is to be made with the source TCP/UDP port number. eq(3) means equal,range(5) means that it compares the port value between two numbers, so this operator needs 2 operands. One operand is the starting port number of the range which is ipv6ExternDstPort1 object, and the other operand is the ending port number of the range which the ipv6ExternDstPort2 object is in. Enumeration: 'range': 5, 'eq': 3, 'noOperator': 0.
                                         ipv6ExternDstPort1 1.3.6.1.4.1.6339.100.10.1.3.8.1.15 integer read-write
The Destination port number of the TCP or UDP protocol. If the ipv6ExternDstOp object in the same row is range(5), this object will be the starting port number of the port range. This object cannot be configured if ipv6ExternStatus in the same row is active(1) or ipv6ExternDstOp in the same row is noOperator(0).
                                         ipv6ExternDstPort2 1.3.6.1.4.1.6339.100.10.1.3.8.1.16 integer read-write
The Destination port number of the TCP or UDP protocol. If the ipv6ExternDstOp object in the same row is range(5), this object will be the ending port number of the port range. This object cannot be configured if ipv6ExternStatus in the same row is active(1) or ipv6ExternDstOp in the same row is not range(5).
                                         ipv6ExternStatus 1.3.6.1.4.1.6339.100.10.1.3.8.1.17 integer read-write
status of ipv6ExternAclTable. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                 macIpExternAclTable 1.3.6.1.4.1.6339.100.10.1.3.9 no-access
mac-ip extern Acl Table
                                     macIpExternAclEntry 1.3.6.1.4.1.6339.100.10.1.3.9.1 no-access
mac-ip extern Table's Entry
                                         macIpExternIndex 1.3.6.1.4.1.6339.100.10.1.3.9.1.1 integer read-only
The index of macIp-Extern-acl group .
                                         macIpExternSubIndex 1.3.6.1.4.1.6339.100.10.1.3.9.1.2 integer read-only
The index of macIp-Extern-acl rule .
                                         macIpExternPriority 1.3.6.1.4.1.6339.100.10.1.3.9.1.3 integer read-write
The priority of extern macIp acl's rule,it is not supported now.
                                         macIpExternAct 1.3.6.1.4.1.6339.100.10.1.3.9.1.4 integer read-write
The action of acl rule. Enumeration: 'deny': 0, 'permit': 1.
                                         macIpExternProtocal 1.3.6.1.4.1.6339.100.10.1.3.9.1.5 integer read-write
The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 0 matches every IP packet. For example : 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP encapsulation, 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50 is ESP, 51 is AH, 88 is EIGRP, 89 is OSPF, 94 is KA9Q/NOS compatible IP over IP, 103 is PIMv2, 108 is PCP.
                                         macIpExternSrcMac 1.3.6.1.4.1.6339.100.10.1.3.9.1.6 displaystring read-write
Source Mac-address of advanced acl rule,for example : ff-ff-ff-ff-ff-00.
                                         macIpExternSrcMacWild 1.3.6.1.4.1.6339.100.10.1.3.9.1.7 displaystring read-write
Source Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.
                                         macIpExternDstMac 1.3.6.1.4.1.6339.100.10.1.3.9.1.8 displaystring read-write
Destination Mac-address of advanced acl rule,for example : ff-ff-ff-ff-ff-00.
                                         macIpExternDstMacWild 1.3.6.1.4.1.6339.100.10.1.3.9.1.9 displaystring read-write
Destination Mac-address's anti-mask of advanced acl rule,for example : ff-ff-ff-ff-00-00.
                                         macIpExternSrcIp 1.3.6.1.4.1.6339.100.10.1.3.9.1.10 ipaddress read-write
Source IP-address of advanced acl rule,for example 10.1.1.0 .
                                         macIpExternSrcIpWild 1.3.6.1.4.1.6339.100.10.1.3.9.1.11 ipaddress read-write
Source IP-address wild of advanced acl rule,for example 0.0.0.255 .
                                         macIpExternDstIp 1.3.6.1.4.1.6339.100.10.1.3.9.1.12 ipaddress read-write
Destination IP-address of advanced acl rule,for example 10.1.1.0 .
                                         macIpExternDstIpWild 1.3.6.1.4.1.6339.100.10.1.3.9.1.13 ipaddress read-write
Destination IP-address wild of advanced acl rule,for example 0.0.0.255 .
                                         macIpExternTimeRangeName 1.3.6.1.4.1.6339.100.10.1.3.9.1.14 displaystring read-write
The Time-range of advanced acl rule.
                                         macIpExternSrcOp 1.3.6.1.4.1.6339.100.10.1.3.9.1.15 integer read-write
Indicates how a packet's source TCP/UDP port number is to be compared. If the macIpExternProtocal object in the same row does not indicate TCP or UDP, this object has to be 'noOperator(0)' and cannot be changed while this row is active, i.e., the value of macIpExternStatus in the same row has the value 'active(1)'. 'noOperator(0)', which is the default value, means that no comparison is to be made with the source TCP/UDP port number. eq(3) means equal, This operators are using the macIpExternSrcPort1 object as an operand which is the only one needed. range(5) means that it compares the port value between two numbers, so this operator needs 2 operands. One operand is the starting port number of the range which is macIpExternSrcPort1 object, and the other operand is the ending port number of the range which the macIpExternSrcPort2 object is in. Now support(3)eq,(5)range. Enumeration: 'range': 5, 'eq': 3, 'noOperator': 0.
                                         macIpExternSrcPort1 1.3.6.1.4.1.6339.100.10.1.3.9.1.16 integer read-write
The source port number of the TCP or UDP protocol. If the macIpExternSrcOP object in the same row is range(5), this object will be the starting port number of the port range. This object cannot be configured if macIpExternStatus in the same row is active(1) or numIpExternSrcOP in the same row is noOperator(0).
                                         macIpExternSrcPort2 1.3.6.1.4.1.6339.100.10.1.3.9.1.17 integer read-write
The source port number of the TCP or UDP protocol. If the macIpExternSrcOP object in the same row is range(5), this object will be the ending port number of the port range. This object cannot be configured if numIpExternStatus in the same row is active(1) or macIpExternSrcOP in the same row is not range(5).
                                         macIpExternDstOp 1.3.6.1.4.1.6339.100.10.1.3.9.1.18 integer read-write
Indicates how a packet's Destination TCP/UDP port number is to be compared. If the macIpExternProtocol object in the same row does not indicate TCP or UDP, this object has to be 'noOperator(0)' and cannot be changed while this row is active, i.e., the value of macIpExternStatus in the same row has the value 'active(1)'. 'noOperator(0)', which is the default value, means that no comparison is to be made with the source TCP/UDP port number. eq(3)means equal, This operators are using the macIpExternDstPort object as an operand which is the only one needed. range(5) means that it compares the port value between two numbers, so this operator needs 2 operands. One operand is the starting port number of the range which is macIpExternSrcPort1 object, and the other operand is the ending port number of the range which the macIpExternDstPort2 object is in. Now support(3)eq,(5)range. Enumeration: 'range': 2, 'eq': 1, 'noOperator': 0.
                                         macIpExternDstPort1 1.3.6.1.4.1.6339.100.10.1.3.9.1.19 integer read-write
The source port number of the TCP or UDP protocol. If the macIpExternDstOP object in the same row is range(5), this object will be the starting port number of the port range. This object cannot be configured if macIpExternStatus in the same row is active(1) or macIpExternDstOP in the same row is noOperator(0).
                                         macIpExternDstPort2 1.3.6.1.4.1.6339.100.10.1.3.9.1.20 integer read-write
The source port number of the TCP or UDP protocol. If the macIpExternDstOP object in the same row is range(5), this object will be the ending port number of the port range. This object cannot be configured if numIpExternStatus in the same row is active(1) or macIpExternDstOP in the same row is not range(5).
                                         macIpExternPrecedence 1.3.6.1.4.1.6339.100.10.1.3.9.1.21 integer read-write
The precedence of macIp-Extern-acl .
                                         macIpExternTos 1.3.6.1.4.1.6339.100.10.1.3.9.1.22 integer read-write
The tos of macIp-Extern-acl .
                                         macIpExternStatus 1.3.6.1.4.1.6339.100.10.1.3.9.1.23 integer read-write
state of the access-list. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             aclAttach 1.3.6.1.4.1.6339.100.10.1.4
                                 aclActiveTable 1.3.6.1.4.1.6339.100.10.1.4.1 no-access
bind Acl in port or vlan.
                                     aclActiveEntry 1.3.6.1.4.1.6339.100.10.1.4.1.1 no-access
Entry for aclActiveTable
                                         aclActiveBindType 1.3.6.1.4.1.6339.100.10.1.4.1.1.1 integer read-only
point out the type of position of the bind-acl. Enumeration: 'vlan': 1, 'port': 0.
                                         aclActiveIndex 1.3.6.1.4.1.6339.100.10.1.4.1.1.2 integer read-only
The value of port id or vlan id .
                                         aclActiveType 1.3.6.1.4.1.6339.100.10.1.4.1.1.3 integer read-only
the type of acl. Enumeration: 'ip': 1, 'mac': 3, 'macIp': 5, 'ipv6': 2.
                                         aclActiveDirection 1.3.6.1.4.1.6339.100.10.1.4.1.1.4 integer read-only
the direction of a binding acl. Enumeration: 'in': 1, 'out': 0.
                                         aclActiveAclIndex 1.3.6.1.4.1.6339.100.10.1.4.1.1.5 integer read-write
the value of acl index,you have configured in aclNumAccessGroupTable or aclNameAccessGroupTable.
                                         aclActiveStatistic 1.3.6.1.4.1.6339.100.10.1.4.1.1.6 integer read-write
support traffic statistic or not. Enumeration: 'enable': 1, 'disable': 0.
                                         aclActiveStatus 1.3.6.1.4.1.6339.100.10.1.4.1.1.7 integer read-write
access or delete the bind-acl. Enumeration: 'enable': 1, 'disable': 0.
                                 aclStatisticClearTable 1.3.6.1.4.1.6339.100.10.1.4.2 no-access
clear traffic-statistic in port or vlan.
                                     aclStatisticClearEntry 1.3.6.1.4.1.6339.100.10.1.4.2.1 no-access
entry for aclStatisticClearTable
                                         aclStatisticClearBindType 1.3.6.1.4.1.6339.100.10.1.4.2.1.1 integer read-only
point out the type of position of the bind-acl. Enumeration: 'vlan': 1, 'port': 0.
                                         aclStatisticClearDirection 1.3.6.1.4.1.6339.100.10.1.4.2.1.2 integer read-only
the direction of a binding acl. Enumeration: 'in': 1, 'out': 0.
                                         aclStatisticClearIndex 1.3.6.1.4.1.6339.100.10.1.4.2.1.3 integer read-only
The value of port id or vlan id .
                                         aclStatisticClearStatus 1.3.6.1.4.1.6339.100.10.1.4.2.1.4 integer read-write
clear the bind-acl's traffic-statistic. Enumeration: 'enable': 1, 'disable': 0.
                         sshMgt 1.3.6.1.4.1.6339.100.10.2
                             sshServerStatus 1.3.6.1.4.1.6339.100.10.2.1 integer read-write
The status of Secure Shell Server, set this value to 1 to enable SSH server, set this value to 0 to disable the SSH server. Enumeration: 'enable': 1, 'disable': 0.
                             sshServerVersion 1.3.6.1.4.1.6339.100.10.2.2 integer read-only
The version of the SSH Server.
                             sshTimeout 1.3.6.1.4.1.6339.100.10.2.3 integer read-write
The time interval that the router waits for the SSH client to respond. The range is 10-600.
                             sshAuthRetries 1.3.6.1.4.1.6339.100.10.2.4 integer read-write
The number of attempts after which the interface is reset. The range is 1-10.
                             sshUseTable 1.3.6.1.4.1.6339.100.10.2.5 no-access
The table for Secure Shell Connection.
                                 sshUseEntry 1.3.6.1.4.1.6339.100.10.2.5.1 no-access
The conceptual row for sshConnInfoTable.
                                     sshUserIndex 1.3.6.1.4.1.6339.100.10.2.5.1.1 integer no-access
                                     sshUserName 1.3.6.1.4.1.6339.100.10.2.5.1.2 displaystring read-write
                                     sshUserType 1.3.6.1.4.1.6339.100.10.2.5.1.3 integer read-write
Enumeration: 'cryptograph': 7, 'noCryptograph': 0.
                                     sshUserPassword 1.3.6.1.4.1.6339.100.10.2.5.1.4 displaystring read-write
                                     sshUserStatus 1.3.6.1.4.1.6339.100.10.2.5.1.5 integer read-write
Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             sshConnInfoTable 1.3.6.1.4.1.6339.100.10.2.6 no-access
The table for Secure Shell Connection.
                                 sshConnInfoEntry 1.3.6.1.4.1.6339.100.10.2.6.1 no-access
The conceptual row for sshConnInfoTable.
                                     sshConnID 1.3.6.1.4.1.6339.100.10.2.6.1.1 integer read-only
The connection ID of the Secure Shell Connection.
                                     sshConnVersion 1.3.6.1.4.1.6339.100.10.2.6.1.2 integer read-only
The SSH version.
                                     sshConnStatus 1.3.6.1.4.1.6339.100.10.2.6.1.3 integer read-only
The SSH connection State. negotiationStart(1) mean the SSH is in its negotiation start state, authenticationStart(2) mean the SSH is in authentication start state, sessionStart(3) mean the SSH is in session start State. Enumeration: 'negotiationStart': 1, 'authenticationStart': 2, 'sessionStart': 3.
                                     sshConnUserName 1.3.6.1.4.1.6339.100.10.2.6.1.4 displaystring read-only
User Name.
                         tacacsMgt 1.3.6.1.4.1.6339.100.10.3
                             tacacsServerHostTable 1.3.6.1.4.1.6339.100.10.3.1 no-access
IP address of TACACS server.
                                 tacacsServerHostEntry 1.3.6.1.4.1.6339.100.10.3.1.1 no-access
                                     tacacsServerHostIndex 1.3.6.1.4.1.6339.100.10.3.1.1.1 integer no-access
IP address of TACACS server.
                                     tacacsServerHostIP 1.3.6.1.4.1.6339.100.10.3.1.1.2 ipaddress read-write
IP address of TACACS server.
                                     tacacsServerHostPort 1.3.6.1.4.1.6339.100.10.3.1.1.3 integer read-write
Port of TACACS server.
                                     tacacsServerHostPrimary 1.3.6.1.4.1.6339.100.10.3.1.1.4 integer read-write
Enumeration: 'noPrimary': 0, 'primary': 1.
                                     tacacsServerHostStatus 1.3.6.1.4.1.6339.100.10.3.1.1.5 integer read-write
Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                     tacacsServerHostKey 1.3.6.1.4.1.6339.100.10.3.1.1.6 displaystring read-write
Key for TACACS. Input space(' ') to clear this key
                                     tacacsServerHostTimeout 1.3.6.1.4.1.6339.100.10.3.1.1.7 integer read-write
The time before retransmit of the TACACS server.
                             tacacsServerTimeout 1.3.6.1.4.1.6339.100.10.3.2 integer read-write
The time before retransmit of the TACACS server.
                             tacacsServerKey 1.3.6.1.4.1.6339.100.10.3.3 displaystring read-write
Key for TACACS. Input space(' ') to clear this key
                         am 1.3.6.1.4.1.6339.100.10.4
                             amGlobalEnable 1.3.6.1.4.1.6339.100.10.4.1 integer read-write
Global Enable or disable the Access Management. Enumeration: 'enable': 1, 'disable': 2.
                             amPortInfoTable 1.3.6.1.4.1.6339.100.10.4.2 no-access
Access Management information list of port.
                                 amPortInfoEntry 1.3.6.1.4.1.6339.100.10.4.2.1 no-access
                                     amPortIndex 1.3.6.1.4.1.6339.100.10.4.2.1.1 integer no-access
port index
                                     amPortEnable 1.3.6.1.4.1.6339.100.10.4.2.1.2 integer read-write
Enable or disable the Access Management on the port. Enumeration: 'enable': 1, 'disable': 2.
                                     amPortForwardingType 1.3.6.1.4.1.6339.100.10.4.2.1.3 integer read-write
Access Management forwarding type. Enumeration: 'ip-pool': 1, 'mac-ip-pool': 2.
                                     amPortIp 1.3.6.1.4.1.6339.100.10.4.2.1.4 ipaddress read-only
IP address of Access Management.
                                     amPortMac 1.3.6.1.4.1.6339.100.10.4.2.1.5 macaddress read-write
Mac address of Access Management.
                                     amPortCount 1.3.6.1.4.1.6339.100.10.4.2.1.6 integer read-write
Seriate IP address number.
                                     amPortStatus 1.3.6.1.4.1.6339.100.10.4.2.1.7 integer read-write
Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                         radiusMgt 1.3.6.1.4.1.6339.100.10.5
                             aaaEnabled 1.3.6.1.4.1.6339.100.10.5.1 integer read-write
Enable or disable Aaa function. Enumeration: 'enable': 1, 'disable': 0.
                             aaaAccount 1.3.6.1.4.1.6339.100.10.5.2 integer read-write
Enable or disable Aaa Accounting function. Enumeration: 'enable': 1, 'disable': 0.
                             aaaAccountUpdate 1.3.6.1.4.1.6339.100.10.5.3 integer read-write
Enable or disable Aaa Accounting update function. Enumeration: 'enable': 1, 'disable': 0.
                             aaaAccountBindingDHCP 1.3.6.1.4.1.6339.100.10.5.4 integer read-write
Enable or disable Aaa Accounting DHCP-Binding function. Enumeration: 'enable': 1, 'disable': 0.
                             radiusAuthenServerHostTable 1.3.6.1.4.1.6339.100.10.5.5 no-access
Configuration items and information list of RADIUS authentication server host.
                                 radiusAuthenServerHostEntry 1.3.6.1.4.1.6339.100.10.5.5.1 no-access
                                     radiusAuthenServerHostIndex 1.3.6.1.4.1.6339.100.10.5.5.1.1 integer no-access
Index of RADIUS authentication server.
                                     radiusAuthenServerHostIP 1.3.6.1.4.1.6339.100.10.5.5.1.2 displaystring read-write
IP address of RADIUS authentication server.
                                     radiusAuthenServerHostPort 1.3.6.1.4.1.6339.100.10.5.5.1.3 integer read-write
Port of RADIUS authentication server.
                                     radiusAutServerHostKey 1.3.6.1.4.1.6339.100.10.5.5.1.4 displaystring read-write
Key for RADIUS authentication server. Input space(' ') to clear this key
                                     radiusAuthenServerHostPrimary 1.3.6.1.4.1.6339.100.10.5.5.1.5 integer read-write
Configuration of primary or not primary Enumeration: 'noPrimary': 0, 'primary': 1.
                                     radiusAutServerHostAccessMode 1.3.6.1.4.1.6339.100.10.5.5.1.6 integer read-write
Configuration access mode of none, dot1x or telnet Enumeration: 'none': 0, 'telnet': 2, 'dot1x': 1.
                                     radiusAuthenServerHostStatus 1.3.6.1.4.1.6339.100.10.5.5.1.7 integer read-write
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             radiusAcctServerHostTable 1.3.6.1.4.1.6339.100.10.5.6 no-access
Configuration items and information list of RADIUS accounting server host.
                                 radiusAcctServerHostEntry 1.3.6.1.4.1.6339.100.10.5.6.1 no-access
                                     radiusAcctServerHostIndex 1.3.6.1.4.1.6339.100.10.5.6.1.1 integer no-access
Index of RADIUS accounting server.
                                     radiusAcctServerHostIP 1.3.6.1.4.1.6339.100.10.5.6.1.2 displaystring read-write
IP address of RADIUS accounting server.
                                     radiusAcctServerHostPort 1.3.6.1.4.1.6339.100.10.5.6.1.3 integer read-write
Port of RADIUS accounting server.
                                     radiusAcctServerHostKey 1.3.6.1.4.1.6339.100.10.5.6.1.4 displaystring read-write
Key for RADIUS accounting server. Input space(' ') to clear this key
                                     radiusAcctServerHostPrimary 1.3.6.1.4.1.6339.100.10.5.6.1.5 integer read-write
Configuration of primary or not primary Enumeration: 'noPrimary': 0, 'primary': 1.
                                     radiusAcctServerHostStatus 1.3.6.1.4.1.6339.100.10.5.6.1.6 integer read-write
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             radiusServerTimeout 1.3.6.1.4.1.6339.100.10.5.7 integer read-write
The time before retransmit of the RADIUS server.
                             radiusServerRetransmit 1.3.6.1.4.1.6339.100.10.5.8 integer read-write
Retransmit time before giving up the current RADIUS server.
                             radiusServerDeadTime 1.3.6.1.4.1.6339.100.10.5.9 integer read-write
The time before retry of the down-server.
                             radiusServerKey 1.3.6.1.4.1.6339.100.10.5.10 displaystring read-write
Key for RADIUS. Input space(' ') to clear this key
                             radiusServerAccountTimeOut 1.3.6.1.4.1.6339.100.10.5.11 integer read-write
Accounting update interval.
                             radiusServerNasIpv4 1.3.6.1.4.1.6339.100.10.5.12 ipaddress read-write
Radius server nas IPv4. Input 0.0.0.0 to delete nas ipv4 address
                             radiusServerNasIpv6 1.3.6.1.4.1.6339.100.10.5.13 displaystring read-write
Radius server nas IPv6. Input 0 to delete nas IPv6 address
                   priQos 1.3.6.1.4.1.6339.100.11
                         qos 1.3.6.1.4.1.6339.100.11.1
                             qosEnable 1.3.6.1.4.1.6339.100.11.1.1 integer read-write
qos golbal switch.disable express close,enable is open. Enumeration: 'enable': 1, 'disable': 0.
                             qosPortTable 1.3.6.1.4.1.6339.100.11.1.2 no-access
qos port configration.
                                 qosPortEntry 1.3.6.1.4.1.6339.100.11.1.2.1 no-access
qos port list of concrete definition.index is port index
                                     qosPortIndex 1.3.6.1.4.1.6339.100.11.1.2.1.1 integer no-access
port Index
                                     qosPortType 1.3.6.1.4.1.6339.100.11.1.2.1.2 integer read-only
the relation between qosPortType and CLI: 1 mls qos cos { }; 0 mls qos trust {cos [pass-through-cos] [pass-through-dscp]|dscp [pass-through-cos] [pass-through-dscp]| ip-precedence [pass-through-cos] [pass-through-dscp] |port priority [pass-through-cos] [pass-through-dscp]} ; 2 mls qos dscp-mutation ; 3 priority-queue out. According to the relation,when configurate qos with snmp,first set the qosPortType to the correct value to select CLI, then set next CLI parameter.Fox example,set qos default cos is 5, first set qosPortType=1 ,then set qosPortCos to 5, finally setting qosPortStatus to 1, trigger snmp-cache works. Enumeration: 'priorityQueueOut': 3, 'dscpMutation': 2, 'cos': 1, 'trust': 0.
                                     qosPortCos 1.3.6.1.4.1.6339.100.11.1.2.1.3 integer read-only
port default cos value
                                     qosPortTrust 1.3.6.1.4.1.6339.100.11.1.2.1.4 integer read-only
Configure port trust. priority(0),mls qos trust port priority ; priAndPassThroughDscp(1),opposite cli is mls qos trust port priority pass-through-dscp; priAndPassThroughCos(2),opposite cli is mls qos trust port priority pass-through-cos; priAndPassThroughCosAndPassThroughDscp(3),opposite cli is mls qos trust port priority pass-through-cos pass-through-dscp; cos(4),mls qos trust cos; cosAndPassThroughDscp(5),opposite cli is mls qos trust cos pass-through-dscp; cosAndPassThroughCos(6),opposite cli is mls qos trust cos pass-through-cos; cosAndPassThroughCosAndPassThroughDscp(7),opposite cli is mls qos trust cos pass-through-cos pass-through-dscp; dscp(8),mls qos trust dscp; dscpAndPassThroughCos(9),opposite cli is mls qos trust dscp pass-through-cos; dscpAndPassThroughDscp(10),opposite cli is mls qos trust dscp pass-through-dscp; dscpAndPassThroughDscpAndPassThroughCos(11),opposite cli is mls qos trust dscp pass-through-dscp pass-through-cos; ipPrecedence(12), mls qos trust ip-precedence; ipPreAndPassThroughCos(13),opposite cli is mls qos trust ip-precedence pass-through-cos; ipPreAndPassThroughDSCP(14),opposite cli is mls qos trust ip-precedence pass-through-dscp; ipPreAndPassThroughDSCPAndPassThroughCos(15),opposite cli is mls qos trust ip-precedence pass-through-dscp pass-through-cos; mplsEXP(16),mls qos mpls trust exp. Enumeration: 'ipPreAndPassThroughDSCP': 14, 'cosAndPassThroughCosAndPassThroughDscp': 7, 'cos': 4, 'cosAndPassThroughCos': 6, 'cosAndPassThroughDscp': 5, 'dscpAndPassThroughCos': 9, 'ipPreAndPassThroughCos': 13, 'dscp': 8, 'ipPrecedence': 12, 'priority': 0, 'priAndPassThroughCosAndPassThroughDscp': 3, 'dscpAndPassThroughDscp': 10, 'dscpAndPassThroughDscpAndPassThroughCos': 11, 'priAndPassThroughCos': 2, 'mplsEXP': 16, 'priAndPassThroughDscp': 1, 'ipPreAndPassThroughDSCPAndPassThroughCos': 15.
                                     qosPortPriority 1.3.6.1.4.1.6339.100.11.1.2.1.5 integer read-only
The corresponding CLI:mls qos trust port priority .
                                     qosPortMutation 1.3.6.1.4.1.6339.100.11.1.2.1.6 displaystring read-only
configure port of dscp-mutation,opposite cli 'mls qos dscp-mutation '
                                     qosPortQueue 1.3.6.1.4.1.6339.100.11.1.2.1.7 integer read-only
priorityQueue configure queue out method to strict priority-queue method; wrrQueue restores the default wrr queue out method. Enumeration: 'priorityQueue': 0, 'wrrQueue': 1.
                                     qosPortStatus 1.3.6.1.4.1.6339.100.11.1.2.1.8 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qosClassMapTable 1.3.6.1.4.1.6339.100.11.1.3 no-access
classmap configure list
                                 qosclassmapEntry 1.3.6.1.4.1.6339.100.11.1.3.1 no-access
about classmap list of concrete definition,index is classmapname.
                                     qosClassMapName 1.3.6.1.4.1.6339.100.11.1.3.1.1 displaystring no-access
classmap name
                                     qosClassMapType 1.3.6.1.4.1.6339.100.11.1.3.1.2 integer read-only
0 class-map ,index is classmapname; 1 match access-group ,need qosClassMapAccessGroup cooperation; 2 match ip dscp qosClassMapDscp ; 3 match ip precedence qosClassMapIpPre; 4 match vlan qosClassMapVlan; 5 match ipv6 dscp qosClassMapV6Dscp; 7 match ipv6 flowlabel qosClassMapV6Flow; 8 match ipv6 access-group qosClassMapV6AccGroup 9 match cos qosClassCos 10 match mpls-experimental topmost qosClassMapEXPtopmost Enumeration: 'v6dscp': 5, 'cos': 9, 'ippre': 3, 'v6Flow': 7, 'vlan': 4, 'accessGroup': 1, 'dscp': 2, 'configurClassMap': 0, 'exptopmost': 10, 'v6AccessGroup': 8.
                                     qosClassMapAccessGroup 1.3.6.1.4.1.6339.100.11.1.3.1.3 displaystring read-only
Match specify access-group (name or number). This object be configured only if qosClassMapType in the same row is accessGroup(1).
                                     qosClassMapDscp 1.3.6.1.4.1.6339.100.11.1.3.1.4 displaystring read-only
Match specify Dscp. This object be configured only if qosClassMapType in the same row is dscp(2).
                                     qosClassMapV6Dscp 1.3.6.1.4.1.6339.100.11.1.3.1.5 displaystring read-only
Match specify ipv6 Dscp. This object be configured only if qosClassMapType in the same row is v6dscp(5).
                                     qosClassMapIpPre 1.3.6.1.4.1.6339.100.11.1.3.1.6 displaystring read-only
Match specify Ip Precedence. This object be configured only if qosClassMapType in the same row is ippre(3).
                                     qosClassMapV6AccGroup 1.3.6.1.4.1.6339.100.11.1.3.1.7 displaystring read-only
Match specify Ipv6 Access-Group. This object be configured only if qosClassMapType in the same row is v6AccessGroup(8).
                                     qosClassMapV6Flow 1.3.6.1.4.1.6339.100.11.1.3.1.8 displaystring read-only
Match specify Ipv6 Flowlabel. This object be configured only if qosClassMapType in the same row is v6Flow(6).
                                     qosClassMapVlan 1.3.6.1.4.1.6339.100.11.1.3.1.9 displaystring read-only
Match specify Vlan list . At most 8 vlan id. This object be configured only if qosClassMapType in the same row is vlan(4).
                                     qosClassCos 1.3.6.1.4.1.6339.100.11.1.3.1.10 displaystring read-only
Match specify Cos . This object be configured only if qosClassMapType in the same row is cos(9).
                                     qosClassMapEXPtopmost 1.3.6.1.4.1.6339.100.11.1.3.1.11 displaystring read-only
Match specify MPLS EXP. This object be configured only if qosClassMapType in the same row is EXPtopmost(10).
                                     qosClassMapStatus 1.3.6.1.4.1.6339.100.11.1.3.1.12 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qosPolicyTable 1.3.6.1.4.1.6339.100.11.1.4 no-access
qos policy list
                                 qosPolicyEntry 1.3.6.1.4.1.6339.100.11.1.4.1 no-access
qos policy list of definition,index is qos policy and classmap of name
                                     qosPolicyName 1.3.6.1.4.1.6339.100.11.1.4.1.1 displaystring no-access
QoS Policy name
                                     qosPolicyClassMap 1.3.6.1.4.1.6339.100.11.1.4.1.2 displaystring read-only
Specify the classmap name.After a policy map is created, it can be associated to a class. So, if you want the class map to match the policy map,please setting the qosPolicyType to 1,and then setting the qosPolicyStatus to 1 .
                                     qosPolicyType 1.3.6.1.4.1.6339.100.11.1.4.1.3 integer read-only
the relation between qosPolicyType and CLI: 0 policy-map ; 1 class ; 2 police [exceed-action {drop | policed-dscp-transmit}]; 3 police aggregate ; Enumeration: 'aggregatePolicer': 3, 'sp': 2, 'matchclassmap': 1, 'policymap': 0.
                                     qosPolicyRateKbps 1.3.6.1.4.1.6339.100.11.1.4.1.4 integer read-only
Rate Bandwidth of one policymap. This object be configured only if qosPolicyType in the same row is sp(2).
                                     qosPolicyNormalBurstKbps 1.3.6.1.4.1.6339.100.11.1.4.1.5 integer read-only
Normal burst kbytes.
                                     qosPolicyMaximumBurstKbps 1.3.6.1.4.1.6339.100.11.1.4.1.6 integer read-only
Maximum burst kbytes.
                                     qosPolicyPeakKbps 1.3.6.1.4.1.6339.100.11.1.4.1.7 integer read-only
Peak information rate.
                                     qosPolicyConformAction 1.3.6.1.4.1.6339.100.11.1.4.1.8 integer read-only
conform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed is not exceeded; conform-action set-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is not exceeded; conform-action set-prec-transmit specifies to mark down packet TOS value according to policed-dscp mapping when specified speed is not exceeded. Enumeration: 'transmit': 0, 'set-dscp-transmit': 2, 'drop': 1, 'set-prec-transmit': 3.
                                     qosPolicyConformActionChangeValue 1.3.6.1.4.1.6339.100.11.1.4.1.9 integer read-only
If conform-action is set-dscp-transmit(2),the value is between 0-63; else if conform-action is set-prec-transmit(2),the value is between 0-7.
                                     qosPolicyExceedAction 1.3.6.1.4.1.6339.100.11.1.4.1.10 integer read-only
exceed-action transmit means send packets without any change when specified speed is exceeded; exceed-action drop means drop packets when specified speed is exceeded; exceed-action policed-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is exceeded. Enumeration: 'transmit': 0, 'drop': 1, 'policeDscpTransmit': 2.
                                     qosPolicyViolateAction 1.3.6.1.4.1.6339.100.11.1.4.1.11 integer read-only
violate-action transmit means send packets without any change when specified speed is violate; violate-action drop means drop packets when specified speed is violate; violate-action policed-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is violate. Enumeration: 'transmit': 0, 'drop': 1, 'policeDscpTransmit': 2.
                                     qosPolicyAggregatePolicer 1.3.6.1.4.1.6339.100.11.1.4.1.12 displaystring read-only
aggregate-policer-name. This object be configured only if qosPolicyType in the same row is aggregatePolicer(3).
                                     qosPolicyStatus 1.3.6.1.4.1.6339.100.11.1.4.1.13 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qosAggPolicerTable 1.3.6.1.4.1.6339.100.11.1.5 no-access
qos of AggPolicer list,use it can configure one item AggPolicer,Attention : the get/get next operation can only get snmp cache content, please refer to qosshow node for the running configuraton
                                 qosAggPolicerEntry 1.3.6.1.4.1.6339.100.11.1.5.1 no-access
index is AggPolicer name.
                                     qosAggPolicerName 1.3.6.1.4.1.6339.100.11.1.5.1.1 displaystring no-access
QoS qosAggPolicer name
                                     qosAggPolicerRateKbps 1.3.6.1.4.1.6339.100.11.1.5.1.2 integer read-only
Rate Bandwidth of After the classification.
                                     qosAggPolicerNormalBurstKbps 1.3.6.1.4.1.6339.100.11.1.5.1.3 integer read-only
Normal burst kbytes.
                                     qosAggPolicerMaximumBurstKbps 1.3.6.1.4.1.6339.100.11.1.5.1.4 integer read-only
Maximum burst kbytes.
                                     qosAggPolicerPeakKbps 1.3.6.1.4.1.6339.100.11.1.5.1.5 integer read-only
Peak information rate.
                                     qosAggPolicerConformAction 1.3.6.1.4.1.6339.100.11.1.5.1.6 integer read-only
conform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed is not exceeded; conform-action set-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is not exceeded; conform-action set-prec-transmit specifies to mark down packet TOS value according to policed-dscp mapping when specified speed is not exceeded. Enumeration: 'transmit': 0, 'set-dscp-transmit': 2, 'drop': 1, 'set-prec-transmit': 3.
                                     qosAggPolicerConformActionChangeValue 1.3.6.1.4.1.6339.100.11.1.5.1.7 integer read-only
If conform-action is set-dscp-transmit(2),the value is between 0-63; else if conform-action is set-prec-transmit(2),the value is between 0-7.
                                     qosAggPolicerExceedAction 1.3.6.1.4.1.6339.100.11.1.5.1.8 integer read-only
exceed-action transmit means send packets without any change when specified speed is exceeded; exceed-action drop means drop packets when specified speed is exceeded; exceed-action policed-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is exceeded. Enumeration: 'transmit': 0, 'drop': 1, 'policeDscpTransmit': 2.
                                     qosAggPolicerViolateAction 1.3.6.1.4.1.6339.100.11.1.5.1.9 integer read-only
violate-action transmit means send packets without any change when specified speed is violate; violate-action drop means drop packets when specified speed is violate; violate-action policed-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is violate. Enumeration: 'transmit': 0, 'drop': 1, 'policeDscpTransmit': 2.
                                     qosAggPolicerStatus 1.3.6.1.4.1.6339.100.11.1.5.1.10 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qosSetTable 1.3.6.1.4.1.6339.100.11.1.6 no-access
remark new dscp or ip precedence for classified flow
                                 qosSetEntry 1.3.6.1.4.1.6339.100.11.1.6.1 no-access
qosSetTable list of acce index policyname and classmap name.
                                     qosSetPolicyMapName 1.3.6.1.4.1.6339.100.11.1.6.1.1 displaystring no-access
QoS Policy name
                                     qosSetClassMapName 1.3.6.1.4.1.6339.100.11.1.6.1.2 displaystring read-only
QoS class map name
                                     qosSetType 1.3.6.1.4.1.6339.100.11.1.6.1.3 integer read-only
qosSetType range:1,2,3,4,5,6,7,8,9 1 dscp Set IP DSCP (DiffServ CodePoints); 2 precedence Set IP precedence; 3 nexthop Set IP nexthop; 4 dscp Set IPv6 DSCP (DiffServ CodePoints); 6 flowlabel Set IPv6 flowlabel; 7 v6nextHop Set IPv6 nexthop; 8 cos Set CoS ; 9 expimposition Set mpls-experimental-imposition Enumeration: 'v6Dscp': 4, 'v6nextHop': 7, 'cos': 8, 'expimposition': 9, 'precedence': 2, 'nextHop': 3, 'dscp': 1, 'v6FlowLabel': 6.
                                     qosSetdscp 1.3.6.1.4.1.6339.100.11.1.6.1.4 integer read-only
remark dscp for the classified flow
                                     qosSetprecedence 1.3.6.1.4.1.6339.100.11.1.6.1.5 integer read-only
remark ip precedence for classified flow
                                     qosSetnextHop 1.3.6.1.4.1.6339.100.11.1.6.1.6 ipaddress read-only
set nexthop for classified flow
                                     qosSetv6Dscp 1.3.6.1.4.1.6339.100.11.1.6.1.7 integer read-only
remark ipv6 dscp for classified flow
                                     qosSetv6FlowLabel 1.3.6.1.4.1.6339.100.11.1.6.1.8 integer read-only
remark ipv6 flow lable for classified flow
                                     qosSetv6nextHop 1.3.6.1.4.1.6339.100.11.1.6.1.9 displaystring read-only
set IPv6 nexthop for classified flow
                                     qosSetCos 1.3.6.1.4.1.6339.100.11.1.6.1.10 integer read-only
remark cos for classified flow
                                     qosSetEXPimposition 1.3.6.1.4.1.6339.100.11.1.6.1.11 integer read-only
remark MPLS EXP value for classified flow
                                     qosSetStatus 1.3.6.1.4.1.6339.100.11.1.6.1.12 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qosPortBindTable 1.3.6.1.4.1.6339.100.11.1.7 no-access
Apply a policy map to the specified port.
                                 qosPortBindEntry 1.3.6.1.4.1.6339.100.11.1.7.1 no-access
the index of this entry is port-index and policy-map
                                     qosPortBindIndex 1.3.6.1.4.1.6339.100.11.1.7.1.1 integer no-access
QoS Port Index
                                     qosPortBindPolicy 1.3.6.1.4.1.6339.100.11.1.7.1.2 displaystring no-access
QoS Policy name
                                     qosPortBindType 1.3.6.1.4.1.6339.100.11.1.7.1.3 integer read-only
input(1),bind the policy-map to ingress port; output(2),bind the policy-map to egress port; noinput(3),unbind the policy-map to ingress port; nooutput(4), unbind the policy-map to egress port Enumeration: 'noinput': 3, 'input': 1, 'nooutput': 4, 'output': 2.
                             qosPortQueueTable 1.3.6.1.4.1.6339.100.11.1.8 no-access
set golbal qos WRR weight
                                 qosPortQueueEntry 1.3.6.1.4.1.6339.100.11.1.8.1 no-access
set port qos WRR weight,index is port index.
                                     qosPortQueueIndex 1.3.6.1.4.1.6339.100.11.1.8.1.1 integer no-access
QoS Port Index
                                     qosPortQueueWeight1 1.3.6.1.4.1.6339.100.11.1.8.1.2 integer read-only
WRR weight,range is 0~15.
                                     qosPortQueueWeight2 1.3.6.1.4.1.6339.100.11.1.8.1.3 integer read-only
WRR weight,range is 0~15.
                                     qosPortQueueWeight3 1.3.6.1.4.1.6339.100.11.1.8.1.4 integer read-only
WRR weight,range is 0~15.
                                     qosPortQueueWeight4 1.3.6.1.4.1.6339.100.11.1.8.1.5 integer read-only
WRR weight,range is 0~15.
                                     qosPortQueueWeight5 1.3.6.1.4.1.6339.100.11.1.8.1.6 integer read-only
WRR weight,range is 0~15.
                                     qosPortQueueWeight6 1.3.6.1.4.1.6339.100.11.1.8.1.7 integer read-only
WRR weight,range is 0~15.
                                     qosPortQueueWeight7 1.3.6.1.4.1.6339.100.11.1.8.1.8 integer read-only
WRR weight,range is 0~15.
                                     qosPortQueueWeight8 1.3.6.1.4.1.6339.100.11.1.8.1.9 integer read-only
WRR weight,range is 0~15.
                                     qosPortQueueStatus 1.3.6.1.4.1.6339.100.11.1.8.1.10 integer read-only
Setting it to active(1) creates an entry.Setting it to destroy(2) destroys an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qosMap 1.3.6.1.4.1.6339.100.11.1.10
                                   qosMapType 1.3.6.1.4.1.6339.100.11.1.10.1 integer read-only
qosMapType range is 1~5.1 mls qos map cos-dscp ; 2 mls qos map dscp-cos to ; 3 mls qos map dscp-mutation to ; 4 mls qos map ip-prec-dscp ; 5 mls qos map policed-dscp to ; 6 mls qos map exp-dscp ; 7 mls qos map dscp-exp to When you want to configure the Map of DSCP to COS,please configure the qosMapType==2 firstly, input the dscp(1~8) optionally, then configure the qosMapCos , valid/invalid the qosMapStatus finally. Enumeration: 'cosDscp': 1, 'dscpexp': 7, 'policedDscp': 5, 'dscpMutation': 3, 'expdscp': 6, 'ipPrecDscp': 4, 'dscpCos': 2.
                                   qosMapDscp1 1.3.6.1.4.1.6339.100.11.1.10.2 integer read-only
DSCP-CoS map,DSCP range is 0~63
                                   qosMapDscp2 1.3.6.1.4.1.6339.100.11.1.10.3 integer read-only
DSCP-CoS map,DSCP range is 0~63
                                   qosMapDscp3 1.3.6.1.4.1.6339.100.11.1.10.4 integer read-only
DSCP-CoS map,DSCP range is 0~63
                                   qosMapDscp4 1.3.6.1.4.1.6339.100.11.1.10.5 integer read-only
DSCP-CoS map,DSCP range is 0~63
                                   qosMapDscp5 1.3.6.1.4.1.6339.100.11.1.10.6 integer read-only
DSCP-CoS map,DSCP range is 0~63
                                   qosMapDscp6 1.3.6.1.4.1.6339.100.11.1.10.7 integer read-only
DSCP-CoS map,DSCP range is 0~63
                                   qosMapDscp7 1.3.6.1.4.1.6339.100.11.1.10.8 integer read-only
DSCP-CoS map,DSCP range is 0~63
                                   qosMapDscp8 1.3.6.1.4.1.6339.100.11.1.10.9 integer read-only
DSCP-CoS map,DSCP range is 0~63
                                   qosMapCos 1.3.6.1.4.1.6339.100.11.1.10.10 integer read-only
the cos which DSCP map to
                                   qosMapEXP 1.3.6.1.4.1.6339.100.11.1.10.11 integer read-only
the EXP value which DSCP map to
                                   qosMapMarkDownDscp 1.3.6.1.4.1.6339.100.11.1.10.12 integer read-only
the dscp after mark down
                                   qosMapMarkDownType 1.3.6.1.4.1.6339.100.11.1.10.13 integer read-only
normal-burst:markdown map used by the exceed-action;max-burst:markdown map used by the violate-action. Enumeration: 'normal-burst': 0, 'max-burst': 1.
                                   qosMapMutationName 1.3.6.1.4.1.6339.100.11.1.10.14 displaystring read-only
map name
                                   qosMapMutationOut 1.3.6.1.4.1.6339.100.11.1.10.15 integer read-only
egress DSCP,only one,eight ingress DSCP value map to one egress value
                                   qosMapStatus 1.3.6.1.4.1.6339.100.11.1.10.16 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             showqos 1.3.6.1.4.1.6339.100.11.1.11
                                   showclassmapTable 1.3.6.1.4.1.6339.100.11.1.11.1 no-access
show class map table
                                       showclassmapEntry 1.3.6.1.4.1.6339.100.11.1.11.1.1 no-access
show class map entry
                                           showclassmapname 1.3.6.1.4.1.6339.100.11.1.11.1.1.1 displaystring no-access
classmap name
                                           showclassmapmatch 1.3.6.1.4.1.6339.100.11.1.11.1.1.2 displaystring read-only
one item classmap match rule
                                   showpolicymapTable 1.3.6.1.4.1.6339.100.11.1.11.2 no-access
show policy list
                                       showpolicymapEntry 1.3.6.1.4.1.6339.100.11.1.11.2.1 no-access
policy map entry
                                           showpolicymapname 1.3.6.1.4.1.6339.100.11.1.11.2.1.1 displaystring no-access
policy name
                                           showpolicymapcontent 1.3.6.1.4.1.6339.100.11.1.11.2.1.2 displaystring read-only
the match classmap and all defined other rules
                                   showqosaggregatepolicerTable 1.3.6.1.4.1.6339.100.11.1.11.3 no-access
display aggregatepolicer list
                                       showqosaggregatepolicerEntry 1.3.6.1.4.1.6339.100.11.1.11.3.1 no-access
aggregatepolicer entry,index is showqosaggregatepolicername
                                           showqosaggregatepolicername 1.3.6.1.4.1.6339.100.11.1.11.3.1.1 displaystring no-access
aggregatepolicer name
                                           showqosaggregatepolicercontent 1.3.6.1.4.1.6339.100.11.1.11.3.1.2 displaystring read-only
aggregatepolicer parameter
                                   showmlsqosinterfaceTable 1.3.6.1.4.1.6339.100.11.1.11.4 no-access
show port qos configuration
                                       showmlsqosinterfaceEntry 1.3.6.1.4.1.6339.100.11.1.11.4.1 no-access
showmlsqosinterfaceTable,index is port-index
                                           showmlsqosinterfaceIndex 1.3.6.1.4.1.6339.100.11.1.11.4.1.1 integer no-access
port index
                                           showmlsqosinterfaceqoscontent 1.3.6.1.4.1.6339.100.11.1.11.4.1.2 displaystring read-only
qos port configuration
                                   showmlsqosmaps 1.3.6.1.4.1.6339.100.11.1.11.5
                                       showmlsqosmapscosdscp 1.3.6.1.4.1.6339.100.11.1.11.5.1 displaystring read-only
cos-dscp map
                                       showmlsqosmapscosqueue 1.3.6.1.4.1.6339.100.11.1.11.5.2 displaystring read-only
COS-wrr-queue map
                                       showmlsqosmapsdscpcos 1.3.6.1.4.1.6339.100.11.1.11.5.3 displaystring read-only
DSCP-COS map
                                       showmlsqosmapsipprecdscp 1.3.6.1.4.1.6339.100.11.1.11.5.4 displaystring read-only
IP precedence to DSCP map
                                       showmlsqosmapspoliceddscp 1.3.6.1.4.1.6339.100.11.1.11.5.5 displaystring read-only
DSCP mark down map
                                       showmlsqosmapspoliceddscpnormalburst 1.3.6.1.4.1.6339.100.11.1.11.5.6 displaystring read-only
Normal Burst Policed-dscp map
                                       showmlsqosmapsexpdscp 1.3.6.1.4.1.6339.100.11.1.11.5.7 displaystring read-only
EXP to DSCP map
                                       showmlsqosmapsdscpexp 1.3.6.1.4.1.6339.100.11.1.11.5.8 displaystring read-only
DSCP to EXP map
                                   showmlsqosmapsdscpmutationTable 1.3.6.1.4.1.6339.100.11.1.11.6 no-access
ingress DSCP to egress DSCP map
                                       showmlsqosmapsdscpmutationEntry 1.3.6.1.4.1.6339.100.11.1.11.6.1 no-access
index is dscpmutationname
                                           showmlsqosmapsdscpmutationname 1.3.6.1.4.1.6339.100.11.1.11.6.1.1 displaystring no-access
dscpmutationname.
                                           showmlsqosmapsdscpmutationcontent 1.3.6.1.4.1.6339.100.11.1.11.6.1.2 displaystring read-only
DSCP-DSCP map
                         qos3 1.3.6.1.4.1.6339.100.11.2
                             qos3PolicyMapGroupTable 1.3.6.1.4.1.6339.100.11.2.1 no-access
this table is used for building a policy and mapping the named policy to number, if you want to configure a policy,you must map at here.
                                 qos3PolicyMapGroupEntry 1.3.6.1.4.1.6339.100.11.2.1.1 no-access
entry for policy map group.
                                     qos3PolicyMapGroupIndex 1.3.6.1.4.1.6339.100.11.2.1.1.1 integer read-only
the range is 0-(2^64 - 1).
                                     qos3PolicyMapGroupName 1.3.6.1.4.1.6339.100.11.2.1.1.2 displaystring read-write
the policy name
                                     qos3PolicyMapGroupIsExt 1.3.6.1.4.1.6339.100.11.2.1.1.3 integer read-write
indicate that whether the policy used on extand field processor. Enumeration: 'enable': 1, 'disable': 0.
                                     qos3PolicyMapGroupStatus 1.3.6.1.4.1.6339.100.11.2.1.1.4 integer read-write
the status of qos3PolicyMapGroupTable Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             qos3ClassMapTable 1.3.6.1.4.1.6339.100.11.2.2 no-access
this table is used for configuring the filter rule of qos
                                 qos3ClassMapEntry 1.3.6.1.4.1.6339.100.11.2.2.1 no-access
entry for class map.
                                     qos3ClassMapName 1.3.6.1.4.1.6339.100.11.2.2.1.1 displaystring read-only
the name of class
                                     qos3ClassMapType 1.3.6.1.4.1.6339.100.11.2.2.1.2 integer read-write
the clss type that you want to matching. Enumeration: 'cos': 0, 'ipv6Flowlabel': 4, 'vlan': 6, 'dscp': 1, 'ipPrecedence': 2, 'ipv6Dscp': 3, 'exp': 5, 'aclIndex': 7.
                                     qos3ClassMapValue 1.3.6.1.4.1.6339.100.11.2.2.1.3 displaystring read-write
the value of you choosed type at last node,the limits: cos <0> dscp <0> ipPrecedence<0> ipv6Dscp<0> vlan <1> ipv6Flowlabel<0> exp is not support now.except aclindex,you can config 8 parameters at most,for example,if you choose the type of cos,you can config 0,1,2,3,4,5,6,7 or 0,1 at here.
                                     qos3ClassMapUsedTime 1.3.6.1.4.1.6339.100.11.2.2.1.4 integer read-only
display how many times the class used.
                                     qos3ClassMapStatus 1.3.6.1.4.1.6339.100.11.2.2.1.5 integer read-write
the status of qos3ClassMapTable,destroy(2) will destroy the whole class-map,remove(3) just clear the value of qos3ClassMapValue. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0, 'remove': 3.
                             qos3AggregatePolicyTable 1.3.6.1.4.1.6339.100.11.2.3 no-access
this table is used for configuring aggregate policy.
                                 qos3AggregatePolicyEntry 1.3.6.1.4.1.6339.100.11.2.3.1 no-access
entry for aggregate policy.
                                     qos3AggPolicyMapName 1.3.6.1.4.1.6339.100.11.2.3.1.1 displaystring read-only
the name of aggregate policy.
                                     qos3AggPolicyCIRKbps 1.3.6.1.4.1.6339.100.11.2.3.1.2 integer read-write
CIR(Committed Information Rate) Kbits per second <1>
                                     qos3AggPolicyCBSKbps 1.3.6.1.4.1.6339.100.11.2.3.1.3 integer read-write
CBS(Committed Burst Size) Kbytes <1>
                                     qos3AggPolicyPBSKbps 1.3.6.1.4.1.6339.100.11.2.3.1.4 integer read-write
PBS(Peak Burst Size) Kbytes <1>
                                     qos3AggPolicyPIRKbps 1.3.6.1.4.1.6339.100.11.2.3.1.5 integer read-write
PIR(Peak Information Rate) Kbits per second <1>
                                     qos3AggPolicyConformAction 1.3.6.1.4.1.6339.100.11.2.3.1.6 bits read-write
Action when rate is not exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). Bits: 'cos': 2, 'drop': 1, 'dscp': 3, 'ipPrecedence': 4, 'intp': 5, 'transmit': 0, 'dp': 6.
                                     qos3AggPolicyconformSetCos 1.3.6.1.4.1.6339.100.11.2.3.1.7 integer read-write
Set COS
                                     qos3AggPolicyconformSetDscp 1.3.6.1.4.1.6339.100.11.2.3.1.8 integer read-write
Change dscp
                                     qos3AggPolicyconformSetPrec 1.3.6.1.4.1.6339.100.11.2.3.1.9 integer read-write
Change precedence
                                     qos3AggPolicyconformSetIntp 1.3.6.1.4.1.6339.100.11.2.3.1.10 integer read-write
Set Internal priority
                                     qos3AggPolicyconformSetDp 1.3.6.1.4.1.6339.100.11.2.3.1.11 integer read-write
Set Drop priority
                                     qos3AggPolicyExceedAction 1.3.6.1.4.1.6339.100.11.2.3.1.12 bits read-write
Action when rate is exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). Bits: 'policiedIntpTransmit': 7, 'cos': 2, 'drop': 1, 'dscp': 3, 'ipPrecedence': 4, 'intp': 5, 'transmit': 0, 'dp': 6.
                                     qos3AggPolicyExceedSetCos 1.3.6.1.4.1.6339.100.11.2.3.1.13 integer read-write
Set COS
                                     qos3AggPolicyExceedSetDscp 1.3.6.1.4.1.6339.100.11.2.3.1.14 integer read-write
Change dscp
                                     qos3AggPolicyExceedSetPrec 1.3.6.1.4.1.6339.100.11.2.3.1.15 integer read-write
Change precedence
                                     qos3AggPolicyExceedSetIntp 1.3.6.1.4.1.6339.100.11.2.3.1.16 integer read-write
Set Internal priority
                                     qos3AggPolicyExceedSetDp 1.3.6.1.4.1.6339.100.11.2.3.1.17 integer read-write
Set Drop priority
                                     qos3AggPolicyViolateAction 1.3.6.1.4.1.6339.100.11.2.3.1.18 bits read-write
Action when rate is violated,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). Bits: 'policiedIntpTransmit': 7, 'cos': 2, 'drop': 1, 'dscp': 3, 'ipPrecedence': 4, 'intp': 5, 'transmit': 0, 'dp': 6.
                                     qos3AggPolicyViolateSetCos 1.3.6.1.4.1.6339.100.11.2.3.1.19 integer read-write
Set COS
                                     qos3AggPolicyViolateSetDscp 1.3.6.1.4.1.6339.100.11.2.3.1.20 integer read-write
Change dscp
                                     qos3AggPolicyViolateSetPrec 1.3.6.1.4.1.6339.100.11.2.3.1.21 integer read-write
Change precedence
                                     qos3AggPolicyViolateSetIntp 1.3.6.1.4.1.6339.100.11.2.3.1.22 integer read-write
Set Internal priority
                                     qos3AggPolicyViolateSetDp 1.3.6.1.4.1.6339.100.11.2.3.1.23 integer read-write
Set Drop priority
                                     qos3AggPolicyStatus 1.3.6.1.4.1.6339.100.11.2.3.1.24 integer read-write
the status of qos3AggregatePolicyTable Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             qos3PolicyTable 1.3.6.1.4.1.6339.100.11.2.4 no-access
this table is used for configuring policy
                                 qos3PolicyEntry 1.3.6.1.4.1.6339.100.11.2.4.1 no-access
entry for policy.
                                     qos3PolicyMapIndex 1.3.6.1.4.1.6339.100.11.2.4.1.1 integer read-only
the index of policy that you configured at qos3PolicyMapGroupTable
                                     qos3PolicyClassMapName 1.3.6.1.4.1.6339.100.11.2.4.1.2 displaystring read-only
Specify the classmap name.After a policy map is created, it can be associated to a class
                                     qos3PolicyInsertClassMapName 1.3.6.1.4.1.6339.100.11.2.4.1.3 displaystring read-write
Specify the position of classmap name
                                     qos3PolicyType 1.3.6.1.4.1.6339.100.11.2.4.1.4 bits read-write
pidAction means simple policy.colorAction and aggregateAction is Mutually exclusive,for example,if you want the pidAction and colorAction become effective,you must set the value c0. Bits: 'colorAction': 1, 'pidAction': 0, 'aggregateAction': 2.
                                     qos3PolicyCIRKbps 1.3.6.1.4.1.6339.100.11.2.4.1.5 integer read-write
CIR(Committed Information Rate) Kbits per second <1>
                                     qos3PolicyCBSKbps 1.3.6.1.4.1.6339.100.11.2.4.1.6 integer read-write
CBS(Committed Burst Size) Kbytes <1>
                                     qos3PolicyPBSKbps 1.3.6.1.4.1.6339.100.11.2.4.1.7 integer read-write
PBS(Peak Burst Size) Kbytes <1>
                                     qos3PolicyPIRKbps 1.3.6.1.4.1.6339.100.11.2.4.1.8 integer read-write
PIR(Peak Information Rate) Kbits per second <1>
                                     qos3PolicyConformAction 1.3.6.1.4.1.6339.100.11.2.4.1.9 bits read-write
Action when rate is not exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). Bits: 'cos': 2, 'drop': 1, 'dscp': 3, 'ipPrecedence': 4, 'intp': 5, 'transmit': 0, 'dp': 6.
                                     qos3PolicyconformSetCos 1.3.6.1.4.1.6339.100.11.2.4.1.10 integer read-write
Set COS
                                     qos3PolicyconformSetDscp 1.3.6.1.4.1.6339.100.11.2.4.1.11 integer read-write
Change dscp
                                     qos3PolicyconformSetPrec 1.3.6.1.4.1.6339.100.11.2.4.1.12 integer read-write
Change precedence
                                     qos3PolicyconformSetIntp 1.3.6.1.4.1.6339.100.11.2.4.1.13 integer read-write
Set Internal priority
                                     qos3PolicyconformSetDp 1.3.6.1.4.1.6339.100.11.2.4.1.14 integer read-write
Set Drop priority
                                     qos3PolicyExceedAction 1.3.6.1.4.1.6339.100.11.2.4.1.15 bits read-write
Action when rate is exceeded,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). Bits: 'policiedIntpTransmit': 7, 'cos': 2, 'drop': 1, 'dscp': 3, 'ipPrecedence': 4, 'intp': 5, 'transmit': 0, 'dp': 6.
                                     qos3PolicyExceedSetCos 1.3.6.1.4.1.6339.100.11.2.4.1.16 integer read-write
Set COS
                                     qos3PolicyExceedSetDscp 1.3.6.1.4.1.6339.100.11.2.4.1.17 integer read-write
Change dscp
                                     qos3PolicyExceedSetPrec 1.3.6.1.4.1.6339.100.11.2.4.1.18 integer read-write
Change precedence
                                     qos3PolicyExceedSetIntp 1.3.6.1.4.1.6339.100.11.2.4.1.19 integer read-write
Set Internal priority
                                     qos3PolicyExceedSetDp 1.3.6.1.4.1.6339.100.11.2.4.1.20 integer read-write
Set Drop priority
                                     qos3PolicyViolateAction 1.3.6.1.4.1.6339.100.11.2.4.1.21 bits read-write
Action when rate is violated,for example: if you want to config cos(2) and intp(5),you must set 24 (0010 0100). Bits: 'policiedIntpTransmit': 7, 'cos': 2, 'drop': 1, 'dscp': 3, 'ipPrecedence': 4, 'intp': 5, 'transmit': 0, 'dp': 6.
                                     qos3PolicyViolateSetCos 1.3.6.1.4.1.6339.100.11.2.4.1.22 integer read-write
Set COS
                                     qos3PolicyViolateSetDscp 1.3.6.1.4.1.6339.100.11.2.4.1.23 integer read-write
Change dscp
                                     qos3PolicyViolateSetPrec 1.3.6.1.4.1.6339.100.11.2.4.1.24 integer read-write
Change precedence
                                     qos3PolicyViolateSetIntp 1.3.6.1.4.1.6339.100.11.2.4.1.25 integer read-write
Set Internal priority
                                     qos3PolicyViolateSetDp 1.3.6.1.4.1.6339.100.11.2.4.1.26 integer read-write
Set Drop priority
                                     qos3PolicyAggregatePolicer 1.3.6.1.4.1.6339.100.11.2.4.1.27 displaystring read-write
the name of aggregate policy
                                     qos3PolicyAccounting 1.3.6.1.4.1.6339.100.11.2.4.1.28 integer read-write
enable the Counter statistics or not. Enumeration: 'enable': 1, 'disable': 0.
                                     qos3PolicyPidAction 1.3.6.1.4.1.6339.100.11.2.4.1.29 bits read-write
simple policy action,for example: if you want to config cos(0) and setSTpid(10),you must set 8020 (1000 0000 0010 0000). some network Management Software offer selections that is not correct,in RFC3417,When encoding an object whose syntax is described using the BITS construct, the value is encoded as an OCTET STRING, in which all the named bits in (the definition of) the bitstring, commencing with the first bit and proceeding to the last bit,are placed in bits 8 (high order bit) to 1 (low order bit) of the first octet, followed by bits 8 to 1 of each subsequent octet in turn, followed by as many bits as are needed of the final subsequent octet, commencing with bit 8. Remaining bits,if any, of the final octet are set to zero on generation and ignored on receipt. Bits: 'ipNextHop': 3, 'cos': 0, 'setTunnelId': 13, 'setSTpid': 10, 'ipv6NextHop': 5, 'drop': 15, 'delCvid': 12, 'addSvid': 11, 'dscp': 1, 'ipPrecedence': 2, 'intp': 6, 'exp': 4, 'transmit': 14, 'setSvid': 9, 'dp': 7, 'setCvid': 8.
                                     qos3SetCos 1.3.6.1.4.1.6339.100.11.2.4.1.30 integer read-write
set cos
                                     qos3SetIpDscp 1.3.6.1.4.1.6339.100.11.2.4.1.31 integer read-write
change dscp
                                     qos3SetIpPrec 1.3.6.1.4.1.6339.100.11.2.4.1.32 integer read-write
change precedence
                                     qos3SetIntp 1.3.6.1.4.1.6339.100.11.2.4.1.33 integer read-write
Set Internal priority
                                     qos3SetDp 1.3.6.1.4.1.6339.100.11.2.4.1.34 integer read-write
Set Drop priority
                                     qos3SetCVid 1.3.6.1.4.1.6339.100.11.2.4.1.35 integer read-write
set vlan id of inner VLAN tag.
                                     qos3SetSVid 1.3.6.1.4.1.6339.100.11.2.4.1.36 integer read-write
set vlan id of outer VLAN tag.
                                     qos3SetSTpid 1.3.6.1.4.1.6339.100.11.2.4.1.37 integer read-write
Set S-tpid Enumeration: 'value0x8100': 1, 'value0x9100': 3, 'value0x88a8': 2.
                                     qos3AddSVid 1.3.6.1.4.1.6339.100.11.2.4.1.38 integer read-write
add vlan id of outer VLAN tag
                                     qos3DelCVid 1.3.6.1.4.1.6339.100.11.2.4.1.39 integer read-only
delete vlan id of inner VLAN tag. Enumeration: 'enable': 1, 'disable': 0.
                                     qos3SetTunnelId 1.3.6.1.4.1.6339.100.11.2.4.1.40 integer read-write
                                     qos3SetIpDefaultPBR 1.3.6.1.4.1.6339.100.11.2.4.1.41 integer read-write
whether add Default routing of ip type. Enumeration: 'enable': 1, 'disable': 0.
                                     qos3SetIpVrf 1.3.6.1.4.1.6339.100.11.2.4.1.42 integer read-write
set the vrf of ip type
                                     qos3SetIpNextHop 1.3.6.1.4.1.6339.100.11.2.4.1.43 ipaddress read-write
set Nexthop IP address.
                                     qos3SetExp 1.3.6.1.4.1.6339.100.11.2.4.1.44 integer read-write
set exp.
                                     qos3SetIpv6DefaultPBR 1.3.6.1.4.1.6339.100.11.2.4.1.45 integer read-write
whether add Default routing of ipv6 type Enumeration: 'enable': 1, 'disable': 0.
                                     qos3SetIpv6Vrf 1.3.6.1.4.1.6339.100.11.2.4.1.46 integer read-write
set the vrf of ipv6 type.
                                     qos3SetIpv6NextHop 1.3.6.1.4.1.6339.100.11.2.4.1.47 displaystring read-write
set Nexthop IPv6 address
                                     qos3PolicyStatus 1.3.6.1.4.1.6339.100.11.2.4.1.48 integer read-write
the status of qos3PolicyTable. destroy(2) will put off the class-map,removeColorAct(3) will clear the color-act, removeAggregateAct(4) will clear the aggregate-act,removePidAct(5) will clear the value while you set int pidAction. Enumeration: 'removeAggregateAct': 4, 'removeColorAct': 3, 'createAndGo': 0, 'removePidAct': 5, 'active': 1, 'destroy': 2.
                             qos3PortTable 1.3.6.1.4.1.6339.100.11.2.5 no-access
qos port configration.
                                 qos3PortEntry 1.3.6.1.4.1.6339.100.11.2.5.1 no-access
entry for port configuration of qos about trust,cos value,queue drop-algorithm and queue algorithm.
                                     qos3PortIndex 1.3.6.1.4.1.6339.100.11.2.5.1.1 integer read-only
port index.
                                     qos3PortCos 1.3.6.1.4.1.6339.100.11.2.5.1.2 integer read-write
set default cos of the port.
                                     qos3PortTrust 1.3.6.1.4.1.6339.100.11.2.5.1.3 bits read-write
set port trust. cosEnable,dscpEnable and expEnable can be set at the same time;cosDisable,dscpDisable and expDisbable can be set at the same time; cosEnable,dscpEnable and expEnable can not be set at the same time with dscpDisable,cosDisable and expDisbable. Bits: 'expEnable': 2, 'dscpEnable': 1, 'cosDisable': 3, 'expDisbable': 5, 'dscpDisable': 4, 'cosEnable': 0.
                                     qos3PortWredEnable 1.3.6.1.4.1.6339.100.11.2.5.1.4 integer read-write
set the drop Algorithm of port's queue. Enumeration: 'wred': 1, 'tail': 0.
                                     qos3PortQueueAlgorithm 1.3.6.1.4.1.6339.100.11.2.5.1.5 integer read-write
effected the weight Algorithm of port's queue. Enumeration: 'sp': 0, 'wrr': 1, 'wdrr': 2.
                                     qos3PortPassThroughCos 1.3.6.1.4.1.6339.100.11.2.5.1.6 integer read-write
forbid changing the value of cos. Enumeration: 'enable': 1, 'disable': 0.
                                     qos3PortPassThroughDscp 1.3.6.1.4.1.6339.100.11.2.5.1.7 integer read-write
forbid changing the value of dscp. Enumeration: 'enable': 1, 'disable': 0.
                             qos3QueueWeightTable 1.3.6.1.4.1.6339.100.11.2.6 no-access
this table is used for configuring port's weight
                                 qos3QueueWeightEntry 1.3.6.1.4.1.6339.100.11.2.6.1 no-access
entry for queue weight configuration.
                                     qos3QueueWeightPortIndex 1.3.6.1.4.1.6339.100.11.2.6.1.1 integer read-only
port index.
                                     qos3QueueWeightType 1.3.6.1.4.1.6339.100.11.2.6.1.2 integer read-only
choose the algorithm weight that you want to set. Enumeration: 'wrr': 0, 'wdrr': 1.
                                     qos3QueueWeight0 1.3.6.1.4.1.6339.100.11.2.6.1.3 integer read-write
wrr default value is 1,wdrr default value is 10.
                                     qos3QueueWeight1 1.3.6.1.4.1.6339.100.11.2.6.1.4 integer read-write
wrr default value is 2,wdrr default value is 20
                                     qos3QueueWeight2 1.3.6.1.4.1.6339.100.11.2.6.1.5 integer read-write
wrr default value is 3,wdrr default value is 40
                                     qos3QueueWeight3 1.3.6.1.4.1.6339.100.11.2.6.1.6 integer read-write
wrr default value is 4,wdrr default value is 80
                                     qos3QueueWeight4 1.3.6.1.4.1.6339.100.11.2.6.1.7 integer read-write
wrr default value is 5,wdrr default value is 160
                                     qos3QueueWeight5 1.3.6.1.4.1.6339.100.11.2.6.1.8 integer read-write
wrr default value is 6,wdrr default value is 320
                                     qos3QueueWeight6 1.3.6.1.4.1.6339.100.11.2.6.1.9 integer read-write
wrr default value is 7,wdrr default value is 640
                                     qos3QueueWeight7 1.3.6.1.4.1.6339.100.11.2.6.1.10 integer read-write
wrr default value is 8,wdrr default value is 1280
                                     qos3QueueWeightStatus 1.3.6.1.4.1.6339.100.11.2.6.1.11 integer read-write
the status of qos3QueueWeightTable. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             qos3QueueBindWidthTable 1.3.6.1.4.1.6339.100.11.2.7 no-access
this table is used for setting bindwidth of port.
                                 qos3QueueBindWidthEntry 1.3.6.1.4.1.6339.100.11.2.7.1 no-access
entry for Queue BindWidth configuration.
                                     qos3QueueBindWidthPortIndex 1.3.6.1.4.1.6339.100.11.2.7.1.1 integer read-only
port index.
                                     qos3QueueBindWidthQueueId 1.3.6.1.4.1.6339.100.11.2.7.1.2 integer read-only
queue id
                                     qos3QueueBindWidthMin 1.3.6.1.4.1.6339.100.11.2.7.1.3 integer read-write
the Smallest bindwidth.
                                     qos3QueueBindWidthMax 1.3.6.1.4.1.6339.100.11.2.7.1.4 integer read-write
the Largest bindwidth.
                                     qos3QueueBindWidthStatus 1.3.6.1.4.1.6339.100.11.2.7.1.5 integer read-write
the status of qos3QueueBindWidthTable Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             qos3QueueWredTable 1.3.6.1.4.1.6339.100.11.2.8 no-access
this table is used for configuring the drop Algorithm of queue
                                 qos3QueueWredEntry 1.3.6.1.4.1.6339.100.11.2.8.1 no-access
entry for queue wred configuration.
                                     qos3QueueWredPortIndex 1.3.6.1.4.1.6339.100.11.2.8.1.1 integer read-only
port index.
                                     qos3QueueWredQueueId 1.3.6.1.4.1.6339.100.11.2.8.1.2 integer read-only
queue id.
                                     qos3QueueWredDp 1.3.6.1.4.1.6339.100.11.2.8.1.3 integer read-only
drop Priority.
                                     qos3QueueWredDpStart 1.3.6.1.4.1.6339.100.11.2.8.1.4 integer read-write
the smallist queue length when the queue start Discard packet.
                                     qos3QueueWredDpEnd 1.3.6.1.4.1.6339.100.11.2.8.1.5 integer read-write
the Largest queue length when the queue start Discard packet
                                     qos3QueueWredDpMaxRate 1.3.6.1.4.1.6339.100.11.2.8.1.6 integer read-write
the max Discard Probability
                                     qos3QueueWredStatus 1.3.6.1.4.1.6339.100.11.2.8.1.7 integer read-write
the status of qos3QueueWredEntry Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             qos3MapTable 1.3.6.1.4.1.6339.100.11.2.9 no-access
this table is used for setting map between priorities(eg:cos,intp).
                                 qos3MapEntry 1.3.6.1.4.1.6339.100.11.2.9.1 no-access
entry for mls qos map configuration.
                                     qos3MapType 1.3.6.1.4.1.6339.100.11.2.9.1.1 integer read-only
the type of map,if the range of intp value beyonds 0-7,please config it in qos3MapIntpExtendTable. Enumeration: 'intpToCos': 4, 'cosToDscpGreen': 10, 'cosToIntp': 0, 'cosToCosRed': 9, 'cosToCosGreen': 7, 'cosToDscpRed': 12, 'cosToCosYellow': 8, 'intpToExp': 6, 'cosToDscpYellow': 11, 'intpToDscp': 5, 'cosToDp': 1, 'expToIntp': 2, 'expToDp': 3.
                                     qos3MapAtoB1 1.3.6.1.4.1.6339.100.11.2.9.1.2 integer read-write
according to maptype,map a to b for the first value.
                                     qos3MapAtoB2 1.3.6.1.4.1.6339.100.11.2.9.1.3 integer read-write
according to maptype,map a to b for the second value.
                                     qos3MapAtoB3 1.3.6.1.4.1.6339.100.11.2.9.1.4 integer read-write
according to maptype,map a to b for the third value.
                                     qos3MapAtoB4 1.3.6.1.4.1.6339.100.11.2.9.1.5 integer read-write
according to maptype,map a to b for the fourth value.
                                     qos3MapAtoB5 1.3.6.1.4.1.6339.100.11.2.9.1.6 integer read-write
according to maptype,map a to b for the fifth value.
                                     qos3MapAtoB6 1.3.6.1.4.1.6339.100.11.2.9.1.7 integer read-write
according to maptype,map a to b for the sixth value.
                                     qos3MapAtoB7 1.3.6.1.4.1.6339.100.11.2.9.1.8 integer read-write
according to maptype,map a to b for the seventh value.
                                     qos3MapAtoB8 1.3.6.1.4.1.6339.100.11.2.9.1.9 integer read-write
according to maptype,map a to b for the eighth value.
                                     qos3MapStatus 1.3.6.1.4.1.6339.100.11.2.9.1.10 integer read-write
the status of qos3MapTable Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             qos3MapDscpTable 1.3.6.1.4.1.6339.100.11.2.10 no-access
this table is used for mapping between dscp and other priorities.
                                   qos3MapDscpEntry 1.3.6.1.4.1.6339.100.11.2.10.1 no-access
entry for mls qos dscp map configuration.
                                       qos3MapDscpType 1.3.6.1.4.1.6339.100.11.2.10.1.1 integer read-only
the type of map Enumeration: 'dscpToCosGreen': 6, 'dscpToDscpRed': 5, 'dscpToIntp': 0, 'dscpToDscpYellow': 4, 'dscpToCosRed': 8, 'dscpToCosYellow': 7, 'dscpToDscpGreen': 3, 'dscpToDscp': 2, 'dscpToDp': 1.
                                       qos3MapDscpIndex 1.3.6.1.4.1.6339.100.11.2.10.1.2 integer read-only
the index of dscp
                                       qos3MapDscpValue 1.3.6.1.4.1.6339.100.11.2.10.1.3 integer read-write
the map value
                                       qos3mapDscpStatus 1.3.6.1.4.1.6339.100.11.2.10.1.4 integer read-write
the status of qos3MapDscpTable Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             qos3ServicePolicyTable 1.3.6.1.4.1.6339.100.11.2.11 no-access
bind the policy to port or vlan.
                                   qos3ServicePolicyEntry 1.3.6.1.4.1.6339.100.11.2.11.1 no-access
entry for qos bind.
                                       qos3ServicePolicyBindType 1.3.6.1.4.1.6339.100.11.2.11.1.1 integer read-only
bind the policy to port or vlan Enumeration: 'vlan': 1, 'port': 0.
                                       qos3ServicePolicyIndex 1.3.6.1.4.1.6339.100.11.2.11.1.2 integer read-only
port index or vlan id
                                       qos3ServicePolicyDirection 1.3.6.1.4.1.6339.100.11.2.11.1.3 integer read-only
the direction of binding Enumeration: 'ext': 2, 'in': 1, 'out': 0.
                                       qos3ServicePolicyName 1.3.6.1.4.1.6339.100.11.2.11.1.4 displaystring read-write
the policy name
                                       qos3SercivePolicyStatus 1.3.6.1.4.1.6339.100.11.2.11.1.5 integer read-write
the status of qos3ServicePolicyTable Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             qos3StatisticClearTable 1.3.6.1.4.1.6339.100.11.2.12 no-access
this table is used for clearing counter statistics
                                   qos3StatisticClearEntry 1.3.6.1.4.1.6339.100.11.2.12.1 no-access
entry for clear statistics of vlan or port.
                                       qos3StatisticClearBindType 1.3.6.1.4.1.6339.100.11.2.12.1.1 integer read-only
bind to port or vlan Enumeration: 'vlan': 1, 'port': 0.
                                       qos3StatisticClearIndex 1.3.6.1.4.1.6339.100.11.2.12.1.2 integer read-only
port index or vlan id
                                       qos3StatisticClearDirection 1.3.6.1.4.1.6339.100.11.2.12.1.3 integer read-only
the direction that you want to clear Enumeration: 'in': 1, 'out': 0.
                                       qos3StatisticClearStatus 1.3.6.1.4.1.6339.100.11.2.12.1.4 integer read-write
the status of qos3StatisticClearTable Enumeration: 'enable': 1, 'disable': 0.
                             qos3Ets 1.3.6.1.4.1.6339.100.11.2.13
                                   qos3EtsTable 1.3.6.1.4.1.6339.100.11.2.13.1 no-access
this table is used for enabling QOS ETS and MC_UC mode.
                                       qos3EtsEntry 1.3.6.1.4.1.6339.100.11.2.13.1.1 no-access
entry for enabling ETS and MC_UC.
                                           qos3EtsPortIndex 1.3.6.1.4.1.6339.100.11.2.13.1.1.1 integer read-only
port index
                                           qos3EtsScheduleStatusConfig 1.3.6.1.4.1.6339.100.11.2.13.1.1.2 integer read-write
config schedule mode. Enumeration: 'ets': 3, 'mc': 2, 'uc': 1, 'normal': 0.
                                           qos3EtsStatus 1.3.6.1.4.1.6339.100.11.2.13.1.1.3 integer read-write
the status of qos3EtsTable. Enumeration: 'enable': 1, 'disable': 0.
                                   qos3McQueueBindWidthTable 1.3.6.1.4.1.6339.100.11.2.13.2 no-access
a list of mc bindWidth configuration.
                                       qos3McQueueBindWidthEntry 1.3.6.1.4.1.6339.100.11.2.13.2.1 no-access
entry for configuring mc bindWidth.
                                           qos3McQueueBindWidthPortIndex 1.3.6.1.4.1.6339.100.11.2.13.2.1.1 integer read-only
port index
                                           qos3McQueueID 1.3.6.1.4.1.6339.100.11.2.13.2.1.2 integer read-only
queue index.
                                           qos3McQueueBindWidthMin 1.3.6.1.4.1.6339.100.11.2.13.2.1.3 integer read-write
minimize vaule of queue bindWidth
                                           qos3McQueueBindWidthMax 1.3.6.1.4.1.6339.100.11.2.13.2.1.4 integer read-write
maximize value of queue bindWidth.
                                           qos3McQueueBindWidthStatus 1.3.6.1.4.1.6339.100.11.2.13.2.1.5 integer read-write
the status of qos3McQueueBindWidthTable. Enumeration: 'enable': 1, 'disable': 0.
                                   qos3SchedulePolicyMapTable 1.3.6.1.4.1.6339.100.11.2.13.3 no-access
this table is used for building a Schedule policy and mapping the named policy to number, if you want to configure a Schedule policy,you must map at here.
                                       qos3SchedulePolicyMapEntry 1.3.6.1.4.1.6339.100.11.2.13.3.1 no-access
entry for building schedule policy.
                                           qos3SchedulePolicyMapIndex 1.3.6.1.4.1.6339.100.11.2.13.3.1.1 integer read-only
the range is 0-(2^64 - 1).
                                           qos3SchedulePolicyName 1.3.6.1.4.1.6339.100.11.2.13.3.1.2 displaystring read-write
the schedule policy name.
                                           qos3SchedulePolicyStatus 1.3.6.1.4.1.6339.100.11.2.13.3.1.3 integer read-write
the status of qos3SchedulePolicyGroupTable. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                   qos3NodeScheduleTable 1.3.6.1.4.1.6339.100.11.2.13.4 no-access
this table is used for building a Schedule node.
                                       qos3NodeScheduleEntry 1.3.6.1.4.1.6339.100.11.2.13.4.1 no-access
entry for building schedule policy.
                                           qos3NodeSchedulePolicyIndex 1.3.6.1.4.1.6339.100.11.2.13.4.1.1 integer read-only
policy index.
                                           qos3NodeScheduleLevelID 1.3.6.1.4.1.6339.100.11.2.13.4.1.2 integer read-only
level ID.
                                           qos3NodeScheduleNodeID 1.3.6.1.4.1.6339.100.11.2.13.4.1.3 integer read-only
node ID. range of it's value is determined by level ID,for level 1,it can only be 1; for level 2 and level 3,the range is 1-4.
                                           qos3NodeScheduleStatus 1.3.6.1.4.1.6339.100.11.2.13.4.1.4 integer read-write
the status of qos3NodeScheduleTable. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                   qos3ScheduleQueueAlgorithmTable 1.3.6.1.4.1.6339.100.11.2.13.5 no-access
this table is used for schedule queue algorithm configuration.
                                       qos3ScheduleQueueAlgorithmEntry 1.3.6.1.4.1.6339.100.11.2.13.5.1 no-access
entry for configuring schedule queue algorithm.
                                           qos3ScheduleQueueAlgorithmPolicyIndex 1.3.6.1.4.1.6339.100.11.2.13.5.1.1 integer read-only
schedule policy map Index.
                                           qos3ScheduleQueueAlgorithmLevelID 1.3.6.1.4.1.6339.100.11.2.13.5.1.2 integer read-only
level ID.
                                           qos3ScheduleQueueAlgorithmNodeID 1.3.6.1.4.1.6339.100.11.2.13.5.1.3 integer read-only
node ID. range of it's value is determined by level ID,for level 1,it can only be 1; for level 2 and level 3,the range is 1-4.
                                           qos3ScheduleQueueAlgorithmConfig 1.3.6.1.4.1.6339.100.11.2.13.5.1.4 integer read-write
schedule queue algorithm. Enumeration: 'sp': 1, 'wrr': 2, 'wdrr': 3, 'rr': 0.
                                           qos3ScheduleQueueAlgorithmStatus 1.3.6.1.4.1.6339.100.11.2.13.5.1.5 integer read-write
the status of qos3ScheduleQueueAlgorithmTable. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                                   qos3ScheduleQueueWeightTable 1.3.6.1.4.1.6339.100.11.2.13.6 no-access
this table is used for schedule queue weight configuration.
                                       qos3ScheduleQueueWeightEntry 1.3.6.1.4.1.6339.100.11.2.13.6.1 no-access
entry for configuring schedule queue weight.
                                           qos3ScheduleQueueWeightPolicyIndex 1.3.6.1.4.1.6339.100.11.2.13.6.1.1 integer read-only
schedule policy map Index.
                                           qos3ScheduleQueueWeightLevelID 1.3.6.1.4.1.6339.100.11.2.13.6.1.2 integer read-only
level ID.
                                           qos3ScheduleQueueWeightNodeID 1.3.6.1.4.1.6339.100.11.2.13.6.1.3 integer read-only
node ID. range of it's value is determined by level ID,for level 1,it can only be 1; for level 2 and level 3,the range is 1-4.
                                           qos3ScheduleQueueAlgorithm 1.3.6.1.4.1.6339.100.11.2.13.6.1.4 integer read-only
queue algorithm. Enumeration: 'wrr': 0, 'wdrr': 1.
                                           qos3ScheduleQueueWeightQueueID 1.3.6.1.4.1.6339.100.11.2.13.6.1.5 integer read-only
queue ID.
                                           qos3ScheduleQueueWeightValue 1.3.6.1.4.1.6339.100.11.2.13.6.1.6 integer read-write
queue weight value.
                                           qos3ScheduleQueueWeightStatus 1.3.6.1.4.1.6339.100.11.2.13.6.1.7 integer read-write
the status of qos3ScheduleQueueWeightTable. Enumeration: 'enable': 1, 'disable': 0.
                                   qos3ScheduleQueueInputTable 1.3.6.1.4.1.6339.100.11.2.13.7 no-access
this table is used for schedule queue input configuration.
                                       qos3ScheduleQueueInputEntry 1.3.6.1.4.1.6339.100.11.2.13.7.1 no-access
entry for configuring schedule queue input.
                                           qos3ScheduleQueueInputPolicyIndex 1.3.6.1.4.1.6339.100.11.2.13.7.1.1 integer read-only
schedule policy map Index.
                                           qos3ScheduleQueueInputLevelID 1.3.6.1.4.1.6339.100.11.2.13.7.1.2 integer read-only
level ID.
                                           qos3ScheduleQueueInputNodeID 1.3.6.1.4.1.6339.100.11.2.13.7.1.3 integer read-only
node ID. range of it's value is determined by level ID,for level 1,it can only be 1; for level 2 and level 3,the range is 1-4.
                                           qos3ScheduleQueueInputQueueID 1.3.6.1.4.1.6339.100.11.2.13.7.1.4 integer read-only
queue ID.
                                           qos3ScheduleQueueInputType 1.3.6.1.4.1.6339.100.11.2.13.7.1.5 integer read-write
input type of queue. Enumeration: 'node': 2, 'mc': 1, 'uc': 0.
                                           qos3ScheduleQueueInputTypeValue 1.3.6.1.4.1.6339.100.11.2.13.7.1.6 integer read-write
value of the input type,the value range for uc is 1-18,the value range for mc is 1-4,the value range for node is 1-4.
                                           qos3ScheduleQueueInputStatus 1.3.6.1.4.1.6339.100.11.2.13.7.1.7 integer read-write
the status of qos3ScheduleBindWidthTable. Enumeration: 'enable': 1, 'disable': 0.
                                   qos3ScheduleBindWidthTable 1.3.6.1.4.1.6339.100.11.2.13.8 no-access
this table is used for schedule bindWidth configuration.
                                       qos3ScheduleBindWidthEntry 1.3.6.1.4.1.6339.100.11.2.13.8.1 no-access
entry for configuring schedule bindWidth.
                                           qos3ScheduleBindWidthPolicyIndex 1.3.6.1.4.1.6339.100.11.2.13.8.1.1 integer read-only
schedule policy map Index.
                                           qos3ScheduleBindWidthLevelID 1.3.6.1.4.1.6339.100.11.2.13.8.1.2 integer read-only
level ID.
                                           qos3ScheduleBindWidthNodeID 1.3.6.1.4.1.6339.100.11.2.13.8.1.3 integer read-only
node ID. range of it's value is determined by level ID,for level 1,it can only be 1; for level 2 and level 3,the range is 1-4.
                                           qos3ScheduleBindWidthMin 1.3.6.1.4.1.6339.100.11.2.13.8.1.4 integer read-write
minimize value of schedule bindWidth.
                                           qos3ScheduleBindWidthMax 1.3.6.1.4.1.6339.100.11.2.13.8.1.5 integer read-write
maximize value of schedule bindWidth.
                                           qos3ScheduleBindWidthStatus 1.3.6.1.4.1.6339.100.11.2.13.8.1.6 integer read-write
the status of qos3ScheduleBindWidthTable. Enumeration: 'enable': 1, 'disable': 0.
                                   qos3SchedulePolicyBindTable 1.3.6.1.4.1.6339.100.11.2.13.9 no-access
this table is used for binding schedule policy to port.
                                       qos3SchedulePolicyBindEntry 1.3.6.1.4.1.6339.100.11.2.13.9.1 no-access
entry for binding schedule policy.
                                           qos3SchedulePolicyBindPortIndex 1.3.6.1.4.1.6339.100.11.2.13.9.1.1 integer read-only
port Index.
                                           qos3SchedulePolicyBindPolicyName 1.3.6.1.4.1.6339.100.11.2.13.9.1.2 displaystring read-write
the schedule policy name.
                                           qos3SchedulePolicyBindStatus 1.3.6.1.4.1.6339.100.11.2.13.9.1.3 integer read-write
the status of qos3SchedulePolicyBindTable. Enumeration: 'enable': 1, 'disable': 0.
                             qos3MapIntpExtendTable 1.3.6.1.4.1.6339.100.11.2.14 no-access
this table is used for mapping between intp and other priorities,the range of value for intp is 0-119.
                                   qos3MapIntpExtendEntry 1.3.6.1.4.1.6339.100.11.2.14.1 no-access
entry for mls qos intp map configuration.
                                       qos3MapIntpExtendType 1.3.6.1.4.1.6339.100.11.2.14.1.1 integer read-only
the type of map Enumeration: 'intpToCos': 0, 'intpToDp': 4, 'intpToQueue': 3, 'intpToIntpRed': 5, 'intpToExp': 2, 'intpToDscp': 1, 'intpToIntpYellow': 6.
                                       qos3MapIntpExtendIndex 1.3.6.1.4.1.6339.100.11.2.14.1.2 integer read-only
the index of intp
                                       qos3MapIntpExtendValue 1.3.6.1.4.1.6339.100.11.2.14.1.3 integer read-write
the map value
                                       qos3mapIntpExtendStatus 1.3.6.1.4.1.6339.100.11.2.14.1.4 integer read-write
the status of qos3MapIntpExtendTable Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             qos3EgressRemark 1.3.6.1.4.1.6339.100.11.2.15
                                   qos3EgressGreenRemark 1.3.6.1.4.1.6339.100.11.2.15.1 integer read-write
enabling egress remark on green packet. Enumeration: 'enable': 1, 'disable': 0.
                             showQos3 1.3.6.1.4.1.6339.100.11.2.16
                                   showQos3VlanTable 1.3.6.1.4.1.6339.100.11.2.16.1 no-access
Show Qos3 Vlan Table
                                       showQos3VlanEntry 1.3.6.1.4.1.6339.100.11.2.16.1.1 no-access
index is vlan id
                                           showQos3VlanId 1.3.6.1.4.1.6339.100.11.2.16.1.1.1 integer no-access
show qos vlan id.
                                           showQos3PolicyDirection 1.3.6.1.4.1.6339.100.11.2.16.1.1.2 integer no-access
QoS Policy direction Enumeration: 'pre': 2, 'ext': 3, 'out': 1, 'in': 0.
                                           showQos3ClassmapName 1.3.6.1.4.1.6339.100.11.2.16.1.1.3 displaystring no-access
QoS class map name
                                           showQos3VlanInCounter 1.3.6.1.4.1.6339.100.11.2.16.1.1.4 counter64 read-only
in vlan counter
                                           showQos3VlanOutCounter 1.3.6.1.4.1.6339.100.11.2.16.1.1.5 counter64 read-only
out vlan counter
                                           showQos3VlanGreenCounter 1.3.6.1.4.1.6339.100.11.2.16.1.1.6 counter64 read-only
green vlan counter
                                           showQos3VlanYellowCounter 1.3.6.1.4.1.6339.100.11.2.16.1.1.7 counter64 read-only
yellow vlan counter
                                           showQos3VlanRedCounter 1.3.6.1.4.1.6339.100.11.2.16.1.1.8 counter64 read-only
red vlan counter
                   primirror 1.3.6.1.4.1.6339.100.12
                         mirrorDestTable 1.3.6.1.4.1.6339.100.12.1 no-access
Destination port for mirrored packets.
                             mirrorDestEntry 1.3.6.1.4.1.6339.100.12.1.1 no-access
Destination port for mirrored packets.
                                 mirrorDestSession 1.3.6.1.4.1.6339.100.12.1.1.1 integer read-only
Session ID.
                                 mirrorDestPort 1.3.6.1.4.1.6339.100.12.1.1.2 displaystring read-only
mirror destination port eg:Ethernet1/1.
                                 mirrorDestStatus 1.3.6.1.4.1.6339.100.12.1.1.3 integer read-only
Status. Enumeration: 'active': 1, 'destroy': 2.
                         mirrorSrcPortTable 1.3.6.1.4.1.6339.100.12.2 no-access
Src port for mirrored packets.
                             mirrorSrcPortEntry 1.3.6.1.4.1.6339.100.12.2.1 no-access
Src port for mirrored packets.
                                 mirrorSrcPortSession 1.3.6.1.4.1.6339.100.12.2.1.1 integer read-only
Session ID.
                                 mirrorSrcPortDirect 1.3.6.1.4.1.6339.100.12.2.1.2 integer read-only
Direction of mirror. Enumeration: 'rx': 1, 'tx': 2.
                                 mirrorSrcPort 1.3.6.1.4.1.6339.100.12.2.1.3 displaystring read-only
mirror source port. eg:Ethernet1/1.
                                 mirrorSrcPortStatus 1.3.6.1.4.1.6339.100.12.2.1.4 integer read-only
Status. Enumeration: 'active': 1, 'destroy': 2.
                         mirrorSrcCpuTable 1.3.6.1.4.1.6339.100.12.3 no-access
Src Cpu for mirrored packets.
                             mirrorSrcCpuEntry 1.3.6.1.4.1.6339.100.12.3.1 no-access
Src Cpu for mirrored packets.
                                 mirrorSrcCpuSession 1.3.6.1.4.1.6339.100.12.3.1.1 integer read-only
Session ID.
                                 mirrorSrcCpuDirect 1.3.6.1.4.1.6339.100.12.3.1.2 integer read-only
Direction of mirror. Enumeration: 'rx': 1, 'tx': 2.
                                 mirrorSrcCpuSlot 1.3.6.1.4.1.6339.100.12.3.1.3 integer read-only
Src cpu slot index.
                                 mirrorSrcCpuStatus 1.3.6.1.4.1.6339.100.12.3.1.4 integer read-only
Status. Enumeration: 'active': 1, 'destroy': 2.
                         mirrorReflectorPortTable 1.3.6.1.4.1.6339.100.12.4 no-access
mirror reflector destination port configuration Table of Rspan. The information about the reflector destination port and its associated session will be specified by this table,which will not present itself in the mirrorDestTable. Which means the mirrorReflectorPortTable and the mirrorDestTable is independent from each other.
                             mirrorReflectorPortEntry 1.3.6.1.4.1.6339.100.12.4.1 no-access
mirror destination port configuration of Rspan.
                                 mirrorReflectorPortSession 1.3.6.1.4.1.6339.100.12.4.1.1 integer read-only
Session ID.
                                 mirrorReflectorPort 1.3.6.1.4.1.6339.100.12.4.1.2 integer read-only
mirror reflector destination port number.
                                 mirrorReflectorPortStatus 1.3.6.1.4.1.6339.100.12.4.1.3 integer read-only
The configuration status of the reflector destination port and its associated session. Enumeration: 'active': 1, 'destroy': 2.
                         mirrorRspanVlanTable 1.3.6.1.4.1.6339.100.12.5 no-access
Vlan configuration Table of Rspan.
                             mirrorRspanVlanEntry 1.3.6.1.4.1.6339.100.12.5.1 no-access
Vlan configuration of Rspan.
                                 mirrorRspanVlan 1.3.6.1.4.1.6339.100.12.5.1.1 integer read-only
Vlan ID.
                                 mirrorRspanVlanStatus 1.3.6.1.4.1.6339.100.12.5.1.2 integer read-only
Vlan status. Enumeration: 'active': 1, 'destroy': 2.
                         mirrorRspanSessionTable 1.3.6.1.4.1.6339.100.12.6 no-access
Session configuration Table of Rspan.When creating an entry, the correctness of both the Vlan ID an the Session ID should be ensured. When destroying an entry, only the correctness of the Session ID is required.
                             mirrorRspanSessionEntry 1.3.6.1.4.1.6339.100.12.6.1 no-access
Session configuration of Rspan.
                                 mirrorRspanSession 1.3.6.1.4.1.6339.100.12.6.1.1 integer read-only
Session ID.
                                 mirrorRspanSessionVlan 1.3.6.1.4.1.6339.100.12.6.1.2 integer read-only
Vlan ID.
                                 mirrorRspanSessionStatus 1.3.6.1.4.1.6339.100.12.6.1.3 integer read-only
The configuration status of the mirror session and its associated Rspan Vlan. Enumeration: 'active': 1, 'destroy': 2.
                         mirrorDestGreTable 1.3.6.1.4.1.6339.100.12.7 no-access
Destination port for mirrored packets.
                             mirrorDestGreEntry 1.3.6.1.4.1.6339.100.12.7.1 no-access
Destination port for mirrored packets.
                                 mirrorDestGreSession 1.3.6.1.4.1.6339.100.12.7.1.1 integer read-only
Session ID.
                                 mirrorDestGrePort 1.3.6.1.4.1.6339.100.12.7.1.2 integer read-only
configure GRE port index.
                                 mirrorDestMacAddr 1.3.6.1.4.1.6339.100.12.7.1.3 macaddress read-only
MAC address of equipment contacted with destination inferface.
                                 mirrorDestIP 1.3.6.1.4.1.6339.100.12.7.1.4 ipaddress read-only
GRE destination IP address.
                                 mirrorSrcIP 1.3.6.1.4.1.6339.100.12.7.1.5 ipaddress read-only
GRE source IP address.
                                 mirrorDestGreStatus 1.3.6.1.4.1.6339.100.12.7.1.6 integer read-only
Status. Enumeration: 'active': 1, 'destroy': 2.
                   pridhcp 1.3.6.1.4.1.6339.100.13
                         dhcpRelay 1.3.6.1.4.1.6339.100.13.1
                             dhcpRelayForwardUdpBootps 1.3.6.1.4.1.6339.100.13.1.1 integer read-only
If dhcp rely forward bootps udp broadcast packet,broadcast message bootps. Enumeration: 'noBootps': 0, 'bootps': 1.
                             dhcpRelayServerAddrTable 1.3.6.1.4.1.6339.100.13.1.2 no-access
The role of DHCP Relay Agent is to forward requests and replies between server and client when they are not in the same subnet. To enable DHCP Relay service user needs to specify Relay Server ip address and then restart DHCP Relay. This Table is to specify Relay Server ip address, the maximum numbers of server ip address user can specify is 5. To Restart DHCP Relay, please use the dhcpRelayRestart variable.
                                 dhcpRelayServerAddrEntry 1.3.6.1.4.1.6339.100.13.1.2.1 no-access
A conceptual row of dhcpRelayServerAddrTable.
                                     dhcpRelayServerAddrVlanId 1.3.6.1.4.1.6339.100.13.1.2.1.1 integer no-access
The ID of VLAN interface used by this table entry.
                                     dhcpRelayServerAddrIndex 1.3.6.1.4.1.6339.100.13.1.2.1.2 integer no-access
The index of relay address set in the VLAN interface.
                                     dhcpRelayServerAddrServerIp 1.3.6.1.4.1.6339.100.13.1.2.1.3 ipaddress read-write
Appoint the destination address used for DHCP relay.
                                     dhcpRelayServerAddrStatus 1.3.6.1.4.1.6339.100.13.1.2.1.4 integer read-write
Configuration status. Enumeration: 'active': 1, 'destroy': 2.
                             dhcpRelayOption82Enalbe 1.3.6.1.4.1.6339.100.13.1.3 integer read-only
If set(0), disable dhcp relay option82 function, set(1),then enable dhcp relay option82 function. Enumeration: 'noEnable': 0, 'enable': 1.
                             dhcpRelayInformationOptionRemoteIDFormat 1.3.6.1.4.1.6339.100.13.1.4 integer read-only
If set(0), then use vlan mac address as the default format, set(1), use vs-hp format to keep compatibility with HP. Enumeration: 'default': 0, 'vs-hp': 1.
                             dhcpRelayInformationOptionRemoteID 1.3.6.1.4.1.6339.100.13.1.5 displaystring read-only
If input the 'standard' string ,then use vlan mac address format for option82 sub-option 2, other strings are used as romote ID of option82 sub-option 2, the default string is 'standard'.
                             dhcpRelayInformationOptionSubscriberIDFormat 1.3.6.1.4.1.6339.100.13.1.6 integer read-only
If set(0), then use hex format of vlan and mac address, set(1), use ACSII format of vlan and mac address, set(2), use vs-hp format to keep compatibility with HP, the default value is set(1). Enumeration: 'acsii': 1, 'vs-hp': 2, 'hex': 0.
                             dhcpServerRelayInformationEnable 1.3.6.1.4.1.6339.100.13.1.7 integer read-only
If set(0), disable the option82 relay function on dhcp server, the dhcp server neglects the option82 information, set(1), then enable the option82 relay function on dhcp server,then dhcp server starts to identify option82 information. Enumeration: 'noEnable': 0, 'enable': 1.
                             dhcpRelayInformationOptionDelimiter 1.3.6.1.4.1.6339.100.13.1.8 integer read-only
If set(0), then use colon to compart sub-option parameters, set(1), use dot to compart sub-option parameters, set(2), use slash to compart sub-option parameters, set(3), use space to compart sub-option parameters, the default value is set(2). Enumeration: 'colon': 0, 'slash': 2, 'dot': 1, 'space': 3.
                             dhcpRelayOptionSelfDefinedSubscriberIDFormat 1.3.6.1.4.1.6339.100.13.1.9 integer read-only
If set(0), then use hex format to generate sub-scriber ID, set(1), use ASCII format to generate sub-scriber ID, the default value is set(1). Enumeration: 'ascii': 1, 'hex': 0.
                             dhcpRelayOptionSelfDefinedRemoteIDFormat 1.3.6.1.4.1.6339.100.13.1.10 integer read-only
If set(0), then use hex format to generate remote ID, set(1), use ASCII format to generate remote ID, the default value is set(1). Enumeration: 'ascii': 1, 'hex': 0.
                             dhcpRelayOptionSelfDefinedSubscriberID 1.3.6.1.4.1.6339.100.13.1.11 displaystring read-only
If user does not configure the circuit-id of option82 explicitly on a port, then the user can self define format to generate the circuit-id, the format options include vlan, port, ID, self-designed string, the subscriber ID may be only one or any combination of them, and is strictly generated according to the sequence of format options, the ID option includes switch ID and remote-mac, but the user just select only one of them, also In the swtich ID, it includes mac and hostname options, the user just select only one of two, the maximum length of self-designed striing is 64. If user input the string 'NULL', then delete the last configuration. For example, if select vlan ,ID(swtich-id(mac)), and string 'str' format, the user input the string like as 'vlan id swtich-id mac string str'.
                             dhcpRelayOptionSelfDefinedRemoteID 1.3.6.1.4.1.6339.100.13.1.12 displaystring read-only
If user does not configure the remote-id of option82 explicitly on a port, then the user can self define format to generate the remote-id, the format options include mac,hostname and self-designed string, the remote ID may be only one or any combination of them, and is strictly generated according to the sequence of format options, the maximum length of self-designed striing is 32. If user input the string 'NULL', then delete the last configuration. For example, if select hostname,mac,and string 'str' format, the user input the string like as 'hostname mac string str'.
                             dhcpRelayOption82InterfaceConfigureTable 1.3.6.1.4.1.6339.100.13.1.13 no-access
After enable the option82 relay function ,the swith must adopt some forwarding policy, and use specified format for subscriber ID to handle receving the dhcp request packets according to specified port.
                                   dhcpRelayOption82InterfaceConfigureEntry 1.3.6.1.4.1.6339.100.13.1.13.1 no-access
A conceptual row of dhcpRelayOption82InterfaceConfigureTable.
                                       dhcpRelayOption82Vid 1.3.6.1.4.1.6339.100.13.1.13.1.1 integer no-access
The Vlan interface being used by this table entry. Only the Vlan interfaces which have an IP configured will appear in the table.
                                       dhcpRelayOption82ForwardPolicy 1.3.6.1.4.1.6339.100.13.1.13.1.2 integer read-write
If set(1), then drop the dhcp request packets with option82 sub-option, set(2), keep the dhcp request packets with option82 sub-option and forward to the dhcp server, set(3), the systerm replace the option82 sub-option of dhcp request packets with its own option82 sub-option, the default value is set(3). Enumeration: 'replace': 3, 'drop': 1, 'keep': 2.
                                       dhcpRelayOption82SubscriberID 1.3.6.1.4.1.6339.100.13.1.13.1.3 displaystring read-write
If input the 'standard' string ,then use vlan and physical port format for option82 sub-option 1, other string, that be used as circuit-id of option82 sub-option 1, the default string is 'standard'.
                         dhcpServer 1.3.6.1.4.1.6339.100.13.2
                             dhcpServerServiceStatus 1.3.6.1.4.1.6339.100.13.2.1 integer read-only
Setting this to 1 to enable the dhcp server service. Setting this to 2 to disable the dhcp server service. Enumeration: 'enable': 1, 'disable': 0.
                             dhcploggingStatus 1.3.6.1.4.1.6339.100.13.2.2 integer read-only
Setting this to 1 to enable the dhcp conflict logging. Setting this to 0 to disable the dhcp conflict logging. Enumeration: 'enable': 1, 'disable': 0.
                             dhcpPool 1.3.6.1.4.1.6339.100.13.2.3
                                 dhcpPoolTable 1.3.6.1.4.1.6339.100.13.2.3.1 no-access
A dhcp pool is a collection of user configuration such as option config-lease time or dns-server IPs, a network address for network pool, or a host IP plus a hardware address pair for host pool. However, a dhcp pool only can either be a network pool or a host pool, or none of them (such as that pool only containing option config no network address config or a host ip config as well)
                                     dhcpPoolEntry 1.3.6.1.4.1.6339.100.13.2.3.1.1 no-access
A conceptual row of dhcpPoolTable.
                                         dhcpPoolPoolName 1.3.6.1.4.1.6339.100.13.2.3.1.1.1 displaystring no-access
PoolName, simply specify a string.
                                         dhcpPoolStatus 1.3.6.1.4.1.6339.100.13.2.3.1.1.2 integer read-only
accession delete the pool,according to dhcpPoolName Enumeration: 'active': 1, 'destroy': 0.
                                         dhcpPoolAddressType 1.3.6.1.4.1.6339.100.13.2.3.1.1.3 integer read-only
configure dhcppool of address style Enumeration: 'host': 2, 'network': 1.
                                         dhcpPoolAddress 1.3.6.1.4.1.6339.100.13.2.3.1.1.4 ipaddress read-only
configurate dhcp pool. if dhcpPoolAddressType=1 configurate address range, if dhcpPoolAddressType=2 configurate single address
                                         dhcpPoolAddressPrefix 1.3.6.1.4.1.6339.100.13.2.3.1.1.5 ipaddress read-only
dhcp pool ip address prefix
                                         dhcpPoolAddressStatus 1.3.6.1.4.1.6339.100.13.2.3.1.1.6 integer read-only
address of configuration satus Enumeration: 'active': 1, 'destroy': 0.
                                         dhcpPoolMacAddress 1.3.6.1.4.1.6339.100.13.2.3.1.1.7 displaystring read-only
appoint user of hardware address.Condition: dhcpPoolAddressType(2).
                                         dhcpPoolProType 1.3.6.1.4.1.6339.100.13.2.3.1.1.8 integer read-only
RFC define protocol style of number express,Condition:dhcpPoolAddressType(2).
                                         dhcpPoolMacStatus 1.3.6.1.4.1.6339.100.13.2.3.1.1.9 integer read-only
hardware address configure status.Condition: dhcpPoolAddressType(2). Enumeration: 'active': 1, 'destroy': 0.
                                 dhcpPoolExpandTable 1.3.6.1.4.1.6339.100.13.2.3.2 no-access
A dhcp pool is a collection of user configuration such as option config-lease time or dns-server IPs, a network address for network pool, or a host IP plus a hardware address pair for host pool. However, a dhcp pool only can either be a network pool or a host pool, or none of them (such as that pool only containing option config no network address config or a host ip config as well)
                                     dhcpPoolExpandEntry 1.3.6.1.4.1.6339.100.13.2.3.2.1 no-access
A conceptual row of dhcpPoolExpandTable.
                                         dhcpPoolExpandName 1.3.6.1.4.1.6339.100.13.2.3.2.1.1 displaystring no-access
PoolName, simply specify a string which string size NO MORE THAN 8
                                         dhcpPoolNetbiosNodeType 1.3.6.1.4.1.6339.100.13.2.3.2.1.2 integer read-only
Configure DHCP client of node style. For example, Broadcast node 1, Peer-to-peer node 2, Mixed node 4, Hybrid node 8
                                         dhcpPoolDomainName 1.3.6.1.4.1.6339.100.13.2.3.2.1.3 displaystring read-only
DHCP client configure domain name
                                         dhcpPoolBootFile 1.3.6.1.4.1.6339.100.13.2.3.2.1.4 displaystring read-only
configure DHCP client boot-file name
                                         dhcpPoolCLid 1.3.6.1.4.1.6339.100.13.2.3.2.1.5 displaystring read-only
set dhcp pool client id. Condition: the pool of address is handcraft bind
                                         dhcpPoolExpandstatus 1.3.6.1.4.1.6339.100.13.2.3.2.1.7 integer read-only
if configure is valid(0),and the list of all configuration operatation accession if configure is destroy(1),and the list of all configuration operation delet Enumeration: 'destroy': 1, 'valid': 0.
                             dhcpLeaseTimeTable 1.3.6.1.4.1.6339.100.13.2.4 no-access
configure rent term in address pool
                                 dhcpLeaseTimeEntry 1.3.6.1.4.1.6339.100.13.2.4.1 no-access
configure rent term in address pool
                                     dhcpLeaseTimePoolName 1.3.6.1.4.1.6339.100.13.2.4.1.1 displaystring no-access
PoolName, simply specify a string which string size NO MORE THAN 8
                                     dhcpLeaseTimeType 1.3.6.1.4.1.6339.100.13.2.4.1.2 integer read-only
rent time style,0 is temporarily rent,1 is forever rent Enumeration: 'infinite': 1, 'temp': 0.
                                     dhcpLeaseTimeDay 1.3.6.1.4.1.6339.100.13.2.4.1.3 integer read-only
day,condition:dhcpLeaseTimeType=temp(0).
                                     dhcpLeaseTimeHours 1.3.6.1.4.1.6339.100.13.2.4.1.4 integer read-only
hour,condition:dhcpLeaseTimeType=temp(0).
                                     dhcpLeaseTimeMinutes 1.3.6.1.4.1.6339.100.13.2.4.1.5 integer read-only
hour,condition:dhcpLeaseTimeType=temp(0).
                                     dhcpLeaseTimeStatus 1.3.6.1.4.1.6339.100.13.2.4.1.6 integer read-only
Setting this to active(1) creates an entry. Setting this to destroy(2) destroys an entry. default status is 0,no opperation Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             dhcpPoolOptionTable 1.3.6.1.4.1.6339.100.13.2.5 no-access
configure pool of optional parameters
                                 dhcpPoolOptionEntry 1.3.6.1.4.1.6339.100.13.2.5.1 no-access
configure pool of optional parameters
                                     dhcpPoolOptionName 1.3.6.1.4.1.6339.100.13.2.5.1.1 displaystring no-access
PoolName, simply specify a string which string size NO MORE THAN 8
                                     dhcpPoolOptionIndex 1.3.6.1.4.1.6339.100.13.2.5.1.2 integer no-access
The index of option which has been set in this pool
                                     dhcpPoolOptionId 1.3.6.1.4.1.6339.100.13.2.5.1.3 integer read-only
dhcpPoolOptionId (0..254)
                                     dhcpPoolOptionType 1.3.6.1.4.1.6339.100.13.2.5.1.4 integer read-only
dhcpPoolOptionType Enumeration: 'ipaddress': 3, 'hex': 2, 'ascii': 1.
                                     dhcpPoolOption 1.3.6.1.4.1.6339.100.13.2.5.1.5 displaystring read-only
if dhcpPoolOptionType=1, ASCII string if dhcpPoolOptionType=2, HEX string if dhcpPoolOptionType=3,IP address
                                     dhcpPoolOptionStatus 1.3.6.1.4.1.6339.100.13.2.5.1.6 integer read-only
optional parameters configure status Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             dhcpServerExcludedIpAddrTable 1.3.6.1.4.1.6339.100.13.2.6 no-access
dhcpServer Excluded IpAddr Table
                                 dhcpServerExcludedIpAddrEntry 1.3.6.1.4.1.6339.100.13.2.6.1 no-access
dhcpServer Excluded IpAddrEntry
                                     dhcpServerExcludedIpAddrLowIp 1.3.6.1.4.1.6339.100.13.2.6.1.1 ipaddress no-access
The excluded IP address, or first IP address in an excluded address range.
                                     dhcpServerExcludedIpAddrHiIp 1.3.6.1.4.1.6339.100.13.2.6.1.2 ipaddress no-access
The last IP address in the excluded address range.
                                     dhcpServerExcludedIpAddrStatus 1.3.6.1.4.1.6339.100.13.2.6.1.3 integer read-only
Setting this to active(1) creates an entry. Setting this to destroy(2) destroys an entry. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             dhcpPoolDnsSerTable 1.3.6.1.4.1.6339.100.13.2.8 no-access
dhcpPool Dns Server Table:the maximum 8 dns is allowed the first dns server has the highest priority.so address1 is highest priority,next is address2,address3...
                                 dhcpPoolDnsSerEntry 1.3.6.1.4.1.6339.100.13.2.8.1 no-access
is DHCP client configure DNS server
                                     dhcpPoolDnsSerPoolName 1.3.6.1.4.1.6339.100.13.2.8.1.1 displaystring no-access
PoolName, simply specify a string which string size NO MORE THAN 8
                                     dhcpPoolDnsSerIpAddress1 1.3.6.1.4.1.6339.100.13.2.8.1.2 ipaddress read-only
IP address,MUST.
                                     dhcpPoolDnsSerIpAddress2 1.3.6.1.4.1.6339.100.13.2.8.1.3 ipaddress read-only
IP address,option
                                     dhcpPoolDnsSerIpAddress3 1.3.6.1.4.1.6339.100.13.2.8.1.4 ipaddress read-only
IP address,option
                                     dhcpPoolDnsSerIpAddress4 1.3.6.1.4.1.6339.100.13.2.8.1.5 ipaddress read-only
IP address,option
                                     dhcpPoolDnsSerIpAddress5 1.3.6.1.4.1.6339.100.13.2.8.1.6 ipaddress read-only
IP address,option
                                     dhcpPoolDnsSerIpAddress6 1.3.6.1.4.1.6339.100.13.2.8.1.7 ipaddress read-only
IP address,option
                                     dhcpPoolDnsSerIpAddress7 1.3.6.1.4.1.6339.100.13.2.8.1.8 ipaddress read-only
IP address,option
                                     dhcpPoolDnsSerIpAddress8 1.3.6.1.4.1.6339.100.13.2.8.1.9 ipaddress read-only
IP address,option
                                     dhcpPoolDnsSerStatus 1.3.6.1.4.1.6339.100.13.2.8.1.10 integer read-only
configure DNS server status Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             dhcpPoolDefaultRouterTable 1.3.6.1.4.1.6339.100.13.2.9 no-access
dhcpPoolDefaultRouterTable: the maximum 8 default gateway address can be set,the first gateway has the highest priority, So address1 has the highest priority,next is address2,address3...
                                 dhcpPoolDefaultRouterEntry 1.3.6.1.4.1.6339.100.13.2.9.1 no-access
DHCP client machine configure default gateway
                                     dhcpPoolDefaultRouterPoolName 1.3.6.1.4.1.6339.100.13.2.9.1.1 displaystring no-access
PoolName, simply specify a string which string size NO MORE THAN 8
                                     dhcpPoolDefaultRouterIpAddress1 1.3.6.1.4.1.6339.100.13.2.9.1.2 ipaddress read-only
IP address,must
                                     dhcpPoolDefaultRouterIpAddress2 1.3.6.1.4.1.6339.100.13.2.9.1.3 ipaddress read-only
IP address,option
                                     dhcpPoolDefaultRouterIpAddress3 1.3.6.1.4.1.6339.100.13.2.9.1.4 ipaddress read-only
IP address,option
                                     dhcpPoolDefaultRouterIpAddress4 1.3.6.1.4.1.6339.100.13.2.9.1.5 ipaddress read-only
IP address,option
                                     dhcpPoolDefaultRouterIpAddress5 1.3.6.1.4.1.6339.100.13.2.9.1.6 ipaddress read-only
IP address,option
                                     dhcpPoolDefaultRouterIpAddress6 1.3.6.1.4.1.6339.100.13.2.9.1.7 ipaddress read-only
IP address,option
                                     dhcpPoolDefaultRouterIpAddress7 1.3.6.1.4.1.6339.100.13.2.9.1.8 ipaddress read-only
IP address,option
                                     dhcpPoolDefaultRouterIpAddress8 1.3.6.1.4.1.6339.100.13.2.9.1.9 ipaddress read-only
IP address,option
                                     dhcpPoolDefaultRouterStatus 1.3.6.1.4.1.6339.100.13.2.9.1.10 integer read-only
configure default gateway state machine Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             dhcpPoolNextServerTable 1.3.6.1.4.1.6339.100.13.2.10 no-access
dhcpPoolNextServerTable
                                   dhcpPoolNextServerEntry 1.3.6.1.4.1.6339.100.13.2.10.1 no-access
dhcpPoolNextServerEntry
                                       dhcpPoolNextServerPoolName 1.3.6.1.4.1.6339.100.13.2.10.1.1 displaystring no-access
PoolName, simply specify a string which string size NO MORE THAN 8
                                       dhcpPoolNextServerIpAddress1 1.3.6.1.4.1.6339.100.13.2.10.1.2 ipaddress read-only
IP address,must
                                       dhcpPoolNextServerIpAddress2 1.3.6.1.4.1.6339.100.13.2.10.1.3 ipaddress read-only
IP address,option
                                       dhcpPoolNextServerIpAddress3 1.3.6.1.4.1.6339.100.13.2.10.1.4 ipaddress read-only
IP address,option
                                       dhcpPoolNextServerIpAddress4 1.3.6.1.4.1.6339.100.13.2.10.1.5 ipaddress read-only
IP address,option
                                       dhcpPoolNextServerIpAddress5 1.3.6.1.4.1.6339.100.13.2.10.1.6 ipaddress read-only
IP address,option
                                       dhcpPoolNextServerIpAddress6 1.3.6.1.4.1.6339.100.13.2.10.1.7 ipaddress read-only
IP address,option
                                       dhcpPoolNextServerIpAddress7 1.3.6.1.4.1.6339.100.13.2.10.1.8 ipaddress read-only
IP address,option
                                       dhcpPoolNextServerIpAddress8 1.3.6.1.4.1.6339.100.13.2.10.1.9 ipaddress read-only
IP address,option
                                       dhcpPoolNextServerStatus 1.3.6.1.4.1.6339.100.13.2.10.1.10 integer read-only
status machine Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             dhcpPoolWinsTable 1.3.6.1.4.1.6339.100.13.2.11 no-access
dhcpPoolWinsTable
                                   dhcpPoolWinsEntry 1.3.6.1.4.1.6339.100.13.2.11.1 no-access
configure Wins sever address
                                       dhcpPoolWinsPoolName 1.3.6.1.4.1.6339.100.13.2.11.1.1 displaystring no-access
PoolName, simply specify a string which string size NO MORE THAN 8
                                       dhcpPoolWinsIpAddress1 1.3.6.1.4.1.6339.100.13.2.11.1.2 ipaddress read-only
IP address,must
                                       dhcpPoolWinsIpAddress2 1.3.6.1.4.1.6339.100.13.2.11.1.3 ipaddress read-only
IP address,option
                                       dhcpPoolWinsIpAddress3 1.3.6.1.4.1.6339.100.13.2.11.1.4 ipaddress read-only
IPaddress,option
                                       dhcpPoolWinsIpAddress4 1.3.6.1.4.1.6339.100.13.2.11.1.5 ipaddress read-only
IP address,option
                                       dhcpPoolWinsIpAddress5 1.3.6.1.4.1.6339.100.13.2.11.1.6 ipaddress read-only
IP address,option
                                       dhcpPoolWinsIpAddress6 1.3.6.1.4.1.6339.100.13.2.11.1.7 ipaddress read-only
IP address,option
                                       dhcpPoolWinsIpAddress7 1.3.6.1.4.1.6339.100.13.2.11.1.8 ipaddress read-only
IP address,option
                                       dhcpPoolWinsIpAddress8 1.3.6.1.4.1.6339.100.13.2.11.1.9 ipaddress read-only
IP address,option
                                       dhcpPoolWinsStatus 1.3.6.1.4.1.6339.100.13.2.11.1.10 integer read-only
configure wins server status machine Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                             dhcpServerLeaseBindingTable 1.3.6.1.4.1.6339.100.13.2.12 no-access
express IP address and MAC address bind status
                                   dhcpServerLeaseBindingEntry 1.3.6.1.4.1.6339.100.13.2.12.1 no-access
express IP address and MAC address bind status
                                       dhcpServerLeaseBindingIp 1.3.6.1.4.1.6339.100.13.2.12.1.1 ipaddress read-only
certain address appointed, format is x.x.x.x
                                       dhcpServerLeaseBindingType 1.3.6.1.4.1.6339.100.13.2.12.1.2 integer read-only
manual express handcraft bind style;dynamic express dynamic distribution style Enumeration: 'dynamic': 2, 'manual': 1.
                                       dhcpServerLeaseBindingMac 1.3.6.1.4.1.6339.100.13.2.12.1.3 displaystring read-only
MAC address
                                       dhcpServerLeaseBindingLeaseTime 1.3.6.1.4.1.6339.100.13.2.12.1.4 integer read-only
rent term
                         dhcpSnooping 1.3.6.1.4.1.6339.100.13.3
                             dhcpSnoopingEnable 1.3.6.1.4.1.6339.100.13.3.1 integer read-only
Enable the dhcp snooping function. Enumeration: 'noEnable': 0, 'enable': 1.
                             dhcpSnoopingBindingEnalbe 1.3.6.1.4.1.6339.100.13.3.2 integer read-only
Enable the dhcp snooping binding function. Enumeration: 'noEnable': 0, 'enable': 1.
                             dhcpSnoopingVlanEnable 1.3.6.1.4.1.6339.100.13.3.3 octet string read-only
Enable the dhcp snooping on vlan list string, the vlan list string is input like as '1-2'. If the next time input the string '3-5',then the final vlan list is '1-5'.If input the string 'NULL',then delete the whole vlan list.
                             dhcpSnoopingInformationEnalbe 1.3.6.1.4.1.6339.100.13.3.4 integer read-only
Enable the dhcp snooping information function. Enumeration: 'noEnable': 0, 'enable': 1.
                             dhcpSnoopingLimitRate 1.3.6.1.4.1.6339.100.13.3.5 integer read-only
Configration of dhcp packets rate on the switch, the default rate of dhcp packets received is 100 pps.
                             dhcpSnoopingActionMaxNum 1.3.6.1.4.1.6339.100.13.3.6 integer read-only
Configration of the maximum number of dhcp snooping action on a port, the default value is 10.
                             dhcpSnoopingbindingARP 1.3.6.1.4.1.6339.100.13.3.7 integer read-only
If set(0), the static ARP entry is not added when the dhcp snooping is created, if set(1), the static ARP entry is added according to the dhcp snooping binding, the priority of this static ARP entry is lower than that configured by administrator. Enumeration: 'notBindingARP': 0, 'bindingARP': 1.
                             dhcpSnoopingInformationOptionDelimiter 1.3.6.1.4.1.6339.100.13.3.8 integer read-only
If set(0), then use colon to compart sub-option parameters, set(1), use dot to compart sub-option parameters, set(2), use slash to compart sub-option parameters, set(3), use space to compart sub-option parameters the default value is set(2). Enumeration: 'colon': 0, 'slash': 2, 'dot': 1, 'space': 3.
                             dhcpSnoopingInformationOptionSubscriberIDFormat 1.3.6.1.4.1.6339.100.13.3.9 integer read-only
If set(0), then use hex format of vlan and mac address, set(1), use ACSII format of vlan and mac address, set(2), use vs-hp format to keep compatibility with HP, the default value is set(1). Enumeration: 'acsii': 1, 'vs-hp': 2, 'hex': 0.
                             dhcpSnoopingInformationOptionRemoteID 1.3.6.1.4.1.6339.100.13.3.10 displaystring read-only
If input the 'standard' string ,then use vlan mac address format for option82 sub-option 2, other string, that be used as romote ID of option82 sub-option 2, the default string is 'standard'.
                             dhcpSnoopingInformationOptionAllowUntrusted 1.3.6.1.4.1.6339.100.13.3.11 integer read-only
If set(0), the dhcp packets with option82 are discarded, if set (1), the dhcp packets with option82 are permitted, and the content of option82 is not changed. Enumeration: 'allowUntrusted': 1, 'notAllowUntrusted': 0.
                             dhcpSnoopingOptionSelfDefinedSubscriberIDFormat 1.3.6.1.4.1.6339.100.13.3.12 integer read-only
If set(0), then use ASCII format to generate sub-scriber ID, set(1), use hex format to generate sub-scriber ID, the default value is set(1). Enumeration: 'ascii': 1, 'hex': 0.
                             dhcpSnoopingOptionSelfDefinedRemoteIDFormat 1.3.6.1.4.1.6339.100.13.3.13 integer read-only
If set(0), then use ASCII format to generate remote ID, set(1), use hex format to generate remote ID, the default value is set(1). Enumeration: 'ascii': 1, 'hex': 0.
                             dhcpSnoopingOptionSelfDefinedSubscriberID 1.3.6.1.4.1.6339.100.13.3.14 displaystring read-only
If user does not configure the circuit-id of option82 explicitly on a port, then the user can self define format to generate the circuit-id, the format options include vlan, port, ID, self designed string, the subscriber ID may be only one or any combination of them,and is strictly generated according to the sequence of format options, the ID option includes switch ID and remote-mac, but the user just selects only one of them, also In the swtich ID, it includes mac and hostname options, the user just selects only one of two, the maximum length of self-designed striing is 64. if user inputs the string 'NULL', then delete the last configuration. For example, if select vlan ,ID(swtich-id(mac)), and string 'str' format, the user can input the string like as 'vlan id swtich-id mac string str'.
                             dhcpSnoopingOptionSelfDefinedRemoteID 1.3.6.1.4.1.6339.100.13.3.15 displaystring read-only
If user does not configure the remote-id of option82 explicitly on a port, then the user can self define format to generate the remote-id, the format options include mac,hostname and self designed string, the remote ID may be only one or any combination of them,and is strictly generated according to the sequence of format options, the maximum length of self designed striing is 32. If user inputs the string 'NULL', then delete the last configuration. For example, if select hostname,mac,and string 'str' format, the user can input the string like as 'hostname mac string str'.
                             dhcpSnoopingClearBinding 1.3.6.1.4.1.6339.100.13.3.16 displaystring read-only
Clear the dhcp snooping bindings, the user can specify the mac address and vlan ID, or interface name and vlan ID ,or vlan ID, if input 'all' string, then clear all of the bindings,if input 'mac 00-24-e3-3a-f3-24 vlan 2', then clear the bindings with mac address 00-24-e3-3a-f3-24 in the vlan 2, if input 'interface ethernet0/0/1 vlan 2', then clear all of the bidings on the interface ethernet0/0/1 in the vlan 2, if input 'vlan 1' string ,then clear all of bindings in the vlan 1.
                             dhcpSnoopingPortConfigTable 1.3.6.1.4.1.6339.100.13.3.17 no-access
After enable the dhcp snooping function, the administrator can configure the port information.
                                   dhcpSnoopingPortConfigEntry 1.3.6.1.4.1.6339.100.13.3.17.1 no-access
A conceptual row of dhcpSnoopingPortConfigTable.
                                       dhcpSnoopingPortIndex 1.3.6.1.4.1.6339.100.13.3.17.1.1 integer no-access
Configure the dhcp snooping function on the specified port.
                                       dhcpSnoopingUserControlMaxNum 1.3.6.1.4.1.6339.100.13.3.17.1.2 integer read-only
Configure the maximum of the binding users on a port, the range of binding users number is 0-1024,the default number is 1024.
                                       dhcpSnoopingUserControl 1.3.6.1.4.1.6339.100.13.3.17.1.3 integer read-only
If set(0), not enable the user control function on a specified port, if set(1), enable the user control function on a specified port, the default value is set(0). Enumeration: 'enable': 1, 'notEnable': 0.
                                       dhcpSnoopingTrust 1.3.6.1.4.1.6339.100.13.3.17.1.4 octet string read-only
Configure trust function on a port or vlan list string.If input the string 'all', then trust all the vlan. If input the string '1-2', then only trust the DHCP packets with that vlan ID is 1 or 2. If input string 'NULL', then close the trust function on the port.
                                       dhcpSnoopingBindingDot1x 1.3.6.1.4.1.6339.100.13.3.17.1.5 integer read-only
If set(0), not enable to notify dhcp snooping binding information to Dot1x module, if set(1), enable to notify dhcp snooping binding information to Dot1x module, the default value is set(0). Enumeration: 'enable': 1, 'notEnable': 0.
                                       dhcpSnoopingSubScriberID 1.3.6.1.4.1.6339.100.13.3.17.1.6 displaystring read-only
If input the 'standard' string ,then use vlan mac address format for option82 sub-option 2, other string, that be used as romote ID of option82 sub-option 2, the default string is 'standard'.
                                       dhcpSnoopingAlarmCount 1.3.6.1.4.1.6339.100.13.3.17.1.7 integer read-only
Show the alarm count of dhcp snooping on a specified port.
                                       dhcpSnoopingBindingCount 1.3.6.1.4.1.6339.100.13.3.17.1.8 integer read-only
Show the binding count of dhcp snooping on a specified port.
                             dhcpSnoopingPortActionTable 1.3.6.1.4.1.6339.100.13.3.18 no-access
After enable the dhcp snooping function, the administrator can configure the port action.
                                   dhcpSnoopingPortActionEntry 1.3.6.1.4.1.6339.100.13.3.18.1 no-access
A conceptual row of dhcpSnoopingPortActionTable.
                                       dhcpSnoopingPort 1.3.6.1.4.1.6339.100.13.3.18.1.1 integer no-access
Configure the dhcp snooping function on the specified port.
                                       dhcpSnoopingActionType 1.3.6.1.4.1.6339.100.13.3.18.1.2 integer read-only
If set(0), not to add any action, if set(1), add shutdown action , and if set(2), add blackhole action on a port when detectd the DHCP server protended . Enumeration: 'blackhole': 2, 'shutdown': 1, 'noAction': 0.
                                       dhcpSnoopingActionRecoveryTime 1.3.6.1.4.1.6339.100.13.3.18.1.3 integer read-only
Configure the recovery time of action, the range time is 10-3600 seconds, the default value is 30 seconds.
                                       dhcpSnoopingActionStatus 1.3.6.1.4.1.6339.100.13.3.18.1.4 integer read-only
If set(0), then destory an aciton configured previously, if set(1), then configure an action on a port. Enumeration: 'active': 1, 'destroy': 0.
                             dhcpSnoopingStaticBindingTable 1.3.6.1.4.1.6339.100.13.3.19 no-access
After enable the dhcp snooping function, the administrator can configure or delete the dhcp snooping static binding.
                                   dhcpSnoopingStaticBindingEntry 1.3.6.1.4.1.6339.100.13.3.19.1 no-access
A conceptual row of dhcpSnoopingStaticBindingTable.
                                       dhcpSnoopingStaticBindingIP 1.3.6.1.4.1.6339.100.13.3.19.1.1 ipaddress no-access
The one IP address just only identifies one ack binding entry.
                                       dhcpSnoopingStaticBindingMAC 1.3.6.1.4.1.6339.100.13.3.19.1.2 octet string read-only
Configure the MAC address of the static binding.
                                       dhcpSnoopingStaticBindingMask 1.3.6.1.4.1.6339.100.13.3.19.1.3 ipaddress read-only
Configure the IP address mask of the static binding.
                                       dhcpSnoopingStaticBindingPort 1.3.6.1.4.1.6339.100.13.3.19.1.4 integer read-only
Configure the port of the static binding.
                                       dhcpSnoopingStaticBindingVid 1.3.6.1.4.1.6339.100.13.3.19.1.5 integer read-only
Configure the vlan ID of the static binding.
                                       dhcpSnoopingStaticBindingStatus 1.3.6.1.4.1.6339.100.13.3.19.1.6 integer read-only
If set(0), then distory a specified static binding that has been configured, if set(1), create a specified static binding according to the input content. Enumeration: 'active': 1, 'destory': 0.
                             dhcpSnoopingAckBindingInfoTable 1.3.6.1.4.1.6339.100.13.3.20 no-access
Show the specified bindings after received the DHCP ACK packets.
                                   dhcpSnoopingAckBindingInfoEntry 1.3.6.1.4.1.6339.100.13.3.20.1 no-access
A conceptual row of dhcpSnoopingAckBindingInfoTable.
                                       dhcpSnoopingAckBindingIP 1.3.6.1.4.1.6339.100.13.3.20.1.1 ipaddress no-access
The one IP address just only identifies one ack binding entry.
                                       dhcpSnoopingAckBindingMAC 1.3.6.1.4.1.6339.100.13.3.20.1.2 octet string read-only
Show the MAC address of the ack binding.
                                       dhcpSnoopingAckBindingPort 1.3.6.1.4.1.6339.100.13.3.20.1.3 integer read-only
Show the port index information of the ack binding.
                                       dhcpSnoopingAckBindingVid 1.3.6.1.4.1.6339.100.13.3.20.1.4 integer read-only
Show the Vid information of the ack bidning.
                                       dhcpSnoopingAckBindingLease 1.3.6.1.4.1.6339.100.13.3.20.1.5 counter32 read-only
Show the lease of the ack binding. The lease of static binding is infinite, the lease of dynamic binding comes from the DHCP reply packets of dhcp server.
                                       dhcpSnoopingAckBindingFlag 1.3.6.1.4.1.6339.100.13.3.20.1.6 displaystring read-only
Show the type of the ack binding. The flag 'S' indentifies the static type binding, 'D' indentifies the dynamic type binding, 'U' indentifies that bindings are uploaded from the server, 'O' indentifies that DHCP request packet is with option82 information, 'X' indentifies that the bindings have been notified Dot1x module, and the client is control under the Dot1x function, 'L' indentifies that the binding entry has been sent to the driver, 'E' indentifies that the notification to Dot1x module is failed.
                             dhcpSnoopingRequestBindingInfoTable 1.3.6.1.4.1.6339.100.13.3.21 no-access
Show the specified bindings after received the DHCP request packets.
                                   dhcpSnoopingRequestBindingInfoEntry 1.3.6.1.4.1.6339.100.13.3.21.1 no-access
A conceptual row of dhcpSnoopingRequestBindingInfoTable.
                                       dhcpSnoopingRequestBindingIP 1.3.6.1.4.1.6339.100.13.3.21.1.1 ipaddress no-access
The one IP address just only identifies one Request binding entry.
                                       dhcpSnoopingRequestBindingMAC 1.3.6.1.4.1.6339.100.13.3.21.1.2 octet string read-only
Show the MAC address of the Request binding.
                                       dhcpSnoopingRequestBindingPort 1.3.6.1.4.1.6339.100.13.3.21.1.3 integer read-only
Show the port index information of the Request binding.
                                       dhcpSnoopingRequestBindingVid 1.3.6.1.4.1.6339.100.13.3.21.1.4 integer read-only
Show the Vid information of the Request binding.
                                       dhcpSnoopingRequestBindingLease 1.3.6.1.4.1.6339.100.13.3.21.1.5 counter32 read-only
Show the lease of the Request binding.
                             dhcpSnoopingAlarmInfoTable 1.3.6.1.4.1.6339.100.13.3.22 no-access
Show the dhcp snooping alarm information.
                                   dhcpSnoopingAlarmInfoEntry 1.3.6.1.4.1.6339.100.13.3.22.1 no-access
A conceptual row of dhcpSnoopingAlarmInfoTable.
                                       dhcpSnoopingAlarmInfoPortIndex 1.3.6.1.4.1.6339.100.13.3.22.1.1 integer no-access
The port sequence of the alarm events.
                                       dhcpSnoopingAlarmInfoNum 1.3.6.1.4.1.6339.100.13.3.22.1.2 integer no-access
The sequence of the alarm events on a port.
                                       dhcpSnoopingAlarmInfoType 1.3.6.1.4.1.6339.100.13.3.22.1.3 integer read-only
Show the type information of the alarm event.
                                       dhcpSnoopingAlarmInfoBlackholeMAC 1.3.6.1.4.1.6339.100.13.3.22.1.4 octet string read-only
Show the blackhole mac address of the alarm event.
                                       dhcpSnoopingAlarmInfoRecoveryTime 1.3.6.1.4.1.6339.100.13.3.22.1.5 displaystring read-only
Show the recovery time of the alarm event.
                                       dhcpSnoopingAlarmInfoRecoveryActionStatus 1.3.6.1.4.1.6339.100.13.3.22.1.6 integer read-only
Show the status of the recovery action.
                             dhcpSnoopingStatisticTable 1.3.6.1.4.1.6339.100.13.3.23
                                   dhcpSnoopingStatisticAlarmNum 1.3.6.1.4.1.6339.100.13.3.23.1 integer read-only
Show the total number of the alarm events.
                                   dhcpSnoopingStatisticAckBindingNum 1.3.6.1.4.1.6339.100.13.3.23.2 integer read-only
Show the total number of the ack bindings.
                                   dhcpSnoopingStatisticRequestBindingNum 1.3.6.1.4.1.6339.100.13.3.23.3 integer read-only
Show the total number of the request bindings.
                                   dhcpSnoopingStatisticDropPktsNum 1.3.6.1.4.1.6339.100.13.3.23.4 integer read-only
Show the total number of the drop packets.
                                   dhcpSnoopingStatisticDiscardPktsNum 1.3.6.1.4.1.6339.100.13.3.23.5 integer read-only
Show the total number of the discarded packets.
                   priportGroup 1.3.6.1.4.1.6339.100.14
                         systemPriority 1.3.6.1.4.1.6339.100.14.1 integer read-only
Modify the system priority which is used by port group.
                         portGroupTable 1.3.6.1.4.1.6339.100.14.2 no-access
This table contains port group information associated with the local system known to this agent.
                             portGroupEntry 1.3.6.1.4.1.6339.100.14.2.1 no-access
Configure the port group information.
                                 portGroupIndex 1.3.6.1.4.1.6339.100.14.2.1.1 integer no-access
Port group number.
                                 portGroupMemberCount 1.3.6.1.4.1.6339.100.14.2.1.2 integer read-only
The number of port group member.
                                 loadBalance 1.3.6.1.4.1.6339.100.14.2.1.3 integer read-only
Load balancing method: dst-src-mac(1):destination and source mac address; dst-src-ip(2):destination and source ip address; src-mac(3):source mac address; dst-mac(4):destination mac address; src-ip(5):source ip address; dst-ip(6):destination ip address; dst-src-mac-ip(7):destination and source mac address, ip address; enhance-profile(8):enhance-profile. If there is no member in the port group, the value is -1. If you set value to the load balance method that your switch is not unsupported, it will return error. Please see the handbook and make sure that the load balance method is supported by your switch. Enumeration: 'dst-mac': 4, 'src-mac': 3, 'src-ip': 5, 'dst-src-ip': 2, 'dst-src-mac': 1, 'dst-ip': 6, 'dst-src-mac-ip': 7, 'enhance-profile': 8.
                                 portGroupInfo 1.3.6.1.4.1.6339.100.14.2.1.4 displaystring read-only
Port group brief information. Format is ID, Mode, Partner ID, Ports and Load-balance. If there is no member in the port group, the value is empty.
                         portGroupPortListTable 1.3.6.1.4.1.6339.100.14.3 no-access
This table contains port group member information associated with the local system known to this agent.
                             portGroupPortListEntry 1.3.6.1.4.1.6339.100.14.3.1 no-access
Configure the port group member information.
                                 portGroupMemberIndex 1.3.6.1.4.1.6339.100.14.3.1.1 integer no-access
Port group member index. Format is group number and port index of member.
                                 portGroupMemberName 1.3.6.1.4.1.6339.100.14.3.1.2 displaystring read-only
The name of port group member.
                                 portGroupMemberMode 1.3.6.1.4.1.6339.100.14.3.1.3 integer read-only
The mode of port group member. Enumeration: 'active': 2, 'on': 1, 'passive': 3.
                                 portGroupMemberPriority 1.3.6.1.4.1.6339.100.14.3.1.4 integer read-write
The port priority of port group member. If the port group mode is on, the value is -1.
                                 portGroupMemberTimeout 1.3.6.1.4.1.6339.100.14.3.1.5 integer read-only
The timeout mode of port group member. If the port group mode is on, the value is -1. Enumeration: 'short': 1, 'long': 0.
                                 portGroupMemberStatus 1.3.6.1.4.1.6339.100.14.3.1.6 integer read-only
The status of port group member. If the port group mode is on, the value is -1. Enumeration: 'standby': 2, 'selected': 1, 'unselected': 0.
                   prisnmpMgt 1.3.6.1.4.1.6339.100.15
                         snmpSecurityIpStatus 1.3.6.1.4.1.6339.100.15.1 integer read-only
Enable or disable secure IP address check function on the NMS. Enumeration: 'enable': 1, 'disable': 0.
                         snmpTrapHostStatus 1.3.6.1.4.1.6339.100.15.2 integer read-only
Enable the switch to send Trap message. This command is used for SNMP v1/v2. Enumeration: 'enable': 1, 'disable': 0.
                         snmpRmonStatus 1.3.6.1.4.1.6339.100.15.3 integer read-only
Enable/disable RMON. Enumeration: 'enable': 1, 'disable': 0.
                         securityIpTable 1.3.6.1.4.1.6339.100.15.4 no-access
A list of snmp securityIp entries.
                             securityIpEntry 1.3.6.1.4.1.6339.100.15.4.1 no-access
Configure the secure IP address which is allowed to access the switch on the NMS;
                                 securityIpIndex 1.3.6.1.4.1.6339.100.15.4.1.1 integer no-access
Index.
                                 securityIpAddress 1.3.6.1.4.1.6339.100.15.4.1.2 ipaddress read-only
The address of security.
                                 securityIpStatus 1.3.6.1.4.1.6339.100.15.4.1.3 integer read-only
Writing this to active(1) creates an entry. Writing this to destroy(2) destroys an entry. Enumeration: 'active': 1, 'destroy': 2.
                         trapDestTable 1.3.6.1.4.1.6339.100.15.5 no-access
A list of trap destination entries.
                             trapDestEntry 1.3.6.1.4.1.6339.100.15.5.1 no-access
This entry includes a destination IP address to which to send traps for this community.
                                 trapDestIndex 1.3.6.1.4.1.6339.100.15.5.1.1 integer no-access
Index
                                 trapDestAddress 1.3.6.1.4.1.6339.100.15.5.1.2 ipaddress read-only
The address to send traps.
                                 trapDestVersion 1.3.6.1.4.1.6339.100.15.5.1.3 integer read-only
This variables represent the version of the Trap we wish to send to trap Receiver. If the value is 0, mean we wish to send Version 1 trap. If the value is 1, mean we wish to send version 2 trap. Enumeration: 'version1': 0, 'version2': 1.
                                 trapDestCommunity 1.3.6.1.4.1.6339.100.15.5.1.4 displaystring read-only
A community to which this destination address belongs.
                                 trapDestStatus 1.3.6.1.4.1.6339.100.15.5.1.5 integer read-only
Writing this to active(1) creates an entry. Writing this to destroy(2) destroys an entry. Enumeration: 'active': 1, 'destroy': 2.
                   l3 1.3.6.1.4.1.6339.100.16
                         arpMgt 1.3.6.1.4.1.6339.100.16.1
                             arpCacheDeleteAll 1.3.6.1.4.1.6339.100.16.1.1 integer read-only
when set , triger flush arp-cache, when get ,nosense Enumeration: 'noDelete': 0, 'delete': 1.
                             arpCacheTimeout 1.3.6.1.4.1.6339.100.16.1.2 integer read-only
arp cache timeout time
                             arpSecurityUpdateProtectALL 1.3.6.1.4.1.6339.100.16.1.3 integer read-only
global enable or disable arp security update protect Enumeration: 'enable': 1, 'disable': 0.
                             arpSecurityLearnProtectALL 1.3.6.1.4.1.6339.100.16.1.4 integer read-only
global enable or disable arp security learn protect Enumeration: 'enable': 1, 'disable': 0.
                             arpSecurityConvertALL 1.3.6.1.4.1.6339.100.16.1.5 integer read-only
global convert dynamic arp-cache to static arp item .enable mean convert Enumeration: 'enable': 1, 'disable': 0.
                             arpSecurityTable 1.3.6.1.4.1.6339.100.16.1.6 no-access
arp security table
                                 arpsecurityEntry 1.3.6.1.4.1.6339.100.16.1.6.1 no-access
index is L3 interface index
                                     arpSecurityIfindex 1.3.6.1.4.1.6339.100.16.1.6.1.1 integer no-access
L3 interface index
                                     arpSecurityUpdateProtect 1.3.6.1.4.1.6339.100.16.1.6.1.2 integer read-only
enable or disable arp security update protect on the current port Enumeration: 'enable': 1, 'disable': 0.
                                     arpSecurityLearnProtect 1.3.6.1.4.1.6339.100.16.1.6.1.3 integer read-only
enable or disable arp security learn protect on the current port Enumeration: 'enable': 1, 'disable': 0.
                                     arpSecurityConvert 1.3.6.1.4.1.6339.100.16.1.6.1.4 integer read-only
convert dynamic arp-cache to static arp item on the port.enable mean convert,get OPS is nosense Enumeration: 'enable': 1, 'disable': 0.
                             arpProxyArpTable 1.3.6.1.4.1.6339.100.16.1.7 no-access
configure arp proxy list
                                 arpProxyArpEntry 1.3.6.1.4.1.6339.100.16.1.7.1 no-access
index is L3 interface index
                                     arpProxyArpIfIndex 1.3.6.1.4.1.6339.100.16.1.7.1.1 integer no-access
L3 interface index
                                     arpProxyArpStatus 1.3.6.1.4.1.6339.100.16.1.7.1.2 integer read-only
arp proxy enable Enumeration: 'enable': 1, 'disable': 0.
                             arpStacticTable 1.3.6.1.4.1.6339.100.16.1.8 no-access
static state arp configuration list
                                 arpStaticEntry 1.3.6.1.4.1.6339.100.16.1.8.1 no-access
index is 'arpProxyArpIfIndex.arpStaticIpaddress'.
                                     arpStaticIfindex 1.3.6.1.4.1.6339.100.16.1.8.1.1 integer no-access
L3 interface index
                                     arpStaticIpaddress 1.3.6.1.4.1.6339.100.16.1.8.1.2 ipaddress no-access
ip address
                                     arpStaticMac 1.3.6.1.4.1.6339.100.16.1.8.1.3 macaddress read-only
the Mac address of the arp item
                                     arpStaticPortIndex 1.3.6.1.4.1.6339.100.16.1.8.1.4 integer read-only
the port index of the arp item
                                     arpStaticStatus 1.3.6.1.4.1.6339.100.16.1.8.1.5 integer read-only
valid(1),this is a active arp when get/getnext; when set,mean create the static arp item invalid(2); when set, mean destory the current arp item waitingforset(3); reserved Enumeration: 'waitingforset': 3, 'valid': 1, 'invalid': 2.
                         routeMgt 1.3.6.1.4.1.6339.100.16.2
                             ipStaticRouteExtTable 1.3.6.1.4.1.6339.100.16.2.1 no-access
static route configuration list
                                 ipStaticRouteExtEntry 1.3.6.1.4.1.6339.100.16.2.1.1 no-access
The index of this table is ip.mask
                                     ipStaticRouteExtDest 1.3.6.1.4.1.6339.100.16.2.1.1.1 ipaddress no-access
static route of intention net segment
                                     ipStaticRouteExtMask 1.3.6.1.4.1.6339.100.16.2.1.1.2 ipaddress no-access
mask
                                     ipStaticRouteExtNextHop 1.3.6.1.4.1.6339.100.16.2.1.1.3 ipaddress read-only
next step ip
                                     ipStaticRouteExtMetric 1.3.6.1.4.1.6339.100.16.2.1.1.4 integer read-only
Manage distance/PRI
                                     ipStaticRouteExtStatus 1.3.6.1.4.1.6339.100.16.2.1.1.5 integer read-only
When you get/getnext one entry, the meaning of 'valid' is that the static route which you get is valid (or active); when you want to configure one static route, 'valid/creating' stand for setting one entry, and 'invalid/destory' stands for delete the static route. Enumeration: 'waitingforset': 3, 'valid': 1, 'invalid': 2.
                         ripMgt 1.3.6.1.4.1.6339.100.16.3
                             ripTimers 1.3.6.1.4.1.6339.100.16.3.1
                                 ripUpdateTime 1.3.6.1.4.1.6339.100.16.3.1.1 integer32 read-write
The update time in seconds controls the advertising of regular update messages. The real working model, while using this timer, the time should be offset by a small random time (+/- 0 to 5 seconds each time it is set.
                                 ripTimeoutTime 1.3.6.1.4.1.6339.100.16.3.1.2 integer32 read-write
The timeout timer in seconds governs the validity of a route. It is initialized when a route is established, and any time an update message is received for the route. If the setting time elapses from the last time the timrout was initialized, the route is considered to have expired, and the hop count of the route is set to infinite. It should be at least three times the value of update timer.
                                 ripGarbageCollectionTime 1.3.6.1.4.1.6339.100.16.3.1.3 integer32 read-write
When the information about a route becomes invalid, the system should not immediately purge that route from its table. Instead, it continues to advertise the route with a metric of infinite. At the same time, the garbage-collection timer is set for that route. When the count reaches zero, the route is purged from the the table. This timer allows neighbors to become aware of the invalidity of a route prior to purging.
                             ripRoutingProcessStatus 1.3.6.1.4.1.6339.100.16.3.2 enabledstatusprivate read-write
Enable or Disable RIP routing process on a system.
                             ripRouterVersion 1.3.6.1.4.1.6339.100.16.3.3 integer read-write
To specify a RIP version used globally by the rourter. Enumeration: 'rip2': 2, 'rip1': 1.
                             ripInstabilityPreventingTable 1.3.6.1.4.1.6339.100.16.3.4 no-access
A list of RIP instability preventing status
                                 ripInstabilityPreventingEntry 1.3.6.1.4.1.6339.100.16.3.4.1 no-access
An entry in the table, containing information about RIP instability preventing configuration. The ifIndex index is a VLAN's ifIndex
                                     ripVlanIndex 1.3.6.1.4.1.6339.100.16.3.4.1.1 integer32 read-only
This is defined as a VLAN interface. A routing interface is a VLAN binds a IP subnet.
                                     ripSplitHorizonStatus 1.3.6.1.4.1.6339.100.16.3.4.1.2 integer read-write
Enable or Disable RIP instability preventing status on an interface Enumeration: 'none': 1, 'splitHorizon': 2, 'poisonReverse': 0.
                             ripStatisticsReset 1.3.6.1.4.1.6339.100.16.3.5 integer read-write
Write it to reset(1), the following objects in RFC 1724 should be reset: 1. Global Counters: 'rip2GlobalRouteChanges', 'rip2GlobalQueries'. 2. Interface Status Table, for each 'rip2IfStatAddress': 'rip2IfStatRcvBadPackets', 'rip2IfStatRcvBadRoutes', 'rip2IfStatSendUpdates' 3. Peer Table, for each 'rip2PeerAddress' and 'rip2PeerDomain', 'rip2PeerRcvBadPackets', 'rip2PeerRcvBadRoutes' When read it, this value always is noReset(2). Enumeration: 'reset': 1, 'noReset': 2.
                             ripNetworkInterfaceTable 1.3.6.1.4.1.6339.100.16.3.6 no-access
                                 ripNetworkInterfaceEntry 1.3.6.1.4.1.6339.100.16.3.6.1 no-access
                                     ripNetworkInterfaceAddress 1.3.6.1.4.1.6339.100.16.3.6.1.1 ipaddress read-only
The RIP Network address(the ip address of the interface).
                                     ripNetworkInterfaceStatus 1.3.6.1.4.1.6339.100.16.3.6.1.2 validstatus read-only
Set this variable to create or destroy a RIP network address. ValidStatus: A simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(0) destroys an entry.
                             ripNetworkAddrTable 1.3.6.1.4.1.6339.100.16.3.7 no-access
                                 ripNetworkAddrEntry 1.3.6.1.4.1.6339.100.16.3.7.1 no-access
                                     ripNetworkAddrAddress 1.3.6.1.4.1.6339.100.16.3.7.1.1 ipaddress read-only
The RIP Network address.
                                     ripNetworkAddrPrefixLen 1.3.6.1.4.1.6339.100.16.3.7.1.2 integer read-only
The RIP Network prefix length of address.
                                     ripNetworkAddrStatus 1.3.6.1.4.1.6339.100.16.3.7.1.3 integer read-only
Set this variable to create or destroy a RIP network address. ValidStatus: A simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(0) destroys an entry. Enumeration: 'valid': 1, 'invalid': 0.
                         ospfMgt 1.3.6.1.4.1.6339.100.16.4
                             ospfSystemGroup 1.3.6.1.4.1.6339.100.16.4.1
                                 ospfRouterIdType 1.3.6.1.4.1.6339.100.16.4.1.1 integer read-only
Set router ID automatically or manually. Enumeration: 'auto': 1, 'manual': 2.
                                 ospfRfc1583CompatibleState 1.3.6.1.4.1.6339.100.16.4.1.2 enabledstatusprivate read-write
Enable or disable rfc1583 compatibility.
                                 ospfAutoCost 1.3.6.1.4.1.6339.100.16.4.1.3 integer32 read-write
Set the reference bandwith of auto cost, the unit is Mbps.
                                 ospfAdvertiseDefaultRoute 1.3.6.1.4.1.6339.100.16.4.1.4 integer read-write
If always is set, always advertises the default route regardless of whether the default route exists;If notalways is set ,advertises the default route when the router have the default route. Enumeration: 'always': 1, 'disable': 0, 'notAlways': 2.
                                 ospfDefaultExternalMetric 1.3.6.1.4.1.6339.100.16.4.1.5 ospfbigmetric read-write
Metric used for generating the default route.
                                 ospfSpfHoldTime 1.3.6.1.4.1.6339.100.16.4.1.6 unsigned32 read-write
Sets the hold time between two consecutive SPF calculations.
                                 ospfSpfDelayTime 1.3.6.1.4.1.6339.100.16.4.1.7 unsigned32 read-write
Sets the delay time to calculate SPF Delay time, in seconds, between when OSPF receives a topology change and when it starts an SPF calculation.
                                 ospfAreaNumber 1.3.6.1.4.1.6339.100.16.4.1.8 integer32 read-only
Records the OSPF area numbers.
                                 clearOspfProcess 1.3.6.1.4.1.6339.100.16.4.1.9 integer32 read-write
clear ip ospf process by process ID.
                             ospfNssaTable 1.3.6.1.4.1.6339.100.16.4.2 no-access
A conceptually table for ospfNssaEntry.
                                 ospfNssaEntry 1.3.6.1.4.1.6339.100.16.4.2.1 no-access
A conceptually row for ospfNssaTable.
                                     ospfNssaAreaId 1.3.6.1.4.1.6339.100.16.4.2.1.1 ospfareaid read-only
The 32-bit identifier for the NSSA. On creation, this can be derived from the instance.
                                     ospfNssaStatus 1.3.6.1.4.1.6339.100.16.4.2.1.2 enabledstatusprivate read-only
The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows.
                                     ospfNssaRedistributeStatus 1.3.6.1.4.1.6339.100.16.4.2.1.3 enabledstatusprivate read-only
Enabled or disabled to import routes only into the normal areas, but not into the NSSA area.
                                     ospfNssaOriginateDefaultInfoStatus 1.3.6.1.4.1.6339.100.16.4.2.1.4 enabledstatusprivate read-only
Enable or disable to generate a Type 7 default into the NSSA area.
                             ospfRedistributeTable 1.3.6.1.4.1.6339.100.16.4.3 no-access
The conceptual table of all of ospfRedistributeEntry.
                                 ospfRedistributeEntry 1.3.6.1.4.1.6339.100.16.4.3.1 no-access
The conceptual row for ospfRedistributeTable.
                                     ospfRedistributeProtocol 1.3.6.1.4.1.6339.100.16.4.3.1.1 integer read-only
Protocol ID. Enumeration: 'kernel': 1, 'isis': 9, 'rip': 4, 'bgp': 8, 'static': 3, 'connect': 2, 'ospf': 6.
                                     ospfRedistributeStatus 1.3.6.1.4.1.6339.100.16.4.3.1.2 enabledstatusprivate read-only
enable-- redistribute the specific route,disable--- does not redistribute the specific route.For example when the ospfRedistributeProtocol is equal to rip, 'enable' stands for redistribute the route from rip.
                                     ospfRedistributeMetricType 1.3.6.1.4.1.6339.100.16.4.3.1.3 integer read-only
Metric type. Enumeration: 'type1': 1, 'type2': 2.
                                     ospfRedistributeMetric 1.3.6.1.4.1.6339.100.16.4.3.1.4 ospfbigmetric read-only
Metric value.
                             ospfSummaryAddressTable 1.3.6.1.4.1.6339.100.16.4.4 no-access
The conceptual table of all of ospfSummaryAddressEntry.
                                 ospfSummaryAddressEntry 1.3.6.1.4.1.6339.100.16.4.4.1 no-access
The conceptual row for ospfSummaryAddressTable.
                                     ospfSummaryAddress 1.3.6.1.4.1.6339.100.16.4.4.1.1 ipaddress read-only
Summary address.
                                     ospfSummaryMask 1.3.6.1.4.1.6339.100.16.4.4.1.2 ipaddress read-only
Summary mask.
                                     ospfSummaryStatus 1.3.6.1.4.1.6339.100.16.4.4.1.3 enabledstatusprivate read-only
valid/enable--- define a summary, invalid/disable destory the summary from the router
                             ospfNetworkAreaAddressTable 1.3.6.1.4.1.6339.100.16.4.5 no-access
The conceptual table of all of ospfNetworkAreaAddressEntry.
                                 ospfNetworkAreaAddressEntry 1.3.6.1.4.1.6339.100.16.4.5.1 no-access
The conceptual row for ospfNetworkAreaAddressTable.
                                     ospfNetworkAareaAddress 1.3.6.1.4.1.6339.100.16.4.5.1.1 ipaddress read-only
NetworkArea address.
                                     ospfNetworkAreaMask 1.3.6.1.4.1.6339.100.16.4.5.1.2 ipaddress read-only
NetworkArea mask.
                                     ospfNetworkAreaAreaId 1.3.6.1.4.1.6339.100.16.4.5.1.3 ipaddress read-only
NetworkArea area ID.
                                     ospfNetworkAreaStatus 1.3.6.1.4.1.6339.100.16.4.5.1.4 enabledstatusprivate read-only
enabled(1), disabled(0). valid/enable--- run the ospf on the interfaces,which match the ipaddr/mask; invalid/disable--disable the ospf. ValidStatus: A simple status value for the object to create and destroy a table entry. This is a simplified variant of RowStatus as it supports only two values. Setting it to valid(1) creates an entry. Setting it to invalid(0) destroys an entry.
                         dvmrpMgt 1.3.6.1.4.1.6339.100.16.5
                             dvmrpScalar 1.3.6.1.4.1.6339.100.16.5.1
                                 dvmrpVersionString 1.3.6.1.4.1.6339.100.16.5.1.1 displaystring read-only
The router's DVMRP version information. Similar to sysDescr in MIB-II, this is a free-form field which can be used to display vendor-specific information.
                                 dvmrpNumRoutes 1.3.6.1.4.1.6339.100.16.5.1.3 gauge32 read-only
The number of entries in the routing table. This can be used to monitor the routing table size.
                                 dvmrpReachableRoutes 1.3.6.1.4.1.6339.100.16.5.1.4 gauge32 read-only
The number of entries in the routing table with non infinite metrics. This can be used to detect network partitions by observing the ratio of reachable routes to total routes.
                             dvmrpInterfaceTable 1.3.6.1.4.1.6339.100.16.5.2 no-access
The (conceptual) table listing the router's multicast- capable interfaces.
                                 dvmrpInterfaceEntry 1.3.6.1.4.1.6339.100.16.5.2.1 no-access
An entry (conceptual row) in the dvmrpInterfaceTable. This row augments ipMRouteInterfaceEntry in the IP Multicast MIB, where the threshold object resides.
                                     dvmrpInterfaceIndex 1.3.6.1.4.1.6339.100.16.5.2.1.1 interfaceindex read-only
The ifIndex value of the interface for which DVMRP is enabled.
                                     dvmrpInterfaceLocalAddress 1.3.6.1.4.1.6339.100.16.5.2.1.2 ipaddress read-only
The IP address this system will use as a source address on this interface. On unnumbered interfaces, it must be the same value as dvmrpInterfaceLocalAddress for some interface on the system.
                                     dvmrpInterfaceMetric 1.3.6.1.4.1.6339.100.16.5.2.1.3 integer32 read-only
The distance metric for this interface which is used to calculate distance vectors.
                                     dvmrpInterfaceStatus 1.3.6.1.4.1.6339.100.16.5.2.1.4 rowstatus read-only
The status of this entry. Creating the entry enables DVMRP on the virtual interface; destroying the entry or setting it to notInService disables DVMRP on the virtual interface.
                                     dvmrpInterfaceRcvBadPkts 1.3.6.1.4.1.6339.100.16.5.2.1.5 counter32 read-only
The number of DVMRP messages received on the interface by the DVMRP process which were subsequently discarded as invalid (e.g. invalid packet format, or a route report from an unknown neighbor).
                                     dvmrpInterfaceRcvBadRoutes 1.3.6.1.4.1.6339.100.16.5.2.1.6 counter32 read-only
The number of routes, in valid DVMRP packets, which were ignored because the entry was invalid.
                                     dvmrpInterfaceSentRoutes 1.3.6.1.4.1.6339.100.16.5.2.1.7 counter32 read-only
The number of routes, in DVMRP Report packets, which have been sent on this interface. Together with dvmrpNeighborRcvRoutes at a peer, this object is useful for detecting routes being lost.
                                     dvmrpInterfaceKey 1.3.6.1.4.1.6339.100.16.5.2.1.8 snmpadminstring read-only
The (shared) key for authenticating neighbors on this interface. This object is intended solely for the purpose of setting the interface key, and MUST be accessible only via requests using both authentication and privacy. The agent MAY report an empty string in response to get, get- next, get-bulk requests.
                                     dvmrpInterfaceKeyVersion 1.3.6.1.4.1.6339.100.16.5.2.1.9 integer32 read-only
The highest version number of all known interface keys for this interface used for authenticating neighbors.
                                     dvmrpInterfaceGenerationId 1.3.6.1.4.1.6339.100.16.5.2.1.10 integer32 read-only
The generation identifier for the interface. This is used by neighboring routers to detect whether the DVMRP routing table should be resent.
                             dvmrpNeighborTable 1.3.6.1.4.1.6339.100.16.5.3 no-access
The (conceptual) table listing the router's DVMRP neighbors, as discovered by receiving DVMRP messages.
                                 dvmrpNeighborEntry 1.3.6.1.4.1.6339.100.16.5.3.1 no-access
An entry (conceptual row) in the dvmrpNeighborTable.
                                     dvmrpNeighborIfIndex 1.3.6.1.4.1.6339.100.16.5.3.1.1 interfaceindex read-only
The value of ifIndex for the virtual interface used to reach this DVMRP neighbor.
                                     dvmrpNeighborAddress 1.3.6.1.4.1.6339.100.16.5.3.1.2 ipaddress read-only
The IP address of the DVMRP neighbor for which this entry contains information.
                                     dvmrpNeighborUpTime 1.3.6.1.4.1.6339.100.16.5.3.1.3 timeticks read-only
The time since this DVMRP neighbor (last) became a neighbor of the local router.
                                     dvmrpNeighborExpiryTime 1.3.6.1.4.1.6339.100.16.5.3.1.4 timeticks read-only
The minimum time remaining before this DVMRP neighbor will be aged out.
                                     dvmrpNeighborGenerationId 1.3.6.1.4.1.6339.100.16.5.3.1.5 integer32 read-only
The neighboring router's generation identifier.
                                     dvmrpNeighborMajorVersion 1.3.6.1.4.1.6339.100.16.5.3.1.6 integer32 read-only
The neighboring router's major DVMRP version number.
                                     dvmrpNeighborMinorVersion 1.3.6.1.4.1.6339.100.16.5.3.1.7 integer32 read-only
The neighboring router's minor DVMRP version number.
                                     dvmrpNeighborCapabilities 1.3.6.1.4.1.6339.100.16.5.3.1.8 bits read-only
This object describes the neighboring router's capabilities. The leaf bit indicates that the neighbor has only one interface with neighbors. The prune bit indicates that the neighbor supports pruning. The generationID bit indicates that the neighbor sends its generationID in Probe messages. The mtrace bit indicates that the neighbor can handle mtrace requests. The snmp bit indicates that the neighbor support snmp. The netmask bit indicates that the neighbor support netmask. Bits: 'leaf': 0, 'prune': 1, 'mtrace': 3, 'snmp': 4, 'netmask': 5, 'generationID': 2.
                                     dvmrpNeighborRcvRoutes 1.3.6.1.4.1.6339.100.16.5.3.1.9 counter32 read-only
The total number of routes received in valid DVMRP packets received from this neighbor. This can be used to diagnose problems such as unicast route injection, as well as giving an indication of the level of DVMRP route exchange activity.
                                     dvmrpNeighborRcvBadPkts 1.3.6.1.4.1.6339.100.16.5.3.1.10 counter32 read-only
The number of packet received from this neighbor which were discarded as invalid.
                                     dvmrpNeighborRcvBadRoutes 1.3.6.1.4.1.6339.100.16.5.3.1.11 counter32 read-only
The number of routes, in valid DVMRP packets received from this neighbor, which were ignored because the entry was invalid.
                                     dvmrpNeighborState 1.3.6.1.4.1.6339.100.16.5.3.1.12 integer read-only
State of the neighbor adjacency. Enumeration: 'active': 2, 'down': 4, 'ignoring': 3, 'oneway': 1.
                             dvmrpRouteTable 1.3.6.1.4.1.6339.100.16.5.4 no-access
The table of routes learned through DVMRP route exchange.
                                 dvmrpRouteEntry 1.3.6.1.4.1.6339.100.16.5.4.1 no-access
An entry (conceptual row) containing the multicast routing information used by DVMRP in place of the unicast routing information.
                                     dvmrpRouteSource 1.3.6.1.4.1.6339.100.16.5.4.1.1 ipaddress read-only
The network address which when combined with the corresponding value of dvmrpRouteSourceMask identifies the sources for which this entry contains multicast routing information.
                                     dvmrpRouteSourceMask 1.3.6.1.4.1.6339.100.16.5.4.1.2 ipaddress read-only
The network mask which when combined with the corresponding value of dvmrpRouteSource identifies the sources for which this entry contains multicast routing information.
                                     dvmrpRouteUpstreamNeighbor 1.3.6.1.4.1.6339.100.16.5.4.1.3 ipaddress read-only
The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources are received.
                                     dvmrpRouteIfIndex 1.3.6.1.4.1.6339.100.16.5.4.1.4 interfaceindexorzero read-only
The value of ifIndex for the interface on which IP datagrams sent by these sources are received. A value of 0 typically means the route is an aggregate for which no next- hop interface exists.
                                     dvmrpRouteMetric 1.3.6.1.4.1.6339.100.16.5.4.1.5 integer32 read-only
The distance in hops to the source subnet.
                                     dvmrpRouteExpiryTime 1.3.6.1.4.1.6339.100.16.5.4.1.6 timeticks read-only
The minimum amount of time remaining before this entry will be aged out.
                                     dvmrpRouteUpTime 1.3.6.1.4.1.6339.100.16.5.4.1.7 timeticks read-only
The time since the route represented by this entry was learned by the router.
                             dvmrpRouteNextHopTable 1.3.6.1.4.1.6339.100.16.5.5 no-access
The (conceptual) table containing information on the next hops on outgoing interfaces for routing IP multicast datagrams.
                                 dvmrpRouteNextHopEntry 1.3.6.1.4.1.6339.100.16.5.5.1 no-access
An entry (conceptual row) in the list of next hops on outgoing interfaces to which IP multicast datagrams from particular sources are routed.
                                     dvmrpRouteNextHopSource 1.3.6.1.4.1.6339.100.16.5.5.1.1 ipaddress read-only
The network address which when combined with the corresponding value of dvmrpRouteNextHopSourceMask identifies the sources for which this entry specifies a next hop on an outgoing interface.
                                     dvmrpRouteNextHopSourceMask 1.3.6.1.4.1.6339.100.16.5.5.1.2 ipaddress read-only
The network mask which when combined with the corresponding value of dvmrpRouteNextHopSource identifies the sources for which this entry specifies a next hop on an outgoing interface.
                                     dvmrpRouteNextHopIfIndex 1.3.6.1.4.1.6339.100.16.5.5.1.3 interfaceindex read-only
The ifIndex value of the interface for the outgoing interface for this next hop.
                                     dvmrpRouteNextHopType 1.3.6.1.4.1.6339.100.16.5.5.1.4 integer read-only
Type is leaf if no downstream dependent neighbors exist on the outgoing virtual interface. Otherwise, type is branch. Enumeration: 'leaf': 1, 'branch': 2.
                             dvmrpPruneTable 1.3.6.1.4.1.6339.100.16.5.6 no-access
The (conceptual) table listing the router's upstream prune state.
                                 dvmrpPruneEntry 1.3.6.1.4.1.6339.100.16.5.6.1 no-access
An entry (conceptual row) in the dvmrpPruneTable.
                                     dvmrpPruneGroup 1.3.6.1.4.1.6339.100.16.5.6.1.1 ipaddress read-only
The group address which has been pruned.
                                     dvmrpPruneSource 1.3.6.1.4.1.6339.100.16.5.6.1.2 ipaddress read-only
The address of the source or source network which has been pruned.
                                     dvmrpPruneSourceMask 1.3.6.1.4.1.6339.100.16.5.6.1.3 ipaddress read-only
The address of the source or source network which has been pruned. The mask must either be all 1's, or else dvmrpPruneSource and dvmrpPruneSourceMask must match dvmrpRouteSource and dvmrpRouteSourceMask for some entry in the dvmrpRouteTable.
                                     dvmrpPruneExpiryTime 1.3.6.1.4.1.6339.100.16.5.6.1.4 timeticks read-only
The amount of time remaining before this prune should expire at the upstream neighbor. This value should be the minimum of the default prune lifetime and the remaining prune lifetimes of the local router's downstream neighbors, if any.
                   sntpMgt 1.3.6.1.4.1.6339.100.17
                         sntpPollTime 1.3.6.1.4.1.6339.100.17.1 integer read-write
The interval for SNTP clients to send requests to NTP/SNTP.
                         sntpServerTable 1.3.6.1.4.1.6339.100.17.2 no-access
The ipv4 sntp server configration table.
                             sntpServerEntry 1.3.6.1.4.1.6339.100.17.2.1 no-access
A set of configuration parameters for a ipv4 sntp server.
                                 sntpServerVersion 1.3.6.1.4.1.6339.100.17.2.1.1 integer read-only
The version of ipv4 sntp server.
                                 sntpServerAddress 1.3.6.1.4.1.6339.100.17.2.1.2 ipaddress read-only
The ipv4 address of the sntp server.
                                 sntpServerStatus 1.3.6.1.4.1.6339.100.17.2.1.3 integer read-only
Now state. Enumeration: 'active': 1, 'destroy': 2.
                         sntpServer6Table 1.3.6.1.4.1.6339.100.17.3 no-access
The ipv6 sntp server configration table.
                             sntpServer6Entry 1.3.6.1.4.1.6339.100.17.3.1 no-access
A set of configuration parameters for a ipv6 sntp server.
                                 sntpServer6Version 1.3.6.1.4.1.6339.100.17.3.1.1 integer read-only
The version of ipv6 sntp server.
                                 sntpServer6Address 1.3.6.1.4.1.6339.100.17.3.1.2 ipv6address read-only
The IP address of the ipv6 sntp server.
                                 sntpServer6Status 1.3.6.1.4.1.6339.100.17.3.1.3 integer read-only
Now state. Enumeration: 'active': 1, 'destroy': 2.
                         sntpTimeZone 1.3.6.1.4.1.6339.100.17.4
                             sntpTimeZoneName 1.3.6.1.4.1.6339.100.17.4.1 displaystring read-write
The name of sntp time zone.
                             sntpTimeZoneType 1.3.6.1.4.1.6339.100.17.4.2 integer read-write
The type of sntp time zone. Enumeration: 'add': 1, 'subtract': 0.
                             sntpTimeZoneTime 1.3.6.1.4.1.6339.100.17.4.3 integer read-write
The interval time of sntp time zone.
                             sntpTimeZoneStatus 1.3.6.1.4.1.6339.100.17.4.4 integer read-write
now state of sntp time zone. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                   urpf 1.3.6.1.4.1.6339.100.18
                         urpfEnable 1.3.6.1.4.1.6339.100.18.1 integer read-write
Global Enable or disable the Unicast reverse path forwarding. Enumeration: 'enable': 1, 'disable': 0.
                         urpfPortTable 1.3.6.1.4.1.6339.100.18.2 no-access
The URPF port configration table.
                             urpfPortEntry 1.3.6.1.4.1.6339.100.18.2.1 no-access
The index of this table is port index.
                                 urpfPortIndex 1.3.6.1.4.1.6339.100.18.2.1.1 integer read-only
Port Index.
                                 urpfPortMode 1.3.6.1.4.1.6339.100.18.2.1.2 integer read-only
Configration of the URPF mode on the port. Enumeration: 'strict': 0, 'loose': 1.
                                 urpfPortAllowDefault 1.3.6.1.4.1.6339.100.18.2.1.3 integer read-only
Allow or not allow default route of URPF. Enumeration: 'allowdefaultroute': 1, 'noallowdefaultroute': 0.
                                 urpfPortStatus 1.3.6.1.4.1.6339.100.18.2.1.4 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                   dcscm 1.3.6.1.4.1.6339.100.20
                         dcscmdcEnable 1.3.6.1.4.1.6339.100.20.1 integer read-write
Dcscm destination control multicast is disable or enable Enumeration: 'enable': 1, 'disable': 0.
                         dcscmdcAcl 1.3.6.1.4.1.6339.100.20.2
                             dcscmdcAclNumber 1.3.6.1.4.1.6339.100.20.2.1 integer read-only
Acl number of Dcscm destination control multicast,the range is 6000--7999.
                             dcscmdcAclSourceIp 1.3.6.1.4.1.6339.100.20.2.2 ipaddress read-only
Source ip address of acl entry
                             dcscmdcAclSourceMask 1.3.6.1.4.1.6339.100.20.2.3 ipaddress read-only
Source Mask of acl entry
                             dcscmdcAclDestinationIp 1.3.6.1.4.1.6339.100.20.2.4 ipaddress read-only
Destination ip address of acl entry.the destination ip must be a valid multicast group address.
                             dcscmdcAclDestinationMask 1.3.6.1.4.1.6339.100.20.2.5 ipaddress read-only
Destination Mask of acl entry. the destination mask should meet the request of muticast group address.
                             dcscmdcAclPermitOrDeny 1.3.6.1.4.1.6339.100.20.2.6 integer read-write
acl entry permit or deny ; 0:deny; 1:permit; 2:del this acl entry Enumeration: 'deltheAcl': 2, 'deny': 0, 'permit': 1.
                         dcscmVMacbindingTable 1.3.6.1.4.1.6339.100.20.3 no-access
dcscm destination control multicast, Acl is binded to VMac
                             dcscmVMacbindingEntry 1.3.6.1.4.1.6339.100.20.3.1 no-access
The index of this table is Vlanid,MacAddress
                                 dcscmVMacbindingVlanid 1.3.6.1.4.1.6339.100.20.3.1.1 integer read-only
Dcscm destination control multicast,The vlanid of rule
                                 dcscmVMacbindingMacAddr 1.3.6.1.4.1.6339.100.20.3.1.2 macaddress read-only
Dcscm destination control multicast,The Mac Address of rule
                                 dcscmVMacbindingAclNumber 1.3.6.1.4.1.6339.100.20.3.1.3 integer read-write
Dcscm destination control multicast,The Acl number of rule ; 0 means del the rule binded to vmac
                         dcscmSipbindingTable 1.3.6.1.4.1.6339.100.20.4 no-access
dcscm destination control multicast, Acl is binded to Sip
                             dcscmSipbindingEntry 1.3.6.1.4.1.6339.100.20.4.1 no-access
The index of this table is Sourceip,SourceMask
                                 dcscmSipbindingSipAddress 1.3.6.1.4.1.6339.100.20.4.1.1 ipaddress read-only
Dcscm destination control multicast,The Source ip of rule
                                 dcscmSipbindingSipMask 1.3.6.1.4.1.6339.100.20.4.1.2 integer read-only
Dcscm destination control multicast,The Source ip mask len of rule
                                 dcscmSipbindingAclNumber 1.3.6.1.4.1.6339.100.20.4.1.3 integer read-write
Dcscm destination control multicast,The Acl number of rule;0 means del the rule binded to sip
                         dcscmdcPortbindingTable 1.3.6.1.4.1.6339.100.20.5 no-access
dcscm destination control multicast, Acl is binded to Port
                             dcscmdcPortbindingEntry 1.3.6.1.4.1.6339.100.20.5.1 no-access
The index of this table is PortName
                                 dcscmdcPortbindingPortName 1.3.6.1.4.1.6339.100.20.5.1.1 integer read-only
Dcscm destination control multicast,The Port index of rule
                                 dcscmdcPortbindingAclNumber 1.3.6.1.4.1.6339.100.20.5.1.2 integer read-write
Dcscm destination control multicast,The Acl number of rule;0 means del the rule binded to port
                         dcscmscEnable 1.3.6.1.4.1.6339.100.20.6 integer read-write
dcscm source control multicast is disable or enable Enumeration: 'enable': 1, 'disable': 0.
                         dcscmscAcl 1.3.6.1.4.1.6339.100.20.7
                             dcscmscAclNumber 1.3.6.1.4.1.6339.100.20.7.1 integer read-write
Acl number of Dcscm source control multicast,the range is 5000--5099.
                             dcscmscAclSourceIp 1.3.6.1.4.1.6339.100.20.7.2 ipaddress read-write
Source ip address of acl entry
                             dcscmscAclSourceMask 1.3.6.1.4.1.6339.100.20.7.3 ipaddress read-write
Source Mask of acl entry
                             dcscmscAclDestinationIp 1.3.6.1.4.1.6339.100.20.7.4 ipaddress read-write
Destination ip address of acl entry, the destination ip must be a valid multicast group address.
                             dcscmscAclDestinationMask 1.3.6.1.4.1.6339.100.20.7.5 ipaddress read-write
Destination Mask of acl entry, the destination mask should meet the request of muticast group address.
                             dcscmscAclPermitOrDeny 1.3.6.1.4.1.6339.100.20.7.6 integer read-write
acl entry permit or deny;0:deny; 1:permit; 2:del this acl Enumeration: 'deltheAcl': 2, 'deny': 0, 'permit': 1.
                         dcscmscPortbindingTable 1.3.6.1.4.1.6339.100.20.8 no-access
dcscm destination control multicast, Acl is binded to Port
                             dcscmscPortbindingEntry 1.3.6.1.4.1.6339.100.20.8.1 no-access
The index of this table is PortName
                                 dcscmscPortbindingPortName 1.3.6.1.4.1.6339.100.20.8.1.1 integer read-only
Dcscm source control multicast,The Port Number of rule
                                 dcscmscPortbindingAclNumber 1.3.6.1.4.1.6339.100.20.8.1.2 integer read-write
Dcscm source control multicast,The Acl number of rule ; 0 means to del the rule binded to port
                         dcscmpcTable 1.3.6.1.4.1.6339.100.20.9 no-access
dcscm policy multicast table
                             dcscmpcEntry 1.3.6.1.4.1.6339.100.20.9.1 no-access
The index of this table is dcscmpcSourceIp,dcscmpcSourceMasklen,dcscmpcDestinationIp,dcscmpcDestinationMasklen
                                 dcscmpcSourceIp 1.3.6.1.4.1.6339.100.20.9.1.1 ipaddress read-only
source ip address of policy multicast
                                 dcscmpcSourceMasklen 1.3.6.1.4.1.6339.100.20.9.1.2 integer read-only
Mask length of source Ip
                                 dcscmpcDestinationIp 1.3.6.1.4.1.6339.100.20.9.1.3 ipaddress read-only
Destination ip address of policy multicast,the destination ip must be a valid multicast group address.
                                 dcscmpcDestinationMasklen 1.3.6.1.4.1.6339.100.20.9.1.4 integer read-only
Mask length of destination Ip
                                 dcscmpccos 1.3.6.1.4.1.6339.100.20.9.1.5 integer read-write
cos value of policy multicast; between 0 and 7 ;8 means to del the policy
                   dcscm6 1.3.6.1.4.1.6339.100.21
                         dcscm6dcEnable 1.3.6.1.4.1.6339.100.21.1 integer read-write
dcscm6 destination control multicast is disable or enable Enumeration: 'enable': 1, 'disable': 0.
                         dcscm6dcAcl 1.3.6.1.4.1.6339.100.21.2
                             dcscm6dcAclNumber 1.3.6.1.4.1.6339.100.21.2.1 integer read-write
Acl number of Dcscm6 destination control multicast,the range is 9000--10999.
                             dcscm6dcAclSourceIp 1.3.6.1.4.1.6339.100.21.2.2 ipv6address read-write
Source ip address of acl entry
                             dcscm6dcAclSourceMask 1.3.6.1.4.1.6339.100.21.2.3 integer read-write
Source MaskLen of acl entry
                             dcscm6dcAclDestinationIp 1.3.6.1.4.1.6339.100.21.2.4 ipv6address read-write
Destination ip address of acl entry,the destination ip must be a valid multicast group address.
                             dcscm6dcAclDestinationMask 1.3.6.1.4.1.6339.100.21.2.5 integer read-write
Destination MaskLen of acl entry ,the mask length should meet the request of multicast group address.
                             dcscm6dcAclPermitOrDeny 1.3.6.1.4.1.6339.100.21.2.6 integer read-write
acl entry permit or deny; 0:deny; 1:permit; 2:del this acl Enumeration: 'deltheAcl': 2, 'deny': 0, 'permit': 1.
                         dcscm6VMacbindingTable 1.3.6.1.4.1.6339.100.21.3 no-access
dcscm6 destination control multicast, Acl is binded to VMac
                             dcscm6VMacbindingEntry 1.3.6.1.4.1.6339.100.21.3.1 no-access
The index of this table is Vlanid,MacAddress
                                 dcscm6VMacbindingVlanid 1.3.6.1.4.1.6339.100.21.3.1.1 integer read-only
Dcscm6 destination control multicast,The vlanid of rule
                                 dcscm6VMacbindingMacAddr 1.3.6.1.4.1.6339.100.21.3.1.2 macaddress read-only
Dcscm6 destination control multicast,The Mac Address of rule
                                 dcscm6VMacbindingAclNumber 1.3.6.1.4.1.6339.100.21.3.1.3 integer read-write
Dcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to vmac
                         dcscm6SipbindingTable 1.3.6.1.4.1.6339.100.21.4 no-access
dcscm6 destination control multicast, Acl is binded to Sip
                             dcscm6SipbindingEntry 1.3.6.1.4.1.6339.100.21.4.1 no-access
The index of this table is Sourceip,SourceMaskLen
                                 dcscm6SipbindingSipAddress 1.3.6.1.4.1.6339.100.21.4.1.1 ipv6address read-only
Dcscm6 destination control multicast,The Source ip of rule
                                 dcscm6SipbindingSipMaskLen 1.3.6.1.4.1.6339.100.21.4.1.2 integer read-only
Dcscm6 destination control multicast,The Source ip mask len of rule
                                 dcscm6SipbindingAclNumber 1.3.6.1.4.1.6339.100.21.4.1.3 integer read-write
Dcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to sip
                         dcscm6dcPortbindingTable 1.3.6.1.4.1.6339.100.21.5 no-access
dcscm6 destination control multicast, Acl is binded to Port
                             dcscm6dcPortbindingEntry 1.3.6.1.4.1.6339.100.21.5.1 no-access
The index of this table is PortName
                                 dcscm6dcPortbindingPortName 1.3.6.1.4.1.6339.100.21.5.1.1 integer read-only
Dcscm6 destination control multicast,The Port Number of rule
                                 dcscm6dcPortbindingAclNumber 1.3.6.1.4.1.6339.100.21.5.1.2 integer read-write
Dcscm6 destination control multicast,The Acl number of rule;0 means del the rule binded to port
                         dcscm6scEnable 1.3.6.1.4.1.6339.100.21.6 integer read-write
dcscm6 source control multicast is disable or enable Enumeration: 'enable': 1, 'disable': 0.
                         dcscm6scAcl 1.3.6.1.4.1.6339.100.21.7
                             dcscm6scAclNumber 1.3.6.1.4.1.6339.100.21.7.1 integer read-write
Acl number of Dcscm6 source control multicast.the range is 8000--8099
                             dcscm6scAclSourceIp 1.3.6.1.4.1.6339.100.21.7.2 ipv6address read-write
Source ip address of acl entry
                             dcscm6scAclSourceMask 1.3.6.1.4.1.6339.100.21.7.3 integer read-write
Source MaskLen of acl entry
                             dcscm6scAclDestinationIp 1.3.6.1.4.1.6339.100.21.7.4 ipv6address read-write
Destination ip address of acl entry,the destination ip must be a valid multicast group address.
                             dcscm6scAclDestinationMask 1.3.6.1.4.1.6339.100.21.7.5 integer read-write
Destination MaskLen of acl entry ,the mask length should meet the request of multicast group address.
                             dcscm6scAclPermitOrDeny 1.3.6.1.4.1.6339.100.21.7.6 integer read-write
acl entry permit or deny; 0:deny; 1:permit; 2:del this acl Enumeration: 'deltheAcl': 2, 'deny': 0, 'permit': 1.
                         dcscm6scPortbindingTable 1.3.6.1.4.1.6339.100.21.8 no-access
dcscm6 destination control multicast, Acl is binded to Port
                             dcscm6scPortbindingEntry 1.3.6.1.4.1.6339.100.21.8.1 no-access
The index of this table is PortName
                                 dcscm6scPortbindingPortName 1.3.6.1.4.1.6339.100.21.8.1.1 integer read-only
Dcscm6 source control multicast,The Port Number of rule
                                 dcscm6scPortbindingAclNumber 1.3.6.1.4.1.6339.100.21.8.1.2 integer read-write
Dcscm6 source control multicast,The Acl number of rule,0 means to del the rule binded to port
                         dcscm6pcTable 1.3.6.1.4.1.6339.100.21.9 no-access
dcscm6 policy multicast table
                             dcscm6pcEntry 1.3.6.1.4.1.6339.100.21.9.1 no-access
The index of this table is dcscm6pcSourceIp,dcscm6pcSourceMask,dcscm6pcDestinationIp,dcscm6pcDestinationMask
                                 dcscm6pcSourceIp 1.3.6.1.4.1.6339.100.21.9.1.1 ipv6address read-only
source ip address of policy multicast
                                 dcscm6pcSourceMask 1.3.6.1.4.1.6339.100.21.9.1.2 integer read-only
Source MaskLen of policy multicast
                                 dcscm6pcDestinationIp 1.3.6.1.4.1.6339.100.21.9.1.3 ipv6address read-only
Destination ip address of policy multicast
                                 dcscm6pcDestinationMask 1.3.6.1.4.1.6339.100.21.9.1.4 integer read-only
Destination MaskLen of policy multicast
                                 dcscm6pccos 1.3.6.1.4.1.6339.100.21.9.1.5 integer read-write
cos value of policy multicast; between 0 and 7 ;8 means to del the policy
                   prClusterv2 1.3.6.1.4.1.6339.100.22
                         clusterv2Base 1.3.6.1.4.1.6339.100.22.1
                             clusterv2BaseKey 1.3.6.1.4.1.6339.100.22.1.1 octet string read-write
cluster run switch,set the key word only while the cluster is not running and you should set it with set clusterv2BaseRun.
                             clusterv2BaseVlan 1.3.6.1.4.1.6339.100.22.1.2 integer read-write
cluster run switch,set the Vlan only when the cluster is not running and you should set it with set clusterv2BaseRun. if get result is 0 that the cluser is not running!
                             clusterv2BaseRun 1.3.6.1.4.1.6339.100.22.1.3 integer read-write
cluster run switch,set the key word and vlan id or stop the cluster. Enumeration: 'enable': 1, 'disable': 0.
                             clusterv2BaseRole 1.3.6.1.4.1.6339.100.22.1.4 integer read-only
The role of the device. none means cluster device isn't running. Enumeration: 'memberDevice': 2, 'none': 255, 'commanderDevice': 3, 'candidateDevice': 1.
                             clusterv2BaseVersion 1.3.6.1.4.1.6339.100.22.1.5 octet string read-only
version of cluster.
                             clusterv2BaseMaxNumberOfMembers 1.3.6.1.4.1.6339.100.22.1.6 integer read-only
The maximum number of cluster members allowed in the cluster. The command switch is considered as a cluster member also.
                             clusterv2BaseMaxNumberOfSwitches 1.3.6.1.4.1.6339.100.22.1.7 integer read-only
The maximum number of cluster switches allowed in the cluster. The Candidates include commander,candidate and member.
                         clusterv2Create 1.3.6.1.4.1.6339.100.22.2
                             clusterv2CreateIPPool 1.3.6.1.4.1.6339.100.22.2.1 ipaddress read-write
ip pool.Valid cluster ip-pool format like as 10.x.x.x,default is 10.254.254.1 . if get result is 0 that the cluser is not running! set it only on the device is not commander and should set it with set clusterv2CreateCmdrOperate.
                             clusterv2CreateName 1.3.6.1.4.1.6339.100.22.2.2 octet string read-write
create the clustername while create the cluster commander, set it only on the device is not commander and should set it with set clusterv2CreateCmdrOperate.
                             clusterv2CreateCmdrOperate 1.3.6.1.4.1.6339.100.22.2.3 integer read-write
if set create ,operation is to build cluster according to clusterv2CreateClusterIPPool/clusterv2StatusClusterName. if set destroy , operation is try to clear the IPPool and the ClusterName. set create only on the device is not commander. set destroy only on the device is commander. Enumeration: 'destroy': 0, 'create': 1.
                         clusterv2Status 1.3.6.1.4.1.6339.100.22.3
                             clusterv2StatusClusterName 1.3.6.1.4.1.6339.100.22.3.1 octet string read-write
The name of the cluster.Set only on the device is not commander.The default is NULL.
                             clusterv2StatusKeepalive 1.3.6.1.4.1.6339.100.22.3.2 integer read-write
cluster keepalive interval(3-30 second). if get result is 0 that the cluser is not running!
                             clusterv2StatusLoss_count 1.3.6.1.4.1.6339.100.22.3.3 integer read-write
cluster the max(1-10) loss-count packet during the keeplive interval. if get result is 0 that the cluser is not running!
                         clusterv2Commander 1.3.6.1.4.1.6339.100.22.4
                             clusterv2CommanderAutoAddMem 1.3.6.1.4.1.6339.100.22.4.1 integer read-write
auto add mem switch Enumeration: 'enable': 1, 'disable': 0.
                             clusterv2MemberCounter 1.3.6.1.4.1.6339.100.22.4.2 counter32 read-only
member number on commander,read only on commander or will return 65535.
                             clusterv2MemberTable 1.3.6.1.4.1.6339.100.22.4.3 no-access
This table contains one row per cluster member, including the command switch,read only on commander.
                                 clusterv2MemberEntry 1.3.6.1.4.1.6339.100.22.4.3.1 no-access
An entry containing cluster management information applicable to a particular cluster member.
                                     clusterv2MemberNumber 1.3.6.1.4.1.6339.100.22.4.3.1.1 integer read-only
An arbitrary value which uniquely identifies the cluster member switch number. It ranges from 1 to clusterv2StatusMaxNumberOfMembers,read only on commander.
                                     clusterv2MemberIpAddress 1.3.6.1.4.1.6339.100.22.4.3.1.2 ipaddress read-only
The management ip address of the member device.
                                     clusterv2MemberOperStatus 1.3.6.1.4.1.6339.100.22.4.3.1.3 integer read-only
The status of cluster management connectivity between the command switch and a cluster member. Cluster management connectivity is determined by the exchange of cluster management messages between the command switch and a cluster member. Enumeration: 'memberTobe': 3, 'activeMember': 4, 'inactiveMember': 2, 'notMember': 1.
                                     clusterv2MemberMacAddress 1.3.6.1.4.1.6339.100.22.4.3.1.4 macaddress read-only
The management MAC address of the member device.
                                     clusterv2MemberHostName 1.3.6.1.4.1.6339.100.22.4.3.1.5 octet string read-only
                                     clusterv2MemberDeviceType 1.3.6.1.4.1.6339.100.22.4.3.1.6 octet string read-only
deviceType such as 5526S, 2008A etc
                             clusterv2CandidateCounter 1.3.6.1.4.1.6339.100.22.4.4 counter32 read-only
candidate number on commander,read only on commander or will return 65535.
                             clusterv2CandidateTable 1.3.6.1.4.1.6339.100.22.4.5 no-access
This table contains one row per cluster candidate, A cluster candidate is a device that is currently eligible to be added to the cluster of a command switch. A device is eligible if it satisfies the following conditions: 1. It start the cluster func. 2. It is in a same L2 LAN with commander switch The entries in this table and the entries in clusterMemberTable are mutually exclusive at all times. That is, any device that is a cluster member never shows up in the clusterCandidateTable or is never a candidate at the same time . Also, any candidate that shows up in clusterCandidateTable should not appear in clusterMemberTable.
                                 clusterv2CandidateEntry 1.3.6.1.4.1.6339.100.22.4.5.1 no-access
An entry pertaining to a single candidate device.
                                     clusterv2CandidateId 1.3.6.1.4.1.6339.100.22.4.5.1.1 integer read-only
The candidate id.
                                     clusterv2CandidateMacAddress 1.3.6.1.4.1.6339.100.22.4.5.1.2 macaddress read-only
The MAC address of a device qualified to to be a cluster member of the command switch cluster.
                                     clusterv2CandidateHostName 1.3.6.1.4.1.6339.100.22.4.5.1.3 octet string read-only
                                     clusterv2CandidateDeviceType 1.3.6.1.4.1.6339.100.22.4.5.1.4 octet string read-only
                             clusterv2RebootMem 1.3.6.1.4.1.6339.100.22.4.6 octet string read-write
Operation is to reboot the specified member.you can select more member one time, the value connected with '-' or ';',the string len is 1-30 .set only on commander.
                   dns 1.3.6.1.4.1.6339.100.23
                         dnsEnable 1.3.6.1.4.1.6339.100.23.1 integer read-write
Enable or disable dns dynamic domain resolving. Enumeration: 'enable': 1, 'disable': 0.
                         dnsServerTable 1.3.6.1.4.1.6339.100.23.2 no-access
The dns server list table which consists of a sequence of 'dnsServerEntry' items which describe the configured dns server IP information.
                             dnsServerEntry 1.3.6.1.4.1.6339.100.23.2.1 no-access
An entry in the dnsServerTable containing the dns server IP.
                                 dnsServerInetAddrType 1.3.6.1.4.1.6339.100.23.2.1.1 inetaddresstype no-access
The IP address type of dnsServerEntry. This value applies to dnsServerIpAddr.
                                 dnsServerIpAddr 1.3.6.1.4.1.6339.100.23.2.1.2 inetaddress read-only
The dns server IP address with 'dnsServerInetAddrType' to indicate the IP address type(IPv4 or IPv6).
                                 dnsServerPriority 1.3.6.1.4.1.6339.100.23.2.1.3 integer read-only
Current Priority of the dns server.
                                 dnsServerStatus 1.3.6.1.4.1.6339.100.23.2.1.4 integer read-only
Current state of the dns server. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                         dnsDomainSuffixTable 1.3.6.1.4.1.6339.100.23.3 no-access
The dns domain suffix table which consists of a sequence of 'dnsDomainSuffixEntry' items which describe the configured dns domain suffix information.
                             dnsDomainSuffixEntry 1.3.6.1.4.1.6339.100.23.3.1 no-access
An entry in the dnsDomainSuffixTable containing the dns domain suffix.
                                 dnsDomainSuffix 1.3.6.1.4.1.6339.100.23.3.1.1 displaystring read-only
The dns domain suffix(e.g. commpany.com).
                                 dnsDomainSuffixStatus 1.3.6.1.4.1.6339.100.23.3.1.2 integer read-only
Current state of the dns domain suffix. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                         dnsDynHostTable 1.3.6.1.4.1.6339.100.23.4 no-access
The dns dynamic host table which consists of a sequence of 'dnsDynHostEntry' items which describe the resolved dns dynamic host information.
                             dnsDynHostEntry 1.3.6.1.4.1.6339.100.23.4.1 no-access
An entry in the dnsDynHostTable containing the dns dynamic host information.
                                 dnsDynHostIndex 1.3.6.1.4.1.6339.100.23.4.1.1 integer no-access
Index of position in the cache
                                 dnsDynHostName 1.3.6.1.4.1.6339.100.23.4.1.2 displaystring read-only
The dns dynamic host name(e.g. www.sina.com.cn).
                                 dnsDynHostIpAddr 1.3.6.1.4.1.6339.100.23.4.1.3 inetaddress read-only
The dns dynamic host's IP address with 'dnsDynHostInetAddrType' to indicate the IP address type(IPv4 or IPv6).
                                 dnsDynHostTtl 1.3.6.1.4.1.6339.100.23.4.1.4 integer read-only
The dns dynamic host's living time(seconds).
                   ntpSnmpMIB 1.3.6.1.4.1.6339.100.25
                         ntpSnmpMIBObjects 1.3.6.1.4.1.6339.100.25.1
                             ntpEntInfo 1.3.6.1.4.1.6339.100.25.1.1
                                 ntpEntSoftwareName 1.3.6.1.4.1.6339.100.25.1.1.1 displaystring read-only
The product name of the installed NTP version.
                                 ntpEntSoftwareVersion 1.3.6.1.4.1.6339.100.25.1.1.2 displaystring read-only
The software version of the installed NTP implementation.
                                 ntpEntSoftwareVendor 1.3.6.1.4.1.6339.100.25.1.1.4 displaystring read-only
The vendor/author of the installed NTP version.
                                 ntpEntSystemType 1.3.6.1.4.1.6339.100.25.1.1.5 displaystring read-only
General hardware/os platform information.
                                 ntpEntTimeResolution 1.3.6.1.4.1.6339.100.25.1.1.6 displaystring read-only
A string describing the time resolution of the running NTP implementation.
                                 ntpEntTimePrecision 1.3.6.1.4.1.6339.100.25.1.1.9 integer32 read-only
The entity's precision in integer format.
                             ntpEntStatus 1.3.6.1.4.1.6339.100.25.1.2
                                 ntpEntStatusCurrentMode 1.3.6.1.4.1.6339.100.25.1.2.1 displaystring read-only
The actual mode of NTP as a string
                                 ntpEntStatusCurrentModeVal 1.3.6.1.4.1.6339.100.25.1.2.2 integer read-only
The current mode of the NTP as integer value. Enumeration: 'unknown': 99, 'notSynchronized': 2, 'syncToRemoteServer': 6, 'noneConfigured': 3, 'notRunning': 1, 'syncToLocal': 4, 'syncToRefclock': 5.
                                 ntpEntStatusStratum 1.3.6.1.4.1.6339.100.25.1.2.3 ntpstratum read-only
The NTP entity's own stratum value.
                                 ntpEntStatusActiveRefSourceId 1.3.6.1.4.1.6339.100.25.1.2.4 unsigned32 read-only
The association ID of the current syspeer.
                                 ntpEntStatusActiveRefSourceName 1.3.6.1.4.1.6339.100.25.1.2.5 displaystring read-only
The hostname/descriptive name of the current reference source selected as syspeer.
                                 ntpEntStatusNumberOfRefSources 1.3.6.1.4.1.6339.100.25.1.2.7 unsigned32 read-only
The number of reference sources configured for NTP.
                                 ntpEntStatusDateTime 1.3.6.1.4.1.6339.100.25.1.2.10 ntpdatetime read-only
The current NTP date/time on the device, in 128-bit NTP date format. Ref: draft-ietf-ntp-ntpv4-proto-06, section 6: It includes a 64-bit signed seconds field spanning 584 billion years and a 64-bit fraction field resolving .05 attosecond (i.e. 0.5e-18). For convenience in mapping between formats, the seconds field is divided into a 32-bit era field and a 32-bit timestamp field. If time is not syncronized this field shall be a zero-length string. This object can be used to timestamp events on this node and allow a management station to coorelate different time objects. For example, a management station could query this object and sysUpTime in the same operation to be able to relate sysUpTime to NTP time. This object is not to be used to set the time of the node querying this object. NTP should be used for this--or at least SNTP.
                                 ntpEntStatusInPkts 1.3.6.1.4.1.6339.100.25.1.2.13 counter32 read-only
The total number of NTP messages delivered to the NTP entity from the transport service.
                                 ntpEntStatusOutPkts 1.3.6.1.4.1.6339.100.25.1.2.14 counter32 read-only
The total number of NTP messages delivered to the transport service by this NTP entity.
                                 ntpEntStatusBadVersion 1.3.6.1.4.1.6339.100.25.1.2.15 counter32 read-only
The total number of NTP messages which were delivered to this NTP entity and were for an unsupported NTP version.
                                 ntpEntStatusProtocolError 1.3.6.1.4.1.6339.100.25.1.2.16 counter32 read-only
The total number of NTP messages which were delivered to this NTP entity and this entity was not able to process due to an NTP protocol error.
                         ntpEntConformance 1.3.6.1.4.1.6339.100.25.6
                             ntpEntCompliances 1.3.6.1.4.1.6339.100.25.6.1
                                 ntpEntNTPCompliance 1.3.6.1.4.1.6339.100.25.6.1.1
The compliance statement for SNMP entities which use NTP and implement the NTP MIB
                                 ntpEntSNTPCompliance 1.3.6.1.4.1.6339.100.25.6.1.2
The compliance statement for SNMP entities which use SNTP and implement the NTP MIB
                             ntpEntGroups 1.3.6.1.4.1.6339.100.25.6.2
                                 ntpEntObjectsGroup1 1.3.6.1.4.1.6339.100.25.6.2.1
A collection of objects for the NTP MIB that all NTP or SNTP entities should implement.
                                 ntpEntObjectsGroup2 1.3.6.1.4.1.6339.100.25.6.2.2
A collection of objects for the NTP MIB that are optional for NTP or SNTP entities to implement.
                   priPoeConfig 1.3.6.1.4.1.6339.100.26
                         poeSystemEnable 1.3.6.1.4.1.6339.100.26.1 integer read-write
The power inline global switch. Enable expresses it is turned on, while disable indicates that off. Enumeration: 'enable': 1, 'disable': 0.
                         poeMaxPower 1.3.6.1.4.1.6339.100.26.2 integer read-write
The power inline global available power whitch cannot be exceeded by the total power of all PDs.
                         poePoliceEnable 1.3.6.1.4.1.6339.100.26.3 integer read-write
The power inline power mamagement switch. Enable expresses it is in priority-policy mode, while disable indicates that in first-in-first-get mode. Enumeration: 'enable': 1, 'disable': 0.
                         poeLegacyEnable 1.3.6.1.4.1.6339.100.26.4 integer read-write
The power inline nonstandard PD detect switch. Enable expresses nonstandard PD can be detected, while disable indicates that cannot be detected. Enumeration: 'enable': 1, 'disable': 0.
                         poeDisconnect 1.3.6.1.4.1.6339.100.26.5 integer read-only
The power inline disconnection mode. Enumeration: 'ac': 0, 'dc': 1.
                         poeCurrentPower 1.3.6.1.4.1.6339.100.26.6 integer read-only
The power inline current export power. It is a real time value.
                         poePortMode 1.3.6.1.4.1.6339.100.26.7 integer read-only
The power inline power supply mode. Enumeration: 'signal': 0, 'spare': 1.
                         poeSoftwareVersion 1.3.6.1.4.1.6339.100.26.8 displaystring read-only
The power inline software version.
                         poeHardwareVersion 1.3.6.1.4.1.6339.100.26.9 displaystring read-only
The power inline hardware version.
                         poePortConfigTable 1.3.6.1.4.1.6339.100.26.10 no-access
The power inline port configuration table
                               poePortConfigEntry 1.3.6.1.4.1.6339.100.26.10.1 no-access
The power inline configuration in port.
                                   poePortIndex 1.3.6.1.4.1.6339.100.26.10.1.1 integer no-access
The power inline port index.
                                   poePortStatus 1.3.6.1.4.1.6339.100.26.10.1.2 integer read-write
The power inline port switch. Enable expresses it is turned on, while disable indicates that off.enableAuto(1) turn on the auto-mode,enableStatic(2) turn on the force-mode. Enumeration: 'disable': 0, 'enableStatic': 2, 'enableAuto': 1.
                                   poePortPriority 1.3.6.1.4.1.6339.100.26.10.1.3 integer read-write
The power inline port priority. Enumeration: 'high': 1, 'critical': 0, 'low': 2.
                                   poePortMaxPower 1.3.6.1.4.1.6339.100.26.10.1.4 integer read-write
The power inline port available power whitch cannot be exceeded by the connected PD.
                                   poePortCurrentPower 1.3.6.1.4.1.6339.100.26.10.1.5 integer read-only
The power inline port used power. It is a real time value.
                                   poePortCurrentCurrent 1.3.6.1.4.1.6339.100.26.10.1.6 integer read-only
The power inline port export current. It is a real time value.
                                   poePortCurrentVoltage 1.3.6.1.4.1.6339.100.26.10.1.7 integer read-only
The power inline port export voltage. It is a real time value.
                                   poePortPdStatus 1.3.6.1.4.1.6339.100.26.10.1.8 integer read-only
The power inline detect status. on(1):PD is connected and natural powered, off(2):PD is not connected, faulty(3):error, deny(4):power is low or high, force(5):force power. Enumeration: 'on': 1, 'deny': 4, 'faulty': 3, 'off': 2, 'force': 5.
                                   poePortPdClass 1.3.6.1.4.1.6339.100.26.10.1.9 integer read-only
The connected PD class of power inline
                         poeHighInrushEnable 1.3.6.1.4.1.6339.100.26.11 integer read-write
The power inline high-inrush switch. Enable expresses it is turned on, while disable indicates that off. Enumeration: 'enable': 0, 'disable': 1.
                   priQos2 1.3.6.1.4.1.6339.100.27
                         qos2 1.3.6.1.4.1.6339.100.27.1
                             qos2MapCostoIntp 1.3.6.1.4.1.6339.100.27.1.1
                                 qos2MapCostoIntp1 1.3.6.1.4.1.6339.100.27.1.1.1 integer read-only
COS to IntPrio map,IntPrio1<0>.
                                 qos2MapCostoIntp2 1.3.6.1.4.1.6339.100.27.1.1.2 integer read-only
COS to IntPrio map,IntPrio2<0>.
                                 qos2MapCostoIntp3 1.3.6.1.4.1.6339.100.27.1.1.3 integer read-only
COS to IntPrio map,IntPrio1<0>.
                                 qos2MapCostoIntp4 1.3.6.1.4.1.6339.100.27.1.1.4 integer read-only
COS to IntPrio map,IntPrio1<0>.
                                 qos2MapCostoIntp5 1.3.6.1.4.1.6339.100.27.1.1.5 integer read-only
COS to IntPrio map,IntPrio1<0>.
                                 qos2MapCostoIntp6 1.3.6.1.4.1.6339.100.27.1.1.6 integer read-only
COS to IntPrio map,IntPrio1<0>.
                                 qos2MapCostoIntp7 1.3.6.1.4.1.6339.100.27.1.1.7 integer read-only
COS to IntPrio map,IntPrio1<0>.
                                 qos2MapCostoIntp8 1.3.6.1.4.1.6339.100.27.1.1.8 integer read-only
COS to IntPrio map,IntPrio1<0>.
                                 qos2MapCostoIntpStatus 1.3.6.1.4.1.6339.100.27.1.1.9 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2MapCostoDP 1.3.6.1.4.1.6339.100.27.1.2
                                 qos2MapCostoDP1 1.3.6.1.4.1.6339.100.27.1.2.1 integer read-only
COS to drop precedence map,Drop Precedence1<0>.
                                 qos2MapCostoDP2 1.3.6.1.4.1.6339.100.27.1.2.2 integer read-only
COS to drop precedence map,Drop Precedence2<0>.
                                 qos2MapCostoDP3 1.3.6.1.4.1.6339.100.27.1.2.3 integer read-only
COS to drop precedence map,Drop Precedence3<0>.
                                 qos2MapCostoDP4 1.3.6.1.4.1.6339.100.27.1.2.4 integer read-only
COS to drop precedence map,Drop Precedence4<0>.
                                 qos2MapCostoDP5 1.3.6.1.4.1.6339.100.27.1.2.5 integer read-only
COS to drop precedence map,Drop Precedence5<0>.
                                 qos2MapCostoDP6 1.3.6.1.4.1.6339.100.27.1.2.6 integer read-only
COS to drop precedence map,Drop Precedence6<0>.
                                 qos2MapCostoDP7 1.3.6.1.4.1.6339.100.27.1.2.7 integer read-only
COS to drop precedence map,Drop Precedence7<0>.
                                 qos2MapCostoDP8 1.3.6.1.4.1.6339.100.27.1.2.8 integer read-only
COS to drop precedence map,Drop Precedence8<0>.
                                 qos2MapCostoDPStatus 1.3.6.1.4.1.6339.100.27.1.2.9 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2MapDSCPtoDSCP 1.3.6.1.4.1.6339.100.27.1.3
                                 qos2MapDSCPtoDSCP1 1.3.6.1.4.1.6339.100.27.1.3.1 integer read-only
DSCP to DSCP map, DSCP1<0>.
                                 qos2MapDSCPtoDSCP2 1.3.6.1.4.1.6339.100.27.1.3.2 integer read-only
DSCP to DSCP map, DSCP2<0>.
                                 qos2MapDSCPtoDSCP3 1.3.6.1.4.1.6339.100.27.1.3.3 integer read-only
DSCP to DSCP map, DSCP3<0>.
                                 qos2MapDSCPtoDSCP4 1.3.6.1.4.1.6339.100.27.1.3.4 integer read-only
DSCP to DSCP map, DSCP4<0>.
                                 qos2MapDSCPtoDSCP5 1.3.6.1.4.1.6339.100.27.1.3.5 integer read-only
DSCP to DSCP map, DSCP5<0>.
                                 qos2MapDSCPtoDSCP6 1.3.6.1.4.1.6339.100.27.1.3.6 integer read-only
DSCP to DSCP map, DSCP6<0>.
                                 qos2MapDSCPtoDSCP7 1.3.6.1.4.1.6339.100.27.1.3.7 integer read-only
DSCP to DSCP map, DSCP7<0>.
                                 qos2MapDSCPtoDSCP8 1.3.6.1.4.1.6339.100.27.1.3.8 integer read-only
DSCP to DSCP map, DSCP8<0>.
                                 qos2MapDSCPtoDSCPoutDSCP 1.3.6.1.4.1.6339.100.27.1.3.9 integer read-only
DSCP to DSCP map, outDSCP<0>.
                                 qos2MapDSCPtoDSCPStatus 1.3.6.1.4.1.6339.100.27.1.3.10 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2MapDSCPtoIntp 1.3.6.1.4.1.6339.100.27.1.4
                                 qos2MapDSCPtoIntp1 1.3.6.1.4.1.6339.100.27.1.4.1 integer read-only
DSCP to Intp map, DSCP1<0>.
                                 qos2MapDSCPtoIntp2 1.3.6.1.4.1.6339.100.27.1.4.2 integer read-only
DSCP to Intp map, DSCP2<0>.
                                 qos2MapDSCPtoIntp3 1.3.6.1.4.1.6339.100.27.1.4.3 integer read-only
DSCP to Intp map, DSCP3<0>.
                                 qos2MapDSCPtoIntp4 1.3.6.1.4.1.6339.100.27.1.4.4 integer read-only
DSCP to Intp map, DSCP4<0>.
                                 qos2MapDSCPtoIntp5 1.3.6.1.4.1.6339.100.27.1.4.5 integer read-only
DSCP to Intp map, DSCP5<0>.
                                 qos2MapDSCPtoIntp6 1.3.6.1.4.1.6339.100.27.1.4.6 integer read-only
DSCP to Intp map, DSCP6<0>.
                                 qos2MapDSCPtoIntp7 1.3.6.1.4.1.6339.100.27.1.4.7 integer read-only
DSCP to Intp map, DSCP7<0>.
                                 qos2MapDSCPtoIntp8 1.3.6.1.4.1.6339.100.27.1.4.8 integer read-only
DSCP to Intp map, DSCP8<0>.
                                 qos2MapDSCPtoIntpIntPriovalue 1.3.6.1.4.1.6339.100.27.1.4.9 integer read-only
DSCP to Intp map, IntPrio value<0>.
                                 qos2MapDSCPtoIntpStatus 1.3.6.1.4.1.6339.100.27.1.4.10 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2MapDSCPtoDP 1.3.6.1.4.1.6339.100.27.1.5
                                 qos2MapDSCPtoDP1 1.3.6.1.4.1.6339.100.27.1.5.1 integer read-only
DSCP to DP map, DSCP1<0>.
                                 qos2MapDSCPtoDP2 1.3.6.1.4.1.6339.100.27.1.5.2 integer read-only
DSCP to DP map, DSCP2<0>.
                                 qos2MapDSCPtoDP3 1.3.6.1.4.1.6339.100.27.1.5.3 integer read-only
DSCP to DP map, DSCP3<0>.
                                 qos2MapDSCPtoDP4 1.3.6.1.4.1.6339.100.27.1.5.4 integer read-only
DSCP to DP map, DSCP4<0>.
                                 qos2MapDSCPtoDP5 1.3.6.1.4.1.6339.100.27.1.5.5 integer read-only
DSCP to DP map, DSCP5<0>.
                                 qos2MapDSCPtoDP6 1.3.6.1.4.1.6339.100.27.1.5.6 integer read-only
DSCP to DP map, DSCP6<0>.
                                 qos2MapDSCPtoDP7 1.3.6.1.4.1.6339.100.27.1.5.7 integer read-only
DSCP to DP map, DSCP7<0>.
                                 qos2MapDSCPtoDP8 1.3.6.1.4.1.6339.100.27.1.5.8 integer read-only
DSCP to DP map, DSCP8<0>.
                                 qos2MapDSCPtoDPvalue 1.3.6.1.4.1.6339.100.27.1.5.9 integer read-only
DSCP to DP map, Drop Precedence value<0>.
                                 qos2MapDSCPtoDPStatus 1.3.6.1.4.1.6339.100.27.1.5.10 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2MapExptoIntp 1.3.6.1.4.1.6339.100.27.1.6
                                 qos2MapExptoIntp1 1.3.6.1.4.1.6339.100.27.1.6.1 integer read-only
EXP to Intp map, IntPrio1 value<0>.
                                 qos2MapExptoIntp2 1.3.6.1.4.1.6339.100.27.1.6.2 integer read-only
EXP to Intp map, IntPrio2 value<0>.
                                 qos2MapExptoIntp3 1.3.6.1.4.1.6339.100.27.1.6.3 integer read-only
EXP to Intp map, IntPrio3 value<0>.
                                 qos2MapExptoIntp4 1.3.6.1.4.1.6339.100.27.1.6.4 integer read-only
EXP to Intp map, IntPrio4 value<0>.
                                 qos2MapExptoIntp5 1.3.6.1.4.1.6339.100.27.1.6.5 integer read-only
EXP to Intp map, IntPrio5 value<0>.
                                 qos2MapExptoIntp6 1.3.6.1.4.1.6339.100.27.1.6.6 integer read-only
EXP to Intp map, IntPrio6 value<0>.
                                 qos2MapExptoIntp7 1.3.6.1.4.1.6339.100.27.1.6.7 integer read-only
EXP to Intp map, IntPrio7 value<0>.
                                 qos2MapExptoIntp8 1.3.6.1.4.1.6339.100.27.1.6.8 integer read-only
EXP to Intp map, IntPrio8 value<0>.
                                 qos2MapExptoIntpStatus 1.3.6.1.4.1.6339.100.27.1.6.9 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2MapExptoDP 1.3.6.1.4.1.6339.100.27.1.7
                                 qos2MapExptoDP1 1.3.6.1.4.1.6339.100.27.1.7.1 integer read-only
EXP to DP map, Drop Precedence value<0>.
                                 qos2MapExptoDP2 1.3.6.1.4.1.6339.100.27.1.7.2 integer read-only
EXP to DP map, Drop Precedence value<0>.
                                 qos2MapExptoDP3 1.3.6.1.4.1.6339.100.27.1.7.3 integer read-only
EXP to DP map, Drop Precedence value<0>.
                                 qos2MapExptoDP4 1.3.6.1.4.1.6339.100.27.1.7.4 integer read-only
EXP to DP map, Drop Precedence value<0>.
                                 qos2MapExptoDP5 1.3.6.1.4.1.6339.100.27.1.7.5 integer read-only
EXP to DP map, Drop Precedence value<0>.
                                 qos2MapExptoDP6 1.3.6.1.4.1.6339.100.27.1.7.6 integer read-only
EXP to DP map, Drop Precedence value<0>.
                                 qos2MapExptoDP7 1.3.6.1.4.1.6339.100.27.1.7.7 integer read-only
EXP to DP map, Drop Precedence value<0>.
                                 qos2MapExptoDP8 1.3.6.1.4.1.6339.100.27.1.7.8 integer read-only
EXP to DP map, Drop Precedence value<0>.
                                 qos2MapExptoDPStatus 1.3.6.1.4.1.6339.100.27.1.7.9 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2MapIntptoDSCP 1.3.6.1.4.1.6339.100.27.1.8
                                 qos2MapIntptoDSCP1 1.3.6.1.4.1.6339.100.27.1.8.1 integer read-only
Intp to DSCP map, IntPrio value<0>.
                                 qos2MapIntptoDSCP2 1.3.6.1.4.1.6339.100.27.1.8.2 integer read-only
Intp to DSCP map, IntPrio value<0>.
                                 qos2MapIntptoDSCP3 1.3.6.1.4.1.6339.100.27.1.8.3 integer read-only
Intp to DSCP map, IntPrio value<0>.
                                 qos2MapIntptoDSCP4 1.3.6.1.4.1.6339.100.27.1.8.4 integer read-only
Intp to DSCP map, IntPrio value<0>.
                                 qos2MapIntptoDSCP5 1.3.6.1.4.1.6339.100.27.1.8.5 integer read-only
Intp to DSCP map, IntPrio value<0>.
                                 qos2MapIntptoDSCP6 1.3.6.1.4.1.6339.100.27.1.8.6 integer read-only
Intp to DSCP map, IntPrio value<0>.
                                 qos2MapIntptoDSCP7 1.3.6.1.4.1.6339.100.27.1.8.7 integer read-only
Intp to DSCP map, IntPrio value<0>.
                                 qos2MapIntptoDSCP8 1.3.6.1.4.1.6339.100.27.1.8.8 integer read-only
Intp to DSCP map, IntPrio value<0>.
                                 qos2MapIntptoDSCPStatus 1.3.6.1.4.1.6339.100.27.1.8.9 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2MapIntptoEXP 1.3.6.1.4.1.6339.100.27.1.10
                                   qos2MapIntptoEXP1 1.3.6.1.4.1.6339.100.27.1.10.1 integer read-only
Intp to EXP map, EXP value<0>.
                                   qos2MapIntptoEXP2 1.3.6.1.4.1.6339.100.27.1.10.2 integer read-only
Intp to EXP map, EXP value<0>.
                                   qos2MapIntptoEXP3 1.3.6.1.4.1.6339.100.27.1.10.3 integer read-only
Intp to EXP map, EXP value<0>.
                                   qos2MapIntptoEXP4 1.3.6.1.4.1.6339.100.27.1.10.4 integer read-only
Intp to EXP map, EXP value<0>.
                                   qos2MapIntptoEXP5 1.3.6.1.4.1.6339.100.27.1.10.5 integer read-only
Intp to EXP map, EXP value<0>.
                                   qos2MapIntptoEXP6 1.3.6.1.4.1.6339.100.27.1.10.6 integer read-only
Intp to EXP map, EXP value<0>.
                                   qos2MapIntptoEXP7 1.3.6.1.4.1.6339.100.27.1.10.7 integer read-only
Intp to EXP map, EXP value<0>.
                                   qos2MapIntptoEXP8 1.3.6.1.4.1.6339.100.27.1.10.8 integer read-only
Intp to EXP map, EXP value<0>.
                                   qos2MapIntptoEXPStatus 1.3.6.1.4.1.6339.100.27.1.10.9 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2AggregatePolicy 1.3.6.1.4.1.6339.100.27.1.11
                                   qos2AggPolicyName 1.3.6.1.4.1.6339.100.27.1.11.1 displaystring read-only
Aggregate policy name<1>.
                                   qos2AggPolicyCIRKbps 1.3.6.1.4.1.6339.100.27.1.11.2 integer read-only
CIR(Committed Information Rate) Kbits per second <1>.
                                   qos2AggPolicyCBSKbps 1.3.6.1.4.1.6339.100.27.1.11.3 integer read-only
CBS(Committed Burst Size) Kbits per second <1>.
                                   qos2AggPolicyPBSKbps 1.3.6.1.4.1.6339.100.27.1.11.4 integer read-only
PBS(Peak Burst Size) Kbits per second <1>.
                                   qos2AggPolicyPIRKbps 1.3.6.1.4.1.6339.100.27.1.11.5 integer read-only
PIR(Peak Information Rate) Kbits per second <1>.
                                   qos2AggPolicyConformAction 1.3.6.1.4.1.6339.100.27.1.11.6 integer read-only
conform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed is not exceeded; conform-action set-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is not exceeded; conform-action set-prec-transmit specifies to mark down packet TOS value according to policed-dscp mapping when specified speed is not exceeded. . Enumeration: 'set-prec-transmit': 3, 'set-drop-precedence': 5, 'set-internal-priority': 6, 'drop': 1, 'set-cos-transmit': 4, 'transmit': 0, 'set-dscp-transmit': 2.
                                   qos2AggPolicyConformActionChangeValue 1.3.6.1.4.1.6339.100.27.1.11.7 integer read-only
If conform-action is set-dscp-transmit(2),the value is between 0-63; If conform-action is set-prec-transmit(3),the value is between 0-7; If conform-action is set-cos-transmit(4),the value is between 0-7; If conform-action is set-drop-precedence(5),the value is between 0-2; If conform-action is set-internal-priority(6),the value is between 0-7;
                                   qos2AggPolicyExceedAction 1.3.6.1.4.1.6339.100.27.1.11.8 integer read-only
conform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed is not exceeded; conform-action set-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is not exceeded; conform-action set-prec-transmit specifies to mark down packet TOS value according to policed-dscp mapping when specified speed is not exceeded. . Enumeration: 'set-prec-transmit': 3, 'set-drop-precedence': 5, 'set-internal-priority': 6, 'drop': 1, 'set-cos-transmit': 4, 'transmit': 0, 'set-dscp-transmit': 2.
                                   qos2AggPolicyExceedActionChangeValue 1.3.6.1.4.1.6339.100.27.1.11.9 integer read-only
If conform-action is set-dscp-transmit(2),the value is between 0-63; If conform-action is set-prec-transmit(3),the value is between 0-7; If conform-action is set-cos-transmit(4),the value is between 0-7; If conform-action is set-drop-precedence(5),the value is between 0-2; If conform-action is set-internal-priority(6),the value is between 0-7;
                                   qos2AggPolicyViolateAction 1.3.6.1.4.1.6339.100.27.1.11.10 integer read-only
conform-action transmit means send packets without any change when specified speed is not exceeded; conform-action drop means drop packets when specified speed is not exceeded; conform-action set-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is not exceeded; conform-action set-prec-transmit specifies to mark down packet TOS value according to policed-dscp mapping when specified speed is not exceeded. . Enumeration: 'set-prec-transmit': 3, 'set-drop-precedence': 5, 'set-internal-priority': 6, 'drop': 1, 'set-cos-transmit': 4, 'transmit': 0, 'set-dscp-transmit': 2.
                                   qos2AggPolicyViolateActionChangeValue 1.3.6.1.4.1.6339.100.27.1.11.11 integer read-only
If conform-action is set-dscp-transmit(2),the value is between 0-63; If conform-action is set-prec-transmit(3),the value is between 0-7; If conform-action is set-cos-transmit(4),the value is between 0-7; If conform-action is set-drop-precedence(5),the value is between 0-2; If conform-action is set-internal-priority(6),the value is between 0-7;
                                   qos2AggPolicyStatus 1.3.6.1.4.1.6339.100.27.1.11.12 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2ServicePolicyTable 1.3.6.1.4.1.6339.100.27.1.12 no-access
QoS service policy table.
                                   qos2ServicePolicyEntry 1.3.6.1.4.1.6339.100.27.1.12.1 no-access
QoS service policy table.
                                       qos2PolicyMapName 1.3.6.1.4.1.6339.100.27.1.12.1.1 displaystring read-only
Policy map name<1>.
                                       qos2ServicePolicyVlanList 1.3.6.1.4.1.6339.100.27.1.12.1.2 displaystring read-only
Vlan list.
                                       qos2ServicePolicyStatus 1.3.6.1.4.1.6339.100.27.1.12.1.3 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2PortTable 1.3.6.1.4.1.6339.100.27.1.13
                                   qos2PortIndex 1.3.6.1.4.1.6339.100.27.1.13.1 integer read-only
port Index
                                   qos2PortType 1.3.6.1.4.1.6339.100.27.1.13.2 integer read-only
the relation between qosPortType and CLI: 0 mls qos trust {cos |dscp }; 1 mls qos cos {}; 2 service-policy input WORD; 3 mls qos queue {} bandwidth { }; 4 mls qos queue algorithm {sp |wdrr |wrr }; 5 mls qos queue wdrr weight { }; 6 mls qos queue wrr weight { }. According to the relation,when configurate qos with snmp,first set the qosPortType to the correct value to select CLI, then set next CLI parameter.Fox example,set qos default cos is 5, first set qosPortType=1 ,then set qosPortCos to 5, finally setting qosPortStatus to 1, trigger snmp-cache works. Enumeration: 'cos': 1, 'queueAndBandwidth': 3, 'queueAndWrr': 6, 'queueAndWdrr': 5, 'queueAndAlgorithm': 4, 'policy': 2, 'trust': 0.
                                   qos2PortCos 1.3.6.1.4.1.6339.100.27.1.13.3 integer read-only
port default cos value
                                   qos2PortTrust 1.3.6.1.4.1.6339.100.27.1.13.4 integer read-only
Configure port trust. cos(0),mls qos trust cos; dscp(1),mls qos trust dscp. Enumeration: 'cos': 0, 'dscp': 1.
                                   qos2PortPolicy 1.3.6.1.4.1.6339.100.27.1.13.5 displaystring read-only
The corresponding CLI:service-policy input WORD.
                                   qos2PortQueueBandwidth 1.3.6.1.4.1.6339.100.27.1.13.6 displaystring read-only
The corresponding CLI:mls qos queue {} bandwidth { }.
                                   qos2PortQueueAlgorithm 1.3.6.1.4.1.6339.100.27.1.13.7 integer read-only
The corresponding CLI:mls qos queue algorithm {sp |wdrr |wrr }. Enumeration: 'sp': 0, 'wrr': 2, 'wdrr': 1.
                                   qos2PortQueueWdrr 1.3.6.1.4.1.6339.100.27.1.13.8 displaystring read-only
The corresponding CLI:mls qos queue wdrr weight { }.
                                   qos2PortQueueWrr 1.3.6.1.4.1.6339.100.27.1.13.9 displaystring read-only
The corresponding CLI:mls qos queue wrr weight { }.
                                   qos2PortStatus 1.3.6.1.4.1.6339.100.27.1.13.10 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2ClassMapTable 1.3.6.1.4.1.6339.100.27.1.14
                                   qos2ClassMapName 1.3.6.1.4.1.6339.100.27.1.14.1 displaystring read-only
classmap name
                                   qos2ClassMapType 1.3.6.1.4.1.6339.100.27.1.14.2 integer read-only
0 class-map ,index is classmapname; 1 match access-group ,need qos2ClassMapAccessGroup cooperation; 2 match ip dscp ,need qos2ClassMapDscp cooperation; 3 match ip precedence ,need qos2ClassMapIpPre cooperation; 4 match vlan ,need qos2ClassMapVlan cooperation; 5 match ipv6 dscp ,need qos2ClassMapV6Dscp cooperation; 7 match ipv6 flowlabel,need qos2ClassMapV6Flow cooperation; 8 match ipv6 access-group,need qos2ClassMapV6AccGroup cooperation; 9 match cos,need qos2ClassCos cooperation; 10 match exp ,need qos2ClassMapExp cooperation. Enumeration: 'v6dscp': 5, 'cos': 9, 'ippre': 3, 'v6Flow': 7, 'vlan': 4, 'accessGroup': 1, 'dscp': 2, 'configurClassMap': 0, 'exp': 10, 'v6AccessGroup': 8.
                                   qos2ClassMapAccessGroup 1.3.6.1.4.1.6339.100.27.1.14.3 displaystring read-only
Match specify access-group (name or number). This object be configured only if qosClassMapType in the same row is accessGroup(1).
                                   qos2ClassMapDscp 1.3.6.1.4.1.6339.100.27.1.14.4 displaystring read-only
Match specify Dscp. This object be configured only if qosClassMapType in the same row is dscp(2).
                                   qos2ClassMapV6Dscp 1.3.6.1.4.1.6339.100.27.1.14.5 displaystring read-only
Match specify ipv6 Dscp. This object be configured only if qosClassMapType in the same row is v6dscp(5).
                                   qos2ClassMapIpPre 1.3.6.1.4.1.6339.100.27.1.14.6 displaystring read-only
Match specify Ip Precedence. This object be configured only if qosClassMapType in the same row is ippre(3).
                                   qos2ClassMapV6AccGroup 1.3.6.1.4.1.6339.100.27.1.14.7 displaystring read-only
Match specify Ipv6 Access-Group. This object be configured only if qosClassMapType in the same row is v6AccessGroup(8).
                                   qos2ClassMapV6Flow 1.3.6.1.4.1.6339.100.27.1.14.8 displaystring read-only
Match specify Ipv6 Flowlabel. This object be configured only if qosClassMapType in the same row is v6Flow(6).
                                   qos2ClassMapVlan 1.3.6.1.4.1.6339.100.27.1.14.9 displaystring read-only
Match specify Vlan list . At most 8 vlan id. This object be configured only if qosClassMapType in the same row is vlan(4).
                                   qos2ClassMapCos 1.3.6.1.4.1.6339.100.27.1.14.10 displaystring read-only
Match specify Cos . This object be configured only if qosClassMapType in the same row is cos(9).
                                   qos2ClassMapExp 1.3.6.1.4.1.6339.100.27.1.14.11 displaystring read-only
Match specify MPLS EXP. This object be configured only if qosClassMapType in the same row is Exp(10).
                                   qos2ClassMapStatus 1.3.6.1.4.1.6339.100.27.1.14.12 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2PolicyTable 1.3.6.1.4.1.6339.100.27.1.15
                                   qos2PolicyName 1.3.6.1.4.1.6339.100.27.1.15.1 displaystring read-only
QoS Policy name
                                   qos2PolicyClassMap 1.3.6.1.4.1.6339.100.27.1.15.2 displaystring read-only
Specify the classmap name.After a policy map is created, it can be associated to a class. So, if you want the class map to match the policy map,please setting the qosPolicyType to 1,and then setting the qosPolicyStatus to 1 .
                                   qos2PolicyInsertClassMap 1.3.6.1.4.1.6339.100.27.1.15.3 displaystring read-only
Specify the position of classmap name.
                                   qos2PolicyType 1.3.6.1.4.1.6339.100.27.1.15.4 integer read-only
the relation between qosPolicyType and CLI: 0 policy-map ; 1 class ; 2 policy [pir ] | [{conform-action ACTION | exceed-action ACTION | violate-action ACTION }]; 3 policy aggregate ; 4 accounting. Enumeration: 'accounting': 4, 'aggregatePolicer': 3, 'matchclassmap': 1, 'policymap': 0, 'threeColor': 2.
                                   qos2PolicyCIRKbps 1.3.6.1.4.1.6339.100.27.1.15.5 integer read-only
CIR(Committed Information Rate) Kbits per second <1>.
                                   qos2PolicyCBSKbps 1.3.6.1.4.1.6339.100.27.1.15.6 integer read-only
CBS(Committed Burst Size) Kbits per second <1>.
                                   qos2PolicyPBSKbps 1.3.6.1.4.1.6339.100.27.1.15.7 integer read-only
PBS(Peak Burst Size) Kbits per second <1>.
                                   qos2PolicyPIRKbps 1.3.6.1.4.1.6339.100.27.1.15.8 integer read-only
PIR(Peak Information Rate) Kbits per second <1>.
                                   qos2PolicyConformActionChange 1.3.6.1.4.1.6339.100.27.1.15.9 integer read-only
transmit(0): means send packets without any change; drop(1): means drop packets; set-dscp-transmit(2): send packets and remark dscp value; set-prec-transmit(3): send packets and remark ip-precedence value; set-cos-transmit(4): send packets and remark cos value; set-internal-priority(5):send packets and remark internal-priority value ; set-drop-Precedence(6): send packets and remark drop-precedence value. Enumeration: 'set-prec-transmit': 3, 'set-drop-Precedence': 6, 'set-internal-priority': 5, 'drop': 1, 'set-cos-transmit': 4, 'transmit': 0, 'set-dscp-transmit': 2.
                                   qos2PolicyConformActionChangeValue 1.3.6.1.4.1.6339.100.27.1.15.10 integer read-only
If action is set-dscp-transmit(2),the value is between 0-63; else if action is set-prec-transmit(3),the value is between 0-7; else if action is set-cos-transmit(4),the value is between 0-7; else if action is set-internal-priority(5),the value is between 0-7; else if action is set-drop-Precedence(6),the value is between 0-2.
                                   qos2PolicyExceedActionChange 1.3.6.1.4.1.6339.100.27.1.15.11 integer read-only
transmit(0): means send packets without any change; drop(1): means drop packets; set-dscp-transmit(2): send packets and remark dscp value; set-prec-transmit(3): send packets and remark ip-precedence value; set-cos-transmit(4): send packets and remark cos value; set-internal-priority(5):send packets and remark internal-priority value ; set-drop-Precedence(6): send packets and remark drop-precedence value. Enumeration: 'set-prec-transmit': 3, 'set-drop-Precedence': 6, 'set-internal-priority': 5, 'drop': 1, 'set-cos-transmit': 4, 'transmit': 0, 'set-dscp-transmit': 2.
                                   qos2PolicyExceedActionChangeValue 1.3.6.1.4.1.6339.100.27.1.15.12 integer read-only
If action is set-dscp-transmit(2),the value is between 0-63; else if action is set-prec-transmit(3),the value is between 0-7; else if action is set-cos-transmit(4),the value is between 0-7; else if action is set-internal-priority(5),the value is between 0-7; else if action is set-drop-Precedence(6),the value is between 0-2.
                                   qos2PolicyViolateActionChange 1.3.6.1.4.1.6339.100.27.1.15.13 integer read-only
transmit(0): means send packets without any change; drop(1): means drop packets; set-dscp-transmit(2): send packets and remark dscp value; set-prec-transmit(3): send packets and remark ip-precedence value; set-cos-transmit(4): send packets and remark cos value; set-internal-priority(5):send packets and remark internal-priority value ; set-drop-Precedence(6): send packets and remark drop-precedence value. Enumeration: 'set-prec-transmit': 3, 'set-drop-Precedence': 6, 'set-internal-priority': 5, 'drop': 1, 'set-cos-transmit': 4, 'transmit': 0, 'set-dscp-transmit': 2.
                                   qos2PolicyViolateActionChangeValue 1.3.6.1.4.1.6339.100.27.1.15.14 integer read-only
If action is set-dscp-transmit(2),the value is between 0-63; else if action is set-prec-transmit(3),the value is between 0-7; else if action is set-cos-transmit(4),the value is between 0-7; else if action is set-internal-priority(5),the value is between 0-7; else if action is set-drop-Precedence(6),the value is between 0-2.
                                   qos2PolicyAggregatePolicer 1.3.6.1.4.1.6339.100.27.1.15.15 displaystring read-only
aggregate-policer-name. This object be configured only if qosPolicyType in the same row is aggregatePolicer(3).
                                   qos2PolicyStatus 1.3.6.1.4.1.6339.100.27.1.15.16 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                             qos2SetTable 1.3.6.1.4.1.6339.100.27.1.16
                                   qos2SetPolicyMapName 1.3.6.1.4.1.6339.100.27.1.16.1 displaystring read-only
QoS Policy name.
                                   qos2SetClassMapName 1.3.6.1.4.1.6339.100.27.1.16.2 displaystring read-only
QoS class map name.
                                   qos2SetType 1.3.6.1.4.1.6339.100.27.1.16.3 integer read-only
qos2SetType range:1,2,3,4,5,6 1 dscp Set IP DSCP (DiffServ CodePoints); 2 precedence Set IP precedence; 3 internal-priority Set internal-priority; 4 drop-precedence Set drop-precedence; 5 nexthop Set IP nexthop; 6 v6nextHop Set IPv6 nexthop; 7 cos Set CoS . Enumeration: 'v6nextHop': 6, 'cos': 7, 'drop-precedence': 4, 'precedence': 2, 'nextHop': 5, 'dscp': 1, 'internal-priority': 3.
                                   qos2SetDscp 1.3.6.1.4.1.6339.100.27.1.16.4 integer read-only
remark dscp for the classified flow.
                                   qos2SetPrecedence 1.3.6.1.4.1.6339.100.27.1.16.5 integer read-only
remark ip precedence for classified flow.
                                   qos2SetInternalPriority 1.3.6.1.4.1.6339.100.27.1.16.6 integer read-only
remark internal priority for classified flow.
                                   qos2SetDropPrecedence 1.3.6.1.4.1.6339.100.27.1.16.7 integer read-only
remark drop precedence for classified flow.
                                   qos2SetDefaultPBR 1.3.6.1.4.1.6339.100.27.1.16.8 integer read-only
0:no set default PBR for classified flow; 1:set default PBR for classified flow.
                                   qos2SetVrf 1.3.6.1.4.1.6339.100.27.1.16.9 integer read-only
set vrf value for classified flow.
                                   qos2SetnextHop 1.3.6.1.4.1.6339.100.27.1.16.10 ipaddress read-only
set nexthop for classified flow.
                                   qos2Setv6nextHop 1.3.6.1.4.1.6339.100.27.1.16.11 displaystring read-only
set IPv6 nexthop for classified flow
                                   qos2SetCos 1.3.6.1.4.1.6339.100.27.1.16.12 integer read-only
remark cos for classified flow
                                   qos2SetStatus 1.3.6.1.4.1.6339.100.27.1.16.13 integer read-only
Setting it to active(1) to creates an entry,setting it to destroy(2) to destroy an entry. Enumeration: 'active': 1, 'destroy': 2.
                   dot1xMgt 1.3.6.1.4.1.6339.100.28
                         mabOnlineUserTable 1.3.6.1.4.1.6339.100.28.1 no-access
Show the information of MAB users.
                             mabOnlineUserEntry 1.3.6.1.4.1.6339.100.28.1.1 no-access
                                 mabOnlineUserIndex 1.3.6.1.4.1.6339.100.28.1.1.1 integer no-access
The index of MAB user.
                                 mabOnlineUserMac 1.3.6.1.4.1.6339.100.28.1.1.2 displaystring read-only
The mac of MAB user.
                                 mabOnlineUserName 1.3.6.1.4.1.6339.100.28.1.1.3 displaystring read-only
The username of MAB user.
                                 mabOnlineUserPort 1.3.6.1.4.1.6339.100.28.1.1.4 displaystring read-only
The port for MAB user.
                                 mabOnlineUserState 1.3.6.1.4.1.6339.100.28.1.1.5 displaystring read-only
The state of MAB user.
                         mabSetUserOffline 1.3.6.1.4.1.6339.100.28.2 displaystring read-write
The mac of user offline.
                         dot1xOnlineUserTable 1.3.6.1.4.1.6339.100.28.3 no-access
Show the information of dot1x users.
                             dot1xOnlineUserEntry 1.3.6.1.4.1.6339.100.28.3.1 no-access
                                 dot1xOnlineUserIndex 1.3.6.1.4.1.6339.100.28.3.1.1 integer no-access
The index of dot1x user.
                                 dot1xOnlineUserMac 1.3.6.1.4.1.6339.100.28.3.1.2 displaystring read-only
The mac of dot1x user.
                                 dot1xOnlineUserName 1.3.6.1.4.1.6339.100.28.3.1.3 displaystring read-only
The name of dot1x user.
                                 dot1xOnlineUserPort 1.3.6.1.4.1.6339.100.28.3.1.4 displaystring read-only
The port for dot1x user.
                                 dot1xOnlineUserPortVlanid 1.3.6.1.4.1.6339.100.28.3.1.5 integer read-only
The vlan id of dot1x user.
                                 dot1xOnlineUserPortMethod 1.3.6.1.4.1.6339.100.28.3.1.6 displaystring read-only
The port method dot1x user.
                                 dot1xOnlineUserPortControl 1.3.6.1.4.1.6339.100.28.3.1.7 displaystring read-only
The port control for dot1x user.
                                 dot1xOnlineUserState 1.3.6.1.4.1.6339.100.28.3.1.8 displaystring read-only
The state of dot1x user.
                         dot1xSetUserOffline 1.3.6.1.4.1.6339.100.28.4 displaystring read-write
The mac of user offline.
                   portMacCountLimit 1.3.6.1.4.1.6339.100.29
                         portMacCountLimitTable 1.3.6.1.4.1.6339.100.29.1 no-access
The Port Mac Count Limit information table.
                             portMacCountLimitEntry 1.3.6.1.4.1.6339.100.29.1.1 no-access
The index of this table is port index.
                                 portMacCountLimitPortIndex 1.3.6.1.4.1.6339.100.29.1.1.1 integer read-only
Port Index.
                                 portMacCountLimitConfigNum 1.3.6.1.4.1.6339.100.29.1.1.2 integer read-only
Configration of the maxmum dynamic mac can be learned on the port.
                                 portMacCountLimitCurNum 1.3.6.1.4.1.6339.100.29.1.1.3 integer read-only
The current number of the dynamic mac learned on the port.
                                 portMacCountLimitDisable 1.3.6.1.4.1.6339.100.29.1.1.4 integer read-only
The disable state of mac count limit on the port.the disable state can be set,but enable state is not Enumeration: 'disable': 1, 'not-disable': 0.
                                 portMacCountLimitViolationMode 1.3.6.1.4.1.6339.100.29.1.1.5 integer read-only
The violation mode of port mac count reach the threshold.The default mode is protect,if you want to disable violation mode,you can config protect mode. Enumeration: 'protect': 1, 'shutdown': 2, 'replace': 4.
                                 portMacCountLimitShutRecoveryTime 1.3.6.1.4.1.6339.100.29.1.1.6 integer read-only
The recovery time of violation shutdown mode, the recovery time range is <5>, the value 0 is to cancel recovery time, the value <1> is not allowed to config.
                   ddm 1.3.6.1.4.1.6339.100.30
                         ddmTranscDiagnosisTable 1.3.6.1.4.1.6339.100.30.1 no-access
A list of ddm transceiver diagnosis information.
                             ddmTranscDiagnosisEntry 1.3.6.1.4.1.6339.100.30.1.1 no-access
entry for ddm transceiver diagnosis information.
                                 ddmDiagnosisIfIndex 1.3.6.1.4.1.6339.100.30.1.1.1 integer read-only
interface NO.
                                 ddmDiagnosisTemperature 1.3.6.1.4.1.6339.100.30.1.1.2 displaystring read-only
current Temperature of the port,and the unit is C.
                                 ddmDiagTempHighAlarmThreshold 1.3.6.1.4.1.6339.100.30.1.1.3 displaystring read-only
High alarm threshold of Temperature.
                                 ddmDiagTempLowAlarmThreshold 1.3.6.1.4.1.6339.100.30.1.1.4 displaystring read-only
Low alarm threshold of Temperature.
                                 ddmDiagTempHighWarnThreshold 1.3.6.1.4.1.6339.100.30.1.1.5 displaystring read-only
High warn threshold of Temperature.
                                 ddmDiagTempLowWarnThreshold 1.3.6.1.4.1.6339.100.30.1.1.6 displaystring read-only
Low warn threshold of Temperature.
                                 ddmDiagnosisVoltage 1.3.6.1.4.1.6339.100.30.1.1.7 displaystring read-only
voltage of the port,and the unit is V.
                                 ddmDiagVoltHighAlarmThreshold 1.3.6.1.4.1.6339.100.30.1.1.8 displaystring read-only
High alarm threshold of Voltage.
                                 ddmDiagVoltLowAlarmThreshold 1.3.6.1.4.1.6339.100.30.1.1.9 displaystring read-only
Low alarm threshold of Voltage.
                                 ddmDiagVoltHighWarnThreshold 1.3.6.1.4.1.6339.100.30.1.1.10 displaystring read-only
High warn threshold of Voltage.
                                 ddmDiagVoltLowWarnThreshold 1.3.6.1.4.1.6339.100.30.1.1.11 displaystring read-only
Low warn threshold of Voltage.
                                 ddmDiagnosisBias 1.3.6.1.4.1.6339.100.30.1.1.12 displaystring read-only
bias of the port,the unit is mA.
                                 ddmDiagBiasHighAlarmThreshold 1.3.6.1.4.1.6339.100.30.1.1.13 displaystring read-only
High alarm threshold of Bias.
                                 ddmDiagBiasLowAlarmThreshold 1.3.6.1.4.1.6339.100.30.1.1.14 displaystring read-only
Low alarm threshold of Bias.
                                 ddmDiagBiasHighWarnThreshold 1.3.6.1.4.1.6339.100.30.1.1.15 displaystring read-only
High warn threshold of Bias.
                                 ddmDiagBiasLowWarnThreshold 1.3.6.1.4.1.6339.100.30.1.1.16 displaystring read-only
Low warn threshold of Bias.
                                 ddmDiagnosisRXPower 1.3.6.1.4.1.6339.100.30.1.1.17 displaystring read-only
RXPower of the port,and the unit is dBM,if the value of RXPower is infinitesimal,then set it to '-'.
                                 ddmDiagRXPowerHighAlarmThreshold 1.3.6.1.4.1.6339.100.30.1.1.18 displaystring read-only
High alarm threshold of RXPower.
                                 ddmDiagRXPowerLowAlarmThreshold 1.3.6.1.4.1.6339.100.30.1.1.19 displaystring read-only
Low alarm threshold of RXPower.
                                 ddmDiagRXPowerHighWarnThreshold 1.3.6.1.4.1.6339.100.30.1.1.20 displaystring read-only
High warn threshold of RXPower.
                                 ddmDiagRXPowerLowWarnThreshold 1.3.6.1.4.1.6339.100.30.1.1.21 displaystring read-only
Low warn threshold of RXPower.
                                 ddmDiagnosisTXPower 1.3.6.1.4.1.6339.100.30.1.1.22 displaystring read-only
TXPower of the port,and the unit is dBM,if the value of TXPoweris infinitesimal,then set it to '-'.
                                 ddmDiagTXPowerHighAlarmThreshold 1.3.6.1.4.1.6339.100.30.1.1.23 displaystring read-only
High alarm threshold of TXPower.
                                 ddmDiagTXPowerLowAlarmThreshold 1.3.6.1.4.1.6339.100.30.1.1.24 displaystring read-only
k=Low alarm threshold of TXPower.
                                 ddmDiagTXPowerHighWarnThreshold 1.3.6.1.4.1.6339.100.30.1.1.25 displaystring read-only
High warn threshold of TXPower.
                                 ddmDiagTXPowerLowWarnThreshold 1.3.6.1.4.1.6339.100.30.1.1.26 displaystring read-only
Low warn threshold of TXPower.
                         ddmTranscAlarmTable 1.3.6.1.4.1.6339.100.30.2 no-access
A list of ddm transceiver alarm information.
                             ddmTranscAlarmEntry 1.3.6.1.4.1.6339.100.30.2.1 no-access
entry for ddm transceiver alarm information.
                                 ddmAlarmIfIndex 1.3.6.1.4.1.6339.100.30.2.1.1 integer read-only
interface NO.
                                 ddmAlarmInfo 1.3.6.1.4.1.6339.100.30.2.1.2 displaystring read-only
ddm transceiver alarm information.
                   priPppoeIaMib 1.3.6.1.4.1.6339.100.31
                         priPppoeIaGlobalEnable 1.3.6.1.4.1.6339.100.31.1 integer read-write
Enable or disable the pppoe-ia function in the switch. Enumeration: 'enable': 1, 'disable': 0.
                         priPppoeIaSelfDefinedCircuitID 1.3.6.1.4.1.6339.100.31.2 displaystring read-write
If user does not configure the circuit-id of pppoe-ia explicitly on a port, then the user can self-designed format to generate the circuit-id, the format options include vlan, port, ID, self-designed string, the circuitId may be only one or any combination of them, and is strictly generated according to the sequence of format options, the ID option includes switch ID and remote-mac, but the user just select only one of them, also In the swtich ID, it includes mac and hostname options, the user just select only one of two, the maximum length of self-designed striing is 64. If user input NULL, then delete the last configuration. For example, if select vlan ,ID(swtich-id(mac)), and string 'str' format, the user input the string like as 'vlan id swtich-id mac string str'.
                         priPppoeIaTr101CircuitID 1.3.6.1.4.1.6339.100.31.3 displaystring read-write
If user does not configure the circuit-id of pppoe-ia explicitly on a port, then the user can config Tr-101 format to generate the circuit-id, the format like follow 'identifier-string STRING option (sp|sv|pv|spv) delimiter WORD', the STRING can be any ascii except space, and it max length is 47, the WORD must be one in (#|.|,|;|:|/|space). If user input NULL, then delete the last configuration. For example, if STRING is switch , option is spv and WORD is '/', the user input the string like as 'identifier-string switch option spv delimiter /'.
                         priPppoeIaSelfDefinedRemoteID 1.3.6.1.4.1.6339.100.31.4 displaystring read-write
If user does not configure the remote-id of pppoe-ia explicitly on a port, then the user can self-designed format to generate the remote-id, the format options include mac,hostname and self-designed string, the remoteId may be only one or any combination of them, and is strictly generated according to the sequence of format options, the maximum length of self-designed striing is 64. If user input the NULL, then delete the last configuration. For example, if select hostname,mac,and string 'str' format, the user input the string like as 'hostname mac string str'.
                         priPppoeIaDelimiter 1.3.6.1.4.1.6339.100.31.5 integer read-write
Config pppoe-ia delimiter in circuitId and remoteId. Default: the default delimiter of type TR-101 is space, the default delimiter of type self-defined is '\0' Enumeration: 'pound': 1, 'semicolon': 4, 'space': 7, 'default': 0, 'colon': 5, 'slash': 6, 'comma': 3, 'dot': 2.
                         priPppoeIaCircuitIdFormat 1.3.6.1.4.1.6339.100.31.6 integer read-write
Config pppoe-ia circuitId format. Default: the default format of the circuitId's mac(if included) is hex, other is ascii Enumeration: 'default': 0, 'ascii': 2, 'hex': 1.
                         priPppoeIaRemoteIdFormat 1.3.6.1.4.1.6339.100.31.7 integer read-write
Config pppoe-ia remoteId format. Default: the default format of the remoteId's mac(if included) is hex, other is ascii Enumeration: 'default': 0, 'ascii': 2, 'hex': 1.
                         priPppoeIaPortTable 1.3.6.1.4.1.6339.100.31.8 no-access
Pppoe-ia configuration in port.
                             priPppoeIaEntry 1.3.6.1.4.1.6339.100.31.8.1 no-access
Pppoe-ia configuration in port.
                                 priPppoeIaPortID 1.3.6.1.4.1.6339.100.31.8.1.1 integer no-access
This value is port's ID.
                                 priPppoeIaPortEnable 1.3.6.1.4.1.6339.100.31.8.1.2 integer read-write
Enable or disable the pppoe-ia function of the port in the switch. Default:0. Enumeration: 'enable': 1, 'disable': 0.
                                 priPppoeIaPortCircuitID 1.3.6.1.4.1.6339.100.31.8.1.3 displaystring read-write
Config circuitId for the port. Default:NULL.
                                 priPppoeIaPortRemoteID 1.3.6.1.4.1.6339.100.31.8.1.4 displaystring read-write
Config remoteId for the port. Default:NULL.
                                 priPppoeIaPortTrust 1.3.6.1.4.1.6339.100.31.8.1.5 integer read-write
Enable or disable the pppoe-ia trust function of the port in the switch. Default:0 Enumeration: 'enable': 1, 'disable': 0.
                                 priPppoeIaPortVendorTagStrip 1.3.6.1.4.1.6339.100.31.8.1.6 integer read-write
Enable or disable the pppoe-ia vendorTag strip function of the port in the switch. Default:0 Enumeration: 'enable': 1, 'disable': 0.
                   portSecurity 1.3.6.1.4.1.6339.100.32
                         newPortSecurityTable 1.3.6.1.4.1.6339.100.32.1 no-access
The Port Security information table.
                             newPortSecurityEntry 1.3.6.1.4.1.6339.100.32.1.1 no-access
The index of this table is port index.
                                 portSecurityPortIndex 1.3.6.1.4.1.6339.100.32.1.1.1 integer read-only
Secure Port Index.
                                 portSecurityState 1.3.6.1.4.1.6339.100.32.1.1.2 integer read-only
enable or disable port security on this port. Enumeration: 'enable': 1, 'disable': 0.
                                 portSecuritySticky 1.3.6.1.4.1.6339.100.32.1.1.3 integer read-only
enable or disable port security sticky on this port.If enable it,the port converts all the dynamic secure MAC addresses, including those that were dynamically learned before sticky learning was enabled,to sticky secure MAC addresses and adds all sticky secure MAC addresses to the running configuration Enumeration: 'enable': 1, 'disable': 0.
                                 portSecurityMaxMacNum 1.3.6.1.4.1.6339.100.32.1.1.4 integer read-only
The maximum number of security mac can be set or learned on the secure port.
                                 portSecurityCurMacNum 1.3.6.1.4.1.6339.100.32.1.1.5 integer read-only
The number of the current security mac on the secure port.
                                 portSecurityCfgMacNum 1.3.6.1.4.1.6339.100.32.1.1.6 integer read-only
The number of security mac can be set on the secure port.
                                 portSecurityVioMacNum 1.3.6.1.4.1.6339.100.32.1.1.7 integer read-only
The violation number of mac received on the secure port.
                                 portSecurityAgingTime 1.3.6.1.4.1.6339.100.32.1.1.8 integer read-only
The aging time for secure address entries on the secure port.
                                 portSecurityAgingType 1.3.6.1.4.1.6339.100.32.1.1.9 integer read-only
The aging type for secure address entries on the secure port.If you want to disable inactivity or static aging type,you can config default type. Enumeration: 'inactivity': 2, 'inactivity-static': 6, 'absolute-static': 5, 'default': 0, 'static': 4, 'absolute': 1.
                                 portSecurityVioMode 1.3.6.1.4.1.6339.100.32.1.1.10 integer read-only
The violation mode of secure port mac count reach the threshold.The default mode is shutdown,if you want to disable violation mode,you can config shutdown mode. Enumeration: 'restrict': 2, 'protect': 1, 'shutdown': 3.
                                 portSecurityVioShutRecoveryTime 1.3.6.1.4.1.6339.100.32.1.1.11 integer read-only
The recovery time of violation shutdown mode, the recovery time range is <5>, the value 0 is to cancel recovery time, the value <1> is not allowed to config.
                                 portSecurityVioRestrictRecoveryTime 1.3.6.1.4.1.6339.100.32.1.1.12 integer read-only
The recovery time of violation restrict mode, the recovery time range is <5>, the value 0 is to cancel recovery time, the value <1> is not allowed to config.
                         portSecurityVlanMaxNumTable 1.3.6.1.4.1.6339.100.32.2 no-access
Table of maximum mac number with vlan on security port, and the secure port must be on trunk mode.
                             portSecurityVlanMaxNumEntry 1.3.6.1.4.1.6339.100.32.2.1 no-access
An entry in the port security maximum mac number with vlan table.
                                 portSecurityVlanPortIndex 1.3.6.1.4.1.6339.100.32.2.1.1 integer read-only
Secure Port Index.
                                 portSecurityVlanIndex 1.3.6.1.4.1.6339.100.32.2.1.2 integer read-only
The vlan index on the secure port.
                                 portSecurityVlanMaxMacNum 1.3.6.1.4.1.6339.100.32.2.1.3 integer read-only
The maximum number of security mac can be set or learned in the vlan on the secure port, the maximum range is <1>, the value 0 is to cancel maximum in this vlan, and when you set the maximum number with one vlan the secure port must be on trunk mode.
                                 portSecurityVlanCurMacNum 1.3.6.1.4.1.6339.100.32.2.1.4 integer read-only
The current number of security mac set or learned in the vlan on the secure port.
                         portSecurityMacAddressTable 1.3.6.1.4.1.6339.100.32.3 no-access
Table of mac address on security port.
                             portSecurityMacAddressEntry 1.3.6.1.4.1.6339.100.32.3.1 no-access
An entry in the port security mac address table.
                                 portSecurityMacAddressPortIndex 1.3.6.1.4.1.6339.100.32.3.1.1 integer read-only
Secure Port Index.
                                 portSecurityMacAddressVlanIndex 1.3.6.1.4.1.6339.100.32.3.1.2 integer read-only
The vlan index on the secure port.When set mac address,the vlan index must be zero if the port is on access mode.
                                 portSecurityMacAddress 1.3.6.1.4.1.6339.100.32.3.1.3 octet string read-only
Secure mac address on this secure port
                                 portSecurityMacType 1.3.6.1.4.1.6339.100.32.3.1.4 integer read-only
The type of mac address on the secure port. Enumeration: 'secured': 16, 'secures': 32, 'securec': 64.
                                 portSecurityMacStatus 1.3.6.1.4.1.6339.100.32.3.1.5 integer read-only
Current state of the mac address. Enumeration: 'active': 1, 'destroy': 2, 'createAndGo': 0.
                   macNotificationMib 1.3.6.1.4.1.6339.100.33
                         macNotificationMibObjects 1.3.6.1.4.1.6339.100.33.1
                             macNotificationGlobalObjects 1.3.6.1.4.1.6339.100.33.1.1
                                 macNotificationGlobalFeatureEnabled 1.3.6.1.4.1.6339.100.33.1.1.1 truthvalue read-write
Indicates whether the MAC notification feature is currently running in the device. Setting this object to false(2) disables the MAC notification feature globally thus disabling the feature at each interface. Setting this object to true(1) will start the MAC notification feature running in the device. If the feature is already running, setting to true(1) has no effect. Once the MAC notification is enabled, whether the feature is running at each interface is controlled by the macNotificationIfConfigTable.
                                 macNotificationNotificationInterval 1.3.6.1.4.1.6339.100.33.1.1.2 counter32 read-only
This object specifies the maximum interval of time between macNotificationMacChangedNotifications being generated by the device. If the value of macNotificationNotificationsEnabled is true(1), the device will send out the generated macNotificationMacChangedNotifications and archive the MAC change notification events in the macNotificationHistoryTable. If the value of macNotificationNotificationEnabled is false(2), the device will not send out the generated macNotificationMacChangedNotifications but it will archive these events in the macNotificationHistoryTable. If the value of this object is equal to 0, the device will generate macNotificationMacChangedNotifications and archive the MAC change notification events in the macNotificationHistoryTable as soon as there is MAC address learnt or removed by the device. If the value of this object is greater than 0, the device will wait for a period of time equal to the value of this object before generate the macNotificationMacChangedNotifications and archive the MAC change notification events in the macNotificationHistoryTable.
                                 macNotificationMacAddressesLearnt 1.3.6.1.4.1.6339.100.33.1.1.3 counter32 read-only
Indicates the number of MAC addresses learnt by the device.
                                 macNotificationMacAddressesRemoved 1.3.6.1.4.1.6339.100.33.1.1.4 counter32 read-only
Indicates the number of MAC addresses removed from the forwarding database.
                                 macNotificationNotificationsEnabled 1.3.6.1.4.1.6339.100.33.1.1.5 truthvalue read-write
Indicates whether macNotificationMacChangedNotification notifications will or will not be sent when there are MAC addresses learnt or removed from the device's forwarding database. Disabling notifications does not prevent the MAC address info from being added to the macNotificationHistoryTable.
                                 macNotificationNotificationsSent 1.3.6.1.4.1.6339.100.33.1.1.6 counter32 read-only
Indicates the number of macNotificationMacChangedNotifications sent out by the device.
                                 macNotificationHistTableMaxLength 1.3.6.1.4.1.6339.100.33.1.1.7 counter32 read-only
The upper limit on the number of entries that the macNotificationHistoryTable may contain. A value of 0 will prevent any history from being retained. When this table is full, the oldest entry will be deleted and a new one will be created.
                                 macNotificationHistoryTable 1.3.6.1.4.1.6339.100.33.1.1.8 no-access
This table will archive the MAC change notification events generated by this device. The MAC change notification events are archived here even if macNotificationMacChangesNotifications are not actually sent.
                                     macNotificationHistoryEntry 1.3.6.1.4.1.6339.100.33.1.1.8.1 no-access
A MAC change notification message that was previously generated by this device. Each entry is indexed by a message index.
                                         macNotificationHistIndex 1.3.6.1.4.1.6339.100.33.1.1.8.1.1 counter32 read-only
An index that uniquely identifies a MAC change notification event previously generated by the device. This index starts at 1 and increases by one when a MAC change notification is generated. When it reaches the maximum value, the agent wraps the value back to 1.
                                         macNotificationHistMacChangedMsg 1.3.6.1.4.1.6339.100.33.1.1.8.1.2 octet string read-only
This object contains the information of a MAC change notification event. It consists of several tuples packed together in the format of '...'. Each tuple consist of 11 octets in the format of '' where is of size 1 octet and supports the following values 0 - End of MIB object. 1 - MAC learnt. 2 - MAC removed. is VLAN number of the VLAN which the MAC address is belonged to and has size of 2 octet. is the Layer2 Mac Address and has size of 6 octets. is the value of dot1dBasePort for the interface from which the MAC address is learnt and has size of 2 octets.
                                         macNotificationHistTimestamp 1.3.6.1.4.1.6339.100.33.1.1.8.1.3 timestamp read-only
The value of sysUpTime when the macNotificationMacChangedNotification containing the information denoted by the macNotificationHistMacChangedMsg object in this entry was generated.
                             macNotificationInterfaceObjects 1.3.6.1.4.1.6339.100.33.1.2
                                 macNotificationIfConfigTable 1.3.6.1.4.1.6339.100.33.1.2.1 no-access
This table enables or disables the generation of notification at each interface when MAC address is learnt or removed.
                                     macNotificationIfConfigEntry 1.3.6.1.4.1.6339.100.33.1.2.1.1 no-access
Each entry contains the configuration for enabling the MAC notification at each interface that supports this feature.
                                         macNotificationMacAddrLearntEnable 1.3.6.1.4.1.6339.100.33.1.2.1.1.1 truthvalue read-write
Indicates whether this interface is enabled to send macNotificationMacChangedNotification when it learns a new MAC address. This variable has no effect when the value of macNotificationGlobalFeatureEnabled object is false(2). Setting this object to true(1) enables the sending of macNotificationMacChangedNotification when this interface learns a new MAC address. Setting this object to false(2) disables the sending of macNotificationMacChangedNotification when this interface learns a new MAC address.
                                         macNotificationMacAddrRemovedEnable 1.3.6.1.4.1.6339.100.33.1.2.1.1.2 truthvalue read-write
Indicates whether this interface is enabled to send macNotificationMacChangedNotification when a MAC address which it learnt previously is removed from the forwarding table. This variable has no effect when the value of macNotificationGlobalFeatureEnabled object is false(2). Setting this object to true(1) enables the sending of macNotificationMacChangedNotification when a MAC address which this interface learnt previously is removed from the forwarding table. Setting this object to false(2) disables the sending of macNotificationMacChangedNotification when a MAC address which this interface learnt previously is removed from the forwarding table.
                   prieeePortConfig 1.3.6.1.4.1.6339.100.34
                         prieeePortTable 1.3.6.1.4.1.6339.100.34.1 no-access
A table containing current configuration information for each port.
                             prieeePortEntry 1.3.6.1.4.1.6339.100.34.1.1 no-access
eee configuration in port
                                 eeePortIndex 1.3.6.1.4.1.6339.100.34.1.1.1 integer no-access
The eee configuration port index.
                                 eeePortStatus 1.3.6.1.4.1.6339.100.34.1.1.2 integer read-write
The eee config. Enable expresses it is turned on, while disable indicates that off. Enumeration: 'enable': 1, 'disable': 0.
                   portRateLimit 1.3.6.1.4.1.6339.100.35
                         portRateLimitTable 1.3.6.1.4.1.6339.100.35.1 no-access
The Port Receiving Packets Rate Limit information table.
                             portRateLimitEntry 1.3.6.1.4.1.6339.100.35.1.1 no-access
The index of this table is port index.
                                 portRateLimitPortIndex 1.3.6.1.4.1.6339.100.35.1.1.1 integer read-only
Port Index.
                                 portRateLimitConfigBroadcastNum 1.3.6.1.4.1.6339.100.35.1.1.2 integer read-only
Configration of the max receiving rate of broadcast packets on the port,the value range is <200>. The value 0 means disable the rate limit of broadcast packets. the value <1> is not allowed to config.
                                 portRateLimitCurBroadcastNum 1.3.6.1.4.1.6339.100.35.1.1.3 integer read-only
The current receiving rate of broadcast packets on the port.
                                 portRateLimitConfigMulticastNum 1.3.6.1.4.1.6339.100.35.1.1.4 integer read-only
Configration of the max receiving rate of multicast packets on the port,the value range is <200>. The value 0 means disable the rate limit of multicast packets. the value <1> is not allowed to config.
                                 portRateLimitCurMulticastNum 1.3.6.1.4.1.6339.100.35.1.1.5 integer read-only
The current receiving rate of Multicast packets on the port.
                                 portRateLimitConfigUnicastNum 1.3.6.1.4.1.6339.100.35.1.1.6 integer read-only
Configration of the max receiving rate of unicast packets on the port,the value range is <200>. The value 0 means disable the rate limit of unicast packets. the value <1> is not allowed to config.
                                 portRateLimitCurUnicastNum 1.3.6.1.4.1.6339.100.35.1.1.7 integer read-only
The current receiving rate of unicast packets on the port.
                                 portRateLimitConfigAllNum 1.3.6.1.4.1.6339.100.35.1.1.8 integer read-only
Configration of the max receiving rate of all packets on the port,the value range is <200>. The value 0 means disable the rate limit of all packets. the value <1> is not allowed to config.
                                 portRateLimitCurAllNum 1.3.6.1.4.1.6339.100.35.1.1.9 integer read-only
The current receiving rate of all packets on the port.
                                 portRateLimitPacketsType 1.3.6.1.4.1.6339.100.35.1.1.10 integer read-only
Which type of receiving packets that rate limit is set. 0:none, 1:broadcast, 2:multicast, 3:unicast, 4:all, 5:broadcast+multicast, 6:broadcast+unicast, 7:multicast+unicast. 8:broadcast+all, 9:multicast+all, 10:unicast+all, 11:broadcast+multicast+all, 12:broadcast+unicast+all, 13:multicast+unicast+all, 14:broadcast+multicast+unicast, 15:broadcast+multicast+unicast+all
                                 portRateLimitViolationMode 1.3.6.1.4.1.6339.100.35.1.1.11 integer read-only
The violation mode of port receiving packets rate reach the threshold.The default mode is no violation actions. Enumeration: 'nocontrol': 0, 'block': 2, 'shutdown': 1.
                                 portRateLimitShutRecoveryTime 1.3.6.1.4.1.6339.100.35.1.1.12 integer read-only
The recovery time of violation shutdown mode, the recovery time range is <0>, the value 0 means the port cann't be recovery forever, the default value is 300.
                   macBlackholeConfig 1.3.6.1.4.1.6339.100.36
                         macBlackholeTable 1.3.6.1.4.1.6339.100.36.1 no-access
A table containing current configuration information for each mac in vlan`s status.
                             macBlackholeEntry 1.3.6.1.4.1.6339.100.36.1.1 no-access
Thie entry is control the mac add to blackhole or delete from blackhole.
                                 macAddressInVlanID 1.3.6.1.4.1.6339.100.36.1.1.1 integer no-access
This value is the mac address in vlan.
                                 macAddress 1.3.6.1.4.1.6339.100.36.1.1.2 octet string no-access
This value is mac address.
                                 macType 1.3.6.1.4.1.6339.100.36.1.1.3 integer read-only
Control the mac from both(0)/source(1)/destination(2).Default both(0). Enumeration: 'both': 0, 'destination': 2, 'source': 1.
                                 macStatus 1.3.6.1.4.1.6339.100.36.1.1.4 integer read-only
creat(0) the mac to blackhole,or destroy(2) the mac from blackhole.active(1)the mac in blackhole Enumeration: 'active': 1, 'destroy': 2, 'creat': 0.
                   priCable 1.3.6.1.4.1.6339.100.37
                         cableTable 1.3.6.1.4.1.6339.100.37.1 no-access
A list of port entries.
                             priCableEntry 1.3.6.1.4.1.6339.100.37.1.1 no-access
A port entry containing port information, status, and control.
                                 cableLengthInfo 1.3.6.1.4.1.6339.100.37.1.1.1 displaystring read-only
Cable Length Info.
                   priMrppRing 1.3.6.1.4.1.6339.100.38
                         priMrppRingTable 1.3.6.1.4.1.6339.100.38.1 no-access
The MRPP Ring information table.
                             priMrppRingEntry 1.3.6.1.4.1.6339.100.38.1.1 no-access
The index of this table is RING index.
                                 mrppRingIndex 1.3.6.1.4.1.6339.100.38.1.1.1 integer read-only
mrpp ring Index<1>.
                                 mrppRingNodeMode 1.3.6.1.4.1.6339.100.38.1.1.2 integer read-only
mrpp ring node mode:MASTER:1,TRANSIT:0.
                                 mrppRingNodeState 1.3.6.1.4.1.6339.100.38.1.1.3 integer read-only
mrpp ring node state: IDLE: 0, COMPLETE: 1, FAILED: 2, LINKS_UP: 3, LINKS_DOWN: 4, PRE_FORWARDING: 5.
                                 mrppRingStatus 1.3.6.1.4.1.6339.100.38.1.1.4 integer read-only
mrpp ring status:enable:1,disable:0.
                                 mrppRingPriPortName 1.3.6.1.4.1.6339.100.38.1.1.5 displaystring read-only
ring's traffic primary port name.
                                 mrppRingPriPortBlockState 1.3.6.1.4.1.6339.100.38.1.1.6 integer read-only
ring's traffic primary port block state:BLOCK:1,UNBLOCK:0.
                                 mrppRingSecPortName 1.3.6.1.4.1.6339.100.38.1.1.7 displaystring read-only
ring's traffic secondary port name.
                                 mrppRingSecPortBlockState 1.3.6.1.4.1.6339.100.38.1.1.8 integer read-only
ring's traffic secondary port block state:BLOCK:1,UNBLOCK:0.
           notifications 1.3.6.1.4.1.6339.101
                   antiArpscan 1.3.6.1.4.1.6339.101.100
                           prohibitPortOID 1.3.6.1.4.1.6339.101.100.1
                           recoverPortOID 1.3.6.1.4.1.6339.101.100.2
                           prohibitIPOID 1.3.6.1.4.1.6339.101.100.3
                           prohibitIPExceedSlimitOID 1.3.6.1.4.1.6339.101.100.4
                           prohibitIPExceedHlimitOID 1.3.6.1.4.1.6339.101.100.5
                           recoverIPOID 1.3.6.1.4.1.6339.101.100.6
                           ipAddress 1.3.6.1.4.1.6339.101.100.7
                           arpSpeedLimitOID 1.3.6.1.4.1.6339.101.100.8
                           arpDiscardOID 1.3.6.1.4.1.6339.101.100.9
                           recoverArpSpeedOID 1.3.6.1.4.1.6339.101.100.10
                           recoverArpDiscardOID 1.3.6.1.4.1.6339.101.100.11
                   fan 1.3.6.1.4.1.6339.101.101
                           fanAbnormalOID 1.3.6.1.4.1.6339.101.101.1
                           fanNormalOID 1.3.6.1.4.1.6339.101.101.2
                           fanInsertOID 1.3.6.1.4.1.6339.101.101.3
                           fanPullOutOID 1.3.6.1.4.1.6339.101.101.4
                   power 1.3.6.1.4.1.6339.101.102
                           powerAbnormalOID 1.3.6.1.4.1.6339.101.102.1
                           powerNormalOID 1.3.6.1.4.1.6339.101.102.2
                           powerInsertOID 1.3.6.1.4.1.6339.101.102.3
                           powerPullOutOID 1.3.6.1.4.1.6339.101.102.4
                   slotTemperature 1.3.6.1.4.1.6339.101.103
                           slotTemperatureHigherOID 1.3.6.1.4.1.6339.101.103.1
                           slotTemperatureLowerOID 1.3.6.1.4.1.6339.101.103.2
                   dhcpsnooping 1.3.6.1.4.1.6339.101.104
                           shutdownPort 1.3.6.1.4.1.6339.101.104.1
                           noShutdownPort 1.3.6.1.4.1.6339.101.104.2
                           addBlackhole 1.3.6.1.4.1.6339.101.104.3
                           delBlackhole 1.3.6.1.4.1.6339.101.104.4
                   rateViolation 1.3.6.1.4.1.6339.101.105
                           rateViolationShutdownPort 1.3.6.1.4.1.6339.101.105.1
                           rateViolationNoShutdownPort 1.3.6.1.4.1.6339.101.105.2
                   portGroup 1.3.6.1.4.1.6339.101.106
                           portGroupCreate 1.3.6.1.4.1.6339.101.106.1
                           portGroupUpdate 1.3.6.1.4.1.6339.101.106.2
                           portGroupDelete 1.3.6.1.4.1.6339.101.106.2
                   efmOam 1.3.6.1.4.1.6339.101.109
                           efmOamDiscoverySuccess 1.3.6.1.4.1.6339.101.109.1
                           efmOamDiscoveryTimeout 1.3.6.1.4.1.6339.101.109.2
                           efmOamLocalErrSymbolPeriodEvent 1.3.6.1.4.1.6339.101.109.3
                           efmOamLocalErrFramePeriodEvent 1.3.6.1.4.1.6339.101.109.4
                           efmOamLocalErrFrameEvent 1.3.6.1.4.1.6339.101.109.5
                           efmOamLocalErrFrameSecondsSummaryEvent 1.3.6.1.4.1.6339.101.109.6
                           efmOamLocalLinkFault 1.3.6.1.4.1.6339.101.109.7
                           efmOamLocalCriticalEvent 1.3.6.1.4.1.6339.101.109.8
                           efmOamRemoteErrSymbolPeriodEvent 1.3.6.1.4.1.6339.101.109.9
                           efmOamRemoteErrFramePeriodEvent 1.3.6.1.4.1.6339.101.109.10
                           efmOamRemoteErrFrameEvent 1.3.6.1.4.1.6339.101.109.11
                           efmOamRemoteErrFrameSecondsSummaryEvent 1.3.6.1.4.1.6339.101.109.12
                           efmOamRemoteLinkFault 1.3.6.1.4.1.6339.101.109.13
                           efmOamRemoteCriticalEvent 1.3.6.1.4.1.6339.101.109.14
                           efmOamRemoteDyingGasp 1.3.6.1.4.1.6339.101.109.15
                           efmOamLoopBackSuccess 1.3.6.1.4.1.6339.101.109.16
                           efmOamLoopBackExit 1.3.6.1.4.1.6339.101.109.17
                   transceiverMonitor 1.3.6.1.4.1.6339.101.110
                           transceiverMonitorAlarmEvent 1.3.6.1.4.1.6339.101.110.1
                           transceiverMonitorWarnEvent 1.3.6.1.4.1.6339.101.110.2
                   dyingGasp 1.3.6.1.4.1.6339.101.114
                           dyingGaspEvent 1.3.6.1.4.1.6339.101.114.1
                   copyRunningConfig 1.3.6.1.4.1.6339.101.116
                           copyRunningConfigEvent 1.3.6.1.4.1.6339.101.116.1
                   mstp 1.3.6.1.4.1.6339.101.121
                           mstpTcnTrapOID 1.3.6.1.4.1.6339.101.121.1
                   powerGroup 1.3.6.1.4.1.6339.101.122
                           powerSupplyTrap 1.3.6.1.4.1.6339.101.122.2
                           powerPresentTrap 1.3.6.1.4.1.6339.101.122.4
           conformance 1.3.6.1.4.1.6339.102