DC-OPT-MIB: View SNMP OID List / Download MIB

VENDOR: CODEX


 Home MIB: DC-OPT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 codex 1.3.6.1.4.1.449
         cdxProductSpecific 1.3.6.1.4.1.449.2
             cdx6500 1.3.6.1.4.1.449.2.1
                 cdx6500Statistics 1.3.6.1.4.1.449.2.1.3
                     cdx6500StatOtherStatsGroup 1.3.6.1.4.1.449.2.1.3.2
                         cdx6500DCStatTable 1.3.6.1.4.1.449.2.1.3.2.10
                               cdx6500DCGenStatTable 1.3.6.1.4.1.449.2.1.3.2.10.1
                                   cdx6500DCGenStatTableEntry 1.3.6.1.4.1.449.2.1.3.2.10.1.1
                                       cdx6500DCGenStatDSPStatus 1.3.6.1.4.1.449.2.1.3.2.10.1.1.1 integer read-only
This parameter specifies the current status/existence of the DC SIMM/DSP on the motherboard. up - DC SIMM/DSP is installed and operational. down - DC SIMM/DSP is non-functional. missing - DC SIMM/DSP is missing. Enumeration: 'down': 1, 'up': 2, 'missing': 3.
                                       cdx6500DCGenStatHndlrSWRev 1.3.6.1.4.1.449.2.1.3.2.10.1.1.2 integer read-only
This parameter displays the DC Handler Software Revision Number.
                                       cdx6500DCGenStatFnctnSWRev 1.3.6.1.4.1.449.2.1.3.2.10.1.1.3 integer read-only
DC Function Revision number. For example, revision number of DSP firmware.
                                       cdx6500DCGenStatMaxChannels 1.3.6.1.4.1.449.2.1.3.2.10.1.1.4 integer read-only
Number of DC Channels supported.
                                       cdx6500DCGenStatChanInUse 1.3.6.1.4.1.449.2.1.3.2.10.1.1.5 integer read-only
Number of DC Channels in use.
                                       cdx6500DCGenStatMaxSmltChanUse 1.3.6.1.4.1.449.2.1.3.2.10.1.1.6 integer read-only
Maximum number of DC Channels in use simultaneously since the last stats reset.
                                       cdx6500DCGenStatRejectConn 1.3.6.1.4.1.449.2.1.3.2.10.1.1.7 integer read-only
Number of call requests rejected due to the unavailability of DC channels.
                                       cdx6500DCGenStatAggCRatio 1.3.6.1.4.1.449.2.1.3.2.10.1.1.8 displaystring read-only
Ratio of total number of incoming charactersfor all DC channels to total number of outgoing characters for all channels, for the past minute.
                                       cdx6500DCGenStatCurrEncQDepth 1.3.6.1.4.1.449.2.1.3.2.10.1.1.9 integer read-only
Current number of frames in the encoder queue, waiting to be compressed.
                                       cdx6500DCGenStatMaxEncQDepth 1.3.6.1.4.1.449.2.1.3.2.10.1.1.10 integer read-only
Maximum number of frames that were on the encoder queue since the last stats reset.
                                       cdx6500DCGenStatTmOfMaxEncQDepth 1.3.6.1.4.1.449.2.1.3.2.10.1.1.11 displaystring read-only
Time when the maximum Encoder Queue Depth is reached.
                                       cdx6500DCGenStatCurrDecQDepth 1.3.6.1.4.1.449.2.1.3.2.10.1.1.12 integer read-only
Current number of frames in the decoder queue, waiting to be decompressed.
                                       cdx6500DCGenStatMaxDecQDepth 1.3.6.1.4.1.449.2.1.3.2.10.1.1.13 integer read-only
Maximum number of frames that were on the decoder queue waiting to be decompressed.
                                       cdx6500DCGenStatTmOfMaxDecQDepth 1.3.6.1.4.1.449.2.1.3.2.10.1.1.14 displaystring read-only
Time when the maximum Decoder Queue Depth is reached.
                               cdx6500DCChanStatTable 1.3.6.1.4.1.449.2.1.3.2.10.2 no-access
The Data Compression Channel Statistics Table.
                                   cdx6500DCChanStatTableEntry 1.3.6.1.4.1.449.2.1.3.2.10.2.1 no-access
Each entry in this table pertains to the Data Compression Channel statistics.
                                       cdx6500DCChanStatChanNum 1.3.6.1.4.1.449.2.1.3.2.10.2.1.1 integer read-only
Channel number whose statistics were requested.
                                       cdx6500DCChanStatTmOfLastStatRst 1.3.6.1.4.1.449.2.1.3.2.10.2.1.2 displaystring read-only
Time when the node restarted or the stats reset by CTP/SNMP Manager command.
                                       cdx6500DCChanStatChanState 1.3.6.1.4.1.449.2.1.3.2.10.2.1.3 integer read-only
Activity state of the DC channel. dspDown - DSP is down. idle - DSP is ready to be assigned to a connection. negotiating - Source has accepted the Call Request and is waiting for a Call Accept from the destination node. dataPassing - Normal data passing state. apClearing - Call Clear request arrived from access side. npClearing - Call Clear request arrived from network side. clearingCall - A call collision or a Call Clear along with a X.25 reset or a `start buffer discarding'. flushingOnClr - Call has been cleared with FLUSH, waiting packets to flush from DC Handler rings. flushingData - Waiting for x25 confirm. flushingDCRing - Waiting for the data on the DC Handler ring to be flushed after a x.25 confirm or stop discard. clearing - Call has been cleared. Enumeration: 'flushingData': 5, 'dspDown': 1, 'npClearing': 8, 'flushingOnClr': 10, 'apClearing': 7, 'clearingCall': 9, 'dataPassing': 4, 'flushingDCRing': 6, 'idle': 2, 'negotiating': 3, 'clearing': 11.
                                       cdx6500DCChanStatSourceChan 1.3.6.1.4.1.449.2.1.3.2.10.2.1.4 displaystring read-only
Access Protocol's identity string.
                                       cdx6500DCChanStatDestChan 1.3.6.1.4.1.449.2.1.3.2.10.2.1.5 displaystring read-only
Network Protocol's identity string.
                                       cdx6500DCChanStatXmitCRatio 1.3.6.1.4.1.449.2.1.3.2.10.2.1.6 displaystring read-only
Actual compression ratio for outgoing data. This is a 60 second snapshot. Range is 1 - 9.2
                                       cdx6500DCChanStatNumOfEncFrames 1.3.6.1.4.1.449.2.1.3.2.10.2.1.7 counter read-only
Number of frames received from the Access Protocol to be compressed.
                                       cdx6500DCChanStatNumOfCharInToEnc 1.3.6.1.4.1.449.2.1.3.2.10.2.1.8 counter read-only
Number of bytes pushed into the encoder to be compressed.
                                       cdx6500DCChanStatNumOfCharOutOfEnc 1.3.6.1.4.1.449.2.1.3.2.10.2.1.9 counter read-only
Number of compressed bytes produced by the encoder.
                                       cdx6500DCChanStatNumOfDecFrames 1.3.6.1.4.1.449.2.1.3.2.10.2.1.10 counter read-only
Number of frames received from the Network Protocol to be decompressed.
                                       cdx6500DCChanStatNumOfCharInToDec 1.3.6.1.4.1.449.2.1.3.2.10.2.1.11 counter read-only
Number of bytes pushed into the decoder to be decompressed.
                                       cdx6500DCChanStatNumOfCharOutOfDec 1.3.6.1.4.1.449.2.1.3.2.10.2.1.12 counter read-only
Number of decompressed bytes produced by the decoder.
                                       cdx6500DCChanStatEncAETrnstnCnt 1.3.6.1.4.1.449.2.1.3.2.10.2.1.13 counter read-only
Number of times the encoder switched from compressed mode to anti-expansion mode.
                                       cdx6500DCChanStatEncAEFrameCnt 1.3.6.1.4.1.449.2.1.3.2.10.2.1.14 counter read-only
Number of anti-expansion frames sent by the encoder.
                                       cdx6500DCChanStatEncAEModeStatus 1.3.6.1.4.1.449.2.1.3.2.10.2.1.15 integer read-only
Anti Expansion mode Status for Encoder : on - Data Compression is in the anti expansion mode. off - Data Compression is out of the anti expansion mode. Enumeration: 'on': 2, 'off': 1.
                                       cdx6500DCChanStatDecAETrnstnCnt 1.3.6.1.4.1.449.2.1.3.2.10.2.1.16 counter read-only
Number of times the decoder switched from compressed mode to anti-expansion mode.
                                       cdx6500DCChanStatDecAEFrameCnt 1.3.6.1.4.1.449.2.1.3.2.10.2.1.17 counter read-only
Number of anti-expansion frames received by the decoder.
                                       cdx6500DCChanStatDecAEModeStatus 1.3.6.1.4.1.449.2.1.3.2.10.2.1.18 integer read-only
Anti Expansion mode Status for Decoder : on - Data Compression is in the anti expansion mode. off - Data Compression is out of the anti expansion mode. Enumeration: 'on': 2, 'off': 1.
                                       cdx6500DCChanStatDSWithBadFrames 1.3.6.1.4.1.449.2.1.3.2.10.2.1.19 counter read-only
Number of decoded frames detected by the decoder to have been corrupted. This includes frames with bad headers.
                                       cdx6500DCChanStatDSWithBadHeaders 1.3.6.1.4.1.449.2.1.3.2.10.2.1.20 counter read-only
Number of decoded frames detected by the decoder to have a bad header.
                                       cdx6500DCChanStatDSDueToRstOrCng 1.3.6.1.4.1.449.2.1.3.2.10.2.1.21 counter read-only
Number of packets discarded while processing a X.25 reset or during node congestion.
                 cdx6500Controls 1.3.6.1.4.1.449.2.1.4
                     cdx6500ContDC 1.3.6.1.4.1.449.2.1.4.9
                         cdx6500ContResetAllDCStats 1.3.6.1.4.1.449.2.1.4.9.1 integer read-write
Reset the DC Statistics for all channels. Enumeration: 'reset': 1, 'noreset': 2.
                         cdx6500ContDCTable 1.3.6.1.4.1.449.2.1.4.9.2 no-access
These resets require the channel number as the index.
                             cdx6500ContDCTableEntry 1.3.6.1.4.1.449.2.1.4.9.2.1 no-access
Each entry represents a control parameter used to reset Channel Statistics or Channel Vocabulary.
                                 cdx6500ContDCChanNum 1.3.6.1.4.1.449.2.1.4.9.2.1.1 integer read-only
Channel number used as the index.
                                 cdx6500ContResetDCChanStats 1.3.6.1.4.1.449.2.1.4.9.2.1.2 integer read-write
Reset the DC Statistics for this channel. Enumeration: 'reset': 1, 'noreset': 2.
                                 cdx6500ContResetDCChanVocab 1.3.6.1.4.1.449.2.1.4.9.2.1.3 integer read-write
Reset the vocabulary/history buffer for this channel if this channel number is active. Enumeration: 'reset': 1, 'noreset': 2.