CPQCMC-MIB: View SNMP OID List / Download MIB

VENDOR: COMPAQ

Home	MIB: CPQCMC-MIB
Download as:		SNMPv2-CONF, CPQHOST-MIB, SNMPv2-MIB, SNMPv2-SMI, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
cpqCmc	1.3.6.1.4.1.232.153
cpqCmcMibRev	1.3.6.1.4.1.232.153.1
cpqCmcMibRevMajor	1.3.6.1.4.1.232.153.1.1	integer	read-only	The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information, correct interpretation of data may require a MIB document with the same major revision level.
cpqCmcMibRevMinor	1.3.6.1.4.1.232.153.1.2	integer	read-only	The Minor Revision level. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred.
cpqCmcMibCondition	1.3.6.1.4.1.232.153.1.3	integer	read-only	The overall condition (status) of the system (rack(s)) represented by this MIB. (2) OK (3) a minor problem, warning condition (yellow LED on CMC) (4) a major problem (red LED on CMC) Enumeration: 'failed': 4, 'degraded': 3, 'other': 1, 'ok': 2.
cpqCmcComponent	1.3.6.1.4.1.232.153.2
cpqCmcInterface	1.3.6.1.4.1.232.153.2.1
cpqCmcOsCommon	1.3.6.1.4.1.232.153.2.1.1
cpqCmcOsCommonPollFreq	1.3.6.1.4.1.232.153.2.1.1.1	integer	read-write	The Insight Agent's polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero (0) indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval.
cpqCmcDevice	1.3.6.1.4.1.232.153.2.2
cpqCmcDeviceCondition	1.3.6.1.4.1.232.153.2.2.1	integer	read-only	Condition of CMC device, (3) an overload of the 24V DC supply to the connected accessories occurred (4) the overload-protection (fuse) has released Enumeration: 'other': 1, 'ok': 2, 'fuseDC': 4, 'overloadDC': 3.
cpqCmcSetup	1.3.6.1.4.1.232.153.2.2.2
cpqCmcSetupConfig	1.3.6.1.4.1.232.153.2.2.2.1
cpqCmcSetupGeneral	1.3.6.1.4.1.232.153.2.2.2.1.1
cpqCmcsetLanguage	1.3.6.1.4.1.232.153.2.2.2.1.1.1	integer	read-write	Language of LCD Enumeration: 'german': 5, 'english': 2, 'dutch': 7, 'french': 3, 'japanese': 8, 'other': 1, 'spanish': 6, 'italian': 4.
cpqCmcsetTempUnit	1.3.6.1.4.1.232.153.2.2.2.1.1.2	integer	read-write	Unit of all temperature values and thresholds, Celsius or Fahrenheit Enumeration: 'fahrenheit': 3, 'other': 1, 'celsius': 2.
cpqCmcsetAudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.1.3	integer	read-write	Audible alarm in CMC unit: (2): silencing with button on CMC is enabled (3): silencing with button on CMC is disabled (4): audible alarm is off (general). On/off of audible alarm for each event is possible in cpqCmcsetupEvents-group Enumeration: 'disableSilence': 3, 'other': 1, 'off': 4, 'enableSilence': 2.
cpqCmcPassword	1.3.6.1.4.1.232.153.2.2.2.1.1.4	displaystring	read-write	Password to get access to terminal or LCD
cpqCmcPasswordOption	1.3.6.1.4.1.232.153.2.2.2.1.1.5	integer	read-write	Enable or disable password entry to get access to terminal or LCD Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcquitRelay1	1.3.6.1.4.1.232.153.2.2.2.1.1.6	integer	read-write	Enable or disable acknowledging currently active alarm relay 1 (with 'ENTER' on CMC). Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcquitRelay2	1.3.6.1.4.1.232.153.2.2.2.1.1.7	integer	read-write	Enable or disable acknowledging currently active alarm relay 2 (with 'ENTER' on CMC). Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmclogicRelay1	1.3.6.1.4.1.232.153.2.2.2.1.1.8	integer	read-write	Logic of Relay 1: (2) Relay will pick up in case of an alarm (3) Relay will release in case of an alarm (4) not used Enumeration: 'closeAtEPO': 4, 'other': 1, 'openAtAlarm': 3, 'closeAtAlarm': 2.
cpqCmclogicRelay2	1.3.6.1.4.1.232.153.2.2.2.1.1.9	integer	read-write	Logic of Relay 2: (2) Relay will pick up in case of an alarm (3) Relay will release in case of an alarm (4) not used Enumeration: 'closeAtEPO': 4, 'other': 1, 'openAtAlarm': 3, 'closeAtAlarm': 2.
cpqCmcSetupEvents	1.3.6.1.4.1.232.153.2.2.2.1.2
cpqCmcSetupTemp1	1.3.6.1.4.1.232.153.2.2.2.1.2.1
cpqCmcSetupTemp1Avail	1.3.6.1.4.1.232.153.2.2.2.1.2.1.1	integer	read-write	Temperature sensor: (2) sensor available (3) sensor not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupTemp1RelaysWarn	1.3.6.1.4.1.232.153.2.2.2.1.2.1.2	integer	read-write	Alert handling of Alarm Relays in case of warning condition of temperature sensor 1: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupTemp1RelaysMax	1.3.6.1.4.1.232.153.2.2.2.1.2.1.3	integer	read-write	Alert handling of Alarm Relays in case of max. alarm condition of temperature sensor 1: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupTemp1RelaysMin	1.3.6.1.4.1.232.153.2.2.2.1.2.1.4	integer	read-write	Alert handling of Alarm Relays in case of min. alarm condition of temperature sensor 1: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupTemp1AudibleAlarmWarn	1.3.6.1.4.1.232.153.2.2.2.1.2.1.5	integer	read-write	Alert handling of Audible Alarm of in case of warning condition of temperature sensor 1: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupTemp1AudibleAlarmMax	1.3.6.1.4.1.232.153.2.2.2.1.2.1.6	integer	read-write	Alert handling of Audible Alarm of in case of max. alarm condition of temperature sensor 1: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupTemp1AudibleAlarmMin	1.3.6.1.4.1.232.153.2.2.2.1.2.1.7	integer	read-write	Alert handling of Audible Alarm of in case of min. alarm condition of temperature sensor 1: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupTemp2	1.3.6.1.4.1.232.153.2.2.2.1.2.2
cpqCmcSetupTemp2Avail	1.3.6.1.4.1.232.153.2.2.2.1.2.2.1	integer	read-write	Temperature sensor: (2) sensor available (3) sensor not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupTemp2RelaysWarn	1.3.6.1.4.1.232.153.2.2.2.1.2.2.2	integer	read-write	Alert handling of Alarm Relays in case of warning condition of temperature sensor 2: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupTemp2RelaysMax	1.3.6.1.4.1.232.153.2.2.2.1.2.2.3	integer	read-write	Alert handling of Alarm Relays in case of max. alarm condition of temperature sensor 2: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupTemp2RelaysMin	1.3.6.1.4.1.232.153.2.2.2.1.2.2.4	integer	read-write	Alert handling of Alarm Relays in case of min. alarm condition of temperature sensor 2: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupTemp2AudibleAlarmWarn	1.3.6.1.4.1.232.153.2.2.2.1.2.2.5	integer	read-write	Alert handling of Audible Alarm of in case of warning condition of temperature sensor 2: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupTemp2AudibleAlarmMax	1.3.6.1.4.1.232.153.2.2.2.1.2.2.6	integer	read-write	Alert handling of Audible Alarm of in case of max. alarm condition of temperature sensor 2: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupTemp2AudibleAlarmMin	1.3.6.1.4.1.232.153.2.2.2.1.2.2.7	integer	read-write	Alert handling of Audible Alarm of in case of min. alarm condition of temperature sensor 2: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupFan1	1.3.6.1.4.1.232.153.2.2.2.1.2.3
cpqCmcSetupFan1Avail	1.3.6.1.4.1.232.153.2.2.2.1.2.3.1	integer	read-write	Fan 1: (2) Fan 1 available (3) Fan 1 not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupFan1Relays	1.3.6.1.4.1.232.153.2.2.2.1.2.3.2	integer	read-write	Alert handling of Alarm Relays in case of alarm condition of Fan 1: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupFan1AudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.3.3	integer	read-write	Alert handling of Audible Alarm of in case of alarm condition of Fan 1: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupFan2	1.3.6.1.4.1.232.153.2.2.2.1.2.4
cpqCmcSetupFan2Avail	1.3.6.1.4.1.232.153.2.2.2.1.2.4.1	integer	read-write	Fan 2: (2) Fan 2 available (3) Fan 2 not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupFan2Relays	1.3.6.1.4.1.232.153.2.2.2.1.2.4.2	integer	read-write	Alert handling of Alarm Relays in case of alarm condition of Fan 2: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupFan2AudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.4.3	integer	read-write	Alert handling of Audible Alarm of in case of alarm condition of Fan 2: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupVoltage	1.3.6.1.4.1.232.153.2.2.2.1.2.5
cpqCmcSetupVoltageAvail	1.3.6.1.4.1.232.153.2.2.2.1.2.5.1	integer	read-write	Voltage monitoring: (2) available (3) not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupVoltageRelaysMax	1.3.6.1.4.1.232.153.2.2.2.1.2.5.2	integer	read-write	Alert handling of Alarm Relays in case of max. alarm condition of voltage monitoring: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupVoltageRelaysMin	1.3.6.1.4.1.232.153.2.2.2.1.2.5.3	integer	read-write	Alert handling of Alarm Relays in case of min. alarm condition of voltage monitoring: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupVoltageAudibleAlarmMax	1.3.6.1.4.1.232.153.2.2.2.1.2.5.4	integer	read-write	Alert handling of Audible Alarm of in case of max. alarm condition of voltage monitoring: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupVoltageAudibleAlarmMin	1.3.6.1.4.1.232.153.2.2.2.1.2.5.5	integer	read-write	Alert handling of Audible Alarm of in case of min. alarm condition of voltage monitoring: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupHumidity	1.3.6.1.4.1.232.153.2.2.2.1.2.6
cpqCmcSetupHumidityAvail	1.3.6.1.4.1.232.153.2.2.2.1.2.6.1	integer	read-write	Humidity sensor: (2) available (3) not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupHumidityRelaysMax	1.3.6.1.4.1.232.153.2.2.2.1.2.6.2	integer	read-write	Alert handling of Alarm Relays in case of max. alarm condition of humidity monitoring: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupHumidityRelaysMin	1.3.6.1.4.1.232.153.2.2.2.1.2.6.3	integer	read-write	Alert handling of Alarm Relays in case of min. alarm condition of humidity monitoring: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupHumidityAudibleAlarmMax	1.3.6.1.4.1.232.153.2.2.2.1.2.6.4	integer	read-write	Alert handling of Audible Alarm of in case of max. alarm condition of humidity monitoring: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupHumidityAudibleAlarmMin	1.3.6.1.4.1.232.153.2.2.2.1.2.6.5	integer	read-write	Alert handling of Audible Alarm of in case of min. alarm condition of humidity monitoring: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupInput1	1.3.6.1.4.1.232.153.2.2.2.1.2.7
cpqCmcSetupInput1Avail	1.3.6.1.4.1.232.153.2.2.2.1.2.7.1	integer	read-write	Input 1 sensor: (2) available (3) not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupInput1Relays	1.3.6.1.4.1.232.153.2.2.2.1.2.7.2	integer	read-write	Alert handling of Alarm Relays in case of a warning condition of Input 1 (Door/Sidewall open): (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupInput1AudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.7.3	integer	read-write	Alert handling of Audible Alarm of in case of a warning condition of Input 1 (Door/Sidewall open): (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupInput1FansOff	1.3.6.1.4.1.232.153.2.2.2.1.2.7.4	integer	read-write	Fan switching off if Door/Sidewall 1 is opened: (2) both fans would be switched off (3) only fan1 will be switched off (4) only fan2 will be switched off (5) no fan will be switched off Enumeration: 'fan1': 3, 'both': 2, 'other': 1, 'noFan': 5, 'fan2': 4.
cpqCmcSetupInput1ShockSensor	1.3.6.1.4.1.232.153.2.2.2.1.2.7.5	integer	read-write	Shock sensor function if Door/Sidewall 1 is opened: (2) Shock Sensor is off (disabled) (3) Shock Sensor is on (enabled) Enumeration: 'on': 3, 'other': 1, 'off': 2.
cpqCmcSetupInput1Description	1.3.6.1.4.1.232.153.2.2.2.1.2.7.6	displaystring	read-write	Descriptional text of Input1
cpqCmcSetupInput1Lock	1.3.6.1.4.1.232.153.2.2.2.1.2.7.7	integer	read-write	Door/Sidewall 1 is locked by: (2) no locking device (3) locking device 1 (4) locking device 2 (5) both locking devices Enumeration: 'lock2': 4, 'both': 5, 'none': 2, 'other': 1, 'lock1': 3.
cpqCmcSetupInput2	1.3.6.1.4.1.232.153.2.2.2.1.2.8
cpqCmcSetupInput2Avail	1.3.6.1.4.1.232.153.2.2.2.1.2.8.1	integer	read-write	Input 2 sensor: (2) available (3) not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupInput2Relays	1.3.6.1.4.1.232.153.2.2.2.1.2.8.2	integer	read-write	Alert handling of Alarm Relays in case of a warning condition of Input 2 (Door/Sidewall open): (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupInput2AudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.8.3	integer	read-write	Alert handling of Audible Alarm of in case of a warning condition of Input 2 (Door/Sidewall open): (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupInput2FansOff	1.3.6.1.4.1.232.153.2.2.2.1.2.8.4	integer	read-write	Fan switching off if Door/Sidewall 2 is opened: (2) both fans would be switched off (3) only fan1 will be switched off (4) only fan2 will be switched off (5) no fan will be switched off Enumeration: 'fan1': 3, 'both': 2, 'other': 1, 'noFan': 5, 'fan2': 4.
cpqCmcSetupInput2ShockSensor	1.3.6.1.4.1.232.153.2.2.2.1.2.8.5	integer	read-write	Shock sensor function if Door/Sidewall 2 is opened: (2) Shock Sensor is off (disabled) (3) Shock Sensor is on (enabled) Enumeration: 'on': 3, 'other': 1, 'off': 2.
cpqCmcSetupInput2Description	1.3.6.1.4.1.232.153.2.2.2.1.2.8.6	displaystring	read-write	Descriptional text of Input2
cpqCmcSetupInput2Lock	1.3.6.1.4.1.232.153.2.2.2.1.2.8.7	integer	read-write	Door/Sidewall 2 is locked by: (2) no locking device (3) locking device 1 (4) locking device 2 (5) both locking devices Enumeration: 'lock2': 4, 'both': 5, 'none': 2, 'other': 1, 'lock1': 3.
cpqCmcSetupInput3	1.3.6.1.4.1.232.153.2.2.2.1.2.9
cpqCmcSetupInput3Avail	1.3.6.1.4.1.232.153.2.2.2.1.2.9.1	integer	read-write	Input 3 sensor: (2) available (3) not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupInput3Relays	1.3.6.1.4.1.232.153.2.2.2.1.2.9.2	integer	read-write	Alert handling of Alarm Relays in case of a warning condition of Input 3 (Door/Sidewall open): (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupInput3AudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.9.3	integer	read-write	Alert handling of Audible Alarm of in case of a warning condition of Input 3 (Door/Sidewall open): (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupInput3FansOff	1.3.6.1.4.1.232.153.2.2.2.1.2.9.4	integer	read-write	Fan switching off if Door/Sidewall 3 is opened: (2) both fans would be switched off (3) only fan1 will be switched off (4) only fan2 will be switched off (5) no fan will be switched off Enumeration: 'fan1': 3, 'both': 2, 'other': 1, 'noFan': 5, 'fan2': 4.
cpqCmcSetupInput3ShockSensor	1.3.6.1.4.1.232.153.2.2.2.1.2.9.5	integer	read-write	Shock sensor function if Door/Sidewall 3 is opened: (2) Shock Sensor is off (disabled) (3) Shock Sensor is on (enabled) Enumeration: 'on': 3, 'other': 1, 'off': 2.
cpqCmcSetupInput3Description	1.3.6.1.4.1.232.153.2.2.2.1.2.9.6	displaystring	read-write	Descriptional text of Input3
cpqCmcSetupInput3Lock	1.3.6.1.4.1.232.153.2.2.2.1.2.9.7	integer	read-write	Door/Sidewall 3 is locked by: (2) no locking device (3) locking device 1 (4) locking device 2 (5) both locking devices Enumeration: 'lock2': 4, 'both': 5, 'none': 2, 'other': 1, 'lock1': 3.
cpqCmcSetupInput4	1.3.6.1.4.1.232.153.2.2.2.1.2.10
cpqCmcSetupInput4Avail	1.3.6.1.4.1.232.153.2.2.2.1.2.10.1	integer	read-write	Input 4 sensor: (2) available (3) not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupInput4Relays	1.3.6.1.4.1.232.153.2.2.2.1.2.10.2	integer	read-write	Alert handling of Alarm Relays in case of a warning condition of Input 4 (Door/Sidewall open): (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupInput4AudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.10.3	integer	read-write	Alert handling of Audible Alarm of in case of a warning condition of Input 4 (Door/Sidewall open): (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupInput4FansOff	1.3.6.1.4.1.232.153.2.2.2.1.2.10.4	integer	read-write	Fan switching off if Door/Sidewall 4 is opened: (2) both fans would be switched off (3) only fan1 will be switched off (4) only fan2 will be switched off (5) no fan will be switched off Enumeration: 'fan1': 3, 'both': 2, 'other': 1, 'noFan': 5, 'fan2': 4.
cpqCmcSetupInput4ShockSensor	1.3.6.1.4.1.232.153.2.2.2.1.2.10.5	integer	read-write	Shock sensor function if Door/Sidewall 4 is opened: (2) Shock Sensor is off (disabled) (3) Shock Sensor is on (enabled) Enumeration: 'on': 3, 'other': 1, 'off': 2.
cpqCmcSetupInput4Description	1.3.6.1.4.1.232.153.2.2.2.1.2.10.6	displaystring	read-write	Descriptional text of Input4
cpqCmcSetupInput4Lock	1.3.6.1.4.1.232.153.2.2.2.1.2.10.7	integer	read-write	Door/Sidewall 4 is locked by: (2) no locking device (3) locking device 1 (4) locking device 2 (5) both locking devices Enumeration: 'lock2': 4, 'both': 5, 'none': 2, 'other': 1, 'lock1': 3.
cpqCmcSetupLock1	1.3.6.1.4.1.232.153.2.2.2.1.2.11
cpqCmcSetupLock1Avail	1.3.6.1.4.1.232.153.2.2.2.1.2.11.1	integer	read-write	Door locking device 1: (2) device available (3) device not available, no alarm, if door is not locked Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupLock1Relays	1.3.6.1.4.1.232.153.2.2.2.1.2.11.2	integer	read-write	Alert handling of Alarm Relays in case of an alarm condition of Lock 1 (door not locked..): (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupLock1RelaysDevice	1.3.6.1.4.1.232.153.2.2.2.1.2.11.3	integer	read-write	Alert handling of Alarm Relays in case of an alarm condition of Locking device 1 (power fail, low battery...): (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupLock1AudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.11.4	integer	read-write	Alert handling of Audible Alarm of in case of an alarm condition of Lock 1: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupLock1AudibleAlarmDevice	1.3.6.1.4.1.232.153.2.2.2.1.2.11.5	integer	read-write	Alert handling of Audible Alarm of in case of an alarm condition of Locking device 1 (power fail, low battery..): (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupLock1Time	1.3.6.1.4.1.232.153.2.2.2.1.2.11.6	integer	read-write	Time in seconds while the lock 1 is unlocked after getting an unlock-command
cpqCmcSetupLock1PwrFailUnlock	1.3.6.1.4.1.232.153.2.2.2.1.2.11.7	integer	read-write	Unlock door in case of power fail of locking device: (2) disabled (3) auto unlock the door (4) unlock door with remote signal Enumeration: 'disabled': 2, 'auto': 3, 'other': 1, 'manual': 4.
cpqCmcSetupLock1BattLowUnlock	1.3.6.1.4.1.232.153.2.2.2.1.2.11.8	integer	read-write	Unlock door in case of low battery of locking device: (2) disabled (3) auto unlock the door (4) unlock door with remote signal Enumeration: 'disabled': 2, 'auto': 3, 'other': 1, 'manual': 4.
cpqCmcSetupLock1NetFailUnlock	1.3.6.1.4.1.232.153.2.2.2.1.2.11.9	integer	read-write	Unlock door in case of network failure: (2) disabled (3) auto unlock the door (4) unlock door with remote signal Enumeration: 'disabled': 2, 'auto': 3, 'other': 1, 'manual': 4.
cpqCmcSetupLock1LifeFailUnlock	1.3.6.1.4.1.232.153.2.2.2.1.2.11.10	integer	read-write	Unlock door in case of lifecheck failure (connection CMC<->locking device): (2) disabled (3) auto unlock the door (4) unlock door with remote signal Enumeration: 'disabled': 2, 'auto': 3, 'other': 1, 'manual': 4.
cpqCmcSetupLock2	1.3.6.1.4.1.232.153.2.2.2.1.2.12
cpqCmcSetupLock2Avail	1.3.6.1.4.1.232.153.2.2.2.1.2.12.1	integer	read-write	Door locking device 2: (2) device available (3) device not available, no alarm, if door is not locked Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupLock2Relays	1.3.6.1.4.1.232.153.2.2.2.1.2.12.2	integer	read-write	Alert handling of Alarm Relays in case of an alarm condition of Lock 2 (door not locked..): (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupLock2RelaysDevice	1.3.6.1.4.1.232.153.2.2.2.1.2.12.3	integer	read-write	Alert handling of Alarm Relays in case of an alarm condition of Locking device 2 (power fail, low battery...): (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupLock2AudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.12.4	integer	read-write	Alert handling of Audible Alarm of in case of an alarm condition of Lock 2: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupLock2AudibleAlarmDevice	1.3.6.1.4.1.232.153.2.2.2.1.2.12.5	integer	read-write	Alert handling of Audible Alarm of in case of an alarm condition of Locking device 2 (power fail, low battery..): (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupLock2Time	1.3.6.1.4.1.232.153.2.2.2.1.2.12.6	integer	read-write	Time in seconds while the lock 2 is unlocked after getting an unlock-command
cpqCmcSetupLock2PwrFailUnlock	1.3.6.1.4.1.232.153.2.2.2.1.2.12.7	integer	read-write	Unlock door in case of power fail of locking device: (2) disabled (3) auto unlock the door (4) unlock door with remote signal Enumeration: 'disabled': 2, 'auto': 3, 'other': 1, 'manual': 4.
cpqCmcSetupLock2BattLowUnlock	1.3.6.1.4.1.232.153.2.2.2.1.2.12.8	integer	read-write	Unlock door in case of low battery of locking device: (2) disabled (3) auto unlock the door (4) unlock door with remote signal Enumeration: 'disabled': 2, 'auto': 3, 'other': 1, 'manual': 4.
cpqCmcSetupLock2NetFailUnlock	1.3.6.1.4.1.232.153.2.2.2.1.2.12.9	integer	read-write	Unlock door in case of network failure: (2) disabled (3) auto unlock the door (4) unlock door with remote signal Enumeration: 'disabled': 2, 'auto': 3, 'other': 1, 'manual': 4.
cpqCmcSetupLock2LifeFailUnlock	1.3.6.1.4.1.232.153.2.2.2.1.2.12.10	integer	read-write	Unlock door in case of lifecheck failure (connection CMC<->locking device): (2) disabled (3) auto unlock the door (4) unlock door with remote signal Enumeration: 'disabled': 2, 'auto': 3, 'other': 1, 'manual': 4.
cpqCmcSetupSmoke	1.3.6.1.4.1.232.153.2.2.2.1.2.13
cpqCmcSetupSmokeAvail	1.3.6.1.4.1.232.153.2.2.2.1.2.13.1	integer	read-write	Smoke sensor: (2) available (3) not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupSmokeRelays	1.3.6.1.4.1.232.153.2.2.2.1.2.13.2	integer	read-write	Alert handling of Alarm Relays in case of an alarm condition of Smoke Sensor: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupSmokeAudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.13.3	integer	read-write	Alert handling of Audible Alarm of in case of an alarm condition of Smoke Sensor: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupSmokeFansOff	1.3.6.1.4.1.232.153.2.2.2.1.2.13.4	integer	read-write	Fan switching off if in case of smoke-alarm: (2) both fans would be switched off (3) only fan1 will be switched off (4) only fan2 will be switched off (5) no fan will be switched off Enumeration: 'fan1': 3, 'both': 2, 'other': 1, 'noFan': 5, 'fan2': 4.
cpqCmcSetupSmokeUnlock	1.3.6.1.4.1.232.153.2.2.2.1.2.13.5	integer	read-write	Lock is unlocked in case of smoke-alarm: (2) both locks will be unlocked (3) only lock1 will be unlocked (4) only lock2 will be unlocked (5) no lock will be unlocked Enumeration: 'lock2': 4, 'both': 2, 'other': 1, 'noLock': 5, 'lock1': 3.
cpqCmcSetupShock	1.3.6.1.4.1.232.153.2.2.2.1.2.14
cpqCmcSetupShockAvail	1.3.6.1.4.1.232.153.2.2.2.1.2.14.1	integer	read-write	Shock sensor: (2) available (3) not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupShockRelays	1.3.6.1.4.1.232.153.2.2.2.1.2.14.2	integer	read-write	Alert handling of Alarm Relays in case of an alarm condition of Shock Sensor: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupShockAudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.14.3	integer	read-write	Alert handling of Audible Alarm of in case of an alarm condition of Shock Sensor: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupShockSensitivity	1.3.6.1.4.1.232.153.2.2.2.1.2.14.4	integer	read-write	Sensitivity of shock-sensor. 1 = low sensitivity, 10 = high sensitivity
cpqCmcSetupAux1	1.3.6.1.4.1.232.153.2.2.2.1.2.15
cpqCmcSetupAux1Avail	1.3.6.1.4.1.232.153.2.2.2.1.2.15.1	integer	read-write	Aux 1 sensor: (2) available (3) not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupAux1Relays	1.3.6.1.4.1.232.153.2.2.2.1.2.15.2	integer	read-write	Alert handling of Alarm Relays in case of an alarm condition of Aux 1: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupAux1AudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.15.3	integer	read-write	Alert handling of Audible Alarm of in case of an alarm condition of Aux 1: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupAux1InputType	1.3.6.1.4.1.232.153.2.2.2.1.2.15.4	integer	read-write	Type of other digital input (used for any digital signal): (2) contact is normally open, no alarm if contact is open, alarm if contact is closed (3) contact is normally closed, no alarm if contact is closed, alarm if contact is open Enumeration: 'normOpen': 2, 'other': 1, 'normClosed': 3.
cpqCmcSetupAux1Description	1.3.6.1.4.1.232.153.2.2.2.1.2.15.5	displaystring	read-write	Descriptional text of the digital input (Aux1)
cpqCmcSetupAux1Unlock	1.3.6.1.4.1.232.153.2.2.2.1.2.15.6	integer	read-write	Lock will be unlocked with Aux-Input 1: (2) no lock will be unlocked (3) only lock1 will be unlocked (4) only lock2 will be unlocked (5) both locks will be unlocked Enumeration: 'lock2': 4, 'lock1': 3, 'other': 1, 'noLock': 2, 'both': 5.
cpqCmcSetupAux2	1.3.6.1.4.1.232.153.2.2.2.1.2.16
cpqCmcSetupAux2Avail	1.3.6.1.4.1.232.153.2.2.2.1.2.16.1	integer	read-write	Aux 2 sensor: (2) available (3) not available Enumeration: 'available': 2, 'notAvailable': 3, 'other': 1.
cpqCmcSetupAux2Relays	1.3.6.1.4.1.232.153.2.2.2.1.2.16.2	integer	read-write	Alert handling of Alarm Relays in case of an alarm condition of Aux 2: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupAux2AudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.16.3	integer	read-write	Alert handling of Audible Alarm of in case of an alarm condition of Aux 2: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupAux2InputType	1.3.6.1.4.1.232.153.2.2.2.1.2.16.4	integer	read-write	Type of other digital input (used for any digital signal): (2) contact is normally open, no alarm if contact is open, alarm if contact is closed (3) contact is normally closed, no alarm if contact is closed, alarm if contact is open Enumeration: 'normOpen': 2, 'other': 1, 'normClosed': 3.
cpqCmcSetupAux2Description	1.3.6.1.4.1.232.153.2.2.2.1.2.16.5	displaystring	read-write	Descriptional text of the digital input (Aux2)
cpqCmcSetupAux2Unlock	1.3.6.1.4.1.232.153.2.2.2.1.2.16.6	integer	read-write	Lock will be unlocked with Aux-Input 2: (2) no lock will be unlocked (3) only lock1 will be unlocked (4) only lock2 will be unlocked (5) both locks will be unlocked Enumeration: 'lock2': 4, 'lock1': 3, 'other': 1, 'noLock': 2, 'both': 5.
cpqCmcSetupAlarm1	1.3.6.1.4.1.232.153.2.2.2.1.2.17
cpqCmcSetupAlarm1Relays	1.3.6.1.4.1.232.153.2.2.2.1.2.17.1	integer	read-write	Alert handling of Alarm Relays in case of an alarm condition of Alarm 1: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupAlarm1AudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.17.2	integer	read-write	Alert handling of Audible Alarm of in case of an alarm condition of Alarm 1: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupAlarm1Description	1.3.6.1.4.1.232.153.2.2.2.1.2.17.3	displaystring	read-write	Descriptional text of alarm 1
cpqCmcSetupAlarm2	1.3.6.1.4.1.232.153.2.2.2.1.2.18
cpqCmcSetupAlarm2Relays	1.3.6.1.4.1.232.153.2.2.2.1.2.18.1	integer	read-write	Alert handling of Alarm Relays in case of an alarm condition of Alarm 2: (2) no switching of Relays (3) Relay 1 will switch (4) Relay 2 will switch (5) both Relays will switch Enumeration: 'both': 5, 'other': 1, 'off': 2, 'relay2': 4, 'relay1': 3.
cpqCmcSetupAlarm2AudibleAlarm	1.3.6.1.4.1.232.153.2.2.2.1.2.18.2	integer	read-write	Alert handling of Audible Alarm of in case of an alarm condition of Alarm 2: (2) Start Audible Alarm (3) No Audible Alarm Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcSetupAlarm2Description	1.3.6.1.4.1.232.153.2.2.2.1.2.18.3	displaystring	read-write	Descriptional text of alarm 2
cpqCmcSetupClock	1.3.6.1.4.1.232.153.2.2.2.1.3
cpqCmcSetupDate	1.3.6.1.4.1.232.153.2.2.2.1.3.1	displaystring	read-write	actual Date in format DD.MM.YYYY
cpqCmcSetupTime	1.3.6.1.4.1.232.153.2.2.2.1.3.2	displaystring	read-write	actual Time in format HH:MM:SS, HH (0-23), MM (0-59), SS (0-59)
cpqCmcSetupThreshold	1.3.6.1.4.1.232.153.2.2.2.2
cpqCmcThresholdMaxTemp1	1.3.6.1.4.1.232.153.2.2.2.2.1	integer	read-write	Threshold value maximum temperature 1
cpqCmcThresholdWarningTemp1	1.3.6.1.4.1.232.153.2.2.2.2.2	integer	read-write	Threshold value warning temperature 1
cpqCmcThresholdMinTemp1	1.3.6.1.4.1.232.153.2.2.2.2.3	integer	read-write	Threshold value minimum temperature 1
cpqCmcThresholdMaxTemp2	1.3.6.1.4.1.232.153.2.2.2.2.4	integer	read-write	Threshold value maximum temperature 2
cpqCmcThresholdWarningTemp2	1.3.6.1.4.1.232.153.2.2.2.2.5	integer	read-write	Threshold value warning temperature 2
cpqCmcThresholdMinTemp2	1.3.6.1.4.1.232.153.2.2.2.2.6	integer	read-write	Threshold value minimum temperature 2
cpqCmcThresholdFan1	1.3.6.1.4.1.232.153.2.2.2.2.7	integer	read-write	Threshold Fan 1 in deg F or deg C, Fan 1 will start if temperature 1 exceeds this value
cpqCmcThresholdFan1Hysteresis	1.3.6.1.4.1.232.153.2.2.2.2.8	integer	read-write	Hystersis of Fan 1, Fan 1 will stop if temperature 1 falls below value of cpqCmcThresholdFan1 minus cpqCmcThresholdFan1Hysteresis
cpqCmcThresholdFan2	1.3.6.1.4.1.232.153.2.2.2.2.9	integer	read-write	Threshold Fan 2 in deg F or deg C, Fan 2 will start if temperature 2 exceeds this value
cpqCmcThresholdFan2Hysteresis	1.3.6.1.4.1.232.153.2.2.2.2.10	integer	read-write	Hystersis of Fan 2, Fan 2 will stop if temperature 2 falls below value of cpqCmcThresholdFan2 minus cpqCmcThresholdFan2Hysteresis
cpqCmcThresholdMaxVoltage	1.3.6.1.4.1.232.153.2.2.2.2.11	integer	read-write	Threshold high value Voltage alarm
cpqCmcThresholdMinVoltage	1.3.6.1.4.1.232.153.2.2.2.2.12	integer	read-write	Threshold low value Voltage alarm
cpqCmcThresholdMaxHumidity	1.3.6.1.4.1.232.153.2.2.2.2.13	integer	read-write	Threshold high value Humidity alarm
cpqCmcThresholdMinHumidity	1.3.6.1.4.1.232.153.2.2.2.2.14	integer	read-write	Threshold low value Humidity alarm
cpqCmcTraps	1.3.6.1.4.1.232.153.2.2.2.3
cpqCmcTrapTableNumber	1.3.6.1.4.1.232.153.2.2.2.3.1	integer	read-only	Number of trapTable entries. The number of trap-receivers
cpqCmcTrapTable	1.3.6.1.4.1.232.153.2.2.2.3.2		no-access	A list of trap-receiver entries
cpqCmcTrapEntry	1.3.6.1.4.1.232.153.2.2.2.3.2.1		no-access	Entries of trapTable
cpqCmcTrapIndex	1.3.6.1.4.1.232.153.2.2.2.3.2.1.1	integer	read-only	Index for the trap-receiver-table. Its value ranges between 1 and the value of cpqCmcTrapTableNumber
cpqCmcTrapStatus	1.3.6.1.4.1.232.153.2.2.2.3.2.1.2	integer	read-write	Enable or disable trap receiver Enumeration: 'disabled': 3, 'other': 1, 'enabled': 2.
cpqCmcTrapIPaddress	1.3.6.1.4.1.232.153.2.2.2.3.2.1.3	displaystring	read-write	IP-address of trap-receiver
cpqCmcValues	1.3.6.1.4.1.232.153.2.2.3
cpqCmcValueTemp1	1.3.6.1.4.1.232.153.2.2.3.1	integer	read-only	Actual temperature value of temperature sensor 1 in deg C or deg F
cpqCmcValueTemp2	1.3.6.1.4.1.232.153.2.2.3.2	integer	read-only	Actual temperature value of temperature sensor 2 in deg C or deg F
cpqCmcValueVoltage	1.3.6.1.4.1.232.153.2.2.3.3	integer	read-only	Actual value of power supply (voltage monitoring and fans) in V
cpqCmcValueHumidity	1.3.6.1.4.1.232.153.2.2.3.4	integer	read-only	Actual value of humidity 0..100%
cpqCmcValueOperatingTime	1.3.6.1.4.1.232.153.2.2.3.5	displaystring	read-only	Operating time CMC-unit
cpqCmcStatus	1.3.6.1.4.1.232.153.2.2.4
cpqCmcStatusTemp1	1.3.6.1.4.1.232.153.2.2.4.1	integer	read-only	The status of temperature 1, see thresholds of temperature 1: (2) temperature normal (3) temperature exceeds warning threshold (4) temperature exceeds max. threshold (5) temperature drops under min. threshold (6) no sensor connected, not available (7) error, sensor disconnected Enumeration: 'overMax': 4, 'normal': 2, 'underMin': 5, 'noSensor': 6, 'error': 7, 'warning': 3, 'other': 1.
cpqCmcStatusTemp2	1.3.6.1.4.1.232.153.2.2.4.2	integer	read-only	The status of temperature 2, see thresholds of temperature 2: (2) temperature normal (3) temperature exceeds warning threshold (4) temperature exceeds max. threshold (5) temperature drops under min. threshold (6) no sensor connected, not available (7) error, sensor disconnected Enumeration: 'overMax': 4, 'normal': 2, 'underMin': 5, 'noSensor': 6, 'error': 7, 'warning': 3, 'other': 1.
cpqCmcStatusFan1	1.3.6.1.4.1.232.153.2.2.4.3	integer	read-only	The status of fan 1: (2) fan is switched off by temperature sensor 1 (3) fan is switched on by temperature sensor 1 (4) fan is switched off by Manual Control (cpqCmcSetFan1) (5) fan is switched on by Manual Control (cpqCmcSetFan1) (6) fan is switched off because of smoke alarm (7) fan is switched off because door is open (8) no fan (9) fan error, current monitoring Enumeration: 'doorOff': 7, 'manualOff': 4, 'smokeOff': 6, 'noFan': 8, 'autoOn': 3, 'other': 1, 'manualOn': 5, 'error': 9, 'autoOff': 2.
cpqCmcStatusFan2	1.3.6.1.4.1.232.153.2.2.4.4	integer	read-only	The status of fan 2: (2) fan is switched off by temperature sensor 2 (3) fan is switched on by temperature sensor 2 (4) fan is switched off by Manual Control (cpqCmcSetFan2) (5) fan is switched on by Manual Control (cpqCmcSetFan2) (6) fan is switched off because of smoke alarm (7) fan is switched off because door is open (8) no fan (9) fan error, current monitoring Enumeration: 'doorOff': 7, 'manualOff': 4, 'smokeOff': 6, 'noFan': 8, 'autoOn': 3, 'other': 1, 'manualOn': 5, 'error': 9, 'autoOff': 2.
cpqCmcStatusVoltage	1.3.6.1.4.1.232.153.2.2.4.5	integer	read-only	The voltage-status, see thresholds of power supply: (2) voltage normal (3) voltage exceeds max. threshold (4) voltage drops under min. threshold (5) no power connected Enumeration: 'overMax': 3, 'other': 1, 'noVoltage': 5, 'underMin': 4, 'normal': 2.
cpqCmcStatusHumidity	1.3.6.1.4.1.232.153.2.2.4.6	integer	read-only	The humidity-status, see thresholds of humidity: (2) humidity normal (3) humidity exceeds max. threshold (4) humidity drops under min. threshold (5) no sensor connected, not available (6) error, sensor disconnected Enumeration: 'overMax': 3, 'normal': 2, 'underMin': 4, 'noSensor': 5, 'error': 6, 'other': 1.
cpqCmcStatusInput1	1.3.6.1.4.1.232.153.2.2.4.7	integer	read-only	The status of door/sidepanel 1, closed (2), open (3) or no sensor connected (4) Enumeration: 'noSensor': 4, 'other': 1, 'open': 3, 'closed': 2.
cpqCmcStatusInput2	1.3.6.1.4.1.232.153.2.2.4.8	integer	read-only	The status of door/sidepanel 2, closed (2), open (3) or no sensor connected (4) Enumeration: 'noSensor': 4, 'other': 1, 'open': 3, 'closed': 2.
cpqCmcStatusInput3	1.3.6.1.4.1.232.153.2.2.4.9	integer	read-only	The status of door/sidepanel 3, closed (2), open (3) or no sensor connected (4) Enumeration: 'noSensor': 4, 'other': 1, 'open': 3, 'closed': 2.
cpqCmcStatusInput4	1.3.6.1.4.1.232.153.2.2.4.10	integer	read-only	The status of door/sidepanel 4, closed (2), open (3) or no sensor connected (4) Enumeration: 'noSensor': 4, 'other': 1, 'open': 3, 'closed': 2.
cpqCmcStatusLock1Lock	1.3.6.1.4.1.232.153.2.2.4.11	integer	read-only	The status of door locking 1 (2) Door locking-device is activated, door is locked (3) Door locking-device is not activated, door is unlocked by Network Management (4) Door locking-device is not activated for x sec, time see cpqCmcSetupLock1Time, door is unlocked by Network Management (5) Door locking-device is not activated, door is unlocked because of Smoke alarm (6) Door is unlocked from remote-signal (7) Door locking-device is not activated, door is unlocked because of Power Fail of locking device (8) Door locking-device is not activated, door is unlocked because of low Battery of locking device (9) Door locking-device is not activated, door is unlocked because of Network Fail (10)Door locking-device is not activated, door is unlocked because of connection fail, no connection locking device <-> CMC (11)Door locking-device is ready to lock, lock will be activated after doors are closed (12)Door locking-device is activated but door is not locked, alarm (13)Configuration error, association door to locking-device missing (14)Lock not installed Enumeration: 'configError': 13, 'unlockedNetFail': 9, 'locked': 2, 'unlockedTime': 4, 'alarm': 12, 'unlockedSmoke': 5, 'unlockedPwrFail': 7, 'unlockedConnFail': 10, 'other': 1, 'readyToLock': 11, 'unlockedBattLow': 8, 'unlockedAuto': 3, 'unlockedKey': 6, 'notAvail': 14.
cpqCmcStatusLock2Lock	1.3.6.1.4.1.232.153.2.2.4.12	integer	read-only	The status of door locking 2 (2) Door locking-device is activated, door is locked (3) Door locking-device is not activated, door is unlocked by Network Management (4) Door locking-device is not activated for x sec, time see cpqCmcSetupLock1Time, door is unlocked by Network Management (5) Door locking-device is not activated, door is unlocked because of Smoke alarm (6) Door is unlocked from remote-signal (7) Door locking-device is not activated, door is unlocked because of Power Fail of locking device (8) Door locking-device is not activated, door is unlocked because of low Battery of locking device (9) Door locking-device is not activated, door is unlocked because of Network Fail (10)Door locking-device is not activated, door is unlocked because of connection fail, no connection locking device <-> CMC (11)Door locking-device is ready to lock, lock will be activated after doors are closed (12)Door locking-device is activated but door is not locked, alarm (13)Configuration error, association door to locking-device missing (14)Lock not installed Enumeration: 'configError': 13, 'unlockedNetFail': 9, 'locked': 2, 'unlockedTime': 4, 'alarm': 12, 'unlockedSmoke': 5, 'unlockedPwrFail': 7, 'unlockedConnFail': 10, 'other': 1, 'readyToLock': 11, 'unlockedBattLow': 8, 'unlockedAuto': 3, 'unlockedKey': 6, 'notAvail': 14.
cpqCmcStatusSmoke	1.3.6.1.4.1.232.153.2.2.4.13	integer	read-only	Status smoke-sensor, OK (2), smoke detected (3) or no sensor connected (4) Enumeration: 'noSensor': 4, 'other': 1, 'present': 3, 'cleared': 2.
cpqCmcStatusShock	1.3.6.1.4.1.232.153.2.2.4.14	integer	read-only	Status Shock sensor, OK (2), shock detected (3) or no sensor connected (4) Enumeration: 'noSensor': 4, 'other': 1, 'present': 3, 'cleared': 2.
cpqCmcStatusAux1	1.3.6.1.4.1.232.153.2.2.4.15	integer	read-only	Status aux. digital input Enumeration: 'noSensor': 4, 'alarm': 3, 'other': 1, 'ok': 2.
cpqCmcStatusAux2	1.3.6.1.4.1.232.153.2.2.4.16	integer	read-only	Status aux. digital input Enumeration: 'noSensor': 4, 'alarm': 3, 'other': 1, 'ok': 2.
cpqCmcStatusAlarm1	1.3.6.1.4.1.232.153.2.2.4.17	integer	read-only	Status of alarm 1, see cmpCmcsetAlarm1. This alarm can be set from the Network management system. A descriptional text for this alarm can be set in cpqCmcSetupAlarm1Description. Enumeration: 'alarm': 3, 'other': 1, 'ok': 2.
cpqCmcStatusAlarm2	1.3.6.1.4.1.232.153.2.2.4.18	integer	read-only	Status of alarm 2, see cmpCmcsetAlarm2. This alarm can be set from the Network management system. A descriptional text for this alarm can be set in cpqCmcSetupAlarm2Description. Enumeration: 'alarm': 3, 'other': 1, 'ok': 2.
cpqCmcStatusLock1Dev	1.3.6.1.4.1.232.153.2.2.4.19	integer	read-only	The status of door-locking device 1 (2) OK (3) Power fail of door locking-device (4) Low Battery of door locking-device (5) Battery of door locking device needs to be replaced (6) Battery missing, insert all batteries (7) Connection CMC->door locking device lost (8) Lock not installed Enumeration: 'powerFail': 3, 'lowBattery': 4, 'ok': 2, 'noConnect': 7, 'other': 1, 'replaceBatt': 5, 'notAvail': 8, 'missingBatt': 6.
cpqCmcStatusLock2Dev	1.3.6.1.4.1.232.153.2.2.4.20	integer	read-only	The status of door-locking device 2 (2) OK (3) Power fail of door locking-device (4) Low Battery of door locking-device (5) Battery of door locking device needs to be replaced (6) Battery missing, insert all batteries (6) Connection CMC->door locking device lost (7) Lock not installed Enumeration: 'powerFail': 3, 'lowBattery': 4, 'ok': 2, 'noConnect': 7, 'other': 1, 'replaceBatt': 5, 'notAvail': 8, 'missingBatt': 6.
cpqCmcControl	1.3.6.1.4.1.232.153.2.2.5
cpqCmcStatusAccess	1.3.6.1.4.1.232.153.2.2.5.1	displaystring	read-write	Status access, for future use
cpqCmcSetLock1Lock	1.3.6.1.4.1.232.153.2.2.5.2	integer	read-write	Set door locking device 1, see table With this command the management-station can set the conditions for the door locking device (2) Door will be locked (3) Door will be unlocked for a defined time, time can be changed, see cpqCmcSetupLock1Time (4) Door is generally unlocked Locking and unlocking with this command can not be enabled or disabled with cpqCmcSetLock1Key-command Enumeration: 'openDoor': 4, 'other': 1, 'lockDoor': 2, 'openDoorTime': 3.
cpqCmcSetLock1Key	1.3.6.1.4.1.232.153.2.2.5.3	integer	read-write	Enable or disable unlocking of the rack-door with external components like keypad or remote input. With this command the management station can set the conditions for unlocking the door: (2) unlocking is disabled, no unlocking with keypad or remote input (3) unlocking with keypad or remote signal (both) is enabled (4) unlocking with keypad (only) is enabled (5) unlocking with remote input (only) is enabled Unlocking door with the cpqCmcSetLock1Lock-command does not depend on this variable Enumeration: 'enableRemoteInput': 5, 'enableKeypad': 4, 'other': 1, 'enableBoth': 3, 'disable': 2.
cpqCmcSetLock2Lock	1.3.6.1.4.1.232.153.2.2.5.4	integer	read-write	Set door locking device 2, see table With this command the management-station can set the conditions for the door locking device (2) Door will be locked (3) Door will be unlocked for a defined time, time can be changed, see cpqCmcSetupLock2Time (4) Door is generally unlocked Locking and unlocking with this command can not be enabled or disabled with cpqCmcSetLock2Key-command Enumeration: 'openDoor': 4, 'other': 1, 'lockDoor': 2, 'openDoorTime': 3.
cpqCmcSetLock2Key	1.3.6.1.4.1.232.153.2.2.5.5	integer	read-write	Enable or disable unlocking of the rack-door with external components like keypad or remote input. With this command the management-station can set the conditions for unlocking the door: (2) unlocking is disabled, no unlocking with keypad or remote input (3) unlocking with keypad or remote signal (both) is enabled (4) unlocking with keypad (only) is enabled (5) unlocking with remote input (only) is enabled Unlocking door with the cpqCmcSetDoor2-command does not depend on this variable Enumeration: 'enableRemoteInput': 5, 'enableKeypad': 4, 'other': 1, 'enableBoth': 3, 'disable': 2.
cpqCmcSetMessage	1.3.6.1.4.1.232.153.2.2.5.6	displaystring	read-write	Set message to CMC, for future use
cpqCmcSetAlarm1	1.3.6.1.4.1.232.153.2.2.5.7	integer	read-write	Is used to set an alarm in the CMC from the management-station. With this command the management-station can i.e. switch on an alarm-relay or the AudibleAlarm of the CMC. Can be used for alert-handling Enumeration: 'other': 1, 'clearAlarm': 2, 'setAlarm': 3.
cpqCmcSetAlarm2	1.3.6.1.4.1.232.153.2.2.5.8	integer	read-write	Is used to set an alarm in the CMC from the management-station. With this command the management-station can i.e. switch on an alarm-relay or the AudibleAlarm of the CMC. Can be used for alert-handling Enumeration: 'other': 1, 'clearAlarm': 2, 'setAlarm': 3.
cpqCmcSetFan1	1.3.6.1.4.1.232.153.2.2.5.9	integer	read-write	Is used for run and stop control of fan1. (2) fan will run and stop according to temperature of sensor 1 and threshold of fan1 (3) fan will run independent of temperature and threshold (4) fan will stop independent of temperature and threshold (3) and (4) can be used for alert handling. Enumeration: 'auto': 2, 'other': 1, 'off': 4, 'on': 3.
cpqCmcSetFan2	1.3.6.1.4.1.232.153.2.2.5.10	integer	read-write	Is used for run and stop control of fan2. (2) fan will run and stop according to temperature of sensor 2 and threshold of fan2 (3) fan will run independent of temperature and threshold (4) fan will stop independent of temperature and threshold (3) and (4) can be used for alert handling Enumeration: 'auto': 2, 'other': 1, 'off': 4, 'on': 3.
cpqCmcSetQuitRelay1	1.3.6.1.4.1.232.153.2.2.5.11	integer	read-write	Status and quit of alarm relay 1. (2) relay is switched because of an alarm (3) relay is not switched, no alarm (4) (set) will quit relay 1 in case of alarm Enumeration: 'notSwitched': 3, 'quit': 4, 'other': 1, 'switched': 2.
cpqCmcSetQuitRelay2	1.3.6.1.4.1.232.153.2.2.5.12	integer	read-write	Status and quit of alarm relay 2. (2) relay is switched because of an alarm (3) relay is not switched, no alarm (4) (set) will quit relay 2 in case of alarm Enumeration: 'notSwitched': 3, 'quit': 4, 'other': 1, 'switched': 2.
cpqCmcLog	1.3.6.1.4.1.232.153.2.2.6
cpqCmcLogsNumber	1.3.6.1.4.1.232.153.2.2.6.1	integer	read-only	Number of Log-entries
cpqCmcLogTable	1.3.6.1.4.1.232.153.2.2.6.2		no-access	Log-table
cpqCmcLogEntry	1.3.6.1.4.1.232.153.2.2.6.2.1		no-access	Log-table entries
cpqCmcLogIndex	1.3.6.1.4.1.232.153.2.2.6.2.1.1	integer	read-only	Index for the Log-table. Its value ranges between 1 and the value of cpqCmcLogsNumber
cpqCmcLogDate	1.3.6.1.4.1.232.153.2.2.6.2.1.2	displaystring	read-only	Date of log information.
cpqCmcLogTime	1.3.6.1.4.1.232.153.2.2.6.2.1.3	displaystring	read-only	Time of log information.
cpqCmcLogText	1.3.6.1.4.1.232.153.2.2.6.2.1.4	displaystring	read-only	Log information.
cpqCmcLogClass	1.3.6.1.4.1.232.153.2.2.6.2.1.5	displaystring	read-only	Status of log information.
cpqCmcalarmTemp1	1.3.6.1.4.1.232.1530.153001			The temperature at rack sensor 1 is outside the specified threshold. Action: Check the air handling system for the rack and refer to Trap Details for more information.
cpqCmcalarmTemp2	1.3.6.1.4.1.232.1530.153002			The temperature at rack sensor 2 is outside the specified threshold. Action: Check the air handling system for the rack and refer to Trap Details for more information.
cpqCmcalarmFan1	1.3.6.1.4.1.232.1530.153003			The status of Fan 1 has changed. Action: Refer to Trap Details for more information.
cpqCmcalarmFan2	1.3.6.1.4.1.232.1530.153004			The status of Fan 2 has changed. Action: Refer to Trap Details for more information.
cpqCmcalarmVoltage	1.3.6.1.4.1.232.1530.153005			The AC voltage of the rack is outside the specified threshold. Action: Check the incoming power source and ensure all cables are inserted correctly.
cpqCmcalarmHumidity	1.3.6.1.4.1.232.1530.153006			The humidity of the rack is outside the specified threshold. Action: Check the air handling system for the rack and refer to Trap Details for more information.
cpqCmcalarmInput1	1.3.6.1.4.1.232.1530.153007			The door or sidepanel of the rack has been opened (access point #1). Action: Check for unauthorized intrusion and refer to Trap Details for more information.
cpqCmcalarmInput2	1.3.6.1.4.1.232.1530.153008			The door or sidepanel of the rack has been opened (access point #2). Action: Check for unauthorized intrusion and refer to Trap Details for more information.
cpqCmcalarmInput3	1.3.6.1.4.1.232.1530.153009			The door or sidepanel of the rack has been opened (access point #3). Action: Check for unauthorized intrusion and refer to Trap Details for more information.
cpqCmcalarmInput4	1.3.6.1.4.1.232.1530.153010			The door or sidepanel of the rack has been opened (access point #4). Action: Check for unauthorized intrusion and refer to Trap Details for more information.
cpqCmcalarmLock1	1.3.6.1.4.1.232.1530.153011			Rack door lock #1 alarm. Action: Ensure the door is completely closed and check for unauthorized intrusion and refer to Trap Details for more information.
cpqCmcalarmLock2	1.3.6.1.4.1.232.1530.153012			Rack door lock #2 alarm. Action: Ensure the door is completely closed and check for unauthorized intrusion and refer to Trap Details for more information.
cpqCmcalarmSmoke	1.3.6.1.4.1.232.1530.153013			The rack smoke detector has detected smoke. Action: Investigate rack for an over temperature condition and refer to Trap Details for more information.
cpqCmcalarmShock	1.3.6.1.4.1.232.1530.153014			The rack shock detector has detected a vibration to the rack. Action: Investigate rack.
cpqCmcalarmAux1	1.3.6.1.4.1.232.1530.153015			The rack auxiliary alarm input #1 has been triggered.
cpqCmcalarmAux2	1.3.6.1.4.1.232.1530.153016			The rack auxiliary alarm input #2 has been triggered.
cpqCmcalarm1	1.3.6.1.4.1.232.1530.153017			Alarm 1, set from Network management
cpqCmcalarm2	1.3.6.1.4.1.232.1530.153018			Alarm 2, set from Network management
cpqCmcalarmLock1Dev	1.3.6.1.4.1.232.1530.153019			The rack door locking device #1 has failed. Action: Check the device lock cable or failed battery and refer to Trap Details for more information.
cpqCmcalarmLock2Dev	1.3.6.1.4.1.232.1530.153020			The rack door locking device #2 has failed. Action: Check the device lock cable or failed battery and refer to Trap Details for more information.
cpqCmcSetupChanged	1.3.6.1.4.1.232.1530.153100			Setup of CMC has changed.