CXMCPRT-MIB: View SNMP OID List / Download MIB

VENDOR: MEMOTEC COMMUNICATIONS


 Home MIB: CXMCPRT-MIB
Download as:   
SNMPv2-CONF, CXProduct-SMI, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cxMcPrt 1.3.6.1.4.1.495.2.1.1.1
     cxMcPrtGlobal 1.3.6.1.4.1.495.2.1.1.1.1
         cxMcPrtGlobalConsoleRate 1.3.6.1.4.1.495.2.1.1.1.1.1 integer read-write
The front panel console rate for the HC600. Range of Values: 300-19 200 Default Value: 19 200
         cxMcPrtGlobalResetStat 1.3.6.1.4.1.495.2.1.1.1.1.2 integer read-write
Resets all statistics. Options: no(1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
         cxMcPrtGlobalStationId 1.3.6.1.4.1.495.2.1.1.1.1.3 displaystring read-write
The local station identification. No space allowed in write.
     cxMcPrtCfgTable 1.3.6.1.4.1.495.2.1.1.1.2 no-access
cx Port Station Configuration Table.
         cxMcPrtCfgEntry 1.3.6.1.4.1.495.2.1.1.1.2.1 no-access
cx Port Station Configuration Entry gives the state of the configuration associated to a particular port.
             cxMcPrtCfgPortIndex 1.3.6.1.4.1.495.2.1.1.1.2.1.1 integer read-only
Identifies the port by a numerical value. Range of Values: 1-4
             cxMcPrtCfgDriverUsed 1.3.6.1.4.1.495.2.1.1.1.2.1.2 integer read-write
Specifies the port driver used. The driver is associated with a numerical value that identify one of the tables below the object identifier; cxMcPrtDriver for MC600, or cxMcPrtDriver for HC600 driver. Note that HC600 has only one driver. Options: bop(1): MC600 or HC600 asy(2): MC600 only cop(3): MC600 only bsy(4): MC600 only
             cxMcPrtCfgReinitPort 1.3.6.1.4.1.495.2.1.1.1.2.1.3 integer read-write
Activate the planned configurations of the indexed port. Options: no (1) yes (2) Enumeration: 'yes': 2, 'no': 1.
             cxMcPrtCfgUpdated 1.3.6.1.4.1.495.2.1.1.1.2.1.4 integer read-only
The status of the configuration of a port. Options: no (1) yes (2) Enumeration: 'yes': 2, 'no': 1.
     cxMcPrtStatTable 1.3.6.1.4.1.495.2.1.1.1.3 no-access
cx Port Station Statistic Table.
         cxMcPrtStatEntry 1.3.6.1.4.1.495.2.1.1.1.3.1 no-access
cx Port Station Statistic Entry gives the state of the counters associated with a particular port.
             cxMcPrtStatPortNumber 1.3.6.1.4.1.495.2.1.1.1.3.1.1 integer read-only
Indicates the port number of the statistics. Range of Values: 1-4
             cxMcPrtStatRts 1.3.6.1.4.1.495.2.1.1.1.3.1.2 integer read-only
Indicates the current state of the Request to Send signal. Options: off (1) on (2) Enumeration: 'on': 2, 'off': 1.
             cxMcPrtStatDtr 1.3.6.1.4.1.495.2.1.1.1.3.1.3 integer read-only
Indicates the current state of the Data Terminal Ready signal. Options: off (1) on (2) Enumeration: 'on': 2, 'off': 1.
             cxMcPrtStatDsr 1.3.6.1.4.1.495.2.1.1.1.3.1.4 integer read-only
Indicates the current state of the Data Set Ready signal. Options: off (1) on (2) Enumeration: 'on': 2, 'off': 1.
             cxMcPrtStatDcd 1.3.6.1.4.1.495.2.1.1.1.3.1.5 integer read-only
Indicates the current state of the Data Carrier Detect signal. Options: off (1) on (2) Enumeration: 'on': 2, 'off': 1.
             cxMcPrtStatCts 1.3.6.1.4.1.495.2.1.1.1.3.1.6 integer read-only
Indicates the current state of the Clear to Send signal. Options: off (1) on (2) Enumeration: 'on': 2, 'off': 1.
             cxMcPrtStatCntMsgTx 1.3.6.1.4.1.495.2.1.1.1.3.1.7 counter read-only
Indicates the number of frames transmitted on the specified port.
             cxMcPrtStatCntMsgRx 1.3.6.1.4.1.495.2.1.1.1.3.1.8 counter read-only
Indicates the number of frames received on the specified port.
             cxMcPrtStatCntReinit 1.3.6.1.4.1.495.2.1.1.1.3.1.9 counter read-only
Indicates the number of times that the specified port has reinitialized.
             cxMcPrtStatCntFlowCtrlTx 1.3.6.1.4.1.495.2.1.1.1.3.1.10 counter read-only
Indicates the number of times that the specified port has performed output flow control.
             cxMcPrtStatCntFlowCtrlRx 1.3.6.1.4.1.495.2.1.1.1.3.1.11 counter read-only
Indicates the number of times that the specified port has performed input flow control.
             cxMcPrtStatCntErrTx 1.3.6.1.4.1.495.2.1.1.1.3.1.12 counter read-only
Indicates the number of bad frames transmitted on the specified port.
             cxMcPrtStatCntErrRx 1.3.6.1.4.1.495.2.1.1.1.3.1.13 counter read-only
Indicates the number of bad frames received on the specified port.
             cxMcPrtStatCntConnect 1.3.6.1.4.1.495.2.1.1.1.3.1.14 counter read-only
Indicates the number of connections for the specified port. The number of connections is equal to the number of times that the DTR modem signal changed from OFF to ON.
             cxMcPrtStatCntChrDecomp 1.3.6.1.4.1.495.2.1.1.1.3.1.15 counter read-only
Indicates the number of characters transmitted on the port.
             cxMcPrtStatCntChrComp 1.3.6.1.4.1.495.2.1.1.1.3.1.16 counter read-only
Indicates the number of characters received on the port.
             cxMcPrtStatCntBitDecomp 1.3.6.1.4.1.495.2.1.1.1.3.1.17 counter read-only
Indicates the number of bits transmitted on the port.
             cxMcPrtStatCntBitComp 1.3.6.1.4.1.495.2.1.1.1.3.1.18 counter read-only
Indicates the number of bits received on the port.
             cxMcPrtStatStation 1.3.6.1.4.1.495.2.1.1.1.3.1.19 integer read-only
Indicates the station that the port is using to transmit and receive data.
             cxMcPrtStatRoute 1.3.6.1.4.1.495.2.1.1.1.3.1.20 integer read-only
Indicates the route of the station that the port is using.
             cxMcPrtStatHwInterface 1.3.6.1.4.1.495.2.1.1.1.3.1.21 integer read-only
Indicates whether the hardware port interface is DCE or DTE. The value depends on the I/O hardware. Options: dce (1) dte (2) Enumeration: 'dce': 1, 'dte': 2.
             cxMcPrtStatTimeTicks 1.3.6.1.4.1.495.2.1.1.1.3.1.22 timeticks read-only
Indicates the number of milliseconds since the last reset for the current station.
     cxMcPrtPath 1.3.6.1.4.1.495.2.1.1.1.4
         cxMcPrtPathStationPri 1.3.6.1.4.1.495.2.1.1.1.4.1 integer read-write
The primary port station. Range of Values: 1-16 Default Value: 1
         cxMcPrtPathRoutePri 1.3.6.1.4.1.495.2.1.1.1.4.2 integer read-write
The primary route. Range of Values: 1-64 Default Value: 1
         cxMcPrtPathStationScd 1.3.6.1.4.1.495.2.1.1.1.4.3 integer read-write
The secondary port station. Range of Values: 1-16 Default Value: 2
         cxMcPrtPathRouteScd 1.3.6.1.4.1.495.2.1.1.1.4.4 integer read-write
The secondary route. Range of Values: 1-64 Default Value: 2
     cxMcPrtDriver 1.3.6.1.4.1.495.2.1.1.1.5
         cxMcPrtBopTable 1.3.6.1.4.1.495.2.1.1.1.5.1 no-access
cx Port Station MC600 & HC600 Bop Driver Table.
             cxMcPrtBopEntry 1.3.6.1.4.1.495.2.1.1.1.5.1.1 no-access
cx Port Station MC600 & HC600 Bop Driver Entry gives the state of the variables associated to the Bit Oriented Protocol.
                 cxMcPrtBopPortUsed 1.3.6.1.4.1.495.2.1.1.1.5.1.1.1 integer read-only
Indicates the current port number that is used by the BOP driver. Range of Values: 1-4
                 cxMcPrtBopPortStatus 1.3.6.1.4.1.495.2.1.1.1.5.1.1.2 integer read-write
Indicates whether the port is enabled or disabled. Options: disable (1) enable (2) Default Value: disable (1) Enumeration: 'enable': 2, 'disable': 1.
                 cxMcPrtBopComRate 1.3.6.1.4.1.495.2.1.1.1.5.1.1.3 integer read-write
Indicates the port communication rates. Range of Values: HC600: 9600-2048000 MC600: 110-128000 Default Value: HC600: 56 000, MC600: 9600
                 cxMcPrtBopUseLnkErrPassthro 1.3.6.1.4.1.495.2.1.1.1.5.1.1.4 integer read-write
Indicates the link error passthrough state on the port. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBopInterface 1.3.6.1.4.1.495.2.1.1.1.5.1.1.5 integer read-write
Indicates whether the port interface is DTE or DCE. Options: dce (1) dte (2) Default Value: dce (1) Enumeration: 'dce': 1, 'dte': 2.
                 cxMcPrtBopRtsDcdModemCtrl 1.3.6.1.4.1.495.2.1.1.1.5.1.1.6 integer read-write
Use the RTS or DCD modem control on the port. Options: on (1) vary (2) Default Value: on (1) Enumeration: 'on': 1, 'vary': 2.
                 cxMcPrtBopUseRtsDcdCndDataTx 1.3.6.1.4.1.495.2.1.1.1.5.1.1.7 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the presence of data in output queue. Options: no (1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBopUseRtsDcdCndLnk 1.3.6.1.4.1.495.2.1.1.1.5.1.1.8 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the main link status. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBopUseRtsDcdCndRem 1.3.6.1.4.1.495.2.1.1.1.5.1.1.9 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the remote DCD or RTS. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBopDtrCtsModemCtrl 1.3.6.1.4.1.495.2.1.1.1.5.1.1.10 integer read-write
Use the DTR or CTS modem control on the port. Options: on (1) vary (2) Default Value: on (1) Enumeration: 'on': 1, 'vary': 2.
                 cxMcPrtBopUseDtrCtsCndRts 1.3.6.1.4.1.495.2.1.1.1.5.1.1.11 integer read-write
Use the state of the CTS modem control when the port selected is conditioned by the local RTS. Options: no (1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBopUseDtrCtsCndLnk 1.3.6.1.4.1.495.2.1.1.1.5.1.1.12 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the main link status. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBopUseDtrCtsCndRem 1.3.6.1.4.1.495.2.1.1.1.5.1.1.13 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the remote DCD or RTS. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBopLimitBeforeOut 1.3.6.1.4.1.495.2.1.1.1.5.1.1.14 integer read-write
The limit before activation of output for the port. Range of Values: HC600: 2-100, MC600: 5-4000 Default Value: HC600: 5, MC600: 15
                 cxMcPrtBopUseOutCndCtsDtrOn 1.3.6.1.4.1.495.2.1.1.1.5.1.1.15 integer read-write
Use the output enable on CTS or DTR modem control for the port. Options: no(1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBopUseInCndDcdRtsOn 1.3.6.1.4.1.495.2.1.1.1.5.1.1.16 integer read-write
Use the input enable on DCD or RTS modem control for the port. Options: no(1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBopSyncMode 1.3.6.1.4.1.495.2.1.1.1.5.1.1.17 integer read-write
The clock synchronization for the port. Options: normal (1) extern (2) Default Value: normal (1) Enumeration: 'extern': 2, 'normal': 1.
                 cxMcPrtBopDataLifetime 1.3.6.1.4.1.495.2.1.1.1.5.1.1.18 integer read-write
The data lifetime in millisecond for the port. Range of Values: 1-60000 Default Value: 2000
                 cxMcPrtBopUseClockSync 1.3.6.1.4.1.495.2.1.1.1.5.1.1.19 integer read-write
The clocks synchronization on the port. Options: no(1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBopUseFlowCtrlClock 1.3.6.1.4.1.495.2.1.1.1.5.1.1.20 integer read-write
Use the flow control by clocks for the synchronous port. Options: no(1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBopFlowCtrlRate 1.3.6.1.4.1.495.2.1.1.1.5.1.1.21 integer read-write
The flow control rate of the synchronous port. Range of Values: HC600: 300-5609, MC600: 110-9600 Default Value: HC600: 2400. MC600: 300 HC600 DEFVAL { 2400 } MC600 DEFVAL { 300 }
                 cxMcPrtBopLimitOutFlowCtrl 1.3.6.1.4.1.495.2.1.1.1.5.1.1.22 integer read-write
The limit before output flow control of the synchronous port. Range of Values: HC600: 1-100, MC600: 0-4000 Default Value: HC600: 15, MC600: 3
                 cxMcPrtBopLimitInFlowCtrl 1.3.6.1.4.1.495.2.1.1.1.5.1.1.23 integer read-write
The overflow limit before input flow control of the synchronous port. Ranges of Values: HC600: 1-100, MC600: 0-4000 Default Value: HC600: 32, MC600: 512
                 cxMcPrtBopCoding 1.3.6.1.4.1.495.2.1.1.1.5.1.1.24 integer read-write
The coding on the port for bit-oriented protocols. Options: nrz (1) nrzi (2) Default Value: nrz (1) Enumeration: 'nrz': 1, 'nrzi': 2.
                 cxMcPrtBopOutIdleState 1.3.6.1.4.1.495.2.1.1.1.5.1.1.25 integer read-write
The output idle state of the synchronous port. Options: flag (1) mark (2) Default Value: flag (1) Enumeration: 'flag': 1, 'mark': 2.
                 cxMcPrtBopDelayBeforeIdle 1.3.6.1.4.1.495.2.1.1.1.5.1.1.26 integer read-write
The delay between frames before idle for the port. Range of Values: 0-2000 Default Value: 0
                 cxMcPrtBopOutPreambleLng 1.3.6.1.4.1.495.2.1.1.1.5.1.1.27 integer read-write
The output preamble length of the synchronous port. Options: zero (1): HC600 or MC600 one (2): HC600 only two (3): HC600 only four (4): HC600 only eight (5): HC600 only Default Value: zero (1)
         cxMcPrtAsyTable 1.3.6.1.4.1.495.2.1.1.1.5.2 no-access
cx Port Station MC600 Asy Driver Table.
             cxMcPrtAsyEntry 1.3.6.1.4.1.495.2.1.1.1.5.2.1 no-access
cx Port Station MC600 Asy Driver Entry gives the state of the variables associated to the Asynchronous Protocol.
                 cxMcPrtAsyPortUsed 1.3.6.1.4.1.495.2.1.1.1.5.2.1.1 integer read-only
The current port number that is used by the ASY driver.
                 cxMcPrtAsyPortStatus 1.3.6.1.4.1.495.2.1.1.1.5.2.1.2 integer read-write
The port status for enabling or disabling the port. Options: disable (1) enable (2) Default Value: disable (1) Enumeration: 'enable': 2, 'disable': 1.
                 cxMcPrtAsyComRate 1.3.6.1.4.1.495.2.1.1.1.5.2.1.3 integer read-write
The port communication rates. Range of Values: 110-128000 Default Value: 9600
                 cxMcPrtAsyUseLnkErrPassthro 1.3.6.1.4.1.495.2.1.1.1.5.2.1.4 integer read-write
Use the link error pass through on the port. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtAsyInterface 1.3.6.1.4.1.495.2.1.1.1.5.2.1.5 integer read-write
The port interface to DTE or DCE. Options: dce (1) dte (2) Default Value: dce (1) Enumeration: 'dce': 1, 'dte': 2.
                 cxMcPrtAsyRtsDcdModemCtrl 1.3.6.1.4.1.495.2.1.1.1.5.2.1.6 integer read-write
Use the RTS or DCD modem control on the port. Options: on (1) vary (2) Default Value: on (1) Enumeration: 'on': 1, 'vary': 2.
                 cxMcPrtAsyUseRtsDcdCndDataTx 1.3.6.1.4.1.495.2.1.1.1.5.2.1.7 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the presence of data in output queue. Options: no (1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtAsyUseRtsDcdCndLnk 1.3.6.1.4.1.495.2.1.1.1.5.2.1.8 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the main link status. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtAsyUseRtsDcdCndRem 1.3.6.1.4.1.495.2.1.1.1.5.2.1.9 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the remote DCD or RTS. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtAsyDtrCtsModemCtrl 1.3.6.1.4.1.495.2.1.1.1.5.2.1.10 integer read-write
Use the DTR or CTS modem control on the port. Options: on (1) vary (2) Default Value: on (1) Enumeration: 'on': 1, 'vary': 2.
                 cxMcPrtAsyUseDtrCtsCndRts 1.3.6.1.4.1.495.2.1.1.1.5.2.1.11 integer read-write
Use the state of the CTS modem control when the port selected is conditioned by the local RTS. Options: no (1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtAsyUseDtrCtsCndLnk 1.3.6.1.4.1.495.2.1.1.1.5.2.1.12 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the main link status. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtAsyUseDtrCtsCndRem 1.3.6.1.4.1.495.2.1.1.1.5.2.1.13 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the remote DCD or RTS. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtAsyLimitBeforeOut 1.3.6.1.4.1.495.2.1.1.1.5.2.1.14 integer read-write
The limit before activation of output for the port. Range of Values: 1-100 Default Value: 15
                 cxMcPrtAsyOutCndCtsDtrOn 1.3.6.1.4.1.495.2.1.1.1.5.2.1.15 integer read-write
Use the output enable on CTS or DTR modem control for the port. Options: no (1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtAsyInCndDcdRtsOn 1.3.6.1.4.1.495.2.1.1.1.5.2.1.16 integer read-write
Use the input enable on DCD or RTS modem control for the port. Options: no (1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtAsySyncMode 1.3.6.1.4.1.495.2.1.1.1.5.2.1.17 integer read-write
The clock synchronization for the port. Options: normal (1) extern (2) Default Value: normal (1) Enumeration: 'extern': 2, 'normal': 1.
                 cxMcPrtAsyUseDataLifeLimited 1.3.6.1.4.1.495.2.1.1.1.5.2.1.18 integer read-write
Use the data lifetime limited on the asynchronous port. Options: no (1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtAsyDataLifetime 1.3.6.1.4.1.495.2.1.1.1.5.2.1.19 integer read-write
The data lifetime in milliseconds for the port. Range of Values: 1-60000 Default Value: 2000
                 cxMcPrtAsyOutFlowCtrl 1.3.6.1.4.1.495.2.1.1.1.5.2.1.20 integer read-write
The output flow control of the asynchronous port. Options: disable (1) xonxoff (2) ctsdtr (3) Default Value: xonxoff (2) Enumeration: 'ctsdtr': 3, 'disable': 1, 'xonxoff': 2.
                 cxMcPrtAsyInFlowCtrl 1.3.6.1.4.1.495.2.1.1.1.5.2.1.21 integer read-write
The input flow control of the asynchronous port. Options: disable (1) xonxoff (2) ctsdtr (3) Default Value: xonxoff (2) Enumeration: 'ctsdtr': 3, 'disable': 1, 'xonxoff': 2.
                 cxMcPrtAsyXonChr 1.3.6.1.4.1.495.2.1.1.1.5.2.1.22 integer read-write
The XON character value of the asynchronous port. Range of Values: 0-255 Default Value: 17
                 cxMcPrtAsyXoffChr 1.3.6.1.4.1.495.2.1.1.1.5.2.1.23 integer read-write
The XOFF character value of the asynchronous port. Range of Values: 0-255 Default Value: 19
                 cxMcPrtAsyNbBitPerChr 1.3.6.1.4.1.495.2.1.1.1.5.2.1.24 integer read-write
The number of bits per character on the port. Options: six (1) seven (2) eight (3) Default Value: eight (3) Enumeration: 'seven': 2, 'six': 1, 'eight': 3.
                 cxMcPrtAsyParity 1.3.6.1.4.1.495.2.1.1.1.5.2.1.25 integer read-write
The parity on the port. Options: none (1) even (2) odd (3) Default Value: none (1) Enumeration: 'even': 2, 'none': 1, 'odd': 3.
                 cxMcPrtAsyNbStopBit 1.3.6.1.4.1.495.2.1.1.1.5.2.1.26 integer read-write
The number of stop bits per character on the asynchronous port. Options: one (1) onehalf (2) two (3) Default Value: one (1) Enumeration: 'onehalf': 2, 'two': 3, 'one': 1.
                 cxMcPrtAsyUseFlushOutChr 1.3.6.1.4.1.495.2.1.1.1.5.2.1.27 integer read-write
The flush output on specific character on the asynchronous port. Options: no (1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtAsyFlushOutChr 1.3.6.1.4.1.495.2.1.1.1.5.2.1.28 integer read-write
The flush character on the asynchronous port. Range of Values: 0-255 Default Value: 127
         cxMcPrtCopTable 1.3.6.1.4.1.495.2.1.1.1.5.3 no-access
cx Port Station MC600 Cop Driver Table.
             cxMcPrtCopEntry 1.3.6.1.4.1.495.2.1.1.1.5.3.1 no-access
cx Port Station MC600 Cop Driver Entry gives the state of the variables associated to the Character Oriented Protocol.
                 cxMcPrtCopPortUsed 1.3.6.1.4.1.495.2.1.1.1.5.3.1.1 integer read-only
The current port number that is used by the COP Driver. Range of Values: 1-4
                 cxMcPrtCopPortStatus 1.3.6.1.4.1.495.2.1.1.1.5.3.1.2 integer read-write
The port status for enabling or disabling the port. Options: disable (1) enable (2) Default Value: disable (1) Enumeration: 'enable': 2, 'disable': 1.
                 cxMcPrtCopComRate 1.3.6.1.4.1.495.2.1.1.1.5.3.1.3 integer read-write
The port communication rates. Range of Values: 110-128000 Default Value: 9600
                 cxMcPrtCopUseLnkErrPassthro 1.3.6.1.4.1.495.2.1.1.1.5.3.1.4 integer read-write
Use the link error pass through on the port. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopInterfaceType 1.3.6.1.4.1.495.2.1.1.1.5.3.1.5 integer read-write
The port interface type: DTE or DCE. Options: dce (1) dte (2) Default: dce (2) Enumeration: 'dce': 1, 'dte': 2.
                 cxMcPrtCopRtsDcdModemCtrl 1.3.6.1.4.1.495.2.1.1.1.5.3.1.6 integer read-write
Use the RTS or DCD modem control on the port. Options on (1) vary (2) Default Value: on (1) Enumeration: 'on': 1, 'vary': 2.
                 cxMcPrtCopUseRtsDcdCndDataTx 1.3.6.1.4.1.495.2.1.1.1.5.3.1.7 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the presence of data in output queue. Options: no (1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopUseRtsDcdCndLnk 1.3.6.1.4.1.495.2.1.1.1.5.3.1.8 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the main link status. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopUseRtsDcdCndRem 1.3.6.1.4.1.495.2.1.1.1.5.3.1.9 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the remote DCD or RTS. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopDtrCtsModemCtrl 1.3.6.1.4.1.495.2.1.1.1.5.3.1.10 integer read-write
Use the DTR or CTS modem control on the port. Options: on (1) vary (2) Default Value: on (1) Enumeration: 'on': 1, 'vary': 2.
                 cxMcPrtCopUseDtrCtsCndRts 1.3.6.1.4.1.495.2.1.1.1.5.3.1.11 integer read-write
Use the state of the CTS modem control when the port selected is conditioned by the local RTS. Options: no (1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopUseDtrCtsCndLnk 1.3.6.1.4.1.495.2.1.1.1.5.3.1.12 integer read-write
Use the the RTS or DCD modem control when the port selected is conditioned by the main link status. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopUseDtrCtsCndRem 1.3.6.1.4.1.495.2.1.1.1.5.3.1.13 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the remote DCD or RTS. Options: no (1) yes (2) Default Value: yes (2) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopLimitBeforeOut 1.3.6.1.4.1.495.2.1.1.1.5.3.1.14 integer read-write
The limit before activation of output for the port. Range of Values: 5-4000 Default Value: 15
                 cxMcPrtCopUseOutCndCtsDtrOn 1.3.6.1.4.1.495.2.1.1.1.5.3.1.15 integer read-write
The output enable on CTS or DTR modem control for the port. Options: no (1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopUseInCndDcdRtsOn 1.3.6.1.4.1.495.2.1.1.1.5.3.1.16 integer read-write
The input enable on DCD or RTS modem control for the port. Options: no (1) yes (2) Default Value: no (1) Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopSyncMode 1.3.6.1.4.1.495.2.1.1.1.5.3.1.17 integer read-write
The clock synchronization for the port. Options: normal (1) extern (2) Default Value: normal (1) Enumeration: 'extern': 2, 'normal': 1.
                 cxMcPrtCopDataLifetime 1.3.6.1.4.1.495.2.1.1.1.5.3.1.18 integer read-write
The data lifetime in milliseconds for the port. Range of Values: 1-60000
                 cxMcPrtCopUseClockSync 1.3.6.1.4.1.495.2.1.1.1.5.3.1.19 integer read-write
The clocks synchronization on the port. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopUseFlowCtrlClock 1.3.6.1.4.1.495.2.1.1.1.5.3.1.20 integer read-write
The use of flow control by clocks of the synchronous port. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopFlowCtrlRate 1.3.6.1.4.1.495.2.1.1.1.5.3.1.21 integer read-write
The use of flow control rate of the synchronous port.
                 cxMcPrtCopLimitOutFlowCtrl 1.3.6.1.4.1.495.2.1.1.1.5.3.1.22 integer read-write
The limit before output flow control of the synchronous port.
                 cxMcPrtCopLimitInFlowCtrl 1.3.6.1.4.1.495.2.1.1.1.5.3.1.23 integer read-write
The overflow limit before input flow control for the port.
                 cxMcPrtCopOutIdleState 1.3.6.1.4.1.495.2.1.1.1.5.3.1.24 integer read-write
The output idle state for the port. Enumeration: 'mark': 2, 'space': 1.
                 cxMcPrtCopNbBitPerChr 1.3.6.1.4.1.495.2.1.1.1.5.3.1.25 integer read-write
The number of bits per character on the port. Enumeration: 'seven': 2, 'six': 1, 'eight': 3.
                 cxMcPrtCopParity 1.3.6.1.4.1.495.2.1.1.1.5.3.1.26 integer read-write
The parity on the port. Enumeration: 'even': 2, 'none': 1, 'odd': 3.
                 cxMcPrtCopSyncChrOne 1.3.6.1.4.1.495.2.1.1.1.5.3.1.27 integer read-write
The synchronization character number one for the port.
                 cxMcPrtCopSyncChrTwo 1.3.6.1.4.1.495.2.1.1.1.5.3.1.28 integer read-write
The synchronization character number two for the port.
                 cxMcPrtCopNbSyncChr 1.3.6.1.4.1.495.2.1.1.1.5.3.1.29 integer read-write
The number of synchronization character for the port.
                 cxMcPrtCopUseDesyncChr 1.3.6.1.4.1.495.2.1.1.1.5.3.1.30 integer read-write
Use the desynchronization character on the port. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopDesyncChr 1.3.6.1.4.1.495.2.1.1.1.5.3.1.31 integer read-write
The desynchronization character for the port.
                 cxMcPrtCopNbDesyncChr 1.3.6.1.4.1.495.2.1.1.1.5.3.1.32 integer read-write
The number of desynchronization character for the port.
                 cxMcPrtCopUseDesyncRtsFall 1.3.6.1.4.1.495.2.1.1.1.5.3.1.33 integer read-write
Use the desynchronization on RTS fall on the port. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtCopBitSense 1.3.6.1.4.1.495.2.1.1.1.5.3.1.34 integer read-write
The bit sense on the port. Enumeration: 'inverted': 2, 'normal': 1.
         cxMcPrtBsyTable 1.3.6.1.4.1.495.2.1.1.1.5.4 no-access
cx Port Station MC600 Bsy Driver Table.
             cxMcPrtBsyEntry 1.3.6.1.4.1.495.2.1.1.1.5.4.1 no-access
cx Port Station MC600 Bsy Driver Entry gives the state of the variables associated to the Bi-synchronous Protocol.
                 cxMcPrtBsyPortUsed 1.3.6.1.4.1.495.2.1.1.1.5.4.1.1 integer read-only
The current port number that is used by the BSY Driver.
                 cxMcPrtBsyPortStatus 1.3.6.1.4.1.495.2.1.1.1.5.4.1.2 integer read-write
The port status for enabling or disabling the port. Enumeration: 'enable': 2, 'disable': 1.
                 cxMcPrtBsyComRate 1.3.6.1.4.1.495.2.1.1.1.5.4.1.3 integer read-write
The port communication rates.
                 cxMcPrtBsyUseLnkErrPassthro 1.3.6.1.4.1.495.2.1.1.1.5.4.1.4 integer read-write
Use the link error pass through on the port. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBsyInterface 1.3.6.1.4.1.495.2.1.1.1.5.4.1.5 integer read-write
The port interface type: DTE or DCE. Enumeration: 'dce': 1, 'dte': 2.
                 cxMcPrtBsyRtsDcdModemCtrl 1.3.6.1.4.1.495.2.1.1.1.5.4.1.6 integer read-write
Use the RTS or DCD modem control on the port. Enumeration: 'on': 1, 'vary': 2.
                 cxMcPrtBsyUseRtsDcdCndDataTx 1.3.6.1.4.1.495.2.1.1.1.5.4.1.7 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the presence of data in output queue. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBsyUseRtsDcdCndLnk 1.3.6.1.4.1.495.2.1.1.1.5.4.1.8 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the main link status. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBsyUseRtsDcdCndRem 1.3.6.1.4.1.495.2.1.1.1.5.4.1.9 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the remote DCD or RTS. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBsyDtrCtsModemCtrl 1.3.6.1.4.1.495.2.1.1.1.5.4.1.10 integer read-write
Use the DTR or CTS modem control on the port. Enumeration: 'on': 1, 'vary': 2.
                 cxMcPrtBsyUseDtrCtsCndRts 1.3.6.1.4.1.495.2.1.1.1.5.4.1.11 integer read-write
Use the state of the CTS modem control when the port selected is conditioned by the local RTS. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBsyUseDtrCtsCndLnk 1.3.6.1.4.1.495.2.1.1.1.5.4.1.12 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the main link status. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBsyUseDtrCtsCndRem 1.3.6.1.4.1.495.2.1.1.1.5.4.1.13 integer read-write
Use the state of the RTS or DCD modem control when the port selected is conditioned by the remote DCD or RTS. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBsyLimitBeforeOut 1.3.6.1.4.1.495.2.1.1.1.5.4.1.14 integer read-write
The limit before activation of output for the port.
                 cxMcPrtBsyUseOutCndCtsDtrOn 1.3.6.1.4.1.495.2.1.1.1.5.4.1.15 integer read-write
Use the output enable on CTS or DTR modem control for the port. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBsyUseInCndDcdRtsOn 1.3.6.1.4.1.495.2.1.1.1.5.4.1.16 integer read-write
Use the input enable on DCD or RTS modem control for the port. Enumeration: 'yes': 2, 'no': 1.
                 cxMcPrtBsySyncMode 1.3.6.1.4.1.495.2.1.1.1.5.4.1.17 integer read-write
The clock synchronization for the port. Enumeration: 'extern': 2, 'normal': 1.
                 cxMcPrtBsyDataLifetime 1.3.6.1.4.1.495.2.1.1.1.5.4.1.18 integer read-write
The data lifetime in milliseconds for the port.
                 cxMcPrtBsyChrSet 1.3.6.1.4.1.495.2.1.1.1.5.4.1.19 integer read-write
The character set on the port. Enumeration: 'usaascii': 2, 'trans': 3, 'ebcdic': 1.
                 cxMcPrtBsyParity 1.3.6.1.4.1.495.2.1.1.1.5.4.1.20 integer read-write
The parity on the port. Enumeration: 'even': 2, 'none': 1, 'odd': 3.
                 cxMcPrtBsyBlkChkChr 1.3.6.1.4.1.495.2.1.1.1.5.4.1.21 integer read-write
The block check character on the port. Enumeration: 'crc': 1, 'lrc': 2.
                 cxMcPrtBsyNbSyncChr 1.3.6.1.4.1.495.2.1.1.1.5.4.1.22 integer read-write
The number of synchronization character for the port.
                 cxMcPrtBsyMaxFrameSize 1.3.6.1.4.1.495.2.1.1.1.5.4.1.23 integer read-write
The maximum frame size for the port.