ChrComIfEthernetoverATMIfTable-MIB: View SNMP OID List / Download MIB

VENDOR: CHROMATIS NETWORKS INC.


 Home MIB: ChrComIfEthernetoverATMIfTable-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 chrComIfEthernetoverATMIfTableTable 1.3.6.1.4.1.3695.1.2.5.3 no-access
This table is an extension of the ifTable for the Ethernet/ATM interface type. Contains MAC-level configuration parameters and allows association of an interface with a specific LVM and LPG within its ELM
     chrComIfEthernetoverATMIfTableEntry 1.3.6.1.4.1.3695.1.2.5.3.1 no-access
         chrComIfEthernetIfIndex 1.3.6.1.4.1.3695.1.2.5.3.1.1 unsigned32 read-only
Index referring to the interface table
         chrComIfEthernetELMIndex 1.3.6.1.4.1.3695.1.2.5.3.1.2 unsigned32 read-only
ELM index within card (up to 2 ELMs per card; current card has only 1)
         chrComIfEthernetEthernetIfType 1.3.6.1.4.1.3695.1.2.5.3.1.3 ethernetiftypeenum read-only
Type of port (FE/GE, Electrical/Optical, etc.)
         chrComIfEthernetPortEnable 1.3.6.1.4.1.3695.1.2.5.3.1.4 truthvalue read-write
Specifies if port is enabled or disabled. Ingress and egress traffic for this card is dropped if disabled
         chrComIfEthernetAutoNegSpeed 1.3.6.1.4.1.3695.1.2.5.3.1.5 truthvalue read-write
Defines if autonegotiation is allowed for Speed
         chrComIfEthernetAutoNegDuplexMode 1.3.6.1.4.1.3695.1.2.5.3.1.6 truthvalue read-write
Defines if autonegotiation is allowed for DuplexMode
         chrComIfEthernetAutoNegEnFlowControl 1.3.6.1.4.1.3695.1.2.5.3.1.7 truthvalue read-write
Defines if autonegotiation is allowed for En-Flow-Control
         chrComIfEthernetSpeed 1.3.6.1.4.1.3695.1.2.5.3.1.8 speedenum read-write
Speed
         chrComIfEthernetDuplexMode 1.3.6.1.4.1.3695.1.2.5.3.1.9 duplexmodeenum read-write
Duplex Mode (Half/Full)
         chrComIfEthernetEnFlowControl 1.3.6.1.4.1.3695.1.2.5.3.1.10 truthvalue read-write
Defines if 802.3x Flow Control is enabled
         chrComIfEthernetEnBackpressure 1.3.6.1.4.1.3695.1.2.5.3.1.11 truthvalue read-write
Defines if backpressure is enabled in half-duplex mode
         chrComIfEthernetLpgID 1.3.6.1.4.1.3695.1.2.5.3.1.12 unsigned32 read-write
ID of Local Port Group (LPG) within the ELM that this port belongs to
         chrComIfEthernetLvmID 1.3.6.1.4.1.3695.1.2.5.3.1.13 unsigned32 read-write
ID of Local VLAN Member (LVM) within the ELM that this port belongs to
         chrComIfEthernetAlarmVector 1.3.6.1.4.1.3695.1.2.5.3.1.14 integer32 read-only
16 bit field. The following are bits relative positions (0=LSB), and the trap ID associated to each alarm state. 0. Ethernet Loss of Signal (-LOS) (metropolisEthLosAlarm)
         chrComIfEthernetAlarmSeverityProfileIndex 1.3.6.1.4.1.3695.1.2.5.3.1.15 alarmseverityprofileindexenum read-write