CXModuleHardware-MIB: View SNMP OID List / Download MIB

VENDOR: MEMOTEC COMMUNICATIONS


 Home MIB: CXModuleHardware-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cxModuleHwAlias 1.3.6.1.4.1.495.2.1.5.1.1 alias read-write
Determines the name the network administrator assigns to the CPU card. When you configure via the local console, this name is the command prompt. The setting of this object is dynamic. The system immediately implements the name you choose. Range of Values: From 1 to 32 alphanumeric characters. You can use any combination of lettersor numbers; however, you cannot use blank spaces. Use a dash or underscore as a delimiter. Default value: - CX900 architecture: CX900 - CX1000 architecture: CX1000 Configuration Changed: Operative
 cxModuleHwRevAssemblyAndEco 1.3.6.1.4.1.495.2.1.5.1.2 integer read-only
Displays the hardware revision of the device. You cannot modify this object. It is a display that the software provides. Range of Values: 7 numeric bits Default Value: None
 cxModuleHwPhysSlot 1.3.6.1.4.1.495.2.1.5.1.3 integer read-only
Displays the number of the physical slot where the CPU card resides. You cannot modify this object. It is a display that the software provides. Note: THE CX 900 DOES NOT SUPPORT THIS OBJECT. Range of values: - CX900 architechture: Not supported - CX1000 architechture: From 1 to 16 Default value: None
 cxModuleHwCpuClockSpeed 1.3.6.1.4.1.495.2.1.5.1.4 integer read-only
Displays the CPU clock rate in Khz. You cannot modify this object. It is a display that the software provides. Range of Values: None. The value is hardcoded on the CPU. Default Value: 25000
 cxModuleHwLedsDisplay 1.3.6.1.4.1.495.2.1.5.1.5 integer read-only
Displays the status of the error LED. You cannot modify this object. It is a display that the software provides. Options: on: Error LED is on. off: Error LED is off. Default Value: None
 cxModuleHwFlashEpromSize 1.3.6.1.4.1.495.2.1.5.1.7 integer read-only
Dispays the size, in Kbytes, of the Flash EPROM. You cannot modify this object. It is a display that the software provides. Range of Values: A maximum of 4 digits from 1024 to 6144 Default Value: None
 cxModuleHwPrivateDramSize 1.3.6.1.4.1.495.2.1.5.1.8 integer read-only
Displays the size, in Kbytes, of the System DRAM. You cannot modify this object. It is a display that the software provides. Range of Values: A maximum of 5 digits from 512 to 33792 Default Value: None
 cxModuleHwSharedDramSize 1.3.6.1.4.1.495.2.1.5.1.9 integer read-only
Displays the size, in Kbytes, of the Data Buffer DRAM. You cannot modify this object. It is a display that the software provides. Range of Values: -A maximum of 5 digits from 512 to 33792 Default Value: None
 cxModuleHwUpTimeTicks 1.3.6.1.4.1.495.2.1.5.1.12 timeticks read-only
Displays the number of time ticks,in 10msec increments, since power up. You cannot modify this object. It is a display that the software provides. Range of Values: 0 to 4,294,967,295 Default Value: 0
 cxModuleHwResetTimeOut 1.3.6.1.4.1.495.2.1.5.1.13 integer read-write
Determines the length of delay, in seconds before next scheduled card reset. This type of reset saves the configuration before resetting. The setting of this object is dynamic. The system immediately begins reducing the value you enter. Range of Values: A maximum of 10 digits from 0 to 4,294,967,295 Default Value: 0 Configuration Changed: Operative
 cxModuleHwSwVersion 1.3.6.1.4.1.495.2.1.5.1.14 displaystring read-only
Displays the textual string which identifies the software currently running on the device. You cannot modify this object. It is a display that the software provides.
 cxModuleHwNodeId 1.3.6.1.4.1.495.2.1.5.1.15 integer read-write
Identifies this system with an ID number. This parameter is used only for SKYDATA's connection management. Range of Values: 0 to 65,535 Default Value: None