CTRON-COMMON-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: CTRON-COMMON-MIB
Download as:   
IRM-OIDS, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 deviceType 1.3.6.1.4.1.52.1.1.1.1 integer read-only
The type of management board. Enumeration: 'mrxi24': 65569, 'iRBM': 177, 'mrxi38': 65572, 'emm-E': 185, 'mrxi22': 65570, 'mrxi34': 65571, 'trmMim': 190, 'tRMBM-R': 179, 'tRMBM-S': 180, 'other': 1, 'iRM2': 176, 'iRM3': 178, 'tRMM': 187.
 deviceName 1.3.6.1.4.1.52.1.1.1.2 displaystring read-write
A textual description on the entity managed by the resident agent. It is mandatory that this only con- tain printable ASCII characters.
 deviceIPAddress 1.3.6.1.4.1.52.1.1.1.3 ipaddress read-write
The Network address, in this case the IP address, of the device. This object is required for use by the Local Management Interface.
 deviceTime 1.3.6.1.4.1.52.1.1.1.4 displaystring read-write
The current time of day, in 24 hour format, as measured by the device. The representation shall use the standard HHMMSS format.
 deviceDate 1.3.6.1.4.1.52.1.1.1.5 displaystring read-write
The current date, as measured by the device. The representation shall use the standard MMDDYYYY format.
 fnb2 1.3.6.1.4.1.52.1.6.1.2
     fnbTR 1.3.6.1.4.1.52.1.6.1.2.1
         fnbTRTable 1.3.6.1.4.1.52.1.6.1.2.1.1 no-access
A list of entries that provide connection status of Token Ring subsystems, for the FNB.
             fnbTREntry 1.3.6.1.4.1.52.1.6.1.2.1.1.1 no-access
An entry in the fnbTRTable containing objects that provide FNB connection status for a Token Ring sub- system.
                 fnbTRIndex 1.3.6.1.4.1.52.1.6.1.2.1.1.1.1 integer read-only
An unique value for each Token Ring subsystem. Its value ranges between 1 and chassisSlots. The value for each interface must remain constant, at least, from one re-initialization of the entity's network management system to the next re-initialization.
                 fnbConnectLeft 1.3.6.1.4.1.52.1.6.1.2.1.1.1.2 integer read-write
The Connected Left board (board n + 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write). Faulted == 3 (Management/AutoMode tried to attach but failed READ ONLY). Enumeration: 'faulted': 3, 'detached': 1, 'attached': 2.
                 fnbConnectRight 1.3.6.1.4.1.52.1.6.1.2.1.1.1.3 integer read-write
The Connected Right board (board n - 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write ). Faulted == 3 (Management/AutoMode tried to attach but failed, READ ONLY). Enumeration: 'faulted': 3, 'detached': 1, 'attached': 2.
                 fnbBypass 1.3.6.1.4.1.52.1.6.1.2.1.1.1.4 integer read-write
Denotes the bypass status of the current Token Ring board. Bypassed means the board is NOT attached to the FNB. Enumeration: 'on': 2, 'off': 1.
                 fnbRPBypass 1.3.6.1.4.1.52.1.6.1.2.1.1.1.5 integer read-write
Denotes the Ring Port bypass status of the current Token Ring board. If this capability is not available on this board, the value 'other' is returned when read, and BADSETINFO when written. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
     fnbCSMACD 1.3.6.1.4.1.52.1.6.1.2.2
         fnbCSMACDTable 1.3.6.1.4.1.52.1.6.1.2.2.1 no-access
A list of entries that provide connection status of CSMA/CD subsystems, for the FNB.
             fnbCSMACDEntry 1.3.6.1.4.1.52.1.6.1.2.2.1.1 no-access
An entry in the fnbCSMACDTable containing objects that provide FNB connection status for a CSMA/CD subsystem.
                 fnbCSMACDIndex 1.3.6.1.4.1.52.1.6.1.2.2.1.1.1 integer read-write
An unique value for each CSMACD subsystem. Its value ranges between 1 and chassisSlots. The value for each interface must remain constant, at least, from one re-initialization of the entity's network management system to the next re-initialization.
                 fnbConnect 1.3.6.1.4.1.52.1.6.1.2.2.1.1.2 integer read-write
Denotes the connection status of the CSMA/CD board to the inter-RIC bus. Enumeration: 'multiChannel': 7, 'disconnect': 3, 'subnetB': 5, 'subnetC': 6, 'frontPanel': 8, 'connectB': 1, 'connectC': 2, 'connectA': 4.
                 fnbPortChanges 1.3.6.1.4.1.52.1.6.1.2.2.1.1.3 counter read-only
Denotes the number of times any port on the given MIM has changed it's connection to the inter-RIC bus.
     fnbPortConnect 1.3.6.1.4.1.52.1.6.1.2.3
         fnbPortConnectTable 1.3.6.1.4.1.52.1.6.1.2.3.1 no-access
This table is used to control port association on ethernet devices. Only those boards that support port switching will be listed in this table.
             fnbPortConnectEntry 1.3.6.1.4.1.52.1.6.1.2.3.1.1 no-access
Describes a specific port connection entry.
                 fnbPortConnectBoardIndex 1.3.6.1.4.1.52.1.6.1.2.3.1.1.1 integer read-only
An instance of a board for which this port assignment relationship exists.
                 fnbPortConnectPortIndex 1.3.6.1.4.1.52.1.6.1.2.3.1.1.2 integer read-only
An instance of a port for which this assignment relationship exists.
                 fnbPortConnectPortAssignment 1.3.6.1.4.1.52.1.6.1.2.3.1.1.3 integer read-write
The specific channel that the port is assigned. Enumeration: 'connectB': 2, 'connectC': 3, 'connectA': 1.
                 fnbPortConnectCompID 1.3.6.1.4.1.52.1.6.1.2.3.1.1.4 integer read-only
This is the component ID as defined in the chassis MIB that this port is associated with. These components will be repeater components.
         fnbPortConnectionChanges 1.3.6.1.4.1.52.1.6.1.2.3.2 counter read-only
Maintains the number of times any port within the mangement domain of this MIM changes it's port assignment.
 chassis 1.3.6.1.4.1.52.1.6.1.3
     chassisHWRev 1.3.6.1.4.1.52.1.6.1.3.1 integer read-only
Define the hardware revision of the device or sys- tem chassis.
     chassisType 1.3.6.1.4.1.52.1.6.1.3.2 integer read-only
Denotes the type of chassis. Enumeration: 'mMAC8FNB': 2, 'mMAC3FNB': 4, 'mMAC8FNBS': 13, 'mMAC5FNB': 3, 'm8FNBS': 14, 'mINIMMAC': 5, 'nonFNB': 10, 'other': 1, 'm3FNB': 7, 'mMAC3FNBS': 11, 'mMAC5FNBS': 12, 'mRXI': 6, 'm8FNB': 9, 'm5FNB': 8.
     chassisSlots 1.3.6.1.4.1.52.1.6.1.3.3 integer read-only
Denotes the number of available chassis slots.
     chassisFNB 1.3.6.1.4.1.52.1.6.1.3.4 integer read-only
Denotes the presence or absence of the FNB. Enumeration: 'absent': 1, 'present': 2.
     chassisAlarmEna 1.3.6.1.4.1.52.1.6.1.3.5 integer read-write
Allow an audible alarm to be either enabled or dis- abled. Enumeration: 'enable': 2, 'disable': 1.
     chassisAlarmState 1.3.6.1.4.1.52.1.6.1.3.6 integer read-write
Denotes the current condition of the power supply fault detection circuit. Setting a value of chassisNoFaultCondition(1) disables the current chassis alarm condition, and stops the current audible alarm from sounding. Setting a value of chassisFaultCondition(2) is not allowed. This object will read with the value of chassisNoFaultCondition(1) when the chassis is currently operating with no power faults detected. This object will read with the value of chassisFaultCondition(2) when the chassis is currently in a power fault condition. Enumeration: 'chassisFaultCondition': 2, 'chassisNoFaultCondition': 1.
 environment 1.3.6.1.4.1.52.1.6.1.4
     powerTable 1.3.6.1.4.1.52.1.6.1.4.1 no-access
A list of power supply entries.
         powerEntry 1.3.6.1.4.1.52.1.6.1.4.1.1 no-access
An entry in the powerTable providing objects for a power supply.
             powerSupplyNum 1.3.6.1.4.1.52.1.6.1.4.1.1.1 integer read-only
Denotes the power supply that may have failed.
             powerSupplyState 1.3.6.1.4.1.52.1.6.1.4.1.1.2 integer read-only
Denotes the power supply's state. Enumeration: 'infoNotAvailable': 1, 'installedAndNotOperating': 4, 'notInstalled': 2, 'installedAndOperating': 3.
             powerSupplyId 1.3.6.1.4.1.52.1.6.1.4.1.1.3 object identifier read-only
Identifies the type of power supply. For example, this could be used to identify power supplies which support additional remote management capabilities.
             powerSupplyRedun 1.3.6.1.4.1.52.1.6.1.4.1.1.4 integer read-only
Identifies whether power redundancy is available within the chassis. Devices that do not support power supply redundancy, will return infoNotAvailable. Enumeration: 'infoNotAvailable': 3, 'redundancyNotAvail': 2, 'redundancyAvail': 1.
             powerSupplyRemoteDisable 1.3.6.1.4.1.52.1.6.1.4.1.1.5 integer read-write
Provides Enable/Disable control of the power supply. For devices that do not support this capability, a set attempt will return BADVALUE, and a read will always return infoNotAvailable. Enumeration: 'infoNotAvailable': 3, 'enable': 1, 'disable': 2.
 nB55 1.3.6.1.4.1.52.1.6.2.3
     nB55HWAddress 1.3.6.1.4.1.52.1.6.2.3.1 physaddress read-only
The device's MAC address.
     nB55HWRev 1.3.6.1.4.1.52.1.6.2.3.2 integer read-only
Denotes the revision of the nB55 board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on.
     nB55FWRev 1.3.6.1.4.1.52.1.6.2.3.3 octet string read-only
Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision.
 mRXI 1.3.6.1.4.1.52.1.6.2.6
     mRXIHWAddress 1.3.6.1.4.1.52.1.6.2.6.1 physaddress read-only
The device's MAC address.
     mRXIHWRev 1.3.6.1.4.1.52.1.6.2.6.2 integer read-only
Denotes the revision of the mRXI board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on.
     mRXIFWRev 1.3.6.1.4.1.52.1.6.2.6.3 octet string read-only
Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision.
 iRM3 1.3.6.1.4.1.52.1.6.2.7
     iRM3HWAddress 1.3.6.1.4.1.52.1.6.2.7.1 physaddress read-only
The device's MAC address.
     iRM3HWRev 1.3.6.1.4.1.52.1.6.2.7.2 integer read-only
Denotes the revision of the IRM3 board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on.
     iRM3FWRev 1.3.6.1.4.1.52.1.6.2.7.3 octet string read-only
Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision.
     iRM3PortAssoc 1.3.6.1.4.1.52.1.6.2.7.4 integer read-write
Controls how front panel ports are associated with the Irm3. Enumeration: 'arpFoff': 6, 'aoffFrp': 5.
     iRM3BPSupport 1.3.6.1.4.1.52.1.6.2.7.5 integer read-only
Denotes whether or not Backplane Protocol Support is present in the current version of the IRM3. Enumeration: 'supported': 2, 'notSupported': 1.
 tRMM 1.3.6.1.4.1.52.1.6.2.8
     tRMMHWAddress 1.3.6.1.4.1.52.1.6.2.8.1 physaddress read-only
The device's MAC address.
     tRMMHWRev 1.3.6.1.4.1.52.1.6.2.8.2 integer read-only
Denotes the revision of the tRMM board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on.
     tRMMFWRev 1.3.6.1.4.1.52.1.6.2.8.3 octet string read-only
Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision.
 eMME 1.3.6.1.4.1.52.1.6.2.9
     eMMEHWAddress 1.3.6.1.4.1.52.1.6.2.9.1 physaddress read-only
The device's MAC address.
     eMMEHWRev 1.3.6.1.4.1.52.1.6.2.9.2 integer read-only
Denotes the revision of the eMME board. A value of one denotes Revision 1, a value of two denotes Revi- sion 2, and so on.
     eMMEFWRev 1.3.6.1.4.1.52.1.6.2.9.3 octet string read-only
Denotes the revision of firmware in the module. The first octets provides the version, and the second provides the revision.
     eMMEBoardMap 1.3.6.1.4.1.52.1.6.2.9.4 integer read-only
Denotes a bit encoded representation of the slots that contain MIM boards. If a bit is a one then the board is present.
 fPRedundancy 1.3.6.1.4.1.52.1.6.2.10
       fPRedund 1.3.6.1.4.1.52.1.6.2.10.1
           fPRedundReset 1.3.6.1.4.1.52.1.6.2.10.1.1 integer read-write
If this object is set to Reset it will cause a reset of the front panel redundancy. Setting this object to NoReset will do nothing. This object will always be read as NoReset. Enumeration: 'reset': 2, 'noReset': 1.
           fPRedundPollInterval 1.3.6.1.4.1.52.1.6.2.10.1.2 integer read-write
Get/Set the number of seconds between polls for front panel redundancy.
           fPRedundRetrys 1.3.6.1.4.1.52.1.6.2.10.1.3 integer read-write
Get/Set the the number of unanswered polls allowed for the front panel redundancy before it switches ports.
           fPRedundNumAddr 1.3.6.1.4.1.52.1.6.2.10.1.4 integer read-only
Get the number of IP Addresses associated with front panel redundancy.
           fPRedundAddAddr 1.3.6.1.4.1.52.1.6.2.10.1.5 ipaddress read-write
Add an IP Address to the polling list for the front panel redundancy.
           fPRedundDelAddr 1.3.6.1.4.1.52.1.6.2.10.1.6 ipaddress read-write
Delete an IP Address from the polling list for the front panel redundancy.
           fPRedundActivePort 1.3.6.1.4.1.52.1.6.2.10.1.7 integer read-write
Get/Set the front panel port you want to be active when front panel redundancy is enabled.
           fPRedundEnable 1.3.6.1.4.1.52.1.6.2.10.1.8 integer read-write
If this object is set to enable, the front panel redundancy will be activated. If this object is set to disable, the front panel redundancy will be deactivated. When read, this object will returns the state of the object based on the last request made. Enumeration: 'enable': 2, 'disable': 1.
       fPRedundAddrTable 1.3.6.1.4.1.52.1.6.2.10.2 no-access
A list of entries that provide IP address information for front panel redundancy.
           fPRedundAddrEntry 1.3.6.1.4.1.52.1.6.2.10.2.1 no-access
An entry in the fPRedundAddrTable providing objects for front panel redundancy.
               fPRedundAddrId 1.3.6.1.4.1.52.1.6.2.10.2.1.1 integer read-only
A unique value identifying an element in a sequence of member IP Addresses which belong to the front panel redundancy. This value goes from 1 to the maximum number of IP Addresses which may be included in front panel redundancy.
               fPRedundAddrIPAddr 1.3.6.1.4.1.52.1.6.2.10.2.1.2 ipaddress read-only
Returns an IP Address associated with the front panel redundancy.
 upsVersion 1.3.6.1.4.1.52.1.6.3.1
     upsRevision 1.3.6.1.4.1.52.1.6.3.1.1
         upsID 1.3.6.1.4.1.52.1.6.3.1.1.1 integer read-write
Denotes a type code which refers to the manufactur- ers and model of the UPS. Enumeration: 'aPCModel370': 257, 'aPCModel900': 260, 'aPCModel600': 259, 'other': 1, 'aPCModel2000': 262, 'aPCModel400': 258, 'aPCModel1250': 261.
         upsUpTime 1.3.6.1.4.1.52.1.6.3.1.1.2 integer read-only
Denotes the operating time, in hours, since the UPS was last powered on.
         upsDisable 1.3.6.1.4.1.52.1.6.3.1.1.3 integer read-write
Allows the UPS to be disabled. A set turns of the UPS for those systems, so equipped. A get/get-next always returns 0.
         upsDisconnect 1.3.6.1.4.1.52.1.6.3.1.1.4 integer read-write
Allows the UPS backup power system to conserve its battery. Setting the object to a value of 1 turns off the power system. A get/get-next always retuns a 0.
         upsTest 1.3.6.1.4.1.52.1.6.3.1.1.5 integer read-write
Denotes the status performed on the UPS. A write unitOK(1) intiates the test. A read indicates status of test. Enumeration: 'badBattery': 3, 'underTest': 5, 'noRecentTest': 4, 'unitOK': 1, 'unitFailed': 2.
         upsBatteryCapacity 1.3.6.1.4.1.52.1.6.3.1.1.6 integer read-only
Denotes the percentage of battery capacity left, 100% being a fully-charged battery.
         upsACLineVoltsIn 1.3.6.1.4.1.52.1.6.3.1.1.7 integer read-only
Denotes the input AC utility line voltage.
         upsBatteryVoltsOut 1.3.6.1.4.1.52.1.6.3.1.1.8 integer read-only
Denotes the battery voltage.
 dlForceOnBoot 1.3.6.1.4.1.52.1.6.4.1 integer read-write
When set to a 1, the system will request a download, during the next system restart. If no server is found and the current image in flash memory is valid, the system will boot using the flash-resident image.
 dlCommitRAMToFlash 1.3.6.1.4.1.52.1.6.4.2 integer read-write
When written with a 1, the boot software will erase flash memory, compress the downloaded code, and save the compressed image into flash memory. Upon com- pletion of this operation, the flash memory driver resets this object to 0, indicating completion of the programming operation.
 dlInitiateColdBoot 1.3.6.1.4.1.52.1.6.4.3 integer read-write
When written with a 1, the boot software intiates a system reboot. All MIB variables used to control the exact nature of the download should be set, prior to activating a system reset. A read always returns a 0.
 dlTFTPRequestHost 1.3.6.1.4.1.52.1.6.4.4 ipaddress read-write
The IP address of the server to be used, when firmware is to be loaded across the network.
 dlTFTPRequest 1.3.6.1.4.1.52.1.6.4.5 displaystring read-write
The filename requested of the server, when firmware is to be loaded across the network.
 dlLastImageFilename 1.3.6.1.4.1.52.1.6.4.6 displaystring read-only
Filename of the last image to be successfully loaded into memory.
 dlLastServerIPAddress 1.3.6.1.4.1.52.1.6.4.7 ipaddress read-only
The IP address of the server used to load the present image in flash memory.
 dlFlashSize 1.3.6.1.4.1.52.1.6.4.8 integer read-only
Denotes the size, in bytes, of flash memory con- tained on this module.
 dlFlashCount 1.3.6.1.4.1.52.1.6.4.9 integer read-only
Denotes the number of times that flash memory has been reprogrammed. This value is initialzed to 1, when the module is initially powered up.
 dlFirmwareBase 1.3.6.1.4.1.52.1.6.4.10 integer read-only
Denotes the starting address of the firmware in RAM.
 dlFirmwareTop 1.3.6.1.4.1.52.1.6.4.11 integer read-only
Denotes the ending address of firmware in RAM.
 dlFirmwareStart 1.3.6.1.4.1.52.1.6.4.12 integer read-only
Denotes the start address of the firmware, in RAM, as established by the boot process.
 dlBootRev 1.3.6.1.4.1.52.1.6.4.13 octet string read-only
Denotes the revision of boot firmware in the module. The first octets provides the version, and the second provides the revision.
 dlForceBootp 1.3.6.1.4.1.52.1.6.4.14 integer read-write
When set, this variable forces the client to send a BOOTP request packet when rebooting. The client will make several attempts before timing out if a server does not respond. This variable stays set. When set to a 1 it should always be read as a one. When set to zero it should always be read as zero.
 dlServerName 1.3.6.1.4.1.52.1.6.4.15 octet string read-write
This OID is reserved for future use of the Bootp server name. This field can be used when a client wants to get boot information from a particular bootp server.
 dlOnLineDownLoad 1.3.6.1.4.1.52.1.6.4.16 integer read-write
During normal operation this object has the value of 1. By setting this object to a value of forceDownLoad(2) an online download will be performed. By setting this object to a value of forceDownLoadReset(3) an online down load will be performed and a reset will be forced upon successful completion of the download. Enumeration: 'forceDownLoad': 2, 'forceDownLoadReset': 3, 'normalOperation': 1.
 dlOperStatus 1.3.6.1.4.1.52.1.6.4.17 integer read-only
This object reflects the status of the download code. A value of normalOperation(3) reflects either a down load was started but has finished normally and no reset was specified or no down load has been started. A value of downLoadActive only appears while a down load is in progress. A value of downLoadCompleteError reflects that a down load was started however an error was detected. Enumeration: 'downLoadActive': 4, 'unknown': 2, 'other': 1, 'downLoadCompleteError': 5, 'normalOperation': 3.
 dlNetAddress 1.3.6.1.4.1.52.1.6.4.18 ipaddress read-write
IP Address of the server to be used when an image is to be downloaded using the Runtime TFTP Download.
 dlFileName 1.3.6.1.4.1.52.1.6.4.19 octet string read-write
Filename requested of the server when an image is to be downloaded using the Runtime TFTP Download. This should be a complete path filename.
 dlErrorString 1.3.6.1.4.1.52.1.6.4.20 displaystring read-only
If the value of ctDLOperStatus is downloadCompleteError(5) then this object will provide a more complete description of the error. Otherwise this object will be the zero length string.
 dlTftpServerGatewayIPAddress 1.3.6.1.4.1.52.1.6.4.21 ipaddress read-write
The IP address of the gateway/router which connects this SNMP agent to the TFTP server.