CTRON-AP3000-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: CTRON-AP3000-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, IF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cabletron 1.3.6.1.4.1.52
       mibs 1.3.6.1.4.1.52.4
           ctronAP3000 1.3.6.1.4.1.52.4.13
This mib module defines a portion of the SNMP enterprise MIBs under Enterasys Networks enterprise OID as an extension to the Enterasys AP3000 MIB. This Enterasys Networks Proprietary MIB was designed to be used for read-write access to configuration objects in AP3000.
                 comPortMgnt 1.3.6.1.4.1.52.4.13.1
                     comPortControl 1.3.6.1.4.1.52.4.13.1.1 integer read-write
The administrative enable/disable state for COM Port Control in a System. Enumeration: 'disabled': 2, 'enabled': 1.
                 macFilterMgnt 1.3.6.1.4.1.52.4.13.2
                     macFilterTable 1.3.6.1.4.1.52.4.13.2.1 no-access
Table of status information about each configured MAC Filtering Entry.
                         macFilterEntry 1.3.6.1.4.1.52.4.13.2.1.1 no-access
An entry in the table, containing information about configuration of MAC Filter.
                             macFilterIndex 1.3.6.1.4.1.52.4.13.2.1.1.1 integer32 no-access
Filter index.
                             macFilterAddress 1.3.6.1.4.1.52.4.13.2.1.1.2 macaddress read-write
This values indicates the MAC address of the MAC Filter entry.
                             macFilterAllowedToGo 1.3.6.1.4.1.52.4.13.2.1.1.3 integer read-write
The administrative allow/deny state for that specified MAC Filter Entry. Enumeration: 'deny': 2, 'allow': 1.
                             macFilterOpeStatus 1.3.6.1.4.1.52.4.13.2.1.1.4 integer read-only
This object indicates the status of this entry. other(0) - this entry is currently in use but the conditions under which it will remain so differ from the following values. valid(1) - this value to indicate this entry is currently in used. invalid(2) - write this value to the corresponding entry, the whole entry will be removed. Since the order of entry shall be re-order while it has been deleted. To re-freshed the whole table is recommended for new index. create(3) - write this value to indicate that the new MAC address will be added after next writing MAC address to that new entry. The adding action will be taken on the index that grater than 1. Enumeration: 'create': 3, 'other': 0, 'valid': 1, 'invalid': 2.
                     apMacFilterControl 1.3.6.1.4.1.52.4.13.2.2 integer read-write
This value indicates the control of the MAC filter setting. Enumeration: 'disabled': 2, 'enabled': 1.
                     apvMacFilterOperateTable 1.3.6.1.4.1.52.4.13.2.3 no-access
The Table used to manage the function in MAC Filter Table.
                         apvMacFilterOperateEntry 1.3.6.1.4.1.52.4.13.2.3.1 no-access
An entry in the table, containing information about configuration in one VAP of the AP.
                             apvMacFilterPermission 1.3.6.1.4.1.52.4.13.2.3.1.1 integer read-write
This values indicates the Permission on all the active filter entry for each Vap. The negative permission will be applied on any inactive entry or any MAC that is not in the table. Enumeration: 'denied': 2, 'allowed': 1.
                             apvMacFilterAddressToAdd 1.3.6.1.4.1.52.4.13.2.3.1.2 octet string read-write
This values indicates the MAC address to be added to the local MAC filter table as an active entry for each Vap.
                     apvMacFilterTable 1.3.6.1.4.1.52.4.13.2.4 no-access
Table of status information about each configured MAC Address Filtering Entry.
                         apvMacFilterEntry 1.3.6.1.4.1.52.4.13.2.4.1 no-access
An entry in the table, containing information about configuration in one radio of the AP. MacFilterEntry is created and managed using localMACFilterMgnt Table.
                             apvMacFilterIndex 1.3.6.1.4.1.52.4.13.2.4.1.1 integer32 no-access
MAC Filter index in each VAP.
                             apvMacFilterAddress 1.3.6.1.4.1.52.4.13.2.4.1.2 macaddress read-only
This values indicates the MAC address of the filter entry.
                             apvMacFilterActivity 1.3.6.1.4.1.52.4.13.2.4.1.3 integer read-write
This value indicates the Activity of the MAC table entry by the filter permission. If allow(1), the filter permission will be applied to the MAC address. If denied(2), the filter permission will not be applied to the MAC address. If delete_entry(3), the filter entry will be deleted. Enumeration: 'deleteEntry': 3, 'allow': 1, 'denied': 2.
                 qosMgnt 1.3.6.1.4.1.52.4.13.3
                     qosModeControl 1.3.6.1.4.1.52.4.13.3.1 integer read-write
The administrative status and control of the QoS mode for the QoS management. Enumeration: 'qosoff': 1, 'qosether': 4, 'qos8021p': 5, 'qossa': 2, 'qosda': 3.
                     qosMACTypeTable 1.3.6.1.4.1.52.4.13.3.2 no-access
Table of status information about each configured MAC Type Entry for the QoS Management.
                         qosMACTypeEntry 1.3.6.1.4.1.52.4.13.3.2.1 no-access
An entry in the table, containing information about configuration MAC Type Entry for the QoS Management.
                             qosMACTypeIndex 1.3.6.1.4.1.52.4.13.3.2.1.1 integer32 no-access
Qos MAC Type index.
                             qosMACTypeAddress 1.3.6.1.4.1.52.4.13.3.2.1.2 macaddress read-write
This values indicates the MAC address of that specified index in the entry.
                             qosMACTypePriority 1.3.6.1.4.1.52.4.13.3.2.1.3 integer32 read-write
This values indicates the level of priority of that specified MAC Address in entry.
                             qosMACTypeOpeStatus 1.3.6.1.4.1.52.4.13.3.2.1.4 integer read-only
This object indicates the status of this entry. other(0) - this entry is currently in use but the conditions under which it will remain so differ from the following values. valid(1) - this value to indicate this entry is currently in used. invalid(2) - write this value to the corresponding entry, the whole entry will be removed. Since the order of entry shall be re-order while it has been deleted. To re-freshed the whole table is recommended for new index. create(3) - write this value to indicate that the new MAC address will be added after next writing MAC address to that new entry. The adding action will be taken on the index that grater than 1. Enumeration: 'create': 3, 'other': 0, 'valid': 1, 'invalid': 2.
                     qosEtherTypeTable 1.3.6.1.4.1.52.4.13.3.3 no-access
Table of status information about each configured Ether Type Entry for QoS Management.
                         qosEtherTypeEntry 1.3.6.1.4.1.52.4.13.3.3.1 no-access
An entry in the table, containing information about configuration Ether Type for QoS Management.
                             qosEtherTypeIndex 1.3.6.1.4.1.52.4.13.3.3.1.1 integer32 no-access
Qos Ether Type index in the table.
                             qosEtherTypeHexValue 1.3.6.1.4.1.52.4.13.3.3.1.2 octet string read-write
The Hex Value to indicate the type of Ether of that specified index in the entry.
                             qosEtherTypePriority 1.3.6.1.4.1.52.4.13.3.3.1.3 integer32 read-write
This values indicates the level of priority of that specified MAC Address in entry.
                             qosEtherTypeOpeStatus 1.3.6.1.4.1.52.4.13.3.3.1.4 integer read-only
This object indicates the status of this entry. other(0) - this entry is currently in use but the conditions under which it will remain so differ from the following values. valid(1) - this value to indicate this entry is currently in used. invalid(2) - write this value to the corresponding entry, the whole entry will be removed. Since the order of entry shall be re-order while it has been deleted. To re-freshed the whole table is recommended for new index. create(3) - write this value to indicate that the new Ether Value will be added after next writing Ether Type Value to that new entry. The adding action will be taken on the index that grater than 1. Enumeration: 'create': 3, 'other': 0, 'valid': 1, 'invalid': 2.
                     qosQueueingMode 1.3.6.1.4.1.52.4.13.3.4 integer read-write
The administrative control of the QoS Queuing mode for the QoS management. Enumeration: 'weighted-fair': 1, 'strict-priority': 2.
                     qosSVPStatus 1.3.6.1.4.1.52.4.13.3.5 integer read-write
The administrative enable/disable state for SVP. Enumeration: 'disabled': 2, 'enabled': 1.
                 linkQualityMgnt 1.3.6.1.4.1.52.4.13.4
                     linkQualityTable 1.3.6.1.4.1.52.4.13.4.1 no-access
Table of status information about the radio Interface Link Quality Entry.
                         linkQualityEntry 1.3.6.1.4.1.52.4.13.4.1.1 no-access
An entry in the table, containing information about configuration of the radio Interface Link Quality.
                             linkQualityRadioIndex 1.3.6.1.4.1.52.4.13.4.1.1.1 integer32 no-access
This is the value to define the index of the radio interface.
                             linkQualityStaIndex 1.3.6.1.4.1.52.4.13.4.1.1.2 integer32 no-access
This is value to define the index of link station.
                             linkQualityStaMacAddress 1.3.6.1.4.1.52.4.13.4.1.1.3 macaddress read-only
This values indicates the MAC address of the link station.
                             linkQualityStaRssi 1.3.6.1.4.1.52.4.13.4.1.1.4 integer32 read-only
This values indicates the percentage RSSI of the link station.
                 apSnmpMgnt 1.3.6.1.4.1.52.4.13.5
                     trapControl 1.3.6.1.4.1.52.4.13.5.1 integer read-write
The administrative enable/disable state for SNMP Trap Control in a System. Enumeration: 'disabled': 2, 'enabled': 1.
                     trapConfiguration 1.3.6.1.4.1.52.4.13.5.2
                         trapSysSystemUp 1.3.6.1.4.1.52.4.13.5.2.1 integer read-write
The administrative enable/disable state for SNMP sysSystemUp trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapSysSystemDown 1.3.6.1.4.1.52.4.13.5.2.2 integer read-write
The administrative enable/disable state for SNMP sysSystemDown trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapSysRadiusServerChanged 1.3.6.1.4.1.52.4.13.5.2.3 integer read-write
The administrative enable/disable state for SNMP sysRadiusServerChanged trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapDot11StationAssociation 1.3.6.1.4.1.52.4.13.5.2.4 integer read-write
The administrative enable/disable state for SNMP dot11StationAssociation trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapDot11StationReAssociation 1.3.6.1.4.1.52.4.13.5.2.5 integer read-write
The administrative enable/disable state for SNMP dot11StationReAssociation trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapDot11StationAuthentication 1.3.6.1.4.1.52.4.13.5.2.6 integer read-write
The administrative enable/disable state for SNMP dot11StationAuthentication trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapDot11StationRequestFail 1.3.6.1.4.1.52.4.13.5.2.7 integer read-write
The administrative enable/disable state for SNMP dot11StationRequestFail trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapLocalMacAddrAuthFail 1.3.6.1.4.1.52.4.13.5.2.9 integer read-write
The administrative enable/disable state for SNMP localMacAddrAuthFail trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapLocalMacAddrAuthSuccess 1.3.6.1.4.1.52.4.13.5.2.10 integer read-write
The administrative enable/disable state for SNMP localMacAddrAuthSuccess trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapDot1xAuthNotInitiated 1.3.6.1.4.1.52.4.13.5.2.11 integer read-write
The administrative enable/disable state for SNMP dot1xAuthNotInitiated trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapDot1xAuthSuccess 1.3.6.1.4.1.52.4.13.5.2.12 integer read-write
The administrative enable/disable state for SNMP dot1xAuthSuccess trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapDot1xAuthFail 1.3.6.1.4.1.52.4.13.5.2.13 integer read-write
The administrative enable/disable state for SNMP dot1xAuthFail trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapDot1xMacAddrAuthSuccess 1.3.6.1.4.1.52.4.13.5.2.14 integer read-write
The administrative enable/disable state for SNMP dot1xMacAddrAuthSuccess trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapDot1xMacAddrAuthFail 1.3.6.1.4.1.52.4.13.5.2.15 integer read-write
The administrative enable/disable state for SNMP dot1xMacAddrAuthFail trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapPppLogonFail 1.3.6.1.4.1.52.4.13.5.2.16 integer read-write
The administrative enable/disable state for SNMP pppLogonFail trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapIappStationRoamedFrom 1.3.6.1.4.1.52.4.13.5.2.17 integer read-write
The administrative enable/disable state for SNMP iappStationRoamedFrom trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapIappStationRoamedTo 1.3.6.1.4.1.52.4.13.5.2.18 integer read-write
The administrative enable/disable state for SNMP iappStationRoamedFrom trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapIappContextDataSent 1.3.6.1.4.1.52.4.13.5.2.19 integer read-write
The administrative enable/disable state for SNMP iappContextDataSent trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapSntpServerFail 1.3.6.1.4.1.52.4.13.5.2.20 integer read-write
The administrative enable/disable state for SNMP sntpServerFail trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapDot11InterfaceAFail 1.3.6.1.4.1.52.4.13.5.2.21 integer read-write
The administrative enable/disable state for SNMP dot11InterfaceAFail trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapDot11InterfaceGFail 1.3.6.1.4.1.52.4.13.5.2.22 integer read-write
The administrative enable/disable state for SNMP dot11InterfaceGFail trap. Enumeration: 'disabled': 2, 'enabled': 1.
                         trapDot11WirelessSTPDetection 1.3.6.1.4.1.52.4.13.5.2.23 integer read-write
The administrative enable/disable state for SNMP dot11WirelessSTPDetection trap. Enumeration: 'disabled': 2, 'enabled': 1.
                     apSnmpTrapDestinationTable 1.3.6.1.4.1.52.4.13.5.3 no-access
Table of descriptive and status information about configuration of each trap receiving server.
                         apSnmpTrapDestinationEntry 1.3.6.1.4.1.52.4.13.5.3.1 no-access
An entry in the table, containing information about configuration of one trap receiving server.
                             apSnmpTrapDestinationIndex 1.3.6.1.4.1.52.4.13.5.3.1.1 integer no-access
Index of the Trap Destination Table.
                             apSnmpTrapDestinationCommunity 1.3.6.1.4.1.52.4.13.5.3.1.2 displaystring read-write
The SNMP Trap Community
                             apSnmpTrapDestinationIP 1.3.6.1.4.1.52.4.13.5.3.1.3 ipaddress read-write
The IP address of the trap receiving server.
                             apSnmpTrapDestinationState 1.3.6.1.4.1.52.4.13.5.3.1.4 integer read-write
This value indicates whether the trap receiving server is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                     apSnmpCommunityReadOnly 1.3.6.1.4.1.52.4.13.5.4 displaystring read-write
The SNMP Read Only Community. The value if read, will only show ******.
                     apSnmpCommunityReadWrite 1.3.6.1.4.1.52.4.13.5.5 displaystring read-write
The SNMP Read Write Community. The value if read, will only show *****.
                     apSnmpVersionFilter 1.3.6.1.4.1.52.4.13.5.6 integer read-write
To set the version-filter of SNMP. Enumeration: 'enableSNMPv1SNMPv2c': 1, 'disableSNMPv1SNMPv2c': 2.
                 sysEntity 1.3.6.1.4.1.52.4.13.6
                     swHardwareVer 1.3.6.1.4.1.52.4.13.6.1 displaystring read-only
Hardware version of the main board.
                     swBootRomVer 1.3.6.1.4.1.52.4.13.6.2 displaystring read-only
Boot ROM code version of the main board.
                     swOpCodeVer 1.3.6.1.4.1.52.4.13.6.3 displaystring read-only
Operation code version of the main board.
                     swSerialNumber 1.3.6.1.4.1.52.4.13.6.4 displaystring read-only
Serial Number of the Access Point.
                     swProductName 1.3.6.1.4.1.52.4.13.6.5 displaystring read-only
The Product Name of the Access Point.
                     swCountrySetting 1.3.6.1.4.1.52.4.13.6.6 displaystring read-only
The current CountryCode Setting of the Access Point.
                 apSecurityMgnt 1.3.6.1.4.1.52.4.13.7
                     apRadioSecurityTable 1.3.6.1.4.1.52.4.13.7.1 no-access
Table of descriptive and status information about configuration of each radio in terms of security settings.
                         apRadioSecurityEntry 1.3.6.1.4.1.52.4.13.7.1.1 no-access
An entry in the table, containing information about configuration of one radio of the AP.
                             apRadioSecurityIndex 1.3.6.1.4.1.52.4.13.7.1.1.1 integer32 no-access
Radio Index for security settings.
                             apRadioSecurityWEPAuthType 1.3.6.1.4.1.52.4.13.7.1.1.2 integer read-write
This value indicates the type of WEP authentication in use for this radio interface. opensystem(0) Set authentication open sharedkey(1) Set authentication shared wpa(2) Set WPA Mode wpapsk(3) Set WPA-PSK Mode wpa-wpa2-mixed(4) Set WPA-WPA2-Mixed Mode wpawpa2pskmixed(5) Set WPA-WPA2 PSK Mixed Mode wpa2(6) Set WPA2 Mode wpa2psk(7) Set WPA2-PSK Mode Enumeration: 'sharedkey': 1, 'wpawpa2pskmixed': 5, 'opensystem': 0, 'wpapsk': 3, 'wpa2': 6, 'wpa2psk': 7, 'wpawpa2mixed': 4, 'wpa': 2.
                             apRadioSecuritySharedKeyLen 1.3.6.1.4.1.52.4.13.7.1.1.3 integer read-only
This value indicates the shared key length for this radio interface. Enumeration: 'sixtyFour': 1, 'none': 0, 'oneHundredTwentyEight': 2, 'oneHundredFiftyTwo': 3.
                             apRadioSecurityWPAMode 1.3.6.1.4.1.52.4.13.7.1.1.4 integer read-write
This value indicates the state of WPA for this radio interface. Enumeration: 'notSupported': 2, 'supported': 0, 'required': 1.
                             apRadioSecurityWPAKeyType 1.3.6.1.4.1.52.4.13.7.1.1.5 integer read-write
This value indicates the type of WPA Key Management in use for this radio interface. Enumeration: 'presharedkey': 1, 'dot1x': 0.
                             apRadioSecurityWPACipher 1.3.6.1.4.1.52.4.13.7.1.1.6 integer read-write
This value indicates the type of WPA Cipher in use for this radio interface. Enumeration: 'tkip': 1, 'aes': 2, 'wep': 0.
                             apRadioSecurityWPAPSKType 1.3.6.1.4.1.52.4.13.7.1.1.7 integer read-write
This value indicates the type of WPA Pre Shared Key in use for this radio interface. Enumeration: 'alphanumeric': 1, 'hex': 0.
                             apRadioSecurityWPAPSK 1.3.6.1.4.1.52.4.13.7.1.1.8 displaystring read-write
This value indicates WPA Pre Shared Key in use for this radio interface.
                             apRadioSecurityWEPKeyType 1.3.6.1.4.1.52.4.13.7.1.1.9 integer read-write
This value indicates the type of WEP Key in use for this radio interface. Enumeration: 'alphanumeric': 1, 'hexadecimal': 0.
                             apRadioSecurityWEPEnabled 1.3.6.1.4.1.52.4.13.7.1.1.10 truthvalue read-write
This value indicates whether WEP is enabled.
                             apRadioSecurityWPACipherSuite 1.3.6.1.4.1.52.4.13.7.1.1.11 integer read-write
This value indicates the type of WPA Cipher Suite in use for this radio interface. Enumeration: 'tkip': 1, 'wep': 2, 'aesccmp': 0.
                             apRadioApSecurityWPAPreAuthentication 1.3.6.1.4.1.52.4.13.7.1.1.12 integer read-write
Whether Pre-Authentication is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                             apRadioApSecurityWPAPmksaLifetime 1.3.6.1.4.1.52.4.13.7.1.1.13 integer read-write
The number (in minutes) for Pmksa-Lifetime.
                     apSecuritySsh 1.3.6.1.4.1.52.4.13.7.2
                         apSecuritySshServerEnabled 1.3.6.1.4.1.52.4.13.7.2.1 truthvalue read-write
This value indicates whether SSH server is enabled.
                         apSecuritySshServerPort 1.3.6.1.4.1.52.4.13.7.2.2 integer32 read-write
This value indicates SSH server's port number.
                         apSecuritySshTelnetServerEnabled 1.3.6.1.4.1.52.4.13.7.2.3 truthvalue read-write
This value indicates whether telnet server is enabled.
                 apRadioInterfaceMgnt 1.3.6.1.4.1.52.4.13.8
                     enterpriseApRadioTable 1.3.6.1.4.1.52.4.13.8.2 no-access
Table of descriptive and status information about configuration of each radio.
                         enterpriseApRadioEntry 1.3.6.1.4.1.52.4.13.8.2.1 no-access
An entry in the table, containing information about configuration of one radio of the AP.
                             enterpriseApRadioIndex 1.3.6.1.4.1.52.4.13.8.2.1.1 integer32 no-access
Radio Index for configuration.
                             enterpriseApRadioAutoChannel 1.3.6.1.4.1.52.4.13.8.2.1.2 integer read-write
This value indicates whether auto channel selection is enabled or not for this radio interface Enumeration: 'disabled': 2, 'enabled': 1.
                             enterpriseApRadioTransmitPower 1.3.6.1.4.1.52.4.13.8.2.1.3 integer read-write
This value indicates the transmit power for this radio interface. Enumeration: 'min': 5, 'quarter': 3, 'full': 1, 'eighth': 4, 'half': 2.
                             enterpriseApRadioTurboMode 1.3.6.1.4.1.52.4.13.8.2.1.4 integer read-write
This value indicates whether turbo mode is enabled for this radio interface. Enumeration: 'disabled': 2, 'enabled': 1, 'invalid': 3.
                             enterpriseApRadioDataRate 1.3.6.1.4.1.52.4.13.8.2.1.5 integer read-write
This value indicates the data rate for this radio interface. Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54. Radio interface G operates all listed data rates. The auto setting will attempt to set the best data rate for the interface Enumeration: 'sixMbps': 6, 'elevenMbps': 11, 'oneMbps': 1, 'auto': 255, 'fiveAndHalfMbps': 5, 'twoMbps': 2, 'fiftyFourMbps': 54, 'twelveMbps': 12, 'nineMbps': 9, 'eighteenMbps': 18, 'thirtySixMbps': 36, 'fourtyEightMbps': 48, 'twentyFourMbps': 24.
                             enterpriseApRadioGMode 1.3.6.1.4.1.52.4.13.8.2.1.6 integer read-write
This value indicates the radio mode for the 802.11g radio. This setting is only valid for the 802.11g interface. Enumeration: 'gOnly': 2, 'bg': 3, 'bOnly': 1, 'invalid': 4.
                             enterpriseApRadioAntennaMode 1.3.6.1.4.1.52.4.13.8.2.1.7 integer read-write
This value indicates the antenna mode in use for the G-radio. The values are interpreted as follows: both(1) means use both built-in antennas, left(2) means use left side. right(3) means use right side. invalid(4) means not support. This setting is only valid for the 802.11g interface. Enumeration: 'both': 1, 'right': 3, 'invalid': 4, 'left': 2.
                             rogueApState 1.3.6.1.4.1.52.4.13.8.2.1.8 integer read-write
This value is used to enable/disable Rogue Ap Detection for this radio interface. Enumeration: 'disabled': 2, 'enabled': 1.
                             rogueApInterval 1.3.6.1.4.1.52.4.13.8.2.1.9 integer read-write
How often to scan for Rogue Aps. The interval in minutes, with default of 720(minutes).
                             rogueApDuration 1.3.6.1.4.1.52.4.13.8.2.1.10 integer read-write
How long to scan each channel (in milliseconds). A longer duration will yield more complete results. A shorter duration will allow clients a better chance of remaining connected. Default value is 350(milliseconds).
                             rogueApScanNow 1.3.6.1.4.1.52.4.13.8.2.1.11 integer read-write
When writing the value to enable, the AP will trigger the Rouge AP scan function. The value will always return disable(2). Enumeration: 'disabled': 2, 'enabled': 1.
                             enterpriseApRadioAntennaModeControl 1.3.6.1.4.1.52.4.13.8.2.1.12 integer read-only
This value indicates which antenna is in use for the radio Interface. The values are interpreted as follows: fixed(1) specify to use built-in antennas, external(2) specify to use one external antenna. Enumeration: 'fixed': 1, 'external': 2.
                             enterpriseApRadioFixedAntennaType 1.3.6.1.4.1.52.4.13.8.2.1.13 integer read-write
This value indicates which antenna type is in use as the fixed antenna is selected. Enumeration: 'right': 3, 'diversity': 1, 'left': 2.
                             enterpriseApRadioAntennaID 1.3.6.1.4.1.52.4.13.8.2.1.14 integer read-write
This value indicates which antenna ID will be in use for the radio Interface.
                             enterpriseApRadioMulticastDataRate 1.3.6.1.4.1.52.4.13.8.2.1.15 integer read-write
This value indicates the data rate for mc/bc packets from this radio interface. sixMbps(6), nineMbps(9), twelveMbps(12), eighteenMbps(18), twentyFourMbps(24), thirtySixMbps(36), fortyEightMbps(48), and fiftyFourMbps(54) are for 11a and g-only mode. The default for b-only and b+g mode is oneMbps(1), twoMbps(2), fiveAndHalfMbps(5) and elevenMbps(11). Enumeration: 'sixMbps': 6, 'elevenMbps': 11, 'oneMbps': 1, 'fiveAndHalfMbps': 5, 'twoMbps': 2, 'fortyEightMbps': 48, 'fiftyFourMbps': 54, 'twelveMbps': 12, 'nineMbps': 9, 'eighteenMbps': 18, 'thirtySixMbps': 36, 'twentyFourMbps': 24.
                             enterpriseApRadioAutoDataRate 1.3.6.1.4.1.52.4.13.8.2.1.16 integer read-write
This value indicates whether automated data rate is enabled or not for this radio interface Enumeration: 'disabled': 2, 'enabled': 1.
                             enterpriseApRadioPreamble 1.3.6.1.4.1.52.4.13.8.2.1.17 integer read-write
This value indicates the preamble length of 11g. The values are interpreted as follows: long(1) sets the preamble length to long. short(2) sets the preamble length to short. invalid(3) means not support. This setting is only valid for the 802.11g interface. Enumeration: 'short': 2, 'invalid': 3, 'long': 1.
                             enterpriseApRadioSWRetryMode 1.3.6.1.4.1.52.4.13.8.2.1.18 integer read-write
This value indicates whether SW retty mode is enabled or not for this radio interface Enumeration: 'disabled': 2, 'enabled': 1.
                     enterpriseApVapRadioTable 1.3.6.1.4.1.52.4.13.8.3 no-access
Table of descriptive and status information about configuration of each Vap radio.
                         enterpriseApVapRadioEntry 1.3.6.1.4.1.52.4.13.8.3.1 no-access
An entry in the table, containing information about configuration of one Vap radio of the AP.
                             enterpriseApVapRadioIndex 1.3.6.1.4.1.52.4.13.8.3.1.1 integer32 no-access
Radio Index for configuration.
                             enterpriseApVapRadioState 1.3.6.1.4.1.52.4.13.8.3.1.2 integer read-write
This value indicates the state of the radio interface. Enumeration: 'disabled': 2, 'enabled': 1.
                             enterpriseApVapRadioSecureAccess 1.3.6.1.4.1.52.4.13.8.3.1.3 integer read-write
This value indicates whether secure access is enabled for this radio interface. Enumeration: 'disabled': 2, 'enabled': 1.
                             enterpriseApVapRadioMaxAssoc 1.3.6.1.4.1.52.4.13.8.3.1.4 integer read-write
This value indicates the max number of clients allowed on this radio interface.
                             enterpriseApVapRadioTransmitKey 1.3.6.1.4.1.52.4.13.8.3.1.5 integer read-write
This value indicates default transmit key in use for this radio interface.
                             enterpriseApVapRadioDescription 1.3.6.1.4.1.52.4.13.8.3.1.6 displaystring read-write
This value indicates the description for this radio interface.
                             enterpriseApVapRadioDefefaultPriority 1.3.6.1.4.1.52.4.13.8.3.1.7 integer32 read-write
This values indicates the level of default priority of that specified VAP in entry.
                     enterpriseApRadioWdsTable 1.3.6.1.4.1.52.4.13.8.4 no-access
Table of configuration information for Wds for each Radio interface.
                         enterpriseApRadioWdsEntry 1.3.6.1.4.1.52.4.13.8.4.1 no-access
An entry in the table, containing information about configuration of peer Bridging for one radio of the AP. The table is indexed by radio Index (corresponding to enterpriseApRadioTable). The table does not contain the radio index as a member of the table.
                             wdsApRole 1.3.6.1.4.1.52.4.13.8.4.1.1 integer read-write
This value indicates the role of the Ap for this radio, roleAp(1): AP operation. roleBridgeMaster(2): Root-Bridge mode. roleBridge(3): Bridge Mode. Enumeration: 'roleBridgeMaster': 2, 'roleAp': 1, 'roleBridge': 3.
                             wdsApAckTimeout 1.3.6.1.4.1.52.4.13.8.4.1.2 integer read-write
This value indicates the WDS Ack timeout for this radio in us, and the following values can be set to the system: 0 Set wireless Ack Timeout as system default 20 0 to 1 miles: Ack timeout is 20 us 40 1 to 3 miles: Ack timeout is 40 us 75 3 to 6 miles: Ack timeout is 75 us 115 6 to 10 miles: Ack timeout is 115 us
                     enterpriseApRadioWdsPeerTable 1.3.6.1.4.1.52.4.13.8.5 no-access
Table of configuration information for Wds Peers for each Radio interface.
                         enterpriseApRadioWdsPeerEntry 1.3.6.1.4.1.52.4.13.8.5.1 no-access
An entry in the table, containing information about configuration of peer Bridging for one radio of the AP. The table is indexed by radio Index (corresponding to enterpriseApRadioTable) and the peer index (Up to 8). The table does not contain the radio index as a member of the table.
                             wdsPeerIndex 1.3.6.1.4.1.52.4.13.8.5.1.1 integer32 no-access
Peer Index for the radio interface.
                             wdsPeerBssid 1.3.6.1.4.1.52.4.13.8.5.1.2 displaystring read-write
The BSSID for this peer.
                             wdsPeerRSSI 1.3.6.1.4.1.52.4.13.8.5.1.3 integer32 read-only
This value indicates the RSSI value of the WDS peer link.
                     enterpriseApRadioWEPKeysTable 1.3.6.1.4.1.52.4.13.8.6 no-access
Conceptual table for WEP default keys.
                         enterpriseApRadioWEPKeysEntry 1.3.6.1.4.1.52.4.13.8.6.1 no-access
An Entry (conceptual row) in the WEP Default Keys Table. A collection of objects containing information used to determine if a WEPkey as been defined and if so, the value of the WEPkey.
                             enterpriseApRadioWEPKeysIndex 1.3.6.1.4.1.52.4.13.8.6.1.1 integer no-access
WEP Key Index for the radio interface.
                             enterpriseApRadioWEPKeyType 1.3.6.1.4.1.52.4.13.8.6.1.2 integer read-only
status of the WEP Key type Enumeration: 'hexadecimalKey': 1, 'otherKey': 3, 'alphanumericKey': 2.
                             enterpriseApRadioWEPKeyLength 1.3.6.1.4.1.52.4.13.8.6.1.3 integer read-only
status of the WEP Key Length. Enumeration: 'keyLengthOther': 4, 'keyLength128Bit': 2, 'keyLength64Bit': 1, 'keyLength152Bit': 3.
                     enterpriseApRadioAvAntennaListTable 1.3.6.1.4.1.52.4.13.8.7 no-access
Conceptual table for Available Antenna List used in the Radio.
                         enterpriseApRadioAvAntennaListEntry 1.3.6.1.4.1.52.4.13.8.7.1 no-access
An Entry (conceptual row) in the Antenna List Table. A collection of objects containing information used to show if an Antenna as been defined and if so, the value of the antenna Id.
                             enterpriseApRadioAvAntennaIndex 1.3.6.1.4.1.52.4.13.8.7.1.1 integer no-access
Available Antenna List Index for the radio interface.
                             enterpriseApRadioAvAntennaId 1.3.6.1.4.1.52.4.13.8.7.1.2 integer read-only
Available antenna Id in the entry.
                             enterpriseApRadioAvAntennaDesc 1.3.6.1.4.1.52.4.13.8.7.1.3 displaystring read-only
The description of the antenna ID.
                     enterpriseApRadioAvChannelListTable 1.3.6.1.4.1.52.4.13.8.8 no-access
Conceptual table for Available Channel List used in the Radio.
                         enterpriseApRadioAvChannelListEntry 1.3.6.1.4.1.52.4.13.8.8.1 no-access
An Entry (conceptual row) in the Channel List Table. A collection of objects containing information used to show if a Channel No. as been defined and if so, the value of the Channel No.
                             enterpriseApRadioAvChannelIndex 1.3.6.1.4.1.52.4.13.8.8.1.1 integer no-access
Channel List Index for the radio interface.
                             enterpriseApRadioAvChannelNo 1.3.6.1.4.1.52.4.13.8.8.1.2 integer read-only
Available channel number in the entry
                 apEtherInterfaceMgnt 1.3.6.1.4.1.52.4.13.9
                     apEtherNetConfig 1.3.6.1.4.1.52.4.13.9.1
                         netConfigIPAddress 1.3.6.1.4.1.52.4.13.9.1.1 ipaddress read-write
The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
                         netConfigSubnetMask 1.3.6.1.4.1.52.4.13.9.1.2 ipaddress read-write
The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use DHCP to try to figure out what these values should be. If DHCP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
                         netConfigDefaultGateway 1.3.6.1.4.1.52.4.13.9.1.3 ipaddress read-write
The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0.
                         netConfigHttpState 1.3.6.1.4.1.52.4.13.9.1.4 integer read-write
Whether HTTP is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                         netConfigHttpPort 1.3.6.1.4.1.52.4.13.9.1.5 integer read-write
The port number for HTTP.
                         netConfigHttpsState 1.3.6.1.4.1.52.4.13.9.1.6 integer read-write
Whether Secure HTTP is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                         netConfigHttpsPort 1.3.6.1.4.1.52.4.13.9.1.7 integer read-write
The port number for Secure HTTP.
                         netConfigDHCPState 1.3.6.1.4.1.52.4.13.9.1.8 integer read-write
Whether DHCP is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                 apFilterControlMgnt 1.3.6.1.4.1.52.4.13.10
                       apFilterControlBridge 1.3.6.1.4.1.52.4.13.10.1 integer read-write
This value indicates the local bridge filter setting. Enumeration: 'disabled': 2, 'enabled': 1.
                       enterpriseApFilterControlAPManage 1.3.6.1.4.1.52.4.13.10.2 integer read-write
This value indicates the AP management filter setting. Enumeration: 'disabled': 2, 'enabled': 1.
                       enterpriseApFilterControlEthernet 1.3.6.1.4.1.52.4.13.10.3 integer read-write
This value indicates the ethernet filter setting. Enumeration: 'disabled': 2, 'enabled': 1.
                       enterpriseApFilterProtocolTable 1.3.6.1.4.1.52.4.13.10.4 no-access
Table of descriptive and status information about configuration of the filter protocol table.
                           enterpriseApFilterProtocolEntry 1.3.6.1.4.1.52.4.13.10.4.1 no-access
An entry in the filter protocol table, containing information about configuration of one filter table entry.
                               enterpriseApFilterProtocolIndex 1.3.6.1.4.1.52.4.13.10.4.1.1 integer32 no-access
Index of the Protocol Filters.
                               enterpriseApFilterProtocolName 1.3.6.1.4.1.52.4.13.10.4.1.2 displaystring read-only
This value indicates the name of the protocol filter. One of the following: Aironet_DDP, Appletalk_ARP, ARP, Banyan, Berkeley_Trailer_Negotiation, CDP, DEC_LAT, DEC_MOP, DEC_MOP_Dump_Load, DEC_XNS, EAPOL, Enet_Config_Test, Ethertalk, IP, LAN_Test, NetBEUI, Novell_IPX(new), Novell_IPX(old), RARP, Telxon_TXP, X.25_Level3
                               enterpriseApFilterProtocolISODesignator 1.3.6.1.4.1.52.4.13.10.4.1.3 displaystring read-only
This value indicates the name of the protocol filter.
                               enterpriseApFilterProtocolState 1.3.6.1.4.1.52.4.13.10.4.1.4 integer read-write
This value indicates whether the protocol filter is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                       apvGlobalIBSSRelayMode 1.3.6.1.4.1.52.4.13.10.5 integer read-write
This value indicates the setting of the global IBSS Relay mode among the VAPs. In Per-VAP Mode enable, the traffic between the VAPs should be blocked. In Al-VAP Mode enable, the traffic between should not be blocked. Enumeration: 'allVapModeEnable': 2, 'perVapModeEnable': 1.
                       apvFilterControlTable 1.3.6.1.4.1.52.4.13.10.6 no-access
Table of the control and status information about configuration of the filter Control for each Vap.
                           apvFilterControlEntry 1.3.6.1.4.1.52.4.13.10.6.1 no-access
An entry in the table, containing information about configuration of the filter for each Vap of the AP.
                               apvFilterControlIndex 1.3.6.1.4.1.52.4.13.10.6.1.1 integer32 no-access
Index of the configuration.
                               apvIBSSFilterControl 1.3.6.1.4.1.52.4.13.10.6.1.2 integer read-write
This value indicates the local bridge filter(IBSS Relay Filter) setting. Enumeration: 'disabled': 2, 'enabled': 1.
                               apvAPManageFilterControl 1.3.6.1.4.1.52.4.13.10.6.1.3 integer read-write
This value indicates the AP management filter setting. Enumeration: 'disabled': 2, 'enabled': 1.
                 apVLANMgnt 1.3.6.1.4.1.52.4.13.11
                       apVLANMgntNativeId 1.3.6.1.4.1.52.4.13.11.1 integer read-write
This value indicates the native VLAN Id.
                       apVLANMgntState 1.3.6.1.4.1.52.4.13.11.2 integer read-only
This value indicates whether VLANs are enabled or disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                       apVLANMgntStateNextBoot 1.3.6.1.4.1.52.4.13.11.3 integer read-write
This value indicates the VLANs state for the next reset. Enumeration: 'disabled': 2, 'enabled': 1.
                       apNativeVlanTable 1.3.6.1.4.1.52.4.13.11.6 no-access
Table used to manage the Vlans for each wireless interface.
                           apNativeVlanEntry 1.3.6.1.4.1.52.4.13.11.6.1 no-access
An entry in the table, containing information about VLAN configuration of one wireless interface.
                               apNativeVlanIfIndex 1.3.6.1.4.1.52.4.13.11.6.1.1 integer32 no-access
Interface Index of the wireless interface for which the VLAN is assigned to.
                               apNativeVlanSsidNumber 1.3.6.1.4.1.52.4.13.11.6.1.2 integer32 no-access
Associated Number for Service Set Id (SSID) of the wireless interface for which the VLAN is assigned to. Note: This is for future support of multiple SSIDs per radio interface.
                               apNativeVlanVlanId 1.3.6.1.4.1.52.4.13.11.6.1.3 integer32 read-write
This value indicates the native VLAN Id of the wireless interface associated with the if index and the SSID number(if it is not 0).
                               apNativeVlanState 1.3.6.1.4.1.52.4.13.11.6.1.4 integer read-write
This value indicates the Native VLANs state. Enumeration: 'disabled': 2, 'enabled': 1.
                       apVLANMgntEtherUntaggedVlanId 1.3.6.1.4.1.52.4.13.11.7 integer32 read-write
This value indicates the Untagged VlanID for Ether Interface.
                 apAuthenticationMgnt 1.3.6.1.4.1.52.4.13.12
                       apAuthenticationSetupEntry 1.3.6.1.4.1.52.4.13.12.1
                           ap8021xState 1.3.6.1.4.1.52.4.13.12.1.1 integer read-write
This attribute indicates that the Enterprise the state of the 802.1X authentication algorithm. Enumeration: 'disabled': 0, 'supported': 1, 'required': 2.
                           ap8021xBroadcastKeyRefreshRate 1.3.6.1.4.1.52.4.13.12.1.2 integer read-write
The number (in minutes) between changing the broadcast key for 802.1X and WPA clients
                           ap8021xSessionKeyRefreshRate 1.3.6.1.4.1.52.4.13.12.1.3 integer read-write
The number (in minutes) between changing session keys for 802.1X and WPA clients
                           ap8021xReauthenticationTimeout 1.3.6.1.4.1.52.4.13.12.1.4 integer read-write
The number (in minutes) between forcing 802.1X clients to reauthenticate
                           apAuthenticationMode 1.3.6.1.4.1.52.4.13.12.1.5 integer read-write
This value indicates the type of MAC authentication or RADIUS authentication in use, or not in use. Enumeration: 'disabled': 0, 'radius': 2, 'local': 1.
                       apAuthenticationServerTable 1.3.6.1.4.1.52.4.13.12.2 no-access
Table of descriptive and status information about configuration of each authentication server.
                           apAuthenticationServerEntry 1.3.6.1.4.1.52.4.13.12.2.1 no-access
An entry in the table, containing information about configuration of one authentication server of the AP.
                               apAuthenticationServerIndex 1.3.6.1.4.1.52.4.13.12.2.1.1 integer32 no-access
Index of the Authentication Server
                               apAuthenticationServer 1.3.6.1.4.1.52.4.13.12.2.1.2 displaystring read-write
This value indicates the IP address or host name of the authentication server.
                               apAuthenticationPort 1.3.6.1.4.1.52.4.13.12.2.1.3 integer read-write
This value indicates the UDP Port used by the authentication server.
                               apAuthenticationKey 1.3.6.1.4.1.52.4.13.12.2.1.4 displaystring read-write
This value indicates the shared key used by the authentication server.
                               apAuthenticationRetransmit 1.3.6.1.4.1.52.4.13.12.2.1.5 integer read-write
This value indicates the retransmit timer length used by the authentication server.
                               apAuthenticationTimeout 1.3.6.1.4.1.52.4.13.12.2.1.6 integer read-write
This value indicates the Timeout value(sec) used by the authentication server.
                               apAuthenticationAcctPort 1.3.6.1.4.1.52.4.13.12.2.1.7 integer read-write
UDP Accounting Port. The valid range is from 1024-65535. A value of 0 means accounting is disabled.
                               apAuthenticationAcctInterimUpdate 1.3.6.1.4.1.52.4.13.12.2.1.8 integer read-write
The interval between sending accounting updates.
                               apAuthenticationAcctState 1.3.6.1.4.1.52.4.13.12.2.1.9 integer read-write
This value indicates whether the Accounting Server is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                       apAuthenticationSupplicantTable 1.3.6.1.4.1.52.4.13.12.3 no-access
Table of descriptive and status information about configuration of supplicant
                           apAuthenticationSupplicantEntry 1.3.6.1.4.1.52.4.13.12.3.1 no-access
An entry in the table, containing information about configuration of one supplicant.
                               ap8021xSuppIndex 1.3.6.1.4.1.52.4.13.12.3.1.1 integer32 no-access
Index of the interface for which this supplicant is running. Currently only the ethernet interface.
                               ap8021xSuppState 1.3.6.1.4.1.52.4.13.12.3.1.2 integer read-write
This object is used to enable or disable the 802.1X supplicant. Enumeration: 'disabled': 0, 'enabled': 1.
                               ap8021xSuppUser 1.3.6.1.4.1.52.4.13.12.3.1.3 displaystring read-write
This value indicates the username for supplicant. If value is configured, will display ****. Else will display EMPTY.
                               ap8021xSuppPasswd 1.3.6.1.4.1.52.4.13.12.3.1.4 displaystring read-write
This value indicates the password for supplicant. If value is configured, will display ****. Else will display EMPTY.
                       apvAuthenticationSetupTable 1.3.6.1.4.1.52.4.13.12.4 no-access
Table of descriptive and status information about configuration of 8021x for each Vap.
                           apvAuthenticationSetupEntry 1.3.6.1.4.1.52.4.13.12.4.1 no-access
An entry in the table, containing information about configuration of 8021x for each Vap of the AP.
                               apv8021xIndex 1.3.6.1.4.1.52.4.13.12.4.1.1 integer32 no-access
Index for configuration.
                               apv8021xState 1.3.6.1.4.1.52.4.13.12.4.1.2 integer read-write
This attribute indicates that the Enterprise the state of the 802.1X authentication algorithm. Enumeration: 'disabled': 0, 'supported': 1, 'required': 2.
                               apv8021xBroadcastKeyRefreshRate 1.3.6.1.4.1.52.4.13.12.4.1.3 integer read-write
The number (in minutes) between changing the broadcast key for 802.1X and WPA clients
                               apv8021xSessionKeyRefreshRate 1.3.6.1.4.1.52.4.13.12.4.1.4 integer read-write
The number (in minutes) between changing history keys for 802.1X and WPA clients
                               apv8021xReauthenticationTimeout 1.3.6.1.4.1.52.4.13.12.4.1.5 integer read-write
The number (in minutes) between forcing 802.1X clients to reauthenticate
                               apvMACAuthenticationMode 1.3.6.1.4.1.52.4.13.12.4.1.6 integer read-write
This value indicates the mode of MAC authentication in use. Enumeration: 'disabled': 0, 'remote': 2, 'local': 1.
                               apvMACAuthenticationTimeout 1.3.6.1.4.1.52.4.13.12.4.1.7 integer read-write
The number (in minutes) between forcing RADIUS MAC to authenticate.
                               apvMACAuthenticationPasswd 1.3.6.1.4.1.52.4.13.12.4.1.8 displaystring read-write
This value indicates the password for MAC RADIUS Authentication. If value is configured, will display ****. Else will display EMPTY.
                 apWStationSessionMgnt 1.3.6.1.4.1.52.4.13.13
                       apWStationSessionTable 1.3.6.1.4.1.52.4.13.13.1 no-access
This table list all sessions (wireless stations) status
                           apWStationSessionEntry 1.3.6.1.4.1.52.4.13.13.1.1 no-access
An entry in the table, containing information about status and statistics of the wireless station.
                               apWStationSessionIfIndex 1.3.6.1.4.1.52.4.13.13.1.1.1 integer32 no-access
Interface index for the radio this session is associated with.
                               apWStationSessionStationAddres 1.3.6.1.4.1.52.4.13.13.1.1.2 macaddress no-access
The unique MAC Address of the station for this session.
                               apWStationSessionAuthenticated 1.3.6.1.4.1.52.4.13.13.1.1.3 truthvalue read-only
Whether the session is authenticated or not.
                               apWStationSessionAssociated 1.3.6.1.4.1.52.4.13.13.1.1.4 truthvalue read-only
Whether the session is associated or not. It is rare case that not associated stations show up in the table.
                               apWStationSessionIsForwarding 1.3.6.1.4.1.52.4.13.13.1.1.5 truthvalue read-only
Whether the AP is forwarding the client station traffic (higher level authentication)
                               apWStationSessionKeyType 1.3.6.1.4.1.52.4.13.13.1.1.6 integer read-only
The encryption key type used by the station. Note that wpa-wep is not supported Enumeration: 'none': 1, 'wpaTkip': 5, 'staticWep': 2, 'dynamicWep': 3, 'wpaWep': 4, 'wpaAes': 6.
                               apWStationSessionAssociationId 1.3.6.1.4.1.52.4.13.13.1.1.7 integer32 read-only
The internal association identify number
                               apWStationSessionLastAuthenticatedTime 1.3.6.1.4.1.52.4.13.13.1.1.8 timeticks read-only
This is the time in hundredths of a second last time the client is authenticated. Note that a session may be authenticated multiple times. The value is related to the system startup
                               apWStationSessionAssociatedTime 1.3.6.1.4.1.52.4.13.13.1.1.9 timeticks read-only
This is the time in hundredths of a second since the client associated. The value is related to the system startup
                               apWStationSessionLastAssociatedTime 1.3.6.1.4.1.52.4.13.13.1.1.10 timeticks read-only
This is the time in hundredths of a second when the client associated in last session. The value is related to the system startup
                               apWStationSessionLastDisassociatedTime 1.3.6.1.4.1.52.4.13.13.1.1.11 timeticks read-only
This is the time in hundredths of a second when the client disassociated in last session. The value is related to the system startup
                               apWStationSessionTxPacketCount 1.3.6.1.4.1.52.4.13.13.1.1.12 counter32 read-only
This is the number of packets transmitted from the client to the AP. It includes data, control and management packets.
                               apWStationSessionRxPacketCount 1.3.6.1.4.1.52.4.13.13.1.1.13 counter32 read-only
This is the number of unicast packets transmitted from the AP to the client. It includes data, control and management packets.
                               apWStationSessionTxByteCount 1.3.6.1.4.1.52.4.13.13.1.1.14 counter32 read-only
This is the number of bytes transmitted from the client to the AP. It includes the bytes of data, control and management packets.
                               apWStationSessionRxByteCount 1.3.6.1.4.1.52.4.13.13.1.1.15 counter32 read-only
This is the number of unicast bytes transmitted from the AP to the client. It includes the bytes of data, control and management packets.
                               apWStationSessionVlanID 1.3.6.1.4.1.52.4.13.13.1.1.16 integer read-only
The current VLAN Id used by the station.
                 apRogueApMgnt 1.3.6.1.4.1.52.4.13.14
                       rogueApDetectionTable 1.3.6.1.4.1.52.4.13.14.1 no-access
Table of each AP that has been detected.
                           rogueApDetectionEntry 1.3.6.1.4.1.52.4.13.14.1.1 no-access
An entry in the table, containing information about any AP detected.
                               rogueApIndex 1.3.6.1.4.1.52.4.13.14.1.1.1 integer no-access
Monotonically increasing index.
                               rogueApBssid 1.3.6.1.4.1.52.4.13.14.1.1.2 displaystring read-only
The AP BSSID
                               rogueApSsid 1.3.6.1.4.1.52.4.13.14.1.1.3 displaystring read-only
The AP SSID
                               rogueApPortNumber 1.3.6.1.4.1.52.4.13.14.1.1.4 integer32 read-only
Interface index for the radio.
                               rogueApChannelNumber 1.3.6.1.4.1.52.4.13.14.1.1.5 integer32 read-only
Channel where Ap detected.
                               rogueApRSSIValue 1.3.6.1.4.1.52.4.13.14.1.1.6 integer32 read-only
RSSI for AP detected.
                       apRougeApControl 1.3.6.1.4.1.52.4.13.14.2
                           rogueApRADIUSAuthenticate 1.3.6.1.4.1.52.4.13.14.2.1 integer read-write
Value is used to enable/disable RADIUS Authentication. Enumeration: 'disabled': 2, 'enabled': 1.
                           rogueApClear 1.3.6.1.4.1.52.4.13.14.2.2 integer read-write
This object is set to clear(1) to clear the Rogue AP detection table. When read, the value will have no meaning. Enumeration: 'clear': 1.
                 apAdminMgnt 1.3.6.1.4.1.52.4.13.15
                       apAdminUsername 1.3.6.1.4.1.52.4.13.15.1 displaystring read-write
This value indicates the username for management login.
                       appAdminPassword 1.3.6.1.4.1.52.4.13.15.2 displaystring read-write
This value indicates the password for management login.
                 apResetMgt 1.3.6.1.4.1.52.4.13.16
                       apRestartOpCodeFile 1.3.6.1.4.1.52.4.13.16.1 displaystring read-write
Name of op-code file for start-up.
                       apRestartControl 1.3.6.1.4.1.52.4.13.16.2 integer read-write
Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1). Enumeration: 'running': 1, 'coldBoot': 3, 'warmBoot': 2.
                 apSNTPMgnt 1.3.6.1.4.1.52.4.13.17
                       apSNTPState 1.3.6.1.4.1.52.4.13.17.1 integer read-write
This value indicates whether SNTP is enabled or not. At least one of the SNTP servers must have a valid IP address before SNTP can be enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                       apSNTPPrimaryServer 1.3.6.1.4.1.52.4.13.17.2 ipaddress read-write
This value indicates the IP address of the primary SNTP server.
                       apSNTPSecondaryServer 1.3.6.1.4.1.52.4.13.17.3 ipaddress read-write
This value indicates the IP address of the secondary SNTP server.
                       apSNTPTimezone 1.3.6.1.4.1.52.4.13.17.4 integer read-write
This value indicates which timezone to use. Enumeration: 'bucharest': 31, 'beijing': 44, 'casablanca': 21, 'canberra': 48, 'bogota': 10, 'greenwichMeanTimeDublin': 22, 'prague': 27, 'israel': 35, 'pacific': 4, 'alaska': 3, 'hobart': 50, 'amsterdam': 24, 'midAtlantic': 19, 'fiji': 52, 'mexicoCity': 8, 'mountain': 6, 'vogograd': 40, 'caracas': 14, 'harare': 33, 'paris': 28, 'midwayIsland': 1, 'athens': 30, 'brisbane': 47, 'buenos': 18, 'cairo': 32, 'indiana': 12, 'enewetakKwajalein': 0, 'guam': 49, 'santiago': 15, 'arizona': 5, 'eastern': 11, 'azores': 20, 'saskatchewan': 9, 'moscow': 37, 'bratislava': 26, 'bangkok': 43, 'baghdad': 36, 'atlantic': 13, 'tehran': 38, 'central': 7, 'helsinki': 34, 'brasilia': 17, 'greenwichMeanTimeLisbon': 23, 'tokyo': 46, 'abuDhabi': 39, 'hawaii': 2, 'sofija': 29, 'stockholm': 25, 'islamabad': 41, 'magadan': 51, 'almaty': 42, 'wellington': 53, 'newfoundland': 16, 'taipei': 45.
                       apSNTPDST 1.3.6.1.4.1.52.4.13.17.5 integer read-write
This value indicates whether Daylight Savings Time is enabled or not. Enumeration: 'disabled': 2, 'enabled': 1.
                       apSNTPDSTStartMonth 1.3.6.1.4.1.52.4.13.17.6 integer read-write
This value indicates the starting month for Daylight Savings Time.
                       apSNTPDSTStartDay 1.3.6.1.4.1.52.4.13.17.7 integer read-write
This value indicates the starting day for Daylight Savings Time.
                       apSNTPDSTEndMonth 1.3.6.1.4.1.52.4.13.17.8 integer read-write
This value indicates the ending month for Daylight Savings Time.
                       apSNTPDSTEndDay 1.3.6.1.4.1.52.4.13.17.9 integer read-write
This value indicates the ending day for Daylight Savings Time.
                 apDNSMgnt 1.3.6.1.4.1.52.4.13.18
                       apDNSPrimaryServer 1.3.6.1.4.1.52.4.13.18.1 ipaddress read-write
This value indicates the IP address of the primary DNS server.
                       apDNSSecondaryServer 1.3.6.1.4.1.52.4.13.18.2 ipaddress read-write
This value indicates the IP address of the secondary DNS server.
                 apIappMgnt 1.3.6.1.4.1.52.4.13.19
                       apIappEnabled 1.3.6.1.4.1.52.4.13.19.1 integer read-write
Whether IAPP is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                 apSyslogConfigMgnt 1.3.6.1.4.1.52.4.13.20
                       apLogConfigState 1.3.6.1.4.1.52.4.13.20.1 integer read-write
This value indicates whether syslog is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                       apSyslogConsoleState 1.3.6.1.4.1.52.4.13.20.2 integer read-write
This value indicates whether syslog console logging is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                       apSyslogLevel 1.3.6.1.4.1.52.4.13.20.3 integer read-write
This value indicates the syslog logging level. Enumeration: 'info': 6, 'notice': 5, 'emergency': 0, 'alert': 1, 'critical': 2, 'error': 3, 'debug': 7, 'warning': 4.
                       apSyslogServerTable 1.3.6.1.4.1.52.4.13.20.4 no-access
Table of descriptive and status information about configuration of each syslog server.
                           apSyslogServerEntry 1.3.6.1.4.1.52.4.13.20.4.1 no-access
An entry in the table, containing information about configuration of one syslog server of the AP.
                               apSyslogServerIndex 1.3.6.1.4.1.52.4.13.20.4.1.1 integer32 no-access
Index of the Syslog Server
                               apSyslogServerState 1.3.6.1.4.1.52.4.13.20.4.1.2 integer read-write
This value indicates whether the syslog server is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                               apSyslogServerIPAddress 1.3.6.1.4.1.52.4.13.20.4.1.3 displaystring read-write
This value indicates the IP address of the syslog server.
                               apSyslogServerPort 1.3.6.1.4.1.52.4.13.20.4.1.4 integer read-write
This value indicates the UDP Port used by the syslog server.
                 apEventLogMgnt 1.3.6.1.4.1.52.4.13.21
                       apEventLogTable 1.3.6.1.4.1.52.4.13.21.1 no-access
This table is a snapshot of the current event log.
                           apEventLogEntry 1.3.6.1.4.1.52.4.13.21.1.1 no-access
An entry in the table, containing one message from the event log.
                               apEventLogIndex 1.3.6.1.4.1.52.4.13.21.1.1.1 integer no-access
Index of the Event Log Message
                               apEventLogMessage 1.3.6.1.4.1.52.4.13.21.1.1.2 displaystring read-only
The Event Log Message
                       apEventLogClear 1.3.6.1.4.1.52.4.13.21.2 integer read-write
This object is set to 1 to clear the event log. When read, the value will have no meaning. Enumeration: 'clearLog': 1.
                 apWSLSupportMgnt 1.3.6.1.4.1.52.4.13.22
                       apWSLSupportControl 1.3.6.1.4.1.52.4.13.22.1 integer read-write
The administrative enable/disable state for the control of the WSL function. Enumeration: 'disabled': 2, 'enabled': 1.
                       apWSLSupportMasterAddress 1.3.6.1.4.1.52.4.13.22.2 displaystring read-write
This value indicates IP address of the main WSL.
                       apWSLSupportSecondaryAddress 1.3.6.1.4.1.52.4.13.22.3 displaystring read-write
This value indicates IP address of the peer WSL.
                       apWSLSupportPort 1.3.6.1.4.1.52.4.13.22.4 integer read-write
This value indicates the TCP Port used by the WSL server.
                       apWSLSupportHeartbeatInterval 1.3.6.1.4.1.52.4.13.22.5 integer read-write
This value indicates the WSL Heartbeat Interval.
                       apWSLSupportHeartbeatLastChange 1.3.6.1.4.1.52.4.13.22.6 displaystring read-only
The sysUpTime at which the Heartbeat was last modified. The format is defined as hh:mm:ss - dd:mm:yy
                       apWSLSupportOperationMode 1.3.6.1.4.1.52.4.13.22.7 integer read-write
This attribute indicates that the WSL Operation Mode in 0: AP in standalone mode, or 1: AP in ETS WSL managed mode (associated mode). Enumeration: 'associated': 1, 'standalone': 0.
                       apWSLSupportRxThreshold 1.3.6.1.4.1.52.4.13.22.8 integer read-write
This value indicates the WSL CCA rejection threshold in dBm scale.
                       apWSLSupportControlStatus 1.3.6.1.4.1.52.4.13.22.9 integer read-only
The operative enable/disable state for the control of the WSL function. Enumeration: 'disabled': 2, 'enabled': 1.
                       apWSLRFAreaPollControl 1.3.6.1.4.1.52.4.13.22.10 integer read-only
The administrative enable/disable state for the control of the WSL RF Area Poll function. Enumeration: 'disabled': 2, 'enabled': 1.
                       apWSLRFAreaPollControlStatus 1.3.6.1.4.1.52.4.13.22.11 integer read-only
The operative enable/disable state for the control of the WSL RF Area Poll function. Enumeration: 'disabled': 2, 'enabled': 1.
                 apWMMMgnt 1.3.6.1.4.1.52.4.13.23
                       apWMMControlTable 1.3.6.1.4.1.52.4.13.23.1 no-access
Table for WMM configuration per radio.
                           apWMMControlEntry 1.3.6.1.4.1.52.4.13.23.1.1 no-access
An Entry in the apWMMControlTable.
                               apWMMState 1.3.6.1.4.1.52.4.13.23.1.1.1 integer read-write
This value indicates the WMM state. Enumeration: 'disabled': 0, 'required': 1, 'supported': 2.
                       apWMMBssParamTable 1.3.6.1.4.1.52.4.13.23.2 no-access
Conceptual table for EDCA default parameter values at a non-AP QSTA. This table shall contain the four entries of the EDCA parameters corresponding to four possible ACs (access category): 1) AC_BE (best effort, ACI=0) 2) AC_BK (background, ACI=1) 3) AC_VI (video, ACI=2) 4) AC_VO (voice, ACI=3)
                           apWMMBssParamEntry 1.3.6.1.4.1.52.4.13.23.2.1 no-access
An Entry (conceptual row) in the apWMMBssParamTable. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
                               apWMMBssParamIndex 1.3.6.1.4.1.52.4.13.23.2.1.1 integer no-access
The index used to identify instances of the columnar objects in the apWMMBssParam Table. The value of this variable is 1) 1 AC_BE (best effort, ACI=0) 2) 2 AC_BK (background, ACI=1) 3) 3 AC_VI (video, ACI=2) 4) 4 AC_VO (voice, ACI=3)
                               apWMMBssParamCWmin 1.3.6.1.4.1.52.4.13.23.2.1.2 integer read-write
This attribute shall specify the value of the minimum size of the window in the exponent form that shall be used by a QSTA for a particular AC for generating a random number for the backoff.
                               apWMMBssParamCWmax 1.3.6.1.4.1.52.4.13.23.2.1.3 integer read-write
This attribute shall specify the value of the maximum size of the window in the exponent form that shall be used by a QSTA for a particular AC for generating a random number for the backoff.
                               apWMMBssParamAIFSN 1.3.6.1.4.1.52.4.13.23.2.1.4 integer read-write
This attribute shall specify the number of slots, after a SIFS duration, that the QSTA, for a particular AC, shall sense the medium idle either before transmitting or executing a backoff.
                               apWMMBssParamTXOPLimit 1.3.6.1.4.1.52.4.13.23.2.1.5 integer read-write
This attribute shall specify the maximum time of an TXOP in units of 32 microseconds for a given AC at a non-AP QSTA.
                               apWMMBssParamAdmissionControl 1.3.6.1.4.1.52.4.13.23.2.1.6 truthvalue read-write
This attribute, when TRUE, indicates that admission control is mandatory for the given AC. When False, this attribute indicates that the admission control is not mandatory for the given AC. The default value for this parameter shall be FALSE.
                       apWMMApParamTable 1.3.6.1.4.1.52.4.13.23.3 no-access
Conceptual table for EDCA default parameter values at the QAP. This table shall contain the four entries of the EDCA parameters corresponding to four possible ACs (access category): 1) AC_BE (best effort, ACI=0) 2) AC_BK (background, ACI=1) 3) AC_VI (video, ACI=2) 4) AC_VO (voice, ACI=3)
                           apWMMApParamEntry 1.3.6.1.4.1.52.4.13.23.3.1 no-access
An Entry (conceptual row) in the apWMMApParamTable. ifIndex - Each IEEE 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
                               apWMMApParamIndex 1.3.6.1.4.1.52.4.13.23.3.1.1 integer no-access
The index used to identify instances of the columnar objects in the apWMMApParam Table. The value of this variable is 1) 1 AC_BE (best effort, ACI=0) 2) 2 AC_BK (background, ACI=1) 3) 3 AC_VI (video, ACI=2) 4) 4 AC_VO (voice, ACI=3)
                               apWMMApParamCWmin 1.3.6.1.4.1.52.4.13.23.3.1.2 integer read-write
This attribute shall specify the value of the minimum size of the window in the exponent form that shall be used by a QAP for a particular AC for generating a random number for the backoff.
                               apWMMApParamCWmax 1.3.6.1.4.1.52.4.13.23.3.1.3 integer read-write
This attribute shall specify the value of the maximum size of the window in the exponent form that shall be used by a QAP for a particular AC for generating a random number for the backoff.
                               apWMMApParamAIFSN 1.3.6.1.4.1.52.4.13.23.3.1.4 integer read-write
This attribute shall specify the number of slots, after a SIFS duration, that the QAP, for a particular AC, shall sense the medium idle either before transmitting or executing a backoff.
                               apWMMApParamTXOPLimit 1.3.6.1.4.1.52.4.13.23.3.1.5 integer read-write
This attribute shall specify the maximum time of an TXOP in units of 32 microseconds for a given AC at a QAP.
                               apWMMApParamAdmissionControl 1.3.6.1.4.1.52.4.13.23.3.1.6 truthvalue read-write
This attribute, when TRUE, indicates that admission control is mandatory for the given AC. When False, this attribute indicates that the admission control is not mandatory for the given AC. The default value for this parameter shall be FALSE.
                 apNotificationTrapTree 1.3.6.1.4.1.52.4.13.100
                         apNotificationObjects 1.3.6.1.4.1.52.4.13.100.1
                             apNotificationDot11MacAddr 1.3.6.1.4.1.52.4.13.100.1.1 macaddress read-only
Mac Address of the affected interface, returned with traps only.
                             apNotificationDot11Station 1.3.6.1.4.1.52.4.13.100.1.2 macaddress read-only
This attribute holds the MAC address of the wireless station
                             apNotificationDot11RequestType 1.3.6.1.4.1.52.4.13.100.1.3 integer read-only
This attribute defines the request type sent by the station. Value = 1: Unknown request type Value = 2: Association Request Value = 3: Re-association Request Value = 4: Authentication Enumeration: 'unknown': 1, 'authentication': 4, 'reAssociation': 3, 'association': 2.
                             apNotificationDot11ReasonCode 1.3.6.1.4.1.52.4.13.100.1.4 integer read-only
This attribute defines the reason for the failure of an operation. Value = 1: Invalid mode/state Value = 2: Station not authenticated. Value = 3: Internal error Value = 4: Out of sequence frame Value = 5: Un-supported algorithm Value = 6: Invalid frame length Value = 7: WEP is required on the AP Value = 8: WEP not allowed Value = 9: Challenge text mismatch Enumeration: 'wepRequiredOnAP': 7, 'outOfSequenceFrame': 4, 'challengeTextMismatch': 9, 'internalError': 3, 'invalidModeOrState': 1, 'unsupportedAlgorithm': 5, 'wepNotAllowed': 8, 'invalidFrameLngth': 6, 'unAuthenticatedStation': 2.
                             apNotificationDot11IpAddress 1.3.6.1.4.1.52.4.13.100.1.5 ipaddress read-only
This value indicates the IP address of the Access Point
                             apNotificationDot11AuthenticatorMacAddr 1.3.6.1.4.1.52.4.13.100.1.6 macaddress read-only
This attribute holds the MAC address of the authenticator for the AP.
                         apNotificationTrapObjects 1.3.6.1.4.1.52.4.13.100.2
                             sysSystemUp 1.3.6.1.4.1.52.4.13.100.2.1
The system up notification shall be sent when the AP is fully up and running.
                             sysSystemDown 1.3.6.1.4.1.52.4.13.100.2.2
The system down notification shall be sent before the AP is about to reboot.
                             sysRadiusServerChanged 1.3.6.1.4.1.52.4.13.100.2.3
The RADIUS server changed notification shall be sent when the RADIUS server has changed from Primary / Secondary to Secondary / Primary.
                             dot11StationAssociation 1.3.6.1.4.1.52.4.13.100.2.4
The associate notification shall be sent when a station successfully associates with the Access Point. The value of the notification shall include the MAC address of the station that has associated.
                             dot11StationReAssociation 1.3.6.1.4.1.52.4.13.100.2.5
The re-associate notification shall be sent when a station successfully re-associates with the Access Point. The value of the notification shall include the MAC address of the station that has associated.
                             dot11StationAuthentication 1.3.6.1.4.1.52.4.13.100.2.6
The authentication notification shall be sent when a station successfully authenticates with the Access Point. The value of the notification shall include the MAC address of the station that has authenticated.
                             dot11StationRequestFail 1.3.6.1.4.1.52.4.13.100.2.7
The station request fail shall be sent out when a station fails to associate / re-associate / authenticate with the Access Point. The notification shall include the MAC address of the station and the reason code for the failure.
                             dot1xMacAddrAuthSuccess 1.3.6.1.4.1.52.4.13.100.2.9
The 802.1X MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the RADIUS server. The value of the notification shall include the MAC address of the station that has authenticated.
                             dot1xMacAddrAuthFail 1.3.6.1.4.1.52.4.13.100.2.10
The 802.1X MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the RADIUS server. The value of the notification shall include the MAC address of the station that failed to authenticate.
                             dot1xAuthNotInitiated 1.3.6.1.4.1.52.4.13.100.2.11
The 802.1X authentication not initiated notification shall be sent when a station did not initiate 802.1X authentication with the RADIUS server. The value of the notification shall include the MAC address of the station that did not initiate 802.1X authentication.
                             dot1xAuthSuccess 1.3.6.1.4.1.52.4.13.100.2.12
The 802.1X authentication success notification shall be sent when a station successfully authenticates with the RADIUS server. The value of the notification shall include the MAC address of the station that has authenticated.
                             dot1xAuthFail 1.3.6.1.4.1.52.4.13.100.2.13
The 802.1X authentication failure notification shall be sent when a station fails to authenticate with the RADIUS server. The value of the notification shall include the MAC address of the station that failed to authenticate.
                             localMacAddrAuthSuccess 1.3.6.1.4.1.52.4.13.100.2.14
The Local MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the database stored locally within the AP. The value of the notification shall include the MAC address of the station that has authenticated.
                             localMacAddrAuthFail 1.3.6.1.4.1.52.4.13.100.2.15
The Local MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the database stored locally within the AP. The value of the notification shall include the MAC address of the station that has authenticated.
                             pppLogonFail 1.3.6.1.4.1.52.4.13.100.2.16
The PPP Logon failure notification shall be sent out when the AP fails to login successfully to the PPP peer using the supplied username and password.
                             iappStationRoamedFrom 1.3.6.1.4.1.52.4.13.100.2.17
The IAPP Station Roamed-From Notification shall be sent out whenever a station roams from another Access Point (AP) to this AP. The notification shall include the MAC address of the station and the IP address of the old AP.
                             iappStationRoamedTo 1.3.6.1.4.1.52.4.13.100.2.18
The IAPP Station Roamed-To Notification shall be sent out whenever a station roams to another Access Point (AP) from this AP. The notification shall include the MAC address of the station and the IP address of the new AP.
                             iappContextDataSent 1.3.6.1.4.1.52.4.13.100.2.19
The IAPP Context Data Sent notification shall be sent out whenever the context data for a station has been sent to the new AP with which the station has associated. The notification shall include the MAC address of the station and the IP address of the new AP.
                             sntpServerFail 1.3.6.1.4.1.52.4.13.100.2.20
The sntpServerFail notification shall be sent when the AP fails to get time from the configured SNTP server.
                             dot11InterfaceAFail 1.3.6.1.4.1.52.4.13.100.2.21
The InterfaceAFail notification shall be sent out when 802.11a wireless interface has failed.
                             dot11InterfaceGFail 1.3.6.1.4.1.52.4.13.100.2.22
The InterfaceGFail notification shall be sent out when 802.11g wireless interface has failed.
                             dot11WirelessSTPDetection 1.3.6.1.4.1.52.4.13.100.2.23
The WirelessSTPDetection notification shall be sent out when wireless STP packet has detected.