CXT1E1-MIB: View SNMP OID List / Download MIB

VENDOR: MEMOTEC COMMUNICATIONS


 Home MIB: CXT1E1-MIB
Download as:   
SNMPv2-CONF, CXProduct-SMI, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 t1e1CfgTable 1.3.6.1.4.1.495.2.1.8.2.10 no-access
The T1/E1 configuration table.
       t1e1CfgEntry 1.3.6.1.4.1.495.2.1.8.2.10.1 no-access
An entry in the T1/E1 configuration table.
           t1e1CfgLinkIndex 1.3.6.1.4.1.495.2.1.8.2.10.1.1 integer read-only
Identifies the physical port with the T1/E1 (t1e1) interface. Range of Values: 1 - 2 Default Value: None Configuration Changed: administrative
           t1e1CfgDebounce 1.3.6.1.4.1.495.2.1.8.2.10.1.10 integer read-write
Specifies the number of loops needed for debouncing. Warning: This is a Private Mode activity that should only be performed by or under the direct supervision of qualified personnel. Range of Values: 1 - 255 Default Value: 2 Configuration Changed: administrative
           t1e1CfgJitterAttenuator 1.3.6.1.4.1.495.2.1.8.2.10.1.11 integer read-write
Defines the position and buffer depth of the Jitter Attenuator when the Attenuator is enabled. Warning: This is a Private Mode activity that should only be performed by or under the direct supervision of qualified personnel. Options: t1e1NoJitterAttenuator (1) t1e1RxAttenuator32Bits (2) t1e1RxAttenuator128Bits (3) t1e1TxAttenuator32Bits (4) t1e1TxAttenuator128Bits (5) Default Value: t1e1NoJitterAttenuator (1) Configuration Changed: administrative Enumeration: 't1e1RxAttenuator128Bits': 3, 't1e1RxAttenuator32Bits': 2, 't1e1TxAttenuator32Bits': 4, 't1e1TxAttenuator128Bits': 5, 't1e1NoJitterAttenuator': 1.
           t1e1CfgSyncCriteria 1.3.6.1.4.1.495.2.1.8.2.10.1.12 integer read-write
Determines the criteria used for Synchronisation. Options: In D4 framing mode, 1 = search for Ft pattern, the search for Fs pattern and 2=cross couple Ft and Fs pattern. In ESF framing mode, 1 = search for FPS pattern only. In ESF framing mode, 2 = search for FPS and verify with CRC6. Warning: This is a Private Mode activity that should only be performed by or under the direct supervision of qualified personnel. Default Value: 1 Configuration Changed: administrative
           t1e1CfgT1RxEqualizerGainLimit 1.3.6.1.4.1.495.2.1.8.2.10.1.13 integer read-write
Program the receiver sensitivity. Warning: This is a Private Mode activity that should only be performed by or under the direct supervision of qualified personnel. Options: t1e1EGLLow (1): Program a low sensitivity of -30 dB. This is recommended for most applications. t1e1EGLHigh (2): Program a high sensitivity of -36 dB. This setting could be required for particular applications, however, with this level of sensitivity the receiver will be more susceptible to crosstalk and the receiver's jitter tolerance will suffer. Default Value: t1e1EGLLow (1) Configuration Changed: administrative Enumeration: 't1e1EGLLow': 1, 't1e1EGLHigh': 2.
           t1e1CfgT1RxLevel 1.3.6.1.4.1.495.2.1.8.2.10.1.50 integer read-only
Indicates in real-time a range of received signal levels. Options: 1: +2.0 to -7.5 dB 2: -7.5 to -15.0 dB 3: -15.0 to -22.5 dB 4: less than -22.5 dB
           t1e1CfgT1FrameAlignmentChange 1.3.6.1.4.1.495.2.1.8.2.10.1.51 timeticks read-only
Indicates the most recent time at which a resynchronization resulted in a change of frame or multiframe alignment. If no such event has occurred since system startup, then the value will be zero.
           t1e1CfgT1JitterAttenuatorTrip 1.3.6.1.4.1.495.2.1.8.2.10.1.52 timeticks read-only
Indicates the most recent time that the jitter attenuator FIFO reached within 4-bits of it's limit on this line interface. If no such event has occurred since system startup, then the value will be zero.