CPQSASSWITCH-MIB: View SNMP OID List / Download MIB

VENDOR: COMPAQ


 Home MIB: CPQSASSWITCH-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cpqSasSwitch 1.3.6.1.4.1.232.25
       cpqSasSwitchMibRev 1.3.6.1.4.1.232.25.1
           cpqSasSwitchMibRevMajor 1.3.6.1.4.1.232.25.1.1 integer read-only
The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information, correct interpretation of data may require a MIB document with the same major revision level.
           cpqSasSwitchMibRevMinor 1.3.6.1.4.1.232.25.1.2 integer read-only
The Minor Revision level. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred.
           cpqSasSwitchMibCondition 1.3.6.1.4.1.232.25.1.3 integer read-only
The overall condition (status) of the system represented by this MIB. Enumeration: 'failed': 4, 'degraded': 3, 'other': 1, 'ok': 2.
       cpqSasSwitchComponent 1.3.6.1.4.1.232.25.2
           cpqSasSwitchInterface 1.3.6.1.4.1.232.25.2.1
               cpqSasSwitchOsCommon 1.3.6.1.4.1.232.25.2.1.4
           cpqSasSwitchHw 1.3.6.1.4.1.232.25.2.2
               cpqSasSwitchHwType 1.3.6.1.4.1.232.25.2.2.1
               cpqSasSwitchHwStatus 1.3.6.1.4.1.232.25.2.2.2 integer read-only
The Status of the SAS Switch. The switch can be in one of the following states: other(1) The switch is in a state other than one of those listed below. ok(2) Indicates that the switch is in normal operation mode. No user action is necessary. degraded(3) Indicates that the switch is operating in a degraded manner. User intervention required. failed(4) Indicates that the switch is in a failed state and is not operating. User action is required. Enumeration: 'failed': 4, 'degraded': 3, 'other': 1, 'ok': 2.
               cpqSasSwitchHwRedundancyState 1.3.6.1.4.1.232.25.2.2.3 integer read-only
The Redundancy State for the SAS Switch. The switch can be in one of the following redundant states: other(1) The switch is in a state other than one of those listed below. active(2) Indicates that the switch is acting in a redundant configuration and the switch is operating in the active state. No user action is necessary. standby(3) Indicates that the switch is acting in a redundant configuration and the switch is operating in the standby state. No user action is necessary. notConfigured(4) Indicates that the switch is in a non redundant configuration and the switch not configured correctly since the switch has been moved from a different location. User action is required. notRedundant(5) Indicates that the switch is operating is a non redundant configuration. No user action is necessary. degraded(6) Indicates that the switch cannot communicate with its partner switch. User action is necessary. mismatch(7) Indicates that there is a mismatch in firmware versions or zoning configurations between the redundant switches. User action is necessary to upgrade firmware or select desired zoning configuration by forcing appropriate switch to active state. Enumeration: 'notConfigured': 4, 'standby': 3, 'mismatch': 7, 'other': 1, 'active': 2, 'degraded': 6, 'notRedundant': 5.
         cpqSasSwitchTestTrap 1.3.6.1.4.1.232.250.1
SAS Switch Test Trap
         cpqSasSwitchHwStatusChangeTrap 1.3.6.1.4.1.232.250.101
SAS Switch Status change The switch has detected a change in the status. The new status is defined in cpqSasSwitchHwStatus.
         cpqSasSwitchHwRedundancyStateChangeTrap 1.3.6.1.4.1.232.250.201
SAS Switch Redundancy State change. The switch has detected a change in the redundancy operation mode. The new redundancy state is defined in cpqSasSwitchHwRedundancyState.
         cpqSasSwitchPhysicalDriveAddedTrap 1.3.6.1.4.1.232.250.301
SAS switch detected physical drive added to attached enclosure. The switch has detected a physical drive has been added to attached storage enclosure.
         cpqSasSwitchPhysicalDriveRemovedTrap 1.3.6.1.4.1.232.250.302
SAS switch detected physical drive removed from attached enclosure. The switch has detected a physical drive has been removed from attached storage enclosure.
         cpqSasSwitchStorageEnclosureAddedTrap 1.3.6.1.4.1.232.250.401
SAS switch detected storage enclosure added. The switch has detected a storage enclosure has been added.
         cpqSasSwitchStorageEnclosureRemovedTrap 1.3.6.1.4.1.232.250.402
SAS switch detected storage enclosure removed. The switch has detected a storage enclosure has been removed.