DASAN-SHDSL-MIB: View SNMP OID List / Download MIB

VENDOR: DASAN CO.,LTD.


 Home MIB: DASAN-SHDSL-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, DASAN-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 dasanShdslMIB 1.3.6.1.4.1.6296.9.6
The MIB module to describe G.SHDSL product. The MIB module that provides objects that are proprietary and extension to SHDSL- LINE-MIB. The MIB include extension to following Tables. The MIB also include a set of scalar(s) clubbed under the group 'dsShdslCapabilityGroup'.
     dasanShdslLineMIB 1.3.6.1.4.1.6296.9.6.1
         dasanShdslMIBObjects 1.3.6.1.4.1.6296.9.6.1.1
             dsShdslCapabilityGroup 1.3.6.1.4.1.6296.9.6.1.1.1
                 dsShdslCapabilityLineTxCap 1.3.6.1.4.1.6296.9.6.1.1.1.1 bits read-only
This bitmap specifies the transmission modes that the STU-C is capable of supporting. Right now, support for Annex A (q9921PotsNonOverlapped(2) and q9921PotsOverlapped(3)) is present. This value depends on the DSL PHY firmware present on Columbia MxU. Bits: 'region2': 1, 'region1': 0.
             dsShdslLineStatusTable 1.3.6.1.4.1.6296.9.6.1.1.2 no-access
This MO is proprietary extension of RFC 3276 MIB and contains the proprietary line status.
                 dsShdslLineStatusEntry 1.3.6.1.4.1.6296.9.6.1.1.2.1 no-access
An entry (conceptual row) in the dsShdslLineStatusTable. The Table is indexed by ifIndex.
                     dsShdslOpState 1.3.6.1.4.1.6296.9.6.1.1.2.1.1 integer read-only
This object identifies the high level operational state for the STU. Enumeration: 'training': 24, 'rmtFramerLb': 130, 'pSDTest': 139, 'analogLb': 128, 'lclFramerLb': 142, 'spectrumTest': 133, 'handshake': 16, 'digLbBertTest': 146, 'framerGearShift': 26, 'bertTest': 144, 'idle': 0, 'analogLbBertTest': 145, 'interfaceLb': 143, 'pmms': 20, 'bootupLoad': 8, 'selt': 138, 'bootupLoadDone': 9, 'framerManualReset': 27, 'data': 1, 'silence': 29, 'digitalLb': 131.
                     dsShdslStartProgress 1.3.6.1.4.1.6296.9.6.1.1.2.1.2 integer read-only
This object identifies the current detailed operational state of the STU. Enumeration: 'loadCodm': 147, 'coLineAgc': 64, 'loadCotrain': 145, 'noActivity': 0, 'dlbTestOk': 115, 'cpLineAgc': 65, 'equalizerTrain': 67, 'receiveTc': 73, 'transmitTc': 69, 'fdEcTrain': 66, 'tipRingAligned': 68, 'receiveTr': 70, 'transmitTr': 74, 'loadCptom': 130, 'framerSyncFail': 117, 'checkBitrate': 7, 'loadCpdm': 131, 'transmitCr': 55, 'loadCopa': 144, 'activation': 4, 'receiveFc': 75, 'loadCptrain': 129, 'loadCotom': 146, 'snrMarginFail': 118, 'transmitFc1': 71, 'transmitFc2': 72, 'loadCppa': 128, 'preActivation': 1, 'transmitSc': 56, 'crcFail': 116, 'spectTestOk': 113, 'transmitSr': 57, 'albTestOk': 114, 'pmmsChkComnRate': 8.
                     dsShdslFwRelease 1.3.6.1.4.1.6296.9.6.1.1.2.1.3 octet string read-only
Transceiver firmware release number.
                     dsShdslLineSwap 1.3.6.1.4.1.6296.9.6.1.1.2.1.4 integer read-only
This object indicates if the physical lines are swapped, i.e., logical channel A is connected to physical channel B. This applies to 4-wire operation only. Enumeration: 'unswapped': 0, 'swapped': 1.
                     dsShdslRmtCountryCode 1.3.6.1.4.1.6296.9.6.1.1.2.1.5 octet string read-only
This object provides the country code word, as defined in ITU-T G.991.2, for the STU at the other end of the loop. GlobespanVirata sets this to USA.
                     dsShdslRmtEncoderA 1.3.6.1.4.1.6296.9.6.1.1.2.1.6 integer read-only
This object identifies the 21-bit value corresponding to encoder coefficient A, as defined in ITU-T G.991.2, for the STU at the other end of the loop.
                     dsShdslRmtEncoderB 1.3.6.1.4.1.6296.9.6.1.1.2.1.7 integer read-only
This object identifies the 21-bit value corresponding to encoder coefficient B, as defined in ITU-T G.991.2, for the STU at the other end of the loop.
                     dsShdslRmtProviderCode 1.3.6.1.4.1.6296.9.6.1.1.2.1.8 octet string read-only
This object identifies the provider code word, as defined in ITU-T G.991.2, for the STU at the other end of the loop.
                     dsShdslLocDetect 1.3.6.1.4.1.6296.9.6.1.1.2.1.9 integer read-only
This object is used to determine if carrier has been lost.
                     dsShdslTxPower 1.3.6.1.4.1.6296.9.6.1.1.2.1.10 integer read-only
This object identifies the local STU transmit power in tenths of a dBm.
                     dsShdslFramerSync 1.3.6.1.4.1.6296.9.6.1.1.2.1.11 integer read-only
This object returns information regarding the framer synchronization status. Enumeration: 'inSync': 1, 'outOfSync': 0.
                     dsShdslRmtTomData 1.3.6.1.4.1.6296.9.6.1.1.2.1.12 integer read-only
This object provides vendor-provided data, as defined in ITU-T G.991.2, for the STU at the other end of the loop.
                     dsShdslDriftAlarm 1.3.6.1.4.1.6296.9.6.1.1.2.1.13 integer read-only
This object identifies if the receive clock is in or out of range.
                     dsShdslReceiverGain 1.3.6.1.4.1.6296.9.6.1.1.2.1.14 integer read-only
This object provides the total receiver gain in dB.
                     dsShdslBertError 1.3.6.1.4.1.6296.9.6.1.1.2.1.15 integer read-only
This object provides the count of bit errors since the last time the object was read, as well as the type of synchronization. Enumeration: 'unframedSync': 128, 'framedSync': 64, 'outOfSync': 0.
                     dsShdslFramerOHAndDefects 1.3.6.1.4.1.6296.9.6.1.1.2.1.16 octet string read-only
This object returns overhead data. The four least significant bits contain the overhead data in the following format: bit 0 is losd, bit 1 is sega, bit 2 is ps, and bit 3 is segd.
                     dsShdslRmtFwVersion 1.3.6.1.4.1.6296.9.6.1.1.2.1.17 integer read-only
This object provides the transceiver firmware release number of the STU at the other end of the loop.
                     dsShdslUtopiaCellDelineation 1.3.6.1.4.1.6296.9.6.1.1.2.1.18 integer read-only
This object indicates whether cell delineation has been found. Enumeration: 'hunt': 240, 'preSync': 160, 'inSync': 1.
                     dsShdslUtopiaRxCellCnt 1.3.6.1.4.1.6296.9.6.1.1.2.1.19 integer read-only
This object indicates the number of UTOPIA cells received since the last time the object has been called. The maximum value is 0xFFFF.
                     dsShdslUtopiaCellDropCnt 1.3.6.1.4.1.6296.9.6.1.1.2.1.20 integer read-only
This object indicates the number of UTOPIA cells dropped since the last time the object has been called. The maximum value is 0xFF.
                     dsShdslUtopiaRxHecErrorCnt 1.3.6.1.4.1.6296.9.6.1.1.2.1.21 integer read-only
This object indicates the number of UTOPIA cells with HEC errors since the last time the object has been called. The maximum value is 0xFF.
                     dsShdslUtopiaTxCellCnt 1.3.6.1.4.1.6296.9.6.1.1.2.1.22 integer read-only
This object indicates the number of UTOPIA cells transmitted since the last time the object has been called. The maximum value is 0xFFFF.
                     dsShdslRmtNsfCusId 1.3.6.1.4.1.6296.9.6.1.1.2.1.23 integer read-only
This object returns the customer identification that was sent by the STU at the other end of the loop.
                     dsShdslRmtNsfCusData 1.3.6.1.4.1.6296.9.6.1.1.2.1.24 octet string read-only
This object returns non-standard format customer data that was sent by the STU at the other end of the loop.
                     dsShdslLocalHandshake 1.3.6.1.4.1.6296.9.6.1.1.2.1.25 octet string read-only
This object provides a way to see what capabilities are supported by the local STU. A total of 26 handshake parameters are supported.
                     dsShdslRemoteHandshake 1.3.6.1.4.1.6296.9.6.1.1.2.1.26 octet string read-only
This object provides a way to see what capabilities are supported by the STU at the other end of the loop. A total of 26 handshake parameters are supported.
                     dsShdslActualHandshake 1.3.6.1.4.1.6296.9.6.1.1.2.1.27 octet string read-only
This object provides the results of capabilities exchanged during handshake. A total of 26 handshake parameters are supported.
                     dsShdslRmtTxPower 1.3.6.1.4.1.6296.9.6.1.1.2.1.28 integer read-only
This object provides the transmit power of the STU at the other end of the loop.
                     dsShdslRmtPowerBackoff 1.3.6.1.4.1.6296.9.6.1.1.2.1.29 integer read-only
This object indicates whether power backoff is enabled or disabled at the STU at the other end of the loop. Enumeration: 'enable': 0, 'disable': 32768.
                     dsShdslAutoRetrainCount 1.3.6.1.4.1.6296.9.6.1.1.2.1.30 integer read-only
This object indicates the number of automatic retrains. This counter is only reset when a startup is initiated.
                     dsShdslEocState 1.3.6.1.4.1.6296.9.6.1.1.2.1.31 integer read-only
This object provides status information about the eoc stage. Enumeration: 'discovery': 1, 'cmdInProgress': 4, 'inventory': 2, 'configuration': 3, 'online': 0.
                     dsShdslFramerOneSecondCnt 1.3.6.1.4.1.6296.9.6.1.1.2.1.32 octet string read-only
This object provides CRC, SEGA, and LOSW defect one second error counts, and should be called every second.
                     dsShdslNtrFault 1.3.6.1.4.1.6296.9.6.1.1.2.1.33 integer read-only
This object identifies the Network Timing Recovery Fault. Enumeration: 'absent': 1, 'present': 0.
                     dsShdslCpeMasterCore 1.3.6.1.4.1.6296.9.6.1.1.2.1.34 integer read-only
Enumeration: 'noMasterCore': 128, 'core2': 32, 'core3': 48, 'core0': 0, 'core1': 16, 'core6': 96, 'core7': 112, 'core4': 64, 'core5': 80.
                     dsShdslParametricTestResult 1.3.6.1.4.1.6296.9.6.1.1.2.1.35 integer read-only
Indicates the Result of the Parametric Test conducted on the Xcvr. Enumeration: 'fail': 1, 'pass': 0.
                     dsShdslParametricTestArray 1.3.6.1.4.1.6296.9.6.1.1.2.1.36 octet string read-only
Conexant parameter that indicates the Parametric Test Array.
             dsShdslLineParamsTable 1.3.6.1.4.1.6296.9.6.1.1.3 no-access
This MO is proprietary extension of RFC 3276 MIB and contains the proprietary line parameters.
                 dsShdslLineParamsEntry 1.3.6.1.4.1.6296.9.6.1.1.3.1 no-access
An entry (conceptual row) in the dsShdslLineParamsTable. The Table is indexed by ifIndex.
                     dsShdslAction 1.3.6.1.4.1.6296.9.6.1.1.3.1.1 integer read-write
This object specifies actions that are used to control transceiver operation. Enumeration: 'spectrumTxRxReq': 32, 'propEocOnReq': 45, 'bertStopReq': 20, 'residualEchoReq': 34, 'abortReq': 2, 'hybridLossTestReq': 33, 'spectrumUpReq': 26, 'startUp': 0, 'rmtFullStatusReq': 48, 'autoRetrainOffReq': 38, 'bertStartRxReq': 18, 'downloadReq': 8, 'spectrumDownReq': 25, 'rmtAtmCellStatusReq': 47, 'propEocOffReq': 46, 'totalEchoReq': 35, 'gearShiftReq': 6, 'autoRetrainOnReq': 37, 'bertStartTxReq': 17, 'nextPsdReq': 36.
                     dsShdslMode 1.3.6.1.4.1.6296.9.6.1.1.3.1.2 integer read-write
This object specifies the operational mode of the transceiver. Enumeration: 'co': 0, 'cpe': 1.
                     dsShdslPowerScale 1.3.6.1.4.1.6296.9.6.1.1.3.1.3 integer read-write
This object is used to compensate for minor differences in transmit power between designs. Enumeration: 'defaultScale': 26112.
                     dsShdslFramerType 1.3.6.1.4.1.6296.9.6.1.1.3.1.4 integer read-only
This object defines which type of data interface type is used. Note that the non-default values only apply to Conexant chips that support serial interfaces. Enumeration: 'vC12': 8, 'iMA': 9, 'unframed': 0, 'serialATM': 7, 'utopiaL2': 3, 'nx64': 6, 't1Slotted': 1, 'e1Slotted': 2.
                     dsShdslAFEType 1.3.6.1.4.1.6296.9.6.1.1.3.1.5 integer read-only
This objects defines which AFE is being used. Enumeration: 'saturn': 3, 'saturnLg': 4.
                     dsShdslEncodeCoeffA 1.3.6.1.4.1.6296.9.6.1.1.3.1.6 integer read-write
This object determines the value of encoder coefficient A, as defined in ITU-T G.991.2. Enumeration: 'default': 366.
                     dsShdslEncodeCoeffB 1.3.6.1.4.1.6296.9.6.1.1.3.1.7 integer read-write
This object determines the value of encoder coefficient B, as defined in ITU-T G.991.2 Enumeration: 'default': 817.
                     dsShdslTxEOCBufferLen 1.3.6.1.4.1.6296.9.6.1.1.3.1.8 integer read-write
This object determines the number of bytes of EOC data that is buffered by the DSP in the transmit direction. Enumeration: 'dsShdslLineParamsTable20': 20, 'dsShdslLineParamsTable60': 60, 'dsShdslLineParamsTable30': 30, 'dsShdslLineParamsTable15': 15, 'dsShdslLineParamsTable35': 35, 'dsShdslLineParamsTable25': 25, 'dsShdslLineParamsTable5': 5, 'dsShdslLineParamsTable10': 10, 'dsShdslLineParamsTable45': 45, 'dsShdslLineParamsTable50': 50, 'dsShdslLineParamsTable40': 40, 'dsShdslLineParamsTable55': 55.
                     dsShdslRxEOCBufferLen 1.3.6.1.4.1.6296.9.6.1.1.3.1.9 integer read-write
This object determines the number of bytes of EOC data that is buffered by the DSP in the receive direction. Enumeration: 'dsShdslLineParamsTable20': 20, 'dsShdslLineParamsTable60': 60, 'dsShdslLineParamsTable30': 30, 'dsShdslLineParamsTable15': 15, 'dsShdslLineParamsTable35': 35, 'dsShdslLineParamsTable25': 25, 'dsShdslLineParamsTable5': 5, 'dsShdslLineParamsTable10': 10, 'dsShdslLineParamsTable45': 45, 'dsShdslLineParamsTable50': 50, 'dsShdslLineParamsTable40': 40, 'dsShdslLineParamsTable55': 55.
                     dsShdslNTR 1.3.6.1.4.1.6296.9.6.1.1.3.1.10 integer read-write
This object defines how network-timing recovery is performed. Enumeration: 'refClkOp4096k': 4, 'disable': 1, 'refClkIp8k': 2.
                     dsShdslRxUpstreamFrameSync 1.3.6.1.4.1.6296.9.6.1.1.3.1.11 integer read-write
Customer-defined value. This object defines the upstream frame sync word.
                     dsShdslRxDownstreamFrameSync 1.3.6.1.4.1.6296.9.6.1.1.3.1.12 integer read-write
This object defines the downstream frame sync word.
                     dsShdslRxUpstreamStuffBits 1.3.6.1.4.1.6296.9.6.1.1.3.1.13 integer read-write
Customer-defined value. This object defines the upstream.
                     dsShdslRxDownstreamStuffBits 1.3.6.1.4.1.6296.9.6.1.1.3.1.14 integer read-write
This object defines the downstream stuff bits.
                     dsShdslInitiate 1.3.6.1.4.1.6296.9.6.1.1.3.1.15 integer read-write
This object defines which STU initiates a startup. The default is STU-R initiates and STU-C waits. Enumeration: 'default': 0, 'co': 1, 'cpe': 2.
                     dsShdslFramerRxClockMode 1.3.6.1.4.1.6296.9.6.1.1.3.1.16 integer read-write
This object determines the source of the receive clock. Enumeration: 'internal': 3, 'slave': 2.
                     dsShdslFramerRxPllMode 1.3.6.1.4.1.6296.9.6.1.1.3.1.17 integer read-write
This object enables or disables the internal PLL. Enumeration: 'enable': 1, 'disable': 0.
                     dsShdslSerialAtmCiuBufferSize 1.3.6.1.4.1.6296.9.6.1.1.3.1.18 integer read-write
This object enables the user to set the size of the framer buffer for serial ATM operation. Enumeration: 'dsShdslLineParamsTable53': 53, 'dsShdslLineParamsTable24': 24.
                     dsShdslUtopiaL2TxAddress 1.3.6.1.4.1.6296.9.6.1.1.3.1.19 integer read-only
This object selects the appropriate UTOPIA Level 2 address for the transmit interface.
                     dsShdslUtopiaL2RxAddress 1.3.6.1.4.1.6296.9.6.1.1.3.1.20 integer read-only
This object selects the appropriate UTOPIA Level 2 address for the receive interface.
                     dsShdslTxFramerPulseDelay 1.3.6.1.4.1.6296.9.6.1.1.3.1.21 integer read-write
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, a delay of up to 7 clock cycles can be specified for the transmit frame pulse. Enumeration: 'dsShdslLineParamsTable4': 4, 'dsShdslLineParamsTable5': 5, 'dsShdslLineParamsTable6': 6, 'dsShdslLineParamsTable7': 7, 'dsShdslLineParamsTable0': 0, 'dsShdslLineParamsTable1': 1, 'dsShdslLineParamsTable2': 2, 'dsShdslLineParamsTable3': 3.
                     dsShdslRxFramerPulseDelay 1.3.6.1.4.1.6296.9.6.1.1.3.1.22 integer read-write
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, a delay of up to 7 clock cycles can be specified for the receive frame pulse. Enumeration: 'dsShdslLineParamsTable4': 4, 'dsShdslLineParamsTable5': 5, 'dsShdslLineParamsTable6': 6, 'dsShdslLineParamsTable7': 7, 'dsShdslLineParamsTable0': 0, 'dsShdslLineParamsTable1': 1, 'dsShdslLineParamsTable2': 2, 'dsShdslLineParamsTable3': 3.
                     dsShdslMultiFrameMode 1.3.6.1.4.1.6296.9.6.1.1.3.1.23 integer read-write
This object specifies the multi frame operational mode of the transceiver. Enumeration: 'enable': 1, 'disable': 0.
                     dsShdslEnable4or6MbpsBitrate 1.3.6.1.4.1.6296.9.6.1.1.3.1.24 integer read-write
This object specifies the operational state of the 4_6Mbps bit rate. Enumeration: 'enable': 1, 'disable': 0.
                     dsShdslTomDataWord1 1.3.6.1.4.1.6296.9.6.1.1.3.1.25 integer read-write
This object identifies one of four words of proprietary vendor data, as described in the Vendor Data section of ITU-T G.994.1.bis.
                     dsShdslTomDataWord2 1.3.6.1.4.1.6296.9.6.1.1.3.1.26 integer read-write
This object identifies one of four words of proprietary vendor data, as described in the Vendor Data section of ITU-T G.994.1.bis.
                     dsShdslTomDataWord3 1.3.6.1.4.1.6296.9.6.1.1.3.1.27 integer read-write
This object identifies one of four words of proprietary vendor data, as described in the Vendor Data section of ITU-T G.994.1.bis.
                     dsShdslTomDataWord4 1.3.6.1.4.1.6296.9.6.1.1.3.1.28 integer read-write
This object identifies one of four words of proprietary vendor data, as described in the Vendor Data section of ITU-T G.994.1.bis.
                     dsShdslSetReqSilenceMode 1.3.6.1.4.1.6296.9.6.1.1.3.1.29 integer read-write
This object enables a silent mode for the STU at the opposite end of the loop for approximately one minute. During the silent period, the STU that requested the silent mode could perform whatever operations it wants and the STU at the opposite end will remain in handshake. Enumeration: 'enable': 4, 'disable': 0.
                     dsShdslSetIndividualRates1 1.3.6.1.4.1.6296.9.6.1.1.3.1.30 integer read-write
This item enables the user to individually enable or disable base rates for N=1 through N=16. The default is all rates enabled.
                     dsShdslSetIndividualRates2 1.3.6.1.4.1.6296.9.6.1.1.3.1.31 integer read-write
This item enables the user to individually enable or disable base rates for N=17 through N=32. The default is all rates enabled.
                     dsShdslSetIndividualRates3 1.3.6.1.4.1.6296.9.6.1.1.3.1.32 integer read-write
This item enables the user to individually enable or disable base rates for N=33 through N=36. The default is all rates enabled.
                     dsShdslSatmCellDelineation 1.3.6.1.4.1.6296.9.6.1.1.3.1.33 integer read-write
This object enables the user to enable or disable cell delineation for serial ATM operation. This parameter should be set before a startup. Enumeration: 'enable': 1, 'disable': 0.
                     dsShdslFramerCellDropOnError 1.3.6.1.4.1.6296.9.6.1.1.3.1.34 integer read-write
This object determines whether cells are dropped, i.e., not passed to the host, or not dropped, i.e., passed to the host. This object must be set prior to startup. Enumeration: 'enable': 1, 'disable': 0.
                     dsShdslGearShiftType 1.3.6.1.4.1.6296.9.6.1.1.3.1.35 integer read-write
This object specifies the Gear Shift Type. Enumeration: 'dsShdslLineParamsTable0': 0, 'dsShdslLineParamsTable1': 1.
                     dsShdslHsNsf 1.3.6.1.4.1.6296.9.6.1.1.3.1.36 integer read-write
This object enables or disables nonstandard Information fields for MP, MS, CL, and CLR messages, as defined in ITU-T G.994.1.bis. Enumeration: 'enable': 1, 'disable': 0.
                     dsShdslHsMaxBitsPerBaud 1.3.6.1.4.1.6296.9.6.1.1.3.1.37 integer read-write
This object specifies the maximum bit per baud. Enumeration: 'default': 3, 'dsShdslLineParamsTable1bits': 1, 'dsShdslLineParamsTable2bits': 2.
                     dsShdslHsCusId 1.3.6.1.4.1.6296.9.6.1.1.3.1.38 integer read-write
This object identifies the customer identification during handshaking, as described in ITU-T G.994.1.bis.
                     dsShdslHsCusData0 1.3.6.1.4.1.6296.9.6.1.1.3.1.39 integer read-write
This object identifies two words of customer data during handshaking, as defined in ITU-T G.994.1.bis.
                     dsShdslHsCusData1 1.3.6.1.4.1.6296.9.6.1.1.3.1.40 integer read-write
This object identifies two words of customer data during handshaking, as defined in ITU-T G.994.1.bis.
                     dsShdslHsAnnexBType 1.3.6.1.4.1.6296.9.6.1.1.3.1.41 integer read-write
This object allows the customer to choose between support for Annex B, Annex B with Access Network Frequency Plan (ANFP), or both. Enumeration: 'default': 1, 'annexbOrAnfp': 3, 'anfp': 2.
                     dsShdslAutoRetrain 1.3.6.1.4.1.6296.9.6.1.1.3.1.42 integer read-write
Enables or disables auto-retrain. Enumeration: 'enable': 1, 'disable': 0.
                     dsShdslArCrcCheck 1.3.6.1.4.1.6296.9.6.1.1.3.1.43 integer read-write
Enables or disables auto-retrain based on CRC errors. Enumeration: 'enable': 1, 'disable': 0.
                     dsShdslArFramerSyncCheck 1.3.6.1.4.1.6296.9.6.1.1.3.1.44 integer read-write
Enables or disables auto-retrain based on framer synchronization. Enumeration: 'enable': 1, 'disable': 0.
                     dsShdslArSnrMarginCheck 1.3.6.1.4.1.6296.9.6.1.1.3.1.45 integer read-write
Enables or disables auto-retrain based on whether the S/N margin falls below a preset threshold. Enumeration: 'enable': 1, 'disable': 0.
                     dsShdslArCrcThreshold 1.3.6.1.4.1.6296.9.6.1.1.3.1.46 integer read-write
Sets the threshold for the number of frames with CRC errors for autoretrain.
                     dsShdslArSnrMarginThreshold 1.3.6.1.4.1.6296.9.6.1.1.3.1.47 integer read-write
Set the margin threshold for autoretrain. Enumeration: 'dsShdslLineParamsTable4': 4, 'dsShdslLineParamsTable5': 5, 'dsShdslLineParamsTable6': 6, 'dsShdslLineParamsTable1': 1, 'dsShdslLineParamsTable2': 2, 'dsShdslLineParamsTable3': 3.
                     dsShdslArRetrainTime 1.3.6.1.4.1.6296.9.6.1.1.3.1.48 integer read-write
Sets the time over which the autoretrain parameters must be outside their normal ranges, so that an auto-retrain occurs. Enumeration: 'dsShdslLineParamsTable10': 10, 'dsShdslLineParamsTable4': 4, 'dsShdslLineParamsTable5': 5, 'dsShdslLineParamsTable6': 6, 'dsShdslLineParamsTable7': 7, 'dsShdslLineParamsTable1': 1, 'dsShdslLineParamsTable2': 2, 'dsShdslLineParamsTable3': 3, 'dsShdslLineParamsTable8': 8, 'dsShdslLineParamsTable9': 9.
                     dsShdslOpStateTrapEnable 1.3.6.1.4.1.6296.9.6.1.1.3.1.49 integer read-write
Enables/disables trap indicating a change in op state. Enumeration: 'enable': 1, 'disable': 2.
                     dsShdslTxFrmrDataClkEdge 1.3.6.1.4.1.6296.9.6.1.1.3.1.50 integer read-write
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, transmit data can be sampled upon either rising or falling edge of the transmit clock. Enumeration: 'positive': 1, 'negative': 0.
                     dsShdslRxFrmrDataClkEdge 1.3.6.1.4.1.6296.9.6.1.1.3.1.51 integer read-write
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, receive data can be valid upon either rising or falling edge of the receive clock. Enumeration: 'positive': 1, 'negative': 0.
                     dsShdslTxFrmrPulseClkEdge 1.3.6.1.4.1.6296.9.6.1.1.3.1.52 integer read-write
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, the transmit frame pulse can be active upon either rising or falling edge. Enumeration: 'positive': 1, 'negative': 0.
                     dsShdslRxFrmrPulseClkEdge 1.3.6.1.4.1.6296.9.6.1.1.3.1.53 integer read-write
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, the transmit frame pulse can be active upon either rising or falling edge. Enumeration: 'positive': 1, 'negative': 0.
                     dsShdslTxFrmrPulseLvl 1.3.6.1.4.1.6296.9.6.1.1.3.1.54 integer read-write
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, the transmit frame pulse can be either active high (1) or active low (0). Enumeration: 'high': 1, 'low': 0.
                     dsShdslRxFrmrPulseLvl 1.3.6.1.4.1.6296.9.6.1.1.3.1.55 integer read-write
This parameter is for Serial ATM applications only. It is recommended that the default value be used. For special customer configurations, the transmit frame pulse can be either active high (1) or active low (0). Enumeration: 'high': 1, 'low': 0.
                     dsShdslUtopiaDataBusWidth 1.3.6.1.4.1.6296.9.6.1.1.3.1.56 integer read-only
This parameter is used to specify width of UTOPIA data bus. Enumeration: 'tx8Rx8': 0, 'tx8Rx16': 3, 'tx16Rx8': 2, 'tx16Rx16': 1.
                     dsShdslFrmrOH 1.3.6.1.4.1.6296.9.6.1.1.3.1.57 integer read-write
This object specifies framer OverHead Channel.
                     dsShdslLoopAttenCrossingTrapEnable 1.3.6.1.4.1.6296.9.6.1.1.3.1.58 integer read-write
This Parameter enables or disables the Trap for Loop Attenuation Threshold crossing. Enumeration: 'enable': 1, 'disable': 2.
                     dsShdslSNRMarginCrossingTrapEnable 1.3.6.1.4.1.6296.9.6.1.1.3.1.59 integer read-write
This Parameter enables or disables the Trap for SNR Margin Threshold crossing. Enumeration: 'enable': 1, 'disable': 2.
                     dsShdslFramerOHAndDefectsTrapEnable 1.3.6.1.4.1.6296.9.6.1.1.3.1.60 integer read-write
This Parameter enables or disables the Trap for Framer Overhead and Defects. Enumeration: 'enable': 1, 'disable': 2.
                     dsShdslParametricTestInputFile 1.3.6.1.4.1.6296.9.6.1.1.3.1.61 displaystring read-write
Indicates Name of the Input file from which to take the Mask Array Size, lower and upper mask Array. Null string means no file is specified.
                     dsShdslParamHybridLossTestStart 1.3.6.1.4.1.6296.9.6.1.1.3.1.62 integer read-write
Indicates Start bin for range of bins to be measured. The default value mentioned is an indicative value only, for exact value refer to document number DO-400523-AN and DO-401163-AN.
                     dsShdslParamHybridLossTestEnd 1.3.6.1.4.1.6296.9.6.1.1.3.1.63 integer read-write
Indicates End bin for range of bins to be measured. The default value mentioned is an indicative value only.
             dsShdslSpanStatusExtnTable 1.3.6.1.4.1.6296.9.6.1.1.4 no-access
This table is a proprietary extension of hdsl2ShdslSpanStatusTable
                 dsShdslSpanStatusExtnEntry 1.3.6.1.4.1.6296.9.6.1.1.4.1 no-access
An entry (conceptual row) in the dsShdslSpanStatusExtnTable. The Table is indexed by ifIndex.
                     dsShdslStatusPMMSMaxLineRate 1.3.6.1.4.1.6296.9.6.1.1.4.1.1 unsigned32 read-only
This object provides the maximum PMMS rate the line is capable of achieving
                     dsShdslStatus4WireHsMode 1.3.6.1.4.1.6296.9.6.1.1.4.1.2 integer read-only
Contains the current 4 Wire Handshake Mode Configured Enumeration: 'enhanced': 1, 'standard': 0.