COM21-HCXSTUPRXY-MIB: View SNMP OID List / Download MIB

VENDOR: COM21


 Home MIB: COM21-HCXSTUPRXY-MIB
Download as:   
SNMPv2-CONF, COM21-HCX-MIB, COM21-HCXALM-MIB, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 com21StuPrxy 1.3.6.1.4.1.1141.3.1
This is the Com21 ComController ComPort Proxy MIB. COM21 Part# 005-0025-00
 com21StuControlGroup 1.3.6.1.4.1.1141.3.2
     com21StuControlTable 1.3.6.1.4.1.1141.3.2.1 no-access
.
         com21StuControlEntry 1.3.6.1.4.1.1141.3.2.1.1 no-access
.
             stuCtrlMacAddress 1.3.6.1.4.1.1141.3.2.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device.
             stuUserText 1.3.6.1.4.1.1141.3.2.1.1.2 displaystring read-write
The ComPort User Text is a non-volatile string which is set by the management system with an arbitrary value. This value does not have to be unique. It's purpose is solely to assist the carrier personnel with identifying the ComPort device.
             stuSerialNumber 1.3.6.1.4.1.1141.3.2.1.1.3 displaystring read-only
The Serial Number is a 10 character serial number used by COM21 to uniquely identify the device.
             stuBoardRevision 1.3.6.1.4.1.1141.3.2.1.1.4 displaystring read-only
This string defines the hardware revision of the ComPort board.
             stuUnitRevision 1.3.6.1.4.1.1141.3.2.1.1.5 displaystring read-only
This string defines the hardware revision of the complete ComPort unit.
             stuTunerRevision 1.3.6.1.4.1.1141.3.2.1.1.6 displaystring read-only
This string defines the hardware revision of the RF Tuner.
             stuModelName 1.3.6.1.4.1.1141.3.2.1.1.7 displaystring read-only
This string defines the ComPort Model Type.
             stuUnitManufacturer 1.3.6.1.4.1.1141.3.2.1.1.8 displaystring read-only
This string defines the manufacturer of the ComPort. Initially COM21 and 3COM.
             stuDesKeySize 1.3.6.1.4.1.1141.3.2.1.1.9 integer read-only
DES encryption key size supported by the ComPort. Enumeration: 'bit56key': 1, 'bit40key': 2.
             stuMibRevision 1.3.6.1.4.1.1141.3.2.1.1.10 displaystring read-only
Indicates the Mib Revision as display string of max. 8 bytes. That includes string terminator.
             stuEpochTime 1.3.6.1.4.1.1141.3.2.1.1.11 epochtime read-write
ComPort time in seconds since 1970.
             stuRestartAction 1.3.6.1.4.1.1141.3.2.1.1.12 integer read-write
The Restart Action is an active-value. The setting of this value is idempotent. The setting of this value to restart causes the STU to restart utilizing the present software load. Enumeration: 'restart': 2, 'nil': 1.
             stuPrevTestResult 1.3.6.1.4.1.1141.3.2.1.1.13 integer read-only
Result of previous test. Presently this will be warm or cold restart. Enumeration: 'failure': 2, 'success': 1.
             stuPrevTestFailCode 1.3.6.1.4.1.1141.3.2.1.1.14 integer read-only
Failure result code. Only set if stuPrevTestResult is equal to failure.
             stuOperationState 1.3.6.1.4.1.1141.3.2.1.1.15 integer read-only
The ComPort Operational State is controlled either by the stuAdminState or locally detected conditions. Note that downloading and failedRanging are ComController helded states. Enumeration: 'upstreamTest': 4, 'etherLoopback': 5, 'deauthorized': 2, 'operational': 1, 'downloading': 6, 'offline': 3, 'failedRanging': 7.
             stuAimModuleId 1.3.6.1.4.1.1141.3.2.1.1.16 integer read-only
identifies the connected AIM module type. The maceEthernet entry indicates NO AIM inserted. Enumeration: 'none': 1, 'debugModule': 2, 'atm': 7, 'telephony2': 5, 'telephony1': 4, 'teleReturn': 3, 'wirelessEthernet': 6.
             stuUpstrmTestFreq 1.3.6.1.4.1.1141.3.2.1.1.17 upstrmfreqkhz read-write
Transmit Frequency used by ComPort for Upstream RF test. The default shall be 0 (an invalid freq).
             stuInbPresent 1.3.6.1.4.1.1141.3.2.1.1.19 integer read-only
Indicates if the INB is present on the ComPORT. This is a future item not supported by present ComPORT hardware. Enumeration: 'inbInstalled': 1, 'inbReady': 3, 'noInbSupport': 2.
             stuInbContToneEnable 1.3.6.1.4.1.1141.3.2.1.1.20 integer read-write
Controls the activation of a continuous pilot tone. This does not effect the standard tone sent before data (which is controlled by a hardware switch). This value is not stored in NVRAM. Default is disable. Enumeration: 'enable': 2, 'disable': 1.
             stuLastRestartCause 1.3.6.1.4.1.1141.3.2.1.1.21 integer read-only
specifies the reason for the last ComPort reset. Enumeration: 'lof': 5, 'unknown': 1, 'pingFail': 3, 'hcxDirected': 2, 'fault': 6, 'imageRefresh': 4.
             stuUpstrmPingCntrl 1.3.6.1.4.1.1141.3.2.1.1.22 integer read-write
used to control the upstream ping. Default is enable. Enumeration: 'enable': 2, 'disable': 1.
             stuUpstrmTestTimeout 1.3.6.1.4.1.1141.3.2.1.1.23 integer read-write
timeout used by ComPort for Upstream RF test. If the ComController does not terminate the test in this period - defined in seconds - then the ComPort will automatically reset, thus terminating the test. 0 means no timeout. Default is 0.
             stuDnstrmAltFreq 1.3.6.1.4.1.1141.3.2.1.1.24 frequencykhz read-write
Defines an alternate downstream frequency for the ComPort. This value is non-voltile. Default is 0 (an invalid freq). IMPORTANT - this is a tbd feature not available in 2.3 release.
             stuAsicRevision 1.3.6.1.4.1.1141.3.2.1.1.25 integer read-only
defines the revision of the ASIC. Presently values 1-255 are supported.
             stuVoiceAimLpBk 1.3.6.1.4.1.1141.3.2.1.1.26 integer read-write
If a voiceAim Module is configured on the stu, setting the Aim Module to stuLpBk will configure the Aim Module to loopback from one voice port to the other. default: nil Enumeration: 'stuLpBk': 2, 'nil': 1.
             stuVoiceAimPort1Status 1.3.6.1.4.1.1141.3.2.1.1.27 integer read-only
Describes whether the AimPort is onhook or offhook. default: nil Enumeration: 'offHook': 2, 'onHook': 1.
             stuVoiceAimPort2Status 1.3.6.1.4.1.1141.3.2.1.1.28 integer read-only
Describes whether the AimPort is onhook or offhook. default: nil Enumeration: 'offHook': 2, 'onHook': 1.
 com21StuPhysicalGroup 1.3.6.1.4.1.1141.3.3
     com21StuPhysicalTable 1.3.6.1.4.1.1141.3.3.1 no-access
.
         com21StuPhysicalEntry 1.3.6.1.4.1.1141.3.3.1.1 no-access
.
             stuPhyMacAddress 1.3.6.1.4.1.1141.3.3.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device.
             stuXmitFrequency 1.3.6.1.4.1.1141.3.3.1.1.2 upstrmfreqkhz read-write
Contains the transmit frequency of the ComPort RF board in KHz. A change in this value shall result in the ComPort being hopped to a differing RX card. The Common Controller shall ensure the sanity of a change to this attribute and shall perform the necessary interface to the RX cards. The actual set of this attribute on the ComPort shall be performed by a GO_SET message.
             stuRecvFrequency 1.3.6.1.4.1.1141.3.3.1.1.3 frequencykhz read-write
Contains the receive frequency in KHz. This attribute will match the downstream frequency of the ComController. The ONLY time when this should be change is when the NMAPS wishes hop the ComPort to a different ComController.
             stuRecvRfSrEstimate 1.3.6.1.4.1.1141.3.3.1.1.4 integer32 read-only
Received Signal S/R estimate in dB on Rf Downstream. This value is an approximation in dB. Received value should be divided by 10 to get a fixed point representation. e.g., value 185 means 18.5 dB.
             stuRecvRfSigLevel 1.3.6.1.4.1.1141.3.3.1.1.5 integer32 read-only
Received Signal Level in dBmv on Rf Downstream.
             stuXmitOffset 1.3.6.1.4.1.1141.3.3.1.1.6 offset read-only
Specifies the transmit offset of the ComPort.
             stuXmitDacVRef 1.3.6.1.4.1.1141.3.3.1.1.7 integer read-only
Specifies the upstream RF DAC Voltage Reference. This value is set only via a GO_SET message under the control of the RX card.
             stuRecvFreqDrift 1.3.6.1.4.1.1141.3.3.1.1.8 integer read-only
Frequency shift (+/- 250Khz) from Downstream Frequency.
 com21StuAlarmGroup 1.3.6.1.4.1.1141.3.4
     com21StuAlarmTable 1.3.6.1.4.1.1141.3.4.1 no-access
.
         com21StuAlarmEntry 1.3.6.1.4.1.1141.3.4.1.1 no-access
.
             stuAlmMacAddress 1.3.6.1.4.1.1141.3.4.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device.
             stuAlmTime 1.3.6.1.4.1.1141.3.4.1.1.2 epochtime read-only
Specifies the time the alarm condition was detected.
             stuAlmTrapId 1.3.6.1.4.1.1141.3.4.1.1.3 integer read-only
Specifies the trap number.
             stuAlmSeverity 1.3.6.1.4.1.1141.3.4.1.1.4 alarmseverity read-only
Specifies the alarm severity.
 com21StuEtherConfigGroup 1.3.6.1.4.1.1141.3.5
     com21StuEtherConfigTable 1.3.6.1.4.1.1141.3.5.1 no-access
.
         com21StuEtherConfigEntry 1.3.6.1.4.1.1141.3.5.1.1 no-access
.
             stuEthMacAddress 1.3.6.1.4.1.1141.3.5.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
             stuEtherFiltFlushAction 1.3.6.1.4.1.1141.3.5.1.1.2 integer read-write
Controls the flush operations. Enumeration: 'none': 1, 'flushMac': 2, 'flushEtherType': 3, 'flushIp': 4.
             stuEtherForwArpOnly 1.3.6.1.4.1.1141.3.5.1.1.3 integer read-write
If enable state then only ARP broadcast packets are forwarded upstream. Default is disable. Enumeration: 'enable': 2, 'disable': 1.
             stuEtherMacFiltAge 1.3.6.1.4.1.1141.3.5.1.1.4 integer read-write
Specifies the number of seconds that a learned MAC Address entry survives since last learning.
             stuEtherBCastRateEn 1.3.6.1.4.1.1141.3.5.1.1.5 integer read-write
Enable rate control. Default is disabled. Enumeration: 'enable': 2, 'disable': 1.
             stuEtherBCastRateCo 1.3.6.1.4.1.1141.3.5.1.1.6 integer read-write
Limit of maximum number of broadcast packets per second allowed upstream.
             stuEtherStickyBitCtrl 1.3.6.1.4.1.1141.3.5.1.1.7 integer read-write
When the Sticky Bit control is enabled, a MAC table entry will not be replaced by another MAC address for at least one aging period. Default disable. Enumeration: 'enable': 2, 'disable': 1.
             stuEther8021QEnable 1.3.6.1.4.1.1141.3.5.1.1.8 integer read-write
Enables both 802.1Q priority queuing and the filter of 802.1Q format packets. Default disable. Enumeration: 'enable': 2, 'disable': 1.
             stuEtherNonSnapRej 1.3.6.1.4.1.1141.3.5.1.1.9 integer read-write
This attribute controls the filtering of 802.2 non- SNAP encoded packets. Ethernet type filtering must be enabled to activate this feature. Default disable. Enumeration: 'enable': 2, 'disable': 1.
             stuEtherIgmpEnable 1.3.6.1.4.1.1141.3.5.1.1.10 integer read-write
This attribute controls the forwarding of IGMP multicast traffic upstream. This attribute will override any other multicast filtering in the case of IGMP packets. Default is enable. Enumeration: 'enable': 2, 'disable': 1.
             stuEtherNonIpMultiEn 1.3.6.1.4.1.1141.3.5.1.1.11 integer read-write
This attribute controls the forwarding of non-IP multicast traffic upstream. This attribute will override any other multicast filtering in the case of non-IP multicast packets. Default is enable. Enumeration: 'enable': 2, 'disable': 1.
             stuEtherBcmpOnly 1.3.6.1.4.1.1141.3.5.1.1.12 integer read-write
When this attribute is enabled, all non-BCMP traffic will be rejected in both the upstream and downstream. This attribute is utilized in a Spannong Tree implementation. Default is disable. Enumeration: 'enable': 2, 'disable': 1.
             stuEtherIgmpSnoopEnable 1.3.6.1.4.1.1141.3.5.1.1.13 integer read-write
This attribute controls the snooping of IGMP multicast traffic upstream. Default is disable. Enumeration: 'enable': 2, 'disable': 1.
 com21StuEtherTypeGroup 1.3.6.1.4.1.1141.3.6
     com21StuEtherTypeTable 1.3.6.1.4.1.1141.3.6.1 no-access
.
         com21StuFiltEthTypeEntry 1.3.6.1.4.1.1141.3.6.1.1 no-access
Holds Ethernet Types codes that are to be passed upstream. Maximum of 6 entries.
             stuFiltEtherMacAddr 1.3.6.1.4.1.1141.3.6.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
             stuFiltEtherType 1.3.6.1.4.1.1141.3.6.1.1.2 integer read-only
Holds Ethernet Type codes that is to be passed upstream. Held on ComPort.
             stuFiltEtherStatus 1.3.6.1.4.1.1141.3.6.1.1.3 com21rowstatus read-only
This attribute is used to create or delete Ethernet Type entry.
 com21StuFiltIpMultiGroup 1.3.6.1.4.1.1141.3.7
     com21StuFiltIpMultiTable 1.3.6.1.4.1.1141.3.7.1 no-access
.
         com21StuFiltIpMultiEntry 1.3.6.1.4.1.1141.3.7.1.1 no-access
Holds IP Multicast Addresses that are to be allowed in either upstream, or downstream, or both directions. Maximum of 16 entries.
             stuFiltIpMacAddr 1.3.6.1.4.1.1141.3.7.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
             stuFiltIpMultiAddr 1.3.6.1.4.1.1141.3.7.1.1.2 macaddress read-only
Holds Multicast Address. Held on ComPort. Valid values are within the range of MAC addresses of 01.00.5E.00.00.00 to 01.00.5E.7F.FF.FF
             stuFiltIpMultiStatus 1.3.6.1.4.1.1141.3.7.1.1.3 com21rowstatus read-only
Used to delete or create an entry.
             stuFiltIpDirectCntrl 1.3.6.1.4.1.1141.3.7.1.1.4 integer read-write
Used to control the filter direction. Default is bothDirections. Enumeration: 'upstreamOnly': 1, 'downstreamOnly': 2, 'bothDirections': 3.
 com21StuEtherMacGroup 1.3.6.1.4.1.1141.3.8
     com21StuEtherMacTable 1.3.6.1.4.1.1141.3.8.1 no-access
.
         com21StuEtherMacEntry 1.3.6.1.4.1.1141.3.8.1.1 no-access
Holds Ethernet MAC address that are to be processed as specified. Maximum of 8 entries.
             stuEtherStuMac 1.3.6.1.4.1.1141.3.8.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
             stuEtherMacAddr 1.3.6.1.4.1.1141.3.8.1.1.2 macaddress read-only
Holds MAC address. Held on ComPort.
             stuEtherMacType 1.3.6.1.4.1.1141.3.8.1.1.3 integer read-write
Holds action to be performed upon packets of the specified MAC address. In the case of the learned MAC address, this entry becomes read only. Held on ComPort. Enumeration: 'learned': 1, 'reject': 4, 'processor': 2, 'upstream': 3.
             stuEtherMacStatus 1.3.6.1.4.1.1141.3.8.1.1.4 com21rowstatus read-only
Used to create or delete an entry.
 com21StuEtherStatsGroup 1.3.6.1.4.1.1141.3.9
     com21StuEtherStatsTable 1.3.6.1.4.1.1141.3.9.1 no-access
.
         com21StuEtherStatsEntry 1.3.6.1.4.1.1141.3.9.1.1 no-access
.
             stuEthStatsMacAddr 1.3.6.1.4.1.1141.3.9.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
             stuCurrEtherRunts 1.3.6.1.4.1.1141.3.9.1.1.2 gauge32 read-only
Contains number of runt packets received by the ComPort in the current 15minute period. This data is held on the ComPort.
             stuCurrEtherCollitns 1.3.6.1.4.1.1141.3.9.1.1.3 gauge32 read-only
Contains number of collisions detected by the ComPort in the current 15minute period. This data is held on the ComPort.
             stuCurrEtherFramErrs 1.3.6.1.4.1.1141.3.9.1.1.4 gauge32 read-only
Contains number of Ethernet Packets with Framing Errors detected by the ComPort in the current 15minute period. This data is held on the ComPort.
             stuCurrEtherCrcErrs 1.3.6.1.4.1.1141.3.9.1.1.5 gauge32 read-only
Contains number of Ethernet Packets with CRC Errors detected by the ComPort in the current 15minute period. This data is held on the ComPort.
             stuCurrEtherCrcThres 1.3.6.1.4.1.1141.3.9.1.1.6 integer32 read-write
contains 15minute error level at which a threshold trap shall be generated. This is mapped to theComPort alarm severity entry stuThresholdLevel. Default is 0 - threshold disabled.
             stuCurrEtherTxUnder 1.3.6.1.4.1.1141.3.9.1.1.7 gauge32 read-only
Contains number of times Ethernet TX FIFO Underflow occurred on transmit queue in the current 15minute period.
             stuCurrEtherRxOver 1.3.6.1.4.1.1141.3.9.1.1.8 gauge32 read-only
Contains number of times Ethernet RX FIFO Overflow occurred on a receive queue in the current 15minute period.
             stuCurrEtherDropFrms 1.3.6.1.4.1.1141.3.9.1.1.9 gauge32 read-only
Contains number of receive frames dropped by MACE controller in the current 15minute period.
             stuPrevEtherRunts 1.3.6.1.4.1.1141.3.9.1.1.10 gauge32 read-only
Contains number of runt packets received by the ComPort in the previous 15minute period. This data is held on the ComPort.
             stuPrevEtherCollitns 1.3.6.1.4.1.1141.3.9.1.1.11 gauge32 read-only
Contains number of collisions detected by the ComPort in the previous 15minute period. This data is held on the ComPort.
             stuPrevEtherFramErrs 1.3.6.1.4.1.1141.3.9.1.1.12 gauge32 read-only
Contains number of Ethernet Packets with Framing Errors detected by the ComPort in the previous 15minute period. This data is held on the ComPort.
             stuPrevEtherCrcErrs 1.3.6.1.4.1.1141.3.9.1.1.13 gauge32 read-only
Contains number of Ethernet Packets with CRC Errors detected by the ComPort in the previous 15minute period. This data is held on the ComPort.
             stuPrevEtherTxUnder 1.3.6.1.4.1.1141.3.9.1.1.14 gauge32 read-only
Contains number of times Ethernet TX FIFO Underflow occurred on transmit queue in the previous 15minute period.
             stuPrevEtherRxOver 1.3.6.1.4.1.1141.3.9.1.1.15 gauge32 read-only
Contains number of times Ethernet RX FIFO Overflow occurred on a receive queue in the previous 15minute period.
             stuPrevEtherDropFrms 1.3.6.1.4.1.1141.3.9.1.1.16 gauge32 read-only
Contains number of receive frames dropped by MACE controller in the previous 15minute period.
             stuEtherConnState 1.3.6.1.4.1.1141.3.9.1.1.17 integer read-only
Contains state of Ethernet connection. Enumeration: 'unint': 1, 'is': 2, 'oos': 3.
             stuEtherClearStats 1.3.6.1.4.1.1141.3.9.1.1.18 integer read-write
This attribute is used to clear all Ethernet statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr. Enumeration: 'clear': 2, 'nil': 1.
 com21StuStatsGroup 1.3.6.1.4.1.1141.3.10
       com21StuStatsTable 1.3.6.1.4.1.1141.3.10.1 no-access
.
           com21StuStatsEntry 1.3.6.1.4.1.1141.3.10.1.1 no-access
.
               stuStatsMacAddress 1.3.6.1.4.1.1141.3.10.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
               stuStatsCurrAtmTei 1.3.6.1.4.1.1141.3.10.1.1.2 gauge32 read-only
Number of cells received with transport errors - uncorrectable FEC or HEC errors - in the current 15minute period.
               stuAtmTeiThreshold 1.3.6.1.4.1.1141.3.10.1.1.3 integer32 read-write
contains 15minute transport error level at which a threshold trap shall be generated. Default is 0 - threshold disabled.
               stuStatsCurrAtmHec 1.3.6.1.4.1.1141.3.10.1.1.4 gauge32 read-only
Number of cells received with HEC or Encryption errors in the current 15minute period.
               stuAtmHecThreshold 1.3.6.1.4.1.1141.3.10.1.1.5 integer32 read-write
contains 15minute HEC error level at which a threshold trap shall be generated. Default is 0 - threshold disabled.
               stuStatsCurrESMin 1.3.6.1.4.1.1141.3.10.1.1.6 gauge32 read-only
Represents the number of errored seconds in the current 15 minute period.
               stuESMinThreshold 1.3.6.1.4.1.1141.3.10.1.1.7 integer32 read-write
contains 15minute errored seconds level at which a threshold trap shall be generated. Default is 0 - threshold disabled.
               stuStatsCurrFecCorrect 1.3.6.1.4.1.1141.3.10.1.1.8 gauge32 read-only
Fecs corrected by Demodulator on Downstream in the current 15 minute period.
               stuFecCorrectThreshold 1.3.6.1.4.1.1141.3.10.1.1.9 integer32 read-write
contains 15minute Fecs corrected level at which a threshold trap shall be generated. Default is 0 - threshold disabled.
               stuStatsCurrUASMin 1.3.6.1.4.1.1141.3.10.1.1.10 gauge32 read-only
Represents the number of unavailable seconds in the current 15 minute period.
               stuStatsPrevAtmTei 1.3.6.1.4.1.1141.3.10.1.1.11 gauge32 read-only
Number of cells received with transport errors - HEC or uncorrectable FEC errors - in the previous 15minute period.
               stuStatsPrevAtmHec 1.3.6.1.4.1.1141.3.10.1.1.12 gauge32 read-only
Number of cells received with HEC or Encryption errors in the previous 15minute period.
               stuStatsPrevESMin 1.3.6.1.4.1.1141.3.10.1.1.13 gauge32 read-only
Represents the number of errored seconds in the previous 15 minute period.
               stuStatsPrevFecCorrect 1.3.6.1.4.1.1141.3.10.1.1.14 gauge32 read-only
Fecs corrected by Demodulator on Downstream in the previous 15 minute period.
               stuStatsPrevUASMin 1.3.6.1.4.1.1141.3.10.1.1.15 gauge32 read-only
Represents the number of unavailable seconds in the previous 15 minute period.
               stuStatsClearStats 1.3.6.1.4.1.1141.3.10.1.1.16 integer read-write
This attribute is used to clear the all ComPort statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr. Enumeration: 'clear': 2, 'nil': 1.
 com21StuQStatsGroup 1.3.6.1.4.1.1141.3.11
       com21StuQStatsTable 1.3.6.1.4.1.1141.3.11.1 no-access
.
           com21StuQStatsEntry 1.3.6.1.4.1.1141.3.11.1.1 no-access
.
               stuAtmStuMacAddr 1.3.6.1.4.1.1141.3.11.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
               stuAtmStuQNo 1.3.6.1.4.1.1141.3.11.1.1.2 integer32 read-only
This index consists of a number representing a Mongoose queue. For initial phase this number shall equal the associated VCI number. i.e. Ethernet or Telephony VCIs. This VCI number shall be mapped to a Mongoose queue id by the ComController. For 3.0 there is only a single Ethernet queue - queue 5.
               stuAtmStatsCurrMinRx 1.3.6.1.4.1.1141.3.11.1.1.3 gauge32 read-only
Represents the number of cells or frames successfully received in the current 15 minute period.
               stuAtmStatsCurrMinRxDropped 1.3.6.1.4.1.1141.3.11.1.1.4 gauge32 read-only
Represents the number of cells or frames dropped in the current 15 minute period.
               stuAtmStatsCurrMinCRCErrors 1.3.6.1.4.1.1141.3.11.1.1.5 gauge32 read-only
Represents the number of cells or frames received with CRC errors in the current 15 minute period.
               stuAtmStatsPrevMinRx 1.3.6.1.4.1.1141.3.11.1.1.6 gauge32 read-only
Represents the number of cells or frames successfully received in the previous 15 minute period.
               stuAtmStatsPrevMinRxDropped 1.3.6.1.4.1.1141.3.11.1.1.7 gauge32 read-only
Represents the number of cells or frames dropped in the previous 15 minute period.
               stuAtmStatsPrevMinCRCErrors 1.3.6.1.4.1.1141.3.11.1.1.8 gauge32 read-only
Represents the number of cells or frames received with CRC errors in the previous 15 minute period.
               stuAtmStatsClearStats 1.3.6.1.4.1.1141.3.11.1.1.9 integer read-write
This attribute is used to clear the ComPort queue statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wrapCurr. Enumeration: 'clear': 2, 'nil': 1.
 com21StuAlarmSevGroup 1.3.6.1.4.1.1141.3.12
       com21StuAlarmSevTable 1.3.6.1.4.1.1141.3.12.1 no-access
.
           com21StuAlarmSevEntry 1.3.6.1.4.1.1141.3.12.1.1 no-access
.
               stuAlmSevMacAddress 1.3.6.1.4.1.1141.3.12.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device.
               stuAlmSevCrcThres 1.3.6.1.4.1.1141.3.12.1.1.2 alarmseverity read-write
Specifies the CRC Error Threshold alarm severity. Default Minor.
               stuAlmSevTeiThres 1.3.6.1.4.1.1141.3.12.1.1.3 alarmseverity read-write
Specifies the TEI Threshold alarm severity. Default Minor.
               stuAlmSevHecThres 1.3.6.1.4.1.1141.3.12.1.1.4 alarmseverity read-write
Specifies the HEC Error Threshold alarm severity. Default Minor.
               stuAlmSevEsThres 1.3.6.1.4.1.1141.3.12.1.1.5 alarmseverity read-write
Specifies the Errored Seconds Threshold alarm severity. Default Minor.
               stuAlmSevFecThres 1.3.6.1.4.1.1141.3.12.1.1.6 alarmseverity read-write
Specifies the Corrected FEC Threshold alarm severity. Default Minor.
 com21StuCodeImageGroup 1.3.6.1.4.1.1141.3.13
       com21StuCodeImageTable 1.3.6.1.4.1.1141.3.13.1 no-access
.
           com21StuCodeImageEntry 1.3.6.1.4.1.1141.3.13.1.1 no-access
.
               stuCodeStuMacAddr 1.3.6.1.4.1.1141.3.13.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device. Held on ComController.
               stuCodeImageIndex 1.3.6.1.4.1.1141.3.13.1.1.2 integer read-only
Index to receive information about various images; VxWorks - operating system. ApplicationStu - Image comprising Stu Application, DownloadImage - Image downloaded into DRAM. Enumeration: 'applicationSt': 2, 'vxWorksImage': 1, 'downloadImage': 3.
               stuCodeImageType 1.3.6.1.4.1.1141.3.13.1.1.3 integer read-only
Code image identifier. vxWorks - boot code and OS, boot memory resident, stuBoot - backup application image, boot memory resident, stuNewapp - primary application image, app memory resident, stuDnld - downloaded application supplement (optional), updateApp - downloaded flash update, updates app flash, updateBoth - downloaded flash update, updates boot+app flash. Enumeration: 'updateBoth': 9, 'vxWorks': 11, 'updateApp': 5, 'stuDnld': 4, 'stuNewapp': 3, 'stuBoot': 1, 'reserved5': 10, 'reserved4': 8, 'reserved1': 2, 'reserved3': 7, 'reserved2': 6.
               stuCodeImageVersion 1.3.6.1.4.1.1141.3.13.1.1.4 displaystring read-only
Version Description for the Code Image.
               stuCodeImageBuildDir 1.3.6.1.4.1.1141.3.13.1.1.5 displaystring read-only
Directory name where image was built.
               stuCodeImageDate 1.3.6.1.4.1.1141.3.13.1.1.6 displaystring read-only
Date when the image is built.
               stuCodeImageTime 1.3.6.1.4.1.1141.3.13.1.1.7 displaystring read-only
Time when the image is built.
 com21StuVoiceChanStatsGroup 1.3.6.1.4.1.1141.3.14
       com21StuVoiceChanStatsTable 1.3.6.1.4.1.1141.3.14.1 no-access
.
           com21StuVoiceChanStatsEntry 1.3.6.1.4.1.1141.3.14.1.1 no-access
.
               stuVoiceChanStatsMacAddr 1.3.6.1.4.1.1141.3.14.1.1.1 macaddress read-only
Contains IEEE 802 medium access control address of the ComPort device.
               stuVoiceChanStatsNum 1.3.6.1.4.1.1141.3.14.1.1.2 integer read-only
Defines the voice port on the Comport device used for Voice.
               stuVoiceChanStatsCurrLostCellCnt 1.3.6.1.4.1.1141.3.14.1.1.3 integer32 read-only
Defines the number of times the Comport's voice port received Cells out of sequence in the current 15-min period.
               stuVoiceChanStatsCurrDrpdCellCnt 1.3.6.1.4.1.1141.3.14.1.1.4 integer32 read-only
Defines the number of times the Comport's voice port dropped cells due to Queue Full in the current 15-min period.
               stuVoiceChanStatsCurrCrc3ErrCnt 1.3.6.1.4.1.1141.3.14.1.1.5 integer32 read-only
Defines the number of cells Comport's voice port received with CRC3 Errors in the current 15-min period.
               stuVoiceChanStatsCurrSetUpFailCnt 1.3.6.1.4.1.1141.3.14.1.1.6 integer32 read-only
Defines the number of times the Comport's voice port had to drop the calls due to Call Setup Failure in the current 15-min period.
               stuVoiceChanStatsCurrTxVoiceCellCnt 1.3.6.1.4.1.1141.3.14.1.1.7 integer32 read-only
Defines the number of Voice cells Comport's voice port Queued to Transmit in the current 15-min period.
               stuVoiceChanStatsCurrRxVoiceCellCnt 1.3.6.1.4.1.1141.3.14.1.1.8 integer32 read-only
Defines the number of Voice cells the Comport's voice port received in the current 15-min period.
               stuVoiceChanStatsCurrTxOamCellCnt 1.3.6.1.4.1.1141.3.14.1.1.9 integer32 read-only
Defines the number of OAM cells Comport's voice port Queued to Transmit in the current 15-min period.
               stuVoiceChanStatsCurrRxOamCellCnt 1.3.6.1.4.1.1141.3.14.1.1.10 integer32 read-only
Defines the number of OAM cells the Comport's voice port received in the current 15-min period.
               stuVoiceChanStatsPrevLostCellCnt 1.3.6.1.4.1.1141.3.14.1.1.11 integer32 read-only
Defines the number of times the Comport's voice port received Cells out of sequence in the previous 15-min period.
               stuVoiceChanStatsPrevDrpdCellCnt 1.3.6.1.4.1.1141.3.14.1.1.12 integer32 read-only
Defines the number of times the Comport's voice port dropped cells due to Queue Full in the previous 15-min period.
               stuVoiceChanStatsPrevCrc3ErrCnt 1.3.6.1.4.1.1141.3.14.1.1.13 integer32 read-only
Defines the number of cells Comport's voice port received with CRC3 Errors in the previous 15-min period.
               stuVoiceChanStatsPrevSetUpFailCnt 1.3.6.1.4.1.1141.3.14.1.1.14 integer32 read-only
Defines the number of times the Comport's voice port had to drop the calls due to Call Setup Failure in the previous 15-min period.
               stuVoiceChanStatsPrevTxVoiceCellCnt 1.3.6.1.4.1.1141.3.14.1.1.15 integer32 read-only
Defines the number of Voice cells Comport's voice port Tranmitted in the previous 15-min period
               stuVoiceChanStatsPrevRxVoiceCellCnt 1.3.6.1.4.1.1141.3.14.1.1.16 integer32 read-only
Defines the number of times the Comport's voice port received Cells out of sequence in the previous 15-min period.
               stuVoiceChanStatsPrevTxOamCellCnt 1.3.6.1.4.1.1141.3.14.1.1.17 integer32 read-only
Defines the number of times the Comport's voice port received Cells out of sequence in the previous 15-min period.
               stuVoiceChanStatsPrevRxOamCellCnt 1.3.6.1.4.1.1141.3.14.1.1.18 integer32 read-only
Defines the number of times the Comport's voice port received Cells out of sequence in the previous 15-min period.
               stuVoiceChanStatsClear 1.3.6.1.4.1.1141.3.14.1.1.19 integer read-write
Provides the capability to clear the statistics. Clearing of statistics allowed only if hcxStatsControl attribute is set to wrapCurr. Enumeration: 'clear': 2, 'nil': 1.
 stuOperationStateChange 1.3.6.1.4.1.1141.4.110
.
 stuXmitFeqChange 1.3.6.1.4.1.1141.4.111
This trap is generated whenever an ComPort is hopped. It will not be generated at initial acquisition.
 stuEtherCrcThres 1.3.6.1.4.1.1141.4.112
.
 stuAtmTeiThres 1.3.6.1.4.1.1141.4.113
.
 stuAtmHecThres 1.3.6.1.4.1.1141.4.114
.
 stuESMinThres 1.3.6.1.4.1.1141.4.115
.
 stuFecCorrectThres 1.3.6.1.4.1.1141.4.116
.
 stuOutOfSpecRFCond 1.3.6.1.4.1.1141.4.117
This trap is generated whenever an ComPort is acquired with out of spec signal quality condition. The trap trap is issued after the GO-SET-DONE message.
 stuMaceFail 1.3.6.1.4.1.1141.4.119
This trap would be sent after ComPort is completely booted. That is, at least download is completed. Event will be detected during POST (Power On Self Test)