CTRON-TX-QUEUE-ARBITRATION-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: CTRON-TX-QUEUE-ARBITRATION-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, CTRON-MIB-NAMES, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ctTxQArbConfig 1.3.6.1.4.1.52.4.1.5.12.1
     ctTxQPortGroupMapTable 1.3.6.1.4.1.52.4.1.5.12.1.1 no-access
The ctTxQPortGroupMapTable defines the mapping of interfaces to a specific port group.
         ctTxQPortGroupEntry 1.3.6.1.4.1.52.4.1.5.12.1.1.1 no-access
Defines a particular entry containing objects pertaining to definition and control over interfaces supporting multiple transmit queue arbitration.
             ctTxQPortGroup 1.3.6.1.4.1.52.4.1.5.12.1.1.1.1 integer read-only
Indicates the transmit queue port group to which the interface claims membership. The specific interface is indicated by the instancing information.
     ctTxQArbTable 1.3.6.1.4.1.52.4.1.5.12.1.2 no-access
A table containing entries to specify the approximate priority for servicing of each transmit queue for each port group on the device.
         ctTxQArbEntry 1.3.6.1.4.1.52.4.1.5.12.1.2.1 no-access
Specifies the entries in the ctTxQArbTable.
             ctTxQArbNumQueues 1.3.6.1.4.1.52.4.1.5.12.1.2.1.2 integer read-only
The number of transmit queues for each port in this port group.
             ctTxQArbNumSlices 1.3.6.1.4.1.52.4.1.5.12.1.2.1.3 integer read-only
The number of 'slices' into which transmit resources are divided. This determines the resolution with which transmit priority can be allocated to each of the transmit queues. For example, if the number of slices is 16, then transmit resources may be allocated to each transmit queue in units of 1/16 (6.25% of the total). The numbers of slices allocated to all queues must add up to the value of this object (i.e., 100%).
             ctTxQArbSetting 1.3.6.1.4.1.52.4.1.5.12.1.2.1.4 octet string read-write
The approximate percentage of a port's transmit resources to be allocated to each transmit queue. This allows for fine-tuning of the 'strict priority' configuration. Under strict priority, the highest queue (ctTxQArbNumQueues - 1) has the highest priority, followed by (ctTxQArbNumQueues - 2), etc. Queue 0 always has the lowest priority. All entries in a higher priority queue will be transmitted before any entries from the lower priority queues. This object allows the modification of the strict priority scheme so that lower priority queues can be guaranteed some access to the transmitter. This object is an octet string in which the number of octets corresponds to the number of transmit queues for each port in this port group, as indicated by ctTxQArbNumQueues. The value of the first octet represents the number of 'slices' of transmit resources to allocate to Queue 0, the second octet represents the number for Queue 1, and so forth. The sum of all the octets in the octet string must add up to the total number of slices available for the port. For example, on a port having 4 transmit queues and where transmit resources are divided into 16 slices, writing an octet string of {0x00, 0x04, 0x04, 0x08} would have the following effect: At least 50% of the frames transmitted are from Queue 3 At least 25% of the frames transmitted are from Queue 2 At least 25% of the frames transmitted are from Queue 1 No frames will be transmitted from Queue 0 until Queues 1, 2 and 3 are empty.
 ctTxQBufferConfig 1.3.6.1.4.1.52.4.1.5.12.2
     ctTxQBufferOptimizeEnable 1.3.6.1.4.1.52.4.1.5.12.2.1 integer read-write
enabled (1) - optimize system buffer distribution for default CoS queue disabled (2) - use default system buffer distribution. Enumeration: 'enable': 1, 'disable': 2.