CXDDS-MIB: View SNMP OID List / Download MIB

VENDOR: MEMOTEC COMMUNICATIONS


 Home MIB: CXDDS-MIB
Download as:   
SNMPv2-CONF, CXProduct-SMI, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ddsSlotTable 1.3.6.1.4.1.495.2.1.6.39.1 no-access
Identifies the configuration information for a specific DDS access point and its associated hardware port.
     ddsSlotEntry 1.3.6.1.4.1.495.2.1.6.39.1.1 no-access
Identifies the configuration information for a specific DDS access point and its associated hardware port.
         ddsSlotNumber 1.3.6.1.4.1.495.2.1.6.39.1.1.1 sapindex read-only
Identifies a DDS access point by a numerical value. Each DDS access point has a unique value.
         ddsSlotAlias 1.3.6.1.4.1.495.2.1.6.39.1.1.2 alias read-write
Assigns a textual name to the DDS access point. Each access point requires a unique name. You may not assign the same name twice. Default Value: none Range of Values: up to 12 alphanumeric characters, the first must be a letter. Configuration Changed: operative
         ddsSlotRowStatus 1.3.6.1.4.1.495.2.1.6.39.1.1.3 integer read-write
Determines the status of the objects in a row. Default Value: valid Options: invalid (1): row is flagged, after next reset the values will be disabled and the row will be deleted from the table valid (2): values are enabled Configuration Changed: administrative Enumeration: 'valid': 2, 'invalid': 1.
         ddsSlotStatus 1.3.6.1.4.1.495.2.1.6.39.1.1.4 integer read-only
Identifies the status of the DDS option card as present, not present or present but failed. Default Value: none Options: dds-not-present (1) dds-present (2) dds-present-failed (3) Enumeration: 'dds-present': 2, 'dds-not-present': 1, 'dds-present-failed': 3.
         ddsSlotConfigLineType 1.3.6.1.4.1.495.2.1.6.39.1.1.5 integer read-write
Assigns the DDS line configuration. Default Value: telco-point-to-point (1) Options: telco-point-to-point (1) telco-multipoint (2) idm-timing-slave (3) idm-timing-master (4) Configuration Changed: operative Enumeration: 'ldm-timing-slave': 3, 'telco-multipt': 2, 'ldm-timing-master': 4, 'telco-point-to-point': 1.
         ddsSlotConfigLineService 1.3.6.1.4.1.495.2.1.6.39.1.1.6 integer read-write
Assigns the DDS line service type. Default Value: dds-56K (2) Range of Values: clear-channel-64K (1) switched-56K (2) dds-56K (3) dds-19200 (4) dds-9600 (5) dds-4800 (6) dds-2400 (7) dds-1200 (8) Configuration Changed: operative Enumeration: 'dds-4800': 6, 'dds-9600': 5, 'dds-56K': 3, 'dds-19200': 4, 'dds-2400': 7, 'clear-channel-64K': 1, 'switched-56K': 2.
         ddsSlotConfigLoopback 1.3.6.1.4.1.495.2.1.6.39.1.1.7 integer read-write
Specifies the DDS loopback type. Default Value: no-loopback (1) Range of Values: no-loopback (1) dte-loopback (2) loop2 (3), loop3 (4), loop4 (5) remote-loop2 (6) Configuration Changed: operative Enumeration: 'remote-loop2': 6, 'no-loopback': 1, 'loop2': 3, 'loop3': 4, 'dte-loopback': 2, 'loop4': 5.
         ddsSlotConfigRemLoop2LocalAddress 1.3.6.1.4.1.495.2.1.6.39.1.1.8 integer read-write
Specifies the local address for V.54 remote loop2. Default Value: none Range of Values: 0 to 255 The 34 valid V.54 hex addresses include: 0x01, 0x03, 0x05, 0x07, 0x09, 0x0B, 0x0D, 0x0F, 0x11, 0x13, 0x15, 0x17, 0x19, 0x1B, 0x1D, 0x1F, 0x25, 0x27, 0x2B, 0x2D, 0x2F, 0x33, 0x35, 0x37, 0x3B, 0x3D, 0x3F, 0x55, 0x57, 0x5B, 0x5F, 0x6F, 0x77, 0x7F Configuration Changed: operative
         ddsSlotConfigRemLoop2RemoteAddress 1.3.6.1.4.1.495.2.1.6.39.1.1.9 integer read-write
Specifies the remote address for V.54 remote loop2. Range of Values: 0 to 255 Default Value: none Configuration Changed: operative
         ddsSlotConfigPatternGen 1.3.6.1.4.1.495.2.1.6.39.1.1.10 integer read-write
Specifies the type of pattern generated. Range of Values: no-pattern (1) pattern-511 (2) pattern-511-with-errors (3) Default Value: no-pattern (1) Configuration Changed: operative Enumeration: 'pattern-511': 2, 'pattern-511-with-errors': 3, 'no-pattern': 1.
         ddsSlotDialNumber 1.3.6.1.4.1.495.2.1.6.39.1.1.11 displaystring read-write
Assigns the dial number for switched56 applications. Default Value: none Range of Values: 12 character octet string Configuration Changed: operative
         ddsSlotSoftwareRevision 1.3.6.1.4.1.495.2.1.6.39.1.1.12 integer read-only
Indicates the DDS firmware revision as an integer value from 0 to 255. Default Value: none Range of Values: 0-255
         ddsSlotStuffingOption 1.3.6.1.4.1.495.2.1.6.39.1.1.13 integer read-only
Identifies whether the clear channel chip (ccc) option (for 64K clear channel) is installed. Default Value: none Options: ccc-installed (1) ccc-not-installed (2) Enumeration: 'ccc-installed': 1, 'ccc-not-installed': 2.
         ddsSlotLineQuality 1.3.6.1.4.1.495.2.1.6.39.1.1.14 integer read-only
Identifies whether the link is up, if no link exists or if a network error (OOS - out of service) has occurred. Default Value: none Options: link (1) no-link (2) network-error-oos (3) Enumeration: 'network-error-oos': 3, 'link': 1, 'no-link': 2.
         ddsSlotLineRelativeReceiveLevelMin 1.3.6.1.4.1.495.2.1.6.39.1.1.15 integer read-only
Indicates the minimum relative receive line level. Default Value: none Range of Values: 0-255
         ddsSlotLineRelativeReceiveLevelMax 1.3.6.1.4.1.495.2.1.6.39.1.1.16 integer read-only
Indicates the maximum relative receive line level. Default Value: none Range of Values: 0-255
         ddsSlotLineLoopback 1.3.6.1.4.1.495.2.1.6.39.1.1.17 integer read-only
Indicates the loopback status of the line. Options: none (1) csu-loopback (2) dsu-loopback (3) dte-loopback (4) loop2 (5) loop3 (6) loop4 (7) remote-loop2 (8) Default Value: none (1) Enumeration: 'remote-loop2': 8, 'none': 1, 'csu-loopback': 2, 'loop2': 5, 'loop3': 6, 'dte-loopback': 4, 'dsu-loopback': 3, 'loop4': 7.
         ddsSlotResultErtPatternDetect 1.3.6.1.4.1.495.2.1.6.39.1.1.18 integer read-only
Identifies the reception of the 511 bit pattern or not. Options: not-receiving-pattern (1) receiving-pattern (2) receiving-patt-with-errors (3) Default Value: none Enumeration: 'receiving-pattern': 2, 'not-receiving-pattern': 1, 'receiving-patt-with-errors': 3.
         ddsSlotResultPatternGen 1.3.6.1.4.1.495.2.1.6.39.1.1.19 integer read-only
Identifies what type of pattern the DDS is generating on the line. Options: no-pattern (1) ert-pattern (2) ert-with-errors (3) Default: none Enumeration: 'ert-pattern': 2, 'no-pattern': 1, 'ert-with-errors': 3.
         ddsSlotResultDialing 1.3.6.1.4.1.495.2.1.6.39.1.1.20 integer read-only
Indicates the dialing result codes for switched56 service as: dialing, connection made, the connection is not switched56, that a number has not been supplied by the host, no link available, no wink available, wink invalid or no answer. Options: dialing-idle (1) dialing-now (2) connection-made (3) err-no-num-from-host (4) err-no-link (5) err-no-rx-idle (6) err-no-wink (7) err-invalid-wink (8) err-no-answer (9) Default Value: none Enumeration: 'err-no-wink': 7, 'err-no-rx-idle': 6, 'dialing-idle': 1, 'err-invalid-wink': 8, 'dialing-now': 2, 'err-no-link': 5, 'err-no-num-from-host': 4, 'connection-made': 3, 'err-no-answer': 9.
         ddsSlotModel 1.3.6.1.4.1.495.2.1.6.39.1.1.21 integer read-only
Indicates the Printed Circuit Board (PCB) model number . Range of Values: 0-7 Default: none
         ddsSlotRevision 1.3.6.1.4.1.495.2.1.6.39.1.1.22 integer read-only
Indicates the PCB revision level. Range of Values: 0-15 Default Value: none
         ddsSlotEco 1.3.6.1.4.1.495.2.1.6.39.1.1.23 integer read-only
Indicates the PCB Engineering Change Order (ECO) level. Range of Values: 0-15 Default Value: none
         ddsSlotLineTrap 1.3.6.1.4.1.495.2.1.6.39.1.1.24 integer read-write
Determines the status of the line trap. Options: disabled (1) enabled (2) Default Value: disabled (1) Configuration Changed: operative Enumeration: 'disabled': 1, 'enabled': 2.
         ddsSlotLoopTrap 1.3.6.1.4.1.495.2.1.6.39.1.1.25 integer read-write
Determines the status of the loopback change trap. Range of Values: disabled (1) enabled (2) Default Value: disabled (1) Configuration Changed: operative Enumeration: 'disabled': 1, 'enabled': 2.
   ddsSlotLineStatusChange 1.3.6.1.4.1.495.2.1.6.390.1
Indicates that an alarm has occurred. The line quality currently in use at the DDS access point has changed state to any of the states defined in object ddsSlotLineQuality.
   ddsSlotLoopStatusChange 1.3.6.1.4.1.495.2.1.6.390.2
Indicates an alarm status has occurred. The loopback status currently in use at the DDS access point has changed state to any of the states defined in object ddsSlotLineLoopback.