DASAN-ADSL-MIB: View SNMP OID List / Download MIB

The MIB module to describe ADSL product. The MIB module that provides objects that are proprietary and extension to ADSL- LINE-MIB. The MIB include extension to following Tables. 1.) adslLineTable 2.) adslAtucPhysTable 3.) adslAturPhysTable 4.) adslAtucChanTable 5.) adslAturChanTable 6.) adslAtucPerfDataTable --7.) adslAturPerfDataTable 8.) adslAtucIntervalTable --9.) adslAturIntervalTable 10.) adslAtucChanPerfDataTable 11.) adslAturChanPerfDataTable 12.) adslAtucChanIntervalTable 13.) adslAturChanIntervalTable 14.) adslLineConfProfileTable 15.) adslLineAlarmConfProfileTable The MIB also include a set of scalar(s) clubbed under the group 'dsAdslCapabilityGroup'.

This object identifies the firmware to be downloaded. Enumeration: 'adsl': 1, 'shdsl': 3, 'sdsl': 2.

This object indicates ADSL line code type. Enumeration: 'qam': 4, 'cap': 3, 'other': 1, 'dmt': 2.

This object indicates transmission capabilities with which the DSL system is configured. Bits: 'q9922TcmIsdnOverlapped': 11, 'q9921TcmIsdnNonOverlapped': 6, 'q9921IsdnNonOverlapped': 4, 'q9921IsdnOverlapped': 5, 'q9921TcmIsdnSymmetric': 12, 'etsi': 1, 'ansit1413': 0, 'q9922TcmIsdnNonOverlapped': 10, 'q9922PotsNonOverlapped': 8, 'q9921TcmIsdnOverlapped': 7, 'q9921PotsOverlapped': 3, 'q9922PotsOverlapped': 9, 'q9921PotsNonOverlapped': 2.

This bitmap specifies which all transmission modes, which the ATU-C is capable of supporting. Right now support for Annex A (q9921PotsNonOverlapped(2) and q9921PotsOverlapped(3)) is present. This value depends on the DSL PHY firmware present on Columbia MND Bits: 'adslPlusPotsNonOverlapped': 13, 'q9922TcmIsdnNonOverlapped': 10, 'q9923Adsl2PotsNonOverlapped': 28, 'q9921IsdnNonOverlapped': 4, 'adslPlusPotsOverlapped': 18, 'q9922TcmIsdnOverlapped': 11, 'q9921GspanPlusPotsNonOverlapped': 31, 'q9925Adsl2PlusPotsNonOverlapped': 26, 'q9923Readsl2PotsOverlapped': 22, 'q9922PotsOverlapped': 9, 'q9923Adsl2PotsOverlapped': 29, 'q9921TcmIsdnNonOverlapped': 6, 'etsi': 1, 'ansit1413': 0, 'q9922PotsNonOverlapped': 8, 'q9925Adsl2PlusPotsOverlapped': 27, 'q9921PotsOverlapped': 3, 'q9923Readsl2PotsNonOverlapped': 23, 'q9921GspanPlusPotsOverlapped': 30, 'q9921TcmIsdnSymmetric': 12, 'q9921IsdnOverlapped': 5, 'q9921TcmIsdnOverlapped': 7, 'q9921PotsNonOverlapped': 2.

This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. This Table is an extension to adslLineTable defined in rfc-2662.

An entry (conceptual row) in the dsAdslLineExtnTable. The Table is indexed by ifIndex.

this object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests. Enumeration: 'spectrumMedley': 26, 'spectrumPilot': 27, 'spectrumRMtpr': 32, 'analogLb': 6, 'spectrumCMtpr': 30, 'atmLp': 10, 'rcvLinearityTest': 34, 'startup': 0, 'idleNoisePerBinTest': 37, 'totalIdleNoiseTest': 38, 'shutdown': 101, 'selt': 4134, 'wakeup': 102, 'rcvFilterTest': 35, 'spectrumReverb': 5, 'hybridLossTest': 33, 'rcvPowerPerBinTest': 36, 'digitalLb': 7.

This object indicates UTOPIA Level 2 Rx address for a line.

This object indicates UTOPIA Level 2 Tx address for a line.

The transmission modes that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment. REFERENCE Section 7.3.2 ITU G.997.1. Bits: 'q9921isdnOverlapped': 5, 'q9921tcmIsdnSymmetric': 12, 'adslPlusPotsNonOverlapped': 13, 'vdslNonOverlapped': 25, 'q9922potsOverlapped': 9, 'q9921tcmIsdnNonOverlapped': 6, 'q9923Adsl2PotsNonOverlapped': 28, 'q9921IsdnNonOverlapped': 4, 'adslPlusPotsOverlapped': 18, 'q9921GspanPlusPotsNonOverlapped': 31, 'q9925Adsl2PlusPotsNonOverlapped': 26, 'q9923Readsl2PotsOverlapped': 22, 'q9922potsNonOverlapeed': 8, 'q9923Adsl2PotsOverlapped': 29, 'q9922tcmIsdnOverlapped': 11, 'etsi': 1, 'ansit1413': 0, 'q9925Adsl2PlusPotsOverlapped': 27, 'q9921PotsOverlapped': 3, 'q9923Readsl2PotsNonOverlapped': 23, 'vdslOverlapped': 24, 'q9921GspanPlusPotsOverlapped': 30, 'q9922tcmIsdnNonOverlapped': 10, 'q9921tcmIsdnOverlapped': 7, 'q9921PotsNonOverlapped': 2.

The transmission mode of the ATU-C. This object returns if there is no mode currently known. The initialization with the ATU-R will determine the mode used. REFERENCE Section 7.3.2 ITU G.997.1. Bits: 'q9921tcmIsdnNonOverlapped': 6, 'q9922potsNonOverlapeed': 8, 'q9921IsdnNonOverlapped': 4, 'q9922tcmIsdnOverlapped': 11, 'q9921isdnOverlapped': 5, 'q9921tcmIsdnSymmetric': 12, 'etsi': 1, 'ansit1413': 0, 'adslPlusPotsNonOverlapped': 13, 'q9922tcmIsdnNonOverlapped': 10, 'q9921tcmIsdnOverlapped': 7, 'q9921PotsOverlapped': 3, 'q9922potsOverlapped': 9, 'q9921PotsNonOverlapped': 2.

This object indicates parameter to set use of either crystal or oscillator. Enumeration: 'crystal': 4, 'oscillator': 0.

Parameter that indicates whether trellis coding has been enabled or disabled. Trellis coding should always be enabled for its clear performance advantage. Enumeration: 'trellisOn': 1, 'trellisOff': 2.

This table provides one row for each ATUC. This table is an extention to adslAtucPhysTable defined in rfc-2662.

An entry (conceptual row) in the dsAdslAtucPhysExtnTable. The Table is indexed by ifIndex.

This object indicates the operational state of the ATU. Values include idle,handshake, training, etc. Enumeration: 'llTest': 128, 'deltTraining': 139, 'framerSync': 26, 'training': 24, 'txTest': 132, 'idle': 0, 'handshake': 16, 'delt': 140, 'atmLpTest': 133, 'bootupLoad': 8, 'dlTest': 131, 'data': 1, 'fastRetrainInProg': 27, 'discovery': 46.

This object provides actual ATU-C configuration based on outcome of negotiation with ATU-R. In this case, the parameter provides actual standard used for the connection. Enumeration: 'adsl2Plus': 27, 't1413auto': 9, 'adsl2PlusAuto': 30, 'alctl14': 3, 'adsl2Auto': 29, 'gspanPlus': 64, 't1413': 0, 'adsl2': 26, 'adslPlus': 48, 'alctl': 6, 'reAdsl2': 28, 'gLite': 1, 'multimode': 4, 'gDmt': 2, 'adi': 5.

This object indicates the No. of bit errors detected during BERT.

This object Provides transmit ATM cell counter.

This object Provides receive ATM cell counter.

This object provides current detailed start up information to be used for debugging.

Number of bit errors.

Number of idle cells.

Indicates if the Signal is in Sync or not. Enumeration: 'bertOutOfSync': 0, 'bertInSync': 128.

Indicates the Result of the Parametric Test conducted on the Xcvr. Enumeration: 'fail': 1, 'dspIfFail': 2, 'ok': 0.

This object indicates whether DataBoost is utilized for the connection. Enumeration: 'disabled': 0, 'enabled': 32768.

This object indicates the Parametric Test Array. Every Four octects refer to one element in this array of octets.

The near-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state. (Not available for ADSL).

The near-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the near-end. (Not available for ADSL).

DELT-related parameter that provides the scale factor to be applied to the upstream Hlin(f) values.(Not available for ADSL and ADSL2plus).

DELT-related parameter that provides an array of complex upstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.

DELT-related parameter that provides the number of symbols used to measure the upstream Hlog(f).(Not available for ADSL and ADSL2plus).

DELT-related parameter that provides an array of real upstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.

DELT-related parameter that provides the number of symbols used to measure the upstream QLN(f) values. (Not available for ADSL and ADSL2plus).

DELT-related parameter that provides an array of real upstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octets refer to one element in this array of octets.

DELT-related parameter that provides last successful transmitted initialization state by the ATU-C. (Not available for ADSL and ADSL2plus). Enumeration: 'dmtatucshowtime': 32, 'dmtatucquiet1': 1, 'dmtatucquiet3': 7, 'dmtatucquiet2': 3, 'dmtatucquiet4': 12, 'dmtatuclineprob': 6, 'dmtatucreverb6': 27, 'dmtatucreverb7': 30, 'dmtatucreverb4': 19, 'dmtatucreverb5': 22, 'dmtatuccomb1': 2, 'dmtatucmsgfmt': 10, 'dmtatuccomb3': 8, 'dmtatuccomb2': 4, 'dmtatucsegue2': 23, 'dmtatucsegue3': 28, 'dmtatucsegue1': 20, 'dmtatucmsg2': 26, 'dmtatucsegue4': 31, 'dmtatucmsg1': 21, 'dmtatuctref1': 14, 'dmtatuctref2': 18, 'dmtatucexchmarker': 25, 'dmtatucmsgpcb': 11, 'dmtatucg9941': 0, 'dmtatucparams': 29, 'dmtatucreverb2': 15, 'dmtatucreverb3': 17, 'dmtatucect': 16, 'dmtatucmedley': 24, 'dmtatucreverb1': 13, 'dmtatucicomb2': 9, 'dmtatucicomb1': 5.

Line Power Management State. (Not available for ADSL). Enumeration: 'idleop': 0, 'dataop': 1, 'l2op': 141.

The near-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATU-R) interface. (Not available for ADSL).

GlobespanVirata parameter that indicates whether an extended or the standard upstream PSD is used - for G.Span Plus mode of operation only. Only supported for G.Span Plus, therefore this parameter is not valid for ADSL2/ADSL2plus modes of operation. Enumeration: 'jj100': 1, 'extended': 32768, 'standard': 0.

GlobespanVirata parameter that indicates the DSP version number.

GlobespanVirata parameter that indicates the Pilot Tone Index.

Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet.

GlobespanVirata parameter that indicates the actual Psd Mask currently being used. Enumeration: 'hsadslM2': 4, 'hsadslM1': 3, 'flatMskRfi': 32771, 'coMsk2Rfi0': 49152, 'msk2Rfi': 32768, 'cabMsk2Rfi': 32772, 'adsl': 0.

This table is an extention to adslAtucPhysTable defined in rfc-2662. This table provides one row for each ATUR. Each row contains the Physical Layer Parameters table for that ATUR.

An entry (conceptual row) in the dsAdslAturPhysExtnTable. The Table is indexed by IfIndex.

This object provides the upstream and downstream ATU-R configuration data (EOC - read 5 sec after data mode).

The far-end delineated total cell count performance parameter is a count of the total number of cells passed through the cell delineation and HEC function process operating on the ATM Data Path while in the SYNC state.(Not available for ADSL).

The far-end user total cell count performance parameter is a count of the total number of cells in the ATM Data Path delivered at the V-C (for ATU-C) or T-R (for ATUR) interface. (Not available for ADSL).

The far-end idle bit error count performance parameter is a count of the number of bit errors in the idle cell payload received in the ATM Data Path at the far-end. (Not available for ADSL).

DELT-related parameter that provides the scale factor to be applied to the downstream Hlin(f) values.(Not available for ADSL and ADSL2plus).

DELT-related parameter that provides an array of complex downstream Hlin(f) values in linear scale. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets.

DELT-related parameter that provides the number of symbols used to measure the downstream Hlog(f). (Not available for ADSL and ADSL2plus).

DELT-related parameter that provides an array of real downstream Hlog(f) values in dB. (Not available for ADSL and ADSL2plus).

DELT-related parameter that provides the number of symbols used to measure the downstream QLN(f) values. (Not available for ADSL and ADSL2plus).

DELT-related parameter that provides an array of real downstream QLN(f) values in dB. (Not available for ADSL and ADSL2plus). Every two octects refer to one element in this array of octets.

DELT-related parameter that provides last successful transmitted initialization state by the ATU-R. (Not available for ADSL and ADSL2plus). Enumeration: 'dmtaturreverb1': 12, 'dmtaturreverb3': 16, 'dmtaturreverb2': 14, 'dmtaturicomb2': 9, 'dmtaturreverb4': 18, 'dmtaturreverb7': 29, 'dmtaturicomb1': 5, 'dmtaturect': 17, 'dmtaturlineprob': 6, 'dmtaturmsg2': 25, 'dmtaturmsg1': 22, 'dmtaturg9941': 0, 'dmtaturreverb5': 20, 'dmtatursegue4': 30, 'dmtatursegue3': 27, 'dmtatursegue2': 21, 'dmtatursegue1': 19, 'dmtaturreverb6': 26, 'dmtaturmsgfmt': 10, 'dmtaturquiet1': 1, 'dmtaturquiet2': 3, 'dmtaturquiet3': 7, 'dmtaturquiet4': 13, 'dmtaturquiet5': 15, 'dmtaturmedley': 23, 'dmtaturshowtime': 31, 'dmtaturexchmarker': 24, 'dmtaturparams': 28, 'dmtaturcomb2': 4, 'dmtaturcomb3': 8, 'dmtaturmsgpcb': 11, 'dmtaturcomb1': 2.

Indicates the Overhead Channel. This feature is not supported by DSLPHY as yet.

This table provides one row for each ATUC channel. This Table is an extention to adslAtucChanTable defined in rfc 2662.

An entry (conceptual row) in the dsAdslAtucChanExtnTable. The Table is indexed by ifIndex.

indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be 'NoAtmDefect'. Enumeration: 'noCellDelineation': 1, 'lossOfCellDelineation': 2, 'noAtmDefect': 0.

Indicates number of DMT symbols per Reed-Solomon code word (S) in the downstream direction. Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.

Indicates interleaving depth (D) in the downstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.

Indicates number of redundant bytes (R) per Reed-Solomon code in the downstream direction.

This table is extention to adslAturChanTable defined in rfc-2662. This table provides one row for each ATUR channel. ADSL channel interfaces are those Interface Table entries where ifType is equal to adslInterleave(124) or adslFast(125).

An entry (conceptual row) in the dsAdslAturChanExtnTable. The Table is indexed by IfIndex.

This object indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be NoAtmDefect. Enumeration: 'noCellDelineation': 1, 'lossOfCellDelineation': 2, 'noAtmDefect': 0.

This object indicates number of DMT symbols per Reed- Solomon code word (S) in the upstream direction Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.

This object indicates interleaving depth (D) in the upstream direction Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.

This object indicates number of redundant bytes (R) per Reed-Solomon code in the upstream direction.

This table provides one row for each ATUC. This table is extention to adslAtucPerfDataTable defined in rfc-2662.

An entry (conceptual row) in the dsAdslAtucPerfDataExtnTable. The Table is indexed by ifIndex.

The value of this object indicates the count of fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1

The value of this object indicates the count of failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2

The value of this object indicates the count of severely errored second line. REFERENCE ITU G.997.1 Section 7.2.1.1.7

The value of this object indicates the count of unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9

Count of seconds in the current 15 minute interval when there was fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1

Count of seconds in the current 15 minute interval when there was failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2

Count of seconds in the current 15 minute interval when there was severely errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.7

Count of seconds in the current 15 minute interval when there was count for unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9

Count of the number of seconds when there was fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed. REFERENCE ITU G.997.1 Section 7.4.15.1

Count of the number of seconds when there was failed fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed.REFERENCE ITU G.997.1 Section 7.4.15.2

Count of the number of seconds when there was Severely Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.7

Count of the number of seconds when there was Unavailable Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.9

Count of seconds in the interval when there was fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.1

Count of seconds in the interval when there was failed fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.2

Count of seconds in the interval when there was severely errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.7

Count of seconds in the interval when there was unavailable errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.9

Total elapsed seconds in this interval in seconds.

Count of 1-second intervals with one or more forward error correction (FEC) anomalies since agent reset (Not available for ADSL).

Count of 1-second intervals, in the current 15 minute interval, with one or more forward error correction (FEC) anomalies (Not available for ADSL).

NCount of 1-second intervals, during the current day as measured by adslAtucPerfCurr1Day-TimeElapsed, with one or moreforward error correction (FEC) anomalies (Not available for ADSL).

Count of 1-second intervals, within the most recent previous 1-day period, with one or more forward error correction (FEC) anomalies (Not available for ADSL).

Count of 1-second intervals containing one or more loss of signal (LOS) defects (Not available for ADSL).

.

.

.

This table provides one row for each ATU-R. ADSL physical interfaces are those Interface Table Entries where ifType is equal to adsl(94). This table is an extn to 'adslAturPerfDataExtTable' which is part of ADSL-LINE-EXT-MIB (rfc 3440).

An entry (conceptual row) in the dsAdslAturPerfDataExtnTable. The Table is indexed by ifIndex.

.

.

.

.

.

.

.

.

Count of 1-second intervals with one or more far end forward error correction (FFEC) anomalies since agent reset (Not available for ADSL).

Count of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL).

Count of 1-second intervals, during the current day as measured by adslAturPerfCurr1Day-TimeElapsed, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL).

Count of 1-second intervals, within the most recent previous 1-day period, with one or more far end forward error correction (FFEC) anomalies (Not available for ADSL).

Count of 1-second intervals containing one or more far end loss of signal (LOS) defects (Not available for ADSL).

.

.

.

This table provides one row for each ATUC performance data collection interval. This Table is an extention to adslAtucIntervalTable defined in rfc 2662.

An entry (conceptual row) in the dsAdslAtucIntervalExtnTable. The Table is indexed by ifIndex and adslAtucIntervalNumber.

This variable indicates Count of seconds in the interval when there was Fast Retrains.

This variable indicates Count of seconds in the interval when there was Failed Fast Retrains.

This variable indicates Count of seconds in the interval when there was severely errored seconds.

This variable indicates Count of seconds in the interval when there was unavailable errored seconds.

This variable indicates the total Elapsed time in this interval.

This table provides one row for each ATUC channel. This table is an extention to adslAtucChanPerfDataTable.

An entry (conceptual row) in the dsAdslAtucChanPerfDataExtnTable. The Table is indexed by ifIndex.

Total elapsed seconds in this interval.

Count of no cell delineation(ncd) on this channel.

Count of out of cell delineation (ocd) on this channel.

Header error check counter(hec) on this channel.

Count of no cell delineation(ncd) on this channel within the current 15 minute time interval.

Count of out of cell delineation (ocd) on this channel within the current 15 minute time interval.

Header error check counter(hec) on this channel within the current 15 minute time interval.

Count of no cell delineation (ncd) on this channel within the current 1 day time interval.

Count of out of cell delineation (ocd) on this channel within the current 1 day time interval.

Header error check counter (hec) on this channel within the current 1 day time interval.

Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period.

Count of out of cell delineation (ocd) on this channel within the most recent previous 1-day period.

Header error check counter(hec) on this channel within the most recent previous 1-day period.

This table is extention to adslAturChanPerfDataTable defined in rfc-2662. This table contains the Performance Data for that ATU-R channel (fast or interleaved).

An entry (conceptual row) in the dsAdslAturChanPerfDataExtnTable. The Table is indexed by IfIndex.

Number of packets with no cell delineation(NCD) error on this channel.

Number of packets with Header error check (HEC) error on this channel.

Number of packets with no cell delineation(NCD) error on this channel within the current 15 minute time interval.

Number of packets with Header error check (HEC) error on this channel within the current 15 minute time interval.

Number of packets with no cell delineation (NCD) error on this channel within the current 1 day time interval.

Number of packets with Header error check (HEC) error on this channel within the current 1 day time interval.

Number of packets with no cell delineation (NCD) error on this channel within the most recent previous period.

Number of packets with Header error check (HEC) error on this channel within the most recent previous period.

This table provides a row for each ATUC channel's performance data collection interval. This table is an extension to adslAtucChanIntervalTable defined in rfc 2662.

An entry (conceptual row) in the dsAdslAtucChanIntervalExtnTable. The Table is indexed by ifIndex and adslAtucChanIntervalNumber.

Total time elapsed (in seconds) in this interval.

Indicates count of no cell delineation on this channel for this interval.

Indicates count of out cell delineation on this channel for this interval.

Indicates Header error check counter on this channel during this interval.

This table is extention to adslAturChanIntervalTable defined in rfc-2662. This table provides one row for each ATUR channel's performance data collection interval.

An entry (conceptual row) in the dsAdslAturChanIntervalExtnTable. The Table is indexed by IfIndex and dsAdslAturChanIntervalExtnNumber.

Indicates count of no cell delineation on this channel for this interval.

Indicates Header error check counter on this channel during this interval.

This table contains information on the ADSL line configuration. This Table is an extension to adslLineConfProfileTable.

An entry (conceptual row) in the dsAdslLineConfProfileExtnTable. The Table is indexed by adslLineConfProfileName.

This object is used by the line configuration table in order to identify a row of this table.

Sets the correction time for the upstream-interleaved buffer. RS can also be disabled. The Default Value for ADSL+ is 3. Enumeration: 'dsAdslLineConfProfileExtnTable2ms': 7, 'dsAdslLineConfProfileExtnTable125us': 3, 'disable': 15, 'dsAdslLineConfProfileExtnTable500us': 5, 'dsAdslLineConfProfileExtnTable250us': 4, 'dsAdslLineConfProfileExtnTable4ms': 8, 'dsAdslLineConfProfileExtnTable1ms': 6.

This object is used to configure the ADSL physical line mode. Enumeration: 'fastOnly': 2, 'fastOrInterleaved': 4, 'noChannel': 1, 'interleavedOnly': 3, 'fastAndInterleaved': 5.

Highest bin number allowed for Tx signal. The Range & default for ADSL+ is 0x06 - 0x1ff and 0x1ff respectively.

Lowest bin number allowed for Tx signal.The Range for ADSL+ is 0x06 - 0x1ff. The Default for Annex B is 0x40 respectively.

Lowest bin number allowed for Rx signal. The Range for ADSL+ is 0x01 - 0x1ff. The default for Annex B is 0x01.

Highest bin number allowed for Rx signal. The Range and default value for ADSL+ is 0x01 - 0x1ff and 0x1d respectively.

Employs Rx Start/End bin settings. Enumeration: 'disable': 0.

Preferred standard compliance. Outcome is dependent upon standard support of the remote unit.GlobespanVirata High Speed ADSL DMT (ADSL+) applications only. Enumeration: 'adsl2Plus': 27, 't1413Auto': 9, 'adsl2PlusAuto': 30, 'alctl14': 3, 'adsl2Auto': 29, 'gspanPlus': 49, 't1413': 0, 'adsl2': 26, 'adslPlus': 48, 'alctl': 6, 'readsl2': 28, 'gLite': 1, 'multimode': 4, 'gDmt': 2, 'adi': 5.

Specifies value of Tx power attenuation. Enumeration: 'dsAdslLineConfProfileExtnTable36': 32804, 'dsAdslLineConfProfileExtnTable19': 32787, 'dsAdslLineConfProfileExtnTable6': 6, 'dsAdslLineConfProfileExtnTable7': 7, 'dsAdslLineConfProfileExtnTable4': 4, 'dsAdslLineConfProfileExtnTable5': 5, 'dsAdslLineConfProfileExtnTable2': 2, 'dsAdslLineConfProfileExtnTable3': 3, 'dsAdslLineConfProfileExtnTable0': 0, 'dsAdslLineConfProfileExtnTable1': 1, 'dsAdslLineConfProfileExtnTable37': 32805, 'dsAdslLineConfProfileExtnTable8': 8, 'dsAdslLineConfProfileExtnTable9': 9, 'dsAdslLineConfProfileExtnTable18': 32786, 'point1': 13, 'point2': 14, 'point3': 15, 'point4': 16, 'point5': 17, 'point6': 18, 'point7': 19, 'point8': 20, 'dsAdslLineConfProfileExtnTable11': 11, 'dsAdslLineConfProfileExtnTable12': 12, 'dsAdslLineConfProfileExtnTable13': 32781, 'dsAdslLineConfProfileExtnTable14': 32782, 'dsAdslLineConfProfileExtnTable15': 32783, 'dsAdslLineConfProfileExtnTable16': 32784, 'dsAdslLineConfProfileExtnTable17': 32785, 'dsAdslLineConfProfileExtnTable38': 32806, 'dsAdslLineConfProfileExtnTable39': 32807, 'dsAdslLineConfProfileExtnTable10': 10, 'dsAdslLineConfProfileExtnTable35': 32803, 'point9': 21, 'dsAdslLineConfProfileExtnTable34': 32802, 'dsAdslLineConfProfileExtnTable21': 32789, 'dsAdslLineConfProfileExtnTable20': 32788, 'dsAdslLineConfProfileExtnTable23': 32791, 'dsAdslLineConfProfileExtnTable22': 32790, 'dsAdslLineConfProfileExtnTable25': 32793, 'dsAdslLineConfProfileExtnTable24': 32792, 'dsAdslLineConfProfileExtnTable27': 32795, 'dsAdslLineConfProfileExtnTable26': 32794, 'dsAdslLineConfProfileExtnTable29': 32797, 'dsAdslLineConfProfileExtnTable28': 32796, 'dsAdslLineConfProfileExtnTable40': 32808, 'dsAdslLineConfProfileExtnTable33': 32801, 'dsAdslLineConfProfileExtnTable30': 32798, 'dsAdslLineConfProfileExtnTable31': 32799, 'dsAdslLineConfProfileExtnTable32': 32800.

Sets the percentage overhead for the downstream-fast buffer. Enumeration: 'dsAdslLineConfProfileExtnTable6': 4, 'dsAdslLineConfProfileExtnTable25': 2, 'dsAdslLineConfProfileExtnTable3': 5, 'dsAdslLineConfProfileExtnTable1': 7, 'disable': 15, 'dsAdslLineConfProfileExtnTable50': 1, 'dsAdslLineConfProfileExtnTable12': 3.

This parameter sets the correction time for the downstream interleaved buffer.RS can also be disabled. Enumeration: 'dsAdslLineConfProfileExtnTable250Us': 4, 'dsAdslLineConfProfileExtnTable2Ms': 7, 'dsAdslLineConfProfileExtnTable125Us': 3, 'disable': 15, 'dsAdslLineConfProfileExtnTable500Us': 5, 'dsAdslLineConfProfileExtnTable4Ms': 8, 'dsAdslLineConfProfileExtnTable1Ms': 6.

Sets the 4576014verhead for the upstream-fast buffer. Enumeration: 'dsAdslLineConfProfileExtnTable6': 4, 'dsAdslLineConfProfileExtnTable25': 2, 'dsAdslLineConfProfileExtnTable3': 5, 'dsAdslLineConfProfileExtnTable1': 7, 'disable': 15, 'dsAdslLineConfProfileExtnTable50': 1, 'dsAdslLineConfProfileExtnTable12': 3.

This parameter is set as per annex compliance of the code release. GlobespanVirata High Speed ADSL DMT (ADSL+) applications only. Enumeration: 'annexA': 0, 'annexB': 1, 'annexADSL2': 5, 'highSpeed': 2.

This object is used to indicate Maximum interleaving depth supported by the customer's hardware. Enumeration: 'dsAdslLineConfProfileExtnTable64': 0, 'dsAdslLineConfProfileExtnTable256': 8192, 'dsAdslLineConfProfileExtnTable128': 4096.

Controls if the CO will attempt to startup using alternate standards if the CPE does not support ADSL+. Enumeration: 'annexa': 1, 'annexb': 2, 'disable': 0, 'adslplus': 16.

Selects the PSD mask option to be used. Enumeration: 'hsadslM2': 4, 'adsl2NonovlpM1': 275, 'hsadslM1': 3, 'adls2NonovlpFlat': 259, 'flatMskRfi': 32771, 'msk2Rfi': 32768, 'coMsk2Rfio': 49152, 'cabMsk2Rfi': 32772, 'adsl': 0, 'adls2NonovlpM2': 291.

Selects if there is overlap or no overlap of bins. Enumeration: 'fdmMode': 2, 'ecMode': 1.

This object sets the upstream PSD to be either extended or standard. Used for GSpan Plus only. Enumeration: 'jj100': 1, 'extended': 32768, 'standard': 0.

PM-related parameter used by the ATU-C to set the allowed link states. Bits: 'pmstatel2enable': 1, 'pmstatel3enable': 0.

PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an exit from the L2 state and the next entry into the L2 state.

PM configuration parameter, related to the L2 low power state. This parameter represents the minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State.

PM configuration parameter, related to the L2 low power state. This parameter represents the maximum aggregate transmit power reduction (in dB) that can be performed through a single Power Trim in the L2 state.

PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum net data rate during the low power state (L2). The data rate is coded in bit/s.

Parameter used to specify the minimum impulse noise protection for the downstream bearer channel.

PM configuration parameter, related to the L2 low power state. This parameter specifies the downstream data rate threshold that triggers autonomous entry into low power state (L2). The data rate is coded in bit/s, and must be less than or equal to the value of GSMIB_adslAtucConfGsPML2Exit ThresholdRate.

PM configuration parameter, related to the L2 low power state. This parameter specifies the downstream data rate threshold that triggers autonomous exit from low power state (L2). The data rate is coded in bit/s, and must be less than the value of GSMIB_adslAtucConfPML2MinRate.

PM configuration parameter, related to the L2 low power state. This parameter specifies the minimum interval of time that the net data rate for the bearer channel should stay below GSMIB_adslAtucConfGsPML2EntryThresholdRate before autonomous entry into low power state (L2). The minimum entry rate time is coded in seconds, and can range from 900 to 65535.

This table contains information on the ADSL line configuration. This table is an extention to adslLineAlarmConfProfileExtnTable defined in rfc 2662.

An entry (conceptual row) in the dsAdslLineAlarmConfProfileExtnTable. The Table is indexed by adslLineAlarmConfProfileName.

This object is used by the line alarm configuration Extn table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user specified. Also, the system will always provide a default profile whose name is `DEND

The number of failed retrains encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agent to send an adslAtucFailedFastRTrap.

The number of Severe errored seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP to send an adslAtucSesLTrap.

The first time the value of the corresponding instance of adslAtucPerf15MinUasL reaches or exceeds this value within a given 15-minute performance data collection period, an adslAtucUasLThreshTrap notifications will be generated.

Enables and disables the OpStateChangeTrap. Enumeration: 'enable': 1, 'disable': 0.

The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.

The number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLofsThresh1DayTrap'.

The number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLossThresh1DayTrap'.

The number of Loss of Link Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLolsThresh1DayTrap'.

The number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfLprsThresh1DayTrap'.

The number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfESsThresh1DayTrap'.

The number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAtucPerfSesLThresh1DayTrap'.

The number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAtucPerfUasLThresh1DayTrap'.

The number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh1Day'.

The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh'.

The number of Loss of Frame Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLofsThresh1DayTrap'.

The number of Loss of Signal Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLossThresh1DayTrap'.

The number of Loss of Power Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfLprsThresh1DayTrap'.

The number of Errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfESsThresh1DayTrap'.

The number of Severe errored Seconds encountered by an ADSL interface, within any given 1 day performance data collection period, which causes the SNMP agent to send an 'dsAdslAturPerfSesLThresh1DayTrap'.

The number of unavailable errored seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an 'dsAdslAturPerfUasLThresh1DayTrap'.

The number of Forward error correction seconds encountered by an ADSL interface within any giving 1 day performance data collection period, which cause the SNMP agent to send an ' dsAdslAturTrapsPerfFecsLThresh1Day'.

The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.

The number of Forward error correction seconds encountered by an ADSL interface within any giving 15 Minutes performance data collection period, which cause the SNMP agent to send an ' dsAdslAtucTrapsPerfFecsLThresh'.

Enables and disables the PmStateChangeTrap. Enumeration: 'enable': 1, 'disable': 0.

Operational state of the transceiver is changed

Current PM state of the transceiver is changed.

Failed retrains 15-minute interval threshold reached

Severely Errored Seconds 15-minute interval threshold reached

Unavailable Errored Seconds 15-minute interval threshold reached

Forward error correction 15-minute interval threshold reached

Loss of Frames 1-day interval threshold reached

Loss of Signal 1-day interval threshold reached

Loss of Link 1-day interval threshold reached

Loss of Power 1-day interval threshold reached

Errored Seconds 1-day interval threshold reached

Severely Errored Seconds 1-day interval threshold reached

Unavailable Errored Seconds 1-day interval threshold reached

Forward error correction Seconds 1-day interval threshold reached

Severely Errored Seconds 15-minute interval threshold reached

Unavailable Errored Seconds 15-minute interval threshold reached

Forward error correction 15-minute interval threshold reached

Loss of Frames 1-day interval threshold reached

Loss of Signal 1-day interval threshold reached

Loss of Power 1-day interval threshold reached

Errored Seconds 1-day interval threshold reached

Severely Errored Seconds 1-day interval threshold reached

Unavailable Errored Seconds 1-day interval threshold reached

Forward error correction Seconds 1-day interval threshold is reached