DATALINK-MIB: View SNMP OID List / Download MIB

VENDOR: ASENTRIA CORPORATION


 Home MIB: DATALINK-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 asentria 1.3.6.1.4.1.3052
           datalink 1.3.6.1.4.1.3052.1
               productIds 1.3.6.1.4.1.3052.1.1
                   datalinkThisProduct 1.3.6.1.4.1.3052.1.1.1 displaystring read-only
This is a factory-configured string for the product name
               productConfig 1.3.6.1.4.1.3052.1.2
                   productname 1.3.6.1.4.1.3052.1.2.1 displaystring read-only
A second string which may also contain name/version info
                   systemversion 1.3.6.1.4.1.3052.1.2.2 integer read-only
system rom version number
                   appversion 1.3.6.1.4.1.3052.1.2.3 displaystring read-only
application version
                   hardware 1.3.6.1.4.1.3052.1.2.4
                       numberports 1.3.6.1.4.1.3052.1.2.4.1 integer read-only
number of RS232 ports found
                       netcard 1.3.6.1.4.1.3052.1.2.4.2 integer read-only
0 if no net card, 1 if net card found
                       modems 1.3.6.1.4.1.3052.1.2.4.3 integer read-only
0 if no modem, 1 if modem was found
                       networkenabled 1.3.6.1.4.1.3052.1.2.4.4 integer read-only
0 if not enabled, 1 if enabled
                       memorysize 1.3.6.1.4.1.3052.1.2.4.5 integer read-only
memory size in K
                   factorysetup 1.3.6.1.4.1.3052.1.2.5
                       modemreport 1.3.6.1.4.1.3052.1.2.5.1 displaystring read-write
5-char string, speed to report for modem speed
                       modemportspeed 1.3.6.1.4.1.3052.1.2.5.2 integer read-write
modem port baud rate 38400, 19200, etc.
                       modemsetupstring 1.3.6.1.4.1.3052.1.2.5.3 displaystring read-write
modem setup string, e.g., ATe0v0s0=1
                       modemcddelay 1.3.6.1.4.1.3052.1.2.5.4 integer read-write
seconds after CD before sending answer string
                       modemtype 1.3.6.1.4.1.3052.1.2.5.5 integer read-write
number factory-assigned to this particular modem, manufacturer, etc.
                       serialnumber 1.3.6.1.4.1.3052.1.2.5.6 displaystring read-write
up to 10 chars for factory-assigned serial number
                       dateofmanufacture 1.3.6.1.4.1.3052.1.2.5.7 displaystring read-write
up to 8 chars for factory-assigned date of manufacture
                   databasemode 1.3.6.1.4.1.3052.1.2.6 integer read-write
database compatibility mode, 1 -normal, 2 commandset2, etc.
               unitIds 1.3.6.1.4.1.3052.1.3
                   datalinkSiteId 1.3.6.1.4.1.3052.1.3.1 displaystring read-write
Site ID string
                   idByPortTable 1.3.6.1.4.1.3052.1.3.2 no-access
an id for type of data by port
                       sitebyport 1.3.6.1.4.1.3052.1.3.2.1 no-access
entry for table
                           siteindex 1.3.6.1.4.1.3052.1.3.2.1.1 integer read-only
index for which port
                           siteID 1.3.6.1.4.1.3052.1.3.2.1.2 displaystring read-write
site id or type of data by port
               serialPorts 1.3.6.1.4.1.3052.1.4
                   numberPorts 1.3.6.1.4.1.3052.1.4.1 integer read-only
number of RS232 ports found.
                   portSetupTable 1.3.6.1.4.1.3052.1.4.2 no-access
port setup table, serial params, collect data, etc.
                       portSetupEntry 1.3.6.1.4.1.3052.1.4.2.1 no-access
port setup table, serial params, collect data, etc.
                           portIndex 1.3.6.1.4.1.3052.1.4.2.1.1 integer read-only
index for table
                           portBaud 1.3.6.1.4.1.3052.1.4.2.1.2 integer read-write
baud rate, 19200, 9600, etc.
                           portWord 1.3.6.1.4.1.3052.1.4.2.1.3 integer read-write
word length, must be 7 or 8
                           portParity 1.3.6.1.4.1.3052.1.4.2.1.4 displaystring read-write
a single-char string with values of N E or O
                           portStopbits 1.3.6.1.4.1.3052.1.4.2.1.5 integer read-write
number of stop bits, must be 1
                           portDataStore 1.3.6.1.4.1.3052.1.4.2.1.6 integer read-write
0 data is not stored, 1 data is stored from this port
                           portBinaryMode 1.3.6.1.4.1.3052.1.4.2.1.7 integer read-write
0 data is ASCII, 1 data is binary
                           portWrapMode 1.3.6.1.4.1.3052.1.4.2.1.8 integer read-write
0 oldest data not overwritten, 1 older data is overwritten
                           portHskMode 1.3.6.1.4.1.3052.1.4.2.1.9 integer read-write
HSK mode to use when buffer close to full, 0 none, 1 xon, 2 DTR, 3 DTR and Xon
                           portDateTimeStampMode 1.3.6.1.4.1.3052.1.4.2.1.10 integer read-write
Date/time stamp mode to use,bit mapped bit 0 - do date stamp bit 1 - include year bit 2 - include year 19xx or 20xx bit 3 - include day of week bit 4 - space after date bit 5 - include time bit 6 - include seconds bit 7 - space after time
                           portPTMode 1.3.6.1.4.1.3052.1.4.2.1.11 integer read-write
pass-through access mode. 0=none, 1=by modem, 2=by network any write kills the passthrough connection. any write requires private community name
                           portPTTime 1.3.6.1.4.1.3052.1.4.2.1.12 integer read-only
pass-through access mode time of this connection, in seconds
                           portStoreFile 1.3.6.1.4.1.3052.1.4.2.1.13 integer read-write
selects which data file data from this port is stored into
                           portPtStripOutputLfs 1.3.6.1.4.1.3052.1.4.2.1.14 integer read-write
0/1 no/yes in pass-through, strip LFs going to device on this port
                           portPtStripInputLfs 1.3.6.1.4.1.3052.1.4.2.1.15 integer read-write
0/1 no/yes in pass-through, strip LFs coming from device on this port
                           portlowDTR 1.3.6.1.4.1.3052.1.4.2.1.16 integer read-write
0/1 no/yes set DTR low and only raise it on SysAdmin & bypass connections
               time 1.3.6.1.4.1.3052.1.5
                   currenttime 1.3.6.1.4.1.3052.1.5.1 displaystring read-write
Text string for date and time: SUN 01/02/98 12:34:27
                   autoDstAdjust 1.3.6.1.4.1.3052.1.5.2 integer read-write
0 no adjust, 1 adjust
               snmpsetup 1.3.6.1.4.1.3052.1.6
                   snmpTrapsEnabled 1.3.6.1.4.1.3052.1.6.1 integer read-write
0 do not send any traps, 1 do send traps
                   snmpManagerTable 1.3.6.1.4.1.3052.1.6.2 no-access
management station names and addresses
                       snmpTableEntry 1.3.6.1.4.1.3052.1.6.2.1 no-access
entry for snmp table
                           snmpMgrIndex 1.3.6.1.4.1.3052.1.6.2.1.1 integer read-only
index for table
                           snmpManagerIp 1.3.6.1.4.1.3052.1.6.2.1.2 ipaddress read-write
the ip address of a manager
                           snmpManagerName 1.3.6.1.4.1.3052.1.6.2.1.3 displaystring read-write
the name of a manager, up to 80 chars
                   snmpTrapsAutoRepeatTime 1.3.6.1.4.1.3052.1.6.3 integer read-write
0 do not repeat, else number of minutes to repeat
                   snmpSendTestTrap 1.3.6.1.4.1.3052.1.6.4 integer read-write
0 on read, any Set sends test trap to all managers in table
               passwords 1.3.6.1.4.1.3052.1.7
                   modemPasswords 1.3.6.1.4.1.3052.1.7.1 integer read-write
0 no modem passwords required, 1 modem passwords are required write requires private community name
                   tcpPasswords 1.3.6.1.4.1.3052.1.7.2 integer read-write
0 no telnet/tcp passwords required, 1 passwords are required write requires private community name
                   ftpPasswords 1.3.6.1.4.1.3052.1.7.3 integer read-write
0 no ftp passwords required, 1 passwords are required write requires private community name
                   promptPasswords 1.3.6.1.4.1.3052.1.7.4 integer read-write
0 no Password: prompt, 1 -> show Password: prompt
                   commandPassword 1.3.6.1.4.1.3052.1.7.5
                       commandNeedsPassword 1.3.6.1.4.1.3052.1.7.5.1 integer read-write
0 not needed, 1 is needed write requires private community name
                       commandPasswordTimeout 1.3.6.1.4.1.3052.1.7.5.2 integer read-write
1-99, number of minutes of no activity which auto logs user out
                   passwordTable 1.3.6.1.4.1.3052.1.7.6 no-access
Table of password entries, r-w only with private comm. name
                       passwordTableEntry 1.3.6.1.4.1.3052.1.7.6.1 no-access
entry to password table
                           passwordIndex 1.3.6.1.4.1.3052.1.7.6.1.1 integer read-only
index to password table
                           passwordCommand 1.3.6.1.4.1.3052.1.7.6.1.2 displaystring read-write
password for command access
                           passwordAccess 1.3.6.1.4.1.3052.1.7.6.1.3 displaystring read-write
password for pass-through access
               ftpsetup 1.3.6.1.4.1.3052.1.8
                   ftpAutoDelete 1.3.6.1.4.1.3052.1.8.1 integer read-write
0 files not autodeleted, 1 deleted on reading
                   ftpDataMode 1.3.6.1.4.1.3052.1.8.2 integer read-write
0 normal, 1 compression mode 1, etc.
                   ftpPush 1.3.6.1.4.1.3052.1.8.3
                       ftpPushEnabled 1.3.6.1.4.1.3052.1.8.3.1 integer read-write
0-no, 1-yes, enables ftp data push
                       ftpPushTiming 1.3.6.1.4.1.3052.1.8.3.2 integer read-write
how often data is pushed, 2-255 minutes
                       ftpPushTimer 1.3.6.1.4.1.3052.1.8.3.3 integer read-write
timer which counts to ftpPushTiming
                       ftpPushIPAddress 1.3.6.1.4.1.3052.1.8.3.4 ipaddress read-write
ip address of ftp server to which we push the data
                       ftpPushUser 1.3.6.1.4.1.3052.1.8.3.5 displaystring read-write
text string to send for the user id
                       ftpPushPass 1.3.6.1.4.1.3052.1.8.3.6 displaystring read-write
text string to send for the ftp server password
                       ftpPushAcct 1.3.6.1.4.1.3052.1.8.3.7 displaystring read-write
text string to send for the account, if used
                       ftpPushDir 1.3.6.1.4.1.3052.1.8.3.8 displaystring read-write
text string to send for the directory we CWD to
                       ftppushTable 1.3.6.1.4.1.3052.1.8.3.9 no-access
Table of ftp push enables
                           ftppushTableEntry 1.3.6.1.4.1.3052.1.8.3.9.1 no-access
entry to ftp push table
                               ftppushIndex 1.3.6.1.4.1.3052.1.8.3.9.1.1 integer read-only
index to ftp push table
                               ftppushEnable 1.3.6.1.4.1.3052.1.8.3.9.1.2 integer read-write
enable for ftp push, indexed by file
                       ftpPushAlarms 1.3.6.1.4.1.3052.1.8.3.10 integer read-write
0-no, 1-yes, do we push the ALARMS file
                       ftpPushCount 1.3.6.1.4.1.3052.1.8.3.11 integer read-only
number of ftp data pushes tried since reboot
                       ftpPushStatusMode 1.3.6.1.4.1.3052.1.8.3.12 integer read-write
0-none, 1-append, 2-replace, status file modes
                       ftpPushServerName 1.3.6.1.4.1.3052.1.8.3.13 displaystring read-write
Name of the FTP Push Targer Server
               databases 1.3.6.1.4.1.3052.1.9
                   entireDatabase 1.3.6.1.4.1.3052.1.9.1
                       databaseStatus 1.3.6.1.4.1.3052.1.9.1.1
                           databasePfull 1.3.6.1.4.1.3052.1.9.1.1.1 integer read-only
percentage full of all database
                           databaseSize 1.3.6.1.4.1.3052.1.9.1.1.2 integer read-only
Size of Data Storage Area, in bytes
                           databaseRecordsAvailable 1.3.6.1.4.1.3052.1.9.1.1.3 integer read-only
Records which are available to read, total in all files
                           databaseRecordsDeleted 1.3.6.1.4.1.3052.1.9.1.1.4 integer read-only
Records which are deleted, total in all files
                       databaseAlarmTable 1.3.6.1.4.1.3052.1.9.1.2 no-access
table for levels 1 2 3 of all database alarms and actions
                           databaseAlarmEntry 1.3.6.1.4.1.3052.1.9.1.2.1 no-access
entry for database alarm config and actions table
                               databaseAlarmIndex 1.3.6.1.4.1.3052.1.9.1.2.1.1 integer read-only
Index for table, 1 2 or 3
                               databaseAlarmActive 1.3.6.1.4.1.3052.1.9.1.2.1.2 integer read-write
0/1, 1 = active
                               databaseAlarmThreshold 1.3.6.1.4.1.3052.1.9.1.2.1.3 integer read-write
1-99, percentage full threshold level
                               databaseAlarmBeeperActions 1.3.6.1.4.1.3052.1.9.1.2.1.4 integer read-write
0 1 2, -> none, 1/10 or 10/10
                               databaseAlarmSerialActions 1.3.6.1.4.1.3052.1.9.1.2.1.5 integer read-write
bits 0-7 show which messages 1-8 are sent
                               databaseAlarmPagerActions 1.3.6.1.4.1.3052.1.9.1.2.1.6 integer read-write
bits 0-7 show which pagers 1-8 are used
                               databaseAlarmCalloutActions 1.3.6.1.4.1.3052.1.9.1.2.1.7 integer read-write
bits 0-7 show which modem callouts 1-8 are used
                               databaseAlarmTrapActions 1.3.6.1.4.1.3052.1.9.1.2.1.8 integer read-write
0/1 for traps are sent or not
                       databaseAlarmFileStore 1.3.6.1.4.1.3052.1.9.1.3 integer read-write
0-no, 1-yes, store alarms in the ALARMS file
                       databaseAlarmFileMaxSize 1.3.6.1.4.1.3052.1.9.1.4 integer read-write
in K, max size for alarms file 4-32k
                   databaseFiles 1.3.6.1.4.1.3052.1.9.2
                       filesetup 1.3.6.1.4.1.3052.1.9.2.1
                           charmaskEnabled 1.3.6.1.4.1.3052.1.9.2.1.1 integer read-write
0/1 char masking enabled
                           charmask 1.3.6.1.4.1.3052.1.9.2.1.2 displaystring read-write
32-byte hex ascii for character masking
                           maxRecordChars 1.3.6.1.4.1.3052.1.9.2.1.3 integer read-write
max characters in an ASCII record
                           binRecordBlocking 1.3.6.1.4.1.3052.1.9.2.1.4 integer read-write
# chars max to block binary records into
                           recordCollectionTimeout 1.3.6.1.4.1.3052.1.9.2.1.5 integer read-write
# seconds to allow before terminating a record automatically
                       fileTable 1.3.6.1.4.1.3052.1.9.2.2 no-access
table of directory entries
                           fileTableEntry 1.3.6.1.4.1.3052.1.9.2.2.1 no-access
entry for table
                               fileTableIndex 1.3.6.1.4.1.3052.1.9.2.2.1.1 integer read-only
index for the table
                               fileName 1.3.6.1.4.1.3052.1.9.2.2.1.2 displaystring read-only
name of the file
                               fileType 1.3.6.1.4.1.3052.1.9.2.2.1.3 displaystring read-write
type of data, up to 24 chars
                               fileSize 1.3.6.1.4.1.3052.1.9.2.2.1.4 integer read-only
file size in bytes
                               fileRecords 1.3.6.1.4.1.3052.1.9.2.2.1.5 integer read-only
file size in records
                               fileRecordsAvailable 1.3.6.1.4.1.3052.1.9.2.2.1.6 integer read-only
# recs available
                               fileRecordsDeleted 1.3.6.1.4.1.3052.1.9.2.2.1.7 integer read-only
# recs deleted
                               filePercentNow 1.3.6.1.4.1.3052.1.9.2.2.1.8 integer read-only
% of all of memory this file is, right now
                       fileAlarms 1.3.6.1.4.1.3052.1.9.2.3 no-access
file alarms, indexed by file and threshold
                           fileAlarmEntry 1.3.6.1.4.1.3052.1.9.2.3.1 no-access
entry to the table
                               fileAlarmFileIndex 1.3.6.1.4.1.3052.1.9.2.3.1.1 integer read-only
index for filenumber
                               fileAlarmThresholdIndex 1.3.6.1.4.1.3052.1.9.2.3.1.2 integer read-only
index for filenumber threshold
                               fileAlarmActive 1.3.6.1.4.1.3052.1.9.2.3.1.3 integer read-write
0/1 this file alarm active
                               fileAlarmThreshold 1.3.6.1.4.1.3052.1.9.2.3.1.4 integer read-write
1-99, threshold level
                               fileAlarmBeeperActions 1.3.6.1.4.1.3052.1.9.2.3.1.5 integer read-write
0 1 2, none, 1/10 or 10/10
                               fileAlarmSerialActions 1.3.6.1.4.1.3052.1.9.2.3.1.6 integer read-write
bits 0-7 show which messages 1-8 are sent
                               fileAlarmPagerActions 1.3.6.1.4.1.3052.1.9.2.3.1.7 integer read-write
bits 0-7 show which pagers 1-8 are used
                               fileAlarmCalloutActions 1.3.6.1.4.1.3052.1.9.2.3.1.8 integer read-write
bits 0-7 show which modem callouts 1-8 are used
                               fileAlarmTrapActions 1.3.6.1.4.1.3052.1.9.2.3.1.9 integer read-write
0/1 for traps are sent or not
               alarms 1.3.6.1.4.1.3052.1.10
                     dataAlarmTable 1.3.6.1.4.1.3052.1.10.1 no-access
table of read-only items for data alarm setup
                         dataAlarmEntry 1.3.6.1.4.1.3052.1.10.1.1 no-access
Data alarm table entry
                             dataAlarmIndex 1.3.6.1.4.1.3052.1.10.1.1.1 integer read-only
index for data alarms
                             dataAlarmActive 1.3.6.1.4.1.3052.1.10.1.1.2 integer read-only
0/1 active
                             dataAlarmName 1.3.6.1.4.1.3052.1.10.1.1.3 displaystring read-only
name of alarm
                             dataAlarmCounter 1.3.6.1.4.1.3052.1.10.1.1.4 integer read-only
counter for this alarm
                             dataAlarmThreshold 1.3.6.1.4.1.3052.1.10.1.1.5 integer read-only
threshold for this alarm
                             dataAlarmClearMode 1.3.6.1.4.1.3052.1.10.1.1.6 integer read-only
code for clearing mode
                             dataAlarmClearTime 1.3.6.1.4.1.3052.1.10.1.1.7 displaystring read-only
time of day, e.g., 01:20
                             dataAlarmAcked 1.3.6.1.4.1.3052.1.10.1.1.8 integer read-write
0 on read, any set to ack this alarm
                             dataAlarmBeeperActions 1.3.6.1.4.1.3052.1.10.1.1.9 integer read-only
0 1 2, none, 1/10 or 10/10
                             dataAlarmSerialActions 1.3.6.1.4.1.3052.1.10.1.1.10 integer read-only
bits 0-7 show which messages 1-8 are sent
                             dataAlarmPagerActions 1.3.6.1.4.1.3052.1.10.1.1.11 integer read-only
bits 0-7 show which pagers 1-8 are used
                             dataAlarmCalloutActions 1.3.6.1.4.1.3052.1.10.1.1.12 integer read-only
bits 0-7 show which modem callouts 1-8 are used
                             dataAlarmTrapActions 1.3.6.1.4.1.3052.1.10.1.1.13 integer read-only
0/1 for traps are sent or not
                             dataAlarmString 1.3.6.1.4.1.3052.1.10.1.1.14 displaystring read-only
last data alarm string for this alarm
                             dataAlarmPort 1.3.6.1.4.1.3052.1.10.1.1.15 integer read-only
port number for last data alarm string for this alarm
                             dataAlarmAutoClear 1.3.6.1.4.1.3052.1.10.1.1.16 integer read-only
0/1 disabled/enabled to auto clear counter when it reached threshold
                     sensorAlarmTable 1.3.6.1.4.1.3052.1.10.2 no-access
table of read-only items for sensor alarm setup
                         sensorAlarmEntry 1.3.6.1.4.1.3052.1.10.2.1 no-access
sensor alarm table entry
                             sensorAlarmIndex 1.3.6.1.4.1.3052.1.10.2.1.1 integer read-only
index for sensor alarms
                             sensorAlarmActive 1.3.6.1.4.1.3052.1.10.2.1.2 integer read-write
0/1 active
                             sensorAlarmName 1.3.6.1.4.1.3052.1.10.2.1.3 displaystring read-write
name of alarm
                             sensorAlarmMode 1.3.6.1.4.1.3052.1.10.2.1.4 integer read-write
0 - open active, 1 - closed active
                             sensorAlarmCounter 1.3.6.1.4.1.3052.1.10.2.1.5 integer read-write
counter for this alarm
                             sensorAlarmThreshold 1.3.6.1.4.1.3052.1.10.2.1.6 integer read-write
threshold for this alarm
                             sensorAlarmAcked 1.3.6.1.4.1.3052.1.10.2.1.7 integer read-write
0 on read, any set to ack this alarm
                             sensorAlarmBeeperActions 1.3.6.1.4.1.3052.1.10.2.1.8 integer read-write
0 1 2, none, 1/10 or 10/10
                             sensorAlarmSerialActions 1.3.6.1.4.1.3052.1.10.2.1.9 integer read-write
bits 0-7 show which messages 1-8 are sent
                             sensorAlarmPagerActions 1.3.6.1.4.1.3052.1.10.2.1.10 integer read-write
bits 0-7 show which pagers 1-8 are used
                             sensorAlarmCalloutActions 1.3.6.1.4.1.3052.1.10.2.1.11 integer read-write
bits 0-7 show which modem callouts 1-8 are used
                             sensorAlarmTrapActions 1.3.6.1.4.1.3052.1.10.2.1.12 integer read-write
0/1 for traps are sent or not
                             sensorAlarmState 1.3.6.1.4.1.3052.1.10.2.1.13 integer read-only
0-> open 1-> closed for current state
                     nodataAlarms 1.3.6.1.4.1.3052.1.10.3
                         nodataAlarmStatus 1.3.6.1.4.1.3052.1.10.3.1 no-access
no data status table
                             nodataAlarmStatusEntry 1.3.6.1.4.1.3052.1.10.3.1.1 no-access
status table entry
                                 nodataAlarmStatusIndex 1.3.6.1.4.1.3052.1.10.3.1.1.1 integer read-only
index for table
                                 nodataAlarmStatusCounter 1.3.6.1.4.1.3052.1.10.3.1.1.2 integer read-write
the nodata counter
                                 nodataAlarmStatusAcked 1.3.6.1.4.1.3052.1.10.3.1.1.3 integer read-write
reads as 0, any write acks this alarm
                         nodataTable 1.3.6.1.4.1.3052.1.10.3.2 no-access
nodata table
                             nodataTableEntry 1.3.6.1.4.1.3052.1.10.3.2.1 no-access
nodata defn. table entry
                                 nodataTablePortIndex 1.3.6.1.4.1.3052.1.10.3.2.1.1 integer no-access
index by port
                                 nodataTableScheduleIndex 1.3.6.1.4.1.3052.1.10.3.2.1.2 integer no-access
index by schedule
                                 nodataTableLevelIndex 1.3.6.1.4.1.3052.1.10.3.2.1.3 integer no-access
index by level
                                 nodataTableActive 1.3.6.1.4.1.3052.1.10.3.2.1.4 integer read-write
0/1 , enabled or not
                                 nodataTableSchedule 1.3.6.1.4.1.3052.1.10.3.2.1.5 displaystring read-write
schedule, format is hh:mm-hh:mm
                                 nodataTableThreshold 1.3.6.1.4.1.3052.1.10.3.2.1.6 integer read-write
#minutes for no data for alarm
                                 nodataTableBeeperActions 1.3.6.1.4.1.3052.1.10.3.2.1.7 integer read-write
0 1 2, none, 1/10 or 10/10
                                 nodataTableSerialActions 1.3.6.1.4.1.3052.1.10.3.2.1.8 integer read-write
bits 0-7 show which messages 1-8 are sent
                                 nodataTablePagerActions 1.3.6.1.4.1.3052.1.10.3.2.1.9 integer read-write
bits 0-7 show which pagers 1-8 are used
                                 nodataTableCalloutActions 1.3.6.1.4.1.3052.1.10.3.2.1.10 integer read-write
bits 0-7 show which modem callouts 1-8 are used
                                 nodataTableTrapActions 1.3.6.1.4.1.3052.1.10.3.2.1.11 integer read-write
0/1 for traps are sent or not
                         nodataAlarmHolidays 1.3.6.1.4.1.3052.1.10.3.3
                             nodataNumberHolidays 1.3.6.1.4.1.3052.1.10.3.3.1 integer read-only
number of nodata holidays defined
                             nodataHolidayTable 1.3.6.1.4.1.3052.1.10.3.3.2 no-access
holiday table
                                 nodataHolidayTableEntry 1.3.6.1.4.1.3052.1.10.3.3.2.1 no-access
holiday table entry
                                     nodataHolidayIndex 1.3.6.1.4.1.3052.1.10.3.3.2.1.1 integer read-only
index for holiday list
                                     nodataHolidayItem 1.3.6.1.4.1.3052.1.10.3.3.2.1.2 displaystring read-only
holiday list item, format is mm/dd
                             nodataHolidayAdd 1.3.6.1.4.1.3052.1.10.3.3.3 displaystring read-write
null on read, set with holiday to add MM/DD
                             nodataHolidayDelete 1.3.6.1.4.1.3052.1.10.3.3.4 displaystring read-write
null on read, set with holiday to delete MM/DD
                             nodataHolidayClear 1.3.6.1.4.1.3052.1.10.3.3.5 integer read-write
read returns 0, write requires private community name. used to clear the holiday list
                     scheduleAlarmTable 1.3.6.1.4.1.3052.1.10.4 no-access
scheduled alarm table
                         scheduleAlarmEntry 1.3.6.1.4.1.3052.1.10.4.1 no-access
schedule table entry
                             scheduleIndex 1.3.6.1.4.1.3052.1.10.4.1.1 integer read-only
day index
                             scheduleActive 1.3.6.1.4.1.3052.1.10.4.1.2 integer read-write
if active or not
                             scheduleTime 1.3.6.1.4.1.3052.1.10.4.1.3 displaystring read-write
time of day format is: hh:mm
                             scheduleAcked 1.3.6.1.4.1.3052.1.10.4.1.4 integer read-write
reads 0, any set acks alarm
                             scheduleBeeperActions 1.3.6.1.4.1.3052.1.10.4.1.5 integer read-write
0 1 2, none, 1/10 or 10/10
                             scheduleSerialActions 1.3.6.1.4.1.3052.1.10.4.1.6 integer read-write
bits 0-7 show which messages 1-8 are sent
                             schedulePagerActions 1.3.6.1.4.1.3052.1.10.4.1.7 integer read-write
bits 0-7 show which pagers 1-8 are used
                             scheduleCalloutActions 1.3.6.1.4.1.3052.1.10.4.1.8 integer read-write
bits 0-7 show which modem callouts 1-8 are used
                             scheduleTrapActions 1.3.6.1.4.1.3052.1.10.4.1.9 integer read-write
0/1 for traps are sent or not
               actions 1.3.6.1.4.1.3052.1.11
                     actionsBuzzer 1.3.6.1.4.1.3052.1.11.1
                         actionsBuzzerState 1.3.6.1.4.1.3052.1.11.1.1 integer read-only
current buzzer state 0.1.2
                     actionsSerialTable 1.3.6.1.4.1.3052.1.11.2 no-access
serial message table
                         actionsSerialTableEntry 1.3.6.1.4.1.3052.1.11.2.1 no-access
serial table entry
                             serialTableIndex 1.3.6.1.4.1.3052.1.11.2.1.1 integer read-only
serial table index
                             serialTableMessage 1.3.6.1.4.1.3052.1.11.2.1.2 displaystring read-write
serial table string
                     actionsPagerTable 1.3.6.1.4.1.3052.1.11.3 no-access
pager table
                         actionsPagerTableEntry 1.3.6.1.4.1.3052.1.11.3.1 no-access
pager table entry
                             pagerTableIndex 1.3.6.1.4.1.3052.1.11.3.1.1 integer read-only
table index
                             pagerType 1.3.6.1.4.1.3052.1.11.3.1.2 integer read-write
0-numeric, 1-alpha
                             pagerPhonenumber 1.3.6.1.4.1.3052.1.11.3.1.3 displaystring read-write
phone number to call for pager
                             pagerID 1.3.6.1.4.1.3052.1.11.3.1.4 displaystring read-write
ID or 2nd number to dial
                             pagerDialDelay 1.3.6.1.4.1.3052.1.11.3.1.5 integer read-write
# seconds on numeric to delay between dial and send pagerID or message
                             pagerHangupDelay 1.3.6.1.4.1.3052.1.11.3.1.6 integer read-write
# seconds on numeric to delay between messages and before hangup
                             pagerMessage 1.3.6.1.4.1.3052.1.11.3.1.7 displaystring read-write
message, either alpha or numeric
                             pagerSendId 1.3.6.1.4.1.3052.1.11.3.1.8 integer read-write
0/1 send unit ID or not to pager
                             pagerSendReason 1.3.6.1.4.1.3052.1.11.3.1.9 integer read-write
0/1 send reason for page or not to pager
                             pagerMaxAttempts 1.3.6.1.4.1.3052.1.11.3.1.10 integer read-write
max tries to be successful
                             pagerAttempts 1.3.6.1.4.1.3052.1.11.3.1.11 integer read-write
current number of tries
                             pagerAttemptDelay 1.3.6.1.4.1.3052.1.11.3.1.12 integer read-write
# minutes between attempts
                             pagerRepeat 1.3.6.1.4.1.3052.1.11.3.1.13 integer read-write
0/1 do we repeat successful
                             pagerRepeatDelay 1.3.6.1.4.1.3052.1.11.3.1.14 integer read-write
# minutes between repeats, if used
                     actionsCalloutTable 1.3.6.1.4.1.3052.1.11.4 no-access
callout table
                         actionsCalloutTableEntry 1.3.6.1.4.1.3052.1.11.4.1 no-access
callout table entry
                             calloutTableIndex 1.3.6.1.4.1.3052.1.11.4.1.1 integer read-only
table index
                             calloutPhonenumber 1.3.6.1.4.1.3052.1.11.4.1.2 displaystring read-write
phone number to call for callout
                             calloutMaxConnecttime 1.3.6.1.4.1.3052.1.11.4.1.3 integer read-write
# seconds to wait for carrier
                             calloutMessage 1.3.6.1.4.1.3052.1.11.4.1.4 displaystring read-write
message to send
                             calloutSendId 1.3.6.1.4.1.3052.1.11.4.1.5 integer read-write
0/1 send unit ID or not to callout
                             calloutSendReason 1.3.6.1.4.1.3052.1.11.4.1.6 integer read-write
0/1 send reason for page or not to callout
                             calloutCommandWait 1.3.6.1.4.1.3052.1.11.4.1.7 integer read-write
#seconds to wait for a command on a callout before hangup
                             calloutMaxAttempts 1.3.6.1.4.1.3052.1.11.4.1.8 integer read-write
max tries to be successful
                             calloutAttempts 1.3.6.1.4.1.3052.1.11.4.1.9 integer read-write
current number of tries
                             calloutAttemptDelay 1.3.6.1.4.1.3052.1.11.4.1.10 integer read-write
# minutes between attempts
                             calloutRepeat 1.3.6.1.4.1.3052.1.11.4.1.11 integer read-write
0/1 do we repeat successful
                             calloutRepeatDelay 1.3.6.1.4.1.3052.1.11.4.1.12 integer read-write
# minutes between repeats, if used
                     actionsTraps 1.3.6.1.4.1.3052.1.11.5
                         actionsTrapsEntSpecific 1.3.6.1.4.1.3052.1.11.5.1 integer read-write
0/1 enterprise specific traps enabled
                         actionsTrapsEntSpecCount 1.3.6.1.4.1.3052.1.11.5.2 integer read-only
number of enterprise specific traps sent since last re-boot
               controls 1.3.6.1.4.1.3052.1.12
                     opSettings 1.3.6.1.4.1.3052.1.12.1
                         linefeeds 1.3.6.1.4.1.3052.1.12.1.1 integer read-write
0/1 are linefeeds added to CRs on command responses?
                         duplex 1.3.6.1.4.1.3052.1.12.1.2 integer read-write
0-half 1-full
                         response 1.3.6.1.4.1.3052.1.12.1.3 integer read-write
0-codes 1-words
                         datafilterEnabled 1.3.6.1.4.1.3052.1.12.1.4 integer read-write
0/1 off/on
                         alarmfilterEnabled 1.3.6.1.4.1.3052.1.12.1.5 integer read-write
0/1 off/on
                         auxportMode 1.3.6.1.4.1.3052.1.12.1.6
                             operatingMode 1.3.6.1.4.1.3052.1.12.1.6.1 integer read-write
1 command 2 input/access 3 unused 4 inline 5 extmodem
                             inlineMode 1.3.6.1.4.1.3052.1.12.1.6.2 integer read-write
1,2,3 if inline, mode 1 (N->2) mode 2 (1->2, 3->4) mode 3 (1->2, 3->4, 5->6)
                             inlineSource 1.3.6.1.4.1.3052.1.12.1.6.3 integer read-write
if inline and inlineMode==1, source of I/O2 inline
                             inlineHskMode 1.3.6.1.4.1.3052.1.12.1.6.4
                                 inlineHsk2 1.3.6.1.4.1.3052.1.12.1.6.4.1 integer read-write
handshake mode 0-3 for inline port I/O 2
                                 inlineHsk4 1.3.6.1.4.1.3052.1.12.1.6.4.2 integer read-write
handshake mode 0-3 for inline port I/O 4
                                 inlineHsk6 1.3.6.1.4.1.3052.1.12.1.6.4.3 integer read-write
handshake mode 0-3 for inline port I/O 6
                         sureEnabled 1.3.6.1.4.1.3052.1.12.1.7 integer read-write
0/1 off/on
                         commandTcpipTimeout 1.3.6.1.4.1.3052.1.12.1.8 integer read-write
0-none, else number of no-activity minutes -> tcpip command to drop
                         sysadminTcpipTimeout 1.3.6.1.4.1.3052.1.12.1.9 integer read-write
0-none, else number of no-activity minutes -> tcpip sysadmin to drop
                         bypassEndchar 1.3.6.1.4.1.3052.1.12.1.10 integer read-write
ascii value for character to exit bypass mode. default ->27
                         routerAutoPing 1.3.6.1.4.1.3052.1.12.1.11 integer read-write
0/1 = no/yes, default is 0, do we ping the default router every 10 minutes?
                     modemSettings 1.3.6.1.4.1.3052.1.12.2
                         modemParity 1.3.6.1.4.1.3052.1.12.2.1 integer read-write
1 7E 2 7O 3 8N
                         modemUserSetup 1.3.6.1.4.1.3052.1.12.2.2 displaystring read-write
sent to modem on init before the factory setup string
                         modemTapSetup 1.3.6.1.4.1.3052.1.12.2.3 displaystring read-write
sent to modem on just before doing TAP (alpha pager) protocol
                         modemAnswerString 1.3.6.1.4.1.3052.1.12.2.4 displaystring read-write
sent when modem makes connection
                         modemExtSetup 1.3.6.1.4.1.3052.1.12.2.5 displaystring read-write
sent to ext. modem for setup string
                         modemExtSetupTime 1.3.6.1.4.1.3052.1.12.2.6 integer read-write
# minutes of idle time between sending ext. modem setup string
                         modemInactivityTimer 1.3.6.1.4.1.3052.1.12.2.7 integer read-write
# minutes of no transmit which aborts a connection
                         modemAutoexecString 1.3.6.1.4.1.3052.1.12.2.8 displaystring read-write
command string which auto-executes after modem connection if no other command within 10 seconds
                         modemAutoexecEnabled 1.3.6.1.4.1.3052.1.12.2.9 integer read-write
0/1 autoexec enabled
                         modemTimeBetweenOutbound 1.3.6.1.4.1.3052.1.12.2.10 integer read-write
# seconds (minimum) between outbound call attempts
                     dataRelease 1.3.6.1.4.1.3052.1.12.3
                         releaseMode 1.3.6.1.4.1.3052.1.12.3.1 integer read-write
1-Line 3-CBB 4-Xmodem
                         autodeleteEnable 1.3.6.1.4.1.3052.1.12.3.2 integer read-write
1/2 off/on autodelete for CBB and Xmodem
                         releaseCompressed 1.3.6.1.4.1.3052.1.12.3.3 integer read-write
1-compressed 2-decompressed
                     otherControls 1.3.6.1.4.1.3052.1.12.4
                         waitMode 1.3.6.1.4.1.3052.1.12.4.1 integer read-write
1/2 off/on wait for 02 after 01 on rlmodes
                         tagMode 1.3.6.1.4.1.3052.1.12.4.2 integer read-write
1/2 off/on Line/Block tag enabled
                         crcMode 1.3.6.1.4.1.3052.1.12.4.3 integer read-write
1/2 off/on add CRC to ascii releases
                         dleMode 1.3.6.1.4.1.3052.1.12.4.4 integer read-write
1/2 off/on use DLE stuffing on CBB
                         cbbRetransmits 1.3.6.1.4.1.3052.1.12.4.5 integer read-write
# times a block retransmitted in CBB mode
                         cbbTimeout 1.3.6.1.4.1.3052.1.12.4.6 integer read-write
# seconds to wait for an ack before retransmit in CBB mode
                     activeDatabase 1.3.6.1.4.1.3052.1.12.5 integer read-write
selects a file. ports 2001-2006 auto select this variable
               alarmhistory 1.3.6.1.4.1.3052.1.13
                     actionQueue 1.3.6.1.4.1.3052.1.13.1
                         actionCount 1.3.6.1.4.1.3052.1.13.1.1 integer read-only
number of active items in action table, 0-nn
                         actionTable 1.3.6.1.4.1.3052.1.13.1.2 no-access
action queue table
                             actionTableEntry 1.3.6.1.4.1.3052.1.13.1.2.1 no-access
action queue entry
                                 actionTableIndex 1.3.6.1.4.1.3052.1.13.1.2.1.1 integer read-only
action table entry
                                 actionAcked 1.3.6.1.4.1.3052.1.13.1.2.1.2 integer read-write
reads 0, any set removes (acks) this action
                                 actionReason 1.3.6.1.4.1.3052.1.13.1.2.1.3 integer read-only
code reason for action
                                 actionReasonID 1.3.6.1.4.1.3052.1.13.1.2.1.4 integer read-only
which of the (reasons) e.g, alarm 3 vs. alarm 4
                                 actionReasonLevel 1.3.6.1.4.1.3052.1.13.1.2.1.5 integer read-only
which of the levels for alarms which have 1-3 levels
                                 actionType 1.3.6.1.4.1.3052.1.13.1.2.1.6 integer read-only
type of action being taken (page, callout, etc.)
                                 actionTypeID 1.3.6.1.4.1.3052.1.13.1.2.1.7 integer read-only
which of the actions e.g, pager 3 vs. pager 4
                                 actionRepeatTime 1.3.6.1.4.1.3052.1.13.1.2.1.8 integer read-only
#minutes between repeats of attempts of this action
                                 actionAttempts 1.3.6.1.4.1.3052.1.13.1.2.1.9 integer read-only
# of attempts to try this action so far
                                 actionNextAttempt 1.3.6.1.4.1.3052.1.13.1.2.1.10 integer read-only
# minutes until the next attempt of this action
                                 actionTimeStamp 1.3.6.1.4.1.3052.1.13.1.2.1.11 displaystring read-only
date and time string: 02/34 12:34, or text message if no items
                     actionHistory 1.3.6.1.4.1.3052.1.13.2
                         historyCount 1.3.6.1.4.1.3052.1.13.2.1 integer read-only
number of history items in history table, 0-nn
                         historyTable 1.3.6.1.4.1.3052.1.13.2.2 no-access
action history table
                             historyTableEntry 1.3.6.1.4.1.3052.1.13.2.2.1 no-access
history queue entry
                                 historyTableIndex 1.3.6.1.4.1.3052.1.13.2.2.1.1 integer read-only
history table entry
                                 historyEntryType 1.3.6.1.4.1.3052.1.13.2.2.1.2 integer read-write
type of entry (e.g., modem fail, pager pass, etc.)
                                 historyReason 1.3.6.1.4.1.3052.1.13.2.2.1.3 integer read-only
code reason for history
                                 historyReasonID 1.3.6.1.4.1.3052.1.13.2.2.1.4 integer read-only
which of the (reasons) e.g, alarm 3 vs. alarm 4
                                 historyReasonLevel 1.3.6.1.4.1.3052.1.13.2.2.1.5 integer read-only
which of the levels for alarms which have 1-3 levels
                                 historyType 1.3.6.1.4.1.3052.1.13.2.2.1.6 integer read-only
type of history being taken (page, callout, etc.)
                                 historyTypeID 1.3.6.1.4.1.3052.1.13.2.2.1.7 integer read-only
which of the historys e.g, pager 3 vs. pager 4
                                 historyTimeStamp 1.3.6.1.4.1.3052.1.13.2.2.1.8 displaystring read-only
date and time string: 02/34 12:34, or text message if no items
                                 historyClearLog 1.3.6.1.4.1.3052.1.13.2.2.1.9 integer read-write
reads 0, any set clears all history log items
                     lastCalloutPageReason 1.3.6.1.4.1.3052.1.13.3 displaystring read-only
the reason string for the last callout or page, or NONE if never used
               realtimesocket 1.3.6.1.4.1.3052.1.14
                     rtsShowAnswer 1.3.6.1.4.1.3052.1.14.1 integer read-write
0-no 1-yes, show answer string on connection (deprecated)
                     rtsNeedPassword 1.3.6.1.4.1.3052.1.14.2 integer read-only
0-no 1-yes, need password on RTS connection (deprecated)
                     rtsWaitXon 1.3.6.1.4.1.3052.1.14.3 integer read-write
0-no 1-yes, wait for Xon after connection before sending data (deprecated)
                     rtsIdleTimeout 1.3.6.1.4.1.3052.1.14.4 integer read-write
0-255, 0-none, 1-255 #idle minutes no data = shutdown socket (deprecated)
                     rtsEmptyClose 1.3.6.1.4.1.3052.1.14.5 integer read-write
0->no, 1-> yes, when file empty close socket (polling, not rt data) (deprecated)
                     rtsTable 1.3.6.1.4.1.3052.1.14.6 no-access
real time socket table
                         rtsTableEntry 1.3.6.1.4.1.3052.1.14.6.1 no-access
rts table entry
                             rtsTableIndex 1.3.6.1.4.1.3052.1.14.6.1.1 integer read-only
rts table entry index
                             rtsNoStore 1.3.6.1.4.1.3052.1.14.6.1.2 integer read-write
0-allow storage, 1-don't store data when RTS socket not connected
                             rtsDenied 1.3.6.1.4.1.3052.1.14.6.1.3 integer read-write
0-don't allow, 1=yes allow this rts socket to connect
                             rtsSocketState 1.3.6.1.4.1.3052.1.14.6.1.4 integer read-only
0-closed, 1-wait for pass, 2-wait for xon, 3=open for data
                             rtsPortShowAnswer 1.3.6.1.4.1.3052.1.14.6.1.5 integer read-write
0-no 1-yes, show answer string on connection
                             rtsPortNeedPassword 1.3.6.1.4.1.3052.1.14.6.1.6 integer read-only
0-no 1-yes, need password on RTS connection
                             rtsPortWaitXon 1.3.6.1.4.1.3052.1.14.6.1.7 integer read-write
0-no 1-yes, wait for Xon after connection before sending data
                             rtsPortIdleTimeout 1.3.6.1.4.1.3052.1.14.6.1.8 integer read-write
0-255, 0-none, 1-255 #idle minutes no data = shutdown socket
                             rtsPortEmptyClose 1.3.6.1.4.1.3052.1.14.6.1.9 integer read-write
0->no, 1-> yes, when file empty close socket (polling, not rt data)
               iprestrictions 1.3.6.1.4.1.3052.1.15
                     iprestrictTable 1.3.6.1.4.1.3052.1.15.1 no-access
ip restrictions table
                         iprestrictTableEntry 1.3.6.1.4.1.3052.1.15.1.1 no-access
ip restriction table entry
                             iprestrictTableIndex 1.3.6.1.4.1.3052.1.15.1.1.1 integer read-only
ip restrict table entry index
                             iprestrictIpAddress 1.3.6.1.4.1.3052.1.15.1.1.2 ipaddress read-only
an ip address which forces a restriction or allowance for an ip range
                     suspendIPRestrictions 1.3.6.1.4.1.3052.1.15.2 integer read-write
read returns 0, writing requires the private community name. default is 0 set to 1 to suspend IP restrictions while loading the list set back to 0 to allow the restrictions to be used.
                     killIPRestrictions 1.3.6.1.4.1.3052.1.15.3 integer read-write
read returns 0, writing requires the private community name. any set removes all entries from the IP restrcition list.
                     addIPRestrictions 1.3.6.1.4.1.3052.1.15.4 ipaddress read-write
read returns 0, writing requires the private community name. any set adds an entry to the IP restriction list note that list is no re-sorted, so must add in order
               ipsetup 1.3.6.1.4.1.3052.1.16
                     ipCurrent 1.3.6.1.4.1.3052.1.16.1
                         ipCurrentStatic 1.3.6.1.4.1.3052.1.16.1.1 integer read-only
1=static, 0=dynamic
                         ipCurrentAddress 1.3.6.1.4.1.3052.1.16.1.2 ipaddress read-only
current IP address
                         ipCurrentSubnetMask 1.3.6.1.4.1.3052.1.16.1.3 ipaddress read-only
current subnet mask
                         ipCurrentDefaultRouter 1.3.6.1.4.1.3052.1.16.1.4 ipaddress read-only
current default router
                     ipNew 1.3.6.1.4.1.3052.1.16.2
                         ipNewStatic 1.3.6.1.4.1.3052.1.16.2.1 integer read-write
1=static, 0=dynamic. write requires private community name.
                         ipNewAddress 1.3.6.1.4.1.3052.1.16.2.2 ipaddress read-write
read=current new address, write requires private community name.
                         ipNewSubnetMask 1.3.6.1.4.1.3052.1.16.2.3 ipaddress read-write
read=current new subnet mask, write requires private community name.
                         ipNewDefaultRouter 1.3.6.1.4.1.3052.1.16.2.4 ipaddress read-write
read=current new default router, write requires private community name.
                         ipNewSetup 1.3.6.1.4.1.3052.1.16.2.5 integer read-write
read=0. write requires private community name. any write causes the current object values for ipNewStatic, ipNewAddress, ipNewSubnetMask and ipNewDefaultRouter to be used. Causes the unit to re-initialize its network stacks with these new values. Changes to ipNewStatic, ipNewAddress, ipNewSubnetMask and ipNewDefaultRouter do not affect the network stack until ipNewSetup is written with some value:
               pppsetup 1.3.6.1.4.1.3052.1.17
                     pppIdentification 1.3.6.1.4.1.3052.1.17.1
                         pppIDString 1.3.6.1.4.1.3052.1.17.1.1 displaystring read-write
sent in ppp up trap to provide host identification string
                         pppIPAddress 1.3.6.1.4.1.3052.1.17.1.2 ipaddress read-only
sent in ppp up trap to provide host identification by IP address
               ccode 1.3.6.1.4.1.3052.1.18
                     ccodeLoaded 1.3.6.1.4.1.3052.1.18.1 integer read-only
0/1, no/yes, is ccode loaded
                     ccodeRunning 1.3.6.1.4.1.3052.1.18.2 integer read-only
0/1, no/yes, is ccode running
                     ccodeStackMainWas 1.3.6.1.4.1.3052.1.18.3 integer read-only
# of bytes of stack used by main app, last time run
                     ccodeStackMainNow 1.3.6.1.4.1.3052.1.18.4 integer read-only
# of bytes of stack used by main app, this time run
                     ccodeStackT2Was 1.3.6.1.4.1.3052.1.18.5 integer read-only
# of bytes of stack used by 2nd task of app, last time run
                     ccodeStackT2Was2 1.3.6.1.4.1.3052.1.18.6 integer read-only
# of bytes of stack used by 2nd task of app, this time run
               techsupport 1.3.6.1.4.1.3052.1.99
                     techsupportInt1 1.3.6.1.4.1.3052.1.99.1 integer read-write
a debugging integer for technical support use only. Do not use
                     techsupportInt2 1.3.6.1.4.1.3052.1.99.2 integer read-write
a debugging integer for technical support use only. Do not use
                     techsupportInt3 1.3.6.1.4.1.3052.1.99.3 integer read-write
a debugging integer for technical support use only. Do not use
                     techsupportInt4 1.3.6.1.4.1.3052.1.99.4 integer read-write
a debugging integer for technical support use only. Do not use
                     techsupportInt5 1.3.6.1.4.1.3052.1.99.5 integer read-write
a debugging integer for technical support use only. Do not use
             datalinkDbasePfullTrap 1.3.6.1.4.1.30520.501
The datalinkDbasePfullTrap is issued when the database reaches a pre-determined threshold level, which causes a trap.
             datalinkFilePfullTrap 1.3.6.1.4.1.30520.502
The datalinkFilePfullTrap is issued when one of the data files reaches a pre-determined threshold level, which causes a trap.
             datalinkDataAlarmTrap 1.3.6.1.4.1.30520.503
The datalinkDataAlarmTrap is issued when one of the data alarms reaches a pre-determined threshold level, which causes a trap.
             datalinkSensorAlarmTrap 1.3.6.1.4.1.30520.504
The datalinkSensorAlarmTrap is issued when one of the External Sensors is triggered for a pre-determined threshold amount of time, which causes a trap.
             datalinkNoDataAlarmTrap 1.3.6.1.4.1.30520.505
The datalinkNoDataAlarmTrap is issued when one of the ports receives no input data for a pre-determined threshold amount of time, which causes a trap.
             datalinkSchedTrap 1.3.6.1.4.1.30520.506
The datalinkSchedTrap is issued when a scheduled event causes a trap.
             datalinkImmediateTrap 1.3.6.1.4.1.30520.507
The datalinkImmediateTrap is issued when the dotrap command is used to issue a test trap to all snmp managers
             datalinkPPPupTrap 1.3.6.1.4.1.30520.509
The datalinkPPPupTrap is issued when the PPP interface is brought up and the ppp connection has been established