CTRON-DLSW-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: CTRON-DLSW-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ctdlswNode 1.3.6.1.4.1.52.4.1.2.8.1
     ctdlswNodeConfig 1.3.6.1.4.1.52.4.1.2.8.1.1
         ctdlswVersion 1.3.6.1.4.1.52.4.1.2.8.1.1.1 displaystring read-only
Indicates the current revision level of the DLSw firmware in textual format.
         ctdlswAdminStatus 1.3.6.1.4.1.52.4.1.2.8.1.1.2 integer read-write
Sets the system-wide administrative state of DLSw services. Enumeration: 'enable': 3, 'other': 1, 'disable': 2.
         ctdlswOperStatus 1.3.6.1.4.1.52.4.1.2.8.1.1.3 integer read-only
Indicates the current system-wide status of DLSw services. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         ctdlswUpTime 1.3.6.1.4.1.52.4.1.2.8.1.1.4 timeticks read-only
Indicates the time (in hundredths of a second) since the DLSw services portion of the system was enabled.
         ctdlswOperVirtualRingNumber 1.3.6.1.4.1.52.4.1.2.8.1.1.5 integer read-write
Specifies the operational ring/segment number that uniquely identifies the virtual segment to which this DLSw is connected. This object may only be modified when ctdlswOperStatus is disabled.
         ctdlswNBLocalFilterType 1.3.6.1.4.1.52.4.1.2.8.1.1.6 integer read-write
Specifies the type of filtering to be applied to NetBIOS frames received on a local LAN segment. If set to block(1), any frame matching any entry in ctdlswNBLocalFilterTable will not be forwarded. If set to pass(2), only frames matching any entry in ctdlswNBLocalFilterTable will be forwarded. Enumeration: 'block': 1, 'pass': 2.
         ctdlswNBRemoteFilterType 1.3.6.1.4.1.52.4.1.2.8.1.1.7 integer read-write
Specifies the type of filtering to be applied to NetBIOS frames received from a remote DLSw partner. If set to block(1), any frame matching any entry in ctdlswNBRemoteFilterTable will not be forwarded. If set to pass(2), only frames matching any entry in ctdlswNBRemoteFilterTable will be forwarded. Enumeration: 'block': 1, 'pass': 2.
         ctdlswMacLocalFilterType 1.3.6.1.4.1.52.4.1.2.8.1.1.8 integer read-write
Specifies the type of address filtering to be applied to SNA MAC frames received on a local LAN segment. If set to block(1), any frame matching any entry in ctdlswMacLocalFilterTable will not be forwarded. If set to pass(2), only frames matching any entry in ctdlswMacLocalFilterTable will be forwarded. Enumeration: 'block': 1, 'pass': 2.
         ctdlswMacRemoteFilterType 1.3.6.1.4.1.52.4.1.2.8.1.1.9 integer read-write
Specifies the type of address filtering to be applied to SNA MAC frames received from a remote DLSw partner. If set to block(1), any frame matching any entry in ctdlswMacRemoteFilterTable will not be forwarded. If set to pass(2), only frames matching any entry in ctdlswMacRemoteFilterTable will be forwarded. Enumeration: 'block': 1, 'pass': 2.
         ctdlswAcceptDynamicTConn 1.3.6.1.4.1.52.4.1.2.8.1.1.10 integer read-write
Specifies whether this DLSw allows unconfigured DLSw partners to establish transport connections. Yes(1) means unconfigured DLSw partners may establish transport connections with this DLSw. No(2) means only user configured DLSw partners may establish transport connections with this DLSw. Enumeration: 'yes': 1, 'no': 2.
         ctdlswDefaultPortNumber 1.3.6.1.4.1.52.4.1.2.8.1.1.11 integer read-write
Specifies the index of the port whose associated IP address will be used to identify this DLSw node to its DLSw partners. The value must be consistent with 'ifIndex' of mib-II.
 ctdlswPort 1.3.6.1.4.1.52.4.1.2.8.2
     ctdlswPortTable 1.3.6.1.4.1.52.4.1.2.8.2.1 no-access
This table contains an entry for each port, and specifies configuration parameters used to establish circuits over that port. This table is indexed by ctdlswPortName, which identifies the port for which an entry exists. These port configuration entries will be provided automatically based on the physical port configuration. These entries cannot be created or deleted - only modified.
         ctdlswPortEntry 1.3.6.1.4.1.52.4.1.2.8.2.1.1 no-access
Each entry specifies configuration parameters for a port for which the entry exists.
             ctdlswPortIndex 1.3.6.1.4.1.52.4.1.2.8.2.1.1.1 integer read-only
Specifies a unique value for each port. Values are derived from 'ifIndex' of mib-II.
             ctdlswPortName 1.3.6.1.4.1.52.4.1.2.8.2.1.1.2 displaystring read-only
Specifies the user friendly name for this port.
             ctdlswPortAddress 1.3.6.1.4.1.52.4.1.2.8.2.1.1.3 macaddress read-only
Specifies the MAC address of this port.
             ctdlswPortAdminStatus 1.3.6.1.4.1.52.4.1.2.8.2.1.1.4 integer read-write
Sets the administrative state of DLSw frame forwarding for this port. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             ctdlswPortOperStatus 1.3.6.1.4.1.52.4.1.2.8.2.1.1.5 integer read-only
Specifies the current operating status of DLSw frame forwarding for this port. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             ctdlswPortUpTime 1.3.6.1.4.1.52.4.1.2.8.2.1.1.6 timeticks read-only
Indicates the time (in hundredths of a second) since this port was enabled. A value of zero means this port is not presently enabled.
 ctdlswFilter 1.3.6.1.4.1.52.4.1.2.8.3
     ctdlswLocalNBFilterTable 1.3.6.1.4.1.52.4.1.2.8.3.1 no-access
A list of NETBIOS source-destination name pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from locally generated NetBIOS frames are compared against entries in this table.
         ctdlswLocalNBFilterEntry 1.3.6.1.4.1.52.4.1.2.8.3.1.1 no-access
Information for one NetBIOS source-destination name pair.
             ctdlswLocalNBFilterSrcName 1.3.6.1.4.1.52.4.1.2.8.3.1.1.1 nbname read-only
The source NETBIOS name to filter on.
             ctdlswLocalNBFilterDestName 1.3.6.1.4.1.52.4.1.2.8.3.1.1.2 nbname read-only
The destination NETBIOS NAME to filter on.
             ctdlswLocalNBFilterControl 1.3.6.1.4.1.52.4.1.2.8.3.1.1.3 integer read-write
Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1). Enumeration: 'create': 2, 'other': 1, 'delete': 3.
     ctdlswRemoteNBFilterTable 1.3.6.1.4.1.52.4.1.2.8.3.2 no-access
A list of NETBIOS source-destination name pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from NetBIOS frames received from remote DLSw partners are compared against entries in this table.
         ctdlswRemoteNBFilterEntry 1.3.6.1.4.1.52.4.1.2.8.3.2.1 no-access
Information for one NetBIOS source-destination name pair.
             ctdlswRemoteNBFilterSrcName 1.3.6.1.4.1.52.4.1.2.8.3.2.1.1 nbname read-only
The source NETBIOS name to filter on.
             ctdlswRemoteNBFilterDestName 1.3.6.1.4.1.52.4.1.2.8.3.2.1.2 nbname read-only
The destination NETBIOS name to filter on.
             ctdlswRemoteNBFilterControl 1.3.6.1.4.1.52.4.1.2.8.3.2.1.3 integer read-write
Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1). Enumeration: 'create': 2, 'other': 1, 'delete': 3.
     ctdlswLocalMacFilterTable 1.3.6.1.4.1.52.4.1.2.8.3.3 no-access
A list of source-destination MAC address pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from locally generated SNA MAC frames are compared against entries in this table.
         ctdlswLocalMacFilterEntry 1.3.6.1.4.1.52.4.1.2.8.3.3.1 no-access
Information for one source-destination MAC address pair.
             ctdlswLocalMacFilterSrcAddr 1.3.6.1.4.1.52.4.1.2.8.3.3.1.1 macaddress read-only
The source MAC Address to filter on.
             ctdlswLocalMacFilterSrcMask 1.3.6.1.4.1.52.4.1.2.8.3.3.1.2 macaddress read-only
The source MAC Address mask to filter on.
             ctdlswLocalMacFilterDestAddr 1.3.6.1.4.1.52.4.1.2.8.3.3.1.3 macaddress read-only
The destination MAC Address to filter on.
             ctdlswLocalMacFilterDestMask 1.3.6.1.4.1.52.4.1.2.8.3.3.1.4 macaddress read-only
The destination MAC Address mask to filter on.
             ctdlswLocalMacFilterControl 1.3.6.1.4.1.52.4.1.2.8.3.3.1.5 integer read-write
Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1). Enumeration: 'create': 2, 'other': 1, 'delete': 3.
     ctdlswRemoteMacFilterTable 1.3.6.1.4.1.52.4.1.2.8.3.4 no-access
A list of source-destination MAC address pairs whose frames are allowed (or not allowed) to be forwarded via this DLSw. Only source-destination name pairs from SNA MAC frames received from remote DLSw partners are compared against entries in this table.
         ctdlswRemoteMacFilterEntry 1.3.6.1.4.1.52.4.1.2.8.3.4.1 no-access
Information for one source-destination MAC address pair.
             ctdlswRemoteMacFilterSrcAddr 1.3.6.1.4.1.52.4.1.2.8.3.4.1.1 macaddress read-only
The source MAC Address to filter on.
             ctdlswRemoteMacFilterSrcMask 1.3.6.1.4.1.52.4.1.2.8.3.4.1.2 macaddress read-only
The source MAC Address mask to filter on.
             ctdlswRemoteMacFilterDestAddr 1.3.6.1.4.1.52.4.1.2.8.3.4.1.3 macaddress read-only
The destination MAC Address to filter on.
             ctdlswRemoteMacFilterDestMask 1.3.6.1.4.1.52.4.1.2.8.3.4.1.4 macaddress read-only
The destination MAC Address mask to filter on.
             ctdlswRemoteMacFilterControl 1.3.6.1.4.1.52.4.1.2.8.3.4.1.5 integer read-write
Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1). Enumeration: 'create': 2, 'other': 1, 'delete': 3.
 ctdlswTConn 1.3.6.1.4.1.52.4.1.2.8.4
     ctdlswTConnTable 1.3.6.1.4.1.52.4.1.2.8.4.1 no-access
A list of transport connections which are either user defined or dynamically created for this DLSw.
         ctdlswTConnEntry 1.3.6.1.4.1.52.4.1.2.8.4.1.1 no-access
             ctdlswTConnRemoteTAddr 1.3.6.1.4.1.52.4.1.2.8.4.1.1.1 ipaddress read-only
Specifies the remote transport address for this transport connection. It can be defined by the user, or established dynamically upon receiving a connection setup request from another DLSw.
             ctdlswTConnControl 1.3.6.1.4.1.52.4.1.2.8.4.1.1.2 integer read-write
Set this object to delete(3) to remove this entry. Set to create(2) to add this entry. A get of this object will return other(1). Enumeration: 'create': 2, 'other': 1, 'delete': 3.
             ctdlswTConnUpTime 1.3.6.1.4.1.52.4.1.2.8.4.1.1.3 timeticks read-only
Indicates the time (in hundredths of a second) since this transport connection was last established. A value of zero means this transport connection is not presently established.
             ctdlswTConnOperStatus 1.3.6.1.4.1.52.4.1.2.8.4.1.1.4 integer read-only
Indicates the status of this transport connection. Enumeration: 'disabled': 2, 'pendingDisable': 4, 'other': 1, 'enabled': 3, 'pendingEnable': 5.
             ctdlswTConnType 1.3.6.1.4.1.52.4.1.2.8.4.1.1.5 integer read-only
Indicates the means by which this transport connection was determined. Configured(1) means this entry was user defined. Dynamic(2) means this entry was not user defined but was created as a result of a connection initiated by another DLSw. Enumeration: 'configured': 1, 'dynamic': 2.
 ctdlswTrap 1.3.6.1.4.1.52.4.1.2.8.5
 ctdlswEvent 1.3.6.1.4.1.52.4.1.2.8.6
     ctdlswEventLogConfig 1.3.6.1.4.1.52.4.1.2.8.6.1
         ctdlswEventAdminStatus 1.3.6.1.4.1.52.4.1.2.8.6.1.1 integer read-write
Set the administrative state of Data Link Switching event logging. enabled(3) causes the event log to become active. disabled(2) causes the event log to become inactive. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
         ctdlswEventMaxEntries 1.3.6.1.4.1.52.4.1.2.8.6.1.2 integer read-write
Sets the maximum number of entries allowed in the event log table. When the number of entries reaches the value of ctdlswEventMaxEntries the first (oldest) entry is deleted to allow a new entry to be added.
         ctdlswEventTraceAll 1.3.6.1.4.1.52.4.1.2.8.6.1.3 integer read-write
enabled(3) allows logging of all event types. disabled(2) causes the event log filter table to specify which events to log. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     ctdlswEventLogFilterTable 1.3.6.1.4.1.52.4.1.2.8.6.2
         ctdlswEventFilterTable 1.3.6.1.4.1.52.4.1.2.8.6.2.1 no-access
This table contains descriptions of how to filter log entries.
             ctdlswEventFilterEntry 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1 no-access
Each entry specifies the filter for log entries. The instance ctdlswEventProtocol refers to the instance used in the nwRtgProtocolTable and nwComponentTable specified by the ctrouter-mib.txt.
                 ctdlswEventFltrProtocol 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.1 integer read-only
Selects the protocol to log events from.
                 ctdlswEventFltrIfNum 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.2 integer read-only
Specifies the port on which to log events.
                 ctdlswEventFltrControl 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.3 integer read-write
Setting this field to delete will allow entries to be removed from the table. This is done by adding new entries with instance fields that match the entry to be removed from the table. The new entry being added must have this control field set to delete in order for the matching entry already in the table to be deleted. Setting this field to add will add the entry to the table. Enumeration: 'add': 3, 'other': 1, 'delete': 2.
                 ctdlswEventFltrType 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.4 integer read-write
This bit field mask filter will allow only events of certain types to be logged. By default all types will be logged. Clearing event types from this field will cause those types not to be logged. Adding event types to this field will enable those types to be logged. Enumeration: 'xmit': 8, 'rcv': 4, 'misc': 1, 'timer': 2, 'error': 32, 'event': 16.
                 ctdlswEventFltrSeverity 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.5 integer read-write
This filter controls the amount of logging by ignoring events of lower priority than that specified by the filter value. Specifying highest(1) causes all events except those of highest severity to be ignored. Specifying highmed(2) causes lowest severity events to be ignored. Specifying highlow(3) causes all events to be logged. highmed(2) is the default setting. Enumeration: 'highmed': 2, 'highest': 1, 'highlow': 3.
                 ctdlswEventFltrAction 1.3.6.1.4.1.52.4.1.2.8.6.2.1.1.6 integer read-write
This field specifies how the events are to be logged. Specifying log(1) stores the events in the event log table (defined below). Specifying trap(2) sends events out through the trap mechanism. Specifying logTrap(3) does both. Enumeration: 'logTrap': 3, 'log': 1, 'trap': 2.
     ctdlswEventLogTable 1.3.6.1.4.1.52.4.1.2.8.6.3
         ctdlswEventTable 1.3.6.1.4.1.52.4.1.2.8.6.3.1 no-access
This table contains all events that have been logged.
             ctdlswEventEntry 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1 no-access
Each entry specifies events that have been logged.
                 ctdlswEventNumber 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.1 integer read-only
The number uniquely identifies events.
                 ctdlswEventTime 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.2 timeticks read-only
This number specifies when the event was logged.
                 ctdlswEventType 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.3 integer read-only
Specifies type of event logged. Enumeration: 'xmit': 8, 'rcv': 4, 'misc': 1, 'timer': 2, 'error': 32, 'event': 16.
                 ctdlswEventSeverity 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.4 integer read-only
Specifies the severity of the event logged. Enumeration: 'highmed': 2, 'highest': 1, 'highlow': 3.
                 ctdlswEventProtocol 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.5 integer read-only
Specifies the protocol where the event occured.
                 ctdlswEventIfNum 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.6 integer read-only
Specifies the port the event occurred on.
                 ctdlswEventTextString 1.3.6.1.4.1.52.4.1.2.8.6.3.1.1.7 octet string read-only
Specifies the actual text string to be logged.