COM21-HCXTX-MIB: View SNMP OID List / Download MIB

VENDOR: COM21


 Home MIB: COM21-HCXTX-MIB
Download as:   
SNMPv2-CONF, COM21-HCX-MIB, COM21-HCXALM-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 com21HcxTx 1.3.6.1.4.1.1141.2.20
This is the Com21 ComController TX Unit Control MIB module. COM21 Part# 005-0025-00
 com21HcxDnstrmPortGroup 1.3.6.1.4.1.1141.2.21
       hcxDownstreamPortId 1.3.6.1.4.1.1141.2.21.1 integer32 read-only
contains downstream port id. Initially at least, only 1 supported.
       hcxXmitFrequency 1.3.6.1.4.1.1141.2.21.2 integer read-write
Contains the transmit frequency of the RF port in KHz. If this value is changed AFTER the acquisition of ComPorts then a corresponding change to the stuXmitFrequency attribute shall be broadcast to all the acquired ComPorts. Minimum step size is 200. i.e. 200000hz. Default is 0.
       hcxXmitGain 1.3.6.1.4.1.1141.2.21.3 integer read-write
Transmit gain is used to specify the power level in the ComController transmitter. Default is 0.
 com21HcxDnstrmStatsGroup 1.3.6.1.4.1.1141.2.22
       hcxStatsCurrMinTxCells 1.3.6.1.4.1.1141.2.22.1 gauge32 read-only
Represents the number of cells transmitted in the current 15 minute period.
       hcxStatsCurrMinTxNullCells 1.3.6.1.4.1.1141.2.22.2 gauge32 read-only
Represents the number of null cells transmitted in the current 15 minute period.
       hcxStatsPrevMinTxCells 1.3.6.1.4.1.1141.2.22.3 gauge32 read-only
Represents the number of cells transmitted in the previous 15 minute period.
       hcxStatsPrevMinTxNullCells 1.3.6.1.4.1.1141.2.22.4 gauge32 read-only
Represents the number of null cells transmitted in the previous 15 minute period.
       hcxDownstreamUtil 1.3.6.1.4.1.1141.2.22.5 gauge32 read-only
Represents the percentage of utilization on the downstream channel - the RF TX will stuff with null cells to match line rate. i.e. traffic cells/(traffic cells + null cells) * 100. This figure is updated every second.
       hcxStatsClearTxCurrStats 1.3.6.1.4.1.1141.2.22.6 integer read-write
This attribute is used to clear current TX statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr. Enumeration: 'clear': 2, 'nil': 1.
 com21HcxDnstrmUnitGroup 1.3.6.1.4.1.1141.2.23
       hcxDownstreamShelfId 1.3.6.1.4.1.1141.2.23.1 integer read-only
contains the associated shelf id.
       hcxDownstreamSlotId 1.3.6.1.4.1.1141.2.23.2 integer32 read-only
contains downstream slot id.
       hcxDownstreamHardwareVersion 1.3.6.1.4.1.1141.2.23.3 displaystring read-only
contains the hardware version of the TX card. An empty string if card not present.
       hcxDownstreamBootVersion 1.3.6.1.4.1.1141.2.23.4 displaystring read-only
contains the version of the TX card boot ROM. An empty string if card not present.
       hcxDnstreamUnitPrimServState 1.3.6.1.4.1.1141.2.23.5 primservicestate read-only
contains primary service state of the Downstream Unit.
       hcxDnstreamUnitSecServState 1.3.6.1.4.1.1141.2.23.6 displaystring read-only
contains a string defining the secondary service states of the Downstream Unit. The substrings supported by the Downstream Unit shall be: TEST - in test, as set by hcxDnUnitConfigState, STBY - standby, again set by hcxDnUnitConfigState, MT - maintenance, set by hcxDnUnitConfigState, FAULT - hardware failure, UNEQ - unequipped.
       hcxDnUnitConfigState 1.3.6.1.4.1.1141.2.23.7 integer read-write
The Downstream Unit State is an active-value. Note that because we have only one port per card then this state change is exactly the same as hcxDnstrmPortState. Note that initially standby will be the same state as offline. Later this will change when TX redundancy is supported. offline is default. Enumeration: 'test': 2002, 'standby': 2003, 'offline': 2000, 'online': 2001.
       hcxDnUnitRestartAction 1.3.6.1.4.1.1141.2.23.8 integer read-write
The TX Unit Action is an active-value. The setting of this attibute to restart(2) causes the TX card to reset and download a new image. Enumeration: 'restart': 2, 'nil': 1.
       hcxDnDiagTestAction 1.3.6.1.4.1.1141.2.23.9 integer read-write
This attribute is used to invoke the internal TX diagnostic test. In order to activate this test, the card must be placed in the test state. Enumeration: 'execute': 2, 'nil': 1.
       hcxDnDiagTestResult 1.3.6.1.4.1.1141.2.23.10 integer read-only
This attribute contains the result of the last TX diagnostic test. Details TBD. Enumeration: 'invalidState': 4, 'failure': 3, 'inprogress': 1, 'success': 2.
       hcxDnTestStatusLed 1.3.6.1.4.1.1141.2.23.11 integer read-only
The TX Test Status LED is a read-only attribute which describes the condition of the TX Test Status light emitting diode located on the RX board. A value of on(1) indicates that a service effecting test is in progress and that the LED is illuminated. off if card not present. Enumeration: 'on': 1, 'off': 2.
       hcxDnFaultStatusLed 1.3.6.1.4.1.1141.2.23.12 integer read-only
The RX Fault Status LED is a read-only attribute which describes the condition of the TX Fault Status light emitting diode located on the TX board. A value of on(1) indicates that an fault condition has been detected (for which a trap will have been issued) and the LED is illuminated. off if card not present. Enumeration: 'on': 1, 'off': 2.
       hcxDownstreamSerialNumber 1.3.6.1.4.1.1141.2.23.13 displaystring read-only
contains the serial number of the TX card. An empty string if card not present.
 hcxDnstrmUnitPrimStateChange 1.3.6.1.4.1.1141.4.60
Generated whenever a the hcxDnstreamUnitPrimServState changes in value. This an event with no clear condition. Only severity is WARNING.
 hcxDnstrmUnitSecStateChange 1.3.6.1.4.1.1141.4.61
Generated whenever a the hcxDnstreamUnitSecServState changes in value. This an event with no clear condition. Only severity is WARNING.
 hcxDnDiagTestComplete 1.3.6.1.4.1.1141.4.62
This notification is generated whenever the TX internal diagnostic tests are completed. This an event with no clear condition. Only severity is WARNING.
 hcxDnTestStatusLedChange 1.3.6.1.4.1.1141.4.63
generated whenever there is a change in test LED status. This an event with no clear condition. Only severity is WARNING.
 hcxDnFaultStatusLedChange 1.3.6.1.4.1.1141.4.64
generated whenever there is a change in the Fault LED status. This an event with no clear condition. Only severity is WARNING.
 hcxDnOperationFailure 1.3.6.1.4.1.1141.4.65
This notification is generated by the CC whenever a TX card fails to respond correctly to a request. This failure could indicate either a resource problem or software failure. Note that if a TX card failures to respond completely to a CC request, then a hcxInsertChange trap shall be generated. This is an event with no clear condition. Only severity is WARNING.
 hcxSynthLockLossDetected 1.3.6.1.4.1.1141.4.68
Default severity is MINOR.
 hcxSynthLockLossClear 1.3.6.1.4.1.1141.4.69
Severity is CLEARED.
 hcxLossOfFrameClkDetected 1.3.6.1.4.1.1141.4.70
Default severity is MINOR.
 hcxLossOfFrameClkClear 1.3.6.1.4.1.1141.4.71
Severity is CLEARED.