CPE-DSL-MIB: View SNMP OID List / Download MIB

VENDOR: DSL TERMINAL REMOTE MANAGEMENT ALLIANCE


 Home MIB: CPE-DSL-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, ATM-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 cpeDSL 1.3.6.1.4.1.16972
xDSL CPE MIB.
             cpeSysInfo 1.3.6.1.4.1.16972.1
                 cpeSysInfoUptime 1.3.6.1.4.1.16972.1.1 integer32 read-only
It is the working time since CPE rebooted.
                 cpeSysInfoConfigId 1.3.6.1.4.1.16972.1.2 displaystring read-write
for synchronizing configuration by network manager
                 cpeSysInfoFirmwareVersion 1.3.6.1.4.1.16972.1.3 displaystring read-only
Chipset version information.
                 cpeSysInfoProductId 1.3.6.1.4.1.16972.1.4 displaystring read-only
CPE product module,For example, the 'MT800' is the product id.
                 cpeSysInfoVendorId 1.3.6.1.4.1.16972.1.5 displaystring read-only
the name of CPE vendor.
                 cpeSysInfoSystemVersion 1.3.6.1.4.1.16972.1.6 displaystring read-only
CPE system version
                 cpeSysInfoWorkMode 1.3.6.1.4.1.16972.1.7 integer read-only
CPE s work mode. Enumeration: 'bridge': 1, 'router': 2.
                 cpeSysInfoMibVersion 1.3.6.1.4.1.16972.1.8 octet string read-only
The MIB's version,now the vaersion is V1.00
                 cpeSysInfoSerialNumber 1.3.6.1.4.1.16972.1.9 octet string read-only
The CPE's BAR CODE including serial number to identify itself to each other it is embedded by equipment provider while manufacturing .
                 cpeSysInfoManufacturerOui 1.3.6.1.4.1.16972.1.10 octet string read-only
the OUI (Organizationally Unique Identifier) of IEEE standard organization provided. For example, this huawei CPE ADSL is 00E0FC
             cpeConfig 1.3.6.1.4.1.16972.2
                 cpeSystem 1.3.6.1.4.1.16972.2.1
                     cpeSystemReboot 1.3.6.1.4.1.16972.2.1.1 integer read-write
Rebooting CPE s operation Enumeration: 'reboot': 1.
                     cpeSystemSave 1.3.6.1.4.1.16972.2.1.2 integer read-write
saving the CPE s configuration to NVRAM Enumeration: 'save': 1.
                     cpeSystemRestore 1.3.6.1.4.1.16972.2.1.3 integer read-write
Restore CPE s configuration restoreToNull(1), clear all of the configuration restoreToDefault(2)restore to default configuration Enumeration: 'restoreToDefault': 2, 'restoreToNull': 1.
                     cpeSystemTrapEnable 1.3.6.1.4.1.16972.2.1.4 enableadmin read-write
trap notification switch, if set to Disable CPE will not send trap notification untill it is set to enable
                     cpeBootTrapResponse 1.3.6.1.4.1.16972.2.1.5 integer read-write
It is the boottrap response identity Every time,when CPE is rebooted, it is set to 'noResponse' Enumeration: 'responseReCfg': 3, 'noResponse': 1, 'responseCfgReady': 2.
                     cpeReservedString 1.3.6.1.4.1.16972.2.1.6 octet string read-write
It is the reserved string
                 cpeConfigAdslLine 1.3.6.1.4.1.16972.2.2
                     cpeConfigAdslLineTrellis 1.3.6.1.4.1.16972.2.2.1 enableadmin read-write
trellis encoding configuration.
                     cpeConfigAdslLineHandshake 1.3.6.1.4.1.16972.2.2.2 integer read-write
link handshake negotiation mode configuration Enumeration: 'autosenseT1413First': 2, 'gdmt': 5, 't1413': 4, 'autosenseGdmtFirst': 1, 'glite': 6, 'autosense': 7, 'gdmtOrLite': 3.
                     cpeConfigAdslLineBitSwapping 1.3.6.1.4.1.16972.2.2.3 enableadmin read-write
BITSWAP encoding configuration
                 cpePvcTable 1.3.6.1.4.1.16972.2.3 no-access
PVC VCL configuration table It is RFC2515 ATM-MIB atmVclTable s extended table
                     cpePvcEntry 1.3.6.1.4.1.16972.2.3.1 no-access
PVC VCL configuration entry
                         cpePvcId 1.3.6.1.4.1.16972.2.3.1.1 integer32 read-only
PVC numberIt is used for identify PVC in CPE
                         cpePvcIfIndex 1.3.6.1.4.1.16972.2.3.1.3 pvcifindexrange read-only
this parameter is used for bonding upper layer service s index
                         cpePvcUpperEncapsulation 1.3.6.1.4.1.16972.2.3.1.4 integer read-only
PVC service encapsulation type Enumeration: 'router2684': 3, 'pureBridge2684': 4, 'bridge2684PlusIp': 5, 'ilmi': 7, 'pppoA': 1, 'pppoE': 2.
                         cpePvcAdminStatus 1.3.6.1.4.1.16972.2.3.1.5 integer read-only
PVC active and deactive operation, We suggest to use the atmVclAdminStatus in the vclTableof ATM-MIB instead ofcpePvcAdminStatus Enumeration: 'down': 2, 'up': 1.
                         cpePvcOperStatus 1.3.6.1.4.1.16972.2.3.1.6 integer read-only
PVC active and deactive status. We suggest to use the atmVclOperStatus in the vclTableof ATM-MIB instead of cpePvcOperStatus Enumeration: 'down': 2, 'up': 1.
                         cpePvcBridgeMode 1.3.6.1.4.1.16972.2.3.1.7 enableadmin read-only
bridge mode configuration only when cpePvcUpperEncapsulation is set to 'bridge2684' this configuration is available
                         cpePvcMacLearnMode 1.3.6.1.4.1.16972.2.3.1.8 enableadmin read-only
MAC address learn mode configuration, it's no use.
                         cpePvcIgmpMode 1.3.6.1.4.1.16972.2.3.1.9 enableadmin read-only
if IGMP traffic and internet traffic service is beared by different PVC It can be configured by this parameter
                         cpePvcDhcpClientMode 1.3.6.1.4.1.16972.2.3.1.10 enableadmin read-only
DHCP client mode configuration
                         cpePvcNatMode 1.3.6.1.4.1.16972.2.3.1.11 enableadmin read-only
NAT mode configuration
                 cpePppTable 1.3.6.1.4.1.16972.2.4 no-access
PPP configuration table,it is pppSecuritySecretsTable s extended table pppSecuritySecretsLink is set to 0 cpePppIfIndex pppSecuritySecretsIdIndex
                     cpePppEntry 1.3.6.1.4.1.16972.2.4.1 no-access
PPP configuration entry
                         cpePppIfIndex 1.3.6.1.4.1.16972.2.4.1.1 pppifindexrange read-only
ppps index
                         cpePppPvcIfIndex 1.3.6.1.4.1.16972.2.4.1.2 pvcifindexrange read-only
the lower layer logic interface index for ppp,also the ATM layer logic interface index for ppp,the value is the same as cpePvcIfindex
                         cpePppServiceName 1.3.6.1.4.1.16972.2.4.1.3 displaystring read-only
PPP service name
                         cpePppDisconnectTimeout 1.3.6.1.4.1.16972.2.4.1.4 integer read-only
PPP idle disconnect timeout parameter, if it is set to zero, the PPP connection will not Be disconnected. If it not set to zero, the PPP will be disconnected if there is no traffic on the PPP for the specified period.
                         cpePppMSS 1.3.6.1.4.1.16972.2.4.1.5 integer read-only
PPPs max segment size
                         cpePppRowStatus 1.3.6.1.4.1.16972.2.4.1.6 rowstatus read-only
PPP tables row status
                         cpePppAdminStatus 1.3.6.1.4.1.16972.2.4.1.7 integer read-only
Ppp link operation up(1), activate operation down(2), deactivate operation test(3), PPP test,test operating should generated an trap after it is done. cannel(4),stop the PPP testing Enumeration: 'down': 2, 'test': 3, 'up': 1, 'cancel': 4.
                         cpePppOperStatus 1.3.6.1.4.1.16972.2.4.1.8 integer read-only
ppp link status up(1): active status down(2):deactive status Enumeration: 'down': 2, 'up': 1.
                         cpePppTestResult 1.3.6.1.4.1.16972.2.4.1.9 integer read-only
ppp test result success(1), testing(2) authFail(3), failure(4) Enumeration: 'failure': 4, 'authFail': 3, 'testing': 2, 'success': 1.
                 cpeIpTable 1.3.6.1.4.1.16972.2.5 no-access
IP address table
                     cpeIpEntry 1.3.6.1.4.1.16972.2.5.1 no-access
Interfaces IP address entry
                         cpeIpIndex 1.3.6.1.4.1.16972.2.5.1.1 unsigned32 read-only
IP address table s index
                         cpeIpLowerIfIndex 1.3.6.1.4.1.16972.2.5.1.2 integer32 read-only
lower layer s logic index
                         cpeIpAddress 1.3.6.1.4.1.16972.2.5.1.3 ipaddress read-only
IP address
                         cpeIpNetmask 1.3.6.1.4.1.16972.2.5.1.4 ipaddress read-only
IP address netmask
                         cpeIpGateway 1.3.6.1.4.1.16972.2.5.1.5 ipaddress read-only
the gateway address, NMS could config it only when the IP is gained by static mode, otherwise ,it can be read-ony mode.
                         cpeIpRowStatus 1.3.6.1.4.1.16972.2.5.1.6 rowstatus read-only
the row status of IP address table
                 cpeLanDhcp 1.3.6.1.4.1.16972.2.6
                     cpeLanDhcpAdminStatus 1.3.6.1.4.1.16972.2.6.1 integer read-write
dhcp mode configuration noSupport(1), no support dhcp dhcpServer(2),support dhcp server Enumeration: 'dhcpServer': 2, 'noSupport': 1.
                 cpeWanDns 1.3.6.1.4.1.16972.2.7
                     cpeDnsPrimaryAddress 1.3.6.1.4.1.16972.2.7.1 ipaddress read-write
the primary DNS IP address
                     cpeDnsSecondAddress 1.3.6.1.4.1.16972.2.7.2 ipaddress read-write
the secondary DNS IP address
             cpeSysLog 1.3.6.1.4.1.16972.3
                 cpeSysLogBeginTime 1.3.6.1.4.1.16972.3.1 dateandtime read-write
syslog requery s begin time
                 cpeSysLogEndTime 1.3.6.1.4.1.16972.3.2 dateandtime read-write
syslog requery s end time
                 cpeSysLogAdminStatus 1.3.6.1.4.1.16972.3.3 integer read-write
requery syslog operation start(1), start requery syslog clear(2), clear CPE s syslog record Enumeration: 'start': 1, 'clear': 2.
                 cpeSysLogTable 1.3.6.1.4.1.16972.3.4 no-access
syslog record s table
                     cpeSysLogEntry 1.3.6.1.4.1.16972.3.4.1 no-access
syslog record s entry
                         cpeSysLogIndex 1.3.6.1.4.1.16972.3.4.1.1 unsigned32 read-only
the syslog record s index
                         cpeSysLogContent 1.3.6.1.4.1.16972.3.4.1.2 displaystring read-only
the syslog s detail description
             cpeFtp 1.3.6.1.4.1.16972.4
                 cpeFtpIP 1.3.6.1.4.1.16972.4.1 ipaddress read-write
the FTP Server s IP address
                 cpeFtpUser 1.3.6.1.4.1.16972.4.2 displaystring read-write
the user name for FTP
                 cpeFtpPasswd 1.3.6.1.4.1.16972.4.3 displaystring read-write
the access password for FTP
                 cpeFtpFileName 1.3.6.1.4.1.16972.4.4 displaystring read-write
the file name for ftp download which is saved in FTP server.
                 cpeFtpAdminStatus 1.3.6.1.4.1.16972.4.5 integer read-write
FTP administration operation Enumeration: 'upgrade': 2, 'stop': 1, 'ftpTest': 3.
                 cpeFtpOperStatus 1.3.6.1.4.1.16972.4.6 integer read-only
FTP administration status Enumeration: 'downloading': 4, 'saving': 7, 'connectSuccess': 2, 'normal': 1, 'downloadFailure': 6, 'connectFailure': 3, 'upgradeSuccess': 9, 'saveFailure': 8, 'upgradeFailure': 10, 'downloadSuccess': 5.
                 cpeFtpTotalSize 1.3.6.1.4.1.16972.4.8 integer32 read-only
the file s total size for downloadunit is Kbyte
                 cpeFtpDoneSize 1.3.6.1.4.1.16972.4.9 integer32 read-only
the file s size which is already download unit is Kbyte
                 cpeFtpElapseTime 1.3.6.1.4.1.16972.4.10 integer32 read-only
the elapse time for FTP download
             cpeDiagnose 1.3.6.1.4.1.16972.5
                 cpePing 1.3.6.1.4.1.16972.5.1
                     cpePingAddr 1.3.6.1.4.1.16972.5.1.1 displaystring read-write
the destination IP address for ping testeither IP or Domain name
                     cpePingPkgSize 1.3.6.1.4.1.16972.5.1.2 integer read-write
the packet size for ping test
                     cpePingCount 1.3.6.1.4.1.16972.5.1.3 integer read-write
the count of sending packets for ping test
                     cpePingAdminStatus 1.3.6.1.4.1.16972.5.1.4 integer read-write
ping test operation stop(1), start ping test start(2) stop ping test Enumeration: 'start': 2, 'stop': 1.
                     cpePingOperStatus 1.3.6.1.4.1.16972.5.1.5 integer read-only
ping test operation status Enumeration: 'failure': 4, 'normal': 1, 'success': 3, 'pinging': 2.
                     cpePingResult 1.3.6.1.4.1.16972.5.1.6 displaystring read-only
ping test result IP 10.1.1.100 Sent = xx Received = xx Lost = xx Min = xx ms Max = xx ms Average = xx ms
             cpeTrap 1.3.6.1.4.1.16972.6
                 cpeTraps 1.3.6.1.4.1.16972.6.0
                     cpeBootTrap 1.3.6.1.4.1.16972.6.0.1
trap notification when CPE is rebooted. CPE is needed to send all parameters in one trap packet.
                     cpeFtpDone 1.3.6.1.4.1.16972.6.0.2
trap notification when ftp download is finished
                     cpePingDone 1.3.6.1.4.1.16972.6.0.3
trap notification when PING test is finished
                     cpePppTestDone 1.3.6.1.4.1.16972.6.0.4
trap notification when PPP test is finished