CTRON-SFPS-CONNECTION-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: CTRON-SFPS-CONNECTION-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, CTRON-SFPS-INCLUDE-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sfpsConnectionTable 1.3.6.1.4.1.52.4.2.4.2.1.3.1 no-access
This table contains the connection information for all active connections on the SFPS access ports.
     sfpsConnectionEntry 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1 no-access
Each entry specifies the connection information for the active connection for which the entry exists.
         sfpsConnectionDestination 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.1 sfpsaddress read-only
The destination SFPS address for this source/destination connection.
         sfpsConnectionSource 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.2 sfpsaddress read-only
The source SFPS address for this source/destination connection.
         sfpsConnectionPrimInPort 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.3 integer read-only
Identifies the primary inbound SFPS switch port.
         sfpsConnectionPrimOutPort 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.4 integer read-only
Identifies the primary outbound SFPS switch port. All switched traffic for this connection will be transmitted on this outbound port.
         sfpsConnectionSecInPort 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.5 integer read-only
Identifies the secondaryinbound SFPS switch port.
         sfpsConnectionSecOutPort 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.6 integer read-only
Identifies the secondary outbound SFPS switch port. All switched traffic for this connection will be transmitted on this outbound port.
         sfpsConnectionCtrlStatus 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.7 integer read-write
The control state of the SFPS connection. Enumeration: 'other': 1, 'activate': 2, 'under-creation': 4, 'delete': 3.
         sfpsConnectionAdminStatus 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.8 integer read-write
The administrative state of the SFPS connection. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         sfpsConnectionAge 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.9 timeticks read-only
Indicates the age of the connection.
         sfpsConnectionType 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.10 integer read-only
Sets the type of connection. Provisioned connections are setup manually; switched and vlan connections are setup dynammically. Enumeration: 'provisioned': 2, 'tap': 7, 'switched': 3, 'self-prog-non-filter': 5, 'netport-filter': 4, 'vlan': 6, 'mcast': 8, 'filter': 1.
         sfpsConnectionPkts 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.11 counter read-only
Indicates the total number of packets sent on this connection.
         sfpsConnectionBytes 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.12 counter read-only
Indicates the total number of bytes sent on this connection.
         sfpsConnectionCanAge 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.13 integer read-only
         sfpsConnectionPrimOutPorts 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.14 displaystring read-only
Identifies a list of outbound SFPS switch ports. All switched traffic for this connection will be transmitted on these outbound ports.
         sfpsConnectionSecOutPorts 1.3.6.1.4.1.52.4.2.4.2.1.3.1.1.15 displaystring read-only
Identifies a list of outbound SFPS switch ports. All switched traffic for this connection will be transmitted on these outbound ports.
     sfpsConnectionLookupAPIVerb 1.3.6.1.4.1.52.4.2.4.2.1.3.2.1 integer read-write
Specifies the action to be initiated as a result of setting this leaf. Enumeration: 'getEntry': 1.
     sfpsConnectionLookupAPIMacAddr 1.3.6.1.4.1.52.4.2.4.2.1.3.2.2 sfpsaddress read-write
MAC address to be looked up as either the Source or Destination addresses.
     sfpsConnectionLookupAPIDestAddr 1.3.6.1.4.1.52.4.2.4.2.1.3.2.3 sfpsaddress read-only
Destination MAC address
     sfpsConnectionLookupAPISourceAddr 1.3.6.1.4.1.52.4.2.4.2.1.3.2.4 sfpsaddress read-only
Source MAC address
     sfpsConnectionLookupAPIPrimInPort 1.3.6.1.4.1.52.4.2.4.2.1.3.2.5 integer read-only
Source port number
     sfpsConnectionLookupAPIPrimOutPort 1.3.6.1.4.1.52.4.2.4.2.1.3.2.6 integer read-only
Destination port number. If -1, denotes multiple out ports.
     sfpsConnectionLookupAPISecInPort 1.3.6.1.4.1.52.4.2.4.2.1.3.2.7 integer read-only
Source port number
     sfpsConnectionLookupAPISecOutPort 1.3.6.1.4.1.52.4.2.4.2.1.3.2.8 integer read-only
Destination port number. If 01, denotes multiple out ports
     sfpsConnectionLookupAPICtrlStatus 1.3.6.1.4.1.52.4.2.4.2.1.3.2.9 integer read-only
Control status Enumeration: 'other': 1, 'activate': 2, 'under-creation': 4, 'delete': 3.
     sfpsConnectionLookupAPIAdminStatus 1.3.6.1.4.1.52.4.2.4.2.1.3.2.10 integer read-only
Administrative status Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     sfpsConnectionLookupAPIAge 1.3.6.1.4.1.52.4.2.4.2.1.3.2.11 timeticks read-only
Age of connection
     sfpsConnectionLookupAPIType 1.3.6.1.4.1.52.4.2.4.2.1.3.2.12 integer read-only
Type of connection Enumeration: 'provisioned': 2, 'tap': 7, 'self-prog-filter': 4, 'switched': 3, 'self-prog-non-filter': 5, 'vlan': 6, 'mcast': 8, 'flood': 9, 'other': 1.
     sfpsConnectionLookupAPIPkts 1.3.6.1.4.1.52.4.2.4.2.1.3.2.13 integer read-only
Number of packets switched on this connection
     sfpsConnectionLookupAPIBytes 1.3.6.1.4.1.52.4.2.4.2.1.3.2.14 integer read-only
Number of bytes switched on this connection
     sfpsConnectionLookupAPICanAge 1.3.6.1.4.1.52.4.2.4.2.1.3.2.15 integer read-only
Boolean to determine if this connection will be aged. True (1) means to age.
     sfpsConnectionLookupAPIPrimOutPorts 1.3.6.1.4.1.52.4.2.4.2.1.3.2.16 displaystring read-only
If Primary OutPort is -1, the multiple outports will be displayed in text format
     sfpsConnectionLookupAPISecOutPorts 1.3.6.1.4.1.52.4.2.4.2.1.3.2.17 displaystring read-only
If Secondary OutPort is -1, the multiple outports will be displayed in text format
     sfpsConnectionConfigAPIVerb 1.3.6.1.4.1.52.4.2.4.2.1.3.3.1 integer read-write
Specifies the verb. Enumeration: 'setParameter': 3, 'agePartial': 1, 'ageFilters': 4, 'ageFull': 2, 'stopAging': 5.
     sfpsConnectionConfigAPICnxHiMark 1.3.6.1.4.1.52.4.2.4.2.1.3.3.2 integer read-write
Specifies the percentage of the Connection Table needed to be full before beginning aging.
     sfpsConnectionConfigAPICnxNumToAge 1.3.6.1.4.1.52.4.2.4.2.1.3.3.3 integer read-write
Specifies the number of connections to age at each pass.
     sfpsConnectionConfigAPIAgePeriod 1.3.6.1.4.1.52.4.2.4.2.1.3.3.4 integer read-write
Specifies the age period. Units in minutes. 0 - No periodic aging N - age every N minutes
     sfpsConnectionConfigAPIAgePassInProgress 1.3.6.1.4.1.52.4.2.4.2.1.3.3.5 integer read-only
Specifies whether the age pass is in progress. 0 - not aging now 1 - aging now.
     sfpsConnectionConfigAPICurCapacity 1.3.6.1.4.1.52.4.2.4.2.1.3.3.6 integer read-only
Specifies the percentage of the Connection Table used.
     sfpsConnectionConfigAPILastPassTime 1.3.6.1.4.1.52.4.2.4.2.1.3.3.7 timeticks read-only
Specifies the time that the last age pass occured.
     sfpsConnectionConfigAPITimeSinceLastPass 1.3.6.1.4.1.52.4.2.4.2.1.3.3.8 timeticks read-only
Specifies the time since the last age pass.
     sfpsConnectionConfigAPIAgePassDelta 1.3.6.1.4.1.52.4.2.4.2.1.3.3.9 timeticks read-only
Specifies the time between the last two age passes.
     sfpsConnectionConfigAPIAgePassCount 1.3.6.1.4.1.52.4.2.4.2.1.3.3.10 integer read-only
Specifies the number of aging passes that have occured.
     sfpsConnectionConfigAPIAgeStatsHiMark 1.3.6.1.4.1.52.4.2.4.2.1.3.3.11 integer read-write
     sfpsConnectionConfigAPIStatsAgingEnable 1.3.6.1.4.1.52.4.2.4.2.1.3.3.12 integer read-write
     sfpsConnectionConfigAPIAgeStatsAgingSupported 1.3.6.1.4.1.52.4.2.4.2.1.3.3.13 integer read-only
     sfpsConnectionConfigAPIIdleCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.3.14 integer read-only
     sfpsConnectionConfigAPIActiveCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.3.15 integer read-only
     sfpsConnectionStatsMaxCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.4.1 integer read-only
The maximum number of bi-directional connections allocated for the switch.
     sfpsConnectionStatsTotalCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.4.2 integer read-only
The total number of bi-directional connections used in the switch.
     sfpsConnectionStatsSwitchedCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.4.3 integer read-only
The number of bi-directional connections used in the switch with type
     sfpsConnectionStatsVlanCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.4.4 integer read-only
The number of bi-directional connections used in the switch with type
     sfpsConnectionStatsFilterCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.4.5 integer read-only
The number of bi-directional connections used in the switch with type
     sfpsConnectionStatsSelfProgCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.4.6 integer read-only
The number of bi-directional connections used in the switch with type
     sfpsConnectionStatsProvsnedCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.4.7 integer read-only
The number of bi-directional connections used in the switch with type
     sfpsConnectionStatsTapCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.4.8 integer read-only
The number of bi-directional connections used in the switch with type
     sfpsConnectionStatsMcastCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.4.9 integer read-only
The number of bi-directional connections used in the switch with type
     sfpsConnectionStatsNetPortFilterCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.4.10 integer read-only
The number of bi-directional connections used in the switch with type
     sfpsConnectionStatsNonCriticalVlans 1.3.6.1.4.1.52.4.2.4.2.1.3.4.11 integer read-only
Number of non-critical connections - these will be aged first
     sfpsConnectionStatsAddErrors 1.3.6.1.4.1.52.4.2.4.2.1.3.4.12 integer read-only
Number of errors on adding a connnection
     sfpsConnectionStatsDeleteErrors 1.3.6.1.4.1.52.4.2.4.2.1.3.4.13 integer read-only
Number of errors on deleting a connection
     sfpsConnectionQueryAPIVerb 1.3.6.1.4.1.52.4.2.4.2.1.3.5.1 integer read-write
Specifies the action to be initiated as a result of setting this leaf. Enumeration: 'reapCnxsGivenMac': 6, 'mapPort': 4, 'unmapPort': 5, 'add': 2, 'lookup': 1, 'unMapPorts': 8, 'mapPorts': 7, 'delete': 3.
     sfpsConnectionQueryAPIDestAddr 1.3.6.1.4.1.52.4.2.4.2.1.3.5.2 sfpsaddress read-write
Destination MAC address.
     sfpsConnectionQueryAPISourceAddr 1.3.6.1.4.1.52.4.2.4.2.1.3.5.3 sfpsaddress read-write
Source MAC address.
     sfpsConnectionQueryAPIInPort 1.3.6.1.4.1.52.4.2.4.2.1.3.5.4 integer read-write
Source port number.
     sfpsConnectionQueryAPIOutPort 1.3.6.1.4.1.52.4.2.4.2.1.3.5.5 integer read-write
Destination port number.
     sfpsConnectionQueryAPICtrlStatus 1.3.6.1.4.1.52.4.2.4.2.1.3.5.6 integer read-only
Control Status Enumeration: 'other': 1, 'activate': 2, 'under-creation': 4, 'delete': 3.
     sfpsConnectionQueryAPIAdminStatus 1.3.6.1.4.1.52.4.2.4.2.1.3.5.7 integer read-only
Administrative Status. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     sfpsConnectionQueryAPIAge 1.3.6.1.4.1.52.4.2.4.2.1.3.5.8 integer read-only
Age of connection.
     sfpsConnectionQueryAPIQueryType 1.3.6.1.4.1.52.4.2.4.2.1.3.5.9 integer read-write
Type of connection. Enumeration: 'provisioned': 2, 'tap': 7, 'switched': 3, 'self-prog-non-filter': 5, 'netport-filter': 4, 'vlan': 6, 'mcast': 8, 'filter': 1.
     sfpsConnectionQueryAPIOwner 1.3.6.1.4.1.52.4.2.4.2.1.3.5.10 integer read-only
Specifies whether or not Call control is owned by this agent switch. If the call is owned, then the switch will be responsible for releasing the call. This is used mainly when transferring call ownership in call re-routing and in setting up originating calls.
     sfpsConnectionQueryAPIPkts 1.3.6.1.4.1.52.4.2.4.2.1.3.5.11 counter read-only
Number of packets switched on this connection.
     sfpsConnectionQueryAPIBytes 1.3.6.1.4.1.52.4.2.4.2.1.3.5.12 counter read-only
Number of bytes switched on this connection.
     sfpsConnectionQueryAPICanAge 1.3.6.1.4.1.52.4.2.4.2.1.3.5.13 integer read-only
Determine if this connection will be aged - (1) means to age.
     sfpsConnectionQueryAPIOutPorts 1.3.6.1.4.1.52.4.2.4.2.1.3.5.14 displaystring read-write
If OutPorts is 1 - the multiple outports will be displayed in a text format.
     sfpsConnectionQueryAPIMacAddr 1.3.6.1.4.1.52.4.2.4.2.1.3.5.15 sfpsaddress read-write
MAC address.
     sfpsConnectionQueryAPISecInPort 1.3.6.1.4.1.52.4.2.4.2.1.3.5.16 integer read-only
     sfpsConnectionQueryAPISecOutPort 1.3.6.1.4.1.52.4.2.4.2.1.3.5.17 integer read-only
     sfpsConnectionQueryAPISecOutPorts 1.3.6.1.4.1.52.4.2.4.2.1.3.5.18 displaystring read-only
     sfpsConnectionTestAPIVerb 1.3.6.1.4.1.52.4.2.4.2.1.3.6.1 integer read-write
Enumeration: 'fillTable': 1, 'reapCnxsGivenMac': 3, 'reapAllCnxs': 2, 'reapCnxsGivenPort': 4.
     sfpsConnectionTestAPIType 1.3.6.1.4.1.52.4.2.4.2.1.3.6.2 integer read-write
Enumeration: 'provisioned': 2, 'tap': 7, 'switched': 3, 'self-prog-non-filter': 5, 'netport-filter': 4, 'vlan': 6, 'mcast': 8, 'filter': 1.
     sfpsConnectionTestAPINumCnxs 1.3.6.1.4.1.52.4.2.4.2.1.3.6.3 integer read-write
     sfpsConnectionTestAPIMacAddr 1.3.6.1.4.1.52.4.2.4.2.1.3.6.4 sfpsaddress read-write
     sfpsConnectionTestAPIPort 1.3.6.1.4.1.52.4.2.4.2.1.3.6.5 integer read-write
 sfpsAPIVerb 1.3.6.1.4.1.52.4.2.4.2.1.4.1 integer read-write
Specifies the action to be initiated as a result of setting this leaf. Enumeration: 'map': 2, 'unmapall': 4, 'other': 1, 'unmap': 3.
 sfpsAPIInPort 1.3.6.1.4.1.52.4.2.4.2.1.4.2 sfpsswitchport read-write
Specifies the ingress port of the switch.
 sfpsAPIInHeaderType 1.3.6.1.4.1.52.4.2.4.2.1.4.3 integer read-write
Specfies the type of header being mapped. Enumeration: 'atm-vpi-vci': 3, 'other': 1, 'mac-da-sa': 2.
 sfpsAPIInHeaderLength 1.3.6.1.4.1.52.4.2.4.2.1.4.4 integer read-write
Specifies the length of the header value.
 sfpsAPIInHeaderValue 1.3.6.1.4.1.52.4.2.4.2.1.4.5 octet string read-write
Specifies the actual inHeader value for the mapping.
 sfpsAPIOutPort 1.3.6.1.4.1.52.4.2.4.2.1.4.6 sfpsswitchport read-write
Specifies the egress port of the switch.
 sfpsAPIOutHeaderType 1.3.6.1.4.1.52.4.2.4.2.1.4.7 integer read-write
Specfies the type of header being mapped. This value defaults to the value given to sfpsAPIInHeaderType. Enumeration: 'atm-vpi-vci': 3, 'other': 1, 'mac-da-sa': 2.
 sfpsAPIOutHeaderLength 1.3.6.1.4.1.52.4.2.4.2.1.4.8 integer read-write
Specifies the length of the header value. This value defaults to the value given to sfpsAPIInHeaderLength.
 sfpsAPIOutHeaderValue 1.3.6.1.4.1.52.4.2.4.2.1.4.9 octet string read-write
Specifies the actual outHeader value for the mapping. This value defaults to the value given to sfpsAPIInHeaderValue.
 sfpsAPIArgumentDirection 1.3.6.1.4.1.52.4.2.4.2.1.4.10 integer read-write
Specifies the direction of the connection. Enumeration: 'bi-directional': 2, 'other': 1, 'uni-directional': 3.
 sfpsAPIArgumentOwner 1.3.6.1.4.1.52.4.2.4.2.1.4.11 integer read-write
Specifies whether or not callcontrol is owned by this agent switch. If the call is owned, then the switch will be responsible for releasing the call. THis is used mainly when transferring call ownership in call re-routing and in setting up originating calls. Enumeration: 'dont-own-the-call': 3, 'other': 1, 'own-the-call': 2.
 sfpsAPIArgumentPriority 1.3.6.1.4.1.52.4.2.4.2.1.4.12 integer read-write
Specifies the outbound priority of the connection. Enumeration: 'priority-5': 6, 'priority-4': 5, 'other': 1, 'priority-1': 2, 'priority-3': 4, 'priority-2': 3.
 sfpsAPIType 1.3.6.1.4.1.52.4.2.4.2.1.4.13 integer read-write
Sets the type of connection that should be setup. Enumeration: 'filtered': 3, 'provisioned': 4, 'other': 1, 'switched': 2.
   sfpsCNXPacketStatsVer1Tx 1.3.6.1.4.1.52.4.2.4.2.1.15.1 integer read-only
Version 1 transmission
   sfpsCNXPacketStatsVer2Tx 1.3.6.1.4.1.52.4.2.4.2.1.15.2 integer read-only
Version 2 transmission
   sfpsCNXPacketStatsVer1Rx 1.3.6.1.4.1.52.4.2.4.2.1.15.3 integer read-only
Version 1 receive
   sfpsCNXPacketStatsVer2Rx 1.3.6.1.4.1.52.4.2.4.2.1.15.4 integer read-only
Version 2 receive
   sfpsCNXPacketStatsOpCode1Tx 1.3.6.1.4.1.52.4.2.4.2.1.15.5 integer read-only
Operation code 1 transmission
   sfpsCNXPacketStatsOpCode2Tx 1.3.6.1.4.1.52.4.2.4.2.1.15.6 integer read-only
Operation code 2 tranmission
   sfpsCNXPacketStatsOpCode1Rx 1.3.6.1.4.1.52.4.2.4.2.1.15.7 integer read-only
Operation code 1 receive
   sfpsCNXPacketStatsOpCode2Rx 1.3.6.1.4.1.52.4.2.4.2.1.15.8 integer read-only
Operation code 2 receive
   sfpsCNXPacketStatsRxErrors 1.3.6.1.4.1.52.4.2.4.2.1.15.9 integer read-only
Receive errors